// Copyright 2023 The Tint Authors.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#include "src/tint/ir/from_program.h"

#include <iostream>
#include <unordered_map>
#include <utility>

#include "src/tint/ast/alias.h"
#include "src/tint/ast/assignment_statement.h"
#include "src/tint/ast/binary_expression.h"
#include "src/tint/ast/bitcast_expression.h"
#include "src/tint/ast/block_statement.h"
#include "src/tint/ast/bool_literal_expression.h"
#include "src/tint/ast/break_if_statement.h"
#include "src/tint/ast/break_statement.h"
#include "src/tint/ast/call_expression.h"
#include "src/tint/ast/call_statement.h"
#include "src/tint/ast/compound_assignment_statement.h"
#include "src/tint/ast/const.h"
#include "src/tint/ast/const_assert.h"
#include "src/tint/ast/continue_statement.h"
#include "src/tint/ast/discard_statement.h"
#include "src/tint/ast/enable.h"
#include "src/tint/ast/float_literal_expression.h"
#include "src/tint/ast/for_loop_statement.h"
#include "src/tint/ast/function.h"
#include "src/tint/ast/id_attribute.h"
#include "src/tint/ast/identifier.h"
#include "src/tint/ast/identifier_expression.h"
#include "src/tint/ast/if_statement.h"
#include "src/tint/ast/increment_decrement_statement.h"
#include "src/tint/ast/int_literal_expression.h"
#include "src/tint/ast/invariant_attribute.h"
#include "src/tint/ast/let.h"
#include "src/tint/ast/literal_expression.h"
#include "src/tint/ast/loop_statement.h"
#include "src/tint/ast/override.h"
#include "src/tint/ast/phony_expression.h"
#include "src/tint/ast/return_statement.h"
#include "src/tint/ast/statement.h"
#include "src/tint/ast/struct.h"
#include "src/tint/ast/struct_member_align_attribute.h"
#include "src/tint/ast/struct_member_size_attribute.h"
#include "src/tint/ast/switch_statement.h"
#include "src/tint/ast/templated_identifier.h"
#include "src/tint/ast/unary_op_expression.h"
#include "src/tint/ast/var.h"
#include "src/tint/ast/variable_decl_statement.h"
#include "src/tint/ast/while_statement.h"
#include "src/tint/ir/block_param.h"
#include "src/tint/ir/builder.h"
#include "src/tint/ir/function.h"
#include "src/tint/ir/if.h"
#include "src/tint/ir/loop.h"
#include "src/tint/ir/module.h"
#include "src/tint/ir/store.h"
#include "src/tint/ir/switch.h"
#include "src/tint/ir/value.h"
#include "src/tint/program.h"
#include "src/tint/scope_stack.h"
#include "src/tint/sem/builtin.h"
#include "src/tint/sem/call.h"
#include "src/tint/sem/function.h"
#include "src/tint/sem/materialize.h"
#include "src/tint/sem/module.h"
#include "src/tint/sem/switch_statement.h"
#include "src/tint/sem/value_constructor.h"
#include "src/tint/sem/value_conversion.h"
#include "src/tint/sem/value_expression.h"
#include "src/tint/sem/variable.h"
#include "src/tint/switch.h"
#include "src/tint/type/reference.h"
#include "src/tint/type/void.h"
#include "src/tint/utils/defer.h"
#include "src/tint/utils/result.h"
#include "src/tint/utils/scoped_assignment.h"

using namespace tint::number_suffixes;  // NOLINT

namespace tint::ir {

namespace {

using ResultType = utils::Result<Module, diag::List>;

bool IsBranched(const Block* b) {
    return b->branch.target != nullptr;
}

bool IsConnected(const FlowNode* b) {
    // Function is always connected as it's the start.
    if (b->Is<ir::Function>()) {
        return true;
    }

    for (auto* parent : b->inbound_branches) {
        if (IsConnected(parent)) {
            return true;
        }
    }
    // Getting here means all the incoming branches are disconnected.
    return false;
}

/// Impl is the private-implementation of FromProgram().
class Impl {
  public:
    /// Constructor
    /// @param program the program to convert to IR
    explicit Impl(const Program* program) : program_(program) {}

    /// Builds an IR module from the program passed to the constructor.
    /// @return the IR module or an error.
    ResultType Build() { return EmitModule(); }

  private:
    enum class ControlFlags { kNone, kExcludeSwitch };

    // The input Program
    const Program* program_ = nullptr;

    /// The IR module being built
    Module mod;

    /// The IR builder being used by the impl.
    Builder builder_{mod};

    // The clone context used to clone data from #program_
    constant::CloneContext clone_ctx_{
        /* type_ctx */ type::CloneContext{
            /* src */ {&program_->Symbols()},
            /* dst */ {&builder_.ir.symbols, &builder_.ir.types},
        },
        /* dst */ {&builder_.ir.constants},
    };

    /// The stack of flow control blocks.
    utils::Vector<FlowNode*, 8> flow_stack_;

    /// The current flow block for expressions.
    Block* current_flow_block_ = nullptr;

    /// The current function being processed.
    Function* current_function_ = nullptr;

    /// The current stack of scopes being processed.
    ScopeStack<Symbol, Value*> scopes_;

    /// The diagnostic that have been raised.
    diag::List diagnostics_;

