// Copyright 2019 The Dawn Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#include "dawn/native/metal/UtilsMetal.h"

#include "dawn/common/Assert.h"
#include "dawn/native/CommandBuffer.h"
#include "dawn/native/Pipeline.h"
#include "dawn/native/ShaderModule.h"

namespace dawn::native::metal {

namespace {
// A helper struct to track state while doing workarounds for Metal render passes. It
// contains a temporary texture and information about the attachment it replaces.
// Helper methods encode copies between the two textures.
struct SavedMetalAttachment {
    id<MTLTexture> texture = nil;
    NSUInteger level;
    NSUInteger slice;

    NSPRef<id<MTLTexture>> temporary;

    void CopyFromTemporaryToAttachment(CommandRecordingContext* commandContext) {
        [commandContext->EnsureBlit()
              copyFromTexture:temporary.Get()
                  sourceSlice:0
                  sourceLevel:0
                 sourceOrigin:MTLOriginMake(0, 0, 0)
                   sourceSize:MTLSizeMake([temporary.Get() width], [temporary.Get() height], 1)
                    toTexture:texture
             destinationSlice:slice
             destinationLevel:level
            destinationOrigin:MTLOriginMake(0, 0, 0)];
    }

    void CopyFromAttachmentToTemporary(CommandRecordingContext* commandContext) {
        [commandContext->EnsureBlit()
              copyFromTexture:texture
                  sourceSlice:slice
                  sourceLevel:level
                 sourceOrigin:MTLOriginMake(0, 0, 0)
                   sourceSize:MTLSizeMake([temporary.Get() width], [temporary.Get() height], 1)
                    toTexture:temporary.Get()
             destinationSlice:0
             destinationLevel:0
            destinationOrigin:MTLOriginMake(0, 0, 0)];
    }
};

// Common code between both kinds of attachments swaps.
ResultOrError<SavedMetalAttachment> SaveAttachmentCreateTemporary(Device* device,
                                                                  id<MTLTexture> attachmentTexture,
                                                                  NSUInteger attachmentLevel,
                                                                  NSUInteger attachmentSlice) {
    // Save the attachment.
    SavedMetalAttachment result;
    result.texture = attachmentTexture;
    result.level = attachmentLevel;
    result.slice = attachmentSlice;

    // Create the temporary texture.
    NSRef<MTLTextureDescriptor> mtlDescRef = AcquireNSRef([MTLTextureDescriptor new]);
    MTLTextureDescriptor* mtlDesc = mtlDescRef.Get();

    mtlDesc.textureType = MTLTextureType2D;
    mtlDesc.usage = MTLTextureUsageRenderTarget;
    mtlDesc.pixelFormat = [result.texture pixelFormat];
    mtlDesc.width = std::max([result.texture width] >> attachmentLevel, NSUInteger(1));
    mtlDesc.height = std::max([result.texture height] >> attachmentLevel, NSUInteger(1));
    mtlDesc.depth = 1;
    mtlDesc.mipmapLevelCount = 1;
    mtlDesc.arrayLength = 1;
    mtlDesc.storageMode = MTLStorageModePrivate;
    mtlDesc.sampleCount = [result.texture sampleCount];

    result.temporary = AcquireNSPRef([device->GetMTLDevice() newTextureWithDescriptor:mtlDesc]);
    if (result.temporary == nil) {
        return DAWN_OUT_OF_MEMORY_ERROR("Allocation of temporary texture failed.");
    }

    return result;
}

// Patches the render pass attachment to replace it with a temporary texture. Returns a
// SavedMetalAttachment that can be used to easily copy between the original attachment and
// the temporary.
ResultOrError<SavedMetalAttachment> PatchAttachmentWithTemporary(
    Device* device,
    MTLRenderPassAttachmentDescriptor* attachment) {
    SavedMetalAttachment result;
    DAWN_TRY_ASSIGN(result, SaveAttachmentCreateTemporary(device, attachment.texture,
                                                          attachment.level, attachment.slice));

