| // Copyright 2020 The Dawn & Tint Authors |
| // |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are met: |
| // |
| // 1. Redistributions of source code must retain the above copyright notice, this |
| // list of conditions and the following disclaimer. |
| // |
| // 2. Redistributions in binary form must reproduce the above copyright notice, |
| // this list of conditions and the following disclaimer in the documentation |
| // and/or other materials provided with the distribution. |
| // |
| // 3. Neither the name of the copyright holder nor the names of its |
| // contributors may be used to endorse or promote products derived from |
| // this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| // DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| // FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| // DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| // CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| // OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| #include <vector> |
| |
| #include "dawn/common/Math.h" |
| #include "dawn/tests/DawnTest.h" |
| #include "dawn/utils/TestUtils.h" |
| #include "dawn/utils/TextureUtils.h" |
| #include "dawn/utils/WGPUHelpers.h" |
| |
| namespace dawn { |
| namespace { |
| |
| class QueueTests : public DawnTest {}; |
| |
| // Test that GetQueue always returns the same object. |
| TEST_P(QueueTests, GetQueueSameObject) { |
| wgpu::Queue q1 = device.GetQueue(); |
| wgpu::Queue q2 = device.GetQueue(); |
| EXPECT_EQ(q1.Get(), q2.Get()); |
| } |
| |
| DAWN_INSTANTIATE_TEST(QueueTests, |
| D3D11Backend(), |
| D3D12Backend(), |
| MetalBackend(), |
| NullBackend(), |
| OpenGLBackend(), |
| OpenGLESBackend(), |
| VulkanBackend()); |
| |
| class QueueWriteBufferTests : public DawnTest {}; |
| |
| // Test the simplest WriteBuffer setting one u32 at offset 0. |
| TEST_P(QueueWriteBufferTests, SmallDataAtZero) { |
| wgpu::BufferDescriptor descriptor; |
| descriptor.size = 4; |
| descriptor.usage = wgpu::BufferUsage::CopySrc | wgpu::BufferUsage::CopyDst; |
| wgpu::Buffer buffer = device.CreateBuffer(&descriptor); |
| |
| uint32_t value = 0x01020304; |
| queue.WriteBuffer(buffer, 0, &value, sizeof(value)); |
| |
| EXPECT_BUFFER_U32_EQ(value, buffer, 0); |
| } |
| |
| // Test an empty WriteBuffer |
| TEST_P(QueueWriteBufferTests, ZeroSized) { |
| wgpu::BufferDescriptor descriptor; |
| descriptor.size = 4; |
| descriptor.usage = wgpu::BufferUsage::CopySrc | wgpu::BufferUsage::CopyDst; |
| wgpu::Buffer buffer = device.CreateBuffer(&descriptor); |
| |
| uint32_t initialValue = 0x42; |
| queue.WriteBuffer(buffer, 0, &initialValue, sizeof(initialValue)); |
| |
| queue.WriteBuffer(buffer, 0, nullptr, 0); |
| |
| // The content of the buffer isn't changed |
| EXPECT_BUFFER_U32_EQ(initialValue, buffer, 0); |
| } |
| |
| // Call WriteBuffer at offset 0 via a u32 twice. Test that data is updated accoordingly. |
| TEST_P(QueueWriteBufferTests, SetTwice) { |
| wgpu::BufferDescriptor descriptor; |
| descriptor.size = 4; |
| descriptor.usage = wgpu::BufferUsage::CopySrc | wgpu::BufferUsage::CopyDst; |
| wgpu::Buffer buffer = device.CreateBuffer(&descriptor); |
| |
| uint32_t value = 0x01020304; |
| queue.WriteBuffer(buffer, 0, &value, sizeof(value)); |
| |
| EXPECT_BUFFER_U32_EQ(value, buffer, 0); |
| |
| value = 0x05060708; |
| queue.WriteBuffer(buffer, 0, &value, sizeof(value)); |
| |
| EXPECT_BUFFER_U32_EQ(value, buffer, 0); |
| } |
| |
| // Test that WriteBuffer offset works. |
| TEST_P(QueueWriteBufferTests, SmallDataAtOffset) { |
| wgpu::BufferDescriptor descriptor; |
| descriptor.size = 4000; |
| descriptor.usage = wgpu::BufferUsage::CopySrc | wgpu::BufferUsage::CopyDst; |
| wgpu::Buffer buffer = device.CreateBuffer(&descriptor); |
| |
| constexpr uint64_t kOffset = 2000; |
| uint32_t value = 0x01020304; |
| queue.WriteBuffer(buffer, kOffset, &value, sizeof(value)); |
| |
| EXPECT_BUFFER_U32_EQ(value, buffer, kOffset); |
| } |
| |
| // Stress test for many calls to WriteBuffer |
| TEST_P(QueueWriteBufferTests, ManyWriteBuffer) { |
| // Note: Increasing the size of the buffer will likely cause timeout issues. |
| // In D3D12, timeout detection occurs when the GPU scheduler tries but cannot preempt the task |
| // executing these commands in-flight. If this takes longer than ~2s, a device reset occurs and |
| // fails the test. Since GPUs may or may not complete by then, this test must be disabled OR |
| // modified to be well-below the timeout limit. |
| |
| // TODO(crbug.com/dawn/228): Re-enable once the issue with Metal on 10.14.6 is fixed. |
| DAWN_SUPPRESS_TEST_IF(IsMacOS() && IsIntel() && IsMetal()); |
| |
| // The Vulkan Validation Layers' memory barrier validation keeps track of every range written |
| // to independently which causes validation of each WriteBuffer to take increasing time, and |
