| /// Copyright 2021 The Dawn & Tint Authors |
| // |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are met: |
| // |
| // 1. Redistributions of source code must retain the above copyright notice, this |
| // list of conditions and the following disclaimer. |
| // |
| // 2. Redistributions in binary form must reproduce the above copyright notice, |
| // this list of conditions and the following disclaimer in the documentation |
| // and/or other materials provided with the distribution. |
| // |
| // 3. Neither the name of the copyright holder nor the names of its |
| // contributors may be used to endorse or promote products derived from |
| // this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| // DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| // FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| // DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| // CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| // OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| #include "src/tint/lang/glsl/writer/ast_printer/ast_printer.h" |
| |
| #include <algorithm> |
| #include <cmath> |
| #include <iomanip> |
| #include <limits> |
| #include <set> |
| #include <utility> |
| #include <vector> |
| |
| #include "src/tint/lang/core/constant/splat.h" |
| #include "src/tint/lang/core/constant/value.h" |
| #include "src/tint/lang/core/fluent_types.h" |
| #include "src/tint/lang/core/type/array.h" |
| #include "src/tint/lang/core/type/atomic.h" |
| #include "src/tint/lang/core/type/depth_multisampled_texture.h" |
| #include "src/tint/lang/core/type/depth_texture.h" |
| #include "src/tint/lang/core/type/multisampled_texture.h" |
| #include "src/tint/lang/core/type/sampled_texture.h" |
| #include "src/tint/lang/core/type/storage_texture.h" |
| #include "src/tint/lang/core/type/texture_dimension.h" |
| #include "src/tint/lang/glsl/writer/ast_raise/combine_samplers.h" |
| #include "src/tint/lang/glsl/writer/ast_raise/pad_structs.h" |
| #include "src/tint/lang/glsl/writer/ast_raise/texture_1d_to_2d.h" |
| #include "src/tint/lang/glsl/writer/ast_raise/texture_builtins_from_uniform.h" |
| #include "src/tint/lang/glsl/writer/common/option_helpers.h" |
| #include "src/tint/lang/glsl/writer/common/options.h" |
| #include "src/tint/lang/glsl/writer/common/printer_support.h" |
| #include "src/tint/lang/wgsl/ast/call_statement.h" |
| #include "src/tint/lang/wgsl/ast/id_attribute.h" |
| #include "src/tint/lang/wgsl/ast/internal_attribute.h" |
| #include "src/tint/lang/wgsl/ast/interpolate_attribute.h" |
| #include "src/tint/lang/wgsl/ast/transform/add_block_attribute.h" |
| #include "src/tint/lang/wgsl/ast/transform/add_empty_entry_point.h" |
| #include "src/tint/lang/wgsl/ast/transform/binding_remapper.h" |
| #include "src/tint/lang/wgsl/ast/transform/builtin_polyfill.h" |
| #include "src/tint/lang/wgsl/ast/transform/canonicalize_entry_point_io.h" |
| #include "src/tint/lang/wgsl/ast/transform/clamp_frag_depth.h" |
| #include "src/tint/lang/wgsl/ast/transform/demote_to_helper.h" |
| #include "src/tint/lang/wgsl/ast/transform/direct_variable_access.h" |
| #include "src/tint/lang/wgsl/ast/transform/disable_uniformity_analysis.h" |
| #include "src/tint/lang/wgsl/ast/transform/expand_compound_assignment.h" |
| #include "src/tint/lang/wgsl/ast/transform/fold_constants.h" |
| #include "src/tint/lang/wgsl/ast/transform/manager.h" |
| #include "src/tint/lang/wgsl/ast/transform/multiplanar_external_texture.h" |
| #include "src/tint/lang/wgsl/ast/transform/offset_first_index.h" |
| #include "src/tint/lang/wgsl/ast/transform/preserve_padding.h" |
| #include "src/tint/lang/wgsl/ast/transform/promote_initializers_to_let.h" |
| #include "src/tint/lang/wgsl/ast/transform/promote_side_effects_to_decl.h" |
| #include "src/tint/lang/wgsl/ast/transform/remove_continue_in_switch.h" |
| #include "src/tint/lang/wgsl/ast/transform/remove_phonies.h" |
| #include "src/tint/lang/wgsl/ast/transform/renamer.h" |
| #include "src/tint/lang/wgsl/ast/transform/robustness.h" |
| #include "src/tint/lang/wgsl/ast/transform/simplify_pointers.h" |
| #include "src/tint/lang/wgsl/ast/transform/single_entry_point.h" |
| #include "src/tint/lang/wgsl/ast/transform/std140.h" |
| #include "src/tint/lang/wgsl/ast/transform/unshadow.h" |
| #include "src/tint/lang/wgsl/ast/transform/zero_init_workgroup_memory.h" |
| #include "src/tint/lang/wgsl/ast/variable_decl_statement.h" |
| #include "src/tint/lang/wgsl/helpers/append_vector.h" |
| #include "src/tint/lang/wgsl/helpers/check_supported_extensions.h" |
| #include "src/tint/lang/wgsl/sem/block_statement.h" |
| #include "src/tint/lang/wgsl/sem/builtin_enum_expression.h" |
| #include "src/tint/lang/wgsl/sem/call.h" |
| #include "src/tint/lang/wgsl/sem/function.h" |
| #include "src/tint/lang/wgsl/sem/member_accessor_expression.h" |
| #include "src/tint/lang/wgsl/sem/module.h" |
| #include "src/tint/lang/wgsl/sem/statement.h" |
| #include "src/tint/lang/wgsl/sem/struct.h" |
| #include "src/tint/lang/wgsl/sem/switch_statement.h" |
| #include "src/tint/lang/wgsl/sem/value_constructor.h" |
| #include "src/tint/lang/wgsl/sem/value_conversion.h" |
| #include "src/tint/lang/wgsl/sem/variable.h" |
| #include "src/tint/utils/containers/map.h" |
| #include "src/tint/utils/ice/ice.h" |
| #include "src/tint/utils/macros/defer.h" |
| #include "src/tint/utils/macros/scoped_assignment.h" |
| #include "src/tint/utils/rtti/switch.h" |
| #include "src/tint/utils/text/string.h" |
| #include "src/tint/utils/text/string_stream.h" |
| |
| using namespace tint::core::number_suffixes; // NOLINT |
| using namespace tint::core::fluent_types; // NOLINT |
| |
| namespace tint::glsl::writer { |
| namespace { |
| |
| const char kTempNamePrefix[] = "tint_tmp"; |
| |
| bool last_is_break(const ast::BlockStatement* stmts) { |
| return tint::IsAnyOf<ast::BreakStatement>(stmts->Last()); |
| } |
| |
| bool IsRelational(tint::core::BinaryOp op) { |
| return op == tint::core::BinaryOp::kEqual || op == tint::core::BinaryOp::kNotEqual || |
| op == tint::core::BinaryOp::kLessThan || op == tint::core::BinaryOp::kGreaterThan || |
| op == tint::core::BinaryOp::kLessThanEqual || |
| op == tint::core::BinaryOp::kGreaterThanEqual; |
| } |
| |
| bool RequiresOESSampleVariables(tint::core::BuiltinValue builtin) { |
| switch (builtin) { |
| case tint::core::BuiltinValue::kSampleIndex: |
| case tint::core::BuiltinValue::kSampleMask: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| } // namespace |
| |
| SanitizedResult::SanitizedResult() = default; |
| SanitizedResult::~SanitizedResult() = default; |
| SanitizedResult::SanitizedResult(SanitizedResult&&) = default; |
| |
| SanitizedResult Sanitize(const Program& in, |
| const Options& options, |
| const std::string& entry_point) { |
| ast::transform::Manager manager; |
| ast::transform::DataMap data; |
| |
| manager.Add<ast::transform::FoldConstants>(); |
| |
| manager.Add<ast::transform::DisableUniformityAnalysis>(); |
| |
| // ExpandCompoundAssignment must come before BuiltinPolyfill |
| manager.Add<ast::transform::ExpandCompoundAssignment>(); |
| |
| if (!entry_point.empty()) { |
| manager.Add<ast::transform::SingleEntryPoint>(); |
| data.Add<ast::transform::SingleEntryPoint::Config>(entry_point); |
| } |
| |
| manager.Add<ast::transform::PreservePadding>(); // Must come before DirectVariableAccess |
| |
| manager.Add<ast::transform::Unshadow>(); // Must come before DirectVariableAccess |
| |
| manager.Add<ast::transform::PromoteSideEffectsToDecl>(); |
| |
| if (!options.disable_robustness) { |
| // Robustness must come after PromoteSideEffectsToDecl |
| // Robustness must come before BuiltinPolyfill and CanonicalizeEntryPointIO |
| manager.Add<ast::transform::Robustness>(); |
| } |
| |
| if (!options.disable_workgroup_init) { |
| // ZeroInitWorkgroupMemory must come before CanonicalizeEntryPointIO as |
| // ZeroInitWorkgroupMemory may inject new builtin parameters. |
| manager.Add<ast::transform::ZeroInitWorkgroupMemory>(); |
| } |
| |
| manager.Add<ast::transform::RemovePhonies>(); |
| |
| // TextureBuiltinsFromUniform must come before CombineSamplers to preserve texture binding point |
| // info, instead of combined sampler binding point. As a result, TextureBuiltinsFromUniform also |
| // comes before BindingRemapper so the binding point info it reflects is before remapping. |
| manager.Add<TextureBuiltinsFromUniform>(); |
| data.Add<TextureBuiltinsFromUniform::Config>( |
| options.bindings.texture_builtins_from_uniform.ubo_binding, |
| options.bindings.texture_builtins_from_uniform.ubo_bindingpoint_ordering); |
| |
| tint::transform::multiplanar::BindingsMap multiplanar_map{}; |
| RemapperData remapper_data{}; |
| PopulateBindingInfo(options, remapper_data, multiplanar_map); |
| |
| data.Add<ast::transform::BindingRemapper::Remappings>( |
| remapper_data, std::unordered_map<BindingPoint, core::Access>{}, |
| /* allow_collisions */ true); |
| manager.Add<ast::transform::BindingRemapper>(); |
| |
| // Note: it is more efficient for MultiplanarExternalTexture to come after Robustness |
| // Must come before builtin polyfills |
| data.Add<ast::transform::MultiplanarExternalTexture::NewBindingPoints>( |
| multiplanar_map, /* allow collisions */ true); |
| manager.Add<ast::transform::MultiplanarExternalTexture>(); |
| |
| // Must be after multiplanar and must be before OffsetFirstindex |
| manager.Add<ast::transform::AddBlockAttribute>(); |
| |
| // This must come before ClampFragDepth as the AddBlockAttribute will change around the struct |
| // that gets created for the push constants and we end up with the `inner` structure sitting at |
| // the same offset we want to place the first_instance value. |
| manager.Add<ast::transform::OffsetFirstIndex>(); |
| data.Add<ast::transform::OffsetFirstIndex::Config>(options.first_vertex_offset, |
| options.first_instance_offset); |
| |
| // ClampFragDepth must come before CanonicalizeEntryPointIO, or the assignments to FragDepth are |
| // lost |
| manager.Add<ast::transform::ClampFragDepth>(); |
| std::optional<ast::transform::ClampFragDepth::RangeOffsets> range_offsets; |
| if (options.depth_range_offsets.has_value()) { |
| range_offsets = {options.depth_range_offsets->min, options.depth_range_offsets->max}; |