    // Replace the attachment with the temporary
    attachment.texture = result.temporary.Get();
    attachment.level = 0;
    attachment.slice = 0;

    return result;
}

// Helper function for Toggle EmulateStoreAndMSAAResolve
void ResolveInAnotherRenderPass(
    CommandRecordingContext* commandContext,
    const MTLRenderPassDescriptor* mtlRenderPass,
    const std::array<id<MTLTexture>, kMaxColorAttachments>& resolveTextures) {
    // Note that this creates a descriptor that's autoreleased so we don't use AcquireNSRef
    NSRef<MTLRenderPassDescriptor> mtlRenderPassForResolveRef =
        [MTLRenderPassDescriptor renderPassDescriptor];
    MTLRenderPassDescriptor* mtlRenderPassForResolve = mtlRenderPassForResolveRef.Get();

    for (uint32_t i = 0; i < kMaxColorAttachments; ++i) {
        if (resolveTextures[i] == nullptr) {
            continue;
        }

        mtlRenderPassForResolve.colorAttachments[i].texture =
            mtlRenderPass.colorAttachments[i].texture;
        mtlRenderPassForResolve.colorAttachments[i].loadAction = MTLLoadActionLoad;
        mtlRenderPassForResolve.colorAttachments[i].storeAction = MTLStoreActionMultisampleResolve;
        mtlRenderPassForResolve.colorAttachments[i].resolveTexture = resolveTextures[i];
        mtlRenderPassForResolve.colorAttachments[i].resolveLevel =
            mtlRenderPass.colorAttachments[i].resolveLevel;
        mtlRenderPassForResolve.colorAttachments[i].resolveSlice =
            mtlRenderPass.colorAttachments[i].resolveSlice;
    }

    commandContext->BeginRender(mtlRenderPassForResolve);
    commandContext->EndRender();
}
}  // anonymous namespace

MTLCompareFunction ToMetalCompareFunction(wgpu::CompareFunction compareFunction) {
    switch (compareFunction) {
        case wgpu::CompareFunction::Never:
            return MTLCompareFunctionNever;
        case wgpu::CompareFunction::Less:
            return MTLCompareFunctionLess;
        case wgpu::CompareFunction::LessEqual:
            return MTLCompareFunctionLessEqual;
        case wgpu::CompareFunction::Greater:
            return MTLCompareFunctionGreater;
        case wgpu::CompareFunction::GreaterEqual:
            return MTLCompareFunctionGreaterEqual;
        case wgpu::CompareFunction::NotEqual:
            return MTLCompareFunctionNotEqual;
        case wgpu::CompareFunction::Equal:
            return MTLCompareFunctionEqual;
        case wgpu::CompareFunction::Always:
            return MTLCompareFunctionAlways;

        case wgpu::CompareFunction::Undefined:
            UNREACHABLE();
    }
}

TextureBufferCopySplit ComputeTextureBufferCopySplit(const Texture* texture,
                                                     uint32_t mipLevel,
                                                     Origin3D origin,
                                                     Extent3D copyExtent,
                                                     uint64_t bufferSize,
                                                     uint64_t bufferOffset,
                                                     uint32_t bytesPerRow,
                                                     uint32_t rowsPerImage,
                                                     Aspect aspect) {
    TextureBufferCopySplit copy;
    const Format textureFormat = texture->GetFormat();
    const TexelBlockInfo& blockInfo = textureFormat.GetAspectInfo(aspect).block;

    // When copying textures from/to an unpacked buffer, the Metal validation layer has 3
    // issues.
    //
    // 1. The metal validation layer doesn't compute the correct range when checking if the
    // buffer is big enough to contain the data for the whole copy. Instead of looking at
    // the position of the last texel in the buffer, it computes the volume of the 3D box
    // with bytesPerRow * (rowsPerImage / format.blockHeight) * copySize.depthOrArrayLayers.
    // For example considering the pixel buffer below where in memory, each row data (D) of
    // the texture is followed by some
    // padding data (P):
    //     |DDDDDDD|PP|
    //     |DDDDDDD|PP|
    //     |DDDDDDD|PP|
    //     |DDDDDDD|PP|
    //     |DDDDDDA|PP|
    // The last pixel read will be A, but the driver will think it is the whole last padding
    // row, causing it to generate an error when the pixel buffer is just big enough.

    // We work around this limitation by detecting when Metal would complain and copy the
    // last image and row separately using tight sourceBytesPerRow or sourceBytesPerImage.

    // 2. Metal requires `destinationBytesPerRow` is less than or equal to the size
    // of the maximum texture dimension in bytes.

