| // Copyright 2017 The Dawn Authors |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "dawn_native/d3d12/CommandBufferD3D12.h" |
| |
| #include "common/Assert.h" |
| #include "dawn_native/BindGroupAndStorageBarrierTracker.h" |
| #include "dawn_native/CommandEncoder.h" |
| #include "dawn_native/Commands.h" |
| #include "dawn_native/RenderBundle.h" |
| #include "dawn_native/d3d12/BindGroupD3D12.h" |
| #include "dawn_native/d3d12/BindGroupLayoutD3D12.h" |
| #include "dawn_native/d3d12/BufferD3D12.h" |
| #include "dawn_native/d3d12/CommandRecordingContext.h" |
| #include "dawn_native/d3d12/ComputePipelineD3D12.h" |
| #include "dawn_native/d3d12/DescriptorHeapAllocator.h" |
| #include "dawn_native/d3d12/DeviceD3D12.h" |
| #include "dawn_native/d3d12/PipelineLayoutD3D12.h" |
| #include "dawn_native/d3d12/PlatformFunctions.h" |
| #include "dawn_native/d3d12/RenderPipelineD3D12.h" |
| #include "dawn_native/d3d12/SamplerD3D12.h" |
| #include "dawn_native/d3d12/TextureCopySplitter.h" |
| #include "dawn_native/d3d12/TextureD3D12.h" |
| #include "dawn_native/d3d12/UtilsD3D12.h" |
| |
| #include <deque> |
| |
| namespace dawn_native { namespace d3d12 { |
| |
| namespace { |
| |
| DXGI_FORMAT DXGIIndexFormat(wgpu::IndexFormat format) { |
| switch (format) { |
| case wgpu::IndexFormat::Uint16: |
| return DXGI_FORMAT_R16_UINT; |
| case wgpu::IndexFormat::Uint32: |
| return DXGI_FORMAT_R32_UINT; |
| default: |
| UNREACHABLE(); |
| } |
| } |
| |
| bool CanUseCopyResource(const uint32_t sourceNumMipLevels, |
| const Extent3D& srcSize, |
| const Extent3D& dstSize, |
| const Extent3D& copySize) { |
| if (sourceNumMipLevels == 1 && srcSize.width == dstSize.width && |
| srcSize.height == dstSize.height && srcSize.depth == dstSize.depth && |
| srcSize.width == copySize.width && srcSize.height == copySize.height && |
| srcSize.depth == copySize.depth) { |
| return true; |
| } |
| |
| return false; |
| } |
| |
| struct OMSetRenderTargetArgs { |
| unsigned int numRTVs = 0; |
| std::array<D3D12_CPU_DESCRIPTOR_HANDLE, kMaxColorAttachments> RTVs = {}; |
| D3D12_CPU_DESCRIPTOR_HANDLE dsv = {}; |
| }; |
| |
| } // anonymous namespace |
| |
| class BindGroupStateTracker : public BindGroupAndStorageBarrierTrackerBase<false, uint64_t> { |
| public: |
| BindGroupStateTracker(Device* device) |
| : BindGroupAndStorageBarrierTrackerBase(), mDevice(device) { |
| } |
| |
| void SetInComputePass(bool inCompute_) { |
| mInCompute = inCompute_; |
| } |
| |
| MaybeError AllocateDescriptorHeaps(Device* device) { |
| // This function should only be called once. |
| ASSERT(mCbvSrvUavGPUDescriptorHeap.Get() == nullptr && |
| mSamplerGPUDescriptorHeap.Get() == nullptr); |
| |
| DescriptorHeapAllocator* descriptorHeapAllocator = device->GetDescriptorHeapAllocator(); |
| |
| if (mCbvSrvUavDescriptorHeapSize > 0) { |
| DAWN_TRY_ASSIGN( |
| mCbvSrvUavGPUDescriptorHeap, |
| descriptorHeapAllocator->AllocateGPUHeap(D3D12_DESCRIPTOR_HEAP_TYPE_CBV_SRV_UAV, |
| mCbvSrvUavDescriptorHeapSize)); |
| } |
| |
| if (mSamplerDescriptorHeapSize > 0) { |
| DAWN_TRY_ASSIGN(mSamplerGPUDescriptorHeap, descriptorHeapAllocator->AllocateGPUHeap( |
| D3D12_DESCRIPTOR_HEAP_TYPE_SAMPLER, |
| mSamplerDescriptorHeapSize)); |
| } |
| |
| uint32_t cbvSrvUavDescriptorIndex = 0; |
| uint32_t samplerDescriptorIndex = 0; |
| for (BindGroup* group : mBindGroupsToAllocate) { |
| ASSERT(group); |
| ASSERT(cbvSrvUavDescriptorIndex + |
| ToBackend(group->GetLayout())->GetCbvUavSrvDescriptorCount() <= |
| mCbvSrvUavDescriptorHeapSize); |
| ASSERT(samplerDescriptorIndex + |
| ToBackend(group->GetLayout())->GetSamplerDescriptorCount() <= |
| mSamplerDescriptorHeapSize); |
| group->AllocateDescriptors(mCbvSrvUavGPUDescriptorHeap, &cbvSrvUavDescriptorIndex, |
| mSamplerGPUDescriptorHeap, &samplerDescriptorIndex); |
| } |
| |
| ASSERT(cbvSrvUavDescriptorIndex == mCbvSrvUavDescriptorHeapSize); |
| ASSERT(samplerDescriptorIndex == mSamplerDescriptorHeapSize); |
| |
| return {}; |
| } |
| |
| // This function must only be called before calling AllocateDescriptorHeaps(). |
| void TrackSetBindGroup(BindGroup* group, uint32_t index, uint32_t indexInSubmit) { |
| if (mBindGroups[index] != group) { |
| mBindGroups[index] = group; |
| if (!group->TestAndSetCounted(mDevice->GetPendingCommandSerial(), indexInSubmit)) { |
| const BindGroupLayout* layout = ToBackend(group->GetLayout()); |
| |
| mCbvSrvUavDescriptorHeapSize += layout->GetCbvUavSrvDescriptorCount(); |
| mSamplerDescriptorHeapSize += layout->GetSamplerDescriptorCount(); |
| mBindGroupsToAllocate.push_back(group); |
| } |
| } |
| } |
| |
| void Apply(CommandRecordingContext* commandContext) { |
| ID3D12GraphicsCommandList* commandList = commandContext->GetCommandList(); |
| |
| for (uint32_t index : IterateBitSet(mDirtyBindGroupsObjectChangedOrIsDynamic)) { |
| ApplyBindGroup(commandList, ToBackend(mPipelineLayout), index, |
| ToBackend(mBindGroups[index]), mDynamicOffsetCounts[index], |
| mDynamicOffsets[index].data()); |
| } |
| |
| if (mInCompute) { |
| for (uint32_t index : IterateBitSet(mBindGroupLayoutsMask)) { |
| for (uint32_t binding : IterateBitSet(mBuffersNeedingBarrier[index])) { |
| wgpu::BindingType bindingType = mBindingTypes[index][binding]; |
| switch (bindingType) { |
| case wgpu::BindingType::StorageBuffer: |
| ToBackend(mBuffers[index][binding]) |
| ->TransitionUsageNow(commandContext, |
| wgpu::BufferUsage::Storage); |
| break; |
| |
| case wgpu::BindingType::StorageTexture: |
| // Not implemented. |
| |
| case wgpu::BindingType::UniformBuffer: |
| case wgpu::BindingType::ReadonlyStorageBuffer: |
| case wgpu::BindingType::Sampler: |
| case wgpu::BindingType::SampledTexture: |
| // Don't require barriers. |