    /// Map from ast nodes to flow nodes, used to retrieve the flow node for a given AST node.
    /// Used for testing purposes.
    std::unordered_map<const ast::Node*, const FlowNode*> ast_to_flow_;

    class FlowStackScope {
      public:
        FlowStackScope(Impl* impl, FlowNode* node) : impl_(impl) { impl_->flow_stack_.Push(node); }

        ~FlowStackScope() { impl_->flow_stack_.Pop(); }

      private:
        Impl* impl_;
    };

    void add_error(const Source& s, const std::string& err) {
        diagnostics_.add_error(tint::diag::System::IR, err, s);
    }

    void BranchTo(FlowNode* node, utils::VectorRef<Value*> args = {}) {
        TINT_ASSERT(IR, current_flow_block_);
        TINT_ASSERT(IR, !IsBranched(current_flow_block_));

        builder_.Branch(current_flow_block_, node, args);
        current_flow_block_ = nullptr;
    }

    void BranchToIfNeeded(FlowNode* node) {
        if (!current_flow_block_ || IsBranched(current_flow_block_)) {
            return;
        }
        BranchTo(node);
    }

    FlowNode* FindEnclosingControl(ControlFlags flags) {
        for (auto it = flow_stack_.rbegin(); it != flow_stack_.rend(); ++it) {
            if ((*it)->Is<Loop>()) {
                return *it;
            }
            if (flags == ControlFlags::kExcludeSwitch) {
                continue;
            }
            if ((*it)->Is<Switch>()) {
                return *it;
            }
        }
        return nullptr;
    }

    Symbol CloneSymbol(Symbol sym) const {
        return clone_ctx_.type_ctx.dst.st->Register(sym.Name());
    }

    ResultType EmitModule() {
        auto* sem = program_->Sem().Module();

        for (auto* decl : sem->DependencyOrderedDeclarations()) {
            tint::Switch(
                decl,  //
                [&](const ast::Struct*) {
                    // Will be encoded into the `type::Struct` when used. We will then hoist all
                    // used structs up to module scope when converting IR.
                },
                [&](const ast::Alias*) {
                    // Folded away and doesn't appear in the IR.
                },
                [&](const ast::Variable* var) {
                    // Setup the current flow node to be the root block for the module. The builder
                    // will handle creating it if it doesn't exist already.
                    TINT_SCOPED_ASSIGNMENT(current_flow_block_, builder_.CreateRootBlockIfNeeded());
                    EmitVariable(var);
                },
                [&](const ast::Function* func) { EmitFunction(func); },
                [&](const ast::Enable*) {
                    // TODO(dsinclair): Implement? I think these need to be passed along so further
                    // stages know what is enabled.
                },
                [&](const ast::ConstAssert*) {
                    // Evaluated by the resolver, drop from the IR.
                },
                [&](Default) {
                    add_error(decl->source, "unknown type: " + std::string(decl->TypeInfo().name));
                });
        }

        if (diagnostics_.contains_errors()) {
            return ResultType(std::move(diagnostics_));
        }

        return ResultType{std::move(mod)};
    }

    void EmitFunction(const ast::Function* ast_func) {
        // The flow stack should have been emptied when the previous function finished building.
        TINT_ASSERT(IR, flow_stack_.IsEmpty());

        const auto* sem = program_->Sem().Get(ast_func);

        auto* ir_func = builder_.CreateFunction(CloneSymbol(ast_func->name->symbol),
                                                sem->ReturnType()->Clone(clone_ctx_.type_ctx));
        current_function_ = ir_func;
        builder_.ir.functions.Push(ir_func);

        ast_to_flow_[ast_func] = ir_func;

        if (ast_func->IsEntryPoint()) {
            switch (ast_func->PipelineStage()) {
                case ast::PipelineStage::kVertex:
                    ir_func->pipeline_stage = Function::PipelineStage::kVertex;
                    break;
                case ast::PipelineStage::kFragment:
                    ir_func->pipeline_stage = Function::PipelineStage::kFragment;
                    break;
                case ast::PipelineStage::kCompute: {
                    ir_func->pipeline_stage = Function::PipelineStage::kCompute;

                    auto wg_size = sem->WorkgroupSize();
                    ir_func->workgroup_size = {
                        wg_size[0].value(),
                        wg_size[1].value_or(1),
                        wg_size[2].value_or(1),
                    };
                    break;
                }
                default: {
                    TINT_ICE(IR, diagnostics_) << "Invalid pipeline stage";
                    return;
                }
            }

            for (auto* attr : ast_func->return_type_attributes) {
                tint::Switch(
                    attr,  //
                    [&](const ast::LocationAttribute*) {
                        ir_func->return_attributes.Push(Function::ReturnAttribute::kLocation);
                    },
                    [&](const ast::InvariantAttribute*) {
                        ir_func->return_attributes.Push(Function::ReturnAttribute::kInvariant);
                    },
                    [&](const ast::BuiltinAttribute* b) {
                        if (auto* ident_sem =
                                program_->Sem()
                                    .Get(b)
                                    ->As<sem::BuiltinEnumExpression<builtin::BuiltinValue>>()) {
                            switch (ident_sem->Value()) {
                                case builtin::BuiltinValue::kPosition:
                                    ir_func->return_attributes.Push(
                                        Function::ReturnAttribute::kPosition);
                                    break;
                                case builtin::BuiltinValue::kFragDepth:
                                    ir_func->return_attributes.Push(
                                        Function::ReturnAttribute::kFragDepth);
                                    break;
                                case builtin::BuiltinValue::kSampleMask:
                                    ir_func->return_attributes.Push(
                                        Function::ReturnAttribute::kSampleMask);
                                    break;
                                default:
                                    TINT_ICE(IR, diagnostics_)
                                        << "Unknown builtin value in return attributes "
                                        << ident_sem->Value();
                                    return;
                            }
                        } else {
                            TINT_ICE(IR, diagnostics_) << "Builtin attribute sem invalid";
                            return;
                        }
                    });
            }
        }
        ir_func->return_location = sem->ReturnLocation();