    // 3. Some Metal Drivers (Intel Pre MacOS 13.1?) Incorrectly calculation the size
    // needed for the destination buffer. Their calculation is something like
    //
    //   sizeNeeded = bufferOffset + desintationBytesPerImage * numImages +
    //                destinationBytesPerRow * (numRows - 1) +
    //                bytesPerPixel * width
    //
    // where as it should be
    //
    //   sizeNeeded = bufferOffset + desintationBytesPerImage * (numImages - 1) +
    //                destinationBytesPerRow * (numRows - 1) +
    //                bytesPerPixel * width
    //
    // since you won't actually go to the next image if there is only 1 image.
    //
    // The workaround is if you're only copying a single row then pass 0 for
    // destinationBytesPerImage

    uint32_t bytesPerImage = bytesPerRow * rowsPerImage;

    // Metal validation layer requires that if the texture's pixel format is a compressed
    // format, the sourceSize must be a multiple of the pixel format's block size or be
    // clamped to the edge of the texture if the block extends outside the bounds of a
    // texture.
    const Extent3D clampedCopyExtent =
        texture->ClampToMipLevelVirtualSize(mipLevel, origin, copyExtent);

    // Note: all current GPUs have a 3D texture size limit of 2048 and otherwise 16348
    // for non-3D textures except for Apple2 GPUs (iPhone6) which has a non-3D texture
    // limit of 8192. Dawn doesn't support Apple2 GPUs
    // See: https://developer.apple.com/metal/Metal-Feature-Set-Tables.pdf
    const uint32_t kMetalMax3DTextureDimensions = 2048u;
    const uint32_t kMetalMaxNon3DTextureDimensions = 16384u;
    uint32_t maxTextureDimension = texture->GetDimension() == wgpu::TextureDimension::e3D
                                       ? kMetalMax3DTextureDimensions
                                       : kMetalMaxNon3DTextureDimensions;
    uint32_t bytesPerPixel = blockInfo.byteSize;
    uint32_t maxBytesPerRow = maxTextureDimension * bytesPerPixel;

    bool needCopyRowByRow = bytesPerRow > maxBytesPerRow;
    if (needCopyRowByRow) {
        // handle workaround case 2
        // Since we're copying a row at a time bytesPerRow shouldn't matter but just to
        // try to have it make sense, pass correct or max valid value
        const uint32_t localBytesPerRow = std::min(bytesPerRow, maxBytesPerRow);
        const uint32_t localBytesPerImage = 0;  // workaround case 3
        ASSERT(copyExtent.height % blockInfo.height == 0);
        ASSERT(copyExtent.width % blockInfo.width == 0);
        const uint32_t blockRows = copyExtent.height / blockInfo.height;
        for (uint32_t slice = 0; slice < copyExtent.depthOrArrayLayers; ++slice) {
            for (uint32_t blockRow = 0; blockRow < blockRows; ++blockRow) {
                copy.push_back(TextureBufferCopySplit::CopyInfo(
                    bufferOffset + slice * rowsPerImage * bytesPerRow + blockRow * bytesPerRow,
                    localBytesPerRow, localBytesPerImage,
                    {origin.x, origin.y + blockRow * blockInfo.height, origin.z + slice},
                    {clampedCopyExtent.width, blockInfo.height, 1}));
            }
        }
        return copy;
    }

    // Check whether buffer size is big enough.
    bool needCopyLastImageAndLastRowSeparately =
        bufferSize - bufferOffset < bytesPerImage * copyExtent.depthOrArrayLayers;
    if (!needCopyLastImageAndLastRowSeparately) {
        const uint32_t localBytesPerImage =
            copyExtent.depthOrArrayLayers == 1 ? 0 : bytesPerImage;  // workaround case 3
        copy.push_back(TextureBufferCopySplit::CopyInfo(
            bufferOffset, bytesPerRow, localBytesPerImage, origin,
            {clampedCopyExtent.width, clampedCopyExtent.height, copyExtent.depthOrArrayLayers}));
        return copy;
    }

    // handle workaround case 1
    uint64_t currentOffset = bufferOffset;

