blob: 3774b8f826ce067ab37788f1d5c3832fd79e04d7 [file] [log] [blame]
// Copyright 2017 The Dawn Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "dawn_native/metal/CommandBufferMTL.h"
#include "dawn_native/BindGroupTracker.h"
#include "dawn_native/CommandEncoder.h"
#include "dawn_native/Commands.h"
#include "dawn_native/RenderBundle.h"
#include "dawn_native/metal/BindGroupMTL.h"
#include "dawn_native/metal/BufferMTL.h"
#include "dawn_native/metal/ComputePipelineMTL.h"
#include "dawn_native/metal/DeviceMTL.h"
#include "dawn_native/metal/PipelineLayoutMTL.h"
#include "dawn_native/metal/RenderPipelineMTL.h"
#include "dawn_native/metal/SamplerMTL.h"
#include "dawn_native/metal/TextureMTL.h"
namespace dawn_native { namespace metal {
namespace {
// Allows this file to use MTLStoreActionStoreAndMultismapleResolve because the logic is
// first to compute what the "best" Metal render pass descriptor is, then fix it up if we
// are not on macOS 10.12 (i.e. the EmulateStoreAndMSAAResolve toggle is on).
#pragma clang diagnostic push
#pragma clang diagnostic ignored "-Wunguarded-availability"
constexpr MTLStoreAction kMTLStoreActionStoreAndMultisampleResolve =
MTLStoreActionStoreAndMultisampleResolve;
#pragma clang diagnostic pop
// Creates an autoreleased MTLRenderPassDescriptor matching desc
MTLRenderPassDescriptor* CreateMTLRenderPassDescriptor(BeginRenderPassCmd* renderPass) {
MTLRenderPassDescriptor* descriptor = [MTLRenderPassDescriptor renderPassDescriptor];
for (uint32_t i :
IterateBitSet(renderPass->attachmentState->GetColorAttachmentsMask())) {
auto& attachmentInfo = renderPass->colorAttachments[i];
switch (attachmentInfo.loadOp) {
case wgpu::LoadOp::Clear:
descriptor.colorAttachments[i].loadAction = MTLLoadActionClear;
descriptor.colorAttachments[i].clearColor = MTLClearColorMake(
attachmentInfo.clearColor.r, attachmentInfo.clearColor.g,
attachmentInfo.clearColor.b, attachmentInfo.clearColor.a);
break;
case wgpu::LoadOp::Load:
descriptor.colorAttachments[i].loadAction = MTLLoadActionLoad;
break;
default:
UNREACHABLE();
break;
}
descriptor.colorAttachments[i].texture =
ToBackend(attachmentInfo.view->GetTexture())->GetMTLTexture();
descriptor.colorAttachments[i].level = attachmentInfo.view->GetBaseMipLevel();
descriptor.colorAttachments[i].slice = attachmentInfo.view->GetBaseArrayLayer();
bool hasResolveTarget = attachmentInfo.resolveTarget.Get() != nullptr;
switch (attachmentInfo.storeOp) {
case wgpu::StoreOp::Store:
if (hasResolveTarget) {
descriptor.colorAttachments[i].resolveTexture =
ToBackend(attachmentInfo.resolveTarget->GetTexture())
->GetMTLTexture();
descriptor.colorAttachments[i].resolveLevel =
attachmentInfo.resolveTarget->GetBaseMipLevel();
descriptor.colorAttachments[i].resolveSlice =
attachmentInfo.resolveTarget->GetBaseArrayLayer();
descriptor.colorAttachments[i].storeAction =
kMTLStoreActionStoreAndMultisampleResolve;
} else {
descriptor.colorAttachments[i].storeAction = MTLStoreActionStore;
}
break;
case wgpu::StoreOp::Clear:
descriptor.colorAttachments[i].storeAction = MTLStoreActionDontCare;
break;
default:
UNREACHABLE();
break;
}
}
if (renderPass->attachmentState->HasDepthStencilAttachment()) {
auto& attachmentInfo = renderPass->depthStencilAttachment;
id<MTLTexture> texture =
ToBackend(attachmentInfo.view->GetTexture())->GetMTLTexture();
const Format& format = attachmentInfo.view->GetTexture()->GetFormat();
if (format.HasDepth()) {
descriptor.depthAttachment.texture = texture;
descriptor.depthAttachment.level = attachmentInfo.view->GetBaseMipLevel();
descriptor.depthAttachment.slice = attachmentInfo.view->GetBaseArrayLayer();
switch (attachmentInfo.depthStoreOp) {
case wgpu::StoreOp::Store:
descriptor.depthAttachment.storeAction = MTLStoreActionStore;
break;
case wgpu::StoreOp::Clear:
descriptor.depthAttachment.storeAction = MTLStoreActionDontCare;
break;
default:
UNREACHABLE();
break;
}
switch (attachmentInfo.depthLoadOp) {
case wgpu::LoadOp::Clear:
descriptor.depthAttachment.loadAction = MTLLoadActionClear;
descriptor.depthAttachment.clearDepth = attachmentInfo.clearDepth;
break;
case wgpu::LoadOp::Load:
descriptor.depthAttachment.loadAction = MTLLoadActionLoad;
break;
default:
UNREACHABLE();
break;
}
}
if (format.HasStencil()) {
descriptor.stencilAttachment.texture = texture;
descriptor.stencilAttachment.level = attachmentInfo.view->GetBaseMipLevel();
descriptor.stencilAttachment.slice = attachmentInfo.view->GetBaseArrayLayer();
switch (attachmentInfo.stencilStoreOp) {
case wgpu::StoreOp::Store:
descriptor.stencilAttachment.storeAction = MTLStoreActionStore;
break;
case wgpu::StoreOp::Clear:
descriptor.stencilAttachment.storeAction = MTLStoreActionDontCare;
break;
default:
UNREACHABLE();
break;
}
switch (attachmentInfo.stencilLoadOp) {
case wgpu::LoadOp::Clear:
descriptor.stencilAttachment.loadAction = MTLLoadActionClear;
descriptor.stencilAttachment.clearStencil = attachmentInfo.clearStencil;
break;
case wgpu::LoadOp::Load:
descriptor.stencilAttachment.loadAction = MTLLoadActionLoad;
break;
default:
UNREACHABLE();
break;
}
}
}
return descriptor;
}
// Helper function for Toggle EmulateStoreAndMSAAResolve
void ResolveInAnotherRenderPass(
CommandRecordingContext* commandContext,
const MTLRenderPassDescriptor* mtlRenderPass,
const std::array<id<MTLTexture>, kMaxColorAttachments>& resolveTextures) {
MTLRenderPassDescriptor* mtlRenderPassForResolve =
[MTLRenderPassDescriptor renderPassDescriptor];
for (uint32_t i = 0; i < kMaxColorAttachments; ++i) {
if (resolveTextures[i] == nil) {
continue;
}
mtlRenderPassForResolve.colorAttachments[i].texture =
