// Copyright 2020 The Dawn Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#include <vector>

#include "dawn/common/Math.h"
#include "dawn/tests/unittests/validation/ValidationTest.h"
#include "dawn/utils/TestUtils.h"
#include "dawn/utils/TextureUtils.h"
#include "dawn/utils/WGPUHelpers.h"

namespace {

class QueueWriteTextureValidationTest : public ValidationTest {
  private:
    void SetUp() override {
        ValidationTest::SetUp();
        queue = device.GetQueue();
    }

  protected:
    wgpu::Texture Create2DTexture(wgpu::Extent3D size,
                                  uint32_t mipLevelCount,
                                  wgpu::TextureFormat format,
                                  wgpu::TextureUsage usage,
                                  uint32_t sampleCount = 1) {
        wgpu::TextureDescriptor descriptor;
        descriptor.dimension = wgpu::TextureDimension::e2D;
        descriptor.size.width = size.width;
        descriptor.size.height = size.height;
        descriptor.size.depthOrArrayLayers = size.depthOrArrayLayers;
        descriptor.sampleCount = sampleCount;
        descriptor.format = format;
        descriptor.mipLevelCount = mipLevelCount;
        descriptor.usage = usage;
        wgpu::Texture tex = device.CreateTexture(&descriptor);
        return tex;
    }

    void TestWriteTexture(size_t dataSize,
                          uint32_t dataOffset,
                          uint32_t dataBytesPerRow,
                          uint32_t dataRowsPerImage,
                          wgpu::Texture texture,
                          uint32_t texLevel,
                          wgpu::Origin3D texOrigin,
                          wgpu::Extent3D size,
                          wgpu::TextureAspect aspect = wgpu::TextureAspect::All) {
        std::vector<uint8_t> data(dataSize);

        wgpu::TextureDataLayout textureDataLayout;
        textureDataLayout.offset = dataOffset;
        textureDataLayout.bytesPerRow = dataBytesPerRow;
        textureDataLayout.rowsPerImage = dataRowsPerImage;

        wgpu::ImageCopyTexture imageCopyTexture =
            utils::CreateImageCopyTexture(texture, texLevel, texOrigin, aspect);

        queue.WriteTexture(&imageCopyTexture, data.data(), dataSize, &textureDataLayout, &size);
    }

    void TestWriteTextureExactDataSize(uint32_t bytesPerRow,
                                       uint32_t rowsPerImage,
                                       wgpu::Texture texture,
                                       wgpu::TextureFormat textureFormat,
                                       wgpu::Origin3D origin,
                                       wgpu::Extent3D extent3D) {
        // Check the minimal valid dataSize.
        uint64_t dataSize =
            utils::RequiredBytesInCopy(bytesPerRow, rowsPerImage, extent3D, textureFormat);
        TestWriteTexture(dataSize, 0, bytesPerRow, rowsPerImage, texture, 0, origin, extent3D);

        // Check dataSize was indeed minimal.
        uint64_t invalidSize = dataSize - 1;
        ASSERT_DEVICE_ERROR(TestWriteTexture(invalidSize, 0, bytesPerRow, rowsPerImage, texture, 0,
                                             origin, extent3D));
    }

    wgpu::Queue queue;
};

// Test the success case for WriteTexture
TEST_F(QueueWriteTextureValidationTest, Success) {
    const uint64_t dataSize =
        utils::RequiredBytesInCopy(256, 0, {4, 4, 1}, wgpu::TextureFormat::RGBA8Unorm);
    wgpu::Texture destination = Create2DTexture({16, 16, 4}, 5, wgpu::TextureFormat::RGBA8Unorm,
                                                wgpu::TextureUsage::CopyDst);

    // Different copies, including some that touch the OOB condition
    {
        // Copy 4x4 block in corner of first mip.
        TestWriteTexture(dataSize, 0, 256, 4, destination, 0, {0, 0, 0}, {4, 4, 1});
        // Copy 4x4 block in opposite corner of first mip.
        TestWriteTexture(dataSize, 0, 256, 4, destination, 0, {12, 12, 0}, {4, 4, 1});
        // Copy 4x4 block in the 4x4 mip.
        TestWriteTexture(dataSize, 0, 256, 4, destination, 2, {0, 0, 0}, {4, 4, 1});
        // Copy with a data offset
        TestWriteTexture(dataSize, dataSize - 4, 256, 1, destination, 0, {0, 0, 0}, {1, 1, 1});
        TestWriteTexture(dataSize, dataSize - 4, 256, wgpu::kCopyStrideUndefined, destination, 0,
                         {0, 0, 0}, {1, 1, 1});
    }

    // Copies with a 256-byte aligned bytes per row but unaligned texture region
    {
        // Unaligned region
        TestWriteTexture(dataSize, 0, 256, 4, destination, 0, {0, 0, 0}, {3, 4, 1});
        // Unaligned region with texture offset
        TestWriteTexture(dataSize, 0, 256, 3, destination, 0, {5, 7, 0}, {2, 3, 1});
        // Unaligned region, with data offset
        TestWriteTexture(dataSize, 31 * 4, 256, 3, destination, 0, {0, 0, 0}, {3, 3, 1});
    }