    // Doing all the copy except the last image.
    if (copyExtent.depthOrArrayLayers > 1) {
        const uint32_t localDepthOrArrayLayers = copyExtent.depthOrArrayLayers - 1;
        const uint32_t localBytesPerImage =
            localDepthOrArrayLayers == 1 ? 0 : bytesPerImage;  // workaround case 3
        copy.push_back(TextureBufferCopySplit::CopyInfo(
            currentOffset, bytesPerRow, localBytesPerImage, origin,
            {clampedCopyExtent.width, clampedCopyExtent.height, localDepthOrArrayLayers}));
        // Update offset to copy to the last image.
        currentOffset += (copyExtent.depthOrArrayLayers - 1) * bytesPerImage;
    }

    // Doing all the copy in last image except the last row.
    uint32_t copyBlockRowCount = copyExtent.height / blockInfo.height;
    if (copyBlockRowCount > 1) {
        ASSERT(copyExtent.height - blockInfo.height <
               texture->GetMipLevelSingleSubresourceVirtualSize(mipLevel).height);
        const uint32_t localBytesPerImage = 0;  // workaround case 3
        copy.push_back(TextureBufferCopySplit::CopyInfo(
            currentOffset, bytesPerRow, localBytesPerImage,
            {origin.x, origin.y, origin.z + copyExtent.depthOrArrayLayers - 1},
            {clampedCopyExtent.width, copyExtent.height - blockInfo.height, 1}));

        // Update offset to copy to the last row.
        currentOffset += (copyBlockRowCount - 1) * bytesPerRow;
    }

    // Doing the last row copy with the exact number of bytes in last row.
    // Workaround this issue in a way just like the copy to a 1D texture.
    uint32_t lastRowDataSize = (copyExtent.width / blockInfo.width) * blockInfo.byteSize;
    uint32_t lastImageDataSize = 0;  // workaround case 3
    uint32_t lastRowCopyExtentHeight =
        blockInfo.height + clampedCopyExtent.height - copyExtent.height;
    ASSERT(lastRowCopyExtentHeight <= blockInfo.height);

    copy.push_back(
        TextureBufferCopySplit::CopyInfo(currentOffset, lastRowDataSize, lastImageDataSize,
                                         {origin.x, origin.y + copyExtent.height - blockInfo.height,
                                          origin.z + copyExtent.depthOrArrayLayers - 1},
                                         {clampedCopyExtent.width, lastRowCopyExtentHeight, 1}));

    return copy;
}

void EnsureDestinationTextureInitialized(CommandRecordingContext* commandContext,
                                         Texture* texture,
                                         const TextureCopy& dst,
                                         const Extent3D& size) {
    ASSERT(texture == dst.texture.Get());
    SubresourceRange range = GetSubresourcesAffectedByCopy(dst, size);
    if (IsCompleteSubresourceCopiedTo(dst.texture.Get(), size, dst.mipLevel)) {
        texture->SetIsSubresourceContentInitialized(true, range);
    } else {
        texture->EnsureSubresourceContentInitialized(commandContext, range);
    }
}

MaybeError EncodeMetalRenderPass(Device* device,
                                 CommandRecordingContext* commandContext,
                                 MTLRenderPassDescriptor* mtlRenderPass,
                                 uint32_t width,
                                 uint32_t height,
                                 EncodeInsideRenderPass encodeInside,
                                 BeginRenderPassCmd* renderPassCmd) {
    // This function handles multiple workarounds. Because some cases requires multiple
    // workarounds to happen at the same time, it handles workarounds one by one and calls
    // itself recursively to handle the next workaround if needed.

    // Handles the workaround for r8unorm rg8unorm mipmap rendering being broken on some
    // devices. Render to a temporary texture instead and then copy back to the attachment.
    if (device->IsToggleEnabled(Toggle::MetalRenderR8RG8UnormSmallMipToTempTexture)) {
        std::array<SavedMetalAttachment, kMaxColorAttachments> originalAttachments;
        bool workaroundUsed = false;

        for (uint32_t i = 0; i < kMaxColorAttachments; ++i) {
            if (mtlRenderPass.colorAttachments[i].texture == nullptr) {
                continue;
            }

            if ([mtlRenderPass.colorAttachments[i].texture pixelFormat] != MTLPixelFormatR8Unorm &&
                [mtlRenderPass.colorAttachments[i].texture pixelFormat] != MTLPixelFormatRG8Unorm) {
                continue;
            }

            if (mtlRenderPass.colorAttachments[i].level < 2) {
                continue;
            }