mtlRenderPass.colorAttachments[i].texture;
mtlRenderPassForResolve.colorAttachments[i].loadAction = MTLLoadActionLoad;
mtlRenderPassForResolve.colorAttachments[i].storeAction =
MTLStoreActionMultisampleResolve;
mtlRenderPassForResolve.colorAttachments[i].resolveTexture = resolveTextures[i];
mtlRenderPassForResolve.colorAttachments[i].resolveLevel =
mtlRenderPass.colorAttachments[i].resolveLevel;
mtlRenderPassForResolve.colorAttachments[i].resolveSlice =
mtlRenderPass.colorAttachments[i].resolveSlice;
}
commandContext->BeginRender(mtlRenderPassForResolve);
commandContext->EndRender();
}
// Helper functions for Toggle AlwaysResolveIntoZeroLevelAndLayer
id<MTLTexture> CreateResolveTextureForWorkaround(Device* device,
MTLPixelFormat mtlFormat,
uint32_t width,
uint32_t height) {
MTLTextureDescriptor* mtlDesc = [MTLTextureDescriptor new];
mtlDesc.textureType = MTLTextureType2D;
mtlDesc.usage = MTLTextureUsageRenderTarget;
mtlDesc.pixelFormat = mtlFormat;
mtlDesc.width = width;
mtlDesc.height = height;
mtlDesc.depth = 1;
mtlDesc.mipmapLevelCount = 1;
mtlDesc.arrayLength = 1;
mtlDesc.storageMode = MTLStorageModePrivate;
mtlDesc.sampleCount = 1;
id<MTLTexture> resolveTexture =
[device->GetMTLDevice() newTextureWithDescriptor:mtlDesc];
[mtlDesc release];
return resolveTexture;
}
void CopyIntoTrueResolveTarget(CommandRecordingContext* commandContext,
id<MTLTexture> mtlTrueResolveTexture,
uint32_t trueResolveLevel,
uint32_t trueResolveSlice,
id<MTLTexture> temporaryResolveTexture,
uint32_t width,
uint32_t height) {
[commandContext->EnsureBlit() copyFromTexture:temporaryResolveTexture
sourceSlice:0
sourceLevel:0
sourceOrigin:MTLOriginMake(0, 0, 0)
sourceSize:MTLSizeMake(width, height, 1)
toTexture:mtlTrueResolveTexture
destinationSlice:trueResolveSlice
destinationLevel:trueResolveLevel
destinationOrigin:MTLOriginMake(0, 0, 0)];
}
// Metal uses a physical addressing mode which means buffers in the shading language are
// just pointers to the virtual address of their start. This means there is no way to know
// the length of a buffer to compute the length() of unsized arrays at the end of storage
// buffers. SPIRV-Cross implements the length() of unsized arrays by requiring an extra
// buffer that contains the length of other buffers. This structure that keeps track of the
// length of storage buffers and can apply them to the reserved "buffer length buffer" when
// needed for a draw or a dispatch.
struct StorageBufferLengthTracker {
wgpu::ShaderStage dirtyStages = wgpu::ShaderStage::None;
// The lengths of buffers are stored as 32bit integers because that is the width the
// MSL code generated by SPIRV-Cross expects.
PerStage<std::array<uint32_t, kGenericMetalBufferSlots>> data;
void Apply(id<MTLRenderCommandEncoder> render, RenderPipeline* pipeline) {
wgpu::ShaderStage stagesToApply =
dirtyStages & pipeline->GetStagesRequiringStorageBufferLength();
if (stagesToApply == wgpu::ShaderStage::None) {
return;
}
if (stagesToApply & wgpu::ShaderStage::Vertex) {
uint32_t bufferCount = ToBackend(pipeline->GetLayout())
->GetBufferBindingCount(SingleShaderStage::Vertex);
[render setVertexBytes:data[SingleShaderStage::Vertex].data()
length:sizeof(uint32_t) * bufferCount
atIndex:kBufferLengthBufferSlot];
}
if (stagesToApply & wgpu::ShaderStage::Fragment) {
uint32_t bufferCount = ToBackend(pipeline->GetLayout())
->GetBufferBindingCount(SingleShaderStage::Fragment);
[render setFragmentBytes:data[SingleShaderStage::Fragment].data()
length:sizeof(uint32_t) * bufferCount
atIndex:kBufferLengthBufferSlot];
}
// Only mark clean stages that were actually applied.
dirtyStages ^= stagesToApply;
}
void Apply(id<MTLComputeCommandEncoder> compute, ComputePipeline* pipeline) {
if (!(dirtyStages & wgpu::ShaderStage::Compute)) {
return;
}
if (!pipeline->RequiresStorageBufferLength()) {
return;
}
uint32_t bufferCount = ToBackend(pipeline->GetLayout())
->GetBufferBindingCount(SingleShaderStage::Compute);
[compute setBytes:data[SingleShaderStage::Compute].data()
length:sizeof(uint32_t) * bufferCount
atIndex:kBufferLengthBufferSlot];
dirtyStages ^= wgpu::ShaderStage::Compute;
}
};
struct TextureBufferCopySplit {
static constexpr uint32_t kMaxTextureBufferCopyRegions = 3;
struct CopyInfo {
NSUInteger bufferOffset;
NSUInteger bytesPerRow;
NSUInteger bytesPerImage;
MTLOrigin textureOrigin;
MTLSize copyExtent;
};
uint32_t count = 0;
std::array<CopyInfo, kMaxTextureBufferCopyRegions> copies;
};
MTLOrigin MakeMTLOrigin(Origin3D origin) {
return MTLOriginMake(origin.x, origin.y, origin.z);
}
TextureBufferCopySplit ComputeTextureBufferCopySplit(Origin3D origin,
Extent3D copyExtent,
Format textureFormat,
Extent3D virtualSizeAtLevel,
uint64_t bufferSize,
uint64_t bufferOffset,
uint32_t bytesPerRow,
uint32_t rowsPerImage) {
TextureBufferCopySplit copy;
// When copying textures from/to an unpacked buffer, the Metal validation layer doesn't
// compute the correct range when checking if the buffer is big enough to contain the
// data for the whole copy. Instead of looking at the position of the last texel in the
// buffer, it computes the volume of the 3D box with bytesPerRow * (rowsPerImage /
// format.blockHeight) * copySize.depth. For example considering the pixel buffer below
// where in memory, each row data (D) of the texture is followed by some padding data
// (P):
// |DDDDDDD|PP|
// |DDDDDDD|PP|
// |DDDDDDD|PP|
// |DDDDDDD|PP|
// |DDDDDDA|PP|
// The last pixel read will be A, but the driver will think it is the whole last padding
// row, causing it to generate an error when the pixel buffer is just big enough.
