// Copyright 2017 The Dawn Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#include "dawn_native/ShaderModule.h"

#include "dawn_native/BindGroupLayout.h"
#include "dawn_native/Device.h"
#include "dawn_native/ObjectContentHasher.h"
#include "dawn_native/Pipeline.h"
#include "dawn_native/PipelineLayout.h"
#include "dawn_native/SpirvUtils.h"

#include <spirv-tools/libspirv.hpp>
#include <spirv-tools/optimizer.hpp>
#include <spirv_cross.hpp>

#ifdef DAWN_ENABLE_WGSL
// Tint include must be after spirv_cross.hpp, because spirv-cross has its own
// version of spirv_headers. We also need to undef SPV_REVISION because SPIRV-Cross
// is at 3 while spirv-headers is at 4.
#    undef SPV_REVISION
#    include <tint/tint.h>
#endif  // DAWN_ENABLE_WGSL

#include <sstream>

namespace dawn_native {

    namespace {

        std::string GetShaderDeclarationString(BindGroupIndex group, BindingNumber binding) {
            std::ostringstream ostream;
            ostream << "the shader module declaration at set " << static_cast<uint32_t>(group)
                    << " binding " << static_cast<uint32_t>(binding);
            return ostream.str();
        }

#ifdef DAWN_ENABLE_WGSL
        tint::transform::VertexFormat ToTintVertexFormat(wgpu::VertexFormat format) {
            switch (format) {
                case wgpu::VertexFormat::UChar2:
                    return tint::transform::VertexFormat::kVec2U8;
                case wgpu::VertexFormat::UChar4:
                    return tint::transform::VertexFormat::kVec4U8;
                case wgpu::VertexFormat::Char2:
                    return tint::transform::VertexFormat::kVec2I8;
                case wgpu::VertexFormat::Char4:
                    return tint::transform::VertexFormat::kVec4I8;
                case wgpu::VertexFormat::UChar2Norm:
                    return tint::transform::VertexFormat::kVec2U8Norm;
                case wgpu::VertexFormat::UChar4Norm:
                    return tint::transform::VertexFormat::kVec4U8Norm;
                case wgpu::VertexFormat::Char2Norm:
                    return tint::transform::VertexFormat::kVec2I8Norm;
                case wgpu::VertexFormat::Char4Norm:
                    return tint::transform::VertexFormat::kVec4I8Norm;
                case wgpu::VertexFormat::UShort2:
                    return tint::transform::VertexFormat::kVec2U16;
                case wgpu::VertexFormat::UShort4:
                    return tint::transform::VertexFormat::kVec4U16;
                case wgpu::VertexFormat::Short2:
                    return tint::transform::VertexFormat::kVec2I16;
                case wgpu::VertexFormat::Short4:
                    return tint::transform::VertexFormat::kVec4I16;
                case wgpu::VertexFormat::UShort2Norm:
                    return tint::transform::VertexFormat::kVec2U16Norm;
                case wgpu::VertexFormat::UShort4Norm:
                    return tint::transform::VertexFormat::kVec4U16Norm;
                case wgpu::VertexFormat::Short2Norm:
                    return tint::transform::VertexFormat::kVec2I16Norm;
                case wgpu::VertexFormat::Short4Norm:
                    return tint::transform::VertexFormat::kVec4I16Norm;
                case wgpu::VertexFormat::Half2:
                    return tint::transform::VertexFormat::kVec2F16;
                case wgpu::VertexFormat::Half4:
                    return tint::transform::VertexFormat::kVec4F16;
                case wgpu::VertexFormat::Float:
                    return tint::transform::VertexFormat::kF32;
                case wgpu::VertexFormat::Float2:
                    return tint::transform::VertexFormat::kVec2F32;
                case wgpu::VertexFormat::Float3:
                    return tint::transform::VertexFormat::kVec3F32;
                case wgpu::VertexFormat::Float4:
                    return tint::transform::VertexFormat::kVec4F32;
                case wgpu::VertexFormat::UInt:
                    return tint::transform::VertexFormat::kU32;
                case wgpu::VertexFormat::UInt2:
                    return tint::transform::VertexFormat::kVec2U32;
                case wgpu::VertexFormat::UInt3:
                    return tint::transform::VertexFormat::kVec3U32;
                case wgpu::VertexFormat::UInt4:
                    return tint::transform::VertexFormat::kVec4U32;
                case wgpu::VertexFormat::Int:
                    return tint::transform::VertexFormat::kI32;
                case wgpu::VertexFormat::Int2:
                    return tint::transform::VertexFormat::kVec2I32;
                case wgpu::VertexFormat::Int3:
                    return tint::transform::VertexFormat::kVec3I32;
                case wgpu::VertexFormat::Int4:
                    return tint::transform::VertexFormat::kVec4I32;
            }
        }

        tint::transform::InputStepMode ToTintInputStepMode(wgpu::InputStepMode mode) {
            switch (mode) {
                case wgpu::InputStepMode::Vertex:
                    return tint::transform::InputStepMode::kVertex;
                case wgpu::InputStepMode::Instance:
                    return tint::transform::InputStepMode::kInstance;
            }
        }

        SingleShaderStage PipelineStateToShaderStage(tint::ast::PipelineStage stage) {
            switch (stage) {
                case tint::ast::PipelineStage::kVertex:
                    return SingleShaderStage::Vertex;
                case tint::ast::PipelineStage::kFragment:
                    return SingleShaderStage::Fragment;
                case tint::ast::PipelineStage::kCompute:
                    return SingleShaderStage::Compute;
                default:
                    UNREACHABLE();
            }
        }

