// Copyright 2018 The Dawn & Tint Authors
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice, this
//    list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright notice,
//    this list of conditions and the following disclaimer in the documentation
//    and/or other materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its
//    contributors may be used to endorse or promote products derived from
//    this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

#include "dawn/tests/unittests/validation/ValidationTest.h"

#include "dawn/utils/ComboRenderPipelineDescriptor.h"
#include "dawn/utils/WGPUHelpers.h"

namespace dawn {
namespace {

class QueueSubmitValidationTest : public ValidationTest {};

// Test submitting with a mapped buffer is disallowed
TEST_F(QueueSubmitValidationTest, SubmitWithMappedBuffer) {
    // Create a map-write buffer.
    const uint64_t kBufferSize = 4;
    wgpu::BufferDescriptor descriptor;
    descriptor.usage = wgpu::BufferUsage::MapWrite | wgpu::BufferUsage::CopySrc;
    descriptor.size = kBufferSize;
    wgpu::Buffer buffer = device.CreateBuffer(&descriptor);

    // Create a fake copy destination buffer
    descriptor.usage = wgpu::BufferUsage::CopyDst;
    wgpu::Buffer targetBuffer = device.CreateBuffer(&descriptor);

    // Create a command buffer that reads from the mappable buffer.
    wgpu::CommandBuffer commands;
    {
        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        encoder.CopyBufferToBuffer(buffer, 0, targetBuffer, 0, kBufferSize);
        commands = encoder.Finish();
    }

    wgpu::Queue queue = device.GetQueue();

    // Submitting when the buffer has never been mapped should succeed
    queue.Submit(1, &commands);

    {
        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        encoder.CopyBufferToBuffer(buffer, 0, targetBuffer, 0, kBufferSize);
        commands = encoder.Finish();
    }

    // Map the buffer, submitting when the buffer is mapped should fail
    buffer.MapAsync(wgpu::MapMode::Write, 0, kBufferSize, wgpu::CallbackMode::AllowProcessEvents,
                    [](wgpu::MapAsyncStatus, wgpu::StringView) {});

    // Try submitting before the callback is fired.
    ASSERT_DEVICE_ERROR(queue.Submit(1, &commands));

    WaitForAllOperations();

    {
        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        encoder.CopyBufferToBuffer(buffer, 0, targetBuffer, 0, kBufferSize);
        commands = encoder.Finish();
    }

    // Try submitting after the callback is fired.
    ASSERT_DEVICE_ERROR(queue.Submit(1, &commands));

    {
        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        encoder.CopyBufferToBuffer(buffer, 0, targetBuffer, 0, kBufferSize);
        commands = encoder.Finish();
    }

    // Unmap the buffer, queue submit should succeed
    buffer.Unmap();
    queue.Submit(1, &commands);
}

// Test it is invalid to submit a command buffer twice
TEST_F(QueueSubmitValidationTest, CommandBufferSubmittedTwice) {
    wgpu::CommandBuffer commandBuffer = device.CreateCommandEncoder().Finish();
    wgpu::Queue queue = device.GetQueue();

    // Should succeed
    queue.Submit(1, &commandBuffer);

    // Should fail because command buffer was already submitted
    ASSERT_DEVICE_ERROR(queue.Submit(1, &commandBuffer));
}

// Test resubmitting failed command buffers
TEST_F(QueueSubmitValidationTest, CommandBufferSubmittedFailed) {
    // Create a map-write buffer
    const uint64_t kBufferSize = 4;
    wgpu::BufferDescriptor descriptor;
    descriptor.usage = wgpu::BufferUsage::MapWrite | wgpu::BufferUsage::CopySrc;
    descriptor.size = kBufferSize;
    wgpu::Buffer buffer = device.CreateBuffer(&descriptor);

    // Create a destination buffer for the b2b copy
    descriptor.usage = wgpu::BufferUsage::CopyDst;
    descriptor.size = kBufferSize;
    wgpu::Buffer targetBuffer = device.CreateBuffer(&descriptor);