| // this test to take forever. Skip it when VVLs are enabled. |
| DAWN_SUPPRESS_TEST_IF(IsVulkan() && IsBackendValidationEnabled()); |
| |
| constexpr uint64_t kSize = 4000 * 1000; |
| constexpr uint32_t kElements = 250 * 250; |
| wgpu::BufferDescriptor descriptor; |
| descriptor.size = kSize; |
| descriptor.usage = wgpu::BufferUsage::CopySrc | wgpu::BufferUsage::CopyDst; |
| wgpu::Buffer buffer = device.CreateBuffer(&descriptor); |
| |
| std::vector<uint32_t> expectedData; |
| for (uint32_t i = 0; i < kElements; ++i) { |
| queue.WriteBuffer(buffer, i * sizeof(uint32_t), &i, sizeof(i)); |
| expectedData.push_back(i); |
| } |
| |
| EXPECT_BUFFER_U32_RANGE_EQ(expectedData.data(), buffer, 0, kElements); |
| } |
| |
| // Test using WriteBuffer for lots of data |
| TEST_P(QueueWriteBufferTests, LargeWriteBuffer) { |
| constexpr uint64_t kSize = 4000 * 1000; |
| constexpr uint32_t kElements = 1000 * 1000; |
| wgpu::BufferDescriptor descriptor; |
| descriptor.size = kSize; |
| descriptor.usage = wgpu::BufferUsage::CopySrc | wgpu::BufferUsage::CopyDst; |
| wgpu::Buffer buffer = device.CreateBuffer(&descriptor); |
| |
| std::vector<uint32_t> expectedData; |
| for (uint32_t i = 0; i < kElements; ++i) { |
| expectedData.push_back(i); |
| } |
| |
| queue.WriteBuffer(buffer, 0, expectedData.data(), kElements * sizeof(uint32_t)); |
| |
| EXPECT_BUFFER_U32_RANGE_EQ(expectedData.data(), buffer, 0, kElements); |
| } |
| |
| // Test using WriteBuffer for super large data block |
| TEST_P(QueueWriteBufferTests, SuperLargeWriteBuffer) { |
| constexpr uint64_t kSize = 12000 * 1000; |
| constexpr uint64_t kElements = 3000 * 1000; |
| wgpu::BufferDescriptor descriptor; |
| descriptor.size = kSize; |
| descriptor.usage = wgpu::BufferUsage::CopySrc | wgpu::BufferUsage::CopyDst; |
| wgpu::Buffer buffer = device.CreateBuffer(&descriptor); |
| |
| std::vector<uint32_t> expectedData; |
| for (uint32_t i = 0; i < kElements; ++i) { |
| expectedData.push_back(i); |
| } |
| |
| queue.WriteBuffer(buffer, 0, expectedData.data(), kElements * sizeof(uint32_t)); |
| |
| EXPECT_BUFFER_U32_RANGE_EQ(expectedData.data(), buffer, 0, kElements); |
| } |
| |
| // Test using the max buffer size. Regression test for dawn:1985. We don't bother validating the |
| // results for this case since that would take a lot longer, just that there are no errors. |
| TEST_P(QueueWriteBufferTests, MaxBufferSizeWriteBuffer) { |
| uint32_t maxBufferSize = GetSupportedLimits().limits.maxBufferSize; |
| wgpu::BufferDescriptor descriptor; |
| descriptor.size = maxBufferSize; |
| descriptor.usage = wgpu::BufferUsage::CopySrc | wgpu::BufferUsage::CopyDst; |
| wgpu::Buffer buffer = device.CreateBuffer(&descriptor); |
| |
| std::vector<uint8_t> data(maxBufferSize); |
| queue.WriteBuffer(buffer, 0, data.data(), maxBufferSize); |
| } |
| |
| // Test a special code path: writing when dynamic uploader already contatins some unaligned |
| // data, it might be necessary to use a ring buffer with properly aligned offset. |
| TEST_P(QueueWriteBufferTests, UnalignedDynamicUploader) { |
| utils::UnalignDynamicUploader(device); |
| |
| wgpu::BufferDescriptor descriptor; |
| descriptor.size = 4; |
| descriptor.usage = wgpu::BufferUsage::CopySrc | wgpu::BufferUsage::CopyDst; |
| wgpu::Buffer buffer = device.CreateBuffer(&descriptor); |
| |
| uint32_t value = 0x01020304; |
| queue.WriteBuffer(buffer, 0, &value, sizeof(value)); |
| |
| EXPECT_BUFFER_U32_EQ(value, buffer, 0); |
| } |
| |
| DAWN_INSTANTIATE_TEST(QueueWriteBufferTests, |
| D3D11Backend(), |
| D3D12Backend(), |
| MetalBackend(), |
| OpenGLBackend(), |
| OpenGLESBackend(), |
| VulkanBackend()); |
| |
| // For MinimumDataSpec bytesPerRow and rowsPerImage, compute a default from the copy extent. |
| constexpr uint32_t kStrideComputeDefault = 0xFFFF'FFFEul; |
| |
| namespace { |
| using TextureFormat = wgpu::TextureFormat; |
| DAWN_TEST_PARAM_STRUCT(WriteTextureFormatParams, TextureFormat); |
| |
| struct TextureSpec { |
| wgpu::Origin3D copyOrigin; |
| wgpu::Extent3D textureSize; |
| uint32_t level; |
| }; |
| |
| struct DataSpec { |
| uint64_t size; |
| uint64_t offset; |
| uint32_t bytesPerRow; |
| uint32_t rowsPerImage; |
| }; |
| |
| void PackTextureData(const uint8_t* srcData, |
| uint32_t width, |
| uint32_t height, |
| uint32_t srcBytesPerRow, |
| uint8_t* dstData, |
| uint32_t dstBytesPerRow, |
| uint32_t bytesPerTexel) { |
| for (uint64_t y = 0; y < height; ++y) { |
| for (uint64_t x = 0; x < width; ++x) { |
| uint64_t src = x * bytesPerTexel + y * srcBytesPerRow; |
| uint64_t dst = x * bytesPerTexel + y * dstBytesPerRow; |
| |
| for (uint64_t i = 0; i < bytesPerTexel; i++) { |
| dstData[dst + i] = srcData[src + i]; |
| } |
| } |
| } |
| } |
| |
| void FillData(uint8_t* data, size_t count) { |
| for (size_t i = 0; i < count; ++i) { |
| data[i] = static_cast<uint8_t>(i % 253); |
| } |
| } |