#endif  // DAWN_ENABLE_WGSL

        MaybeError ValidateSpirv(const uint32_t* code, uint32_t codeSize) {
            spvtools::SpirvTools spirvTools(SPV_ENV_VULKAN_1_1);

            std::ostringstream errorStream;
            errorStream << "SPIRV Validation failure:" << std::endl;

            spirvTools.SetMessageConsumer([&errorStream](spv_message_level_t level, const char*,
                                                         const spv_position_t& position,
                                                         const char* message) {
                switch (level) {
                    case SPV_MSG_FATAL:
                    case SPV_MSG_INTERNAL_ERROR:
                    case SPV_MSG_ERROR:
                        errorStream << "error: line " << position.index << ": " << message
                                    << std::endl;
                        break;
                    case SPV_MSG_WARNING:
                        errorStream << "warning: line " << position.index << ": " << message
                                    << std::endl;
                        break;
                    case SPV_MSG_INFO:
                        errorStream << "info: line " << position.index << ": " << message
                                    << std::endl;
                        break;
                    default:
                        break;
                }
            });

            if (!spirvTools.Validate(code, codeSize)) {
                std::string disassembly;
                if (spirvTools.Disassemble(std::vector<uint32_t>(code, code + codeSize),
                                           &disassembly)) {
                    errorStream << "disassembly:" << std::endl << disassembly;
                }

                return DAWN_VALIDATION_ERROR(errorStream.str().c_str());
            }

            return {};
        }

#ifdef DAWN_ENABLE_WGSL
        ResultOrError<tint::ast::Module> ParseWGSL(const tint::Source::File* file) {
            std::ostringstream errorStream;
            errorStream << "Tint WGSL reader failure:" << std::endl;

            tint::reader::wgsl::Parser parser(file);
            if (!parser.Parse()) {
                auto err = tint::diag::Formatter{}.format(parser.diagnostics());
                errorStream << "Parser: " << err << std::endl
                            << "Shader: " << std::endl
                            << file->content << std::endl;
                return DAWN_VALIDATION_ERROR(errorStream.str().c_str());
            }

            tint::ast::Module module = parser.module();
            if (!module.IsValid()) {
                errorStream << "Invalid module generated..." << std::endl;
                return DAWN_VALIDATION_ERROR(errorStream.str().c_str());
            }

            tint::TypeDeterminer typeDeterminer(&module);
            if (!typeDeterminer.Determine()) {
                errorStream << "Type Determination: " << typeDeterminer.error();
                return DAWN_VALIDATION_ERROR(errorStream.str().c_str());
            }

            return std::move(module);
        }

        ResultOrError<tint::ast::Module> ParseSPIRV(const std::vector<uint32_t>& spirv) {
            std::ostringstream errorStream;
            errorStream << "Tint SPIRV reader failure:" << std::endl;

            tint::reader::spirv::Parser parser(spirv);
            if (!parser.Parse()) {
                errorStream << "Parser: " << parser.error() << std::endl;
                return DAWN_VALIDATION_ERROR(errorStream.str().c_str());
            }

            tint::ast::Module module = parser.module();
            if (!module.IsValid()) {
                errorStream << "Invalid module generated..." << std::endl;
                return DAWN_VALIDATION_ERROR(errorStream.str().c_str());
            }

            tint::TypeDeterminer typeDeterminer(&module);
            if (!typeDeterminer.Determine()) {
                errorStream << "Type Determination: " << typeDeterminer.error();
                return DAWN_VALIDATION_ERROR(errorStream.str().c_str());
            }

            return std::move(module);
        }

        MaybeError ValidateModule(tint::ast::Module* module) {
            std::ostringstream errorStream;
            errorStream << "Tint module validation" << std::endl;

            tint::Validator validator;
            if (!validator.Validate(module)) {
                auto err = tint::diag::Formatter{}.format(validator.diagnostics());
                errorStream << "Validation: " << err << std::endl;
                return DAWN_VALIDATION_ERROR(errorStream.str().c_str());
            }

            return {};
        }

        ResultOrError<std::vector<uint32_t>> ModuleToSPIRV(tint::ast::Module module) {
            std::ostringstream errorStream;
            errorStream << "Tint SPIR-V writer failure:" << std::endl;

            tint::writer::spirv::Generator generator(std::move(module));
            if (!generator.Generate()) {
                errorStream << "Generator: " << generator.error() << std::endl;
                return DAWN_VALIDATION_ERROR(errorStream.str().c_str());
            }

            std::vector<uint32_t> spirv = generator.result();
            return std::move(spirv);
        }
#endif  // DAWN_ENABLE_WGSL

        std::vector<uint64_t> GetBindGroupMinBufferSizes(
            const EntryPointMetadata::BindingGroupInfoMap& shaderBindings,
            const BindGroupLayoutBase* layout) {
            std::vector<uint64_t> requiredBufferSizes(layout->GetUnverifiedBufferCount());
            uint32_t packedIdx = 0;

            for (BindingIndex bindingIndex{0}; bindingIndex < layout->GetBufferCount();
                 ++bindingIndex) {
                const BindingInfo& bindingInfo = layout->GetBindingInfo(bindingIndex);
                if (bindingInfo.buffer.minBindingSize != 0) {
                    // Skip bindings that have minimum buffer size set in the layout
                    continue;
                }

                ASSERT(packedIdx < requiredBufferSizes.size());
                const auto& shaderInfo = shaderBindings.find(bindingInfo.binding);
                if (shaderInfo != shaderBindings.end()) {
                    requiredBufferSizes[packedIdx] = shaderInfo->second.buffer.minBindingSize;
                } else {
                    // We have to include buffers if they are included in the bind group's
                    // packed vector. We don't actually need to check these at draw time, so
                    // if this is a problem in the future we can optimize it further.
                    requiredBufferSizes[packedIdx] = 0;
                }
                ++packedIdx;
            }

            return requiredBufferSizes;
        }

        ResultOrError<std::vector<uint32_t>> RunRobustBufferAccessPass(
            const std::vector<uint32_t>& spirv) {
            spvtools::Optimizer opt(SPV_ENV_VULKAN_1_1);

            std::ostringstream errorStream;
            errorStream << "SPIRV Optimizer failure:" << std::endl;
            opt.SetMessageConsumer([&errorStream](spv_message_level_t level, const char*,
                                                  const spv_position_t& position,
                                                  const char* message) {
                switch (level) {
                    case SPV_MSG_FATAL:
                    case SPV_MSG_INTERNAL_ERROR:
                    case SPV_MSG_ERROR:
                        errorStream << "error: line " << position.index << ": " << message
                                    << std::endl;
                        break;
                    case SPV_MSG_WARNING:
                        errorStream << "warning: line " << position.index << ": " << message
                                    << std::endl;
                        break;
                    case SPV_MSG_INFO:
                        errorStream << "info: line " << position.index << ": " << message
                                    << std::endl;
                        break;
                    default:
                        break;
                }
            });
            opt.RegisterPass(spvtools::CreateGraphicsRobustAccessPass());

            std::vector<uint32_t> result;
            if (!opt.Run(spirv.data(), spirv.size(), &result, spvtools::ValidatorOptions(),
                         false)) {
                return DAWN_VALIDATION_ERROR(errorStream.str().c_str());
            }
            return std::move(result);
        }