// We work around this limitation by detecting when Metal would complain and copy the
// last image and row separately using tight sourceBytesPerRow or sourceBytesPerImage.
uint32_t dataRowsPerImage = rowsPerImage / textureFormat.blockHeight;
uint32_t bytesPerImage = bytesPerRow * dataRowsPerImage;
// Metal validation layer requires that if the texture's pixel format is a compressed
// format, the sourceSize must be a multiple of the pixel format's block size or be
// clamped to the edge of the texture if the block extends outside the bounds of a
// texture.
uint32_t clampedCopyExtentWidth =
(origin.x + copyExtent.width > virtualSizeAtLevel.width)
? (virtualSizeAtLevel.width - origin.x)
: copyExtent.width;
uint32_t clampedCopyExtentHeight =
(origin.y + copyExtent.height > virtualSizeAtLevel.height)
? (virtualSizeAtLevel.height - origin.y)
: copyExtent.height;
// Check whether buffer size is big enough.
bool needWorkaround = bufferSize - bufferOffset < bytesPerImage * copyExtent.depth;
if (!needWorkaround) {
copy.count = 1;
copy.copies[0].bufferOffset = bufferOffset;
copy.copies[0].bytesPerRow = bytesPerRow;
copy.copies[0].bytesPerImage = bytesPerImage;
copy.copies[0].textureOrigin = MakeMTLOrigin(origin);
copy.copies[0].copyExtent =
MTLSizeMake(clampedCopyExtentWidth, clampedCopyExtentHeight, copyExtent.depth);
return copy;
}
uint64_t currentOffset = bufferOffset;
// Doing all the copy except the last image.
if (copyExtent.depth > 1) {
copy.copies[copy.count].bufferOffset = currentOffset;
copy.copies[copy.count].bytesPerRow = bytesPerRow;
copy.copies[copy.count].bytesPerImage = bytesPerImage;
copy.copies[copy.count].textureOrigin = MakeMTLOrigin(origin);
copy.copies[copy.count].copyExtent = MTLSizeMake(
clampedCopyExtentWidth, clampedCopyExtentHeight, copyExtent.depth - 1);
++copy.count;
// Update offset to copy to the last image.
currentOffset += (copyExtent.depth - 1) * bytesPerImage;
}
// Doing all the copy in last image except the last row.
uint32_t copyBlockRowCount = copyExtent.height / textureFormat.blockHeight;
if (copyBlockRowCount > 1) {
copy.copies[copy.count].bufferOffset = currentOffset;
copy.copies[copy.count].bytesPerRow = bytesPerRow;
copy.copies[copy.count].bytesPerImage = bytesPerRow * (copyBlockRowCount - 1);
copy.copies[copy.count].textureOrigin =
MTLOriginMake(origin.x, origin.y, origin.z + copyExtent.depth - 1);
ASSERT(copyExtent.height - textureFormat.blockHeight < virtualSizeAtLevel.height);
copy.copies[copy.count].copyExtent = MTLSizeMake(
clampedCopyExtentWidth, copyExtent.height - textureFormat.blockHeight, 1);
++copy.count;
// Update offset to copy to the last row.
currentOffset += (copyBlockRowCount - 1) * bytesPerRow;
}
// Doing the last row copy with the exact number of bytes in last row.
// Workaround this issue in a way just like the copy to a 1D texture.
uint32_t lastRowDataSize =
(copyExtent.width / textureFormat.blockWidth) * textureFormat.blockByteSize;
uint32_t lastRowCopyExtentHeight =
textureFormat.blockHeight + clampedCopyExtentHeight - copyExtent.height;
ASSERT(lastRowCopyExtentHeight <= textureFormat.blockHeight);
copy.copies[copy.count].bufferOffset = currentOffset;
copy.copies[copy.count].bytesPerRow = lastRowDataSize;
copy.copies[copy.count].bytesPerImage = lastRowDataSize;
copy.copies[copy.count].textureOrigin =
MTLOriginMake(origin.x, origin.y + copyExtent.height - textureFormat.blockHeight,
origin.z + copyExtent.depth - 1);
copy.copies[copy.count].copyExtent =
MTLSizeMake(clampedCopyExtentWidth, lastRowCopyExtentHeight, 1);
++copy.count;
return copy;
}
void EnsureSourceTextureInitialized(Texture* texture,
const Extent3D& size,
const TextureCopy& src) {
texture->EnsureSubresourceContentInitialized(src.mipLevel, 1, src.arrayLayer,
size.depth);
}
void EnsureDestinationTextureInitialized(Texture* texture,
const Extent3D& size,
const TextureCopy& dst) {
if (IsCompleteSubresourceCopiedTo(texture, size, dst.mipLevel)) {
texture->SetIsSubresourceContentInitialized(true, dst.mipLevel, 1, dst.arrayLayer,
size.depth);
} else {
texture->EnsureSubresourceContentInitialized(dst.mipLevel, 1, dst.arrayLayer,
size.depth);
}
}
// Keeps track of the dirty bind groups so they can be lazily applied when we know the
// pipeline state.
// Bind groups may be inherited because bind groups are packed in the buffer /
// texture tables in contiguous order.
class BindGroupTracker : public BindGroupTrackerBase<true, uint64_t> {
public:
explicit BindGroupTracker(StorageBufferLengthTracker* lengthTracker)
: BindGroupTrackerBase(), mLengthTracker(lengthTracker) {
}
template <typename Encoder>
void Apply(Encoder encoder) {
for (uint32_t index : IterateBitSet(mDirtyBindGroupsObjectChangedOrIsDynamic)) {
ApplyBindGroup(encoder, index, ToBackend(mBindGroups[index]),
mDynamicOffsetCounts[index], mDynamicOffsets[index].data(),
ToBackend(mPipelineLayout));
}
DidApply();
}
private:
// Handles a call to SetBindGroup, directing the commands to the correct encoder.