| |
| default: |
| UNREACHABLE(); |
| break; |
| } |
| } |
| } |
| } |
| DidApply(); |
| } |
| |
| void Reset() { |
| for (uint32_t i = 0; i < kMaxBindGroups; ++i) { |
| mBindGroups[i] = nullptr; |
| } |
| } |
| |
| void SetID3D12DescriptorHeaps(ComPtr<ID3D12GraphicsCommandList> commandList) { |
| ASSERT(commandList != nullptr); |
| ID3D12DescriptorHeap* descriptorHeaps[2] = {mCbvSrvUavGPUDescriptorHeap.Get(), |
| mSamplerGPUDescriptorHeap.Get()}; |
| if (descriptorHeaps[0] && descriptorHeaps[1]) { |
| commandList->SetDescriptorHeaps(2, descriptorHeaps); |
| } else if (descriptorHeaps[0]) { |
| commandList->SetDescriptorHeaps(1, descriptorHeaps); |
| } else if (descriptorHeaps[1]) { |
| commandList->SetDescriptorHeaps(1, &descriptorHeaps[1]); |
| } |
| } |
| |
| private: |
| void ApplyBindGroup(ID3D12GraphicsCommandList* commandList, |
| PipelineLayout* pipelineLayout, |
| uint32_t index, |
| BindGroup* group, |
| uint32_t dynamicOffsetCount, |
| uint64_t* dynamicOffsets) { |
| // Usually, the application won't set the same offsets many times, |
| // so always try to apply dynamic offsets even if the offsets stay the same |
| if (dynamicOffsetCount) { |
| // Update dynamic offsets |
| const BindGroupLayout::LayoutBindingInfo& layout = |
| group->GetLayout()->GetBindingInfo(); |
| uint32_t currentDynamicBufferIndex = 0; |
| |
| for (uint32_t bindingIndex : IterateBitSet(layout.hasDynamicOffset)) { |
| ASSERT(dynamicOffsetCount > 0); |
| uint32_t parameterIndex = |
| pipelineLayout->GetDynamicRootParameterIndex(index, bindingIndex); |
| BufferBinding binding = group->GetBindingAsBufferBinding(bindingIndex); |
| |
| // Calculate buffer locations that root descriptors links to. The location |
| // is (base buffer location + initial offset + dynamic offset) |
| uint64_t dynamicOffset = dynamicOffsets[currentDynamicBufferIndex]; |
| uint64_t offset = binding.offset + dynamicOffset; |
| D3D12_GPU_VIRTUAL_ADDRESS bufferLocation = |
| ToBackend(binding.buffer)->GetVA() + offset; |
| |
| switch (layout.types[bindingIndex]) { |
| case wgpu::BindingType::UniformBuffer: |
| if (mInCompute) { |
| commandList->SetComputeRootConstantBufferView(parameterIndex, |
| bufferLocation); |
| } else { |
| commandList->SetGraphicsRootConstantBufferView(parameterIndex, |
| bufferLocation); |
| } |
| break; |
| case wgpu::BindingType::StorageBuffer: |
| if (mInCompute) { |
| commandList->SetComputeRootUnorderedAccessView(parameterIndex, |
| bufferLocation); |
| } else { |
| commandList->SetGraphicsRootUnorderedAccessView(parameterIndex, |
| bufferLocation); |
| } |
| break; |
| case wgpu::BindingType::SampledTexture: |
| case wgpu::BindingType::Sampler: |
| case wgpu::BindingType::StorageTexture: |
| case wgpu::BindingType::ReadonlyStorageBuffer: |
| UNREACHABLE(); |
| break; |
| } |
| |
| ++currentDynamicBufferIndex; |
| } |
| } |
| |
| // It's not necessary to update descriptor tables if only the dynamic offset changed. |
| if (!mDirtyBindGroups[index]) { |
| return; |
| } |
| |
| uint32_t cbvUavSrvCount = ToBackend(group->GetLayout())->GetCbvUavSrvDescriptorCount(); |
| uint32_t samplerCount = ToBackend(group->GetLayout())->GetSamplerDescriptorCount(); |
| |
| if (cbvUavSrvCount > 0) { |
| uint32_t parameterIndex = pipelineLayout->GetCbvUavSrvRootParameterIndex(index); |
| |
| if (mInCompute) { |
| commandList->SetComputeRootDescriptorTable( |
| parameterIndex, |
| mCbvSrvUavGPUDescriptorHeap.GetGPUHandle(group->GetCbvUavSrvHeapOffset())); |
| } else { |
| commandList->SetGraphicsRootDescriptorTable( |
| parameterIndex, |
| mCbvSrvUavGPUDescriptorHeap.GetGPUHandle(group->GetCbvUavSrvHeapOffset())); |
| } |
| } |
| |
| if (samplerCount > 0) { |
| uint32_t parameterIndex = pipelineLayout->GetSamplerRootParameterIndex(index); |
| |
| if (mInCompute) { |
| commandList->SetComputeRootDescriptorTable( |
| parameterIndex, |
| mSamplerGPUDescriptorHeap.GetGPUHandle(group->GetSamplerHeapOffset())); |
| } else { |
| commandList->SetGraphicsRootDescriptorTable( |
| parameterIndex, |
| mSamplerGPUDescriptorHeap.GetGPUHandle(group->GetSamplerHeapOffset())); |
| } |
| } |
| } |
| |
| uint32_t mCbvSrvUavDescriptorHeapSize = 0; |
| uint32_t mSamplerDescriptorHeapSize = 0; |
| std::deque<BindGroup*> mBindGroupsToAllocate = {}; |
| bool mInCompute = false; |
| |
| DescriptorHeapHandle mCbvSrvUavGPUDescriptorHeap = {}; |
| DescriptorHeapHandle mSamplerGPUDescriptorHeap = {}; |
| |
| Device* mDevice; |
| }; |
| |
| class RenderPassDescriptorHeapTracker { |
| public: |
| RenderPassDescriptorHeapTracker(Device* device) : mDevice(device) { |
| } |
| |
| // This function must only be called before calling AllocateRTVAndDSVHeaps(). |
| void TrackRenderPass(const BeginRenderPassCmd* renderPass) { |
| DAWN_ASSERT(mRTVHeap.Get() == nullptr && mDSVHeap.Get() == nullptr); |
| |
| mNumRTVs += static_cast<uint32_t>( |
| renderPass->attachmentState->GetColorAttachmentsMask().count()); |
| if (renderPass->attachmentState->HasDepthStencilAttachment()) { |
| ++mNumDSVs; |
| } |
| } |
| |
| MaybeError AllocateRTVAndDSVHeaps() { |
| // This function should only be called once. |
| DAWN_ASSERT(mRTVHeap.Get() == nullptr && mDSVHeap.Get() == nullptr); |
| DescriptorHeapAllocator* allocator = mDevice->GetDescriptorHeapAllocator(); |
| if (mNumRTVs > 0) { |
| DAWN_TRY_ASSIGN( |
| mRTVHeap, allocator->AllocateCPUHeap(D3D12_DESCRIPTOR_HEAP_TYPE_RTV, mNumRTVs)); |
| } |
| if (mNumDSVs > 0) { |
| DAWN_TRY_ASSIGN( |
| mDSVHeap, allocator->AllocateCPUHeap(D3D12_DESCRIPTOR_HEAP_TYPE_DSV, mNumDSVs)); |
| } |
| return {}; |
| } |
| |
| // TODO(jiawei.shao@intel.com): use hash map <RenderPass, OMSetRenderTargetArgs> as |