        MaybeError ValidateCompatibilityWithBindGroupLayout(DeviceBase* device,
                                                            BindGroupIndex group,
                                                            const EntryPointMetadata& entryPoint,
                                                            const BindGroupLayoutBase* layout) {
            const BindGroupLayoutBase::BindingMap& layoutBindings = layout->GetBindingMap();

            // Iterate over all bindings used by this group in the shader, and find the
            // corresponding binding in the BindGroupLayout, if it exists.
            for (const auto& it : entryPoint.bindings[group]) {
                BindingNumber bindingNumber = it.first;
                const EntryPointMetadata::ShaderBindingInfo& shaderInfo = it.second;

                const auto& bindingIt = layoutBindings.find(bindingNumber);
                if (bindingIt == layoutBindings.end()) {
                    return DAWN_VALIDATION_ERROR("Missing bind group layout entry for " +
                                                 GetShaderDeclarationString(group, bindingNumber));
                }
                BindingIndex bindingIndex(bindingIt->second);
                const BindingInfo& layoutInfo = layout->GetBindingInfo(bindingIndex);

                if (layoutInfo.bindingType != shaderInfo.bindingType) {
                    return DAWN_VALIDATION_ERROR(
                        "The binding type of the bind group layout entry conflicts " +
                        GetShaderDeclarationString(group, bindingNumber));
                }

                if ((layoutInfo.visibility & StageBit(entryPoint.stage)) == 0) {
                    return DAWN_VALIDATION_ERROR("The bind group layout entry for " +
                                                 GetShaderDeclarationString(group, bindingNumber) +
                                                 " is not visible for the shader stage");
                }

                switch (layoutInfo.bindingType) {
                    case BindingInfoType::Texture: {
                        if (layoutInfo.texture.multisampled != shaderInfo.texture.multisampled) {
                            return DAWN_VALIDATION_ERROR(
                                "The texture multisampled flag of the bind group layout entry is "
                                "different from " +
                                GetShaderDeclarationString(group, bindingNumber));
                        }

                        if (layoutInfo.texture.sampleType != shaderInfo.texture.sampleType) {
                            return DAWN_VALIDATION_ERROR(
                                "The texture sampleType of the bind group layout entry is "
                                "different from " +
                                GetShaderDeclarationString(group, bindingNumber));
                        }

                        if (layoutInfo.texture.viewDimension != shaderInfo.texture.viewDimension) {
                            return DAWN_VALIDATION_ERROR(
                                "The texture viewDimension of the bind group layout entry is "
                                "different "
                                "from " +
                                GetShaderDeclarationString(group, bindingNumber));
                        }
                        break;
                    }

                    case BindingInfoType::StorageTexture: {
                        ASSERT(layoutInfo.storageTexture.format != wgpu::TextureFormat::Undefined);
                        ASSERT(shaderInfo.storageTexture.format != wgpu::TextureFormat::Undefined);

                        if (layoutInfo.storageTexture.access != shaderInfo.storageTexture.access) {
                            return DAWN_VALIDATION_ERROR(
                                "The storageTexture access mode of the bind group layout entry is "
                                "different from " +
                                GetShaderDeclarationString(group, bindingNumber));
                        }

                        if (layoutInfo.storageTexture.format != shaderInfo.storageTexture.format) {
                            return DAWN_VALIDATION_ERROR(
                                "The storageTexture format of the bind group layout entry is "
                                "different from " +
                                GetShaderDeclarationString(group, bindingNumber));
                        }
                        if (layoutInfo.storageTexture.viewDimension !=
                            shaderInfo.storageTexture.viewDimension) {
                            return DAWN_VALIDATION_ERROR(
                                "The storageTexture viewDimension of the bind group layout entry "
                                "is different from " +
                                GetShaderDeclarationString(group, bindingNumber));
                        }
                        break;
                    }

                    case BindingInfoType::Buffer: {
                        // Binding mismatch between shader and bind group is invalid. For example, a
                        // writable binding in the shader with a readonly storage buffer in the bind
                        // group layout is invalid. However, a readonly binding in the shader with a
                        // writable storage buffer in the bind group layout is valid.
                        bool validBindingConversion =
                            layoutInfo.buffer.type == wgpu::BufferBindingType::Storage &&
                            shaderInfo.buffer.type == wgpu::BufferBindingType::ReadOnlyStorage;

                        if (layoutInfo.buffer.type != shaderInfo.buffer.type &&
                            !validBindingConversion) {
                            return DAWN_VALIDATION_ERROR(
                                "The buffer type of the bind group layout entry conflicts " +
                                GetShaderDeclarationString(group, bindingNumber));
                        }

                        if (layoutInfo.buffer.minBindingSize != 0 &&
                            shaderInfo.buffer.minBindingSize > layoutInfo.buffer.minBindingSize) {
                            return DAWN_VALIDATION_ERROR(
                                "The minimum buffer size of the bind group layout entry is smaller "
                                "than " +
                                GetShaderDeclarationString(group, bindingNumber));
                        }
                        break;
                    }

                    case BindingInfoType::Sampler:
                        // TODO(crbug.com/dawn/367): Temporarily allow using either a sampler or a
                        // comparison sampler until we can perform the proper shader analysis of
                        // what type is used in the shader module.
                        break;
                }
            }

            return {};
        }

        ResultOrError<std::unique_ptr<EntryPointMetadata>> ExtractSpirvInfo(
            const DeviceBase* device,
            const spirv_cross::Compiler& compiler,
            const std::string& entryPointName,
            SingleShaderStage stage) {
            std::unique_ptr<EntryPointMetadata> metadata = std::make_unique<EntryPointMetadata>();
            metadata->stage = stage;