    // Create a command buffer that reads from the mappable buffer
    wgpu::CommandBuffer commands;
    {
        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        encoder.CopyBufferToBuffer(buffer, 0, targetBuffer, 0, kBufferSize);
        commands = encoder.Finish();
    }

    wgpu::Queue queue = device.GetQueue();

    // Map the source buffer to force a failure
    buffer.MapAsync(wgpu::MapMode::Write, 0, kBufferSize, wgpu::CallbackMode::AllowProcessEvents,
                    [](wgpu::MapAsyncStatus, wgpu::StringView) {});

    // Submitting a command buffer with a mapped buffer should fail
    ASSERT_DEVICE_ERROR(queue.Submit(1, &commands));

    // Unmap buffer to fix the failure
    buffer.Unmap();

    // Resubmitting any command buffer, even if the problem was fixed, should fail
    ASSERT_DEVICE_ERROR(queue.Submit(1, &commands));
}

// Test that submitting in a buffer mapping callback doesn't cause re-entrance problems.
TEST_F(QueueSubmitValidationTest, SubmitInBufferMapCallback) {
    // Create a buffer for mapping, to run our callback.
    wgpu::BufferDescriptor descriptor;
    descriptor.size = 4;
    descriptor.usage = wgpu::BufferUsage::MapWrite;
    wgpu::Buffer buffer = device.CreateBuffer(&descriptor);

    buffer.MapAsync(wgpu::MapMode::Write, 0, descriptor.size,
                    wgpu::CallbackMode::AllowProcessEvents,
                    [buffer, queue = device.GetQueue()](wgpu::MapAsyncStatus, wgpu::StringView) {
                        buffer.Unmap();
                        queue.Submit(0, nullptr);
                    });

    WaitForAllOperations();
}

// Test that submitting in a render pipeline creation callback doesn't cause re-entrance
// problems.
TEST_F(QueueSubmitValidationTest, SubmitInCreateRenderPipelineAsyncCallback) {
    wgpu::ShaderModule vsModule = utils::CreateShaderModule(device, R"(
            @vertex fn main() -> @builtin(position) vec4f {
                return vec4f(0.0, 0.0, 0.0, 1.0);
            })");

    wgpu::ShaderModule fsModule = utils::CreateShaderModule(device, R"(
            @fragment fn main() -> @location(0) vec4f {
                return vec4f(0.0, 1.0, 0.0, 1.0);
            })");

    utils::ComboRenderPipelineDescriptor descriptor;
    descriptor.vertex.module = vsModule;
    descriptor.cFragment.module = fsModule;
    device.CreateRenderPipelineAsync(
        &descriptor, wgpu::CallbackMode::AllowProcessEvents,
        [device = this->device](wgpu::CreatePipelineAsyncStatus, wgpu::RenderPipeline pipeline,
                                wgpu::StringView) {
            pipeline = nullptr;
            device.GetQueue().Submit(0, nullptr);
        });

    WaitForAllOperations();
}

// Test that submitting in a compute pipeline creation callback doesn't cause re-entrance
// problems.
TEST_F(QueueSubmitValidationTest, SubmitInCreateComputePipelineAsyncCallback) {
    wgpu::ComputePipelineDescriptor descriptor;
    descriptor.compute.module = utils::CreateShaderModule(device, R"(
            @compute @workgroup_size(1) fn main() {
            })");
    device.CreateComputePipelineAsync(
        &descriptor, wgpu::CallbackMode::AllowProcessEvents,
        [device = this->device](wgpu::CreatePipelineAsyncStatus, wgpu::ComputePipeline pipeline,
                                wgpu::StringView) {
            pipeline = nullptr;
            device.GetQueue().Submit(0, nullptr);
        });