// There is a single function that takes both encoders to factor code. Other approaches
// like templates wouldn't work because the name of methods are different between the
// two encoder types.
void ApplyBindGroupImpl(id<MTLRenderCommandEncoder> render,
id<MTLComputeCommandEncoder> compute,
uint32_t index,
BindGroup* group,
uint32_t dynamicOffsetCount,
uint64_t* dynamicOffsets,
PipelineLayout* pipelineLayout) {
uint32_t currentDynamicBufferIndex = 0;
// TODO(kainino@chromium.org): Maintain buffers and offsets arrays in BindGroup
// so that we only have to do one setVertexBuffers and one setFragmentBuffers
// call here.
for (BindingIndex bindingIndex = 0;
bindingIndex < group->GetLayout()->GetBindingCount(); ++bindingIndex) {
const BindingInfo& bindingInfo =
group->GetLayout()->GetBindingInfo(bindingIndex);
bool hasVertStage =
bindingInfo.visibility & wgpu::ShaderStage::Vertex && render != nil;
bool hasFragStage =
bindingInfo.visibility & wgpu::ShaderStage::Fragment && render != nil;
bool hasComputeStage =
bindingInfo.visibility & wgpu::ShaderStage::Compute && compute != nil;
uint32_t vertIndex = 0;
uint32_t fragIndex = 0;
uint32_t computeIndex = 0;
if (hasVertStage) {
vertIndex = pipelineLayout->GetBindingIndexInfo(
SingleShaderStage::Vertex)[index][bindingIndex];
}
if (hasFragStage) {
fragIndex = pipelineLayout->GetBindingIndexInfo(
SingleShaderStage::Fragment)[index][bindingIndex];
}
if (hasComputeStage) {
computeIndex = pipelineLayout->GetBindingIndexInfo(
SingleShaderStage::Compute)[index][bindingIndex];
}
switch (bindingInfo.type) {
case wgpu::BindingType::UniformBuffer:
case wgpu::BindingType::StorageBuffer:
case wgpu::BindingType::ReadonlyStorageBuffer: {
const BufferBinding& binding =
group->GetBindingAsBufferBinding(bindingIndex);
const id<MTLBuffer> buffer = ToBackend(binding.buffer)->GetMTLBuffer();
NSUInteger offset = binding.offset;
// TODO(shaobo.yan@intel.com): Record bound buffer status to use
// setBufferOffset to achieve better performance.
if (bindingInfo.hasDynamicOffset) {
offset += dynamicOffsets[currentDynamicBufferIndex];
currentDynamicBufferIndex++;
}
if (hasVertStage) {
mLengthTracker->data[SingleShaderStage::Vertex][vertIndex] =
binding.size;
mLengthTracker->dirtyStages |= wgpu::ShaderStage::Vertex;
[render setVertexBuffers:&buffer
offsets:&offset
withRange:NSMakeRange(vertIndex, 1)];
}
if (hasFragStage) {
mLengthTracker->data[SingleShaderStage::Fragment][fragIndex] =
binding.size;
mLengthTracker->dirtyStages |= wgpu::ShaderStage::Fragment;
[render setFragmentBuffers:&buffer
offsets:&offset
withRange:NSMakeRange(fragIndex, 1)];
}
if (hasComputeStage) {
mLengthTracker->data[SingleShaderStage::Compute][computeIndex] =
binding.size;
mLengthTracker->dirtyStages |= wgpu::ShaderStage::Compute;
[compute setBuffers:&buffer
offsets:&offset
withRange:NSMakeRange(computeIndex, 1)];
}
break;
}
case wgpu::BindingType::Sampler:
case wgpu::BindingType::ComparisonSampler: {
auto sampler = ToBackend(group->GetBindingAsSampler(bindingIndex));
if (hasVertStage) {
[render setVertexSamplerState:sampler->GetMTLSamplerState()
atIndex:vertIndex];
}
if (hasFragStage) {
[render setFragmentSamplerState:sampler->GetMTLSamplerState()
atIndex:fragIndex];
}
if (hasComputeStage) {
[compute setSamplerState:sampler->GetMTLSamplerState()
atIndex:computeIndex];
}
break;
}
case wgpu::BindingType::SampledTexture:
case wgpu::BindingType::ReadonlyStorageTexture:
case wgpu::BindingType::WriteonlyStorageTexture: {
auto textureView =
ToBackend(group->GetBindingAsTextureView(bindingIndex));
if (hasVertStage) {
[render setVertexTexture:textureView->GetMTLTexture()
atIndex:vertIndex];
}
if (hasFragStage) {
[render setFragmentTexture:textureView->GetMTLTexture()
atIndex:fragIndex];
}
if (hasComputeStage) {
[compute setTexture:textureView->GetMTLTexture()
atIndex:computeIndex];
}
break;
}
case wgpu::BindingType::StorageTexture:
UNREACHABLE();
break;
}
}
}
template <typename... Args>
void ApplyBindGroup(id<MTLRenderCommandEncoder> encoder, Args&&... args) {
ApplyBindGroupImpl(encoder, nil, std::forward<Args&&>(args)...);
}
template <typename... Args>
void ApplyBindGroup(id<MTLComputeCommandEncoder> encoder, Args&&... args) {
ApplyBindGroupImpl(nil, encoder, std::forward<Args&&>(args)...);
}
StorageBufferLengthTracker* mLengthTracker;
};
// Keeps track of the dirty vertex buffer values so they can be lazily applied when we know
// all the relevant state.
class VertexBufferTracker {
public:
void OnSetVertexBuffer(uint32_t slot, Buffer* buffer, uint64_t offset) {
mVertexBuffers[slot] = buffer->GetMTLBuffer();
mVertexBufferOffsets[slot] = offset;
// Use 64 bit masks and make sure there are no shift UB
static_assert(kMaxVertexBuffers <= 8 * sizeof(unsigned long long) - 1, "");
mDirtyVertexBuffers |= 1ull << slot;
}
void OnSetPipeline(RenderPipeline* lastPipeline, RenderPipeline* pipeline) {
// When a new pipeline is bound we must set all the vertex buffers again because
// they might have been offset by the pipeline layout, and they might be packed
// differently from the previous pipeline.