        {
            FlowStackScope scope(this, ir_func);

            current_flow_block_ = ir_func->start_target;
            EmitBlock(ast_func->body);

            // TODO(dsinclair): Store parameters

            // If the branch target has already been set then a `return` was called. Only set in the
            // case where `return` wasn't called.
            BranchToIfNeeded(current_function_->end_target);
        }

        TINT_ASSERT(IR, flow_stack_.IsEmpty());
        current_flow_block_ = nullptr;
        current_function_ = nullptr;
    }

    void EmitStatements(utils::VectorRef<const ast::Statement*> stmts) {
        for (auto* s : stmts) {
            EmitStatement(s);

            // If the current flow block has a branch target then the rest of the statements in this
            // block are dead code. Skip them.
            if (!current_flow_block_ || IsBranched(current_flow_block_)) {
                break;
            }
        }
    }

    void EmitStatement(const ast::Statement* stmt) {
        tint::Switch(
            stmt,  //
            [&](const ast::AssignmentStatement* a) { EmitAssignment(a); },
            [&](const ast::BlockStatement* b) { EmitBlock(b); },
            [&](const ast::BreakStatement* b) { EmitBreak(b); },
            [&](const ast::BreakIfStatement* b) { EmitBreakIf(b); },
            [&](const ast::CallStatement* c) { EmitCall(c); },
            [&](const ast::CompoundAssignmentStatement* c) { EmitCompoundAssignment(c); },
            [&](const ast::ContinueStatement* c) { EmitContinue(c); },
            [&](const ast::DiscardStatement* d) { EmitDiscard(d); },
            [&](const ast::IfStatement* i) { EmitIf(i); },
            [&](const ast::LoopStatement* l) { EmitLoop(l); },
            [&](const ast::ForLoopStatement* l) { EmitForLoop(l); },
            [&](const ast::WhileStatement* l) { EmitWhile(l); },
            [&](const ast::ReturnStatement* r) { EmitReturn(r); },
            [&](const ast::SwitchStatement* s) { EmitSwitch(s); },
            [&](const ast::VariableDeclStatement* v) { EmitVariable(v->variable); },
            [&](const ast::IncrementDecrementStatement* i) { EmitIncrementDecrement(i); },
            [&](const ast::ConstAssert*) {
                // Not emitted
            },
            [&](Default) {
                add_error(stmt->source,
                          "unknown statement type: " + std::string(stmt->TypeInfo().name));
            });
    }

    void EmitAssignment(const ast::AssignmentStatement* stmt) {
        // If assigning to a phony, just generate the RHS and we're done. Note that, because this
        // isn't used, a subsequent transform could remove it due to it being dead code. This could
        // then change the interface for the program (i.e. a global var no longer used). If that
        // happens we have to either fix this to store to a phony value, or make sure we pull the
        // interface before doing the dead code elimination.
        if (stmt->lhs->Is<ast::PhonyExpression>()) {
            (void)EmitExpression(stmt->rhs);
            return;
        }

        auto lhs = EmitExpression(stmt->lhs);
        if (!lhs) {
            return;
        }

        auto rhs = EmitExpression(stmt->rhs);
        if (!rhs) {
            return;
        }
        auto store = builder_.Store(lhs.Get(), rhs.Get());
        current_flow_block_->instructions.Push(store);
    }

    void EmitIncrementDecrement(const ast::IncrementDecrementStatement* stmt) {
        auto lhs = EmitExpression(stmt->lhs);
        if (!lhs) {
            return;
        }

        auto* ty = lhs.Get()->Type();
        auto* rhs = ty->UnwrapRef()->is_signed_integer_scalar() ? builder_.Constant(1_i)
                                                                : builder_.Constant(1_u);

        Binary* inst = nullptr;
        if (stmt->increment) {
            inst = builder_.Add(ty, lhs.Get(), rhs);
        } else {
            inst = builder_.Subtract(ty, lhs.Get(), rhs);
        }
        current_flow_block_->instructions.Push(inst);

        auto store = builder_.Store(lhs.Get(), inst);
        current_flow_block_->instructions.Push(store);
    }

    void EmitCompoundAssignment(const ast::CompoundAssignmentStatement* stmt) {
        auto lhs = EmitExpression(stmt->lhs);
        if (!lhs) {
            return;
        }