    WaitForAllOperations();
}

// Test that buffers in unused compute pass bindgroups are still checked for in
// Queue::Submit validation.
TEST_F(QueueSubmitValidationTest, SubmitWithUnusedComputeBuffer) {
    wgpu::Queue queue = device.GetQueue();

    wgpu::BindGroupLayout emptyBGL = utils::MakeBindGroupLayout(device, {});
    wgpu::BindGroup emptyBG = utils::MakeBindGroup(device, emptyBGL, {});

    wgpu::BindGroupLayout testBGL = utils::MakeBindGroupLayout(
        device, {{0, wgpu::ShaderStage::Compute, wgpu::BufferBindingType::Storage}});

    // In this test we check that BindGroup 1 is checked, the texture test will check
    // BindGroup 2. This is to provide coverage of for loops in validation code.
    wgpu::ComputePipelineDescriptor cpDesc;
    cpDesc.layout = utils::MakePipelineLayout(device, {emptyBGL, testBGL});
    cpDesc.compute.module =
        utils::CreateShaderModule(device, "@compute @workgroup_size(1) fn main() {}");
    wgpu::ComputePipeline pipeline = device.CreateComputePipeline(&cpDesc);

    wgpu::BufferDescriptor bufDesc;
    bufDesc.size = 4;
    bufDesc.usage = wgpu::BufferUsage::Storage;

    // Test that completely unused bindgroups still have their buffers checked.
    for (bool destroy : {true, false}) {
        wgpu::Buffer unusedBuffer = device.CreateBuffer(&bufDesc);
        wgpu::BindGroup unusedBG = utils::MakeBindGroup(device, testBGL, {{0, unusedBuffer}});

        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
        pass.SetBindGroup(1, unusedBG);
        pass.End();
        wgpu::CommandBuffer commands = encoder.Finish();

        if (destroy) {
            unusedBuffer.Destroy();
            ASSERT_DEVICE_ERROR(queue.Submit(1, &commands));
        } else {
            queue.Submit(1, &commands);
        }
    }

    // Test that unused bindgroups because they were replaced still have their buffers checked.
    for (bool destroy : {true, false}) {
        wgpu::Buffer unusedBuffer = device.CreateBuffer(&bufDesc);
        wgpu::BindGroup unusedBG = utils::MakeBindGroup(device, testBGL, {{0, unusedBuffer}});

        wgpu::Buffer usedBuffer = device.CreateBuffer(&bufDesc);
        wgpu::BindGroup usedBG = utils::MakeBindGroup(device, testBGL, {{0, unusedBuffer}});

        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
        pass.SetBindGroup(0, emptyBG);
        pass.SetBindGroup(1, unusedBG);
        pass.SetBindGroup(1, usedBG);
        pass.SetPipeline(pipeline);
        pass.DispatchWorkgroups(1);
        pass.End();
        wgpu::CommandBuffer commands = encoder.Finish();

        if (destroy) {
            unusedBuffer.Destroy();
            ASSERT_DEVICE_ERROR(queue.Submit(1, &commands));
        } else {
            queue.Submit(1, &commands);
        }
    }
}

// Test that textures in unused compute pass bindgroups are still checked for in
// Queue::Submit validation.
TEST_F(QueueSubmitValidationTest, SubmitWithUnusedComputeTextures) {
    wgpu::Queue queue = device.GetQueue();

    wgpu::BindGroupLayout emptyBGL = utils::MakeBindGroupLayout(device, {});
    wgpu::BindGroup emptyBG = utils::MakeBindGroup(device, emptyBGL, {});

    wgpu::BindGroupLayout testBGL = utils::MakeBindGroupLayout(
        device, {{0, wgpu::ShaderStage::Compute, wgpu::TextureSampleType::Float}});

    wgpu::ComputePipelineDescriptor cpDesc;
    cpDesc.layout = utils::MakePipelineLayout(device, {emptyBGL, emptyBGL, testBGL});
    cpDesc.compute.module =
        utils::CreateShaderModule(device, "@compute @workgroup_size(1) fn main() {}");
    wgpu::ComputePipeline pipeline = device.CreateComputePipeline(&cpDesc);

    wgpu::TextureDescriptor texDesc;
    texDesc.size = {1, 1, 1};
    texDesc.usage = wgpu::TextureUsage::TextureBinding;
    texDesc.format = wgpu::TextureFormat::RGBA8Unorm;