            DAWN_TRY_ASSIGN(originalAttachments[i], PatchAttachmentWithTemporary(
                                                        device, mtlRenderPass.colorAttachments[i]));
            workaroundUsed = true;

            if (mtlRenderPass.colorAttachments[i].loadAction == MTLLoadActionLoad) {
                originalAttachments[i].CopyFromAttachmentToTemporary(commandContext);
            }
        }

        if (workaroundUsed) {
            DAWN_TRY(EncodeMetalRenderPass(device, commandContext, mtlRenderPass, width, height,
                                           std::move(encodeInside), renderPassCmd));

            for (uint32_t i = 0; i < kMaxColorAttachments; ++i) {
                if (originalAttachments[i].texture == nullptr) {
                    continue;
                }

                originalAttachments[i].CopyFromTemporaryToAttachment(commandContext);
            }
            return {};
        }
    }

    // Handle Store + MSAA resolve workaround (Toggle EmulateStoreAndMSAAResolve).
    // Done after the workarounds that modify the non-resolve attachments so that
    // ResolveInAnotherRenderPass uses the temporary attachments if needed instead of the
    // original ones.
    if (device->IsToggleEnabled(Toggle::EmulateStoreAndMSAAResolve)) {
        bool hasStoreAndMSAAResolve = false;

        // Remove any store + MSAA resolve and remember them.
        std::array<id<MTLTexture>, kMaxColorAttachments> resolveTextures = {};
        for (uint32_t i = 0; i < kMaxColorAttachments; ++i) {
            if (mtlRenderPass.colorAttachments[i].storeAction ==
                kMTLStoreActionStoreAndMultisampleResolve) {
                hasStoreAndMSAAResolve = true;
                resolveTextures[i] = mtlRenderPass.colorAttachments[i].resolveTexture;

                mtlRenderPass.colorAttachments[i].storeAction = MTLStoreActionStore;
                mtlRenderPass.colorAttachments[i].resolveTexture = nullptr;
            }
        }

        // If we found a store + MSAA resolve we need to resolve in a different render pass.
        if (hasStoreAndMSAAResolve) {
            DAWN_TRY(EncodeMetalRenderPass(device, commandContext, mtlRenderPass, width, height,
                                           std::move(encodeInside), renderPassCmd));

            ResolveInAnotherRenderPass(commandContext, mtlRenderPass, resolveTextures);
            return {};
        }
    }

    // No (more) workarounds needed! We can finally encode the actual render pass.
    commandContext->EndBlit();
    DAWN_TRY(encodeInside(commandContext->BeginRender(mtlRenderPass), renderPassCmd));
    commandContext->EndRender();
    return {};
}

MaybeError EncodeEmptyMetalRenderPass(Device* device,
                                      CommandRecordingContext* commandContext,
                                      MTLRenderPassDescriptor* mtlRenderPass,
                                      Extent3D size) {
    return EncodeMetalRenderPass(
        device, commandContext, mtlRenderPass, size.width, size.height,
        [&](id<MTLRenderCommandEncoder>, BeginRenderPassCmd*) -> MaybeError { return {}; });
}

DAWN_NOINLINE bool SupportCounterSamplingAtCommandBoundary(id<MTLDevice> device)
    API_AVAILABLE(macos(11.0), ios(14.0)) {
    bool isBlitBoundarySupported =
        [device supportsCounterSampling:MTLCounterSamplingPointAtBlitBoundary];
    bool isDispatchBoundarySupported =
        [device supportsCounterSampling:MTLCounterSamplingPointAtDispatchBoundary];
    bool isDrawBoundarySupported =
        [device supportsCounterSampling:MTLCounterSamplingPointAtDrawBoundary];

    return isBlitBoundarySupported && isDispatchBoundarySupported && isDrawBoundarySupported;
}

DAWN_NOINLINE bool SupportCounterSamplingAtStageBoundary(id<MTLDevice> device)
    API_AVAILABLE(macos(11.0), ios(14.0)) {
    return [device supportsCounterSampling:MTLCounterSamplingPointAtStageBoundary];
}

}  // namespace dawn::native::metal