| } |
| data.Add<ast::transform::ClampFragDepth::Config>(range_offsets); |
| |
| // CanonicalizeEntryPointIO must come after Robustness |
| manager.Add<ast::transform::CanonicalizeEntryPointIO>(); |
| data.Add<ast::transform::CanonicalizeEntryPointIO::Config>( |
| ast::transform::CanonicalizeEntryPointIO::ShaderStyle::kGlsl); |
| |
| // DemoteToHelper must come after PromoteSideEffectsToDecl and ExpandCompoundAssignment. |
| manager.Add<ast::transform::DemoteToHelper>(); |
| |
| { // Builtin polyfills |
| ast::transform::BuiltinPolyfill::Builtins polyfills; |
| polyfills.acosh = ast::transform::BuiltinPolyfill::Level::kRangeCheck; |
| polyfills.atanh = ast::transform::BuiltinPolyfill::Level::kRangeCheck; |
| polyfills.bgra8unorm = true; |
| polyfills.bitshift_modulo = true; |
| polyfills.conv_f32_to_iu32 = true; |
| polyfills.count_leading_zeros = true; |
| polyfills.count_trailing_zeros = true; |
| polyfills.extract_bits = ast::transform::BuiltinPolyfill::Level::kClampParameters; |
| polyfills.first_leading_bit = true; |
| polyfills.first_trailing_bit = true; |
| polyfills.insert_bits = ast::transform::BuiltinPolyfill::Level::kClampParameters; |
| polyfills.int_div_mod = !options.disable_polyfill_integer_div_mod; |
| polyfills.saturate = true; |
| polyfills.texture_sample_base_clamp_to_edge_2d_f32 = true; |
| polyfills.workgroup_uniform_load = true; |
| polyfills.dot_4x8_packed = true; |
| polyfills.pack_unpack_4x8 = true; |
| polyfills.pack_4xu8_clamp = true; |
| data.Add<ast::transform::BuiltinPolyfill::Config>(polyfills); |
| manager.Add<ast::transform::BuiltinPolyfill>(); // Must come before DirectVariableAccess |
| } |
| |
| manager.Add<ast::transform::DirectVariableAccess>(); |
| |
| // Must come after builtin polyfills (specifically texture_sample_base_clamp_to_edge_2d_f32) |
| data.Add<Bindings>(options.bindings); |
| manager.Add<CombineSamplers>(); |
| |
| // PadStructs must come after CanonicalizeEntryPointIO and CombineSamplers |
| manager.Add<PadStructs>(); |
| |
| // Promote initializers must come after binding polyfill |
| manager.Add<ast::transform::PromoteInitializersToLet>(); |
| manager.Add<ast::transform::RemoveContinueInSwitch>(); |
| manager.Add<ast::transform::AddEmptyEntryPoint>(); |
| |
| // Std140 must come after PromoteSideEffectsToDecl and before SimplifyPointers. |
| manager.Add<ast::transform::Std140>(); |
| |
| manager.Add<Texture1DTo2D>(); |
| |
| manager.Add<ast::transform::SimplifyPointers>(); |
| |
| SanitizedResult result; |
| ast::transform::DataMap outputs; |
| result.program = manager.Run(in, data, outputs); |
| return result; |
| } |
| |
| ASTPrinter::ASTPrinter(const Program& program, const Version& version) |
| : builder_(ProgramBuilder::Wrap(program)), version_(version) {} |
| |
| ASTPrinter::~ASTPrinter() = default; |
| |
| bool ASTPrinter::Generate() { |
| if (!tint::wgsl::CheckSupportedExtensions( |
| "GLSL", builder_.AST(), diagnostics_, |
| Vector{ |
| wgsl::Extension::kChromiumDisableUniformityAnalysis, |
| wgsl::Extension::kChromiumExperimentalPushConstant, |
| wgsl::Extension::kChromiumInternalGraphite, |
| wgsl::Extension::kF16, |
| wgsl::Extension::kDualSourceBlending, |
| })) { |
| return false; |
| } |
| |
| { |
| auto out = Line(); |
| out << "#version " << version_.major_version << version_.minor_version << "0"; |
| if (version_.IsES()) { |
| out << " es"; |
| } |
| } |
| |
| auto helpers_insertion_point = current_buffer_->lines.size(); |
| |
| Line(); |
| |
| auto* mod = builder_.Sem().Module(); |
| for (auto* decl : mod->DependencyOrderedDeclarations()) { |
| if (decl->IsAnyOf<ast::Alias, ast::ConstAssert, ast::DiagnosticDirective>()) { |
| continue; // These are not emitted. |
| } |
| |
| Switch( |
| decl, // |
| [&](const ast::Variable* global) { return EmitGlobalVariable(global); }, |
| [&](const ast::Struct* str) { |
| auto* sem = builder_.Sem().Get(str); |
| bool has_rt_arr = false; |
| if (auto* arr = sem->Members().Back()->Type()->As<core::type::Array>()) { |
| has_rt_arr = arr->Count()->Is<core::type::RuntimeArrayCount>(); |
| } |
| bool is_block = |
| ast::HasAttribute<ast::transform::AddBlockAttribute::BlockAttribute>( |
| str->attributes) && |
| !sem->UsedAs(core::AddressSpace::kPushConstant); |
| if (!has_rt_arr && !is_block) { |
| EmitStructType(current_buffer_, sem); |
| } |
| }, |
| [&](const ast::Function* func) { |
| if (func->IsEntryPoint()) { |
| EmitEntryPointFunction(func); |
| } else { |
| EmitFunction(func); |
| } |
| }, |
| [&](const ast::Enable* enable) { |
| // Record the required extension for generating extension directive later |
| RecordExtension(enable); |
| }, // |
| [&](const ast::Requires*) { |
| // Do nothing for requiring language features in GLSL. |
| }, // |
| TINT_ICE_ON_NO_MATCH); |
| } |
| |
| TextBuffer extensions; |
| |
| if (version_.IsES() && requires_oes_sample_variables_) { |
| extensions.Append("#extension GL_OES_sample_variables : require"); |
| } |
| |
| if (requires_f16_extension_) { |
| extensions.Append("#extension GL_AMD_gpu_shader_half_float : require"); |
| } |
| |
| if (requires_dual_source_blending_extension_) { |
| extensions.Append("#extension GL_EXT_blend_func_extended : require"); |
| } |
| |
| auto indent = current_buffer_->current_indent; |
| |
| if (!extensions.lines.empty()) { |
| current_buffer_->Insert(extensions, helpers_insertion_point, indent); |
| helpers_insertion_point += extensions.lines.size(); |
| } |
| |
| if (version_.IsES() && requires_default_precision_qualifier_) { |
| current_buffer_->Insert("precision highp float;", helpers_insertion_point++, indent); |
| current_buffer_->Insert("precision highp int;", helpers_insertion_point++, indent); |
| } |
| |
| if (!helpers_.lines.empty()) { |
| current_buffer_->Insert("", helpers_insertion_point++, indent); |
| current_buffer_->Insert(helpers_, helpers_insertion_point, indent); |
| helpers_insertion_point += helpers_.lines.size(); |
| } |
| |
| return !diagnostics_.ContainsErrors(); |
| } |
| |
| void ASTPrinter::RecordExtension(const ast::Enable* enable) { |
| // Deal with extension node here, recording it within the generator for later emition. |
| |
| if (enable->HasExtension(wgsl::Extension::kF16)) { |
| requires_f16_extension_ = true; |
| } |
| |
| if (enable->HasExtension(wgsl::Extension::kDualSourceBlending)) { |
| requires_dual_source_blending_extension_ = true; |
| } |
| } |
| |
| void ASTPrinter::EmitIndexAccessor(StringStream& out, const ast::IndexAccessorExpression* expr) { |
| EmitExpression(out, expr->object); |
| out << "["; |
| EmitExpression(out, expr->index); |
| out << "]"; |
| } |
| |
| void ASTPrinter::EmitBitcastCall(StringStream& out, const ast::CallExpression* call) { |
| auto* arg = call->args[0]; |
| auto* src_type = TypeOf(arg)->UnwrapRef(); |
| auto* dst_type = TypeOf(call); |
| |
| if (!dst_type->IsIntegerScalarOrVector() && !dst_type->IsFloatScalarOrVector()) { |
| diagnostics_.AddError(Source{}) |
| << "Unable to do bitcast to type " << dst_type->FriendlyName(); |
| return; |
| } |
| |
| // Handle identity bitcast. |
| if (src_type == dst_type) { |
| return EmitExpression(out, arg); |
| } |
| |
| // Use packFloat2x16 and unpackFloat2x16 for f16 types. |
| if (src_type->DeepestElement()->Is<core::type::F16>()) { |
| // Source type must be vec2<f16> or vec4<f16>, since type f16 and vec3<f16> can only have |
| // identity bitcast. |
| auto* src_vec = src_type->As<core::type::Vector>(); |
| TINT_ASSERT(src_vec); |
| TINT_ASSERT(((src_vec->Width() == 2u) || (src_vec->Width() == 4u))); |
| std::string fn = |
| GetOrAdd(bitcast_funcs_, BinaryOperandType{{src_type, dst_type}}, [&]() -> std::string { |
| TextBuffer b; |
| TINT_DEFER(helpers_.Append(b)); |
| |
| auto fn_name = UniqueIdentifier("tint_bitcast_from_f16"); |
| { |
| auto decl = Line(&b); |
| EmitTypeAndName(decl, dst_type, core::AddressSpace::kUndefined, |
| core::Access::kUndefined, fn_name); |
| { |
| ScopedParen sp(decl); |
| EmitTypeAndName(decl, src_type, core::AddressSpace::kUndefined, |
| core::Access::kUndefined, "src"); |
| } |
| decl << " {"; |
| } |
| { |
| ScopedIndent si(&b); |
| switch (src_vec->Width()) { |
| case 2: { |
| Line(&b) << "uint r = packFloat2x16(src);"; |
| break; |
| } |
| case 4: { |
| Line(&b) |
| << "uvec2 r = uvec2(packFloat2x16(src.xy), packFloat2x16(src.zw));"; |
| break; |
| } |
| } |
| auto s = Line(&b); |
| s << "return "; |
| if (dst_type->IsFloatScalarOrVector()) { |
| s << "uintBitsToFloat"; |
| } else { |
| EmitType(s, dst_type, core::AddressSpace::kUndefined, |
| core::Access::kReadWrite, ""); |
| } |
| s << "(r);"; |
| } |
| Line(&b) << "}"; |
| return fn_name; |
| }); |
| // Call the helper |
| out << fn; |
| { |
| ScopedParen sp(out); |
| EmitExpression(out, arg); |
| } |
| } else if (dst_type->DeepestElement()->Is<core::type::F16>()) { |
| // Destination type must be vec2<f16> or vec4<f16>. |
| auto* dst_vec = dst_type->As<core::type::Vector>(); |
| TINT_ASSERT(dst_vec); |
| TINT_ASSERT(((dst_vec->Width() == 2u) || (dst_vec->Width() == 4u))); |
| std::string fn = |
| GetOrAdd(bitcast_funcs_, BinaryOperandType{{src_type, dst_type}}, [&]() -> std::string { |
| TextBuffer b; |
| TINT_DEFER(helpers_.Append(b)); |
| |
| auto fn_name = UniqueIdentifier("tint_bitcast_to_f16"); |
| { |
| auto decl = Line(&b); |
| EmitTypeAndName(decl, dst_type, core::AddressSpace::kUndefined, |
| core::Access::kUndefined, fn_name); |
| { |
| ScopedParen sp(decl); |
| EmitTypeAndName(decl, src_type, core::AddressSpace::kUndefined, |
| core::Access::kUndefined, "src"); |
| } |
| decl << " {"; |
| } |
| { |
| ScopedIndent si(&b); |
| if (auto src_vec = src_type->As<core::type::Vector>()) { |
| // Source vector type must be vec2<f32/i32/u32>, destination type vec4<f16>. |
| TINT_ASSERT( |
| (src_vec->DeepestElement() |
| ->IsAnyOf<core::type::I32, core::type::U32, core::type::F32>())); |
| TINT_ASSERT((src_vec->Width() == 2u)); |
| { |
| auto s = Line(&b); |
| s << "uvec2 r = "; |
| if (src_type->IsFloatScalarOrVector()) { |
| s << "floatBitsToUint"; |
| } else { |
| s << "uvec2"; |
| } |
| s << "(src);"; |
| } |
| Line(&b) << "f16vec2 v_xy = unpackFloat2x16(r.x);"; |
| Line(&b) << "f16vec2 v_zw = unpackFloat2x16(r.y);"; |