    // Empty copies are valid
    {
        // An empty copy
        TestWriteTexture(dataSize, 0, 0, 0, destination, 0, {0, 0, 0}, {0, 0, 1});
        TestWriteTexture(dataSize, 0, 0, wgpu::kCopyStrideUndefined, destination, 0, {0, 0, 0},
                         {0, 0, 1});
        // An empty copy with depth = 0
        TestWriteTexture(dataSize, 0, 0, 0, destination, 0, {0, 0, 0}, {0, 0, 0});
        TestWriteTexture(dataSize, 0, 0, wgpu::kCopyStrideUndefined, destination, 0, {0, 0, 0},
                         {0, 0, 0});
        // An empty copy touching the end of the data
        TestWriteTexture(dataSize, dataSize, 0, 0, destination, 0, {0, 0, 0}, {0, 0, 1});
        TestWriteTexture(dataSize, dataSize, 0, wgpu::kCopyStrideUndefined, destination, 0,
                         {0, 0, 0}, {0, 0, 1});
        // An empty copy touching the side of the texture
        TestWriteTexture(dataSize, 0, 0, 0, destination, 0, {16, 16, 0}, {0, 0, 1});
        TestWriteTexture(dataSize, 0, 0, wgpu::kCopyStrideUndefined, destination, 0, {16, 16, 0},
                         {0, 0, 1});
        // An empty copy with depth = 1 and bytesPerRow > 0
        TestWriteTexture(dataSize, 0, 256, 0, destination, 0, {0, 0, 0}, {0, 0, 1});
        TestWriteTexture(dataSize, 0, 256, wgpu::kCopyStrideUndefined, destination, 0, {0, 0, 0},
                         {0, 0, 1});
        // An empty copy with height > 0, depth = 0, bytesPerRow > 0 and rowsPerImage > 0
        TestWriteTexture(dataSize, 0, 256, wgpu::kCopyStrideUndefined, destination, 0, {0, 0, 0},
                         {0, 1, 0});
        TestWriteTexture(dataSize, 0, 256, 1, destination, 0, {0, 0, 0}, {0, 1, 0});
        TestWriteTexture(dataSize, 0, 256, 16, destination, 0, {0, 0, 0}, {0, 1, 0});
    }
}

// Test OOB conditions on the data
TEST_F(QueueWriteTextureValidationTest, OutOfBoundsOnData) {
    const uint64_t dataSize =
        utils::RequiredBytesInCopy(256, 0, {4, 4, 1}, wgpu::TextureFormat::RGBA8Unorm);
    wgpu::Texture destination = Create2DTexture({16, 16, 1}, 5, wgpu::TextureFormat::RGBA8Unorm,
                                                wgpu::TextureUsage::CopyDst);

    // OOB on the data because we copy too many pixels
    ASSERT_DEVICE_ERROR(
        TestWriteTexture(dataSize, 0, 256, 5, destination, 0, {0, 0, 0}, {4, 5, 1}));

    // OOB on the data because of the offset
    ASSERT_DEVICE_ERROR(
        TestWriteTexture(dataSize, 4, 256, 4, destination, 0, {0, 0, 0}, {4, 4, 1}));

    // OOB on the data because utils::RequiredBytesInCopy overflows
    ASSERT_DEVICE_ERROR(
        TestWriteTexture(dataSize, 0, 512, 3, destination, 0, {0, 0, 0}, {4, 3, 1}));

    // Not OOB on the data although bytes per row * height overflows
    // but utils::RequiredBytesInCopy * depth does not overflow
    {
        uint32_t sourceDataSize =
            utils::RequiredBytesInCopy(256, 0, {7, 3, 1}, wgpu::TextureFormat::RGBA8Unorm);
        ASSERT_TRUE(256 * 3 > sourceDataSize) << "bytes per row * height should overflow data";

        TestWriteTexture(sourceDataSize, 0, 256, 3, destination, 0, {0, 0, 0}, {7, 3, 1});
    }
}

// Test OOB conditions on the texture
TEST_F(QueueWriteTextureValidationTest, OutOfBoundsOnTexture) {
    const uint64_t dataSize =
        utils::RequiredBytesInCopy(256, 0, {4, 4, 1}, wgpu::TextureFormat::RGBA8Unorm);
    wgpu::Texture destination = Create2DTexture({16, 16, 2}, 5, wgpu::TextureFormat::RGBA8Unorm,
                                                wgpu::TextureUsage::CopyDst);

    // OOB on the texture because x + width overflows
    ASSERT_DEVICE_ERROR(
        TestWriteTexture(dataSize, 0, 256, 4, destination, 0, {13, 12, 0}, {4, 4, 1}));

    // OOB on the texture because y + width overflows
    ASSERT_DEVICE_ERROR(
        TestWriteTexture(dataSize, 0, 256, 4, destination, 0, {12, 13, 0}, {4, 4, 1}));

    // OOB on the texture because we overflow a non-zero mip
    ASSERT_DEVICE_ERROR(
        TestWriteTexture(dataSize, 0, 256, 4, destination, 2, {1, 0, 0}, {4, 4, 1}));

    // OOB on the texture even on an empty copy when we copy to a non-existent mip.
    ASSERT_DEVICE_ERROR(TestWriteTexture(dataSize, 0, 0, 0, destination, 5, {0, 0, 0}, {0, 0, 1}));

    // OOB on the texture because slice overflows
    ASSERT_DEVICE_ERROR(TestWriteTexture(dataSize, 0, 0, 0, destination, 0, {0, 0, 2}, {0, 0, 1}));
}