mDirtyVertexBuffers |= pipeline->GetVertexBufferSlotsUsed();
}
void Apply(id<MTLRenderCommandEncoder> encoder, RenderPipeline* pipeline) {
std::bitset<kMaxVertexBuffers> vertexBuffersToApply =
mDirtyVertexBuffers & pipeline->GetVertexBufferSlotsUsed();
for (uint32_t dawnIndex : IterateBitSet(vertexBuffersToApply)) {
uint32_t metalIndex = pipeline->GetMtlVertexBufferIndex(dawnIndex);
[encoder setVertexBuffers:&mVertexBuffers[dawnIndex]
offsets:&mVertexBufferOffsets[dawnIndex]
withRange:NSMakeRange(metalIndex, 1)];
}
mDirtyVertexBuffers.reset();
}
private:
// All the indices in these arrays are Dawn vertex buffer indices
std::bitset<kMaxVertexBuffers> mDirtyVertexBuffers;
std::array<id<MTLBuffer>, kMaxVertexBuffers> mVertexBuffers;
std::array<NSUInteger, kMaxVertexBuffers> mVertexBufferOffsets;
};
} // anonymous namespace
CommandBuffer::CommandBuffer(CommandEncoder* encoder, const CommandBufferDescriptor* descriptor)
: CommandBufferBase(encoder, descriptor), mCommands(encoder->AcquireCommands()) {
}
CommandBuffer::~CommandBuffer() {
FreeCommands(&mCommands);
}
void CommandBuffer::FillCommands(CommandRecordingContext* commandContext) {
const std::vector<PassResourceUsage>& passResourceUsages = GetResourceUsages().perPass;
size_t nextPassNumber = 0;
auto LazyClearForPass = [](const PassResourceUsage& usages) {
for (size_t i = 0; i < usages.textures.size(); ++i) {
Texture* texture = ToBackend(usages.textures[i]);
// Clear textures that are not output attachments. Output attachments will be
// cleared in CreateMTLRenderPassDescriptor by setting the loadop to clear when the
// texture subresource has not been initialized before the render pass.
if (!(usages.textureUsages[i].usage & wgpu::TextureUsage::OutputAttachment)) {
texture->EnsureSubresourceContentInitialized(0, texture->GetNumMipLevels(), 0,
texture->GetArrayLayers());
}
}
};
Command type;
while (mCommands.NextCommandId(&type)) {
switch (type) {
case Command::BeginComputePass: {
mCommands.NextCommand<BeginComputePassCmd>();
LazyClearForPass(passResourceUsages[nextPassNumber]);
commandContext->EndBlit();
EncodeComputePass(commandContext);
nextPassNumber++;
break;
}
case Command::BeginRenderPass: {
BeginRenderPassCmd* cmd = mCommands.NextCommand<BeginRenderPassCmd>();
LazyClearForPass(passResourceUsages[nextPassNumber]);
commandContext->EndBlit();
LazyClearRenderPassAttachments(cmd);
MTLRenderPassDescriptor* descriptor = CreateMTLRenderPassDescriptor(cmd);
EncodeRenderPass(commandContext, descriptor, cmd->width, cmd->height);
nextPassNumber++;
break;
}
case Command::CopyBufferToBuffer: {
CopyBufferToBufferCmd* copy = mCommands.NextCommand<CopyBufferToBufferCmd>();
[commandContext->EnsureBlit()
copyFromBuffer:ToBackend(copy->source)->GetMTLBuffer()
sourceOffset:copy->sourceOffset
toBuffer:ToBackend(copy->destination)->GetMTLBuffer()
destinationOffset:copy->destinationOffset
size:copy->size];
break;
}
case Command::CopyBufferToTexture: {
CopyBufferToTextureCmd* copy = mCommands.NextCommand<CopyBufferToTextureCmd>();
auto& src = copy->source;
auto& dst = copy->destination;
auto& copySize = copy->copySize;
Buffer* buffer = ToBackend(src.buffer.Get());
Texture* texture = ToBackend(dst.texture.Get());
EnsureDestinationTextureInitialized(texture, copy->copySize, copy->destination);
Extent3D virtualSizeAtLevel = texture->GetMipLevelVirtualSize(dst.mipLevel);
TextureBufferCopySplit splittedCopies = ComputeTextureBufferCopySplit(
dst.origin, copySize, texture->GetFormat(), virtualSizeAtLevel,
buffer->GetSize(), src.offset, src.bytesPerRow, src.rowsPerImage);
for (uint32_t i = 0; i < splittedCopies.count; ++i) {
const TextureBufferCopySplit::CopyInfo& copyInfo = splittedCopies.copies[i];
[commandContext->EnsureBlit() copyFromBuffer:buffer->GetMTLBuffer()
sourceOffset:copyInfo.bufferOffset
sourceBytesPerRow:copyInfo.bytesPerRow
sourceBytesPerImage:copyInfo.bytesPerImage
sourceSize:copyInfo.copyExtent
toTexture:texture->GetMTLTexture()
destinationSlice:dst.arrayLayer
destinationLevel:dst.mipLevel
destinationOrigin:copyInfo.textureOrigin];
}
break;
}
case Command::CopyTextureToBuffer: {
CopyTextureToBufferCmd* copy = mCommands.NextCommand<CopyTextureToBufferCmd>();
auto& src = copy->source;
auto& dst = copy->destination;
auto& copySize = copy->copySize;
Texture* texture = ToBackend(src.texture.Get());
Buffer* buffer = ToBackend(dst.buffer.Get());
EnsureSourceTextureInitialized(texture, copy->copySize, copy->source);
Extent3D virtualSizeAtLevel = texture->GetMipLevelVirtualSize(src.mipLevel);
TextureBufferCopySplit splittedCopies = ComputeTextureBufferCopySplit(
src.origin, copySize, texture->GetFormat(), virtualSizeAtLevel,
buffer->GetSize(), dst.offset, dst.bytesPerRow, dst.rowsPerImage);
for (uint32_t i = 0; i < splittedCopies.count; ++i) {
const TextureBufferCopySplit::CopyInfo& copyInfo = splittedCopies.copies[i];
[commandContext->EnsureBlit() copyFromTexture:texture->GetMTLTexture()
sourceSlice:src.arrayLayer
sourceLevel:src.mipLevel
sourceOrigin:copyInfo.textureOrigin
sourceSize:copyInfo.copyExtent
toBuffer:buffer->GetMTLBuffer()
destinationOffset:copyInfo.bufferOffset
destinationBytesPerRow:copyInfo.bytesPerRow
destinationBytesPerImage:copyInfo.bytesPerImage];
}
break;
}
case Command::CopyTextureToTexture: {
CopyTextureToTextureCmd* copy =
mCommands.NextCommand<CopyTextureToTextureCmd>();
Texture* srcTexture = ToBackend(copy->source.texture.Get());
Texture* dstTexture = ToBackend(copy->destination.texture.Get());
EnsureSourceTextureInitialized(srcTexture, copy->copySize, copy->source);
EnsureDestinationTextureInitialized(dstTexture, copy->copySize,
copy->destination);
// TODO(jiawei.shao@intel.com): support copies with 1D and 3D textures.