| // cache to avoid redundant RTV and DSV memory allocations. |
| OMSetRenderTargetArgs GetSubpassOMSetRenderTargetArgs(BeginRenderPassCmd* renderPass) { |
| OMSetRenderTargetArgs args = {}; |
| |
| unsigned int rtvIndex = 0; |
| uint32_t rtvCount = static_cast<uint32_t>( |
| renderPass->attachmentState->GetColorAttachmentsMask().count()); |
| DAWN_ASSERT(mAllocatedRTVs + rtvCount <= mNumRTVs); |
| for (uint32_t i : |
| IterateBitSet(renderPass->attachmentState->GetColorAttachmentsMask())) { |
| TextureView* view = ToBackend(renderPass->colorAttachments[i].view).Get(); |
| D3D12_CPU_DESCRIPTOR_HANDLE rtvHandle = mRTVHeap.GetCPUHandle(mAllocatedRTVs); |
| D3D12_RENDER_TARGET_VIEW_DESC rtvDesc = view->GetRTVDescriptor(); |
| mDevice->GetD3D12Device()->CreateRenderTargetView( |
| ToBackend(view->GetTexture())->GetD3D12Resource(), &rtvDesc, rtvHandle); |
| args.RTVs[i] = rtvHandle; |
| |
| ++rtvIndex; |
| ++mAllocatedRTVs; |
| } |
| args.numRTVs = rtvIndex; |
| |
| if (renderPass->attachmentState->HasDepthStencilAttachment()) { |
| DAWN_ASSERT(mAllocatedDSVs < mNumDSVs); |
| TextureView* view = ToBackend(renderPass->depthStencilAttachment.view).Get(); |
| D3D12_CPU_DESCRIPTOR_HANDLE dsvHandle = mDSVHeap.GetCPUHandle(mAllocatedDSVs); |
| D3D12_DEPTH_STENCIL_VIEW_DESC dsvDesc = view->GetDSVDescriptor(); |
| mDevice->GetD3D12Device()->CreateDepthStencilView( |
| ToBackend(view->GetTexture())->GetD3D12Resource(), &dsvDesc, dsvHandle); |
| args.dsv = dsvHandle; |
| |
| ++mAllocatedDSVs; |
| } |
| |
| return args; |
| } |
| |
| bool IsHeapAllocationCompleted() const { |
| return mNumRTVs == mAllocatedRTVs && mNumDSVs == mAllocatedDSVs; |
| } |
| |
| private: |
| Device* mDevice; |
| DescriptorHeapHandle mRTVHeap = {}; |
| DescriptorHeapHandle mDSVHeap = {}; |
| uint32_t mNumRTVs = 0; |
| uint32_t mNumDSVs = 0; |
| |
| uint32_t mAllocatedRTVs = 0; |
| uint32_t mAllocatedDSVs = 0; |
| }; |
| |
| namespace { |
| |
| class VertexBufferTracker { |
| public: |
| void OnSetVertexBuffer(uint32_t slot, Buffer* buffer, uint64_t offset) { |
| mStartSlot = std::min(mStartSlot, slot); |
| mEndSlot = std::max(mEndSlot, slot + 1); |
| |
| auto* d3d12BufferView = &mD3D12BufferViews[slot]; |
| d3d12BufferView->BufferLocation = buffer->GetVA() + offset; |
| d3d12BufferView->SizeInBytes = buffer->GetSize() - offset; |
| // The bufferView stride is set based on the vertex state before a draw. |
| } |
| |
| void Apply(ID3D12GraphicsCommandList* commandList, |
| const RenderPipeline* renderPipeline) { |
| ASSERT(renderPipeline != nullptr); |
| |
| std::bitset<kMaxVertexBuffers> vertexBufferSlotsUsed = |
| renderPipeline->GetVertexBufferSlotsUsed(); |
| |
| uint32_t startSlot = mStartSlot; |
| uint32_t endSlot = mEndSlot; |
| |
| // If the vertex state has changed, we need to update the StrideInBytes |
| // for the D3D12 buffer views. We also need to extend the dirty range to |
| // touch all these slots because the stride may have changed. |
| if (mLastAppliedRenderPipeline != renderPipeline) { |
| mLastAppliedRenderPipeline = renderPipeline; |
| |
| for (uint32_t slot : IterateBitSet(vertexBufferSlotsUsed)) { |
| startSlot = std::min(startSlot, slot); |
| endSlot = std::max(endSlot, slot + 1); |
| mD3D12BufferViews[slot].StrideInBytes = |
| renderPipeline->GetVertexBuffer(slot).arrayStride; |
| } |
| } |
| |
| if (endSlot <= startSlot) { |
| return; |
| } |
| |
| // mD3D12BufferViews is kept up to date with the most recent data passed |
| // to SetVertexBuffer. This makes it correct to only track the start |
| // and end of the dirty range. When Apply is called, |
| // we will at worst set non-dirty vertex buffers in duplicate. |
| uint32_t count = endSlot - startSlot; |
| commandList->IASetVertexBuffers(startSlot, count, &mD3D12BufferViews[startSlot]); |
| |
| mStartSlot = kMaxVertexBuffers; |
| mEndSlot = 0; |
| } |
| |
| private: |
| // startSlot and endSlot indicate the range of dirty vertex buffers. |
| // If there are multiple calls to SetVertexBuffer, the start and end |
| // represent the union of the dirty ranges (the union may have non-dirty |
| // data in the middle of the range). |
| const RenderPipeline* mLastAppliedRenderPipeline = nullptr; |
| uint32_t mStartSlot = kMaxVertexBuffers; |
| uint32_t mEndSlot = 0; |
| std::array<D3D12_VERTEX_BUFFER_VIEW, kMaxVertexBuffers> mD3D12BufferViews = {}; |
| }; |
| |
| class IndexBufferTracker { |
| public: |
| void OnSetIndexBuffer(Buffer* buffer, uint64_t offset) { |
| mD3D12BufferView.BufferLocation = buffer->GetVA() + offset; |
| mD3D12BufferView.SizeInBytes = buffer->GetSize() - offset; |
| |
| // We don't need to dirty the state unless BufferLocation or SizeInBytes |
| // change, but most of the time this will always be the case. |
| mLastAppliedIndexFormat = DXGI_FORMAT_UNKNOWN; |
| } |
| |
| void OnSetPipeline(const RenderPipelineBase* pipeline) { |
| mD3D12BufferView.Format = |
| DXGIIndexFormat(pipeline->GetVertexStateDescriptor()->indexFormat); |
| } |
| |
| void Apply(ID3D12GraphicsCommandList* commandList) { |
| if (mD3D12BufferView.Format == mLastAppliedIndexFormat) { |
| return; |
| } |
| |
| commandList->IASetIndexBuffer(&mD3D12BufferView); |
| mLastAppliedIndexFormat = mD3D12BufferView.Format; |
| } |
| |
| private: |
| DXGI_FORMAT mLastAppliedIndexFormat = DXGI_FORMAT_UNKNOWN; |
| D3D12_INDEX_BUFFER_VIEW mD3D12BufferView = {}; |
| }; |
| |
| MaybeError AllocateAndSetDescriptorHeaps(Device* device, |
| BindGroupStateTracker* bindingTracker, |
| RenderPassDescriptorHeapTracker* renderPassTracker, |
| CommandIterator* commands, |
| uint32_t indexInSubmit) { |
| { |
| Command type; |
| |
| auto HandleCommand = [&](CommandIterator* commands, Command type) { |