// Test that we force Depth=1 on writes to 2D textures
TEST_F(QueueWriteTextureValidationTest, DepthConstraintFor2DTextures) {
    const uint64_t dataSize =
        utils::RequiredBytesInCopy(0, 0, {0, 0, 2}, wgpu::TextureFormat::RGBA8Unorm);
    wgpu::Texture destination = Create2DTexture({16, 16, 1}, 5, wgpu::TextureFormat::RGBA8Unorm,
                                                wgpu::TextureUsage::CopyDst);

    // Depth > 1 on an empty copy still errors
    ASSERT_DEVICE_ERROR(TestWriteTexture(dataSize, 0, 0, 0, destination, 0, {0, 0, 0}, {0, 0, 2}));
}

// Test WriteTexture with incorrect texture usage
TEST_F(QueueWriteTextureValidationTest, IncorrectUsage) {
    const uint64_t dataSize =
        utils::RequiredBytesInCopy(256, 0, {4, 4, 1}, wgpu::TextureFormat::RGBA8Unorm);
    wgpu::Texture sampled = Create2DTexture({16, 16, 1}, 5, wgpu::TextureFormat::RGBA8Unorm,
                                            wgpu::TextureUsage::TextureBinding);

    // Incorrect destination usage
    ASSERT_DEVICE_ERROR(TestWriteTexture(dataSize, 0, 256, 4, sampled, 0, {0, 0, 0}, {4, 4, 1}));
}

// Test incorrect values of bytesPerRow and that values not divisible by 256 are allowed.
TEST_F(QueueWriteTextureValidationTest, BytesPerRowConstraints) {
    wgpu::Texture destination =
        Create2DTexture({3, 7, 2}, 1, wgpu::TextureFormat::RGBA8Unorm, wgpu::TextureUsage::CopyDst);

    // bytesPerRow = 0 or wgpu::kCopyStrideUndefined
    {
        // copyHeight > 1
        ASSERT_DEVICE_ERROR(TestWriteTexture(128, 0, 0, 7, destination, 0, {0, 0, 0}, {3, 7, 1}));
        TestWriteTexture(128, 0, 0, 7, destination, 0, {0, 0, 0}, {0, 7, 1});
        ASSERT_DEVICE_ERROR(TestWriteTexture(128, 0, wgpu::kCopyStrideUndefined, 7, destination, 0,
                                             {0, 0, 0}, {0, 7, 1}));

        // copyDepth > 1
        ASSERT_DEVICE_ERROR(TestWriteTexture(128, 0, 0, 1, destination, 0, {0, 0, 0}, {3, 1, 2}));
        TestWriteTexture(128, 0, 0, 1, destination, 0, {0, 0, 0}, {0, 1, 2});
        ASSERT_DEVICE_ERROR(TestWriteTexture(128, 0, wgpu::kCopyStrideUndefined, 1, destination, 0,
                                             {0, 0, 0}, {0, 1, 2}));

        // copyHeight = 1 and copyDepth = 1
        ASSERT_DEVICE_ERROR(TestWriteTexture(128, 0, 0, 1, destination, 0, {0, 0, 0}, {3, 1, 1}));
        TestWriteTexture(128, 0, wgpu::kCopyStrideUndefined, 1, destination, 0, {0, 0, 0},
                         {3, 1, 1});
    }

    // bytesPerRow = 11 is invalid since a row takes 12 bytes.
    {
        // copyHeight > 1
        ASSERT_DEVICE_ERROR(TestWriteTexture(128, 0, 11, 7, destination, 0, {0, 0, 0}, {3, 7, 1}));
        // copyHeight == 0
        ASSERT_DEVICE_ERROR(TestWriteTexture(128, 0, 11, 0, destination, 0, {0, 0, 0}, {3, 0, 1}));

        // copyDepth > 1
        ASSERT_DEVICE_ERROR(TestWriteTexture(128, 0, 11, 1, destination, 0, {0, 0, 0}, {3, 1, 2}));
        // copyDepth == 0
        ASSERT_DEVICE_ERROR(TestWriteTexture(128, 0, 11, 1, destination, 0, {0, 0, 0}, {3, 1, 0}));

        // copyHeight = 1 and copyDepth = 1
        ASSERT_DEVICE_ERROR(TestWriteTexture(128, 0, 11, 1, destination, 0, {0, 0, 0}, {3, 1, 1}));
    }

    // bytesPerRow = 12 is valid since a row takes 12 bytes.
    TestWriteTexture(128, 0, 12, 7, destination, 0, {0, 0, 0}, {3, 7, 1});

    // bytesPerRow = 13 is valid since a row takes 12 bytes.
    TestWriteTexture(128, 0, 13, 7, destination, 0, {0, 0, 0}, {3, 7, 1});
}

// Test that if rowsPerImage is greater than 0, it must be at least copy height.
TEST_F(QueueWriteTextureValidationTest, RowsPerImageConstraints) {
    uint64_t dataSize =
        utils::RequiredBytesInCopy(256, 5, {4, 4, 2}, wgpu::TextureFormat::RGBA8Unorm);
    wgpu::Texture destination = Create2DTexture({16, 16, 2}, 1, wgpu::TextureFormat::RGBA8Unorm,
                                                wgpu::TextureUsage::CopyDst);

    // rowsPerImage is wgpu::kCopyStrideUndefined
    TestWriteTexture(dataSize, 0, 256, wgpu::kCopyStrideUndefined, destination, 0, {0, 0, 0},
                     {4, 4, 1});