            // TODO(cwallez@chromium.org): make errors here creation errors
            // currently errors here do not prevent the shadermodule from being used
            const auto& resources = compiler.get_shader_resources();

            if (resources.push_constant_buffers.size() > 0) {
                return DAWN_VALIDATION_ERROR("Push constants aren't supported.");
            }

            if (resources.sampled_images.size() > 0) {
                return DAWN_VALIDATION_ERROR("Combined images and samplers aren't supported.");
            }

            // Fill in bindingInfo with the SPIRV bindings
            auto ExtractResourcesBinding =
                [](const DeviceBase* device,
                   const spirv_cross::SmallVector<spirv_cross::Resource>& resources,
                   const spirv_cross::Compiler& compiler, BindingInfoType bindingType,
                   EntryPointMetadata::BindingInfo* metadataBindings,
                   bool isStorageBuffer = false) -> MaybeError {
                for (const auto& resource : resources) {
                    if (!compiler.get_decoration_bitset(resource.id).get(spv::DecorationBinding)) {
                        return DAWN_VALIDATION_ERROR("No Binding decoration set for resource");
                    }

                    if (!compiler.get_decoration_bitset(resource.id)
                             .get(spv::DecorationDescriptorSet)) {
                        return DAWN_VALIDATION_ERROR("No Descriptor Decoration set for resource");
                    }

                    BindingNumber bindingNumber(
                        compiler.get_decoration(resource.id, spv::DecorationBinding));
                    BindGroupIndex bindGroupIndex(
                        compiler.get_decoration(resource.id, spv::DecorationDescriptorSet));

                    if (bindGroupIndex >= kMaxBindGroupsTyped) {
                        return DAWN_VALIDATION_ERROR("Bind group index over limits in the SPIRV");
                    }

                    const auto& it = (*metadataBindings)[bindGroupIndex].emplace(
                        bindingNumber, EntryPointMetadata::ShaderBindingInfo{});
                    if (!it.second) {
                        return DAWN_VALIDATION_ERROR("Shader has duplicate bindings");
                    }

                    EntryPointMetadata::ShaderBindingInfo* info = &it.first->second;
                    info->id = resource.id;
                    info->base_type_id = resource.base_type_id;
                    info->bindingType = bindingType;

                    switch (bindingType) {
                        case BindingInfoType::Texture: {
                            spirv_cross::SPIRType::ImageType imageType =
                                compiler.get_type(info->base_type_id).image;
                            spirv_cross::SPIRType::BaseType textureComponentType =
                                compiler.get_type(imageType.type).basetype;

                            info->texture.viewDimension =
                                SpirvDimToTextureViewDimension(imageType.dim, imageType.arrayed);
                            info->texture.sampleType =
                                SpirvBaseTypeToTextureSampleType(textureComponentType);
                            info->texture.multisampled = imageType.ms;

                            if (imageType.depth) {
                                if (imageType.ms) {
                                    return DAWN_VALIDATION_ERROR(
                                        "Multisampled depth textures aren't supported");
                                }
                                if (info->texture.sampleType != wgpu::TextureSampleType::Float) {
                                    return DAWN_VALIDATION_ERROR(
                                        "Depth textures must have a float type");
                                }
                                info->texture.sampleType = wgpu::TextureSampleType::Depth;
                            }
                            break;
                        }
                        case BindingInfoType::Buffer: {
                            // Determine buffer size, with a minimum of 1 element in the runtime
                            // array
                            spirv_cross::SPIRType type = compiler.get_type(info->base_type_id);
                            info->buffer.minBindingSize =
                                compiler.get_declared_struct_size_runtime_array(type, 1);

                            // Differentiate between readonly storage bindings and writable ones
                            // based on the NonWritable decoration.
                            // TODO(dawn:527): Could isStorageBuffer be determined by calling
                            // compiler.get_storage_class(resource.id)?
                            if (isStorageBuffer) {
                                spirv_cross::Bitset flags =
                                    compiler.get_buffer_block_flags(resource.id);
                                if (flags.get(spv::DecorationNonWritable)) {
                                    info->buffer.type = wgpu::BufferBindingType::ReadOnlyStorage;
                                } else {
                                    info->buffer.type = wgpu::BufferBindingType::Storage;
                                }
                            } else {
                                info->buffer.type = wgpu::BufferBindingType::Uniform;
                            }
                            break;
                        }
                        case BindingInfoType::StorageTexture: {
                            spirv_cross::Bitset flags = compiler.get_decoration_bitset(resource.id);
                            if (flags.get(spv::DecorationNonReadable)) {
                                info->storageTexture.access = wgpu::StorageTextureAccess::WriteOnly;
                            } else if (flags.get(spv::DecorationNonWritable)) {
                                info->storageTexture.access = wgpu::StorageTextureAccess::ReadOnly;
                            } else {
                                return DAWN_VALIDATION_ERROR(
                                    "Read-write storage textures are not supported");
                            }

                            spirv_cross::SPIRType::ImageType imageType =
                                compiler.get_type(info->base_type_id).image;
                            wgpu::TextureFormat storageTextureFormat =
                                SpirvImageFormatToTextureFormat(imageType.format);
                            if (storageTextureFormat == wgpu::TextureFormat::Undefined) {
                                return DAWN_VALIDATION_ERROR(
                                    "Invalid image format declaration on storage image");
                            }
                            const Format& format =
                                device->GetValidInternalFormat(storageTextureFormat);
                            if (!format.supportsStorageUsage) {
                                return DAWN_VALIDATION_ERROR(
                                    "The storage texture format is not supported");
                            }
                            if (imageType.ms) {
                                return DAWN_VALIDATION_ERROR(
                                    "Multisampled storage textures aren't supported");
                            }
                            if (imageType.depth) {
                                return DAWN_VALIDATION_ERROR(
                                    "Depth storage textures aren't supported");
                            }
                            info->storageTexture.format = storageTextureFormat;
                            info->storageTexture.viewDimension =
                                SpirvDimToTextureViewDimension(imageType.dim, imageType.arrayed);
                            break;
                        }
                        case BindingInfoType::Sampler: {
                            info->sampler.type = wgpu::SamplerBindingType::Filtering;
                        }
                    }
                }
                return {};
            };