        auto rhs = EmitExpression(stmt->rhs);
        if (!rhs) {
            return;
        }
        auto* ty = lhs.Get()->Type();
        Binary* inst = nullptr;
        switch (stmt->op) {
            case ast::BinaryOp::kAnd:
                inst = builder_.And(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kOr:
                inst = builder_.Or(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kXor:
                inst = builder_.Xor(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kShiftLeft:
                inst = builder_.ShiftLeft(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kShiftRight:
                inst = builder_.ShiftRight(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kAdd:
                inst = builder_.Add(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kSubtract:
                inst = builder_.Subtract(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kMultiply:
                inst = builder_.Multiply(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kDivide:
                inst = builder_.Divide(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kModulo:
                inst = builder_.Modulo(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kLessThanEqual:
            case ast::BinaryOp::kGreaterThanEqual:
            case ast::BinaryOp::kGreaterThan:
            case ast::BinaryOp::kLessThan:
            case ast::BinaryOp::kNotEqual:
            case ast::BinaryOp::kEqual:
            case ast::BinaryOp::kLogicalAnd:
            case ast::BinaryOp::kLogicalOr:
                TINT_ICE(IR, diagnostics_) << "invalid compound assignment";
                return;
            case ast::BinaryOp::kNone:
                TINT_ICE(IR, diagnostics_) << "missing binary operand type";
                return;
        }
        current_flow_block_->instructions.Push(inst);

        auto store = builder_.Store(lhs.Get(), inst);
        current_flow_block_->instructions.Push(store);
    }

    void EmitBlock(const ast::BlockStatement* block) {
        scopes_.Push();
        TINT_DEFER(scopes_.Pop());

        // Note, this doesn't need to emit a Block as the current block flow node should be
        // sufficient as the blocks all get flattened. Each flow control node will inject the basic
        // blocks it requires.
        EmitStatements(block->statements);
    }

    void EmitIf(const ast::IfStatement* stmt) {
        // Emit the if condition into the end of the preceding block
        auto reg = EmitExpression(stmt->condition);
        if (!reg) {
            return;
        }
        auto* if_node = builder_.CreateIf(reg.Get());

        BranchTo(if_node);

        ast_to_flow_[stmt] = if_node;

        {
            FlowStackScope scope(this, if_node);

            current_flow_block_ = if_node->true_.target->As<Block>();
            EmitBlock(stmt->body);

            // If the true branch did not execute control flow, then go to the merge target
            BranchToIfNeeded(if_node->merge.target);

            current_flow_block_ = if_node->false_.target->As<Block>();
            if (stmt->else_statement) {
                EmitStatement(stmt->else_statement);
            }

            // If the false branch did not execute control flow, then go to the merge target
            BranchToIfNeeded(if_node->merge.target);
        }
        current_flow_block_ = nullptr;

        // If both branches went somewhere, then they both returned, continued or broke. So, there
        // is no need for the if merge-block and there is nothing to branch to the merge block
        // anyway.
        if (IsConnected(if_node->merge.target)) {
            current_flow_block_ = if_node->merge.target->As<Block>();
        }
    }

    void EmitLoop(const ast::LoopStatement* stmt) {
        auto* loop_node = builder_.CreateLoop();

        BranchTo(loop_node);

        ast_to_flow_[stmt] = loop_node;

        {
            FlowStackScope scope(this, loop_node);

            current_flow_block_ = loop_node->start.target->As<Block>();

            // The loop doesn't use EmitBlock because it needs the scope stack to not get popped
            // until after the continuing block.
            scopes_.Push();
            TINT_DEFER(scopes_.Pop());
            EmitStatements(stmt->body->statements);

            // The current block didn't `break`, `return` or `continue`, go to the continuing block.
            BranchToIfNeeded(loop_node->continuing.target);

            current_flow_block_ = loop_node->continuing.target->As<Block>();
            if (stmt->continuing) {
                EmitBlock(stmt->continuing);
            }

            // Branch back to the start node if the continue target didn't branch out already
            BranchToIfNeeded(loop_node->start.target);
        }

        // The loop merge can get disconnected if the loop returns directly, or the continuing
        // target branches, eventually, to the merge, but nothing branched to the continuing target.
        current_flow_block_ = loop_node->merge.target->As<Block>();
        if (!IsConnected(loop_node->merge.target)) {
            current_flow_block_ = nullptr;
        }
    }

    void EmitWhile(const ast::WhileStatement* stmt) {
        auto* loop_node = builder_.CreateLoop();
        // Continue is always empty, just go back to the start
        TINT_ASSERT(IR, loop_node->continuing.target->Is<Block>());
        builder_.Branch(loop_node->continuing.target->As<Block>(), loop_node->start.target,
                        utils::Empty);

        BranchTo(loop_node);

        ast_to_flow_[stmt] = loop_node;

        {
            FlowStackScope scope(this, loop_node);

            current_flow_block_ = loop_node->start.target->As<Block>();

            // Emit the while condition into the start target of the loop
            auto reg = EmitExpression(stmt->condition);
            if (!reg) {
                return;
            }

            // Create an `if (cond) {} else {break;}` control flow
            auto* if_node = builder_.CreateIf(reg.Get());
            TINT_ASSERT(IR, if_node->true_.target->Is<Block>());
            builder_.Branch(if_node->true_.target->As<Block>(), if_node->merge.target,
                            utils::Empty);

            TINT_ASSERT(IR, if_node->false_.target->Is<Block>());
            builder_.Branch(if_node->false_.target->As<Block>(), loop_node->merge.target,
                            utils::Empty);

