// Copyright 2018 The Dawn Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#include "tests/unittests/validation/ValidationTest.h"

namespace {

    class TextureViewValidationTest : public ValidationTest {};

    constexpr uint32_t kWidth = 32u;
    constexpr uint32_t kHeight = 32u;
    constexpr uint32_t kDepth = 6u;
    constexpr uint32_t kDefaultMipLevels = 6u;

    constexpr wgpu::TextureFormat kDefaultTextureFormat = wgpu::TextureFormat::RGBA8Unorm;

    wgpu::Texture Create2DArrayTexture(wgpu::Device& device,
                                       uint32_t arrayLayerCount,
                                       uint32_t width = kWidth,
                                       uint32_t height = kHeight,
                                       uint32_t mipLevelCount = kDefaultMipLevels,
                                       uint32_t sampleCount = 1) {
        wgpu::TextureDescriptor descriptor;
        descriptor.dimension = wgpu::TextureDimension::e2D;
        descriptor.size.width = width;
        descriptor.size.height = height;
        descriptor.size.depth = arrayLayerCount;
        descriptor.sampleCount = sampleCount;
        descriptor.format = kDefaultTextureFormat;
        descriptor.mipLevelCount = mipLevelCount;
        descriptor.usage = wgpu::TextureUsage::Sampled;
        return device.CreateTexture(&descriptor);
    }

    wgpu::Texture Create3DTexture(wgpu::Device& device) {
        wgpu::TextureDescriptor descriptor;
        descriptor.dimension = wgpu::TextureDimension::e3D;
        descriptor.size = {kWidth, kHeight, kDepth};
        descriptor.sampleCount = 1;
        descriptor.format = kDefaultTextureFormat;
        descriptor.mipLevelCount = kDefaultMipLevels;
        descriptor.usage = wgpu::TextureUsage::Sampled;
        return device.CreateTexture(&descriptor);
    }

    wgpu::TextureViewDescriptor CreateDefaultViewDescriptor(wgpu::TextureViewDimension dimension) {
        wgpu::TextureViewDescriptor descriptor;
        descriptor.format = kDefaultTextureFormat;
        descriptor.dimension = dimension;
        descriptor.baseMipLevel = 0;
        descriptor.mipLevelCount = kDefaultMipLevels;
        descriptor.baseArrayLayer = 0;
        descriptor.arrayLayerCount = 1;
        return descriptor;
    }

    // Test creating texture view on a 2D non-array texture
    TEST_F(TextureViewValidationTest, CreateTextureViewOnTexture2D) {
        wgpu::Texture texture = Create2DArrayTexture(device, 1);

        wgpu::TextureViewDescriptor base2DTextureViewDescriptor =
            CreateDefaultViewDescriptor(wgpu::TextureViewDimension::e2D);

        // It is OK to create a 2D texture view on a 2D texture.
        {
            wgpu::TextureViewDescriptor descriptor = base2DTextureViewDescriptor;
            descriptor.arrayLayerCount = 1;
            texture.CreateView(&descriptor);
        }

        // It is an error to view a layer past the end of the texture.
        {
            wgpu::TextureViewDescriptor descriptor = base2DTextureViewDescriptor;
            descriptor.arrayLayerCount = 2;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }

        // It is OK to create a 1-layer 2D array texture view on a 2D texture.
        {
            wgpu::TextureViewDescriptor descriptor = base2DTextureViewDescriptor;
            descriptor.dimension = wgpu::TextureViewDimension::e2DArray;
            descriptor.arrayLayerCount = 1;
            texture.CreateView(&descriptor);
        }

        // It is an error to create a 3D texture view on a 2D texture.
        {
            wgpu::TextureViewDescriptor descriptor = base2DTextureViewDescriptor;
            descriptor.dimension = wgpu::TextureViewDimension::e3D;
            descriptor.arrayLayerCount = 1;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }

        // baseMipLevel == k && mipLevelCount == 0 means to use levels k..end.
        {
            wgpu::TextureViewDescriptor descriptor = base2DTextureViewDescriptor;
            descriptor.mipLevelCount = 0;

            descriptor.baseMipLevel = 0;
            texture.CreateView(&descriptor);
            descriptor.baseMipLevel = 1;
            texture.CreateView(&descriptor);
            descriptor.baseMipLevel = kDefaultMipLevels - 1;
            texture.CreateView(&descriptor);
            descriptor.baseMipLevel = kDefaultMipLevels;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }

        // It is an error to make the mip level out of range.
        {
            wgpu::TextureViewDescriptor descriptor = base2DTextureViewDescriptor;
            descriptor.baseMipLevel = 0;
            descriptor.mipLevelCount = kDefaultMipLevels + 1;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
            descriptor.baseMipLevel = 1;
            descriptor.mipLevelCount = kDefaultMipLevels;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
            descriptor.baseMipLevel = kDefaultMipLevels - 1;
            descriptor.mipLevelCount = 2;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
            descriptor.baseMipLevel = kDefaultMipLevels;
            descriptor.mipLevelCount = 1;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }
    }

    // Test creating texture view on a 2D array texture
    TEST_F(TextureViewValidationTest, CreateTextureViewOnTexture2DArray) {
        constexpr uint32_t kDefaultArrayLayers = 6;

        wgpu::Texture texture = Create2DArrayTexture(device, kDefaultArrayLayers);

        wgpu::TextureViewDescriptor base2DArrayTextureViewDescriptor =
            CreateDefaultViewDescriptor(wgpu::TextureViewDimension::e2DArray);

        // It is OK to create a 2D texture view on a 2D array texture.
        {
            wgpu::TextureViewDescriptor descriptor = base2DArrayTextureViewDescriptor;
            descriptor.dimension = wgpu::TextureViewDimension::e2D;
            descriptor.arrayLayerCount = 1;
            texture.CreateView(&descriptor);
        }

        // It is OK to create a 2D array texture view on a 2D array texture.
        {
            wgpu::TextureViewDescriptor descriptor = base2DArrayTextureViewDescriptor;
            descriptor.arrayLayerCount = kDefaultArrayLayers;
            texture.CreateView(&descriptor);
        }

        // It is an error to create a 3D texture view on a 2D array texture.
        {
            wgpu::TextureViewDescriptor descriptor = base2DArrayTextureViewDescriptor;
            descriptor.dimension = wgpu::TextureViewDimension::e3D;
            descriptor.arrayLayerCount = 1;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }

        // baseArrayLayer == k && arrayLayerCount == 0 means to use layers k..end.
        {
            wgpu::TextureViewDescriptor descriptor = base2DArrayTextureViewDescriptor;
            descriptor.arrayLayerCount = 0;

            descriptor.baseArrayLayer = 0;
            texture.CreateView(&descriptor);
            descriptor.baseArrayLayer = 1;
            texture.CreateView(&descriptor);
            descriptor.baseArrayLayer = kDefaultArrayLayers - 1;
            texture.CreateView(&descriptor);
            descriptor.baseArrayLayer = kDefaultArrayLayers;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }

        // It is an error for the array layer range of the view to exceed that of the texture.
        {
            wgpu::TextureViewDescriptor descriptor = base2DArrayTextureViewDescriptor;
            descriptor.baseArrayLayer = 0;
            descriptor.arrayLayerCount = kDefaultArrayLayers + 1;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
            descriptor.baseArrayLayer = 1;
            descriptor.arrayLayerCount = kDefaultArrayLayers;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
            descriptor.baseArrayLayer = kDefaultArrayLayers - 1;
            descriptor.arrayLayerCount = 2;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
            descriptor.baseArrayLayer = kDefaultArrayLayers;
            descriptor.arrayLayerCount = 1;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }
    }

    // Test creating texture view on a 3D texture
    TEST_F(TextureViewValidationTest, CreateTextureViewOnTexture3D) {
        wgpu::Texture texture = Create3DTexture(device);

        wgpu::TextureViewDescriptor base3DTextureViewDescriptor =
            CreateDefaultViewDescriptor(wgpu::TextureViewDimension::e3D);

        // It is OK to create a 3D texture view on a 3D texture.
        {
            wgpu::TextureViewDescriptor descriptor = base3DTextureViewDescriptor;
            texture.CreateView(&descriptor);
        }

        // It is an error to create a 2D/2DArray/Cube/CubeArray texture view on a 3D texture.
        {
            wgpu::TextureViewDimension invalidDimensions[] = {
                wgpu::TextureViewDimension::e2D,
                wgpu::TextureViewDimension::e2DArray,
                wgpu::TextureViewDimension::Cube,
                wgpu::TextureViewDimension::CubeArray,
            };
            for (wgpu::TextureViewDimension dimension : invalidDimensions) {
                wgpu::TextureViewDescriptor descriptor = base3DTextureViewDescriptor;
                descriptor.dimension = dimension;
                if (dimension == wgpu::TextureViewDimension::Cube ||
                    dimension == wgpu::TextureViewDimension::CubeArray) {
                    descriptor.arrayLayerCount = 6;
                }
                ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
            }
        }