    // rowsPerImage is equal to copy height (Valid)
    TestWriteTexture(dataSize, 0, 256, 4, destination, 0, {0, 0, 0}, {4, 4, 1});

    // rowsPerImage is larger than copy height (Valid)
    TestWriteTexture(dataSize, 0, 256, 5, destination, 0, {0, 0, 0}, {4, 4, 1});
    TestWriteTexture(dataSize, 0, 256, 5, destination, 0, {0, 0, 0}, {4, 4, 2});

    // rowsPerImage is less than copy height (Invalid)
    ASSERT_DEVICE_ERROR(
        TestWriteTexture(dataSize, 0, 256, 3, destination, 0, {0, 0, 0}, {4, 4, 1}));
    ASSERT_DEVICE_ERROR(
        TestWriteTexture(dataSize, 0, 256, 0, destination, 0, {0, 0, 0}, {4, 4, 1}));
}

// Test WriteTexture with data offset
TEST_F(QueueWriteTextureValidationTest, DataOffset) {
    uint64_t dataSize =
        utils::RequiredBytesInCopy(256, 0, {4, 4, 1}, wgpu::TextureFormat::RGBA8Unorm);
    wgpu::Texture destination = Create2DTexture({16, 16, 1}, 5, wgpu::TextureFormat::RGBA8Unorm,
                                                wgpu::TextureUsage::CopyDst);

    // Offset aligned
    TestWriteTexture(dataSize, dataSize - 4, 256, 1, destination, 0, {0, 0, 0}, {1, 1, 1});
    // Offset not aligned
    TestWriteTexture(dataSize, dataSize - 5, 256, 1, destination, 0, {0, 0, 0}, {1, 1, 1});
    // Offset+size too large
    ASSERT_DEVICE_ERROR(
        TestWriteTexture(dataSize, dataSize - 3, 256, 1, destination, 0, {0, 0, 0}, {1, 1, 1}));
}

// Test multisampled textures can be used in WriteTexture.
TEST_F(QueueWriteTextureValidationTest, WriteToMultisampledTexture) {
    uint64_t dataSize =
        utils::RequiredBytesInCopy(256, 0, {2, 2, 1}, wgpu::TextureFormat::RGBA8Unorm);
    wgpu::Texture destination =
        Create2DTexture({2, 2, 1}, 1, wgpu::TextureFormat::RGBA8Unorm,
                        wgpu::TextureUsage::CopyDst | wgpu::TextureUsage::RenderAttachment, 4);

    ASSERT_DEVICE_ERROR(
        TestWriteTexture(dataSize, 0, 256, 2, destination, 0, {0, 0, 0}, {2, 2, 1}));
}

// Test that WriteTexture cannot be run with a destroyed texture.
TEST_F(QueueWriteTextureValidationTest, DestroyedTexture) {
    const uint64_t dataSize =
        utils::RequiredBytesInCopy(256, 4, {4, 4, 1}, wgpu::TextureFormat::RGBA8Unorm);
    wgpu::Texture destination = Create2DTexture({16, 16, 4}, 5, wgpu::TextureFormat::RGBA8Unorm,
                                                wgpu::TextureUsage::CopyDst);
    destination.Destroy();

    ASSERT_DEVICE_ERROR(
        TestWriteTexture(dataSize, 0, 256, 4, destination, 0, {0, 0, 0}, {4, 4, 1}));
}

// Test WriteTexture with texture in error state causes errors.
TEST_F(QueueWriteTextureValidationTest, TextureInErrorState) {
    wgpu::TextureDescriptor errorTextureDescriptor;
    errorTextureDescriptor.size.depthOrArrayLayers = 0;
    ASSERT_DEVICE_ERROR(wgpu::Texture errorTexture = device.CreateTexture(&errorTextureDescriptor));
    wgpu::ImageCopyTexture errorImageCopyTexture =
        utils::CreateImageCopyTexture(errorTexture, 0, {0, 0, 0});

    wgpu::Extent3D extent3D = {0, 0, 0};

    {
        std::vector<uint8_t> data(4);
        wgpu::TextureDataLayout textureDataLayout = utils::CreateTextureDataLayout(0, 0, 0);

        ASSERT_DEVICE_ERROR(queue.WriteTexture(&errorImageCopyTexture, data.data(), 4,
                                               &textureDataLayout, &extent3D));
    }
}

// Test that WriteTexture throws an error when requiredBytesInCopy overflows uint64_t
TEST_F(QueueWriteTextureValidationTest, RequiredBytesInCopyOverflow) {
    wgpu::Texture destination = Create2DTexture({1, 1, 16}, 1, wgpu::TextureFormat::RGBA8Unorm,
                                                wgpu::TextureUsage::CopyDst);

    // success because depth = 1.
    TestWriteTexture(10000, 0, (1 << 31), (1 << 31), destination, 0, {0, 0, 0}, {1, 1, 1});
    // failure because bytesPerImage * (depth - 1) overflows.
    ASSERT_DEVICE_ERROR(
        TestWriteTexture(10000, 0, (1 << 31), (1 << 31), destination, 0, {0, 0, 0}, {1, 1, 16}));
}

// Regression tests for a bug in the computation of texture data size in Dawn.
TEST_F(QueueWriteTextureValidationTest, TextureWriteDataSizeLastRowComputation) {
    constexpr uint32_t kBytesPerRow = 256;
    constexpr uint32_t kWidth = 4;
    constexpr uint32_t kHeight = 4;

    constexpr std::array<wgpu::TextureFormat, 2> kFormats = {wgpu::TextureFormat::RGBA8Unorm,
                                                             wgpu::TextureFormat::RG8Unorm};