| } // namespace |
| |
| class QueueWriteTextureTests : public DawnTestWithParams<WriteTextureFormatParams> { |
| protected: |
| void SetUp() override { |
| DawnTestWithParams::SetUp(); |
| // TODO(crbug.com/dawn/2391): Stencil format is failing on ANGLE + SwiftShader, needs |
| // investigation. |
| DAWN_SUPPRESS_TEST_IF(IsANGLESwiftShader() && |
| utils::IsDepthOrStencilFormat(GetParam().mTextureFormat)); |
| } |
| |
| static DataSpec MinimumDataSpec(wgpu::Extent3D writeSize, |
| uint32_t overrideBytesPerRow = kStrideComputeDefault, |
| uint32_t overrideRowsPerImage = kStrideComputeDefault) { |
| uint32_t bytesPerRow = |
| writeSize.width * utils::GetTexelBlockSizeInBytes(GetParam().mTextureFormat); |
| if (overrideBytesPerRow != kStrideComputeDefault) { |
| bytesPerRow = overrideBytesPerRow; |
| } |
| uint32_t rowsPerImage = writeSize.height; |
| if (overrideRowsPerImage != kStrideComputeDefault) { |
| rowsPerImage = overrideRowsPerImage; |
| } |
| |
| uint32_t totalDataSize = utils::RequiredBytesInCopy(bytesPerRow, rowsPerImage, writeSize, |
| GetParam().mTextureFormat); |
| return {totalDataSize, 0, bytesPerRow, rowsPerImage}; |
| } |
| |
| void DoTest(const TextureSpec& textureSpec, |
| const DataSpec& dataSpec, |
| const wgpu::Extent3D& copySize) { |
| // Create data of size `size` and populate it |
| std::vector<uint8_t> data(dataSpec.size); |
| FillData(data.data(), data.size()); |
| |
| // Create a texture that is `width` x `height` with (`level` + 1) mip levels. |
| wgpu::TextureDescriptor descriptor = {}; |
| descriptor.dimension = wgpu::TextureDimension::e2D; |
| descriptor.size = textureSpec.textureSize; |
| descriptor.format = GetParam().mTextureFormat; |
| descriptor.mipLevelCount = textureSpec.level + 1; |
| descriptor.usage = wgpu::TextureUsage::CopyDst | wgpu::TextureUsage::CopySrc; |
| wgpu::Texture texture = device.CreateTexture(&descriptor); |
| |
| wgpu::TextureDataLayout textureDataLayout = utils::CreateTextureDataLayout( |
| dataSpec.offset, dataSpec.bytesPerRow, dataSpec.rowsPerImage); |
| |
| wgpu::ImageCopyTexture imageCopyTexture = |
| utils::CreateImageCopyTexture(texture, textureSpec.level, textureSpec.copyOrigin); |
| |
| queue.WriteTexture(&imageCopyTexture, data.data(), dataSpec.size, &textureDataLayout, |
| ©Size); |
| |
| const uint32_t bytesPerTexel = utils::GetTexelBlockSizeInBytes(GetParam().mTextureFormat); |
| wgpu::Extent3D mipSize = {textureSpec.textureSize.width >> textureSpec.level, |
| textureSpec.textureSize.height >> textureSpec.level, |
| textureSpec.textureSize.depthOrArrayLayers}; |
| uint32_t bytesPerRow = dataSpec.bytesPerRow; |
| if (bytesPerRow == wgpu::kCopyStrideUndefined) { |
| bytesPerRow = mipSize.width * bytesPerTexel; |
| } |
| uint32_t alignedBytesPerRow = Align(bytesPerRow, bytesPerTexel); |
| uint32_t appliedRowsPerImage = |
| dataSpec.rowsPerImage > 0 ? dataSpec.rowsPerImage : mipSize.height; |
| uint32_t bytesPerImage = bytesPerRow * appliedRowsPerImage; |
| |
| const uint32_t maxArrayLayer = textureSpec.copyOrigin.z + copySize.depthOrArrayLayers; |
| |
| uint64_t dataOffset = dataSpec.offset; |
| const uint32_t byteSizeLastLayer = |
| alignedBytesPerRow * (mipSize.height - 1) + mipSize.width * bytesPerTexel; |
| |
| for (uint32_t slice = textureSpec.copyOrigin.z; slice < maxArrayLayer; ++slice) { |
| // Pack the data in the specified copy region to have the same |
| // format as the expected texture data. |
| std::vector<uint8_t> expected(byteSizeLastLayer, 0); |
| PackTextureData(data.data() + dataOffset, copySize.width, copySize.height, |
| dataSpec.bytesPerRow, expected.data(), copySize.width * bytesPerTexel, |
| bytesPerTexel); |
| |
| EXPECT_TEXTURE_EQ(expected.data(), texture, |
| {textureSpec.copyOrigin.x, textureSpec.copyOrigin.y, slice}, |
| {copySize.width, copySize.height, 1}, descriptor.format, |
| static_cast<uint8_t>(0), textureSpec.level) |
| << "Write to texture failed copying " << dataSpec.size << "-byte data with offset " |
| << dataSpec.offset << " and bytes per row " << dataSpec.bytesPerRow << " to [(" |
| << textureSpec.copyOrigin.x << ", " << textureSpec.copyOrigin.y << "), (" |
| << textureSpec.copyOrigin.x + copySize.width << ", " |
| << textureSpec.copyOrigin.y + copySize.height << ")) region of " |
| << textureSpec.textureSize.width << " x " << textureSpec.textureSize.height |
| << " texture at mip level " << textureSpec.level << " layer " << slice << std::endl; |
| |
| dataOffset += bytesPerImage; |
| } |
| } |
| }; |
| |
| // Test writing the whole texture for varying texture sizes. |
| TEST_P(QueueWriteTextureTests, VaryingTextureSize) { |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 4 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsQualcomm()); |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 6 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsARM()); |