| Line(&b) << "return f16vec4(v_xy.x, v_xy.y, v_zw.x, v_zw.y);"; |
| } else { |
| // Source scalar type must be f32/i32/u32, destination type vec2<f16>. |
| TINT_ASSERT( |
| (src_type |
| ->IsAnyOf<core::type::I32, core::type::U32, core::type::F32>())); |
| { |
| auto s = Line(&b); |
| s << "uint r = "; |
| if (src_type->IsFloatScalarOrVector()) { |
| s << "floatBitsToUint"; |
| } else { |
| s << "uint"; |
| } |
| s << "(src);"; |
| } |
| Line(&b) << "return unpackFloat2x16(r);"; |
| } |
| } |
| Line(&b) << "}"; |
| return fn_name; |
| }); |
| // Call the helper |
| out << fn; |
| { |
| ScopedParen sp(out); |
| EmitExpression(out, arg); |
| } |
| } else { |
| if (src_type->IsFloatScalarOrVector() && dst_type->IsSignedIntegerScalarOrVector()) { |
| out << "floatBitsToInt"; |
| } else if (src_type->IsFloatScalarOrVector() && |
| dst_type->IsUnsignedIntegerScalarOrVector()) { |
| out << "floatBitsToUint"; |
| } else if (src_type->IsSignedIntegerScalarOrVector() && dst_type->IsFloatScalarOrVector()) { |
| out << "intBitsToFloat"; |
| } else if (src_type->IsUnsignedIntegerScalarOrVector() && |
| dst_type->IsFloatScalarOrVector()) { |
| out << "uintBitsToFloat"; |
| } else { |
| EmitType(out, dst_type, core::AddressSpace::kUndefined, core::Access::kReadWrite, ""); |
| } |
| ScopedParen sp(out); |
| EmitExpression(out, arg); |
| } |
| } |
| |
| void ASTPrinter::EmitAssign(const ast::AssignmentStatement* stmt) { |
| auto out = Line(); |
| EmitExpression(out, stmt->lhs); |
| out << " = "; |
| EmitExpression(out, stmt->rhs); |
| out << ";"; |
| } |
| |
| void ASTPrinter::EmitVectorRelational(StringStream& out, const ast::BinaryExpression* expr) { |
| switch (expr->op) { |
| case core::BinaryOp::kEqual: |
| out << "equal"; |
| break; |
| case core::BinaryOp::kNotEqual: |
| out << "notEqual"; |
| break; |
| case core::BinaryOp::kLessThan: |
| out << "lessThan"; |
| break; |
| case core::BinaryOp::kGreaterThan: |
| out << "greaterThan"; |
| break; |
| case core::BinaryOp::kLessThanEqual: |
| out << "lessThanEqual"; |
| break; |
| case core::BinaryOp::kGreaterThanEqual: |
| out << "greaterThanEqual"; |
| break; |
| default: |
| break; |
| } |
| ScopedParen sp(out); |
| EmitExpression(out, expr->lhs); |
| out << ", "; |
| EmitExpression(out, expr->rhs); |
| } |
| |
| void ASTPrinter::EmitBitwiseBoolOp(StringStream& out, const ast::BinaryExpression* expr) { |
| auto* bool_type = TypeOf(expr->lhs)->UnwrapRef(); |
| auto* uint_type = BoolTypeToUint(bool_type); |
| |
| // Cast result to bool scalar or vector type. |
| EmitType(out, bool_type, core::AddressSpace::kUndefined, core::Access::kReadWrite, ""); |
| ScopedParen outerCastParen(out); |
| // Cast LHS to uint scalar or vector type. |
| EmitType(out, uint_type, core::AddressSpace::kUndefined, core::Access::kReadWrite, ""); |
| { |
| ScopedParen innerCastParen(out); |
| // Emit LHS. |
| EmitExpression(out, expr->lhs); |
| } |
| // Emit operator. |
| if (expr->op == core::BinaryOp::kAnd) { |
| out << " & "; |
| } else if (DAWN_LIKELY(expr->op == core::BinaryOp::kOr)) { |
| out << " | "; |
| } else { |
| TINT_ICE() << "unexpected binary op: " << expr->op; |
| } |
| |
| // Cast RHS to uint scalar or vector type. |
| EmitType(out, uint_type, core::AddressSpace::kUndefined, core::Access::kReadWrite, ""); |
| { |
| ScopedParen innerCastParen(out); |
| // Emit RHS. |
| EmitExpression(out, expr->rhs); |
| } |
| } |
| |
| void ASTPrinter::EmitFloatModulo(StringStream& out, const ast::BinaryExpression* expr) { |
| std::string fn; |
| auto* ret_ty = TypeOf(expr)->UnwrapRef(); |
| auto* lhs_ty = TypeOf(expr->lhs)->UnwrapRef(); |
| auto* rhs_ty = TypeOf(expr->rhs)->UnwrapRef(); |
| fn = tint::GetOrAdd(float_modulo_funcs_, BinaryOperandType{{lhs_ty, rhs_ty}}, |
| [&]() -> std::string { |
| TextBuffer b; |
| TINT_DEFER(helpers_.Append(b)); |
| |
| auto fn_name = UniqueIdentifier("tint_float_modulo"); |
| std::vector<std::string> parameter_names; |
| { |
| auto decl = Line(&b); |
| EmitTypeAndName(decl, ret_ty, core::AddressSpace::kUndefined, |
| core::Access::kUndefined, fn_name); |
| { |
| ScopedParen sp(decl); |
| const auto* ty = TypeOf(expr->lhs)->UnwrapRef(); |
| EmitTypeAndName(decl, ty, core::AddressSpace::kUndefined, |
| core::Access::kUndefined, "lhs"); |
| decl << ", "; |
| ty = TypeOf(expr->rhs)->UnwrapRef(); |
| EmitTypeAndName(decl, ty, core::AddressSpace::kUndefined, |
| core::Access::kUndefined, "rhs"); |
| } |
| decl << " {"; |
| } |
| { |
| ScopedIndent si(&b); |
| Line(&b) << "return (lhs - rhs * trunc(lhs / rhs));"; |
| } |
| Line(&b) << "}"; |
| Line(&b); |
| return fn_name; |
| }); |
| |
| // Call the helper |
| out << fn; |
| { |
| ScopedParen sp(out); |
| EmitExpression(out, expr->lhs); |
| out << ", "; |
| EmitExpression(out, expr->rhs); |
| } |
| } |
| |
| void ASTPrinter::EmitBinary(StringStream& out, const ast::BinaryExpression* expr) { |
| if (IsRelational(expr->op) && !TypeOf(expr->lhs)->UnwrapRef()->Is<core::type::Scalar>()) { |
| EmitVectorRelational(out, expr); |
| return; |
| } |
| |
| if (expr->op == core::BinaryOp::kLogicalAnd || expr->op == core::BinaryOp::kLogicalOr) { |
| auto name = UniqueIdentifier(kTempNamePrefix); |
| |
| { |
| auto pre = Line(); |
| pre << "bool " << name << " = "; |
| EmitExpression(pre, expr->lhs); |
| pre << ";"; |
| } |
| |
| if (expr->op == core::BinaryOp::kLogicalOr) { |
| Line() << "if (!" << name << ") {"; |
| } else { |
| Line() << "if (" << name << ") {"; |
| } |
| |
| { |
| ScopedIndent si(this); |
| auto pre = Line(); |
| pre << name << " = "; |
| EmitExpression(pre, expr->rhs); |
| pre << ";"; |
| } |
| |
| Line() << "}"; |
| |
| out << "(" << name << ")"; |
| return; |
| } |
| |
| if ((expr->op == core::BinaryOp::kAnd || expr->op == core::BinaryOp::kOr) && |
| TypeOf(expr->lhs)->UnwrapRef()->IsBoolScalarOrVector()) { |
| EmitBitwiseBoolOp(out, expr); |
| return; |
| } |
| |
| if (expr->op == core::BinaryOp::kModulo && |
| (TypeOf(expr->lhs)->UnwrapRef()->IsFloatScalarOrVector() || |
| TypeOf(expr->rhs)->UnwrapRef()->IsFloatScalarOrVector())) { |
| EmitFloatModulo(out, expr); |
| return; |
| } |
| |
| ScopedParen sp(out); |
| EmitExpression(out, expr->lhs); |
| out << " "; |
| |
| switch (expr->op) { |
| case core::BinaryOp::kAnd: |
| out << "&"; |
| break; |
| case core::BinaryOp::kOr: |
| out << "|"; |
| break; |
| case core::BinaryOp::kXor: |
| out << "^"; |
| break; |
| case core::BinaryOp::kLogicalAnd: |
| case core::BinaryOp::kLogicalOr: { |
| // These are both handled above. |
| TINT_UNREACHABLE(); |
| } |
| case core::BinaryOp::kEqual: |
| out << "=="; |
| break; |
| case core::BinaryOp::kNotEqual: |
| out << "!="; |
| break; |
| case core::BinaryOp::kLessThan: |
| out << "<"; |
| break; |
| case core::BinaryOp::kGreaterThan: |
| out << ">"; |
| break; |
| case core::BinaryOp::kLessThanEqual: |
| out << "<="; |
| break; |
| case core::BinaryOp::kGreaterThanEqual: |
| out << ">="; |
| break; |
| case core::BinaryOp::kShiftLeft: |
| out << "<<"; |
| break; |
| case core::BinaryOp::kShiftRight: |
| out << R"(>>)"; |
| break; |
| |
| case core::BinaryOp::kAdd: |
| out << "+"; |
| break; |
| case core::BinaryOp::kSubtract: |
| out << "-"; |
| break; |
| case core::BinaryOp::kMultiply: |
| out << "*"; |
| break; |
| case core::BinaryOp::kDivide: |
| out << "/"; |
| break; |
| case core::BinaryOp::kModulo: |
| out << "%"; |
| break; |
| } |
| out << " "; |
| EmitExpression(out, expr->rhs); |
| } |
| |
| void ASTPrinter::EmitStatements(VectorRef<const ast::Statement*> stmts) { |
| for (auto* s : stmts) { |
| EmitStatement(s); |
| } |
| } |
| |
| void ASTPrinter::EmitStatementsWithIndent(VectorRef<const ast::Statement*> stmts) { |
| ScopedIndent si(this); |
| EmitStatements(stmts); |
| } |
| |
| void ASTPrinter::EmitBlock(const ast::BlockStatement* stmt) { |
| Line() << "{"; |
| EmitStatementsWithIndent(stmt->statements); |
| Line() << "}"; |
| } |
| |
| void ASTPrinter::EmitBreak(const ast::BreakStatement*) { |
| Line() << "break;"; |
| } |
| |
| void ASTPrinter::EmitBreakIf(const ast::BreakIfStatement* b) { |
| auto out = Line(); |
| out << "if ("; |
| EmitExpression(out, b->condition); |
| out << ") { break; }"; |
| } |
| |
| void ASTPrinter::EmitCall(StringStream& out, const ast::CallExpression* expr) { |
| auto* call = builder_.Sem().Get<sem::Call>(expr); |
| Switch( |
| call->Target(), // |
| [&](const sem::Function* fn) { EmitFunctionCall(out, call, fn); }, |
| [&](const sem::BuiltinFn* builtin) { EmitBuiltinCall(out, call, builtin); }, |
| [&](const sem::ValueConversion* conv) { EmitValueConversion(out, call, conv); }, |
| [&](const sem::ValueConstructor* ctor) { EmitValueConstructor(out, call, ctor); }, |
| TINT_ICE_ON_NO_MATCH); |
| } |
| |
| void ASTPrinter::EmitFunctionCall(StringStream& out, |
| const sem::Call* call, |
| const sem::Function* fn) { |
| const auto& args = call->Arguments(); |
| auto* ident = fn->Declaration()->name; |
| |
| out << ident->symbol.Name(); |
| ScopedParen sp(out); |
| |
| bool first = true; |
| for (auto* arg : args) { |
| if (!first) { |
| out << ", "; |
| } |
| first = false; |
| |
| EmitExpression(out, arg->Declaration()); |
| } |
| } |
| |
| void ASTPrinter::EmitBuiltinCall(StringStream& out, |
| const sem::Call* call, |
| const sem::BuiltinFn* builtin) { |
| auto* expr = call->Declaration(); |
| if (builtin->IsTexture()) { |
| EmitTextureCall(out, call, builtin); |
| } else if (builtin->Fn() == wgsl::BuiltinFn::kCountOneBits) { |
| EmitCountOneBitsCall(out, expr); |
| } else if (builtin->Fn() == wgsl::BuiltinFn::kSelect) { |
| EmitSelectCall(out, expr, builtin); |
| } else if (builtin->Fn() == wgsl::BuiltinFn::kBitcast) { |
| EmitBitcastCall(out, expr); |
| } else if (builtin->Fn() == wgsl::BuiltinFn::kDot) { |
| EmitDotCall(out, expr, builtin); |
| } else if (builtin->Fn() == wgsl::BuiltinFn::kModf) { |
| EmitModfCall(out, expr, builtin); |
| } else if (builtin->Fn() == wgsl::BuiltinFn::kFrexp) { |
| EmitFrexpCall(out, expr, builtin); |
| } else if (builtin->Fn() == wgsl::BuiltinFn::kDegrees) { |
| EmitDegreesCall(out, expr, builtin); |
| } else if (builtin->Fn() == wgsl::BuiltinFn::kRadians) { |
| EmitRadiansCall(out, expr, builtin); |
| } else if (builtin->Fn() == wgsl::BuiltinFn::kQuantizeToF16) { |