            BranchTo(if_node);

            current_flow_block_ = if_node->merge.target->As<Block>();
            EmitBlock(stmt->body);

            BranchToIfNeeded(loop_node->continuing.target);
        }
        // The while loop always has a path to the merge target as the break statement comes before
        // anything inside the loop.
        current_flow_block_ = loop_node->merge.target->As<Block>();
    }

    void EmitForLoop(const ast::ForLoopStatement* stmt) {
        auto* loop_node = builder_.CreateLoop();
        TINT_ASSERT(IR, loop_node->continuing.target->Is<Block>());
        builder_.Branch(loop_node->continuing.target->As<Block>(), loop_node->start.target,
                        utils::Empty);

        // Make sure the initializer ends up in a contained scope
        scopes_.Push();
        TINT_DEFER(scopes_.Pop());

        if (stmt->initializer) {
            // Emit the for initializer before branching to the loop
            EmitStatement(stmt->initializer);
        }

        BranchTo(loop_node);

        ast_to_flow_[stmt] = loop_node;

        {
            FlowStackScope scope(this, loop_node);

            current_flow_block_ = loop_node->start.target->As<Block>();

            if (stmt->condition) {
                // Emit the condition into the target target of the loop
                auto reg = EmitExpression(stmt->condition);
                if (!reg) {
                    return;
                }

                // Create an `if (cond) {} else {break;}` control flow
                auto* if_node = builder_.CreateIf(reg.Get());
                TINT_ASSERT(IR, if_node->true_.target->Is<Block>());
                builder_.Branch(if_node->true_.target->As<Block>(), if_node->merge.target,
                                utils::Empty);

                TINT_ASSERT(IR, if_node->false_.target->Is<Block>());
                builder_.Branch(if_node->false_.target->As<Block>(), loop_node->merge.target,
                                utils::Empty);

                BranchTo(if_node);
                current_flow_block_ = if_node->merge.target->As<Block>();
            }

            EmitBlock(stmt->body);
            BranchToIfNeeded(loop_node->continuing.target);

            if (stmt->continuing) {
                current_flow_block_ = loop_node->continuing.target->As<Block>();
                EmitStatement(stmt->continuing);
            }
        }

        // The while loop always has a path to the merge target as the break statement comes before
        // anything inside the loop.
        current_flow_block_ = loop_node->merge.target->As<Block>();
    }

    void EmitSwitch(const ast::SwitchStatement* stmt) {
        // Emit the condition into the preceding block
        auto reg = EmitExpression(stmt->condition);
        if (!reg) {
            return;
        }
        auto* switch_node = builder_.CreateSwitch(reg.Get());

        BranchTo(switch_node);

        ast_to_flow_[stmt] = switch_node;

        {
            FlowStackScope scope(this, switch_node);

            const auto* sem = program_->Sem().Get(stmt);
            for (const auto* c : sem->Cases()) {
                utils::Vector<Switch::CaseSelector, 4> selectors;
                for (const auto* selector : c->Selectors()) {
                    if (selector->IsDefault()) {
                        selectors.Push({nullptr});
                    } else {
                        selectors.Push({builder_.Constant(selector->Value()->Clone(clone_ctx_))});
                    }
                }

                current_flow_block_ = builder_.CreateCase(switch_node, selectors);
                EmitBlock(c->Body()->Declaration());

                BranchToIfNeeded(switch_node->merge.target);
            }
        }
        current_flow_block_ = nullptr;

        if (IsConnected(switch_node->merge.target)) {
            current_flow_block_ = switch_node->merge.target->As<Block>();
        }
    }

    void EmitReturn(const ast::ReturnStatement* stmt) {
        utils::Vector<Value*, 1> ret_value;
        if (stmt->value) {
            auto ret = EmitExpression(stmt->value);
            if (!ret) {
                return;
            }
            ret_value.Push(ret.Get());
        }

        BranchTo(current_function_->end_target, std::move(ret_value));
    }

    void EmitBreak(const ast::BreakStatement*) {
        auto* current_control = FindEnclosingControl(ControlFlags::kNone);
        TINT_ASSERT(IR, current_control);

        if (auto* c = current_control->As<Loop>()) {
            BranchTo(c->merge.target);
        } else if (auto* s = current_control->As<Switch>()) {
            BranchTo(s->merge.target);
        } else {
            TINT_UNREACHABLE(IR, diagnostics_);
        }
    }

    void EmitContinue(const ast::ContinueStatement*) {
        auto* current_control = FindEnclosingControl(ControlFlags::kExcludeSwitch);
        TINT_ASSERT(IR, current_control);

        if (auto* c = current_control->As<Loop>()) {
            BranchTo(c->continuing.target);
        } else {
            TINT_UNREACHABLE(IR, diagnostics_);
        }
    }

    // Discard is being treated as an instruction. The semantics in WGSL is demote_to_helper, so the
    // code has to continue as before it just predicates writes. If WGSL grows some kind of
    // terminating discard that would probably make sense as a FlowNode but would then require
    // figuring out the multi-level exit that is triggered.
    void EmitDiscard(const ast::DiscardStatement*) {
        auto* inst = builder_.Discard();
        current_flow_block_->instructions.Push(inst);
    }

    void EmitBreakIf(const ast::BreakIfStatement* stmt) {
        // Emit the break-if condition into the end of the preceding block
        auto reg = EmitExpression(stmt->condition);
        if (!reg) {
            return;
        }
        auto* if_node = builder_.CreateIf(reg.Get());