| |
| for (unsigned int w : {127, 128}) { |
| for (unsigned int h : {63, 64}) { |
| for (unsigned int d : {1, 3, 4}) { |
| TextureSpec textureSpec; |
| textureSpec.textureSize = {w, h, d}; |
| textureSpec.copyOrigin = {0, 0, 0}; |
| textureSpec.level = 0; |
| |
| DoTest(textureSpec, MinimumDataSpec({w, h, d}), {w, h, d}); |
| } |
| } |
| } |
| } |
| |
| // Test uploading a large amount of data with writeTexture. |
| TEST_P(QueueWriteTextureTests, LargeWriteTexture) { |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 4 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsQualcomm()); |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 6 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsARM()); |
| |
| TextureSpec textureSpec; |
| textureSpec.textureSize = {2048, 2048, 2}; |
| textureSpec.copyOrigin = {0, 0, 0}; |
| textureSpec.level = 0; |
| |
| DoTest(textureSpec, MinimumDataSpec(textureSpec.textureSize), textureSpec.textureSize); |
| } |
| |
| // Test writing a pixel with an offset. |
| TEST_P(QueueWriteTextureTests, VaryingTextureOffset) { |
| // The entire subresource must be copied when the format is a depth/stencil format. |
| DAWN_TEST_UNSUPPORTED_IF(utils::IsDepthOrStencilFormat(GetParam().mTextureFormat)); |
| |
| constexpr uint32_t kWidth = 259; |
| constexpr uint32_t kHeight = 127; |
| DataSpec pixelData = MinimumDataSpec({1, 1, 1}); |
| |
| constexpr wgpu::Extent3D kCopySize = {1, 1, 1}; |
| constexpr wgpu::Extent3D kTextureSize = {kWidth, kHeight, 1}; |
| TextureSpec defaultTextureSpec; |
| defaultTextureSpec.textureSize = kTextureSize; |
| defaultTextureSpec.level = 0; |
| |
| for (unsigned int w : {0u, kWidth / 7, kWidth / 3, kWidth - 1}) { |
| for (unsigned int h : {0u, kHeight / 7, kHeight / 3, kHeight - 1}) { |
| TextureSpec textureSpec = defaultTextureSpec; |
| textureSpec.copyOrigin = {w, h, 0}; |
| DoTest(textureSpec, pixelData, kCopySize); |
| } |
| } |
| } |
| |
| // Test writing a pixel with an offset to a texture array |
| TEST_P(QueueWriteTextureTests, VaryingTextureArrayOffset) { |
| // The entire subresource must be copied when the format is a depth/stencil format. |
| DAWN_TEST_UNSUPPORTED_IF(utils::IsDepthOrStencilFormat(GetParam().mTextureFormat)); |
| // TODO(crbug.com/dawn/2095): Failing on ANGLE + SwiftShader, needs investigation. |
| DAWN_SUPPRESS_TEST_IF(IsANGLESwiftShader()); |
| |
| constexpr uint32_t kWidth = 259; |
| constexpr uint32_t kHeight = 127; |
| constexpr uint32_t kDepth = 62; |
| DataSpec pixelData = MinimumDataSpec({1, 1, 1}); |
| |
| constexpr wgpu::Extent3D kCopySize = {1, 1, 1}; |
| constexpr wgpu::Extent3D kTextureSize = {kWidth, kHeight, kDepth}; |
| TextureSpec defaultTextureSpec; |
| defaultTextureSpec.textureSize = kTextureSize; |
| defaultTextureSpec.level = 0; |
| |
| for (unsigned int w : {0u, kWidth / 7, kWidth / 3, kWidth - 1}) { |
| for (unsigned int h : {0u, kHeight / 7, kHeight / 3, kHeight - 1}) { |
| for (unsigned int d : {0u, kDepth / 7, kDepth / 3, kDepth - 1}) { |
| TextureSpec textureSpec = defaultTextureSpec; |
| textureSpec.copyOrigin = {w, h, d}; |
| DoTest(textureSpec, pixelData, kCopySize); |
| } |
| } |
| } |
| } |
| |
| // Test writing with varying write sizes. |
| TEST_P(QueueWriteTextureTests, VaryingWriteSize) { |
| // The entire subresource must be copied when the format is a depth/stencil format. |
| DAWN_TEST_UNSUPPORTED_IF(utils::IsDepthOrStencilFormat(GetParam().mTextureFormat)); |
| constexpr uint32_t kWidth = 257; |
| constexpr uint32_t kHeight = 127; |
| for (unsigned int w : {13, 63, 128, 256}) { |
| for (unsigned int h : {16, 19, 32, 63}) { |
| TextureSpec textureSpec; |
| textureSpec.copyOrigin = {0, 0, 0}; |
| textureSpec.level = 0; |
| textureSpec.textureSize = {kWidth, kHeight, 1}; |
| DoTest(textureSpec, MinimumDataSpec({w, h, 1}), {w, h, 1}); |
| } |
| } |
| } |
| |
| // Test writing with varying write sizes to texture arrays. |
| TEST_P(QueueWriteTextureTests, VaryingArrayWriteSize) { |
| // The entire subresource must be copied when the format is a depth/stencil format. |
| DAWN_TEST_UNSUPPORTED_IF(utils::IsDepthOrStencilFormat(GetParam().mTextureFormat)); |
| constexpr uint32_t kWidth = 257; |
| constexpr uint32_t kHeight = 127; |
| constexpr uint32_t kDepth = 65; |
| for (unsigned int w : {13, 63, 128, 256}) { |
| for (unsigned int h : {16, 19, 32, 63}) { |
| for (unsigned int d : {3, 6}) { |
| TextureSpec textureSpec; |
| textureSpec.copyOrigin = {0, 0, 0}; |
| textureSpec.level = 0; |
| textureSpec.textureSize = {kWidth, kHeight, kDepth}; |
| DoTest(textureSpec, MinimumDataSpec({w, h, d}), {w, h, d}); |
| } |
| } |
| } |
| } |
| |
| // Test writing to varying mips |
| TEST_P(QueueWriteTextureTests, TextureWriteToMip) { |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 4 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsQualcomm()); |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 6 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsARM()); |
