// Copyright 2018 The Dawn Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#include "dawn/tests/unittests/validation/ValidationTest.h"

#include "dawn/utils/ComboRenderPipelineDescriptor.h"
#include "dawn/utils/WGPUHelpers.h"

namespace {

class QueueSubmitValidationTest : public ValidationTest {};

// Test submitting with a mapped buffer is disallowed
TEST_F(QueueSubmitValidationTest, SubmitWithMappedBuffer) {
    // Create a map-write buffer.
    const uint64_t kBufferSize = 4;
    wgpu::BufferDescriptor descriptor;
    descriptor.usage = wgpu::BufferUsage::MapWrite | wgpu::BufferUsage::CopySrc;
    descriptor.size = kBufferSize;
    wgpu::Buffer buffer = device.CreateBuffer(&descriptor);

    // Create a fake copy destination buffer
    descriptor.usage = wgpu::BufferUsage::CopyDst;
    wgpu::Buffer targetBuffer = device.CreateBuffer(&descriptor);

    // Create a command buffer that reads from the mappable buffer.
    wgpu::CommandBuffer commands;
    {
        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        encoder.CopyBufferToBuffer(buffer, 0, targetBuffer, 0, kBufferSize);
        commands = encoder.Finish();
    }

    wgpu::Queue queue = device.GetQueue();

    // Submitting when the buffer has never been mapped should succeed
    queue.Submit(1, &commands);

    {
        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        encoder.CopyBufferToBuffer(buffer, 0, targetBuffer, 0, kBufferSize);
        commands = encoder.Finish();
    }

    // Map the buffer, submitting when the buffer is mapped should fail
    buffer.MapAsync(wgpu::MapMode::Write, 0, kBufferSize, nullptr, nullptr);

    // Try submitting before the callback is fired.
    ASSERT_DEVICE_ERROR(queue.Submit(1, &commands));

    WaitForAllOperations(device);

    {
        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        encoder.CopyBufferToBuffer(buffer, 0, targetBuffer, 0, kBufferSize);
        commands = encoder.Finish();
    }

    // Try submitting after the callback is fired.
    ASSERT_DEVICE_ERROR(queue.Submit(1, &commands));

    {
        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        encoder.CopyBufferToBuffer(buffer, 0, targetBuffer, 0, kBufferSize);
        commands = encoder.Finish();
    }

    // Unmap the buffer, queue submit should succeed
    buffer.Unmap();
    queue.Submit(1, &commands);
}

// Test it is invalid to submit a command buffer twice
TEST_F(QueueSubmitValidationTest, CommandBufferSubmittedTwice) {
    wgpu::CommandBuffer commandBuffer = device.CreateCommandEncoder().Finish();
    wgpu::Queue queue = device.GetQueue();

    // Should succeed
    queue.Submit(1, &commandBuffer);

    // Should fail because command buffer was already submitted
    ASSERT_DEVICE_ERROR(queue.Submit(1, &commandBuffer));
}

// Test resubmitting failed command buffers
TEST_F(QueueSubmitValidationTest, CommandBufferSubmittedFailed) {
    // Create a map-write buffer
    const uint64_t kBufferSize = 4;
    wgpu::BufferDescriptor descriptor;
    descriptor.usage = wgpu::BufferUsage::MapWrite | wgpu::BufferUsage::CopySrc;
    descriptor.size = kBufferSize;
    wgpu::Buffer buffer = device.CreateBuffer(&descriptor);

    // Create a destination buffer for the b2b copy
    descriptor.usage = wgpu::BufferUsage::CopyDst;
    descriptor.size = kBufferSize;
    wgpu::Buffer targetBuffer = device.CreateBuffer(&descriptor);

    // Create a command buffer that reads from the mappable buffer
    wgpu::CommandBuffer commands;
    {
        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        encoder.CopyBufferToBuffer(buffer, 0, targetBuffer, 0, kBufferSize);
        commands = encoder.Finish();
    }

    wgpu::Queue queue = device.GetQueue();

    // Map the source buffer to force a failure
    buffer.MapAsync(wgpu::MapMode::Write, 0, kBufferSize, nullptr, nullptr);

    // Submitting a command buffer with a mapped buffer should fail
    ASSERT_DEVICE_ERROR(queue.Submit(1, &commands));

    // Unmap buffer to fix the failure
    buffer.Unmap();

    // Resubmitting any command buffer, even if the problem was fixed, should fail
    ASSERT_DEVICE_ERROR(queue.Submit(1, &commands));
}