        // baseMipLevel == k && mipLevelCount == 0 means to use levels k..end.
        {
            wgpu::TextureViewDescriptor descriptor = base3DTextureViewDescriptor;
            descriptor.mipLevelCount = 0;

            descriptor.baseMipLevel = 0;
            texture.CreateView(&descriptor);
            descriptor.baseMipLevel = 1;
            texture.CreateView(&descriptor);
            descriptor.baseMipLevel = kDefaultMipLevels - 1;
            texture.CreateView(&descriptor);
            descriptor.baseMipLevel = kDefaultMipLevels;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }

        // It is an error to make the mip level out of range.
        {
            wgpu::TextureViewDescriptor descriptor = base3DTextureViewDescriptor;
            descriptor.baseMipLevel = 0;
            descriptor.mipLevelCount = kDefaultMipLevels + 1;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
            descriptor.baseMipLevel = 1;
            descriptor.mipLevelCount = kDefaultMipLevels;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
            descriptor.baseMipLevel = kDefaultMipLevels - 1;
            descriptor.mipLevelCount = 2;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
            descriptor.baseMipLevel = kDefaultMipLevels;
            descriptor.mipLevelCount = 1;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }

        // baseArrayLayer == k && arrayLayerCount == 0 means to use layers k..end. But
        // baseArrayLayer must be 0, and arrayLayerCount must be 1 at most for 3D texture view.
        {
            wgpu::TextureViewDescriptor descriptor = base3DTextureViewDescriptor;
            descriptor.arrayLayerCount = 0;
            descriptor.baseArrayLayer = 0;
            texture.CreateView(&descriptor);
            descriptor.baseArrayLayer = 1;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));

            descriptor.baseArrayLayer = 0;
            descriptor.arrayLayerCount = 1;
            texture.CreateView(&descriptor);
            descriptor.arrayLayerCount = 2;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
            descriptor.arrayLayerCount = kDepth;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }
    }

    // Using the "none" ("default") values validates the same as explicitly
    // specifying the values they're supposed to default to.
    // Variant for a 2D texture with more than 1 array layer.
    TEST_F(TextureViewValidationTest, TextureViewDescriptorDefaults2DArray) {
        constexpr uint32_t kDefaultArrayLayers = 6;
        wgpu::Texture texture = Create2DArrayTexture(device, kDefaultArrayLayers);

        { texture.CreateView(); }
        {
            wgpu::TextureViewDescriptor descriptor;
            descriptor.format = wgpu::TextureFormat::Undefined;
            texture.CreateView(&descriptor);
            descriptor.format = wgpu::TextureFormat::RGBA8Unorm;
            texture.CreateView(&descriptor);
            descriptor.format = wgpu::TextureFormat::R8Unorm;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }
        {
            wgpu::TextureViewDescriptor descriptor;
            descriptor.dimension = wgpu::TextureViewDimension::Undefined;
            texture.CreateView(&descriptor);
            descriptor.dimension = wgpu::TextureViewDimension::e2DArray;
            texture.CreateView(&descriptor);
            descriptor.dimension = wgpu::TextureViewDimension::e2D;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }
        {
            wgpu::TextureViewDescriptor descriptor;

            // Setting array layers to non-0 means the dimensionality will
            // default to 2D so by itself it causes an error.
            descriptor.arrayLayerCount = kDefaultArrayLayers;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
            descriptor.dimension = wgpu::TextureViewDimension::e2DArray;
            texture.CreateView(&descriptor);

            descriptor.mipLevelCount = kDefaultMipLevels;
            texture.CreateView(&descriptor);
        }
    }

    // Using the "none" ("default") values validates the same as explicitly
    // specifying the values they're supposed to default to.
    // Variant for a 2D texture with only 1 array layer.
    TEST_F(TextureViewValidationTest, TextureViewDescriptorDefaults2DNonArray) {
        constexpr uint32_t kDefaultArrayLayers = 1;
        wgpu::Texture texture = Create2DArrayTexture(device, kDefaultArrayLayers);