| |
| constexpr uint32_t kWidth = 259; |
| constexpr uint32_t kHeight = 127; |
| |
| TextureSpec defaultTextureSpec; |
| defaultTextureSpec.copyOrigin = {0, 0, 0}; |
| defaultTextureSpec.textureSize = {kWidth, kHeight, 1}; |
| |
| for (unsigned int i = 1; i < 4; ++i) { |
| TextureSpec textureSpec = defaultTextureSpec; |
| textureSpec.level = i; |
| DoTest(textureSpec, MinimumDataSpec({kWidth >> i, kHeight >> i, 1}), |
| {kWidth >> i, kHeight >> i, 1}); |
| } |
| } |
| |
| // Test writing with different multiples of texel block size as data offset |
| TEST_P(QueueWriteTextureTests, VaryingDataOffset) { |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 4 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsQualcomm()); |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 6 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsARM()); |
| |
| constexpr uint32_t kWidth = 259; |
| constexpr uint32_t kHeight = 127; |
| |
| TextureSpec textureSpec; |
| textureSpec.copyOrigin = {0, 0, 0}; |
| textureSpec.textureSize = {kWidth, kHeight, 1}; |
| textureSpec.level = 0; |
| |
| for (uint64_t offset : {1, 2, 4, 17, 64, 128, 300}) { |
| DataSpec dataSpec = MinimumDataSpec({kWidth, kHeight, 1}); |
| dataSpec.size += offset; |
| dataSpec.offset += offset; |
| DoTest(textureSpec, dataSpec, {kWidth, kHeight, 1}); |
| } |
| } |
| |
| // Test writing with rowsPerImage greater than needed. |
| TEST_P(QueueWriteTextureTests, VaryingRowsPerImage) { |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 4 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsQualcomm()); |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 6 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsARM()); |
| |
| constexpr uint32_t kWidth = 65; |
| constexpr uint32_t kHeight = 31; |
| constexpr uint32_t kDepth = 17; |
| |
| TextureSpec textureSpec; |
| textureSpec.textureSize = {kWidth, kHeight, kDepth}; |
| textureSpec.level = 0; |
| |
| auto TestBody = [&](wgpu::Origin3D copyOrigin, wgpu::Extent3D copySize) { |
| textureSpec.copyOrigin = copyOrigin; |
| for (unsigned int r : {1, 2, 3, 64, 200}) { |
| DataSpec dataSpec = |
| MinimumDataSpec(copySize, kStrideComputeDefault, copySize.height + r); |
| DoTest(textureSpec, dataSpec, copySize); |
| } |
| }; |
| |
| TestBody({0, 0, 0}, textureSpec.textureSize); |
| |
| if (utils::IsDepthOrStencilFormat(GetParam().mTextureFormat)) { |
| // The entire subresource must be copied when the format is a depth/stencil format. |
| return; |
| } |
| |
| TestBody({1, 1, 1}, {kWidth - 1, kHeight - 1, kDepth - 1}); |
| } |
| |
| // Test with bytesPerRow greater than needed |
| TEST_P(QueueWriteTextureTests, VaryingBytesPerRow) { |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 4 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsQualcomm()); |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 6 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsARM()); |
| |
| constexpr uint32_t kWidth = 257; |
| constexpr uint32_t kHeight = 129; |
| |
| TextureSpec textureSpec; |
| textureSpec.textureSize = {kWidth, kHeight, 1}; |
| textureSpec.level = 0; |
| |
| auto TestBody = [&](wgpu::Origin3D copyOrigin, wgpu::Extent3D copyExtent) { |
| textureSpec.copyOrigin = copyOrigin; |
| for (unsigned int b : {1, 2, 3, 4}) { |
| uint32_t bytesPerRow = |
| copyExtent.width * utils::GetTexelBlockSizeInBytes(GetParam().mTextureFormat) + b; |
| DoTest(textureSpec, MinimumDataSpec(copyExtent, bytesPerRow), copyExtent); |
| } |
| }; |
| |
| TestBody({0, 0, 0}, textureSpec.textureSize); |
| |
| if (utils::IsDepthOrStencilFormat(GetParam().mTextureFormat)) { |
| // The entire subresource must be copied when the format is a depth/stencil format. |
| return; |
| } |
| |
| TestBody({1, 2, 0}, {17, 19, 1}); |
| } |
| |
| // Test that writing with bytesPerRow = 0 and bytesPerRow < bytesInACompleteRow works |
| // when we're copying one row only |
| TEST_P(QueueWriteTextureTests, BytesPerRowWithOneRowCopy) { |
| // The entire subresource must be copied when the format is a depth/stencil format. |
| DAWN_TEST_UNSUPPORTED_IF(utils::IsDepthOrStencilFormat(GetParam().mTextureFormat)); |
| |
| constexpr uint32_t kWidth = 259; |
| constexpr uint32_t kHeight = 127; |
| |
| TextureSpec textureSpec; |
| textureSpec.copyOrigin = {0, 0, 0}; |
| textureSpec.textureSize = {kWidth, kHeight, 1}; |
| textureSpec.level = 0; |
| |
| { |
| constexpr wgpu::Extent3D copyExtent = {5, 1, 1}; |
| DataSpec dataSpec = MinimumDataSpec(copyExtent); |
| |
| // bytesPerRow undefined |
| dataSpec.bytesPerRow = wgpu::kCopyStrideUndefined; |
| DoTest(textureSpec, dataSpec, copyExtent); |
| } |
| } |
| |
| // Test with bytesPerRow greater than needed in a write to a texture array. |
| TEST_P(QueueWriteTextureTests, VaryingArrayBytesPerRow) { |