        BranchTo(if_node);

        ast_to_flow_[stmt] = if_node;

        auto* current_control = FindEnclosingControl(ControlFlags::kExcludeSwitch);
        TINT_ASSERT(IR, current_control);
        TINT_ASSERT(IR, current_control->Is<Loop>());

        auto* loop = current_control->As<Loop>();

        current_flow_block_ = if_node->true_.target->As<Block>();
        BranchTo(loop->merge.target);

        current_flow_block_ = if_node->false_.target->As<Block>();
        BranchTo(if_node->merge.target);

        current_flow_block_ = if_node->merge.target->As<Block>();

        // The `break-if` has to be the last item in the continuing block. The false branch of the
        // `break-if` will always take us back to the start of the loop.
        BranchTo(loop->start.target);
    }

    utils::Result<Value*> EmitExpression(const ast::Expression* expr) {
        // If this is a value that has been const-eval'd return the result.
        if (auto* sem = program_->Sem().Get(expr)->As<sem::ValueExpression>()) {
            if (auto* v = sem->ConstantValue()) {
                if (auto* cv = v->Clone(clone_ctx_)) {
                    return builder_.Constant(cv);
                }
            }
        }

        return tint::Switch(
            expr,
            // [&](const ast::IndexAccessorExpression* a) {
            // TODO(dsinclair): Implement
            // },
            [&](const ast::BinaryExpression* b) { return EmitBinary(b); },
            [&](const ast::BitcastExpression* b) { return EmitBitcast(b); },
            [&](const ast::CallExpression* c) { return EmitCall(c); },
            [&](const ast::IdentifierExpression* i) -> utils::Result<Value*> {
                auto* v = scopes_.Get(i->identifier->symbol);
                if (TINT_UNLIKELY(!v)) {
                    add_error(expr->source,
                              "unable to find identifier " + i->identifier->symbol.Name());
                    return utils::Failure;
                }
                return {v};
            },
            [&](const ast::LiteralExpression* l) { return EmitLiteral(l); },
            // [&](const ast::MemberAccessorExpression* m) {
            // TODO(dsinclair): Implement
            // },
            [&](const ast::UnaryOpExpression* u) { return EmitUnary(u); },
            // Note, ast::PhonyExpression is explicitly not handled here as it should never get into
            // this method. The assignment statement should have filtered it out already.
            [&](Default) {
                add_error(expr->source,
                          "unknown expression type: " + std::string(expr->TypeInfo().name));
                return utils::Failure;
            });
    }

    void EmitVariable(const ast::Variable* var) {
        auto* sem = program_->Sem().Get(var);

        return tint::Switch(  //
            var,
            [&](const ast::Var* v) {
                auto* ty = sem->Type()->Clone(clone_ctx_.type_ctx);
                auto* val = builder_.Declare(ty);
                current_flow_block_->instructions.Push(val);

                if (v->initializer) {
                    auto init = EmitExpression(v->initializer);
                    if (!init) {
                        return;
                    }
                    val->initializer = init.Get();
                }
                // Store the declaration so we can get the instruction to store too
                scopes_.Set(v->name->symbol, val);

                // Record the original name of the var
                builder_.ir.SetName(val, v->name->symbol.Name());
            },
            [&](const ast::Let* l) {
                // A `let` doesn't exist as a standalone item in the IR, it's just the result of the
                // initializer.
                auto init = EmitExpression(l->initializer);
                if (!init) {
                    return;
                }

                // Store the results of the initialization
                scopes_.Set(l->name->symbol, init.Get());

                // Record the original name of the let
                builder_.ir.SetName(init.Get(), l->name->symbol.Name());
            },
            [&](const ast::Override*) {
                add_error(var->source,
                          "found an `Override` variable. The SubstituteOverrides "
                          "transform must be run before converting to IR");
            },
            [&](const ast::Const*) {
                // Skip. This should be handled by const-eval already, so the const will be a
                // `constant::` value at the usage sites. Can just ignore the `const` variable as it
                // should never be used.
                //
                // TODO(dsinclair): Probably want to store the const variable somewhere and then in
                // identifier expression log an error if we ever see a const identifier. Add this
                // when identifiers and variables are supported.
            },
            [&](Default) {
                add_error(var->source, "unknown variable: " + std::string(var->TypeInfo().name));
            });
    }

    utils::Result<Value*> EmitUnary(const ast::UnaryOpExpression* expr) {
        auto val = EmitExpression(expr->expr);
        if (!val) {
            return utils::Failure;
        }

        auto* sem = program_->Sem().Get(expr);
        auto* ty = sem->Type()->Clone(clone_ctx_.type_ctx);