| EmitQuantizeToF16Call(out, expr, builtin); |
| } else if (builtin->Fn() == wgsl::BuiltinFn::kArrayLength) { |
| EmitArrayLength(out, expr); |
| } else if (builtin->Fn() == wgsl::BuiltinFn::kExtractBits) { |
| EmitExtractBits(out, expr); |
| } else if (builtin->Fn() == wgsl::BuiltinFn::kInsertBits) { |
| EmitInsertBits(out, expr); |
| } else if (builtin->Fn() == wgsl::BuiltinFn::kFma && version_.IsES()) { |
| EmitEmulatedFMA(out, expr); |
| } else if (builtin->Fn() == wgsl::BuiltinFn::kAbs && |
| TypeOf(expr->args[0])->UnwrapRef()->IsUnsignedIntegerScalarOrVector()) { |
| // GLSL does not support abs() on unsigned arguments. However, it's a no-op. |
| EmitExpression(out, expr->args[0]); |
| } else if ((builtin->Fn() == wgsl::BuiltinFn::kAny || builtin->Fn() == wgsl::BuiltinFn::kAll) && |
| TypeOf(expr->args[0])->UnwrapRef()->Is<core::type::Scalar>()) { |
| // GLSL does not support any() or all() on scalar arguments. It's a no-op. |
| EmitExpression(out, expr->args[0]); |
| } else if (builtin->IsBarrier()) { |
| EmitBarrierCall(out, builtin); |
| } else if (builtin->IsAtomic()) { |
| EmitWorkgroupAtomicCall(out, expr, builtin); |
| } else { |
| auto name = generate_builtin_name(builtin); |
| if (name.empty()) { |
| return; |
| } |
| |
| out << name; |
| ScopedParen sp(out); |
| |
| bool first = true; |
| for (auto* arg : call->Arguments()) { |
| if (!first) { |
| out << ", "; |
| } |
| first = false; |
| |
| EmitExpression(out, arg->Declaration()); |
| } |
| } |
| } |
| |
| void ASTPrinter::EmitValueConversion(StringStream& out, |
| const sem::Call* call, |
| const sem::ValueConversion* conv) { |
| EmitType(out, conv->Target(), core::AddressSpace::kUndefined, core::Access::kReadWrite, ""); |
| ScopedParen sp(out); |
| EmitExpression(out, call->Arguments()[0]->Declaration()); |
| } |
| |
| void ASTPrinter::EmitValueConstructor(StringStream& out, |
| const sem::Call* call, |
| const sem::ValueConstructor* ctor) { |
| auto* type = ctor->ReturnType(); |
| |
| // If the value constructor is empty then we need to construct with the zero value for all |
| // components. |
| if (call->Arguments().IsEmpty()) { |
| EmitZeroValue(out, type); |
| return; |
| } |
| |
| EmitType(out, type, core::AddressSpace::kUndefined, core::Access::kReadWrite, ""); |
| ScopedParen sp(out); |
| |
| bool first = true; |
| for (auto* arg : call->Arguments()) { |
| if (!first) { |
| out << ", "; |
| } |
| first = false; |
| |
| EmitExpression(out, arg->Declaration()); |
| } |
| } |
| |
| void ASTPrinter::EmitWorkgroupAtomicCall(StringStream& out, |
| const ast::CallExpression* expr, |
| const sem::BuiltinFn* builtin) { |
| auto call = [&](const char* name) { |
| out << name; |
| { |
| ScopedParen sp(out); |
| for (size_t i = 0; i < expr->args.Length(); i++) { |
| auto* arg = expr->args[i]; |
| if (i > 0) { |
| out << ", "; |
| } |
| EmitExpression(out, arg); |
| } |
| } |
| return; |
| }; |
| |
| switch (builtin->Fn()) { |
| case wgsl::BuiltinFn::kAtomicLoad: { |
| // GLSL does not have an atomicLoad, so we emulate it with |
| // atomicOr using 0 as the OR value |
| out << "atomicOr"; |
| { |
| ScopedParen sp(out); |
| EmitExpression(out, expr->args[0]); |
| out << ", 0"; |
| if (builtin->ReturnType()->Is<core::type::U32>()) { |
| out << "u"; |
| } |
| } |
| return; |
| } |
| case wgsl::BuiltinFn::kAtomicCompareExchangeWeak: { |
| EmitStructType(&helpers_, builtin->ReturnType()->As<core::type::Struct>()); |
| |
| auto* dest = expr->args[0]; |
| auto* compare_value = expr->args[1]; |
| auto* value = expr->args[2]; |
| |
| std::string result = UniqueIdentifier("atomic_compare_result"); |
| |
| { |
| auto pre = Line(); |
| EmitTypeAndName(pre, builtin->ReturnType(), core::AddressSpace::kUndefined, |
| core::Access::kUndefined, result); |
| pre << ";"; |
| } |
| { |
| auto pre = Line(); |
| pre << result << ".old_value = atomicCompSwap"; |
| { |
| ScopedParen sp(pre); |
| EmitExpression(pre, dest); |
| pre << ", "; |
| EmitExpression(pre, compare_value); |
| pre << ", "; |
| EmitExpression(pre, value); |
| } |
| pre << ";"; |
| } |
| { |
| auto pre = Line(); |
| pre << result << ".exchanged = " << result << ".old_value == "; |
| EmitExpression(pre, compare_value); |
| pre << ";"; |
| } |
| |
| out << result; |
| return; |
| } |
| |
| case wgsl::BuiltinFn::kAtomicAdd: |
| call("atomicAdd"); |
| return; |
| |
| case wgsl::BuiltinFn::kAtomicSub: |
| out << "atomicAdd"; |
| { |
| ScopedParen sp(out); |
| TINT_ASSERT(expr->args.Length() == 2); |
| EmitExpression(out, expr->args[0]); |
| out << ", -"; |
| { |
| ScopedParen argSP(out); |
| EmitExpression(out, expr->args[1]); |
| } |
| } |
| return; |
| |
| case wgsl::BuiltinFn::kAtomicMax: |
| call("atomicMax"); |
| return; |
| |
| case wgsl::BuiltinFn::kAtomicMin: |
| call("atomicMin"); |
| return; |
| |
| case wgsl::BuiltinFn::kAtomicAnd: |
| call("atomicAnd"); |
| return; |
| |
| case wgsl::BuiltinFn::kAtomicOr: |
| call("atomicOr"); |
| return; |
| |
| case wgsl::BuiltinFn::kAtomicXor: |
| call("atomicXor"); |
| return; |
| |
| case wgsl::BuiltinFn::kAtomicExchange: |
| case wgsl::BuiltinFn::kAtomicStore: |
| // GLSL does not have an atomicStore, so we emulate it with |
| // atomicExchange. |
| call("atomicExchange"); |
| return; |
| |
| default: |
| break; |
| } |
| |
| TINT_UNREACHABLE() << "unsupported atomic builtin: " << builtin->Fn(); |
| } |
| |
| void ASTPrinter::EmitArrayLength(StringStream& out, const ast::CallExpression* expr) { |
| out << "uint("; |
| EmitExpression(out, expr->args[0]); |
| out << ".length())"; |
| } |
| |
| void ASTPrinter::EmitExtractBits(StringStream& out, const ast::CallExpression* expr) { |
| out << "bitfieldExtract("; |
| EmitExpression(out, expr->args[0]); |
| out << ", int("; |
| EmitExpression(out, expr->args[1]); |
| out << "), int("; |
| EmitExpression(out, expr->args[2]); |
| out << "))"; |
| } |
| |
| void ASTPrinter::EmitInsertBits(StringStream& out, const ast::CallExpression* expr) { |
| out << "bitfieldInsert("; |
| EmitExpression(out, expr->args[0]); |
| out << ", "; |
| EmitExpression(out, expr->args[1]); |
| out << ", int("; |
| EmitExpression(out, expr->args[2]); |
| out << "), int("; |
| EmitExpression(out, expr->args[3]); |
| out << "))"; |
| } |
| |
| void ASTPrinter::EmitEmulatedFMA(StringStream& out, const ast::CallExpression* expr) { |
| out << "(("; |
| EmitExpression(out, expr->args[0]); |
| out << ") * ("; |
| EmitExpression(out, expr->args[1]); |
| out << ") + ("; |
| EmitExpression(out, expr->args[2]); |
| out << "))"; |
| } |
| |
| void ASTPrinter::EmitCountOneBitsCall(StringStream& out, const ast::CallExpression* expr) { |
| // GLSL's bitCount returns an integer type, so cast it to the appropriate |
| // unsigned type. |
| EmitType(out, TypeOf(expr)->UnwrapRef(), core::AddressSpace::kUndefined, |
| core::Access::kReadWrite, ""); |
| out << "(bitCount("; |
| EmitExpression(out, expr->args[0]); |
| out << "))"; |
| } |
| |
| void ASTPrinter::EmitSelectCall(StringStream& out, |
| const ast::CallExpression* expr, |
| const sem::BuiltinFn* builtin) { |
| auto* expr_false = expr->args[0]; |
| auto* expr_true = expr->args[1]; |
| auto* expr_cond = expr->args[2]; |
| |
| out << "mix"; |
| ScopedParen paren(out); |
| |
| EmitExpression(out, expr_false); |
| out << ", "; |
| EmitExpression(out, expr_true); |
| out << ", "; |
| |
| auto* p0_ty = builtin->Parameters()[0]->Type(); |
| auto* p2_ty = builtin->Parameters()[2]->Type(); |
| |
| // If the value types are vectors, but the condition is a single bool, splat the bool into a |
| // vector of equivalent size. |
| if (p0_ty->Is<core::type::Vector>() && !p2_ty->Is<core::type::Vector>()) { |
| auto* vec = p0_ty->As<core::type::Vector>(); |
| out << "bvec" << vec->Width(); |
| ScopedParen cast_paren(out); |
| EmitExpression(out, expr_cond); |
| } else { |
| EmitExpression(out, expr_cond); |
| } |
| } |
| |
| void ASTPrinter::EmitDotCall(StringStream& out, |
| const ast::CallExpression* expr, |
| const sem::BuiltinFn* builtin) { |
| auto* vec_ty = builtin->Parameters()[0]->Type()->As<core::type::Vector>(); |
| std::string fn = "dot"; |
| if (vec_ty->Type()->IsIntegerScalar()) { |
| // GLSL does not have a builtin for dot() with integer vector types. |
| // Generate the helper function if it hasn't been created already |
| fn = tint::GetOrAdd(int_dot_funcs_, vec_ty, [&]() -> std::string { |
| TextBuffer b; |
| TINT_DEFER(helpers_.Append(b)); |
| |
| auto fn_name = UniqueIdentifier("tint_int_dot"); |
| |
| std::string v; |
| { |
| StringStream s; |
| EmitType(s, vec_ty->Type(), core::AddressSpace::kUndefined, core::Access::kRead, |
| ""); |
| v = s.str(); |
| } |
| { // (u)int tint_int_dot([i|u]vecN a, [i|u]vecN b) { |
| auto l = Line(&b); |
| EmitType(l, vec_ty->Type(), core::AddressSpace::kUndefined, core::Access::kRead, |
| ""); |
| l << " " << fn_name << "("; |
| EmitType(l, vec_ty, core::AddressSpace::kUndefined, core::Access::kRead, ""); |
| l << " a, "; |
| EmitType(l, vec_ty, core::AddressSpace::kUndefined, core::Access::kRead, ""); |
| l << " b) {"; |
| } |
| { |
| auto l = Line(&b); |
| l << " return "; |
| for (uint32_t i = 0; i < vec_ty->Width(); i++) { |
| if (i > 0) { |
| l << " + "; |
| } |
| l << "a[" << i << "]*b[" << i << "]"; |
| } |
| l << ";"; |
| } |
| Line(&b) << "}"; |
| return fn_name; |
| }); |
| } |
| |
| out << fn; |
| ScopedParen sp(out); |
| |
| EmitExpression(out, expr->args[0]); |
| out << ", "; |
| EmitExpression(out, expr->args[1]); |
| } |
| |
| void ASTPrinter::EmitModfCall(StringStream& out, |
| const ast::CallExpression* expr, |
| const sem::BuiltinFn* builtin) { |
| TINT_ASSERT(expr->args.Length() == 1); |
| CallBuiltinHelper( |
| out, expr, builtin, [&](TextBuffer* b, const std::vector<std::string>& params) { |
| // Emit the builtin return type unique to this overload. This does not |
| // exist in the AST, so it will not be generated in Generate(). |
| EmitStructType(&helpers_, builtin->ReturnType()->As<core::type::Struct>()); |
| |
| { |
| auto l = Line(b); |
| EmitType(l, builtin->ReturnType(), core::AddressSpace::kUndefined, |
| core::Access::kUndefined, ""); |
| l << " result;"; |
| } |
| Line(b) << "result.fract = modf(" << params[0] << ", result.whole);"; |
| Line(b) << "return result;"; |