ASSERT(srcTexture->GetDimension() == wgpu::TextureDimension::e2D &&
dstTexture->GetDimension() == wgpu::TextureDimension::e2D);
const MTLSize mtlSizeOneLayer =
MTLSizeMake(copy->copySize.width, copy->copySize.height, 1);
for (uint32_t slice = 0; slice < copy->copySize.depth; ++slice) {
[commandContext->EnsureBlit()
copyFromTexture:srcTexture->GetMTLTexture()
sourceSlice:copy->source.arrayLayer + slice
sourceLevel:copy->source.mipLevel
sourceOrigin:MakeMTLOrigin(copy->source.origin)
sourceSize:mtlSizeOneLayer
toTexture:dstTexture->GetMTLTexture()
destinationSlice:copy->destination.arrayLayer + slice
destinationLevel:copy->destination.mipLevel
destinationOrigin:MakeMTLOrigin(copy->destination.origin)];
}
break;
}
default: {
UNREACHABLE();
break;
}
}
}
commandContext->EndBlit();
}
void CommandBuffer::EncodeComputePass(CommandRecordingContext* commandContext) {
ComputePipeline* lastPipeline = nullptr;
StorageBufferLengthTracker storageBufferLengths = {};
BindGroupTracker bindGroups(&storageBufferLengths);
id<MTLComputeCommandEncoder> encoder = commandContext->BeginCompute();
Command type;
while (mCommands.NextCommandId(&type)) {
switch (type) {
case Command::EndComputePass: {
mCommands.NextCommand<EndComputePassCmd>();
commandContext->EndCompute();
return;
}
case Command::Dispatch: {
DispatchCmd* dispatch = mCommands.NextCommand<DispatchCmd>();
bindGroups.Apply(encoder);
storageBufferLengths.Apply(encoder, lastPipeline);
[encoder dispatchThreadgroups:MTLSizeMake(dispatch->x, dispatch->y, dispatch->z)
threadsPerThreadgroup:lastPipeline->GetLocalWorkGroupSize()];
break;
}
case Command::DispatchIndirect: {
DispatchIndirectCmd* dispatch = mCommands.NextCommand<DispatchIndirectCmd>();
bindGroups.Apply(encoder);
storageBufferLengths.Apply(encoder, lastPipeline);
Buffer* buffer = ToBackend(dispatch->indirectBuffer.Get());
id<MTLBuffer> indirectBuffer = buffer->GetMTLBuffer();
[encoder dispatchThreadgroupsWithIndirectBuffer:indirectBuffer
indirectBufferOffset:dispatch->indirectOffset
threadsPerThreadgroup:lastPipeline
->GetLocalWorkGroupSize()];
break;
}
case Command::SetComputePipeline: {
SetComputePipelineCmd* cmd = mCommands.NextCommand<SetComputePipelineCmd>();
lastPipeline = ToBackend(cmd->pipeline).Get();
bindGroups.OnSetPipeline(lastPipeline);
lastPipeline->Encode(encoder);
break;
}
case Command::SetBindGroup: {
SetBindGroupCmd* cmd = mCommands.NextCommand<SetBindGroupCmd>();
uint32_t* dynamicOffsets = nullptr;
if (cmd->dynamicOffsetCount > 0) {
dynamicOffsets = mCommands.NextData<uint32_t>(cmd->dynamicOffsetCount);
}
bindGroups.OnSetBindGroup(cmd->index, ToBackend(cmd->group.Get()),
cmd->dynamicOffsetCount, dynamicOffsets);
break;
}
case Command::InsertDebugMarker: {
InsertDebugMarkerCmd* cmd = mCommands.NextCommand<InsertDebugMarkerCmd>();
char* label = mCommands.NextData<char>(cmd->length + 1);
NSString* mtlLabel = [[NSString alloc] initWithUTF8String:label];
[encoder insertDebugSignpost:mtlLabel];
[mtlLabel release];
break;
}
case Command::PopDebugGroup: {
mCommands.NextCommand<PopDebugGroupCmd>();
[encoder popDebugGroup];
break;
}
case Command::PushDebugGroup: {
PushDebugGroupCmd* cmd = mCommands.NextCommand<PushDebugGroupCmd>();
char* label = mCommands.NextData<char>(cmd->length + 1);
NSString* mtlLabel = [[NSString alloc] initWithUTF8String:label];
[encoder pushDebugGroup:mtlLabel];
[mtlLabel release];
break;
}
default: {
UNREACHABLE();
break;
}
}
}
// EndComputePass should have been called
UNREACHABLE();
}
void CommandBuffer::EncodeRenderPass(CommandRecordingContext* commandContext,
MTLRenderPassDescriptor* mtlRenderPass,
uint32_t width,
uint32_t height) {
ASSERT(mtlRenderPass);
Device* device = ToBackend(GetDevice());
// Handle Toggle AlwaysResolveIntoZeroLevelAndLayer. We must handle this before applying
// the store + MSAA resolve workaround, otherwise this toggle will never be handled because
// the resolve texture is removed when applying the store + MSAA resolve workaround.
if (device->IsToggleEnabled(Toggle::AlwaysResolveIntoZeroLevelAndLayer)) {
std::array<id<MTLTexture>, kMaxColorAttachments> trueResolveTextures = {};
std::array<uint32_t, kMaxColorAttachments> trueResolveLevels = {};
std::array<uint32_t, kMaxColorAttachments> trueResolveSlices = {};
// Use temporary resolve texture on the resolve targets with non-zero resolveLevel or
// resolveSlice.