        Instruction* inst = nullptr;
        switch (expr->op) {
            case ast::UnaryOp::kAddressOf:
                inst = builder_.AddressOf(ty, val.Get());
                break;
            case ast::UnaryOp::kComplement:
                inst = builder_.Complement(ty, val.Get());
                break;
            case ast::UnaryOp::kIndirection:
                inst = builder_.Indirection(ty, val.Get());
                break;
            case ast::UnaryOp::kNegation:
                inst = builder_.Negation(ty, val.Get());
                break;
            case ast::UnaryOp::kNot:
                inst = builder_.Not(ty, val.Get());
                break;
        }

        current_flow_block_->instructions.Push(inst);
        return inst;
    }

    // A short-circut needs special treatment. The short-circuit is decomposed into the relevant if
    // statements and declarations.
    utils::Result<Value*> EmitShortCircuit(const ast::BinaryExpression* expr) {
        switch (expr->op) {
            case ast::BinaryOp::kLogicalAnd:
            case ast::BinaryOp::kLogicalOr:
                break;
            default:
                TINT_ICE(IR, diagnostics_)
                    << "invalid operation type for short-circut decomposition";
                return utils::Failure;
        }

        // Evaluate the LHS of the short-circuit
        auto lhs = EmitExpression(expr->lhs);
        if (!lhs) {
            return utils::Failure;
        }

        auto* if_node = builder_.CreateIf(lhs.Get());
        BranchTo(if_node);

        auto* result = builder_.BlockParam(builder_.ir.types.Get<type::Bool>());
        if_node->merge.target->As<Block>()->params.Push(result);

        utils::Result<Value*> rhs;
        {
            FlowStackScope scope(this, if_node);

            utils::Vector<Value*, 1> alt_args;
            alt_args.Push(lhs.Get());

            // If this is an `&&` then we only evaluate the RHS expression in the true block.
            // If this is an `||` then we only evaluate the RHS expression in the false block.
            if (expr->op == ast::BinaryOp::kLogicalAnd) {
                // If the lhs is false, then that is the result we want to pass to the merge block
                // as our argument
                current_flow_block_ = if_node->false_.target->As<Block>();
                BranchTo(if_node->merge.target, std::move(alt_args));

                current_flow_block_ = if_node->true_.target->As<Block>();
            } else {
                // If the lhs is true, then that is the result we want to pass to the merge block
                // as our argument
                current_flow_block_ = if_node->true_.target->As<Block>();
                BranchTo(if_node->merge.target, std::move(alt_args));

                current_flow_block_ = if_node->false_.target->As<Block>();
            }

            rhs = EmitExpression(expr->rhs);
            if (!rhs) {
                return utils::Failure;
            }
            utils::Vector<Value*, 1> args;
            args.Push(rhs.Get());

            BranchTo(if_node->merge.target, std::move(args));
        }
        current_flow_block_ = if_node->merge.target->As<Block>();

        return result;
    }

    utils::Result<Value*> EmitBinary(const ast::BinaryExpression* expr) {
        if (expr->op == ast::BinaryOp::kLogicalAnd || expr->op == ast::BinaryOp::kLogicalOr) {
            return EmitShortCircuit(expr);
        }

        auto lhs = EmitExpression(expr->lhs);
        if (!lhs) {
            return utils::Failure;
        }

        auto rhs = EmitExpression(expr->rhs);
        if (!rhs) {
            return utils::Failure;
        }

        auto* sem = program_->Sem().Get(expr);
        auto* ty = sem->Type()->Clone(clone_ctx_.type_ctx);

        Binary* inst = nullptr;
        switch (expr->op) {
            case ast::BinaryOp::kAnd:
                inst = builder_.And(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kOr:
                inst = builder_.Or(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kXor:
                inst = builder_.Xor(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kEqual:
                inst = builder_.Equal(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kNotEqual:
                inst = builder_.NotEqual(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kLessThan:
                inst = builder_.LessThan(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kGreaterThan:
                inst = builder_.GreaterThan(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kLessThanEqual:
                inst = builder_.LessThanEqual(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kGreaterThanEqual:
                inst = builder_.GreaterThanEqual(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kShiftLeft:
                inst = builder_.ShiftLeft(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kShiftRight:
                inst = builder_.ShiftRight(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kAdd:
                inst = builder_.Add(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kSubtract:
                inst = builder_.Subtract(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kMultiply:
                inst = builder_.Multiply(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kDivide:
                inst = builder_.Divide(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kModulo:
                inst = builder_.Modulo(ty, lhs.Get(), rhs.Get());
                break;
            case ast::BinaryOp::kLogicalAnd:
            case ast::BinaryOp::kLogicalOr:
                TINT_ICE(IR, diagnostics_) << "short circuit op should have already been handled";
                return utils::Failure;
            case ast::BinaryOp::kNone:
                TINT_ICE(IR, diagnostics_) << "missing binary operand type";
                return utils::Failure;
        }

        current_flow_block_->instructions.Push(inst);
        return inst;
    }

    utils::Result<Value*> EmitBitcast(const ast::BitcastExpression* expr) {
        auto val = EmitExpression(expr->expr);
        if (!val) {
            return utils::Failure;
        }

        auto* sem = program_->Sem().Get(expr);
        auto* ty = sem->Type()->Clone(clone_ctx_.type_ctx);
        auto* inst = builder_.Bitcast(ty, val.Get());

        current_flow_block_->instructions.Push(inst);
        return inst;
    }

    void EmitCall(const ast::CallStatement* stmt) { (void)EmitCall(stmt->expr); }

    utils::Result<Value*> EmitCall(const ast::CallExpression* expr) {
        // If this is a materialized semantic node, just use the constant value.
        if (auto* mat = program_->Sem().Get(expr)) {
            if (mat->ConstantValue()) {
                auto* cv = mat->ConstantValue()->Clone(clone_ctx_);
                if (!cv) {
                    add_error(expr->source, "failed to get constant value for call " +
                                                std::string(expr->TypeInfo().name));
                    return utils::Failure;
                }
                return builder_.Constant(cv);
            }
        }

        utils::Vector<Value*, 8> args;
        args.Reserve(expr->args.Length());