// Test that submitting in a buffer mapping callback doesn't cause re-entrance problems.
TEST_F(QueueSubmitValidationTest, SubmitInBufferMapCallback) {
    // Create a buffer for mapping, to run our callback.
    wgpu::BufferDescriptor descriptor;
    descriptor.size = 4;
    descriptor.usage = wgpu::BufferUsage::MapWrite;
    wgpu::Buffer buffer = device.CreateBuffer(&descriptor);

    struct CallbackData {
        wgpu::Device device;
        wgpu::Buffer buffer;
    } callbackData = {device, buffer};

    const auto callback = [](WGPUBufferMapAsyncStatus status, void* userdata) {
        CallbackData* data = reinterpret_cast<CallbackData*>(userdata);

        data->buffer.Unmap();

        wgpu::Queue queue = data->device.GetQueue();
        queue.Submit(0, nullptr);
    };

    buffer.MapAsync(wgpu::MapMode::Write, 0, descriptor.size, callback, &callbackData);

    WaitForAllOperations(device);
}

// Test that submitting in a render pipeline creation callback doesn't cause re-entrance
// problems.
TEST_F(QueueSubmitValidationTest, SubmitInCreateRenderPipelineAsyncCallback) {
    struct CallbackData {
        wgpu::Device device;
    } callbackData = {device};

    const auto callback = [](WGPUCreatePipelineAsyncStatus status, WGPURenderPipeline pipeline,
                             char const* message, void* userdata) {
        CallbackData* data = reinterpret_cast<CallbackData*>(userdata);

        wgpuRenderPipelineRelease(pipeline);

        wgpu::Queue queue = data->device.GetQueue();
        queue.Submit(0, nullptr);
    };

    wgpu::ShaderModule vsModule = utils::CreateShaderModule(device, R"(
            @vertex fn main() -> @builtin(position) vec4f {
                return vec4f(0.0, 0.0, 0.0, 1.0);
            })");

    wgpu::ShaderModule fsModule = utils::CreateShaderModule(device, R"(
            @fragment fn main() -> @location(0) vec4f {
                return vec4f(0.0, 1.0, 0.0, 1.0);
            })");

    utils::ComboRenderPipelineDescriptor descriptor;
    descriptor.vertex.module = vsModule;
    descriptor.cFragment.module = fsModule;
    device.CreateRenderPipelineAsync(&descriptor, callback, &callbackData);

    WaitForAllOperations(device);
}

// Test that submitting in a compute pipeline creation callback doesn't cause re-entrance
// problems.
TEST_F(QueueSubmitValidationTest, SubmitInCreateComputePipelineAsyncCallback) {
    struct CallbackData {
        wgpu::Device device;
    } callbackData = {device};

    const auto callback = [](WGPUCreatePipelineAsyncStatus status, WGPUComputePipeline pipeline,
                             char const* message, void* userdata) {
        CallbackData* data = reinterpret_cast<CallbackData*>(userdata);

        wgpuComputePipelineRelease(pipeline);

        wgpu::Queue queue = data->device.GetQueue();
        queue.Submit(0, nullptr);
    };

    wgpu::ComputePipelineDescriptor descriptor;
    descriptor.compute.module = utils::CreateShaderModule(device, R"(
            @compute @workgroup_size(1) fn main() {
            })");
    descriptor.compute.entryPoint = "main";
    device.CreateComputePipelineAsync(&descriptor, callback, &callbackData);

    WaitForAllOperations(device);
}

// Test that buffers in unused compute pass bindgroups are still checked for in
// Queue::Submit validation.
TEST_F(QueueSubmitValidationTest, SubmitWithUnusedComputeBuffer) {
    wgpu::Queue queue = device.GetQueue();

    wgpu::BindGroupLayout emptyBGL = utils::MakeBindGroupLayout(device, {});
    wgpu::BindGroup emptyBG = utils::MakeBindGroup(device, emptyBGL, {});

    wgpu::BindGroupLayout testBGL = utils::MakeBindGroupLayout(
        device, {{0, wgpu::ShaderStage::Compute, wgpu::BufferBindingType::Storage}});

    // In this test we check that BindGroup 1 is checked, the texture test will check
    // BindGroup 2. This is to provide coverage of for loops in validation code.
    wgpu::ComputePipelineDescriptor cpDesc;
    cpDesc.layout = utils::MakePipelineLayout(device, {emptyBGL, testBGL});
    cpDesc.compute.entryPoint = "main";
    cpDesc.compute.module =
        utils::CreateShaderModule(device, "@compute @workgroup_size(1) fn main() {}");
    wgpu::ComputePipeline pipeline = device.CreateComputePipeline(&cpDesc);

    wgpu::BufferDescriptor bufDesc;
    bufDesc.size = 4;
    bufDesc.usage = wgpu::BufferUsage::Storage;

    // Test that completely unused bindgroups still have their buffers checked.
    for (bool destroy : {true, false}) {
        wgpu::Buffer unusedBuffer = device.CreateBuffer(&bufDesc);
        wgpu::BindGroup unusedBG = utils::MakeBindGroup(device, testBGL, {{0, unusedBuffer}});