    {
        // kBytesPerRow * (kHeight - 1) + kWidth is not large enough to be the valid data size
        // in this test because the data sizes in WriteTexture are not in texels but in bytes.
        constexpr uint32_t kInvalidDataSize = kBytesPerRow * (kHeight - 1) + kWidth;

        for (wgpu::TextureFormat format : kFormats) {
            wgpu::Texture destination =
                Create2DTexture({kWidth, kHeight, 1}, 1, format, wgpu::TextureUsage::CopyDst);
            ASSERT_DEVICE_ERROR(TestWriteTexture(kInvalidDataSize, 0, kBytesPerRow, kHeight,
                                                 destination, 0, {0, 0, 0}, {kWidth, kHeight, 1}));
        }
    }

    {
        for (wgpu::TextureFormat format : kFormats) {
            uint32_t validDataSize =
                utils::RequiredBytesInCopy(kBytesPerRow, 0, {kWidth, kHeight, 1}, format);
            wgpu::Texture destination =
                Create2DTexture({kWidth, kHeight, 1}, 1, format, wgpu::TextureUsage::CopyDst);

            // Verify the return value of RequiredBytesInCopy() is exactly the minimum valid
            // data size in this test.
            {
                uint32_t invalidDataSize = validDataSize - 1;
                ASSERT_DEVICE_ERROR(TestWriteTexture(invalidDataSize, 0, kBytesPerRow, kHeight,
                                                     destination, 0, {0, 0, 0},
                                                     {kWidth, kHeight, 1}));
            }

            {
                TestWriteTexture(validDataSize, 0, kBytesPerRow, kHeight, destination, 0, {0, 0, 0},
                                 {kWidth, kHeight, 1});
            }
        }
    }
}

// Test write from data to mip map of non square texture
TEST_F(QueueWriteTextureValidationTest, WriteToMipmapOfNonSquareTexture) {
    uint64_t dataSize =
        utils::RequiredBytesInCopy(256, 0, {4, 2, 1}, wgpu::TextureFormat::RGBA8Unorm);
    uint32_t maxMipmapLevel = 3;
    wgpu::Texture destination = Create2DTexture(
        {4, 2, 1}, maxMipmapLevel, wgpu::TextureFormat::RGBA8Unorm, wgpu::TextureUsage::CopyDst);

    // Copy to top level mip map
    TestWriteTexture(dataSize, 0, 256, 1, destination, maxMipmapLevel - 1, {0, 0, 0}, {1, 1, 1});
    // Copy to high level mip map
    TestWriteTexture(dataSize, 0, 256, 1, destination, maxMipmapLevel - 2, {0, 0, 0}, {2, 1, 1});
    // Mip level out of range
    ASSERT_DEVICE_ERROR(
        TestWriteTexture(dataSize, 0, 256, 1, destination, maxMipmapLevel, {0, 0, 0}, {1, 1, 1}));
    // Copy origin out of range
    ASSERT_DEVICE_ERROR(TestWriteTexture(dataSize, 0, 256, 1, destination, maxMipmapLevel - 2,
                                         {1, 0, 0}, {2, 1, 1}));
    // Copy size out of range
    ASSERT_DEVICE_ERROR(TestWriteTexture(dataSize, 0, 256, 2, destination, maxMipmapLevel - 2,
                                         {0, 0, 0}, {2, 2, 1}));
}

// Test writes to multiple array layers of an uncompressed texture
TEST_F(QueueWriteTextureValidationTest, WriteToMultipleArrayLayers) {
    wgpu::Texture destination = QueueWriteTextureValidationTest::Create2DTexture(
        {4, 2, 5}, 1, wgpu::TextureFormat::RGBA8Unorm,
        wgpu::TextureUsage::CopyDst | wgpu::TextureUsage::CopySrc);

    // Write to all array layers
    TestWriteTextureExactDataSize(256, 2, destination, wgpu::TextureFormat::RGBA8Unorm, {0, 0, 0},
                                  {4, 2, 5});

    // Write to the highest array layer
    TestWriteTextureExactDataSize(256, 2, destination, wgpu::TextureFormat::RGBA8Unorm, {0, 0, 4},
                                  {4, 2, 1});

    // Write to array layers in the middle
    TestWriteTextureExactDataSize(256, 2, destination, wgpu::TextureFormat::RGBA8Unorm, {0, 0, 1},
                                  {4, 2, 3});

    // Copy with a non-packed rowsPerImage
    TestWriteTextureExactDataSize(256, 3, destination, wgpu::TextureFormat::RGBA8Unorm, {0, 0, 0},
                                  {4, 2, 5});

    // Copy with bytesPerRow = 500
    TestWriteTextureExactDataSize(500, 2, destination, wgpu::TextureFormat::RGBA8Unorm, {0, 0, 1},
                                  {4, 2, 3});
}

// Test it is invalid to write into a depth texture.
TEST_F(QueueWriteTextureValidationTest, WriteToDepthAspect) {
    uint32_t bytesPerRow = sizeof(float) * 4;
    const uint64_t dataSize =
        utils::RequiredBytesInCopy(bytesPerRow, 0, {4, 4, 1}, wgpu::TextureFormat::Depth32Float);