| // TODO(crbug.com/dawn/2095): Failing on ANGLE + SwiftShader, needs investigation. |
| DAWN_SUPPRESS_TEST_IF(IsANGLESwiftShader()); |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 4 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsQualcomm()); |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 6 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsARM()); |
| |
| constexpr uint32_t kWidth = 257; |
| constexpr uint32_t kHeight = 129; |
| constexpr uint32_t kLayers = 65; |
| |
| TextureSpec textureSpec; |
| textureSpec.textureSize = {kWidth, kHeight, kLayers}; |
| textureSpec.level = 0; |
| |
| auto TestBody = [&](wgpu::Origin3D copyOrigin, wgpu::Extent3D copyExtent) { |
| textureSpec.copyOrigin = copyOrigin; |
| // Test with bytesPerRow divisible by blockWidth |
| for (unsigned int b : {1, 2, 3, 65, 300}) { |
| uint32_t bytesPerRow = |
| (copyExtent.width + b) * utils::GetTexelBlockSizeInBytes(GetParam().mTextureFormat); |
| uint32_t rowsPerImage = copyExtent.height; |
| DoTest(textureSpec, MinimumDataSpec(copyExtent, bytesPerRow, rowsPerImage), copyExtent); |
| } |
| |
| // Test with bytesPerRow not divisible by blockWidth |
| for (unsigned int b : {1, 2, 3, 19, 301}) { |
| uint32_t bytesPerRow = |
| copyExtent.width * utils::GetTexelBlockSizeInBytes(GetParam().mTextureFormat) + b; |
| uint32_t rowsPerImage = copyExtent.height; |
| DoTest(textureSpec, MinimumDataSpec(copyExtent, bytesPerRow, rowsPerImage), copyExtent); |
| } |
| }; |
| |
| TestBody({0, 0, 0}, textureSpec.textureSize); |
| |
| if (utils::IsDepthOrStencilFormat(GetParam().mTextureFormat)) { |
| // The entire subresource must be copied when the format is a depth/stencil format. |
| return; |
| } |
| |
| TestBody({1, 2, 3}, {17, 19, 21}); |
| } |
| |
| // Test valid special cases of bytesPerRow and rowsPerImage (0 or undefined). |
| TEST_P(QueueWriteTextureTests, StrideSpecialCases) { |
| // The entire subresource must be copied when the format is a depth/stencil format. |
| DAWN_TEST_UNSUPPORTED_IF(utils::IsDepthOrStencilFormat(GetParam().mTextureFormat)); |
| |
| TextureSpec textureSpec; |
| textureSpec.copyOrigin = {0, 0, 0}; |
| textureSpec.textureSize = {4, 4, 4}; |
| textureSpec.level = 0; |
| |
| // bytesPerRow 0 |
| for (const wgpu::Extent3D copyExtent : |
| {wgpu::Extent3D{0, 2, 2}, {0, 0, 2}, {0, 2, 0}, {0, 0, 0}}) { |
| DoTest(textureSpec, MinimumDataSpec(copyExtent, 0, 2), copyExtent); |
| } |
| |
| // bytesPerRow undefined |
| for (const wgpu::Extent3D copyExtent : |
| {wgpu::Extent3D{2, 1, 1}, {2, 0, 1}, {2, 1, 0}, {2, 0, 0}}) { |
| DoTest(textureSpec, MinimumDataSpec(copyExtent, wgpu::kCopyStrideUndefined, 2), copyExtent); |
| } |
| |
| // rowsPerImage 0 |
| for (const wgpu::Extent3D copyExtent : |
| {wgpu::Extent3D{2, 0, 2}, {2, 0, 0}, {0, 0, 2}, {0, 0, 0}}) { |
| DoTest(textureSpec, MinimumDataSpec(copyExtent, 256, 0), copyExtent); |
| } |
| |
| // rowsPerImage undefined |
| for (const wgpu::Extent3D copyExtent : {wgpu::Extent3D{2, 2, 1}, {2, 2, 0}}) { |
| DoTest(textureSpec, MinimumDataSpec(copyExtent, 256, wgpu::kCopyStrideUndefined), |
| copyExtent); |
| } |
| } |
| |
| // Testing a special code path: writing when dynamic uploader already contatins some unaligned |
| // data, it might be necessary to use a ring buffer with properly aligned offset. |
| TEST_P(QueueWriteTextureTests, UnalignedDynamicUploader) { |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 4 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsQualcomm()); |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 6 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsARM()); |
| |
| utils::UnalignDynamicUploader(device); |
| |
| constexpr wgpu::Extent3D size = {10, 10, 1}; |
| |
| TextureSpec textureSpec; |
| textureSpec.textureSize = size; |
| textureSpec.copyOrigin = {0, 0, 0}; |
| textureSpec.level = 0; |
| |
| DoTest(textureSpec, MinimumDataSpec(size), size); |
| } |
| |
| DAWN_INSTANTIATE_TEST_P(QueueWriteTextureTests, |
| {D3D11Backend(), D3D12Backend(), |
| D3D12Backend({"d3d12_use_temp_buffer_in_depth_stencil_texture_and_buffer_" |
| "copy_with_non_zero_buffer_offset"}), |
| MetalBackend(), |
| MetalBackend({"use_blit_for_buffer_to_depth_texture_copy", |
| "use_blit_for_buffer_to_stencil_texture_copy"}), |
| OpenGLBackend(), OpenGLESBackend(), |
| OpenGLESBackend({"use_blit_for_stencil_texture_write"}), VulkanBackend()}, |
| { |
| wgpu::TextureFormat::R8Unorm, |
| wgpu::TextureFormat::RG8Unorm, |
| wgpu::TextureFormat::RGBA8Unorm, |
| wgpu::TextureFormat::Stencil8, |
| }); |
| |
| class QueueWriteTextureSimpleTests : public DawnTest { |
| protected: |
| void DoSimpleWriteTextureTest(uint32_t width, uint32_t height) { |
| constexpr wgpu::TextureFormat kFormat = wgpu::TextureFormat::RGBA8Unorm; |
| constexpr uint32_t kPixelSize = 4; |
| |