| switch (type) { |
| case Command::SetBindGroup: { |
| SetBindGroupCmd* cmd = commands->NextCommand<SetBindGroupCmd>(); |
| BindGroup* group = ToBackend(cmd->group.Get()); |
| if (cmd->dynamicOffsetCount) { |
| commands->NextData<uint32_t>(cmd->dynamicOffsetCount); |
| } |
| bindingTracker->TrackSetBindGroup(group, cmd->index, indexInSubmit); |
| } break; |
| case Command::BeginRenderPass: { |
| BeginRenderPassCmd* cmd = commands->NextCommand<BeginRenderPassCmd>(); |
| renderPassTracker->TrackRenderPass(cmd); |
| } break; |
| default: |
| SkipCommand(commands, type); |
| } |
| }; |
| |
| while (commands->NextCommandId(&type)) { |
| switch (type) { |
| case Command::ExecuteBundles: { |
| ExecuteBundlesCmd* cmd = commands->NextCommand<ExecuteBundlesCmd>(); |
| auto bundles = commands->NextData<Ref<RenderBundleBase>>(cmd->count); |
| |
| for (uint32_t i = 0; i < cmd->count; ++i) { |
| CommandIterator* commands = bundles[i]->GetCommands(); |
| commands->Reset(); |
| while (commands->NextCommandId(&type)) { |
| HandleCommand(commands, type); |
| } |
| } |
| } break; |
| default: |
| HandleCommand(commands, type); |
| break; |
| } |
| } |
| |
| commands->Reset(); |
| } |
| |
| DAWN_TRY(renderPassTracker->AllocateRTVAndDSVHeaps()); |
| DAWN_TRY(bindingTracker->AllocateDescriptorHeaps(device)); |
| return {}; |
| } |
| |
| void ResolveMultisampledRenderPass(CommandRecordingContext* commandContext, |
| BeginRenderPassCmd* renderPass) { |
| ASSERT(renderPass != nullptr); |
| |
| for (uint32_t i : |
| IterateBitSet(renderPass->attachmentState->GetColorAttachmentsMask())) { |
| TextureViewBase* resolveTarget = |
| renderPass->colorAttachments[i].resolveTarget.Get(); |
| if (resolveTarget == nullptr) { |
| continue; |
| } |
| |
| Texture* colorTexture = |
| ToBackend(renderPass->colorAttachments[i].view->GetTexture()); |
| Texture* resolveTexture = ToBackend(resolveTarget->GetTexture()); |
| |
| // Transition the usages of the color attachment and resolve target. |
| colorTexture->TransitionUsageNow(commandContext, |
| D3D12_RESOURCE_STATE_RESOLVE_SOURCE); |
| resolveTexture->TransitionUsageNow(commandContext, |
| D3D12_RESOURCE_STATE_RESOLVE_DEST); |
| |
| // Do MSAA resolve with ResolveSubResource(). |
| ID3D12Resource* colorTextureHandle = colorTexture->GetD3D12Resource(); |
| ID3D12Resource* resolveTextureHandle = resolveTexture->GetD3D12Resource(); |
| const uint32_t resolveTextureSubresourceIndex = resolveTexture->GetSubresourceIndex( |
| resolveTarget->GetBaseMipLevel(), resolveTarget->GetBaseArrayLayer()); |
| constexpr uint32_t kColorTextureSubresourceIndex = 0; |
| commandContext->GetCommandList()->ResolveSubresource( |
| resolveTextureHandle, resolveTextureSubresourceIndex, colorTextureHandle, |
| kColorTextureSubresourceIndex, colorTexture->GetD3D12Format()); |
| } |
| } |
| |
| } // anonymous namespace |
| |
| CommandBuffer::CommandBuffer(CommandEncoderBase* encoder, |
| const CommandBufferDescriptor* descriptor) |
| : CommandBufferBase(encoder, descriptor), mCommands(encoder->AcquireCommands()) { |
| } |
| |
| CommandBuffer::~CommandBuffer() { |
| FreeCommands(&mCommands); |
| } |
| |
| MaybeError CommandBuffer::RecordCommands(CommandRecordingContext* commandContext, |
| uint32_t indexInSubmit) { |
| Device* device = ToBackend(GetDevice()); |
| BindGroupStateTracker bindingTracker(device); |
| RenderPassDescriptorHeapTracker renderPassTracker(device); |
| |
| ID3D12GraphicsCommandList* commandList = commandContext->GetCommandList(); |
| |
| // Precompute the allocation of bindgroups in descriptor heaps |
| // TODO(cwallez@chromium.org): Iterating over all the commands here is inefficient. We |
| // should have a system where commands and descriptors are recorded in parallel then the |
| // heaps set using a small CommandList inserted just before the main CommandList. |
| { |
| DAWN_TRY(AllocateAndSetDescriptorHeaps(device, &bindingTracker, &renderPassTracker, |
| &mCommands, indexInSubmit)); |
| bindingTracker.Reset(); |
| bindingTracker.SetID3D12DescriptorHeaps(commandList); |
| } |
| |
| // Records the necessary barriers for the resource usage pre-computed by the frontend |
| auto TransitionForPass = [](CommandRecordingContext* commandContext, |
| const PassResourceUsage& usages) { |
| std::vector<D3D12_RESOURCE_BARRIER> barriers; |
| |
| ID3D12GraphicsCommandList* commandList = commandContext->GetCommandList(); |
| |
| for (size_t i = 0; i < usages.buffers.size(); ++i) { |
| D3D12_RESOURCE_BARRIER barrier; |
| if (ToBackend(usages.buffers[i]) |
| ->TransitionUsageAndGetResourceBarrier(commandContext, &barrier, |
| usages.bufferUsages[i])) { |
| barriers.push_back(barrier); |
| } |
| } |
| |
| for (size_t i = 0; i < usages.textures.size(); ++i) { |
| Texture* texture = ToBackend(usages.textures[i]); |
| // Clear textures that are not output attachments. Output attachments will be |
| // cleared during record render pass if the texture subresource has not been |
| // initialized before the render pass. |
| if (!(usages.textureUsages[i] & wgpu::TextureUsage::OutputAttachment)) { |
| texture->EnsureSubresourceContentInitialized(commandContext, 0, |
| texture->GetNumMipLevels(), 0, |
| texture->GetArrayLayers()); |
| } |
| } |
| |
| for (size_t i = 0; i < usages.textures.size(); ++i) { |
| D3D12_RESOURCE_BARRIER barrier; |
| if (ToBackend(usages.textures[i]) |
| ->TransitionUsageAndGetResourceBarrier(commandContext, &barrier, |
| usages.textureUsages[i])) { |
| barriers.push_back(barrier); |
| } |
| } |
| |
| if (barriers.size()) { |
| commandList->ResourceBarrier(barriers.size(), barriers.data()); |
| } |
| }; |
| |
| const std::vector<PassResourceUsage>& passResourceUsages = GetResourceUsages().perPass; |