bool useTemporaryResolveTexture = false;
std::array<id<MTLTexture>, kMaxColorAttachments> temporaryResolveTextures = {};
for (uint32_t i = 0; i < kMaxColorAttachments; ++i) {
if (mtlRenderPass.colorAttachments[i].resolveTexture == nil) {
continue;
}
if (mtlRenderPass.colorAttachments[i].resolveLevel == 0 &&
mtlRenderPass.colorAttachments[i].resolveSlice == 0) {
continue;
}
trueResolveTextures[i] = mtlRenderPass.colorAttachments[i].resolveTexture;
trueResolveLevels[i] = mtlRenderPass.colorAttachments[i].resolveLevel;
trueResolveSlices[i] = mtlRenderPass.colorAttachments[i].resolveSlice;
const MTLPixelFormat mtlFormat = trueResolveTextures[i].pixelFormat;
temporaryResolveTextures[i] =
CreateResolveTextureForWorkaround(device, mtlFormat, width, height);
mtlRenderPass.colorAttachments[i].resolveTexture = temporaryResolveTextures[i];
mtlRenderPass.colorAttachments[i].resolveLevel = 0;
mtlRenderPass.colorAttachments[i].resolveSlice = 0;
useTemporaryResolveTexture = true;
}
// If we need to use a temporary resolve texture we need to copy the result of MSAA
// resolve back to the true resolve targets.
if (useTemporaryResolveTexture) {
EncodeRenderPass(commandContext, mtlRenderPass, width, height);
for (uint32_t i = 0; i < kMaxColorAttachments; ++i) {
if (trueResolveTextures[i] == nil) {
continue;
}
ASSERT(temporaryResolveTextures[i] != nil);
CopyIntoTrueResolveTarget(commandContext, trueResolveTextures[i],
trueResolveLevels[i], trueResolveSlices[i],
temporaryResolveTextures[i], width, height);
[temporaryResolveTextures[i] release];
temporaryResolveTextures[i] = nil;
}
return;
}
}
// Handle Store + MSAA resolve workaround (Toggle EmulateStoreAndMSAAResolve).
if (device->IsToggleEnabled(Toggle::EmulateStoreAndMSAAResolve)) {
bool hasStoreAndMSAAResolve = false;
// Remove any store + MSAA resolve and remember them.
std::array<id<MTLTexture>, kMaxColorAttachments> resolveTextures = {};
for (uint32_t i = 0; i < kMaxColorAttachments; ++i) {
if (mtlRenderPass.colorAttachments[i].storeAction ==
kMTLStoreActionStoreAndMultisampleResolve) {
hasStoreAndMSAAResolve = true;
resolveTextures[i] = mtlRenderPass.colorAttachments[i].resolveTexture;
mtlRenderPass.colorAttachments[i].storeAction = MTLStoreActionStore;
mtlRenderPass.colorAttachments[i].resolveTexture = nil;
}
}
// If we found a store + MSAA resolve we need to resolve in a different render pass.
if (hasStoreAndMSAAResolve) {
EncodeRenderPass(commandContext, mtlRenderPass, width, height);
ResolveInAnotherRenderPass(commandContext, mtlRenderPass, resolveTextures);
return;
}
}
EncodeRenderPassInternal(commandContext, mtlRenderPass, width, height);
}
void CommandBuffer::EncodeRenderPassInternal(CommandRecordingContext* commandContext,
MTLRenderPassDescriptor* mtlRenderPass,
uint32_t width,
uint32_t height) {
RenderPipeline* lastPipeline = nullptr;
id<MTLBuffer> indexBuffer = nil;
uint32_t indexBufferBaseOffset = 0;
VertexBufferTracker vertexBuffers;
StorageBufferLengthTracker storageBufferLengths = {};
BindGroupTracker bindGroups(&storageBufferLengths);
id<MTLRenderCommandEncoder> encoder = commandContext->BeginRender(mtlRenderPass);
auto EncodeRenderBundleCommand = [&](CommandIterator* iter, Command type) {
switch (type) {
case Command::Draw: {
DrawCmd* draw = iter->NextCommand<DrawCmd>();
vertexBuffers.Apply(encoder, lastPipeline);
bindGroups.Apply(encoder);
storageBufferLengths.Apply(encoder, lastPipeline);
// The instance count must be non-zero, otherwise no-op
if (draw->instanceCount != 0) {
// MTLFeatureSet_iOS_GPUFamily3_v1 does not support baseInstance
if (draw->firstInstance == 0) {
[encoder drawPrimitives:lastPipeline->GetMTLPrimitiveTopology()
vertexStart:draw->firstVertex
vertexCount:draw->vertexCount
instanceCount:draw->instanceCount];
} else {
[encoder drawPrimitives:lastPipeline->GetMTLPrimitiveTopology()
vertexStart:draw->firstVertex
vertexCount:draw->vertexCount
instanceCount:draw->instanceCount
baseInstance:draw->firstInstance];
}
}
break;
}
case Command::DrawIndexed: {
DrawIndexedCmd* draw = iter->NextCommand<DrawIndexedCmd>();
size_t formatSize =
IndexFormatSize(lastPipeline->GetVertexStateDescriptor()->indexFormat);
vertexBuffers.Apply(encoder, lastPipeline);
bindGroups.Apply(encoder);
storageBufferLengths.Apply(encoder, lastPipeline);
// The index and instance count must be non-zero, otherwise no-op
if (draw->indexCount != 0 && draw->instanceCount != 0) {
// MTLFeatureSet_iOS_GPUFamily3_v1 does not support baseInstance and
// baseVertex.