    // Invalid to write into depth32float
    {
        wgpu::Texture destination = QueueWriteTextureValidationTest::Create2DTexture(
            {4, 4, 1}, 1, wgpu::TextureFormat::Depth32Float, wgpu::TextureUsage::CopyDst);

        ASSERT_DEVICE_ERROR(TestWriteTexture(dataSize, 0, bytesPerRow, 4, destination, 0, {0, 0, 0},
                                             {4, 4, 1}, wgpu::TextureAspect::All));

        ASSERT_DEVICE_ERROR(TestWriteTexture(dataSize, 0, bytesPerRow, 4, destination, 0, {0, 0, 0},
                                             {4, 4, 1}, wgpu::TextureAspect::DepthOnly));
    }

    // Invalid to write into depth24plus
    {
        wgpu::Texture destination = QueueWriteTextureValidationTest::Create2DTexture(
            {4, 4, 1}, 1, wgpu::TextureFormat::Depth24Plus, wgpu::TextureUsage::CopyDst);

        ASSERT_DEVICE_ERROR(TestWriteTexture(dataSize, 0, bytesPerRow, 4, destination, 0, {0, 0, 0},
                                             {4, 4, 1}, wgpu::TextureAspect::All));

        ASSERT_DEVICE_ERROR(TestWriteTexture(dataSize, 0, bytesPerRow, 4, destination, 0, {0, 0, 0},
                                             {4, 4, 1}, wgpu::TextureAspect::DepthOnly));
    }
}

// Test write texture to the stencil aspect
TEST_F(QueueWriteTextureValidationTest, WriteToStencilAspect) {
    uint32_t bytesPerRow = 4;
    const uint64_t dataSize =
        utils::RequiredBytesInCopy(bytesPerRow, 0, {4, 4, 1}, wgpu::TextureFormat::R8Uint);

    // It is valid to write into the stencil aspect of depth24plus-stencil8
    {
        wgpu::Texture destination = QueueWriteTextureValidationTest::Create2DTexture(
            {4, 4, 1}, 1, wgpu::TextureFormat::Depth24PlusStencil8, wgpu::TextureUsage::CopyDst);

        TestWriteTexture(dataSize, 0, bytesPerRow, wgpu::kCopyStrideUndefined, destination, 0,
                         {0, 0, 0}, {4, 4, 1}, wgpu::TextureAspect::StencilOnly);

        // And that it fails if the buffer is one byte too small
        ASSERT_DEVICE_ERROR(TestWriteTexture(dataSize - 1, 0, bytesPerRow, 4, destination, 0,
                                             {0, 0, 0}, {4, 4, 1},
                                             wgpu::TextureAspect::StencilOnly));

        // It is invalid to write just part of the subresource size
        ASSERT_DEVICE_ERROR(TestWriteTexture(dataSize, 0, bytesPerRow, 3, destination, 0, {0, 0, 0},
                                             {3, 3, 1}, wgpu::TextureAspect::StencilOnly));
    }

    // It is invalid to write into the stencil aspect of depth24plus (no stencil)
    {
        wgpu::Texture destination = QueueWriteTextureValidationTest::Create2DTexture(
            {4, 4, 1}, 1, wgpu::TextureFormat::Depth24Plus, wgpu::TextureUsage::CopyDst);

        ASSERT_DEVICE_ERROR(TestWriteTexture(dataSize, 0, bytesPerRow, 4, destination, 0, {0, 0, 0},
                                             {4, 4, 1}, wgpu::TextureAspect::StencilOnly));
    }
}

class WriteTextureTest_CompressedTextureFormats : public QueueWriteTextureValidationTest {
  protected:
    WGPUDevice CreateTestDevice(dawn::native::Adapter dawnAdapter) override {
        wgpu::DeviceDescriptor descriptor;
        wgpu::FeatureName requiredFeatures[3] = {wgpu::FeatureName::TextureCompressionBC,
                                                 wgpu::FeatureName::TextureCompressionETC2,
                                                 wgpu::FeatureName::TextureCompressionASTC};
        descriptor.requiredFeatures = requiredFeatures;
        descriptor.requiredFeaturesCount = 3;
        return dawnAdapter.CreateDevice(&descriptor);
    }

    wgpu::Texture Create2DTexture(wgpu::TextureFormat format,
                                  uint32_t mipmapLevels = 1,
                                  uint32_t width = kWidth,
                                  uint32_t height = kHeight) {
        constexpr wgpu::TextureUsage kUsage = wgpu::TextureUsage::CopyDst;
        constexpr uint32_t kArrayLayers = 1;
        return QueueWriteTextureValidationTest::Create2DTexture({width, height, kArrayLayers},
                                                                mipmapLevels, format, kUsage, 1);
    }

    void TestWriteTexture(size_t dataSize,
                          uint32_t dataOffset,
                          uint32_t dataBytesPerRow,
                          uint32_t dataRowsPerImage,
                          wgpu::Texture texture,
                          uint32_t textLevel,
                          wgpu::Origin3D textOrigin,
                          wgpu::Extent3D size) {
        QueueWriteTextureValidationTest::TestWriteTexture(dataSize, dataOffset, dataBytesPerRow,
                                                          dataRowsPerImage, texture, textLevel,
                                                          textOrigin, size);
    }

    static constexpr uint32_t kWidth = 120;
    static constexpr uint32_t kHeight = 120;
};