| uint32_t nextPassNumber = 0; |
| |
| Command type; |
| while (mCommands.NextCommandId(&type)) { |
| switch (type) { |
| case Command::BeginComputePass: { |
| mCommands.NextCommand<BeginComputePassCmd>(); |
| |
| TransitionForPass(commandContext, passResourceUsages[nextPassNumber]); |
| bindingTracker.SetInComputePass(true); |
| RecordComputePass(commandContext, &bindingTracker); |
| |
| nextPassNumber++; |
| } break; |
| |
| case Command::BeginRenderPass: { |
| BeginRenderPassCmd* beginRenderPassCmd = |
| mCommands.NextCommand<BeginRenderPassCmd>(); |
| |
| TransitionForPass(commandContext, passResourceUsages[nextPassNumber]); |
| bindingTracker.SetInComputePass(false); |
| RecordRenderPass(commandContext, &bindingTracker, &renderPassTracker, |
| beginRenderPassCmd); |
| |
| nextPassNumber++; |
| } break; |
| |
| case Command::CopyBufferToBuffer: { |
| CopyBufferToBufferCmd* copy = mCommands.NextCommand<CopyBufferToBufferCmd>(); |
| Buffer* srcBuffer = ToBackend(copy->source.Get()); |
| Buffer* dstBuffer = ToBackend(copy->destination.Get()); |
| |
| srcBuffer->TransitionUsageNow(commandContext, wgpu::BufferUsage::CopySrc); |
| dstBuffer->TransitionUsageNow(commandContext, wgpu::BufferUsage::CopyDst); |
| |
| commandList->CopyBufferRegion( |
| dstBuffer->GetD3D12Resource().Get(), copy->destinationOffset, |
| srcBuffer->GetD3D12Resource().Get(), copy->sourceOffset, copy->size); |
| } break; |
| |
| case Command::CopyBufferToTexture: { |
| CopyBufferToTextureCmd* copy = mCommands.NextCommand<CopyBufferToTextureCmd>(); |
| Buffer* buffer = ToBackend(copy->source.buffer.Get()); |
| Texture* texture = ToBackend(copy->destination.texture.Get()); |
| |
| if (IsCompleteSubresourceCopiedTo(texture, copy->copySize, |
| copy->destination.mipLevel)) { |
| texture->SetIsSubresourceContentInitialized( |
| true, copy->destination.mipLevel, 1, copy->destination.arrayLayer, 1); |
| } else { |
| texture->EnsureSubresourceContentInitialized( |
| commandContext, copy->destination.mipLevel, 1, |
| copy->destination.arrayLayer, 1); |
| } |
| |
| buffer->TransitionUsageNow(commandContext, wgpu::BufferUsage::CopySrc); |
| texture->TransitionUsageNow(commandContext, wgpu::TextureUsage::CopyDst); |
| |
| auto copySplit = ComputeTextureCopySplit( |
| copy->destination.origin, copy->copySize, texture->GetFormat(), |
| copy->source.offset, copy->source.rowPitch, copy->source.imageHeight); |
| |
| D3D12_TEXTURE_COPY_LOCATION textureLocation = |
| ComputeTextureCopyLocationForTexture(texture, copy->destination.mipLevel, |
| copy->destination.arrayLayer); |
| |
| for (uint32_t i = 0; i < copySplit.count; ++i) { |
| TextureCopySplit::CopyInfo& info = copySplit.copies[i]; |
| |
| D3D12_TEXTURE_COPY_LOCATION bufferLocation = |
| ComputeBufferLocationForCopyTextureRegion( |
| texture, buffer->GetD3D12Resource().Get(), info.bufferSize, |
| copySplit.offset, copy->source.rowPitch); |
| D3D12_BOX sourceRegion = |
| ComputeD3D12BoxFromOffsetAndSize(info.bufferOffset, info.copySize); |
| |
| commandList->CopyTextureRegion(&textureLocation, info.textureOffset.x, |
| info.textureOffset.y, info.textureOffset.z, |
| &bufferLocation, &sourceRegion); |
| } |
| } break; |
| |
| case Command::CopyTextureToBuffer: { |
| CopyTextureToBufferCmd* copy = mCommands.NextCommand<CopyTextureToBufferCmd>(); |
| Texture* texture = ToBackend(copy->source.texture.Get()); |
| Buffer* buffer = ToBackend(copy->destination.buffer.Get()); |
| |
| texture->EnsureSubresourceContentInitialized( |
| commandContext, copy->source.mipLevel, 1, copy->source.arrayLayer, 1); |
| |
| texture->TransitionUsageNow(commandContext, wgpu::TextureUsage::CopySrc); |
| buffer->TransitionUsageNow(commandContext, wgpu::BufferUsage::CopyDst); |
| |
| TextureCopySplit copySplit = ComputeTextureCopySplit( |
| copy->source.origin, copy->copySize, texture->GetFormat(), |
| copy->destination.offset, copy->destination.rowPitch, |
| copy->destination.imageHeight); |
| |
| D3D12_TEXTURE_COPY_LOCATION textureLocation = |
| ComputeTextureCopyLocationForTexture(texture, copy->source.mipLevel, |
| copy->source.arrayLayer); |
| |
| for (uint32_t i = 0; i < copySplit.count; ++i) { |
| TextureCopySplit::CopyInfo& info = copySplit.copies[i]; |
| |
| D3D12_TEXTURE_COPY_LOCATION bufferLocation = |
| ComputeBufferLocationForCopyTextureRegion( |
| texture, buffer->GetD3D12Resource().Get(), info.bufferSize, |
| copySplit.offset, copy->destination.rowPitch); |
| |
| D3D12_BOX sourceRegion = |
| ComputeD3D12BoxFromOffsetAndSize(info.textureOffset, info.copySize); |
| |
| commandList->CopyTextureRegion(&bufferLocation, info.bufferOffset.x, |
| info.bufferOffset.y, info.bufferOffset.z, |
| &textureLocation, &sourceRegion); |
| } |
| } break; |
| |
| case Command::CopyTextureToTexture: { |
| CopyTextureToTextureCmd* copy = |
| mCommands.NextCommand<CopyTextureToTextureCmd>(); |
| |
| Texture* source = ToBackend(copy->source.texture.Get()); |
| Texture* destination = ToBackend(copy->destination.texture.Get()); |
| |
| source->EnsureSubresourceContentInitialized( |
| commandContext, copy->source.mipLevel, 1, copy->source.arrayLayer, 1); |
| if (IsCompleteSubresourceCopiedTo(destination, copy->copySize, |
| copy->destination.mipLevel)) { |
| destination->SetIsSubresourceContentInitialized( |
| true, copy->destination.mipLevel, 1, copy->destination.arrayLayer, 1); |
| } else { |
| destination->EnsureSubresourceContentInitialized( |
| commandContext, copy->destination.mipLevel, 1, |
| copy->destination.arrayLayer, 1); |
| } |
| source->TransitionUsageNow(commandContext, wgpu::TextureUsage::CopySrc); |
| destination->TransitionUsageNow(commandContext, wgpu::TextureUsage::CopyDst); |