| std::vector<uint32_t> data(width * height); |
| for (size_t i = 0; i < data.size(); i++) { |
| data[i] = 0xFFFFFFFF; |
| } |
| |
| wgpu::TextureDescriptor descriptor = {}; |
| descriptor.size = {width, height, 1}; |
| descriptor.format = kFormat; |
| descriptor.usage = wgpu::TextureUsage::CopyDst | wgpu::TextureUsage::CopySrc; |
| wgpu::Texture texture = device.CreateTexture(&descriptor); |
| |
| wgpu::ImageCopyTexture imageCopyTexture = |
| utils::CreateImageCopyTexture(texture, 0, {0, 0, 0}); |
| wgpu::TextureDataLayout textureDataLayout = |
| utils::CreateTextureDataLayout(0, width * kPixelSize); |
| wgpu::Extent3D copyExtent = {width, height, 1}; |
| device.GetQueue().WriteTexture(&imageCopyTexture, data.data(), width * height * kPixelSize, |
| &textureDataLayout, ©Extent); |
| |
| EXPECT_TEXTURE_EQ(data.data(), texture, {0, 0}, {width, height}); |
| } |
| }; |
| |
| // This tests for a bug that occurred within the D3D12 CopyTextureSplitter, which incorrectly copied |
| // data when the internal offset was larger than 256, but less than 512 and the copy size was 64 |
| // width or less with a height of 1. |
| TEST_P(QueueWriteTextureSimpleTests, WriteTo64x1TextureFromUnalignedDynamicUploader) { |
| // First, WriteTexture with 96 pixels, or 384 bytes to create an offset in the dynamic uploader. |
| DoSimpleWriteTextureTest(96, 1); |
| |
| // Now test writing to a 64x1 texture. Because a 64x1 texture's row pitch is equal to its slice |
| // pitch, the texture copy offset could be calculated incorrectly inside the internal D3D12 |
| // TextureCopySplitter. |
| DoSimpleWriteTextureTest(64, 1); |
| } |
| |
| // This tests for a bug in the allocation of internal staging buffer, which incorrectly copied depth |
| // stencil data to the internal offset that is not a multiple of 4. |
| TEST_P(QueueWriteTextureSimpleTests, WriteStencilAspectWithSourceOffsetUnalignedTo4) { |
| // TODO(crbug.com/dawn/2095): Failing on ANGLE + SwiftShader, needs investigation. |
| DAWN_SUPPRESS_TEST_IF(IsANGLESwiftShader()); |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 4 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsQualcomm()); |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 6 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsARM()); |
| |
| wgpu::TextureDescriptor textureDescriptor; |
| textureDescriptor.format = wgpu::TextureFormat::Depth24PlusStencil8; |
| textureDescriptor.usage = wgpu::TextureUsage::CopySrc | wgpu::TextureUsage::CopyDst; |
| textureDescriptor.size = {1, 1, 1}; |
| wgpu::Texture dstTexture1 = device.CreateTexture(&textureDescriptor); |
| wgpu::Texture dstTexture2 = device.CreateTexture(&textureDescriptor); |
| |
| wgpu::BufferDescriptor bufferDescriptor; |
| bufferDescriptor.size = 8u; |
| bufferDescriptor.usage = wgpu::BufferUsage::CopySrc | wgpu::BufferUsage::CopyDst; |
| wgpu::Buffer outputBuffer = device.CreateBuffer(&bufferDescriptor); |
| wgpu::CommandEncoder encoder = device.CreateCommandEncoder(); |
| |
| constexpr wgpu::Extent3D kWriteSize = {1, 1, 1}; |
| constexpr uint8_t kData[] = {1, 2}; |
| constexpr uint32_t kBytesPerRowForWriteTexture = 1u; |
| |
| std::vector<uint8_t> expectedData(8, 0); |
| |
| // In the first call of queue.writeTexture(), Dawn will allocate a new staging buffer in its |
| // internal ring buffer and write the user data into it at the offset 0. |
| { |
| constexpr uint32_t kDataOffset1 = 0u; |
| wgpu::TextureDataLayout textureDataLayout = |
| utils::CreateTextureDataLayout(kDataOffset1, kBytesPerRowForWriteTexture); |
| wgpu::ImageCopyTexture imageCopyTexture = utils::CreateImageCopyTexture( |
| dstTexture1, 0, {0, 0, 0}, wgpu::TextureAspect::StencilOnly); |
| queue.WriteTexture(&imageCopyTexture, kData, sizeof(kData), &textureDataLayout, |
| &kWriteSize); |
| |
| constexpr uint32_t kOutputBufferOffset1 = 0u; |
| wgpu::ImageCopyBuffer imageCopyBuffer = utils::CreateImageCopyBuffer( |
| outputBuffer, kOutputBufferOffset1, kTextureBytesPerRowAlignment); |
| encoder.CopyTextureToBuffer(&imageCopyTexture, &imageCopyBuffer, &kWriteSize); |
| |
| expectedData[kOutputBufferOffset1] = kData[kDataOffset1]; |
| } |
| |
| // In the second call of queue.writeTexture(), Dawn will still use the same staging buffer |
| // allocated in the first call, whose first 2 bytes have been used in the first call of |
| // queue.writeTexture(). Dawn should write the user data at the offset 4 bytes since the |
| // destination texture aspect is stencil. |
| { |
| constexpr uint32_t kDataOffset2 = 1u; |
| wgpu::TextureDataLayout textureDataLayout = |
| utils::CreateTextureDataLayout(kDataOffset2, kBytesPerRowForWriteTexture); |
| wgpu::ImageCopyTexture imageCopyTexture = utils::CreateImageCopyTexture( |
| dstTexture2, 0, {0, 0, 0}, wgpu::TextureAspect::StencilOnly); |
| queue.WriteTexture(&imageCopyTexture, kData, sizeof(kData), &textureDataLayout, |