            DAWN_TRY(ExtractResourcesBinding(device, resources.uniform_buffers, compiler,
                                             BindingInfoType::Buffer, &metadata->bindings));
            DAWN_TRY(ExtractResourcesBinding(device, resources.separate_images, compiler,
                                             BindingInfoType::Texture, &metadata->bindings));
            DAWN_TRY(ExtractResourcesBinding(device, resources.separate_samplers, compiler,
                                             BindingInfoType::Sampler, &metadata->bindings));
            DAWN_TRY(ExtractResourcesBinding(device, resources.storage_buffers, compiler,
                                             BindingInfoType::Buffer, &metadata->bindings, true));
            // ReadonlyStorageTexture is used as a tag to do general storage texture handling.
            DAWN_TRY(ExtractResourcesBinding(device, resources.storage_images, compiler,
                                             BindingInfoType::StorageTexture, &metadata->bindings));

            // Extract the vertex attributes
            if (stage == SingleShaderStage::Vertex) {
                for (const auto& attrib : resources.stage_inputs) {
                    if (!(compiler.get_decoration_bitset(attrib.id).get(spv::DecorationLocation))) {
                        return DAWN_VALIDATION_ERROR(
                            "Unable to find Location decoration for Vertex input");
                    }
                    uint32_t location = compiler.get_decoration(attrib.id, spv::DecorationLocation);

                    if (location >= kMaxVertexAttributes) {
                        return DAWN_VALIDATION_ERROR("Attribute location over limits in the SPIRV");
                    }

                    metadata->usedVertexAttributes.set(location);
                }

                // Without a location qualifier on vertex outputs, spirv_cross::CompilerMSL gives
                // them all the location 0, causing a compile error.
                for (const auto& attrib : resources.stage_outputs) {
                    if (!compiler.get_decoration_bitset(attrib.id).get(spv::DecorationLocation)) {
                        return DAWN_VALIDATION_ERROR("Need location qualifier on vertex output");
                    }
                }
            }

            if (stage == SingleShaderStage::Fragment) {
                // Without a location qualifier on vertex inputs, spirv_cross::CompilerMSL gives
                // them all the location 0, causing a compile error.
                for (const auto& attrib : resources.stage_inputs) {
                    if (!compiler.get_decoration_bitset(attrib.id).get(spv::DecorationLocation)) {
                        return DAWN_VALIDATION_ERROR("Need location qualifier on fragment input");
                    }
                }

                for (const auto& fragmentOutput : resources.stage_outputs) {
                    if (!compiler.get_decoration_bitset(fragmentOutput.id)
                             .get(spv::DecorationLocation)) {
                        return DAWN_VALIDATION_ERROR(
                            "Unable to find Location decoration for Fragment output");
                    }
                    uint32_t unsanitizedAttachment =
                        compiler.get_decoration(fragmentOutput.id, spv::DecorationLocation);
                    if (unsanitizedAttachment >= kMaxColorAttachments) {
                        return DAWN_VALIDATION_ERROR(
                            "Fragment output attachment index must be less than max number of "
                            "color "
                            "attachments");
                    }
                    ColorAttachmentIndex attachment(static_cast<uint8_t>(unsanitizedAttachment));

                    spirv_cross::SPIRType::BaseType shaderFragmentOutputBaseType =
                        compiler.get_type(fragmentOutput.base_type_id).basetype;
                    metadata->fragmentOutputFormatBaseTypes[attachment] =
                        SpirvBaseTypeToTextureComponentType(shaderFragmentOutputBaseType);
                    metadata->fragmentOutputsWritten.set(attachment);
                }
            }

            if (stage == SingleShaderStage::Compute) {
                const spirv_cross::SPIREntryPoint& spirEntryPoint =
                    compiler.get_entry_point(entryPointName, spv::ExecutionModelGLCompute);
                metadata->localWorkgroupSize.x = spirEntryPoint.workgroup_size.x;
                metadata->localWorkgroupSize.y = spirEntryPoint.workgroup_size.y;
                metadata->localWorkgroupSize.z = spirEntryPoint.workgroup_size.z;
            }

            return {std::move(metadata)};
        }

#ifdef DAWN_ENABLE_WGSL
        // Currently only partially populated the reflection data, needs to be
        // completed using PopulateMetadataUsingSPIRVCross. In the future, once
        // this function is complete, ReflectShaderUsingSPIRVCross and
        // PopulateMetadataUsingSPIRVCross will be removed.
        ResultOrError<EntryPointMetadataTable> ReflectShaderUsingTint(
            DeviceBase* device,
            const tint::ast::Module& module) {
            ASSERT(module.IsValid());

            EntryPointMetadataTable result;
            std::ostringstream errorStream;
            errorStream << "Tint Reflection failure:" << std::endl;

            tint::inspector::Inspector inspector(module);
            auto entryPoints = inspector.GetEntryPoints();
            if (inspector.has_error()) {
                errorStream << "Inspector: " << inspector.error() << std::endl;
                return DAWN_VALIDATION_ERROR(errorStream.str().c_str());
            }

            for (auto& entryPoint : entryPoints) {
                ASSERT(result.count(entryPoint.name) == 0);

                auto metadata = std::make_unique<EntryPointMetadata>();
                metadata->stage = PipelineStateToShaderStage(entryPoint.stage);
                metadata->localWorkgroupSize.x = entryPoint.workgroup_size_x;
                metadata->localWorkgroupSize.y = entryPoint.workgroup_size_y;
                metadata->localWorkgroupSize.z = entryPoint.workgroup_size_z;

                result[entryPoint.name] = std::move(metadata);
            }
            return std::move(result);
        }
#endif  // DAWN_ENABLE_WGSL

        // Uses SPIRV-Cross, which is planned for removal, but until
        // ReflectShaderUsingTint is completed, will be kept as a
        // fallback/source of truth.
        ResultOrError<EntryPointMetadataTable> ReflectShaderUsingSPIRVCross(
            DeviceBase* device,
            std::vector<uint32_t> spirv) {
            EntryPointMetadataTable result;
            spirv_cross::Compiler compiler(spirv);
            for (const spirv_cross::EntryPoint& entryPoint :
                 compiler.get_entry_points_and_stages()) {
                ASSERT(result.count(entryPoint.name) == 0);