| |
| if (CanUseCopyResource(source->GetNumMipLevels(), source->GetSize(), |
| destination->GetSize(), copy->copySize)) { |
| commandList->CopyResource(destination->GetD3D12Resource(), |
| source->GetD3D12Resource()); |
| } else { |
| D3D12_TEXTURE_COPY_LOCATION srcLocation = |
| ComputeTextureCopyLocationForTexture(source, copy->source.mipLevel, |
| copy->source.arrayLayer); |
| |
| D3D12_TEXTURE_COPY_LOCATION dstLocation = |
| ComputeTextureCopyLocationForTexture(destination, |
| copy->destination.mipLevel, |
| copy->destination.arrayLayer); |
| |
| D3D12_BOX sourceRegion = |
| ComputeD3D12BoxFromOffsetAndSize(copy->source.origin, copy->copySize); |
| |
| commandList->CopyTextureRegion( |
| &dstLocation, copy->destination.origin.x, copy->destination.origin.y, |
| copy->destination.origin.z, &srcLocation, &sourceRegion); |
| } |
| } break; |
| |
| default: { UNREACHABLE(); } break; |
| } |
| } |
| |
| DAWN_ASSERT(renderPassTracker.IsHeapAllocationCompleted()); |
| return {}; |
| } |
| |
| void CommandBuffer::RecordComputePass(CommandRecordingContext* commandContext, |
| BindGroupStateTracker* bindingTracker) { |
| PipelineLayout* lastLayout = nullptr; |
| ID3D12GraphicsCommandList* commandList = commandContext->GetCommandList(); |
| |
| Command type; |
| while (mCommands.NextCommandId(&type)) { |
| switch (type) { |
| case Command::Dispatch: { |
| DispatchCmd* dispatch = mCommands.NextCommand<DispatchCmd>(); |
| |
| bindingTracker->Apply(commandContext); |
| commandList->Dispatch(dispatch->x, dispatch->y, dispatch->z); |
| } break; |
| |
| case Command::DispatchIndirect: { |
| DispatchIndirectCmd* dispatch = mCommands.NextCommand<DispatchIndirectCmd>(); |
| |
| bindingTracker->Apply(commandContext); |
| Buffer* buffer = ToBackend(dispatch->indirectBuffer.Get()); |
| ComPtr<ID3D12CommandSignature> signature = |
| ToBackend(GetDevice())->GetDispatchIndirectSignature(); |
| commandList->ExecuteIndirect(signature.Get(), 1, |
| buffer->GetD3D12Resource().Get(), |
| dispatch->indirectOffset, nullptr, 0); |
| } break; |
| |
| case Command::EndComputePass: { |
| mCommands.NextCommand<EndComputePassCmd>(); |
| return; |
| } break; |
| |
| case Command::SetComputePipeline: { |
| SetComputePipelineCmd* cmd = mCommands.NextCommand<SetComputePipelineCmd>(); |
| ComputePipeline* pipeline = ToBackend(cmd->pipeline).Get(); |
| PipelineLayout* layout = ToBackend(pipeline->GetLayout()); |
| |
| commandList->SetComputeRootSignature(layout->GetRootSignature().Get()); |
| commandList->SetPipelineState(pipeline->GetPipelineState().Get()); |
| |
| bindingTracker->OnSetPipeline(pipeline); |
| |
| lastLayout = layout; |
| } break; |
| |
| case Command::SetBindGroup: { |
| SetBindGroupCmd* cmd = mCommands.NextCommand<SetBindGroupCmd>(); |
| BindGroup* group = ToBackend(cmd->group.Get()); |
| uint32_t* dynamicOffsets = nullptr; |
| |
| if (cmd->dynamicOffsetCount > 0) { |
| dynamicOffsets = mCommands.NextData<uint32_t>(cmd->dynamicOffsetCount); |
| } |
| |
| bindingTracker->OnSetBindGroup(cmd->index, group, cmd->dynamicOffsetCount, |
| dynamicOffsets); |
| } break; |
| |
| case Command::InsertDebugMarker: { |
| InsertDebugMarkerCmd* cmd = mCommands.NextCommand<InsertDebugMarkerCmd>(); |
| const char* label = mCommands.NextData<char>(cmd->length + 1); |
| |
| if (ToBackend(GetDevice())->GetFunctions()->IsPIXEventRuntimeLoaded()) { |
| // PIX color is 1 byte per channel in ARGB format |
| constexpr uint64_t kPIXBlackColor = 0xff000000; |
| ToBackend(GetDevice()) |
| ->GetFunctions() |
| ->pixSetMarkerOnCommandList(commandList, kPIXBlackColor, label); |
| } |
| } break; |
| |
| case Command::PopDebugGroup: { |
| mCommands.NextCommand<PopDebugGroupCmd>(); |
| |
| if (ToBackend(GetDevice())->GetFunctions()->IsPIXEventRuntimeLoaded()) { |
| ToBackend(GetDevice()) |
| ->GetFunctions() |
| ->pixEndEventOnCommandList(commandList); |
| } |
| } break; |
| |
| case Command::PushDebugGroup: { |
| PushDebugGroupCmd* cmd = mCommands.NextCommand<PushDebugGroupCmd>(); |
| const char* label = mCommands.NextData<char>(cmd->length + 1); |
| |
| if (ToBackend(GetDevice())->GetFunctions()->IsPIXEventRuntimeLoaded()) { |
| // PIX color is 1 byte per channel in ARGB format |
| constexpr uint64_t kPIXBlackColor = 0xff000000; |
| ToBackend(GetDevice()) |
| ->GetFunctions() |
| ->pixBeginEventOnCommandList(commandList, kPIXBlackColor, label); |
| } |
| } break; |
| |
| default: { UNREACHABLE(); } break; |
| } |
| } |
| } |
| |
| void CommandBuffer::RecordRenderPass(CommandRecordingContext* commandContext, |
| BindGroupStateTracker* bindingTracker, |
| RenderPassDescriptorHeapTracker* renderPassTracker, |
| BeginRenderPassCmd* renderPass) { |
| OMSetRenderTargetArgs args = renderPassTracker->GetSubpassOMSetRenderTargetArgs(renderPass); |
| ID3D12GraphicsCommandList* commandList = commandContext->GetCommandList(); |
| |
| // Clear framebuffer attachments as needed and transition to render target |
| { |
| for (uint32_t i : |
| IterateBitSet(renderPass->attachmentState->GetColorAttachmentsMask())) { |
| auto& attachmentInfo = renderPass->colorAttachments[i]; |
| TextureView* view = ToBackend(attachmentInfo.view.Get()); |
| |
| // Load op - color |
| ASSERT(view->GetLevelCount() == 1); |
| ASSERT(view->GetLayerCount() == 1); |
| if (attachmentInfo.loadOp == wgpu::LoadOp::Clear || |
| (attachmentInfo.loadOp == wgpu::LoadOp::Load && |
| !view->GetTexture()->IsSubresourceContentInitialized( |
| view->GetBaseMipLevel(), 1, view->GetBaseArrayLayer(), 1))) { |
| D3D12_CPU_DESCRIPTOR_HANDLE handle = args.RTVs[i]; |
| commandList->ClearRenderTargetView(handle, &attachmentInfo.clearColor.r, 0, |
| nullptr); |
| } |
| |