// Tests to verify that data offset may not be a multiple of the compressed texture block size
TEST_F(WriteTextureTest_CompressedTextureFormats, DataOffset) {
    for (wgpu::TextureFormat format : utils::kCompressedFormats) {
        wgpu::Texture texture = Create2DTexture(format);
        uint32_t blockWidth = utils::GetTextureFormatBlockWidth(format);
        uint32_t blockHeight = utils::GetTextureFormatBlockHeight(format);

        // Valid if aligned.
        {
            uint32_t kAlignedOffset = utils::GetTexelBlockSizeInBytes(format);
            TestWriteTexture(1024, kAlignedOffset, 256, 4, texture, 0, {0, 0, 0},
                             {blockWidth, blockHeight, 1});
        }

        // Still valid if not aligned.
        {
            uint32_t kUnalignedOffset = utils::GetTexelBlockSizeInBytes(format) - 1;
            TestWriteTexture(1024, kUnalignedOffset, 256, 4, texture, 0, {0, 0, 0},
                             {blockWidth, blockHeight, 1});
        }
    }
}

// Tests to verify that bytesPerRow must not be less than (width / blockWidth) *
// blockSizeInBytes and that it doesn't have to be a multiple of the compressed
// texture block width.
TEST_F(WriteTextureTest_CompressedTextureFormats, BytesPerRow) {
    // Used to compute test width and height.
    constexpr uint32_t kTestBytesPerRow = 320;

    for (wgpu::TextureFormat format : utils::kCompressedFormats) {
        uint32_t blockWidth = utils::GetTextureFormatBlockWidth(format);
        uint32_t blockHeight = utils::GetTextureFormatBlockHeight(format);
        uint32_t blockByteSize = utils::GetTexelBlockSizeInBytes(format);
        uint32_t testWidth = kTestBytesPerRow * blockWidth / blockByteSize;
        uint32_t testHeight = kTestBytesPerRow * blockHeight / blockByteSize;
        wgpu::Texture texture = Create2DTexture(format, 1, testWidth, testHeight);

        // Failures on the BytesPerRow that is not large enough.
        {
            uint32_t kSmallBytesPerRow = kTestBytesPerRow - blockByteSize;
            ASSERT_DEVICE_ERROR(TestWriteTexture(1024, 0, kSmallBytesPerRow, 4, texture, 0,
                                                 {0, 0, 0}, {testWidth, blockHeight, 1}));
        }

        // Test it is valid to use a BytesPerRow that is not a multiple of 256.
        {
            TestWriteTexture(1024, 0, kTestBytesPerRow, 4, texture, 0, {0, 0, 0},
                             {testWidth, blockHeight, 1});
        }

        // Valid usage of bytesPerRow in WriteTexture with compressed texture formats.
        {
            TestWriteTexture(512, 0, blockByteSize, 4, texture, 0, {0, 0, 0},
                             {blockWidth, blockHeight, 1});
        }

        // Valid usage of bytesPerRow in WriteTexture with compressed texture formats. Note that
        // BytesPerRow is not a multiple of the blockByteSize (but is greater than it).
        {
            TestWriteTexture(512, 0, blockByteSize + 1, 4, texture, 0, {0, 0, 0},
                             {blockWidth, blockHeight, 1});
        }
    }
}

// rowsPerImage must be >= heightInBlocks.
TEST_F(WriteTextureTest_CompressedTextureFormats, RowsPerImage) {
    for (wgpu::TextureFormat format : utils::kCompressedFormats) {
        wgpu::Texture texture = Create2DTexture(format);
        uint32_t blockWidth = utils::GetTextureFormatBlockWidth(format);
        uint32_t blockHeight = utils::GetTextureFormatBlockHeight(format);

        // Valid usages of rowsPerImage in WriteTexture with compressed texture formats.
        {
            constexpr uint32_t kValidRowsPerImage = 5;
            TestWriteTexture(1024, 0, 256, kValidRowsPerImage, texture, 0, {0, 0, 0},
                             {blockWidth, blockHeight * 4, 1});
        }
        {
            constexpr uint32_t kValidRowsPerImage = 4;
            TestWriteTexture(1024, 0, 256, kValidRowsPerImage, texture, 0, {0, 0, 0},
                             {blockWidth, blockHeight * 4, 1});
        }

        // rowsPerImage is smaller than height.
        {
            constexpr uint32_t kInvalidRowsPerImage = 3;
            ASSERT_DEVICE_ERROR(TestWriteTexture(1024, 0, 256, kInvalidRowsPerImage, texture, 0,
                                                 {0, 0, 0}, {blockWidth, blockWidth * 4, 1}));
        }
    }
}

// Tests to verify that ImageOffset.x must be a multiple of the compressed texture block width
// and ImageOffset.y must be a multiple of the compressed texture block height
TEST_F(WriteTextureTest_CompressedTextureFormats, ImageOffset) {
    for (wgpu::TextureFormat format : utils::kCompressedFormats) {
        wgpu::Texture texture = Create2DTexture(format);
        wgpu::Texture texture2 = Create2DTexture(format);
        uint32_t blockWidth = utils::GetTextureFormatBlockWidth(format);
        uint32_t blockHeight = utils::GetTextureFormatBlockHeight(format);

        wgpu::Origin3D smallestValidOrigin3D = {blockWidth, blockHeight, 0};

        // Valid usages of ImageOffset in WriteTexture with compressed texture formats.
        {
            TestWriteTexture(512, 0, 256, 4, texture, 0, smallestValidOrigin3D,
                             {blockWidth, blockHeight, 1});
        }