                SingleShaderStage stage = ExecutionModelToShaderStage(entryPoint.execution_model);
                compiler.set_entry_point(entryPoint.name, entryPoint.execution_model);

                std::unique_ptr<EntryPointMetadata> metadata;
                DAWN_TRY_ASSIGN(metadata,
                                ExtractSpirvInfo(device, compiler, entryPoint.name, stage));
                result[entryPoint.name] = std::move(metadata);
            }
            return std::move(result);
        }

#ifdef DAWN_ENABLE_WGSL
        // Temporary utility method that allows for polyfilling like behaviour,
        // specifically data missing from the Tint implementation is filled in
        // using the SPIRV-Cross implementation. Once the Tint implementation is
        // completed, this function will be removed.
        MaybeError PopulateMetadataUsingSPIRVCross(DeviceBase* device,
                                                   std::vector<uint32_t> spirv,
                                                   EntryPointMetadataTable* tintTable) {
            EntryPointMetadataTable crossTable;
            DAWN_TRY_ASSIGN(crossTable, ReflectShaderUsingSPIRVCross(device, spirv));
            if (tintTable->size() != crossTable.size()) {
                return DAWN_VALIDATION_ERROR(
                    "Tint and SPIRV-Cross returned different number of entry points");
            }
            for (auto& crossMember : crossTable) {
                auto& name = crossMember.first;
                auto& crossEntry = crossMember.second;

                auto tintMember = tintTable->find(name);
                if (tintMember == tintTable->end()) {
                    return DAWN_VALIDATION_ERROR(
                        "Tint and SPIRV-Cross returned different entry point names");
                }

                auto& tintEntry = tintMember->second;
                if (tintEntry->stage != crossEntry->stage) {
                    return DAWN_VALIDATION_ERROR(
                        "Tint and SPIRV-Cross returned different stages for entry point");
                }

                if (tintEntry->localWorkgroupSize.x != tintEntry->localWorkgroupSize.x ||
                    tintEntry->localWorkgroupSize.y != tintEntry->localWorkgroupSize.y ||
                    tintEntry->localWorkgroupSize.z != tintEntry->localWorkgroupSize.z) {
                    return DAWN_VALIDATION_ERROR(
                        "Tint and SPIRV-Cross returned different values for local workgroup size");
                }

                // TODO(rharrison): Use the Inspector to get this data.
                tintEntry->bindings = crossEntry->bindings;
                tintEntry->usedVertexAttributes = crossEntry->usedVertexAttributes;
                tintEntry->fragmentOutputFormatBaseTypes =
                    crossEntry->fragmentOutputFormatBaseTypes;
                tintEntry->fragmentOutputsWritten = crossEntry->fragmentOutputsWritten;
            }
            return {};
        }
#endif  // DAWN_ENABLE_WGSL

    }  // anonymous namespace

    ShaderModuleParseResult::ShaderModuleParseResult() = default;
    ShaderModuleParseResult::~ShaderModuleParseResult() = default;

    ShaderModuleParseResult::ShaderModuleParseResult(ShaderModuleParseResult&& rhs) = default;

    ShaderModuleParseResult& ShaderModuleParseResult::operator=(ShaderModuleParseResult&& rhs) =
        default;

    ResultOrError<ShaderModuleParseResult> ValidateShaderModuleDescriptor(
        DeviceBase* device,
        const ShaderModuleDescriptor* descriptor) {
        const ChainedStruct* chainedDescriptor = descriptor->nextInChain;
        if (chainedDescriptor == nullptr) {
            return DAWN_VALIDATION_ERROR("Shader module descriptor missing chained descriptor");
        }
        // For now only a single SPIRV or WGSL subdescriptor is allowed.
        if (chainedDescriptor->nextInChain != nullptr) {
            return DAWN_VALIDATION_ERROR(
                "Shader module descriptor chained nextInChain must be nullptr");
        }

        ShaderModuleParseResult parseResult = {};
        switch (chainedDescriptor->sType) {
            case wgpu::SType::ShaderModuleSPIRVDescriptor: {
                const auto* spirvDesc =
                    static_cast<const ShaderModuleSPIRVDescriptor*>(chainedDescriptor);
                std::vector<uint32_t> spirv(spirvDesc->code, spirvDesc->code + spirvDesc->codeSize);
                if (device->IsToggleEnabled(Toggle::UseTintGenerator)) {
#ifdef DAWN_ENABLE_WGSL
                    tint::ast::Module module;
                    DAWN_TRY_ASSIGN(module, ParseSPIRV(spirv));
                    if (device->IsValidationEnabled()) {
                        DAWN_TRY(ValidateModule(&module));
                    }
                    parseResult.tintModule = std::make_unique<tint::ast::Module>(std::move(module));
#else
                    return DAWN_VALIDATION_ERROR("Using Tint is not enabled in this build.");
#endif  // DAWN_ENABLE_WGSL
                } else {
                    if (device->IsValidationEnabled()) {
                        DAWN_TRY(ValidateSpirv(spirv.data(), spirv.size()));
                    }
                    parseResult.spirv = std::move(spirv);
                }
                break;
            }

            case wgpu::SType::ShaderModuleWGSLDescriptor: {
#ifdef DAWN_ENABLE_WGSL
                const auto* wgslDesc =
                    static_cast<const ShaderModuleWGSLDescriptor*>(chainedDescriptor);

                tint::Source::File file("", wgslDesc->source);

                if (device->IsToggleEnabled(Toggle::UseTintGenerator)) {
                    tint::ast::Module module;
                    DAWN_TRY_ASSIGN(module, ParseWGSL(&file));
                    if (device->IsValidationEnabled()) {
                        DAWN_TRY(ValidateModule(&module));
                    }
                    parseResult.tintModule = std::make_unique<tint::ast::Module>(std::move(module));
                } else {
                    tint::ast::Module module;
                    DAWN_TRY_ASSIGN(module, ParseWGSL(&file));

                    {
                        tint::transform::Manager transformManager;
                        transformManager.append(
                            std::make_unique<tint::transform::EmitVertexPointSize>());
                        DAWN_TRY_ASSIGN(module, RunTransforms(&transformManager, &module));
                    }

                    if (device->IsValidationEnabled()) {
                        DAWN_TRY(ValidateModule(&module));
                    }