        { texture.CreateView(); }
        {
            wgpu::TextureViewDescriptor descriptor;
            descriptor.format = wgpu::TextureFormat::Undefined;
            texture.CreateView(&descriptor);
            descriptor.format = wgpu::TextureFormat::RGBA8Unorm;
            texture.CreateView(&descriptor);
            descriptor.format = wgpu::TextureFormat::R8Unorm;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }
        {
            wgpu::TextureViewDescriptor descriptor;
            descriptor.dimension = wgpu::TextureViewDimension::Undefined;
            texture.CreateView(&descriptor);
            descriptor.dimension = wgpu::TextureViewDimension::e2D;
            texture.CreateView(&descriptor);
            descriptor.dimension = wgpu::TextureViewDimension::e2DArray;
            texture.CreateView(&descriptor);
        }
        {
            wgpu::TextureViewDescriptor descriptor;
            descriptor.arrayLayerCount = 0;
            texture.CreateView(&descriptor);
            descriptor.arrayLayerCount = 1;
            texture.CreateView(&descriptor);
            descriptor.arrayLayerCount = 2;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }
        {
            wgpu::TextureViewDescriptor descriptor;
            descriptor.mipLevelCount = kDefaultMipLevels;
            texture.CreateView(&descriptor);
            descriptor.arrayLayerCount = kDefaultArrayLayers;
            texture.CreateView(&descriptor);
        }
    }

    // Using the "none" ("default") values validates the same as explicitly
    // specifying the values they're supposed to default to.
    // Variant for a 3D texture.
    TEST_F(TextureViewValidationTest, TextureViewDescriptorDefaults3D) {
        wgpu::Texture texture = Create3DTexture(device);

        { texture.CreateView(); }
        {
            wgpu::TextureViewDescriptor descriptor;
            descriptor.format = wgpu::TextureFormat::Undefined;
            texture.CreateView(&descriptor);
            descriptor.format = wgpu::TextureFormat::RGBA8Unorm;
            texture.CreateView(&descriptor);
            descriptor.format = wgpu::TextureFormat::R8Unorm;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }
        {
            wgpu::TextureViewDescriptor descriptor;
            descriptor.dimension = wgpu::TextureViewDimension::Undefined;
            texture.CreateView(&descriptor);
            descriptor.dimension = wgpu::TextureViewDimension::e3D;
            texture.CreateView(&descriptor);
            descriptor.dimension = wgpu::TextureViewDimension::e2DArray;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
            descriptor.dimension = wgpu::TextureViewDimension::e2D;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }
        {
            wgpu::TextureViewDescriptor descriptor;
            descriptor.arrayLayerCount = 0;
            texture.CreateView(&descriptor);
            descriptor.arrayLayerCount = 1;
            texture.CreateView(&descriptor);
            descriptor.arrayLayerCount = 2;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }
        {
            wgpu::TextureViewDescriptor descriptor;
            descriptor.mipLevelCount = kDefaultMipLevels;
            texture.CreateView(&descriptor);
            descriptor.arrayLayerCount = kDepth;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }
    }

    // Test creating cube map texture view
    TEST_F(TextureViewValidationTest, CreateCubeMapTextureView) {
        constexpr uint32_t kDefaultArrayLayers = 16;

        wgpu::Texture texture = Create2DArrayTexture(device, kDefaultArrayLayers);

        wgpu::TextureViewDescriptor base2DArrayTextureViewDescriptor =
            CreateDefaultViewDescriptor(wgpu::TextureViewDimension::e2DArray);

        // It is OK to create a cube map texture view with arrayLayerCount == 6.
        {
            wgpu::TextureViewDescriptor descriptor = base2DArrayTextureViewDescriptor;
            descriptor.dimension = wgpu::TextureViewDimension::Cube;
            descriptor.arrayLayerCount = 6;
            texture.CreateView(&descriptor);
        }

        // It is an error to create a cube map texture view with arrayLayerCount != 6.
        {
            wgpu::TextureViewDescriptor descriptor = base2DArrayTextureViewDescriptor;
            descriptor.dimension = wgpu::TextureViewDimension::Cube;
            descriptor.arrayLayerCount = 3;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }

        // It is OK to create a cube map array texture view with arrayLayerCount % 6 == 0.
        {
            wgpu::TextureViewDescriptor descriptor = base2DArrayTextureViewDescriptor;
            descriptor.dimension = wgpu::TextureViewDimension::CubeArray;
            descriptor.arrayLayerCount = 12;
            texture.CreateView(&descriptor);
        }

        // It is an error to create a cube map array texture view with arrayLayerCount % 6 != 0.
        {
            wgpu::TextureViewDescriptor descriptor = base2DArrayTextureViewDescriptor;
            descriptor.dimension = wgpu::TextureViewDimension::CubeArray;
            descriptor.arrayLayerCount = 11;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }

        // It is an error to create a cube map texture view with width != height.
        {
            wgpu::Texture nonSquareTexture = Create2DArrayTexture(device, 18, 32, 16, 5);

            wgpu::TextureViewDescriptor descriptor = base2DArrayTextureViewDescriptor;
            descriptor.dimension = wgpu::TextureViewDimension::Cube;
            descriptor.arrayLayerCount = 6;
            ASSERT_DEVICE_ERROR(nonSquareTexture.CreateView(&descriptor));
        }

        // It is an error to create a cube map array texture view with width != height.
        {
            wgpu::Texture nonSquareTexture = Create2DArrayTexture(device, 18, 32, 16, 5);

            wgpu::TextureViewDescriptor descriptor = base2DArrayTextureViewDescriptor;
            descriptor.dimension = wgpu::TextureViewDimension::CubeArray;
            descriptor.arrayLayerCount = 12;
            ASSERT_DEVICE_ERROR(nonSquareTexture.CreateView(&descriptor));
        }
    }

    // Test the format compatibility rules when creating a texture view.
    // TODO(jiawei.shao@intel.com): add more tests when the rules are fully implemented.
    TEST_F(TextureViewValidationTest, TextureViewFormatCompatibility) {
        wgpu::Texture texture = Create2DArrayTexture(device, 1);

        wgpu::TextureViewDescriptor base2DTextureViewDescriptor =
            CreateDefaultViewDescriptor(wgpu::TextureViewDimension::e2D);

        // It is an error to create a texture view in depth-stencil format on a RGBA texture.
        {
            wgpu::TextureViewDescriptor descriptor = base2DTextureViewDescriptor;
            descriptor.format = wgpu::TextureFormat::Depth24PlusStencil8;
            ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
        }
    }

    // Test that it's invalid to create a texture view from a destroyed texture
    TEST_F(TextureViewValidationTest, DestroyCreateTextureView) {
        wgpu::Texture texture = Create2DArrayTexture(device, 1);
        wgpu::TextureViewDescriptor descriptor =
            CreateDefaultViewDescriptor(wgpu::TextureViewDimension::e2D);
        texture.Destroy();
        ASSERT_DEVICE_ERROR(texture.CreateView(&descriptor));
    }

    // Test that the selected TextureAspects must exist in the texture format
    TEST_F(TextureViewValidationTest, AspectMustExist) {
        wgpu::TextureDescriptor descriptor = {};
        descriptor.size = {1, 1, 1};
        descriptor.usage = wgpu::TextureUsage::Sampled | wgpu::TextureUsage::RenderAttachment;

        // Can select: All and DepthOnly from Depth32Float, but not StencilOnly
        {
            descriptor.format = wgpu::TextureFormat::Depth32Float;
            wgpu::Texture texture = device.CreateTexture(&descriptor);

            wgpu::TextureViewDescriptor viewDescriptor = {};
            viewDescriptor.aspect = wgpu::TextureAspect::All;
            texture.CreateView(&viewDescriptor);

            viewDescriptor.aspect = wgpu::TextureAspect::DepthOnly;
            texture.CreateView(&viewDescriptor);

            viewDescriptor.aspect = wgpu::TextureAspect::StencilOnly;
            ASSERT_DEVICE_ERROR(texture.CreateView(&viewDescriptor));
        }

        // Can select: All, DepthOnly, and StencilOnly from Depth24PlusStencil8
        {
            descriptor.format = wgpu::TextureFormat::Depth24PlusStencil8;
            wgpu::Texture texture = device.CreateTexture(&descriptor);

            wgpu::TextureViewDescriptor viewDescriptor = {};
            viewDescriptor.aspect = wgpu::TextureAspect::All;
            texture.CreateView(&viewDescriptor);

            viewDescriptor.aspect = wgpu::TextureAspect::DepthOnly;
            texture.CreateView(&viewDescriptor);

            viewDescriptor.aspect = wgpu::TextureAspect::StencilOnly;
            texture.CreateView(&viewDescriptor);
        }

        // Can select: All from RGBA8Unorm
        {
            descriptor.format = wgpu::TextureFormat::RGBA8Unorm;
            wgpu::Texture texture = device.CreateTexture(&descriptor);

            wgpu::TextureViewDescriptor viewDescriptor = {};
            viewDescriptor.aspect = wgpu::TextureAspect::All;
            texture.CreateView(&viewDescriptor);

            viewDescriptor.aspect = wgpu::TextureAspect::DepthOnly;
            ASSERT_DEVICE_ERROR(texture.CreateView(&viewDescriptor));

            viewDescriptor.aspect = wgpu::TextureAspect::StencilOnly;
            ASSERT_DEVICE_ERROR(texture.CreateView(&viewDescriptor));
        }
    }

}  // anonymous namespace