| }); |
| } |
| |
| void ASTPrinter::EmitFrexpCall(StringStream& out, |
| const ast::CallExpression* expr, |
| const sem::BuiltinFn* builtin) { |
| TINT_ASSERT(expr->args.Length() == 1); |
| CallBuiltinHelper( |
| out, expr, builtin, [&](TextBuffer* b, const std::vector<std::string>& params) { |
| // Emit the builtin return type unique to this overload. This does not |
| // exist in the AST, so it will not be generated in Generate(). |
| EmitStructType(&helpers_, builtin->ReturnType()->As<core::type::Struct>()); |
| |
| { |
| auto l = Line(b); |
| EmitType(l, builtin->ReturnType(), core::AddressSpace::kUndefined, |
| core::Access::kUndefined, ""); |
| l << " result;"; |
| } |
| Line(b) << "result.fract = frexp(" << params[0] << ", result.exp);"; |
| Line(b) << "return result;"; |
| }); |
| } |
| |
| void ASTPrinter::EmitDegreesCall(StringStream& out, |
| const ast::CallExpression* expr, |
| const sem::BuiltinFn* builtin) { |
| auto* return_elem_type = builtin->ReturnType()->DeepestElement(); |
| const std::string suffix = Is<core::type::F16>(return_elem_type) ? "hf" : "f"; |
| CallBuiltinHelper(out, expr, builtin, |
| [&](TextBuffer* b, const std::vector<std::string>& params) { |
| Line(b) << "return " << params[0] << " * " << std::setprecision(20) |
| << sem::kRadToDeg << suffix << ";"; |
| }); |
| } |
| |
| void ASTPrinter::EmitRadiansCall(StringStream& out, |
| const ast::CallExpression* expr, |
| const sem::BuiltinFn* builtin) { |
| auto* return_elem_type = builtin->ReturnType()->DeepestElement(); |
| const std::string suffix = Is<core::type::F16>(return_elem_type) ? "hf" : "f"; |
| CallBuiltinHelper(out, expr, builtin, |
| [&](TextBuffer* b, const std::vector<std::string>& params) { |
| Line(b) << "return " << params[0] << " * " << std::setprecision(20) |
| << sem::kDegToRad << suffix << ";"; |
| }); |
| } |
| |
| void ASTPrinter::EmitQuantizeToF16Call(StringStream& out, |
| const ast::CallExpression* expr, |
| const sem::BuiltinFn* builtin) { |
| // Emulate by casting to f16 and back again. |
| CallBuiltinHelper( |
| out, expr, builtin, [&](TextBuffer* b, const std::vector<std::string>& params) { |
| const auto v = params[0]; |
| if (auto* vec = builtin->ReturnType()->As<core::type::Vector>()) { |
| switch (vec->Width()) { |
| case 2: { |
| Line(b) << "return unpackHalf2x16(packHalf2x16(" << v << "));"; |
| return; |
| } |
| case 3: { |
| Line(b) << "return vec3("; |
| Line(b) << " unpackHalf2x16(packHalf2x16(" << v << ".xy)),"; |
| Line(b) << " unpackHalf2x16(packHalf2x16(" << v << ".zz)).x);"; |
| return; |
| } |
| default: { |
| Line(b) << "return vec4("; |
| Line(b) << " unpackHalf2x16(packHalf2x16(" << v << ".xy)),"; |
| Line(b) << " unpackHalf2x16(packHalf2x16(" << v << ".zw)));"; |
| return; |
| } |
| } |
| } |
| Line(b) << "return unpackHalf2x16(packHalf2x16(vec2(" << v << "))).x;"; |
| }); |
| } |
| |
| void ASTPrinter::EmitBarrierCall(StringStream& out, const sem::BuiltinFn* builtin) { |
| // TODO(crbug.com/tint/661): Combine sequential barriers to a single |
| // instruction. |
| if (builtin->Fn() == wgsl::BuiltinFn::kWorkgroupBarrier) { |
| out << "barrier()"; |
| } else if (builtin->Fn() == wgsl::BuiltinFn::kStorageBarrier) { |
| out << "{ memoryBarrierBuffer(); barrier(); }"; |
| } else if (builtin->Fn() == wgsl::BuiltinFn::kTextureBarrier) { |
| out << "{ memoryBarrierImage(); barrier(); }"; |
| } else { |
| TINT_UNREACHABLE() << "unexpected barrier builtin type " << builtin->Fn(); |
| } |
| } |
| |
| const ast::Expression* ASTPrinter::CreateF32Zero(const sem::Statement* stmt) { |
| auto* zero = builder_.Expr(0_f); |
| auto* f32 = builder_.create<core::type::F32>(); |
| auto* sem_zero = builder_.create<sem::ValueExpression>( |
| zero, f32, core::EvaluationStage::kRuntime, stmt, /* constant_value */ nullptr, |
| /* has_side_effects */ false); |
| builder_.Sem().Add(zero, sem_zero); |
| return zero; |
| } |
| |
| void ASTPrinter::EmitTextureCall(StringStream& out, |
| const sem::Call* call, |
| const sem::BuiltinFn* builtin) { |
| using Usage = core::ParameterUsage; |
| |
| auto& signature = builtin->Signature(); |
| auto* expr = call->Declaration(); |
| auto arguments = expr->args; |
| |
| // Returns the argument with the given usage |
| auto arg = [&](Usage usage) { |
| auto idx = signature.IndexOf(usage); |
| return (idx >= 0) ? arguments[static_cast<size_t>(idx)] : nullptr; |
| }; |
| |
| auto* texture = arg(Usage::kTexture); |
| if (DAWN_UNLIKELY(!texture)) { |
| TINT_ICE() << "missing texture argument"; |
| } |
| |
| auto* texture_type = TypeOf(texture)->UnwrapRef()->As<core::type::Texture>(); |
| |
| auto emit_signed_int_type = [&](const core::type::Type* ty) { |
| uint32_t width = ty->Elements().count; |
| if (width > 1) { |
| out << "ivec" << width; |
| } else { |
| out << "int"; |
| } |
| }; |
| |
| auto emit_unsigned_int_type = [&](const core::type::Type* ty) { |
| uint32_t width = ty->Elements().count; |
| if (width > 1) { |
| out << "uvec" << width; |
| } else { |
| out << "uint"; |
| } |
| }; |
| |
| auto emit_expr_as_signed = [&](const ast::Expression* e) { |
| auto* ty = TypeOf(e)->UnwrapRef(); |
| if (!ty->IsUnsignedIntegerScalarOrVector()) { |
| EmitExpression(out, e); |
| return; |
| } |
| emit_signed_int_type(ty); |
| ScopedParen sp(out); |
| EmitExpression(out, e); |
| return; |
| }; |
| |
| switch (builtin->Fn()) { |
| case wgsl::BuiltinFn::kTextureDimensions: { |
| // textureDimensions() returns an unsigned scalar / vector in WGSL. |
| // textureSize() / imageSize() returns a signed scalar / vector in GLSL. |
| // Cast. |
| emit_unsigned_int_type(call->Type()); |
| ScopedParen sp(out); |
| |
| if (texture_type->Is<core::type::StorageTexture>()) { |
| out << "imageSize("; |
| } else { |
| out << "textureSize("; |
| } |
| EmitExpression(out, texture); |
| |
| // The LOD parameter is mandatory on textureSize() for non-multisampled |
| // textures. |
| if (!texture_type->Is<core::type::StorageTexture>() && |
| !texture_type->Is<core::type::MultisampledTexture>() && |
| !texture_type->Is<core::type::DepthMultisampledTexture>()) { |
| out << ", "; |
| if (auto* level_arg = arg(Usage::kLevel)) { |
| emit_expr_as_signed(level_arg); |
| } else { |
| out << "0"; |
| } |
| } |
| out << ")"; |
| // textureSize() on array samplers returns the array size in the |
| // final component, so strip it out. |
| if (texture_type->Dim() == core::type::TextureDimension::k2dArray || |
| texture_type->Dim() == core::type::TextureDimension::kCubeArray) { |
| out << ".xy"; |
| } |
| return; |
| } |
| case wgsl::BuiltinFn::kTextureNumLayers: { |
| // textureNumLayers() returns an unsigned scalar in WGSL. |
| // textureSize() / imageSize() returns a signed scalar / vector in GLSL. |
| // Cast. |
| out << "uint"; |
| ScopedParen sp(out); |
| |
| if (texture_type->Is<core::type::StorageTexture>()) { |
| out << "imageSize("; |
| } else { |
| out << "textureSize("; |
| } |
| // textureSize() on sampler2dArray returns the array size in the |
| // final component, so return it |
| EmitExpression(out, texture); |
| |
| // The LOD parameter is mandatory on textureSize() for non-multisampled |
| // textures. |
| if (!texture_type->Is<core::type::StorageTexture>() && |
| !texture_type->Is<core::type::MultisampledTexture>() && |
| !texture_type->Is<core::type::DepthMultisampledTexture>()) { |
| out << ", "; |
| if (auto* level_arg = arg(Usage::kLevel)) { |
| emit_expr_as_signed(level_arg); |
| } else { |
| out << "0"; |
| } |
| } |
| out << ").z"; |
| return; |
| } |
| case wgsl::BuiltinFn::kTextureNumLevels: { |
| // textureNumLevels() returns an unsigned scalar in WGSL. |
| // textureQueryLevels() returns a signed scalar in GLSL. |
| // Cast. |
| out << "uint"; |
| ScopedParen sp(out); |
| |
| out << "textureQueryLevels("; |
| EmitExpression(out, texture); |
| out << ")"; |
| return; |
| } |
| case wgsl::BuiltinFn::kTextureNumSamples: { |
| // textureNumSamples() returns an unsigned scalar in WGSL. |
| // textureSamples() returns a signed scalar in GLSL. |
| // Cast. |
| out << "uint"; |
| ScopedParen sp(out); |
| |
| out << "textureSamples("; |
| EmitExpression(out, texture); |
| out << ")"; |
| return; |
| } |
| default: |
| break; |
| } |
| |
| uint32_t glsl_ret_width = 4u; |
| bool append_depth_ref_to_coords = true; |
| bool is_depth = texture_type->Is<core::type::DepthTexture>(); |
| bool is_array = IsTextureArray(texture_type->Dim()); |
| |
| switch (builtin->Fn()) { |
| case wgsl::BuiltinFn::kTextureSample: |
| case wgsl::BuiltinFn::kTextureSampleBias: |
| out << "texture"; |
| if (is_depth) { |
| glsl_ret_width = 1u; |
| } |
| break; |
| case wgsl::BuiltinFn::kTextureSampleLevel: |
| out << "textureLod"; |
| if (is_depth) { |
| glsl_ret_width = 1u; |
| } |
| break; |
| case wgsl::BuiltinFn::kTextureGather: |
| case wgsl::BuiltinFn::kTextureGatherCompare: |
| out << "textureGather"; |
| append_depth_ref_to_coords = false; |
| break; |
| case wgsl::BuiltinFn::kTextureSampleGrad: |
| out << "textureGrad"; |
| break; |
| case wgsl::BuiltinFn::kTextureSampleCompare: |
| case wgsl::BuiltinFn::kTextureSampleCompareLevel: |
| out << "texture"; |
| glsl_ret_width = 1; |
| break; |
| case wgsl::BuiltinFn::kTextureLoad: |
| if (texture_type->Is<core::type::StorageTexture>()) { |
| out << "imageLoad"; |
| } else { |
| out << "texelFetch"; |
| } |
| break; |
| case wgsl::BuiltinFn::kTextureStore: |
| out << "imageStore"; |
| break; |
| default: |
| TINT_ICE() << "Unhandled texture builtin '" << std::string(builtin->str()) << "'"; |
| } |
| |
| bool supplyDerivativesAsGradients = false; |
| if (builtin->Signature().IndexOf(core::ParameterUsage::kOffset) >= 0) { |
| if ((builtin->Fn() == wgsl::BuiltinFn::kTextureSample || |
| builtin->Fn() == wgsl::BuiltinFn::kTextureSampleCompare) && |
| is_depth && is_array) { |
| out << "Grad"; |
| supplyDerivativesAsGradients = true; |
| } |
| out << "Offset"; |
| } |
| |
| out << "("; |
| EmitExpression(out, texture); |
| out << ", "; |
| |
| auto* param_coords = arg(Usage::kCoords); |
| if (DAWN_UNLIKELY(!param_coords)) { |
| TINT_ICE() << "missing coords argument"; |
| } |
| |
| if (auto* array_index = arg(Usage::kArrayIndex)) { |
| // Array index needs to be appended to the coordinates. |