                    // Keep the Tint module around. The Metal backend will use it for vertex
                    // pulling since we can't go WGSL->point size transform->spirv->Tint.
                    // Tint's spirv reader doesn't understand point size. crbug.com/tint/412.
                    auto tintModule = std::make_unique<tint::ast::Module>(module.Clone());

                    std::vector<uint32_t> spirv;
                    DAWN_TRY_ASSIGN(spirv, ModuleToSPIRV(std::move(module)));
                    DAWN_TRY(ValidateSpirv(spirv.data(), spirv.size()));

                    parseResult.tintModule = std::move(tintModule);
                    parseResult.spirv = std::move(spirv);
                }
                break;
#else
                return DAWN_VALIDATION_ERROR("Using Tint is not enabled in this build.");
#endif  // DAWN_ENABLE_WGSL
            }
            default:
                return DAWN_VALIDATION_ERROR("Unsupported sType");
        }

        return std::move(parseResult);
    }

    RequiredBufferSizes ComputeRequiredBufferSizesForLayout(const EntryPointMetadata& entryPoint,
                                                            const PipelineLayoutBase* layout) {
        RequiredBufferSizes bufferSizes;
        for (BindGroupIndex group : IterateBitSet(layout->GetBindGroupLayoutsMask())) {
            bufferSizes[group] = GetBindGroupMinBufferSizes(entryPoint.bindings[group],
                                                            layout->GetBindGroupLayout(group));
        }

        return bufferSizes;
    }

#ifdef DAWN_ENABLE_WGSL
    ResultOrError<tint::ast::Module> RunTransforms(tint::transform::Manager* manager,
                                                   tint::ast::Module* module) {
        tint::transform::Transform::Output output = manager->Run(module);
        if (output.diagnostics.contains_errors()) {
            std::string err =
                "Tint transform failure: " + tint::diag::Formatter{}.format(output.diagnostics);
            return DAWN_VALIDATION_ERROR(err.c_str());
        }

        if (!output.module.IsValid()) {
            return DAWN_VALIDATION_ERROR("Tint transform did not produce valid module.");
        }
        return std::move(output.module);
    }

    std::unique_ptr<tint::transform::VertexPulling> MakeVertexPullingTransform(
        const VertexStateDescriptor& vertexState,
        const std::string& entryPoint,
        BindGroupIndex pullingBufferBindingSet) {
        auto transform = std::make_unique<tint::transform::VertexPulling>();
        tint::transform::VertexStateDescriptor state;
        for (uint32_t i = 0; i < vertexState.vertexBufferCount; ++i) {
            const auto& vertexBuffer = vertexState.vertexBuffers[i];
            tint::transform::VertexBufferLayoutDescriptor layout;
            layout.array_stride = vertexBuffer.arrayStride;
            layout.step_mode = ToTintInputStepMode(vertexBuffer.stepMode);

            for (uint32_t j = 0; j < vertexBuffer.attributeCount; ++j) {
                const auto& attribute = vertexBuffer.attributes[j];
                tint::transform::VertexAttributeDescriptor attr;
                attr.format = ToTintVertexFormat(attribute.format);
                attr.offset = attribute.offset;
                attr.shader_location = attribute.shaderLocation;

                layout.attributes.push_back(std::move(attr));
            }

            state.push_back(std::move(layout));
        }
        transform->SetVertexState(std::move(state));
        transform->SetEntryPoint(entryPoint);
        transform->SetPullingBufferBindingSet(static_cast<uint32_t>(pullingBufferBindingSet));
        return transform;
    }
#endif

    MaybeError ValidateCompatibilityWithPipelineLayout(DeviceBase* device,
                                                       const EntryPointMetadata& entryPoint,
                                                       const PipelineLayoutBase* layout) {
        for (BindGroupIndex group : IterateBitSet(layout->GetBindGroupLayoutsMask())) {
            DAWN_TRY(ValidateCompatibilityWithBindGroupLayout(device, group, entryPoint,
                                                              layout->GetBindGroupLayout(group)));
        }

        for (BindGroupIndex group : IterateBitSet(~layout->GetBindGroupLayoutsMask())) {
            if (entryPoint.bindings[group].size() > 0) {
                std::ostringstream ostream;
                ostream << "No bind group layout entry matches the declaration set "
                        << static_cast<uint32_t>(group) << " in the shader module";
                return DAWN_VALIDATION_ERROR(ostream.str());
            }
        }

        return {};
    }

    // ShaderModuleBase

    ShaderModuleBase::ShaderModuleBase(DeviceBase* device, const ShaderModuleDescriptor* descriptor)
        : CachedObject(device), mType(Type::Undefined) {
        ASSERT(descriptor->nextInChain != nullptr);
        switch (descriptor->nextInChain->sType) {
            case wgpu::SType::ShaderModuleSPIRVDescriptor: {
                mType = Type::Spirv;
                const auto* spirvDesc =
                    static_cast<const ShaderModuleSPIRVDescriptor*>(descriptor->nextInChain);
                mOriginalSpirv.assign(spirvDesc->code, spirvDesc->code + spirvDesc->codeSize);
                break;
            }
            case wgpu::SType::ShaderModuleWGSLDescriptor: {
                mType = Type::Wgsl;
                const auto* wgslDesc =
                    static_cast<const ShaderModuleWGSLDescriptor*>(descriptor->nextInChain);
                mWgsl = std::string(wgslDesc->source);
                break;
            }
            default:
                UNREACHABLE();
        }
    }

    ShaderModuleBase::ShaderModuleBase(DeviceBase* device, ObjectBase::ErrorTag tag)
        : CachedObject(device, tag), mType(Type::Undefined) {
    }

    ShaderModuleBase::~ShaderModuleBase() {
        if (IsCachedReference()) {
            GetDevice()->UncacheShaderModule(this);
        }
    }