| &kWriteSize); |
| |
| constexpr uint32_t kOutputBufferOffset2 = 4u; |
| wgpu::ImageCopyBuffer imageCopyBuffer = utils::CreateImageCopyBuffer( |
| outputBuffer, kOutputBufferOffset2, kTextureBytesPerRowAlignment); |
| encoder.CopyTextureToBuffer(&imageCopyTexture, &imageCopyBuffer, &kWriteSize); |
| |
| expectedData[kOutputBufferOffset2] = kData[kDataOffset2]; |
| } |
| |
| wgpu::CommandBuffer commandBuffer = encoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| EXPECT_BUFFER_U8_RANGE_EQ(expectedData.data(), outputBuffer, 0, 8); |
| } |
| |
| // Tests calling queue.writeTexture() to a depth texture after calling queue.writeTexture() on |
| // another texture always works. On some D3D12 backends the buffer offset of buffer-to-texture |
| // copies must be a multiple of 512 when the destination texture is a depth stencil texture. |
| TEST_P(QueueWriteTextureSimpleTests, WriteDepthAspectAfterOtherQueueWriteTextureCalls) { |
| wgpu::TextureDescriptor textureDescriptor; |
| textureDescriptor.format = wgpu::TextureFormat::Depth16Unorm; |
| textureDescriptor.usage = wgpu::TextureUsage::CopySrc | wgpu::TextureUsage::CopyDst; |
| textureDescriptor.size = {1, 1, 1}; |
| wgpu::Texture depthTexture1 = device.CreateTexture(&textureDescriptor); |
| wgpu::Texture depthTexture2 = device.CreateTexture(&textureDescriptor); |
| |
| constexpr uint16_t kExpectedData1 = (204 << 8) | 205; |
| wgpu::ImageCopyTexture imageCopyTexture1 = utils::CreateImageCopyTexture(depthTexture1); |
| // (Off-topic) spot-test for defaulting of .aspect. |
| imageCopyTexture1.aspect = wgpu::TextureAspect::Undefined; |
| wgpu::TextureDataLayout textureDataLayout = |
| utils::CreateTextureDataLayout(0, sizeof(kExpectedData1)); |
| queue.WriteTexture(&imageCopyTexture1, &kExpectedData1, sizeof(kExpectedData1), |
| &textureDataLayout, &textureDescriptor.size); |
| |
| constexpr uint16_t kExpectedData2 = (206 << 8) | 207; |
| wgpu::ImageCopyTexture imageCopyTexture2 = utils::CreateImageCopyTexture(depthTexture2); |
| queue.WriteTexture(&imageCopyTexture2, &kExpectedData2, sizeof(kExpectedData2), |
| &textureDataLayout, &textureDescriptor.size); |
| |
| EXPECT_TEXTURE_EQ(&kExpectedData1, depthTexture1, {0, 0}, {1, 1}, 0, |
| wgpu::TextureAspect::DepthOnly); |
| EXPECT_TEXTURE_EQ(&kExpectedData2, depthTexture2, {0, 0}, {1, 1}, 0, |
| wgpu::TextureAspect::DepthOnly); |
| } |
| |
| // Tests calling queue.writeTexture() to the stencil aspect after calling queue.writeTexture() on |
| // another texture always works. On some D3D12 backends the buffer offset of buffer-to-texture |
| // copies must be a multiple of 512 when the destination texture is a depth stencil texture. |
| TEST_P(QueueWriteTextureSimpleTests, WriteStencilAspectAfterOtherQueueWriteTextureCalls) { |
| // TODO(crbug.com/dawn/2095): Failing on ANGLE + SwiftShader, needs investigation. |
| DAWN_SUPPRESS_TEST_IF(IsANGLESwiftShader()); |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 4 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsQualcomm()); |
| // TODO(crbug.com/dawn/2295): diagnose this failure on Pixel 6 OpenGLES |
| DAWN_SUPPRESS_TEST_IF(IsOpenGLES() && IsAndroid() && IsARM()); |
| |
| wgpu::TextureDescriptor textureDescriptor; |
| textureDescriptor.format = wgpu::TextureFormat::Depth24PlusStencil8; |
| textureDescriptor.usage = wgpu::TextureUsage::CopySrc | wgpu::TextureUsage::CopyDst; |
| textureDescriptor.size = {1, 1, 1}; |
| wgpu::Texture depthStencilTexture1 = device.CreateTexture(&textureDescriptor); |
| wgpu::Texture depthStencilTexture2 = device.CreateTexture(&textureDescriptor); |
| |
| constexpr uint8_t kExpectedData1 = 204u; |
| wgpu::ImageCopyTexture imageCopyTexture1 = utils::CreateImageCopyTexture( |
| depthStencilTexture1, 0, {0, 0, 0}, wgpu::TextureAspect::StencilOnly); |
| wgpu::TextureDataLayout textureDataLayout = |
| utils::CreateTextureDataLayout(0, sizeof(kExpectedData1)); |
| queue.WriteTexture(&imageCopyTexture1, &kExpectedData1, sizeof(kExpectedData1), |
| &textureDataLayout, &textureDescriptor.size); |
| |
| constexpr uint8_t kExpectedData2 = 205; |
| wgpu::ImageCopyTexture imageCopyTexture2 = utils::CreateImageCopyTexture( |
| depthStencilTexture2, 0, {0, 0, 0}, wgpu::TextureAspect::StencilOnly); |
| queue.WriteTexture(&imageCopyTexture2, &kExpectedData2, sizeof(kExpectedData2), |
| &textureDataLayout, &textureDescriptor.size); |
| |
| EXPECT_TEXTURE_EQ(&kExpectedData1, depthStencilTexture1, {0, 0}, {1, 1}, 0, |
| wgpu::TextureAspect::StencilOnly); |
| EXPECT_TEXTURE_EQ(&kExpectedData2, depthStencilTexture2, {0, 0}, {1, 1}, 0, |
| wgpu::TextureAspect::StencilOnly); |
| } |
| |
| DAWN_INSTANTIATE_TEST(QueueWriteTextureSimpleTests, |
| D3D11Backend(), |
| D3D12Backend(), |
| MetalBackend(), |
| OpenGLBackend(), |
| OpenGLESBackend(), |
| VulkanBackend()); |
| |
| } // anonymous namespace |
| } // namespace dawn |