        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
        pass.SetBindGroup(1, unusedBG);
        pass.End();
        wgpu::CommandBuffer commands = encoder.Finish();

        if (destroy) {
            unusedBuffer.Destroy();
            ASSERT_DEVICE_ERROR(queue.Submit(1, &commands));
        } else {
            queue.Submit(1, &commands);
        }
    }

    // Test that unused bindgroups because they were replaced still have their buffers checked.
    for (bool destroy : {true, false}) {
        wgpu::Buffer unusedBuffer = device.CreateBuffer(&bufDesc);
        wgpu::BindGroup unusedBG = utils::MakeBindGroup(device, testBGL, {{0, unusedBuffer}});

        wgpu::Buffer usedBuffer = device.CreateBuffer(&bufDesc);
        wgpu::BindGroup usedBG = utils::MakeBindGroup(device, testBGL, {{0, unusedBuffer}});

        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
        pass.SetBindGroup(0, emptyBG);
        pass.SetBindGroup(1, unusedBG);
        pass.SetBindGroup(1, usedBG);
        pass.SetPipeline(pipeline);
        pass.DispatchWorkgroups(1);
        pass.End();
        wgpu::CommandBuffer commands = encoder.Finish();

        if (destroy) {
            unusedBuffer.Destroy();
            ASSERT_DEVICE_ERROR(queue.Submit(1, &commands));
        } else {
            queue.Submit(1, &commands);
        }
    }
}

// Test that textures in unused compute pass bindgroups are still checked for in
// Queue::Submit validation.
TEST_F(QueueSubmitValidationTest, SubmitWithUnusedComputeTextures) {
    wgpu::Queue queue = device.GetQueue();

    wgpu::BindGroupLayout emptyBGL = utils::MakeBindGroupLayout(device, {});
    wgpu::BindGroup emptyBG = utils::MakeBindGroup(device, emptyBGL, {});

    wgpu::BindGroupLayout testBGL = utils::MakeBindGroupLayout(
        device, {{0, wgpu::ShaderStage::Compute, wgpu::TextureSampleType::Float}});

    wgpu::ComputePipelineDescriptor cpDesc;
    cpDesc.layout = utils::MakePipelineLayout(device, {emptyBGL, emptyBGL, testBGL});
    cpDesc.compute.entryPoint = "main";
    cpDesc.compute.module =
        utils::CreateShaderModule(device, "@compute @workgroup_size(1) fn main() {}");
    wgpu::ComputePipeline pipeline = device.CreateComputePipeline(&cpDesc);

    wgpu::TextureDescriptor texDesc;
    texDesc.size = {1, 1, 1};
    texDesc.usage = wgpu::TextureUsage::TextureBinding;
    texDesc.format = wgpu::TextureFormat::RGBA8Unorm;

    // Test that completely unused bindgroups still have their buffers checked.
    for (bool destroy : {true, false}) {
        wgpu::Texture unusedTexture = device.CreateTexture(&texDesc);
        wgpu::BindGroup unusedBG =
            utils::MakeBindGroup(device, testBGL, {{0, unusedTexture.CreateView()}});

        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
        pass.SetBindGroup(2, unusedBG);
        pass.End();
        wgpu::CommandBuffer commands = encoder.Finish();

        if (destroy) {
            unusedTexture.Destroy();
            ASSERT_DEVICE_ERROR(queue.Submit(1, &commands));
        } else {
            queue.Submit(1, &commands);
        }
    }

    // Test that unused bindgroups because they were replaced still have their buffers checked.
    for (bool destroy : {true, false}) {
        wgpu::Texture unusedTexture = device.CreateTexture(&texDesc);
        wgpu::BindGroup unusedBG =
            utils::MakeBindGroup(device, testBGL, {{0, unusedTexture.CreateView()}});

        wgpu::Texture usedTexture = device.CreateTexture(&texDesc);
        wgpu::BindGroup usedBG =
            utils::MakeBindGroup(device, testBGL, {{0, unusedTexture.CreateView()}});

        wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
        wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
        pass.SetBindGroup(0, emptyBG);
        pass.SetBindGroup(1, emptyBG);
        pass.SetBindGroup(2, unusedBG);
        pass.SetBindGroup(2, usedBG);
        pass.SetPipeline(pipeline);
        pass.DispatchWorkgroups(1);
        pass.End();
        wgpu::CommandBuffer commands = encoder.Finish();

        if (destroy) {
            unusedTexture.Destroy();
            ASSERT_DEVICE_ERROR(queue.Submit(1, &commands));
        } else {
            queue.Submit(1, &commands);
        }
    }
}

}  // anonymous namespace