        // Failures on invalid ImageOffset.x.
        {
            wgpu::Origin3D invalidOrigin3D = {smallestValidOrigin3D.x - 1, smallestValidOrigin3D.y,
                                              0};
            ASSERT_DEVICE_ERROR(TestWriteTexture(512, 0, 256, 4, texture, 0, invalidOrigin3D,
                                                 {blockWidth, blockHeight, 1}));
        }

        // Failures on invalid ImageOffset.y.
        {
            wgpu::Origin3D invalidOrigin3D = {smallestValidOrigin3D.x, smallestValidOrigin3D.y - 1,
                                              0};
            ASSERT_DEVICE_ERROR(TestWriteTexture(512, 0, 256, 4, texture, 0, invalidOrigin3D,
                                                 {blockWidth, blockHeight, 1}));
        }
    }
}

// Tests to verify that ImageExtent.x must be a multiple of the compressed texture block width
// and ImageExtent.y must be a multiple of the compressed texture block height
TEST_F(WriteTextureTest_CompressedTextureFormats, ImageExtent) {
    constexpr uint32_t kMipmapLevels = 3;
    // We choose a prime that is greater than the current max texel dimension size as a
    // multiplier to compute the test texture size so that we can be certain that its level 2
    // mipmap (x4) cannot be a multiple of the dimension. This is useful for testing padding at
    // the edges of the mipmaps.
    constexpr uint32_t kBlockPerDim = 13;

    for (wgpu::TextureFormat format : utils::kCompressedFormats) {
        uint32_t blockWidth = utils::GetTextureFormatBlockWidth(format);
        uint32_t blockHeight = utils::GetTextureFormatBlockHeight(format);
        uint32_t testWidth = blockWidth * kBlockPerDim;
        uint32_t testHeight = blockHeight * kBlockPerDim;
        wgpu::Texture texture = Create2DTexture(format, kMipmapLevels, testWidth, testHeight);
        wgpu::Texture texture2 = Create2DTexture(format, kMipmapLevels, testWidth, testHeight);

        wgpu::Extent3D smallestValidExtent3D = {blockWidth, blockHeight, 1};

        // Valid usages of ImageExtent in WriteTexture with compressed texture formats.
        { TestWriteTexture(512, 0, 256, 4, texture, 0, {0, 0, 0}, smallestValidExtent3D); }

        // Valid usages of ImageExtent in WriteTexture with compressed texture formats
        // and non-zero mipmap levels.
        {
            constexpr uint32_t kTestMipmapLevel = 2;
            wgpu::Origin3D testOrigin = {
                ((testWidth >> kTestMipmapLevel) / blockWidth) * blockWidth,
                ((testHeight >> kTestMipmapLevel) / blockHeight) * blockHeight, 0};

            TestWriteTexture(512, 0, 256, 4, texture, kTestMipmapLevel, testOrigin,
                             smallestValidExtent3D);
        }

        // Failures on invalid ImageExtent.x.
        {
            wgpu::Extent3D inValidExtent3D = {smallestValidExtent3D.width - 1,
                                              smallestValidExtent3D.height, 1};
            ASSERT_DEVICE_ERROR(
                TestWriteTexture(512, 0, 256, 4, texture, 0, {0, 0, 0}, inValidExtent3D));
        }

        // Failures on invalid ImageExtent.y.
        {
            wgpu::Extent3D inValidExtent3D = {smallestValidExtent3D.width,
                                              smallestValidExtent3D.height - 1, 1};
            ASSERT_DEVICE_ERROR(
                TestWriteTexture(512, 0, 256, 4, texture, 0, {0, 0, 0}, inValidExtent3D));
        }
    }
}

// Test writes to multiple array layers of a compressed texture
TEST_F(WriteTextureTest_CompressedTextureFormats, WriteToMultipleArrayLayers) {
    constexpr uint32_t kWidthMultiplier = 3;
    constexpr uint32_t kHeightMultiplier = 4;
    for (wgpu::TextureFormat format : utils::kCompressedFormats) {
        uint32_t blockWidth = utils::GetTextureFormatBlockWidth(format);
        uint32_t blockHeight = utils::GetTextureFormatBlockHeight(format);
        uint32_t testWidth = kWidthMultiplier * blockWidth;
        uint32_t testHeight = kHeightMultiplier * blockHeight;
        wgpu::Texture texture = QueueWriteTextureValidationTest::Create2DTexture(
            {testWidth, testHeight, 20}, 1, format,
            wgpu::TextureUsage::CopyDst | wgpu::TextureUsage::CopySrc);

        // Write to all array layers
        TestWriteTextureExactDataSize(256, 4, texture, format, {0, 0, 0},
                                      {testWidth, testHeight, 20});

        // Write to the highest array layer
        TestWriteTextureExactDataSize(256, 4, texture, format, {0, 0, 19},
                                      {testWidth, testHeight, 1});

        // Write to array layers in the middle
        TestWriteTextureExactDataSize(256, 4, texture, format, {0, 0, 1},
                                      {testWidth, testHeight, 18});

        // Write touching the texture corners with a non-packed rowsPerImage
        TestWriteTextureExactDataSize(256, 6, texture, format, {blockWidth, blockHeight, 4},
                                      {testWidth - blockWidth, testHeight - blockHeight, 16});
    }
}

}  // anonymous namespace