        // Emit the arguments
        for (const auto* arg : expr->args) {
            auto value = EmitExpression(arg);
            if (!value) {
                add_error(arg->source, "failed to convert arguments");
                return utils::Failure;
            }
            args.Push(value.Get());
        }

        auto* sem = program_->Sem().Get<sem::Call>(expr);
        if (!sem) {
            add_error(expr->source, "failed to get semantic information for call " +
                                        std::string(expr->TypeInfo().name));
            return utils::Failure;
        }

        auto* ty = sem->Target()->ReturnType()->Clone(clone_ctx_.type_ctx);

        Instruction* inst = nullptr;

        // If this is a builtin function, emit the specific builtin value
        if (auto* b = sem->Target()->As<sem::Builtin>()) {
            inst = builder_.Builtin(ty, b->Type(), args);
        } else if (sem->Target()->As<sem::ValueConstructor>()) {
            inst = builder_.Construct(ty, std::move(args));
        } else if (auto* conv = sem->Target()->As<sem::ValueConversion>()) {
            auto* from = conv->Source()->Clone(clone_ctx_.type_ctx);
            inst = builder_.Convert(ty, from, std::move(args));
        } else if (expr->target->identifier->Is<ast::TemplatedIdentifier>()) {
            TINT_UNIMPLEMENTED(IR, diagnostics_) << "missing templated ident support";
            return utils::Failure;
        } else {
            // Not a builtin and not a templated call, so this is a user function.
            auto name = CloneSymbol(expr->target->identifier->symbol);
            inst = builder_.UserCall(ty, name, std::move(args));
        }
        if (inst == nullptr) {
            return utils::Failure;
        }
        current_flow_block_->instructions.Push(inst);
        return inst;
    }

    utils::Result<Value*> EmitLiteral(const ast::LiteralExpression* lit) {
        auto* sem = program_->Sem().Get(lit);
        if (!sem) {
            add_error(lit->source, "failed to get semantic information for node " +
                                       std::string(lit->TypeInfo().name));
            return utils::Failure;
        }

        auto* cv = sem->ConstantValue()->Clone(clone_ctx_);
        if (!cv) {
            add_error(lit->source,
                      "failed to get constant value for node " + std::string(lit->TypeInfo().name));
            return utils::Failure;
        }
        return builder_.Constant(cv);
    }

    //    void EmitAttributes(utils::VectorRef<const ast::Attribute*> attrs) {
    //        for (auto* attr : attrs) {
    //            EmitAttribute(attr);
    //        }
    //    }
    //
    //    void EmitAttribute(const ast::Attribute* attr) {
    //        tint::Switch(  //
    //            attr,
    //            [&](const ast::WorkgroupAttribute* wg) {
    //              // TODO(dsinclair): Implement
    //            },
    //            [&](const ast::StageAttribute* s) {
    //              // TODO(dsinclair): Implement
    //            },
    //            [&](const ast::BindingAttribute* b) {
    //              // TODO(dsinclair): Implement
    //            },
    //            [&](const ast::GroupAttribute* g) {
    //              // TODO(dsinclair): Implement
    //            },
    //            [&](const ast::LocationAttribute* l) {
    //              // TODO(dsinclair): Implement
    //            },
    //            [&](const ast::BuiltinAttribute* b) {
    //              // TODO(dsinclair): Implement
    //            },
    //            [&](const ast::InterpolateAttribute* i) {
    //              // TODO(dsinclair): Implement
    //            },
    //            [&](const ast::InvariantAttribute* i) {
    //              // TODO(dsinclair): Implement
    //            },
    //            [&](const ast::MustUseAttribute* i) {
    //              // TODO(dsinclair): Implement
    //            },
    //            [&](const ast::IdAttribute*) {
    //                add_error(attr->source,
    //                          "found an `Id` attribute. The SubstituteOverrides transform "
    //                          "must be run before converting to IR");
    //            },
    //            [&](const ast::StructMemberSizeAttribute*) {
    //                TINT_ICE(IR, diagnostics_)
    //                    << "StructMemberSizeAttribute encountered during IR conversion";
    //            },
    //            [&](const ast::StructMemberAlignAttribute*) {
    //                TINT_ICE(IR, diagnostics_)
    //                    << "StructMemberAlignAttribute encountered during IR conversion";
    //            },
    //            [&](const ast::StrideAttribute* s) {
    //              // TODO(dsinclair): Implement
    //            },
    //            [&](const ast::InternalAttribute *i) {
    //              // TODO(dsinclair): Implement
    //            },
    //            [&](Default) {
    //                add_error(attr->source, "unknown attribute: " +
    //                std::string(attr->TypeInfo().name));
    //            });
    //    }
};

}  // namespace

utils::Result<Module, std::string> FromProgram(const Program* program) {
    if (!program->IsValid()) {
        return std::string("input program is not valid");
    }

    Impl b(program);
    auto r = b.Build();
    if (!r) {
        return r.Failure().str();
    }

    return r.Move();
}

}  // namespace tint::ir