| param_coords = |
| tint::wgsl::AppendVector(&builder_, param_coords, array_index)->Declaration(); |
| } |
| |
| // GLSL requires Dref to be appended to the coordinates, *unless* it's |
| // samplerCubeArrayShadow, in which case it will be handled as a separate |
| // parameter. |
| if (texture_type->Dim() == core::type::TextureDimension::kCubeArray) { |
| append_depth_ref_to_coords = false; |
| } |
| |
| if (is_depth && append_depth_ref_to_coords) { |
| auto* depth_ref = arg(Usage::kDepthRef); |
| if (!depth_ref) { |
| // Sampling a depth texture in GLSL always requires a depth reference, so |
| // append zero here. |
| depth_ref = CreateF32Zero(builder_.Sem().Get(param_coords)->Stmt()); |
| } |
| param_coords = tint::wgsl::AppendVector(&builder_, param_coords, depth_ref)->Declaration(); |
| } |
| |
| emit_expr_as_signed(param_coords); |
| |
| if (supplyDerivativesAsGradients) { |
| auto* coords = arg(Usage::kCoords); |
| out << ", dFdx("; |
| EmitExpression(out, coords); |
| out << "), dFdy("; |
| EmitExpression(out, coords); |
| out << ")"; |
| } |
| for (auto usage : {Usage::kLevel, Usage::kDdx, Usage::kDdy, Usage::kSampleIndex}) { |
| if (auto* e = arg(usage)) { |
| out << ", "; |
| if (usage == Usage::kLevel && is_depth) { |
| // WGSL's textureSampleLevel() "level" param is i32 for depth textures, |
| // whereas GLSL's textureLod() "lod" param is always float, so cast it. |
| out << "float("; |
| EmitExpression(out, e); |
| out << ")"; |
| } else { |
| emit_expr_as_signed(e); |
| } |
| } |
| } |
| |
| if (auto* e = arg(Usage::kValue)) { |
| out << ", "; |
| EmitExpression(out, e); |
| } |
| |
| // GLSL's textureGather always requires a refZ parameter. |
| if (is_depth && builtin->Fn() == wgsl::BuiltinFn::kTextureGather) { |
| out << ", 0.0"; |
| } |
| |
| // [1] samplerCubeArrayShadow requires a separate depthRef parameter |
| if (is_depth && !append_depth_ref_to_coords) { |
| if (auto* e = arg(Usage::kDepthRef)) { |
| out << ", "; |
| EmitExpression(out, e); |
| } else if (builtin->Fn() == wgsl::BuiltinFn::kTextureSample) { |
| out << ", 0.0f"; |
| } |
| } |
| |
| for (auto usage : {Usage::kOffset, Usage::kComponent, Usage::kBias}) { |
| if (auto* e = arg(usage)) { |
| out << ", "; |
| emit_expr_as_signed(e); |
| } |
| } |
| |
| out << ")"; |
| |
| if (builtin->ReturnType()->Is<core::type::Void>()) { |
| return; |
| } |
| // If the builtin return type does not match the number of elements of the |
| // GLSL builtin, we need to swizzle the expression to generate the correct |
| // number of components. |
| uint32_t wgsl_ret_width = 1; |
| if (auto* vec = builtin->ReturnType()->As<core::type::Vector>()) { |
| wgsl_ret_width = vec->Width(); |
| } |
| if (wgsl_ret_width < glsl_ret_width) { |
| out << "."; |
| for (uint32_t i = 0; i < wgsl_ret_width; i++) { |
| out << "xyz"[i]; |
| } |
| } |
| if (DAWN_UNLIKELY(wgsl_ret_width > glsl_ret_width)) { |
| TINT_ICE() << "WGSL return width (" << wgsl_ret_width |
| << ") is wider than GLSL return width (" << glsl_ret_width << ") for " |
| << builtin->Fn(); |
| } |
| } |
| |
| std::string ASTPrinter::generate_builtin_name(const sem::BuiltinFn* builtin) { |
| switch (builtin->Fn()) { |
| case wgsl::BuiltinFn::kAbs: |
| case wgsl::BuiltinFn::kAcos: |
| case wgsl::BuiltinFn::kAcosh: |
| case wgsl::BuiltinFn::kAll: |
| case wgsl::BuiltinFn::kAny: |
| case wgsl::BuiltinFn::kAsin: |
| case wgsl::BuiltinFn::kAsinh: |
| case wgsl::BuiltinFn::kAtan: |
| case wgsl::BuiltinFn::kAtanh: |
| case wgsl::BuiltinFn::kCeil: |
| case wgsl::BuiltinFn::kClamp: |
| case wgsl::BuiltinFn::kCos: |
| case wgsl::BuiltinFn::kCosh: |
| case wgsl::BuiltinFn::kCross: |
| case wgsl::BuiltinFn::kDeterminant: |
| case wgsl::BuiltinFn::kDistance: |
| case wgsl::BuiltinFn::kDot: |
| case wgsl::BuiltinFn::kExp: |
| case wgsl::BuiltinFn::kExp2: |
| case wgsl::BuiltinFn::kFloor: |
| case wgsl::BuiltinFn::kFrexp: |
| case wgsl::BuiltinFn::kLdexp: |
| case wgsl::BuiltinFn::kLength: |
| case wgsl::BuiltinFn::kLog: |
| case wgsl::BuiltinFn::kLog2: |
| case wgsl::BuiltinFn::kMax: |
| case wgsl::BuiltinFn::kMin: |
| case wgsl::BuiltinFn::kModf: |
| case wgsl::BuiltinFn::kNormalize: |
| case wgsl::BuiltinFn::kPow: |
| case wgsl::BuiltinFn::kReflect: |
| case wgsl::BuiltinFn::kRefract: |
| case wgsl::BuiltinFn::kRound: |
| case wgsl::BuiltinFn::kSign: |
| case wgsl::BuiltinFn::kSin: |
| case wgsl::BuiltinFn::kSinh: |
| case wgsl::BuiltinFn::kSqrt: |
| case wgsl::BuiltinFn::kStep: |
| case wgsl::BuiltinFn::kTan: |
| case wgsl::BuiltinFn::kTanh: |
| case wgsl::BuiltinFn::kTranspose: |
| case wgsl::BuiltinFn::kTrunc: |
| return builtin->str(); |
| case wgsl::BuiltinFn::kAtan2: |
| return "atan"; |
| case wgsl::BuiltinFn::kCountOneBits: |
| return "bitCount"; |
| case wgsl::BuiltinFn::kDpdx: |
| return "dFdx"; |
| case wgsl::BuiltinFn::kDpdxCoarse: |
| if (version_.IsES()) { |
| return "dFdx"; |
| } |
| return "dFdxCoarse"; |
| case wgsl::BuiltinFn::kDpdxFine: |
| if (version_.IsES()) { |
| return "dFdx"; |
| } |
| return "dFdxFine"; |
| case wgsl::BuiltinFn::kDpdy: |
| return "dFdy"; |
| case wgsl::BuiltinFn::kDpdyCoarse: |
| if (version_.IsES()) { |
| return "dFdy"; |
| } |
| return "dFdyCoarse"; |
| case wgsl::BuiltinFn::kDpdyFine: |
| if (version_.IsES()) { |
| return "dFdy"; |
| } |
| return "dFdyFine"; |
| case wgsl::BuiltinFn::kFaceForward: |
| return "faceforward"; |
| case wgsl::BuiltinFn::kFract: |
| return "fract"; |
| case wgsl::BuiltinFn::kFma: |
| return "fma"; |
| case wgsl::BuiltinFn::kFwidth: |
| case wgsl::BuiltinFn::kFwidthCoarse: |
| case wgsl::BuiltinFn::kFwidthFine: |
| return "fwidth"; |
| case wgsl::BuiltinFn::kInverseSqrt: |
| return "inversesqrt"; |
| case wgsl::BuiltinFn::kMix: |
| return "mix"; |
| case wgsl::BuiltinFn::kPack2X16Float: |
| return "packHalf2x16"; |
| case wgsl::BuiltinFn::kPack2X16Snorm: |
| return "packSnorm2x16"; |
| case wgsl::BuiltinFn::kPack2X16Unorm: |
| return "packUnorm2x16"; |
| case wgsl::BuiltinFn::kPack4X8Snorm: |
| return "packSnorm4x8"; |
| case wgsl::BuiltinFn::kPack4X8Unorm: |
| return "packUnorm4x8"; |
| case wgsl::BuiltinFn::kReverseBits: |
| return "bitfieldReverse"; |
| case wgsl::BuiltinFn::kSmoothstep: |
| return "smoothstep"; |
| case wgsl::BuiltinFn::kUnpack2X16Float: |
| return "unpackHalf2x16"; |
| case wgsl::BuiltinFn::kUnpack2X16Snorm: |
| return "unpackSnorm2x16"; |
| case wgsl::BuiltinFn::kUnpack2X16Unorm: |
| return "unpackUnorm2x16"; |
| case wgsl::BuiltinFn::kUnpack4X8Snorm: |
| return "unpackSnorm4x8"; |
| case wgsl::BuiltinFn::kUnpack4X8Unorm: |
| return "unpackUnorm4x8"; |
| default: |
| diagnostics_.AddError(Source{}) << "Unknown builtin method: " << builtin; |
| } |
| |
| return ""; |
| } |
| |
| void ASTPrinter::EmitCase(const ast::CaseStatement* stmt) { |
| auto* sem = builder_.Sem().Get<sem::CaseStatement>(stmt); |
| for (auto* selector : sem->Selectors()) { |
| auto out = Line(); |
| |
| if (selector->IsDefault()) { |
| out << "default"; |
| } else { |
| out << "case "; |
| EmitConstant(out, selector->Value()); |
| } |
| out << ":"; |
| if (selector == sem->Selectors().back()) { |
| out << " {"; |
| } |
| } |
| |
| { |
| ScopedIndent si(this); |
| EmitStatements(stmt->body->statements); |
| if (!last_is_break(stmt->body)) { |
| Line() << "break;"; |
| } |
| } |
| |
| Line() << "}"; |
| } |
| |
| void ASTPrinter::EmitContinue(const ast::ContinueStatement*) { |
| if (emit_continuing_) { |
| emit_continuing_(); |
| } |
| Line() << "continue;"; |
| } |
| |
| void ASTPrinter::EmitDiscard(const ast::DiscardStatement*) { |
| // TODO(dsinclair): Verify this is correct when the discard semantics are |
| // defined for WGSL (https://github.com/gpuweb/gpuweb/issues/361) |
| Line() << "discard;"; |
| } |
| |
| void ASTPrinter::EmitExpression(StringStream& out, const ast::Expression* expr) { |
| if (auto* sem = builder_.Sem().GetVal(expr)) { |
| if (auto* constant = sem->ConstantValue()) { |
| EmitConstant(out, constant); |
| return; |
| } |
| } |
| Switch( |
| expr, // |
| [&](const ast::IndexAccessorExpression* a) { EmitIndexAccessor(out, a); }, |
| [&](const ast::BinaryExpression* b) { EmitBinary(out, b); }, |
| [&](const ast::CallExpression* c) { EmitCall(out, c); }, |
| [&](const ast::IdentifierExpression* i) { EmitIdentifier(out, i); }, |
| [&](const ast::LiteralExpression* l) { EmitLiteral(out, l); }, |
| [&](const ast::MemberAccessorExpression* m) { EmitMemberAccessor(out, m); }, |
| [&](const ast::UnaryOpExpression* u) { EmitUnaryOp(out, u); }, // |
| TINT_ICE_ON_NO_MATCH); |
| } |
| |
| void ASTPrinter::EmitIdentifier(StringStream& out, const ast::IdentifierExpression* expr) { |
| out << expr->identifier->symbol.Name(); |
| } |
| |
| void ASTPrinter::EmitIf(const ast::IfStatement* stmt) { |
| { |
| auto out = Line(); |
| out << "if ("; |
| EmitExpression(out, stmt->condition); |
| out << ") {"; |
| } |
| EmitStatementsWithIndent(stmt->body->statements); |
| |
| if (stmt->else_statement) { |
| Line() << "} else {"; |
| if (auto* block = stmt->else_statement->As<ast::BlockStatement>()) { |
| EmitStatementsWithIndent(block->statements); |
| } else { |
| EmitStatementsWithIndent(Vector{stmt->else_statement}); |
| } |
| } |
| Line() << "}"; |
| } |
| |
| void ASTPrinter::EmitFunction(const ast::Function* func) { |
| auto* sem = builder_.Sem().Get(func); |
| |
| if (ast::HasAttribute<ast::InternalAttribute>(func->attributes)) { |
| // An internal function. Do not emit. |
| return; |
| } |
| |
| { |
| auto out = Line(); |
| auto name = func->name->symbol.Name(); |
| EmitType(out, sem->ReturnType(), core::AddressSpace::kUndefined, core::Access::kReadWrite, |
| ""); |
| out << " " << name << "("; |
| |
| bool first = true; |
| for (auto* v : sem->Parameters()) { |
| if (!first) { |
| out << ", "; |
| } |
| first = false; |
| |
| auto const* type = v->Type(); |
| |
| if (auto* ptr = type->As<core::type::Pointer>()) { |
| // Transform pointer parameters in to `inout` parameters. |
| // The WGSL spec is highly restrictive in what can be passed in pointer |
| // parameters, which allows for this transformation. See: |
| // https://gpuweb.github.io/gpuweb/wgsl/#function-restriction |
| out << "inout "; |
| type = ptr->StoreType(); |
| } |
| |