    // Test that completely unused bindgroups still have their buffers checked.
    for (bool destroy : {true, false}) {
        wgpu::Texture unusedTexture = device.CreateTexture(&texDesc);
        wgpu::BindGroup unusedBG =
            utils::MakeBindGroup(device, testBGL, {{0, unusedTexture.CreateView()}});

        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
        pass.SetBindGroup(2, unusedBG);
        pass.End();
        wgpu::CommandBuffer commands = encoder.Finish();

        if (destroy) {
            unusedTexture.Destroy();
            ASSERT_DEVICE_ERROR(queue.Submit(1, &commands));
        } else {
            queue.Submit(1, &commands);
        }
    }

    // Test that unused bindgroups because they were replaced still have their buffers checked.
    for (bool destroy : {true, false}) {
        wgpu::Texture unusedTexture = device.CreateTexture(&texDesc);
        wgpu::BindGroup unusedBG =
            utils::MakeBindGroup(device, testBGL, {{0, unusedTexture.CreateView()}});

        wgpu::Texture usedTexture = device.CreateTexture(&texDesc);
        wgpu::BindGroup usedBG =
            utils::MakeBindGroup(device, testBGL, {{0, unusedTexture.CreateView()}});

        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
        pass.SetBindGroup(0, emptyBG);
        pass.SetBindGroup(1, emptyBG);
        pass.SetBindGroup(2, unusedBG);
        pass.SetBindGroup(2, usedBG);
        pass.SetPipeline(pipeline);
        pass.DispatchWorkgroups(1);
        pass.End();
        wgpu::CommandBuffer commands = encoder.Finish();

        if (destroy) {
            unusedTexture.Destroy();
            ASSERT_DEVICE_ERROR(queue.Submit(1, &commands));
        } else {
            queue.Submit(1, &commands);
        }
    }
}

// Test that storage textures in compute pass bindgroups are checked in
// Queue::Submit validation. Regression test for crbug.com/1516756.
TEST_F(QueueSubmitValidationTest, SubmitWithDestroyedComputeStorageTexture) {
    wgpu::Queue queue = device.GetQueue();

    wgpu::BindGroupLayout testBGL = utils::MakeBindGroupLayout(
        device, {{0, wgpu::ShaderStage::Compute, wgpu::StorageTextureAccess::WriteOnly,
                  wgpu::TextureFormat::RGBA8Unorm}});

    wgpu::ComputePipelineDescriptor cpDesc;
    cpDesc.layout = utils::MakePipelineLayout(device, {testBGL});
    cpDesc.compute.module =
        utils::CreateShaderModule(device, "@compute @workgroup_size(1) fn main() {}");
    wgpu::ComputePipeline pipeline = device.CreateComputePipeline(&cpDesc);

    wgpu::TextureDescriptor texDesc;
    texDesc.size = {1, 1, 1};
    texDesc.usage = wgpu::TextureUsage::StorageBinding;
    texDesc.format = wgpu::TextureFormat::RGBA8Unorm;

    for (bool destroy : {true, false}) {
        wgpu::Texture texture = device.CreateTexture(&texDesc);
        wgpu::BindGroup bg = utils::MakeBindGroup(device, testBGL, {{0, texture.CreateView()}});

        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
        pass.SetBindGroup(0, bg);
        pass.End();
        wgpu::CommandBuffer commands = encoder.Finish();

        if (destroy) {
            texture.Destroy();
            ASSERT_DEVICE_ERROR(queue.Submit(1, &commands));
        } else {
            queue.Submit(1, &commands);
        }
    }
}

}  // anonymous namespace
}  // namespace dawn