| TextureView* resolveView = ToBackend(attachmentInfo.resolveTarget.Get()); |
| if (resolveView != nullptr) { |
| // We need to set the resolve target to initialized so that it does not get |
| // cleared later in the pipeline. The texture will be resolved from the source |
| // color attachment, which will be correctly initialized. |
| ToBackend(resolveView->GetTexture()) |
| ->SetIsSubresourceContentInitialized( |
| true, resolveView->GetBaseMipLevel(), resolveView->GetLevelCount(), |
| resolveView->GetBaseArrayLayer(), resolveView->GetLayerCount()); |
| } |
| |
| switch (attachmentInfo.storeOp) { |
| case wgpu::StoreOp::Store: { |
| view->GetTexture()->SetIsSubresourceContentInitialized( |
| true, view->GetBaseMipLevel(), 1, view->GetBaseArrayLayer(), 1); |
| } break; |
| |
| case wgpu::StoreOp::Clear: { |
| view->GetTexture()->SetIsSubresourceContentInitialized( |
| false, view->GetBaseMipLevel(), 1, view->GetBaseArrayLayer(), 1); |
| } break; |
| |
| default: { UNREACHABLE(); } break; |
| } |
| } |
| |
| if (renderPass->attachmentState->HasDepthStencilAttachment()) { |
| auto& attachmentInfo = renderPass->depthStencilAttachment; |
| Texture* texture = ToBackend(renderPass->depthStencilAttachment.view->GetTexture()); |
| TextureView* view = ToBackend(attachmentInfo.view.Get()); |
| float clearDepth = attachmentInfo.clearDepth; |
| // TODO(kainino@chromium.org): investigate: should the Dawn clear |
| // stencil type be uint8_t? |
| uint8_t clearStencil = static_cast<uint8_t>(attachmentInfo.clearStencil); |
| |
| // Load op - depth/stencil |
| bool doDepthClear = texture->GetFormat().HasDepth() && |
| (attachmentInfo.depthLoadOp == wgpu::LoadOp::Clear); |
| bool doStencilClear = texture->GetFormat().HasStencil() && |
| (attachmentInfo.stencilLoadOp == wgpu::LoadOp::Clear); |
| |
| D3D12_CLEAR_FLAGS clearFlags = {}; |
| if (doDepthClear) { |
| clearFlags |= D3D12_CLEAR_FLAG_DEPTH; |
| } |
| if (doStencilClear) { |
| clearFlags |= D3D12_CLEAR_FLAG_STENCIL; |
| } |
| // If the depth stencil texture has not been initialized, we want to use loadop |
| // clear to init the contents to 0's |
| if (!texture->IsSubresourceContentInitialized( |
| view->GetBaseMipLevel(), view->GetLevelCount(), view->GetBaseArrayLayer(), |
| view->GetLayerCount())) { |
| if (texture->GetFormat().HasDepth() && |
| attachmentInfo.depthLoadOp == wgpu::LoadOp::Load) { |
| clearDepth = 0.0f; |
| clearFlags |= D3D12_CLEAR_FLAG_DEPTH; |
| } |
| if (texture->GetFormat().HasStencil() && |
| attachmentInfo.stencilLoadOp == wgpu::LoadOp::Load) { |
| clearStencil = 0u; |
| clearFlags |= D3D12_CLEAR_FLAG_STENCIL; |
| } |
| } |
| |
| if (clearFlags) { |
| D3D12_CPU_DESCRIPTOR_HANDLE handle = args.dsv; |
| commandList->ClearDepthStencilView(handle, clearFlags, clearDepth, clearStencil, |
| 0, nullptr); |
| } |
| |
| if (attachmentInfo.depthStoreOp == wgpu::StoreOp::Store && |
| attachmentInfo.stencilStoreOp == wgpu::StoreOp::Store) { |
| texture->SetIsSubresourceContentInitialized( |
| true, view->GetBaseMipLevel(), view->GetLevelCount(), |
| view->GetBaseArrayLayer(), view->GetLayerCount()); |
| } else if (attachmentInfo.depthStoreOp == wgpu::StoreOp::Clear && |
| attachmentInfo.stencilStoreOp == wgpu::StoreOp::Clear) { |
| texture->SetIsSubresourceContentInitialized( |
| false, view->GetBaseMipLevel(), view->GetLevelCount(), |
| view->GetBaseArrayLayer(), view->GetLayerCount()); |
| } |
| } |
| } |
| |
| // Set up render targets |
| { |
| if (args.dsv.ptr) { |
| commandList->OMSetRenderTargets(args.numRTVs, args.RTVs.data(), FALSE, &args.dsv); |
| } else { |
| commandList->OMSetRenderTargets(args.numRTVs, args.RTVs.data(), FALSE, nullptr); |
| } |
| } |
| |
| // Set up default dynamic state |
| { |
| uint32_t width = renderPass->width; |
| uint32_t height = renderPass->height; |
| D3D12_VIEWPORT viewport = { |
| 0.f, 0.f, static_cast<float>(width), static_cast<float>(height), 0.f, 1.f}; |
| D3D12_RECT scissorRect = {0, 0, static_cast<long>(width), static_cast<long>(height)}; |
| commandList->RSSetViewports(1, &viewport); |
| commandList->RSSetScissorRects(1, &scissorRect); |
| |
| static constexpr std::array<float, 4> defaultBlendFactor = {0, 0, 0, 0}; |
| commandList->OMSetBlendFactor(&defaultBlendFactor[0]); |
| } |
| |
| RenderPipeline* lastPipeline = nullptr; |
| PipelineLayout* lastLayout = nullptr; |
| VertexBufferTracker vertexBufferTracker = {}; |
| IndexBufferTracker indexBufferTracker = {}; |
| |
| auto EncodeRenderBundleCommand = [&](CommandIterator* iter, Command type) { |
| switch (type) { |
| case Command::Draw: { |
| DrawCmd* draw = iter->NextCommand<DrawCmd>(); |
| |
| bindingTracker->Apply(commandContext); |
| vertexBufferTracker.Apply(commandList, lastPipeline); |
| commandList->DrawInstanced(draw->vertexCount, draw->instanceCount, |
| draw->firstVertex, draw->firstInstance); |
| } break; |
| |
| case Command::DrawIndexed: { |
| DrawIndexedCmd* draw = iter->NextCommand<DrawIndexedCmd>(); |
| |
| bindingTracker->Apply(commandContext); |
| indexBufferTracker.Apply(commandList); |
| vertexBufferTracker.Apply(commandList, lastPipeline); |
| commandList->DrawIndexedInstanced(draw->indexCount, draw->instanceCount, |
| draw->firstIndex, draw->baseVertex, |
| draw->firstInstance); |
| } break; |
| |
| case Command::DrawIndirect: { |
| DrawIndirectCmd* draw = iter->NextCommand<DrawIndirectCmd>(); |
| |
| bindingTracker->Apply(commandContext); |
| vertexBufferTracker.Apply(commandList, lastPipeline); |
| Buffer* buffer = ToBackend(draw->indirectBuffer.Get()); |
| ComPtr<ID3D12CommandSignature> signature = |
| ToBackend(GetDevice())->GetDrawIndirectSignature(); |
| commandList->ExecuteIndirect(signature.Get(), 1, |