| // Note: WGSL only allows for AddressSpace::kUndefined on parameters, however |
| // the sanitizer transforms generates load / store functions for storage |
| // or uniform buffers. These functions have a buffer parameter with |
| // AddressSpace::kStorage or AddressSpace::kUniform. This is required to |
| // correctly translate the parameter to a [RW]ByteAddressBuffer for |
| // storage buffers and a uint4[N] for uniform buffers. |
| EmitTypeAndName(out, type, v->AddressSpace(), v->Access(), |
| v->Declaration()->name->symbol.Name()); |
| } |
| out << ") {"; |
| } |
| |
| EmitStatementsWithIndent(func->body->statements); |
| |
| Line() << "}"; |
| Line(); |
| } |
| |
| void ASTPrinter::EmitGlobalVariable(const ast::Variable* global) { |
| Switch( |
| global, // |
| [&](const ast::Var* var) { |
| auto* sem = builder_.Sem().Get<sem::GlobalVariable>(global); |
| switch (sem->AddressSpace()) { |
| case core::AddressSpace::kUniform: |
| EmitUniformVariable(var, sem); |
| return; |
| case core::AddressSpace::kStorage: |
| EmitStorageVariable(var, sem); |
| return; |
| case core::AddressSpace::kHandle: |
| EmitHandleVariable(var, sem); |
| return; |
| case core::AddressSpace::kPrivate: |
| EmitPrivateVariable(sem); |
| return; |
| case core::AddressSpace::kWorkgroup: |
| EmitWorkgroupVariable(sem); |
| return; |
| case core::AddressSpace::kIn: |
| case core::AddressSpace::kOut: |
| EmitIOVariable(sem); |
| return; |
| case core::AddressSpace::kPushConstant: |
| EmitPushConstant(sem); |
| return; |
| default: { |
| TINT_ICE() << "unhandled address space " << sem->AddressSpace(); |
| } |
| } |
| }, |
| [&](const ast::Let* let) { EmitProgramConstVariable(let); }, |
| [&](const ast::Override*) { |
| // Override is removed with SubstituteOverride |
| diagnostics_.AddError(Source{}) |
| << "override-expressions should have been removed with the " |
| "SubstituteOverride transform"; |
| }, |
| [&](const ast::Const*) { |
| // Constants are embedded at their use |
| }, // |
| TINT_ICE_ON_NO_MATCH); |
| } |
| |
| void ASTPrinter::EmitUniformVariable(const ast::Var* var, const sem::GlobalVariable* sem) { |
| auto* type = sem->Type()->UnwrapRef(); |
| auto* str = type->As<core::type::Struct>(); |
| if (DAWN_UNLIKELY(!str)) { |
| TINT_ICE() << "storage variable must be of struct type"; |
| } |
| auto bp = *sem->Attributes().binding_point; |
| { |
| auto out = Line(); |
| out << "layout(binding = " << bp.binding << ", std140"; |
| out << ") uniform " << UniqueIdentifier(StructName(str) + "_ubo") << " {"; |
| } |
| EmitStructMembers(current_buffer_, str); |
| auto name = var->name->symbol.Name(); |
| Line() << "} " << name << ";"; |
| Line(); |
| } |
| |
| void ASTPrinter::EmitStorageVariable(const ast::Var* var, const sem::GlobalVariable* sem) { |
| auto* type = sem->Type()->UnwrapRef(); |
| auto* str = type->As<core::type::Struct>(); |
| if (DAWN_UNLIKELY(!str)) { |
| TINT_ICE() << "storage variable must be of struct type"; |
| } |
| auto bp = *sem->Attributes().binding_point; |
| Line() << "layout(binding = " << bp.binding << ", std430) buffer " |
| << UniqueIdentifier(StructName(str) + "_ssbo") << " {"; |
| EmitStructMembers(current_buffer_, str); |
| auto name = var->name->symbol.Name(); |
| Line() << "} " << name << ";"; |
| Line(); |
| } |
| |
| void ASTPrinter::EmitHandleVariable(const ast::Var* var, const sem::GlobalVariable* sem) { |
| auto out = Line(); |
| |
| auto name = var->name->symbol.Name(); |
| auto* type = sem->Type()->UnwrapRef(); |
| if (type->Is<core::type::Sampler>()) { |
| // GLSL ignores Sampler variables. |
| return; |
| } |
| |
| if (auto* storage = type->As<core::type::StorageTexture>()) { |
| auto bp = *sem->Attributes().binding_point; |
| out << "layout(binding = " << bp.binding << ", "; |
| switch (storage->TexelFormat()) { |
| case core::TexelFormat::kBgra8Unorm: |
| TINT_ICE() << "bgra8unorm should have been polyfilled to rgba8unorm"; |
| case core::TexelFormat::kR32Uint: |
| out << "r32ui"; |
| break; |
| case core::TexelFormat::kR32Sint: |
| out << "r32i"; |
| break; |
| case core::TexelFormat::kR32Float: |
| out << "r32f"; |
| break; |
| case core::TexelFormat::kRgba8Unorm: |
| out << "rgba8"; |
| break; |
| case core::TexelFormat::kRgba8Snorm: |
| out << "rgba8_snorm"; |
| break; |
| case core::TexelFormat::kRgba8Uint: |
| out << "rgba8ui"; |
| break; |
| case core::TexelFormat::kRgba8Sint: |
| out << "rgba8i"; |
| break; |
| case core::TexelFormat::kRg32Uint: |
| out << "rg32ui"; |
| break; |
| case core::TexelFormat::kRg32Sint: |
| out << "rg32i"; |
| break; |
| case core::TexelFormat::kRg32Float: |
| out << "rg32f"; |
| break; |
| case core::TexelFormat::kRgba16Uint: |
| out << "rgba16ui"; |
| break; |
| case core::TexelFormat::kRgba16Sint: |
| out << "rgba16i"; |
| break; |
| case core::TexelFormat::kRgba16Float: |
| out << "rgba16f"; |
| break; |
| case core::TexelFormat::kRgba32Uint: |
| out << "rgba32ui"; |
| break; |
| case core::TexelFormat::kRgba32Sint: |
| out << "rgba32i"; |
| break; |
| case core::TexelFormat::kRgba32Float: |
| out << "rgba32f"; |
| break; |
| case core::TexelFormat::kR8Unorm: |
| out << "r8"; |
| break; |
| case core::TexelFormat::kUndefined: |
| TINT_ICE() << "invalid texel format"; |
| } |
| out << ") "; |
| } |
| EmitTypeAndName(out, type, sem->AddressSpace(), sem->Access(), name); |
| out << ";"; |
| } |
| |
| void ASTPrinter::EmitPrivateVariable(const sem::Variable* var) { |
| auto* decl = var->Declaration(); |
| auto out = Line(); |
| |
| auto name = decl->name->symbol.Name(); |
| auto* type = var->Type()->UnwrapRef(); |
| EmitTypeAndName(out, type, var->AddressSpace(), var->Access(), name); |
| |
| out << " = "; |
| if (auto* initializer = decl->initializer) { |
| EmitExpression(out, initializer); |
| } else { |
| EmitZeroValue(out, var->Type()->UnwrapRef()); |
| } |
| out << ";"; |
| } |
| |
| void ASTPrinter::EmitWorkgroupVariable(const sem::Variable* var) { |
| auto* decl = var->Declaration(); |
| auto out = Line(); |
| |
| out << "shared "; |
| |
| auto name = decl->name->symbol.Name(); |
| auto* type = var->Type()->UnwrapRef(); |
| EmitTypeAndName(out, type, var->AddressSpace(), var->Access(), name); |
| |
| if (auto* initializer = decl->initializer) { |
| out << " = "; |
| EmitExpression(out, initializer); |
| } |
| |
| out << ";"; |
| } |
| |
| void ASTPrinter::EmitIOVariable(const sem::GlobalVariable* var) { |
| auto* decl = var->Declaration(); |
| |
| if (auto* attr = ast::GetAttribute<ast::BuiltinAttribute>(decl->attributes)) { |
| // Use of gl_SampleID requires the GL_OES_sample_variables extension |
| if (RequiresOESSampleVariables(attr->builtin)) { |
| requires_oes_sample_variables_ = true; |
| } |
| // Do not emit builtin (gl_) variables. |
| return; |
| } |
| |
| auto out = Line(); |
| EmitAttributes(out, var); |
| EmitInterpolationQualifiers(out, decl->attributes); |
| |
| auto name = decl->name->symbol.Name(); |
| auto* type = var->Type()->UnwrapRef(); |
| EmitTypeAndName(out, type, var->AddressSpace(), var->Access(), name); |
| |
| if (auto* initializer = decl->initializer) { |
| out << " = "; |
| EmitExpression(out, initializer); |
| } |
| out << ";"; |
| } |
| |
| void ASTPrinter::EmitPushConstant(const sem::GlobalVariable* var) { |
| auto* decl = var->Declaration(); |
| |
| auto out = Line(); |
| |
| auto name = decl->name->symbol.Name(); |
| auto* type = var->Type()->UnwrapRef(); |
| out << "layout(location=0) "; |
| EmitTypeAndName(out, type, var->AddressSpace(), var->Access(), name); |
| out << ";"; |
| } |
| |
| void ASTPrinter::EmitInterpolationQualifiers(StringStream& out, |
| VectorRef<const ast::Attribute*> attributes) { |
| for (auto* attr : attributes) { |
| if (auto* interpolate = attr->As<ast::InterpolateAttribute>()) { |
| switch (interpolate->interpolation.type) { |
| case core::InterpolationType::kPerspective: |
| case core::InterpolationType::kLinear: |
| case core::InterpolationType::kUndefined: |
| break; |
| case core::InterpolationType::kFlat: |
| out << "flat "; |
| break; |
| } |
| |
| switch (interpolate->interpolation.sampling) { |
| case core::InterpolationSampling::kCentroid: |
| out << "centroid "; |
| break; |
| case core::InterpolationSampling::kSample: |
| case core::InterpolationSampling::kCenter: |
| case core::InterpolationSampling::kFirst: |
| case core::InterpolationSampling::kEither: |
| case core::InterpolationSampling::kUndefined: |
| break; |
| } |
| } |
| } |
| } |
| |
| void ASTPrinter::EmitAttributes(StringStream& out, const sem::GlobalVariable* var) { |
| auto& attrs = var->Attributes(); |
| |
| bool first = true; |
| if (attrs.location.has_value()) { |
| out << (first ? "layout(" : ", "); |
| out << "location = " << std::to_string(attrs.location.value()); |
| first = false; |
| } |
| if (attrs.blend_src.has_value()) { |
| out << ", index = " << std::to_string(attrs.blend_src.value()); |
| } |
| if (!first) { |
| out << ") "; |
| } |
| } |
| |
| void ASTPrinter::EmitEntryPointFunction(const ast::Function* func) { |
| auto* func_sem = builder_.Sem().Get(func); |
| |
| if (func->PipelineStage() == ast::PipelineStage::kFragment) { |
| requires_default_precision_qualifier_ = true; |
| } |
| |
| if (func->PipelineStage() == ast::PipelineStage::kCompute) { |
| auto out = Line(); |
| // Emit the layout(local_size) attributes. |
| auto wgsize = func_sem->WorkgroupSize(); |
| out << "layout("; |
| for (size_t i = 0; i < 3; i++) { |
| if (i > 0) { |
| out << ", "; |
| } |
| out << "local_size_" << (i == 0 ? "x" : i == 1 ? "y" : "z") << " = "; |
| |
| if (!wgsize[i].has_value()) { |
| diagnostics_.AddError(Source{}) |
| << "override-expressions should have been removed with the SubstituteOverride " |
| "transform"; |
| return; |
| } |
| out << std::to_string(wgsize[i].value()); |
| } |
| out << ") in;"; |
| } |
| |
| // Emit original entry point signature |
| { |
| auto out = Line(); |
| EmitTypeAndName(out, func_sem->ReturnType(), core::AddressSpace::kUndefined, |
| core::Access::kUndefined, func->name->symbol.Name()); |
| out << "("; |
| |
| bool first = true; |
| |
| // Emit entry point parameters. |
| for (auto* var : func->params) { |
| auto* sem = builder_.Sem().Get(var); |
| auto* type = sem->Type(); |
| if (DAWN_UNLIKELY(!type->Is<core::type::Struct>())) { |