    // static
    ShaderModuleBase* ShaderModuleBase::MakeError(DeviceBase* device) {
        return new ShaderModuleBase(device, ObjectBase::kError);
    }

    bool ShaderModuleBase::HasEntryPoint(const std::string& entryPoint) const {
        return mEntryPoints.count(entryPoint) > 0;
    }

    const EntryPointMetadata& ShaderModuleBase::GetEntryPoint(const std::string& entryPoint) const {
        ASSERT(HasEntryPoint(entryPoint));
        return *mEntryPoints.at(entryPoint);
    }

    size_t ShaderModuleBase::ComputeContentHash() {
        ObjectContentHasher recorder;
        recorder.Record(mType);
        recorder.Record(mOriginalSpirv);
        recorder.Record(mWgsl);
        return recorder.GetContentHash();
    }

    bool ShaderModuleBase::EqualityFunc::operator()(const ShaderModuleBase* a,
                                                    const ShaderModuleBase* b) const {
        return a->mType == b->mType && a->mOriginalSpirv == b->mOriginalSpirv &&
               a->mWgsl == b->mWgsl;
    }

    const std::vector<uint32_t>& ShaderModuleBase::GetSpirv() const {
        ASSERT(!GetDevice()->IsToggleEnabled(Toggle::UseTintGenerator));
        return mSpirv;
    }

#ifdef DAWN_ENABLE_WGSL
    ResultOrError<std::vector<uint32_t>> ShaderModuleBase::GeneratePullingSpirv(
        const std::vector<uint32_t>& spirv,
        const VertexStateDescriptor& vertexState,
        const std::string& entryPoint,
        BindGroupIndex pullingBufferBindingSet) const {
        tint::ast::Module module;
        DAWN_TRY_ASSIGN(module, ParseSPIRV(spirv));

        return GeneratePullingSpirv(&module, vertexState, entryPoint, pullingBufferBindingSet);
    }

    ResultOrError<std::vector<uint32_t>> ShaderModuleBase::GeneratePullingSpirv(
        tint::ast::Module* moduleIn,
        const VertexStateDescriptor& vertexState,
        const std::string& entryPoint,
        BindGroupIndex pullingBufferBindingSet) const {
        std::ostringstream errorStream;
        errorStream << "Tint vertex pulling failure:" << std::endl;

        tint::transform::Manager transformManager;
        transformManager.append(
            MakeVertexPullingTransform(vertexState, entryPoint, pullingBufferBindingSet));
        transformManager.append(std::make_unique<tint::transform::EmitVertexPointSize>());
        if (GetDevice()->IsRobustnessEnabled()) {
            // TODO(enga): Run the Tint BoundArrayAccessors transform instead of the SPIRV Tools
            // one, but it appears to crash after running VertexPulling.
            // transformManager.append(std::make_unique<tint::transform::BoundArrayAccessors>());
        }

        tint::ast::Module module;
        DAWN_TRY_ASSIGN(module, RunTransforms(&transformManager, moduleIn));

        tint::writer::spirv::Generator generator(std::move(module));
        if (!generator.Generate()) {
            errorStream << "Generator: " << generator.error() << std::endl;
            return DAWN_VALIDATION_ERROR(errorStream.str().c_str());
        }

        std::vector<uint32_t> spirv = generator.result();
        if (GetDevice()->IsRobustnessEnabled()) {
            DAWN_TRY_ASSIGN(spirv, RunRobustBufferAccessPass(spirv));
        }
        DAWN_TRY(ValidateSpirv(spirv.data(), spirv.size()));
        return std::move(spirv);
    }
#endif

    MaybeError ShaderModuleBase::InitializeBase(ShaderModuleParseResult* parseResult) {
#ifdef DAWN_ENABLE_WGSL
        tint::ast::Module* module = parseResult->tintModule.get();
#endif
        mSpirv = std::move(parseResult->spirv);

        // If not using Tint to generate backend code, run the robust buffer access pass now since
        // all backends will use this SPIR-V. If Tint is used, the robustness pass should be run
        // per-backend.
        if (!GetDevice()->IsToggleEnabled(Toggle::UseTintGenerator) &&
            GetDevice()->IsRobustnessEnabled()) {
            DAWN_TRY_ASSIGN(mSpirv, RunRobustBufferAccessPass(mSpirv));
        }

        // We still need the spirv for reflection. Remove this when we use the Tint inspector
        // completely.
        std::vector<uint32_t>* spirvPtr = &mSpirv;
        std::vector<uint32_t> localSpirv;
        if (GetDevice()->IsToggleEnabled(Toggle::UseTintGenerator)) {
#ifdef DAWN_ENABLE_WGSL
            ASSERT(module != nullptr);
            tint::ast::Module clonedModule = module->Clone();
            tint::TypeDeterminer typeDeterminer(&clonedModule);
            if (!typeDeterminer.Determine()) {
                return DAWN_VALIDATION_ERROR(typeDeterminer.error().c_str());
            }
            DAWN_TRY_ASSIGN(localSpirv, ModuleToSPIRV(std::move(clonedModule)));
            DAWN_TRY(ValidateSpirv(localSpirv.data(), localSpirv.size()));
            spirvPtr = &localSpirv;
#else
            UNREACHABLE();
#endif
        }

        if (GetDevice()->IsToggleEnabled(Toggle::UseTintInspector)) {
#ifdef DAWN_ENABLE_WGSL
            tint::ast::Module localModule;

            tint::ast::Module* modulePtr = module;
            if (!GetDevice()->IsToggleEnabled(Toggle::UseTintGenerator)) {
                // We have mSpirv, but no Tint module
                DAWN_TRY_ASSIGN(localModule, ParseSPIRV(mSpirv));
                DAWN_TRY(ValidateModule(&localModule));
                modulePtr = &localModule;
            }

            EntryPointMetadataTable table;
            DAWN_TRY_ASSIGN(table, ReflectShaderUsingTint(GetDevice(), *modulePtr));
            DAWN_TRY(PopulateMetadataUsingSPIRVCross(GetDevice(), *spirvPtr, &table));
            mEntryPoints = std::move(table);
#else
            return DAWN_VALIDATION_ERROR("Using Tint is not enabled in this build.");
#endif
        } else {
            DAWN_TRY_ASSIGN(mEntryPoints, ReflectShaderUsingSPIRVCross(GetDevice(), *spirvPtr));
        }

        return {};
    }
}  // namespace dawn_native