| buffer->GetD3D12Resource().Get(), |
| draw->indirectOffset, nullptr, 0); |
| } break; |
| |
| case Command::DrawIndexedIndirect: { |
| DrawIndexedIndirectCmd* draw = iter->NextCommand<DrawIndexedIndirectCmd>(); |
| |
| bindingTracker->Apply(commandContext); |
| indexBufferTracker.Apply(commandList); |
| vertexBufferTracker.Apply(commandList, lastPipeline); |
| Buffer* buffer = ToBackend(draw->indirectBuffer.Get()); |
| ComPtr<ID3D12CommandSignature> signature = |
| ToBackend(GetDevice())->GetDrawIndexedIndirectSignature(); |
| commandList->ExecuteIndirect(signature.Get(), 1, |
| buffer->GetD3D12Resource().Get(), |
| draw->indirectOffset, nullptr, 0); |
| } break; |
| |
| case Command::InsertDebugMarker: { |
| InsertDebugMarkerCmd* cmd = iter->NextCommand<InsertDebugMarkerCmd>(); |
| const char* label = iter->NextData<char>(cmd->length + 1); |
| |
| if (ToBackend(GetDevice())->GetFunctions()->IsPIXEventRuntimeLoaded()) { |
| // PIX color is 1 byte per channel in ARGB format |
| constexpr uint64_t kPIXBlackColor = 0xff000000; |
| ToBackend(GetDevice()) |
| ->GetFunctions() |
| ->pixSetMarkerOnCommandList(commandList, kPIXBlackColor, label); |
| } |
| } break; |
| |
| case Command::PopDebugGroup: { |
| iter->NextCommand<PopDebugGroupCmd>(); |
| |
| if (ToBackend(GetDevice())->GetFunctions()->IsPIXEventRuntimeLoaded()) { |
| ToBackend(GetDevice()) |
| ->GetFunctions() |
| ->pixEndEventOnCommandList(commandList); |
| } |
| } break; |
| |
| case Command::PushDebugGroup: { |
| PushDebugGroupCmd* cmd = iter->NextCommand<PushDebugGroupCmd>(); |
| const char* label = iter->NextData<char>(cmd->length + 1); |
| |
| if (ToBackend(GetDevice())->GetFunctions()->IsPIXEventRuntimeLoaded()) { |
| // PIX color is 1 byte per channel in ARGB format |
| constexpr uint64_t kPIXBlackColor = 0xff000000; |
| ToBackend(GetDevice()) |
| ->GetFunctions() |
| ->pixBeginEventOnCommandList(commandList, kPIXBlackColor, label); |
| } |
| } break; |
| |
| case Command::SetRenderPipeline: { |
| SetRenderPipelineCmd* cmd = iter->NextCommand<SetRenderPipelineCmd>(); |
| RenderPipeline* pipeline = ToBackend(cmd->pipeline).Get(); |
| PipelineLayout* layout = ToBackend(pipeline->GetLayout()); |
| |
| commandList->SetGraphicsRootSignature(layout->GetRootSignature().Get()); |
| commandList->SetPipelineState(pipeline->GetPipelineState().Get()); |
| commandList->IASetPrimitiveTopology(pipeline->GetD3D12PrimitiveTopology()); |
| |
| bindingTracker->OnSetPipeline(pipeline); |
| indexBufferTracker.OnSetPipeline(pipeline); |
| |
| lastPipeline = pipeline; |
| lastLayout = layout; |
| } break; |
| |
| case Command::SetBindGroup: { |
| SetBindGroupCmd* cmd = iter->NextCommand<SetBindGroupCmd>(); |
| BindGroup* group = ToBackend(cmd->group.Get()); |
| uint32_t* dynamicOffsets = nullptr; |
| |
| if (cmd->dynamicOffsetCount > 0) { |
| dynamicOffsets = iter->NextData<uint32_t>(cmd->dynamicOffsetCount); |
| } |
| |
| bindingTracker->OnSetBindGroup(cmd->index, group, cmd->dynamicOffsetCount, |
| dynamicOffsets); |
| } break; |
| |
| case Command::SetIndexBuffer: { |
| SetIndexBufferCmd* cmd = iter->NextCommand<SetIndexBufferCmd>(); |
| |
| indexBufferTracker.OnSetIndexBuffer(ToBackend(cmd->buffer.Get()), cmd->offset); |
| } break; |
| |
| case Command::SetVertexBuffer: { |
| SetVertexBufferCmd* cmd = iter->NextCommand<SetVertexBufferCmd>(); |
| |
| vertexBufferTracker.OnSetVertexBuffer(cmd->slot, ToBackend(cmd->buffer.Get()), |
| cmd->offset); |
| } break; |
| |
| default: |
| UNREACHABLE(); |
| break; |
| } |
| }; |
| |
| Command type; |
| while (mCommands.NextCommandId(&type)) { |
| switch (type) { |
| case Command::EndRenderPass: { |
| mCommands.NextCommand<EndRenderPassCmd>(); |
| |
| // TODO(brandon1.jones@intel.com): avoid calling this function and enable MSAA |
| // resolve in D3D12 render pass on the platforms that support this feature. |
| if (renderPass->attachmentState->GetSampleCount() > 1) { |
| ResolveMultisampledRenderPass(commandContext, renderPass); |
| } |
| return; |
| } break; |
| |
| case Command::SetStencilReference: { |
| SetStencilReferenceCmd* cmd = mCommands.NextCommand<SetStencilReferenceCmd>(); |
| |
| commandList->OMSetStencilRef(cmd->reference); |
| } break; |
| |
| case Command::SetViewport: { |
| SetViewportCmd* cmd = mCommands.NextCommand<SetViewportCmd>(); |
| D3D12_VIEWPORT viewport; |
| viewport.TopLeftX = cmd->x; |
| viewport.TopLeftY = cmd->y; |
| viewport.Width = cmd->width; |
| viewport.Height = cmd->height; |
| viewport.MinDepth = cmd->minDepth; |
| viewport.MaxDepth = cmd->maxDepth; |
| |
| commandList->RSSetViewports(1, &viewport); |
| } break; |
| |
| case Command::SetScissorRect: { |
| SetScissorRectCmd* cmd = mCommands.NextCommand<SetScissorRectCmd>(); |
| D3D12_RECT rect; |
| rect.left = cmd->x; |
| rect.top = cmd->y; |
| rect.right = cmd->x + cmd->width; |
| rect.bottom = cmd->y + cmd->height; |
| |
| commandList->RSSetScissorRects(1, &rect); |
| } break; |
| |
| case Command::SetBlendColor: { |
| SetBlendColorCmd* cmd = mCommands.NextCommand<SetBlendColorCmd>(); |
| commandList->OMSetBlendFactor(static_cast<const FLOAT*>(&cmd->color.r)); |
| } break; |
| |
| case Command::ExecuteBundles: { |
| ExecuteBundlesCmd* cmd = mCommands.NextCommand<ExecuteBundlesCmd>(); |
| auto bundles = mCommands.NextData<Ref<RenderBundleBase>>(cmd->count); |
| |
| for (uint32_t i = 0; i < cmd->count; ++i) { |
| CommandIterator* iter = bundles[i]->GetCommands(); |
| iter->Reset(); |
| while (iter->NextCommandId(&type)) { |
| EncodeRenderBundleCommand(iter, type); |
| } |
| } |
| } break; |
| |
| default: { EncodeRenderBundleCommand(&mCommands, type); } break; |
| } |
| } |
| } |
| |
| }} // namespace dawn_native::d3d12 |