if (draw->baseVertex == 0 && draw->firstInstance == 0) {
[encoder drawIndexedPrimitives:lastPipeline->GetMTLPrimitiveTopology()
indexCount:draw->indexCount
indexType:lastPipeline->GetMTLIndexType()
indexBuffer:indexBuffer
indexBufferOffset:indexBufferBaseOffset +
draw->firstIndex * formatSize
instanceCount:draw->instanceCount];
} else {
[encoder drawIndexedPrimitives:lastPipeline->GetMTLPrimitiveTopology()
indexCount:draw->indexCount
indexType:lastPipeline->GetMTLIndexType()
indexBuffer:indexBuffer
indexBufferOffset:indexBufferBaseOffset +
draw->firstIndex * formatSize
instanceCount:draw->instanceCount
baseVertex:draw->baseVertex
baseInstance:draw->firstInstance];
}
}
break;
}
case Command::DrawIndirect: {
DrawIndirectCmd* draw = iter->NextCommand<DrawIndirectCmd>();
vertexBuffers.Apply(encoder, lastPipeline);
bindGroups.Apply(encoder);
storageBufferLengths.Apply(encoder, lastPipeline);
Buffer* buffer = ToBackend(draw->indirectBuffer.Get());
id<MTLBuffer> indirectBuffer = buffer->GetMTLBuffer();
[encoder drawPrimitives:lastPipeline->GetMTLPrimitiveTopology()
indirectBuffer:indirectBuffer
indirectBufferOffset:draw->indirectOffset];
break;
}
case Command::DrawIndexedIndirect: {
DrawIndirectCmd* draw = iter->NextCommand<DrawIndirectCmd>();
vertexBuffers.Apply(encoder, lastPipeline);
bindGroups.Apply(encoder);
storageBufferLengths.Apply(encoder, lastPipeline);
Buffer* buffer = ToBackend(draw->indirectBuffer.Get());
id<MTLBuffer> indirectBuffer = buffer->GetMTLBuffer();
[encoder drawIndexedPrimitives:lastPipeline->GetMTLPrimitiveTopology()
indexType:lastPipeline->GetMTLIndexType()
indexBuffer:indexBuffer
indexBufferOffset:indexBufferBaseOffset
indirectBuffer:indirectBuffer
indirectBufferOffset:draw->indirectOffset];
break;
}
case Command::InsertDebugMarker: {
InsertDebugMarkerCmd* cmd = iter->NextCommand<InsertDebugMarkerCmd>();
char* label = iter->NextData<char>(cmd->length + 1);
NSString* mtlLabel = [[NSString alloc] initWithUTF8String:label];
[encoder insertDebugSignpost:mtlLabel];
[mtlLabel release];
break;
}
case Command::PopDebugGroup: {
iter->NextCommand<PopDebugGroupCmd>();
[encoder popDebugGroup];
break;
}
case Command::PushDebugGroup: {
PushDebugGroupCmd* cmd = iter->NextCommand<PushDebugGroupCmd>();
char* label = iter->NextData<char>(cmd->length + 1);
NSString* mtlLabel = [[NSString alloc] initWithUTF8String:label];
[encoder pushDebugGroup:mtlLabel];
[mtlLabel release];
break;
}
case Command::SetRenderPipeline: {
SetRenderPipelineCmd* cmd = iter->NextCommand<SetRenderPipelineCmd>();
RenderPipeline* newPipeline = ToBackend(cmd->pipeline).Get();
vertexBuffers.OnSetPipeline(lastPipeline, newPipeline);
bindGroups.OnSetPipeline(newPipeline);
[encoder setDepthStencilState:newPipeline->GetMTLDepthStencilState()];
[encoder setFrontFacingWinding:newPipeline->GetMTLFrontFace()];
[encoder setCullMode:newPipeline->GetMTLCullMode()];
newPipeline->Encode(encoder);
lastPipeline = newPipeline;
break;
}
case Command::SetBindGroup: {
SetBindGroupCmd* cmd = iter->NextCommand<SetBindGroupCmd>();
uint32_t* dynamicOffsets = nullptr;
if (cmd->dynamicOffsetCount > 0) {
dynamicOffsets = iter->NextData<uint32_t>(cmd->dynamicOffsetCount);
}
bindGroups.OnSetBindGroup(cmd->index, ToBackend(cmd->group.Get()),
cmd->dynamicOffsetCount, dynamicOffsets);
break;
}
case Command::SetIndexBuffer: {
SetIndexBufferCmd* cmd = iter->NextCommand<SetIndexBufferCmd>();
auto b = ToBackend(cmd->buffer.Get());
indexBuffer = b->GetMTLBuffer();
indexBufferBaseOffset = cmd->offset;
break;
}
case Command::SetVertexBuffer: {
SetVertexBufferCmd* cmd = iter->NextCommand<SetVertexBufferCmd>();
vertexBuffers.OnSetVertexBuffer(cmd->slot, ToBackend(cmd->buffer.Get()),
cmd->offset);
break;
}
default:
UNREACHABLE();
break;
}
};
Command type;
while (mCommands.NextCommandId(&type)) {
switch (type) {
case Command::EndRenderPass: {
mCommands.NextCommand<EndRenderPassCmd>();
commandContext->EndRender();
return;
}
case Command::SetStencilReference: {
SetStencilReferenceCmd* cmd = mCommands.NextCommand<SetStencilReferenceCmd>();
[encoder setStencilReferenceValue:cmd->reference];
break;
}
case Command::SetViewport: {
SetViewportCmd* cmd = mCommands.NextCommand<SetViewportCmd>();
MTLViewport viewport;
viewport.originX = cmd->x;
viewport.originY = cmd->y;
viewport.width = cmd->width;
viewport.height = cmd->height;
viewport.znear = cmd->minDepth;
viewport.zfar = cmd->maxDepth;
[encoder setViewport:viewport];
break;
}
case Command::SetScissorRect: {
SetScissorRectCmd* cmd = mCommands.NextCommand<SetScissorRectCmd>();
MTLScissorRect rect;
rect.x = cmd->x;
rect.y = cmd->y;
rect.width = cmd->width;
rect.height = cmd->height;
// The scissor rect x + width must be <= render pass width
if ((rect.x + rect.width) > width) {
rect.width = width - rect.x;
}
// The scissor rect y + height must be <= render pass height
if ((rect.y + rect.height > height)) {
rect.height = height - rect.y;
}
[encoder setScissorRect:rect];
break;
}
case Command::SetBlendColor: {
SetBlendColorCmd* cmd = mCommands.NextCommand<SetBlendColorCmd>();
[encoder setBlendColorRed:cmd->color.r
green:cmd->color.g
blue:cmd->color.b
alpha:cmd->color.a];
break;
}
case Command::ExecuteBundles: {
ExecuteBundlesCmd* cmd = mCommands.NextCommand<ExecuteBundlesCmd>();
auto bundles = mCommands.NextData<Ref<RenderBundleBase>>(cmd->count);
for (uint32_t i = 0; i < cmd->count; ++i) {
CommandIterator* iter = bundles[i]->GetCommands();
iter->Reset();
while (iter->NextCommandId(&type)) {
EncodeRenderBundleCommand(iter, type);
}
}
break;
}
default: {
EncodeRenderBundleCommand(&mCommands, type);
break;
}
}
}
// EndRenderPass should have been called
UNREACHABLE();
}
}} // namespace dawn_native::metal