| // ICE likely indicates that the CanonicalizeEntryPointIO transform was |
| // not run, or a builtin parameter was added after it was run. |
| TINT_ICE() << "Unsupported non-struct entry point parameter"; |
| } |
| |
| if (!first) { |
| out << ", "; |
| } |
| first = false; |
| |
| EmitTypeAndName(out, type, sem->AddressSpace(), sem->Access(), |
| var->name->symbol.Name()); |
| } |
| |
| out << ") {"; |
| } |
| |
| // Emit original entry point function body |
| { |
| ScopedIndent si(this); |
| if (func->PipelineStage() == ast::PipelineStage::kVertex) { |
| Line() << "gl_PointSize = 1.0;"; |
| } |
| |
| EmitStatements(func->body->statements); |
| |
| if (!Is<ast::ReturnStatement>(func->body->Last())) { |
| ast::ReturnStatement ret(GenerationID{}, ast::NodeID{}, Source{}); |
| EmitStatement(&ret); |
| } |
| } |
| |
| Line() << "}"; |
| } |
| |
| void ASTPrinter::EmitConstant(StringStream& out, const core::constant::Value* constant) { |
| Switch( |
| constant->Type(), // |
| [&](const core::type::Bool*) { out << (constant->ValueAs<AInt>() ? "true" : "false"); }, |
| [&](const core::type::F32*) { PrintF32(out, constant->ValueAs<f32>()); }, |
| [&](const core::type::F16*) { PrintF16(out, constant->ValueAs<f16>()); }, |
| [&](const core::type::I32*) { PrintI32(out, constant->ValueAs<i32>()); }, |
| [&](const core::type::U32*) { out << constant->ValueAs<AInt>() << "u"; }, |
| [&](const core::type::Vector* v) { |
| EmitType(out, v, core::AddressSpace::kUndefined, core::Access::kUndefined, ""); |
| |
| ScopedParen sp(out); |
| |
| if (auto* splat = constant->As<core::constant::Splat>()) { |
| EmitConstant(out, splat->el); |
| return; |
| } |
| |
| for (size_t i = 0; i < v->Width(); i++) { |
| if (i > 0) { |
| out << ", "; |
| } |
| EmitConstant(out, constant->Index(i)); |
| } |
| }, |
| [&](const core::type::Matrix* m) { |
| EmitType(out, m, core::AddressSpace::kUndefined, core::Access::kUndefined, ""); |
| |
| ScopedParen sp(out); |
| |
| for (size_t column_idx = 0; column_idx < m->Columns(); column_idx++) { |
| if (column_idx > 0) { |
| out << ", "; |
| } |
| EmitConstant(out, constant->Index(column_idx)); |
| } |
| }, |
| [&](const core::type::Array* a) { |
| EmitType(out, a, core::AddressSpace::kUndefined, core::Access::kUndefined, ""); |
| |
| ScopedParen sp(out); |
| |
| auto count = a->ConstantCount(); |
| if (!count) { |
| diagnostics_.AddError(Source{}) << core::type::Array::kErrExpectedConstantCount; |
| return; |
| } |
| |
| for (size_t i = 0; i < count; i++) { |
| if (i > 0) { |
| out << ", "; |
| } |
| EmitConstant(out, constant->Index(i)); |
| } |
| }, |
| [&](const core::type::Struct* s) { |
| EmitStructType(&helpers_, s); |
| |
| out << StructName(s); |
| |
| ScopedParen sp(out); |
| |
| for (size_t i = 0; i < s->Members().Length(); i++) { |
| if (i > 0) { |
| out << ", "; |
| } |
| EmitConstant(out, constant->Index(i)); |
| } |
| }, // |
| TINT_ICE_ON_NO_MATCH); |
| } |
| |
| void ASTPrinter::EmitLiteral(StringStream& out, const ast::LiteralExpression* lit) { |
| Switch( |
| lit, // |
| [&](const ast::BoolLiteralExpression* l) { out << (l->value ? "true" : "false"); }, |
| [&](const ast::FloatLiteralExpression* l) { |
| if (l->suffix == ast::FloatLiteralExpression::Suffix::kH) { |
| PrintF16(out, static_cast<float>(l->value)); |
| } else { |
| PrintF32(out, static_cast<float>(l->value)); |
| } |
| }, |
| [&](const ast::IntLiteralExpression* i) { |
| switch (i->suffix) { |
| case ast::IntLiteralExpression::Suffix::kNone: |
| case ast::IntLiteralExpression::Suffix::kI: { |
| PrintI32(out, static_cast<int32_t>(i->value)); |
| return; |
| } |
| case ast::IntLiteralExpression::Suffix::kU: { |
| out << i->value << "u"; |
| return; |
| } |
| } |
| diagnostics_.AddError(Source{}) << "unknown integer literal suffix type"; |
| }, // |
| TINT_ICE_ON_NO_MATCH); |
| } |
| |
| void ASTPrinter::EmitZeroValue(StringStream& out, const core::type::Type* type) { |
| if (type->Is<core::type::Bool>()) { |
| out << "false"; |
| } else if (type->Is<core::type::F32>()) { |
| out << "0.0f"; |
| } else if (type->Is<core::type::F16>()) { |
| out << "0.0hf"; |
| } else if (type->Is<core::type::I32>()) { |
| out << "0"; |
| } else if (type->Is<core::type::U32>()) { |
| out << "0u"; |
| } else if (auto* vec = type->As<core::type::Vector>()) { |
| EmitType(out, type, core::AddressSpace::kUndefined, core::Access::kReadWrite, ""); |
| ScopedParen sp(out); |
| for (uint32_t i = 0; i < vec->Width(); i++) { |
| if (i != 0) { |
| out << ", "; |
| } |
| EmitZeroValue(out, vec->Type()); |
| } |
| } else if (auto* mat = type->As<core::type::Matrix>()) { |
| EmitType(out, type, core::AddressSpace::kUndefined, core::Access::kReadWrite, ""); |
| ScopedParen sp(out); |
| for (uint32_t i = 0; i < (mat->Rows() * mat->Columns()); i++) { |
| if (i != 0) { |
| out << ", "; |
| } |
| EmitZeroValue(out, mat->Type()); |
| } |
| } else if (auto* str = type->As<core::type::Struct>()) { |
| EmitType(out, type, core::AddressSpace::kUndefined, core::Access::kUndefined, ""); |
| bool first = true; |
| ScopedParen sp(out); |
| for (auto* member : str->Members()) { |
| if (!first) { |
| out << ", "; |
| } else { |
| first = false; |
| } |
| EmitZeroValue(out, member->Type()); |
| } |
| } else if (auto* arr = type->As<core::type::Array>()) { |
| EmitType(out, type, core::AddressSpace::kUndefined, core::Access::kUndefined, ""); |
| ScopedParen sp(out); |
| |
| auto count = arr->ConstantCount(); |
| if (!count) { |
| diagnostics_.AddError(Source{}) << core::type::Array::kErrExpectedConstantCount; |
| return; |
| } |
| |
| for (uint32_t i = 0; i < count; i++) { |
| if (i != 0) { |
| out << ", "; |
| } |
| EmitZeroValue(out, arr->ElemType()); |
| } |
| } else { |
| diagnostics_.AddError(Source{}) |
| << "Invalid type for zero emission: " << type->FriendlyName(); |
| } |
| } |
| |
| void ASTPrinter::EmitLoop(const ast::LoopStatement* stmt) { |
| auto emit_continuing = [this, stmt] { |
| if (stmt->continuing && !stmt->continuing->Empty()) { |
| EmitBlock(stmt->continuing); |
| } |
| }; |
| |
| TINT_SCOPED_ASSIGNMENT(emit_continuing_, emit_continuing); |
| Line() << "while (true) {"; |
| { |
| ScopedIndent si(this); |
| EmitStatements(stmt->body->statements); |
| emit_continuing_(); |
| } |
| Line() << "}"; |
| } |
| |
| void ASTPrinter::EmitForLoop(const ast::ForLoopStatement* stmt) { |
| // Nest a for loop with a new block. In HLSL the initializer scope is not |
| // nested by the for-loop, so we may get variable redefinitions. |
| Line() << "{"; |
| IncrementIndent(); |
| TINT_DEFER({ |
| DecrementIndent(); |
| Line() << "}"; |
| }); |
| |
| TextBuffer init_buf; |
| if (auto* init = stmt->initializer) { |
| TINT_SCOPED_ASSIGNMENT(current_buffer_, &init_buf); |
| EmitStatement(init); |
| } |
| |
| TextBuffer cond_pre; |
| StringStream cond_buf; |
| if (auto* cond = stmt->condition) { |
| TINT_SCOPED_ASSIGNMENT(current_buffer_, &cond_pre); |
| EmitExpression(cond_buf, cond); |
| } |
| |
| TextBuffer cont_buf; |
| if (auto* cont = stmt->continuing) { |
| TINT_SCOPED_ASSIGNMENT(current_buffer_, &cont_buf); |
| EmitStatement(cont); |
| } |
| |
| // If the for-loop has a multi-statement conditional and / or continuing, then |
| // we cannot emit this as a regular for-loop in HLSL. Instead we need to |
| // generate a `while(true)` loop. |
| bool emit_as_loop = cond_pre.lines.size() > 0 || cont_buf.lines.size() > 1; |
| |
| // If the for-loop has multi-statement initializer, or is going to be emitted |
| // as a `while(true)` loop, then declare the initializer statement(s) before |
| // the loop. |
| if (init_buf.lines.size() > 1 || (stmt->initializer && emit_as_loop)) { |
| current_buffer_->Append(init_buf); |
| init_buf.lines.clear(); // Don't emit the initializer again in the 'for' |
| } |
| |
| if (emit_as_loop) { |
| auto emit_continuing = [&] { current_buffer_->Append(cont_buf); }; |
| |
| TINT_SCOPED_ASSIGNMENT(emit_continuing_, emit_continuing); |
| Line() << "while (true) {"; |
| IncrementIndent(); |
| TINT_DEFER({ |
| DecrementIndent(); |
| Line() << "}"; |
| }); |
| |
| if (stmt->condition) { |
| current_buffer_->Append(cond_pre); |
| Line() << "if (!(" << cond_buf.str() << ")) { break; }"; |
| } |
| |
| EmitStatements(stmt->body->statements); |
| emit_continuing_(); |
| } else { |
| // For-loop can be generated. |
| { |
| auto out = Line(); |
| out << "for"; |
| { |
| ScopedParen sp(out); |
| |
| if (!init_buf.lines.empty()) { |
| out << init_buf.lines[0].content << " "; |
| } else { |
| out << "; "; |
| } |
| |
| out << cond_buf.str() << "; "; |
| |
| if (!cont_buf.lines.empty()) { |
| out << tint::TrimSuffix(cont_buf.lines[0].content, ";"); |
| } |
| } |
| out << " {"; |
| } |
| { |
| auto emit_continuing = [] { return true; }; |
| TINT_SCOPED_ASSIGNMENT(emit_continuing_, emit_continuing); |
| EmitStatementsWithIndent(stmt->body->statements); |
| } |
| Line() << "}"; |
| } |
| } |
| |
| void ASTPrinter::EmitWhile(const ast::WhileStatement* stmt) { |
| TextBuffer cond_pre; |
| StringStream cond_buf; |
| { |
| auto* cond = stmt->condition; |
| TINT_SCOPED_ASSIGNMENT(current_buffer_, &cond_pre); |
| EmitExpression(cond_buf, cond); |
| } |
| |
| auto emit_continuing = [&] {}; |
| TINT_SCOPED_ASSIGNMENT(emit_continuing_, emit_continuing); |
| |
| // If the whilehas a multi-statement conditional, then we cannot emit this |
| // as a regular while in GLSL. Instead we need to generate a `while(true)` loop. |
| bool emit_as_loop = cond_pre.lines.size() > 0; |
| if (emit_as_loop) { |
| Line() << "while (true) {"; |
| IncrementIndent(); |
| TINT_DEFER({ |
| DecrementIndent(); |
| Line() << "}"; |
| }); |
| |
| current_buffer_->Append(cond_pre); |
| Line() << "if (!(" << cond_buf.str() << ")) { break; }"; |
| |
| EmitStatements(stmt->body->statements); |
| } else { |
| // While can be generated. |
| { |
| auto out = Line(); |
| out << "while"; |
| { |
| ScopedParen sp(out); |
| out << cond_buf.str(); |
| } |
| out << " {"; |
| } |
| EmitStatementsWithIndent(stmt->body->statements); |
| Line() << "}"; |
| } |
| } |
| |
| void ASTPrinter::EmitMemberAccessor(StringStream& out, const ast::MemberAccessorExpression* expr) { |
| EmitExpression(out, expr->object); |
| out << "."; |
| |
| auto* sem = builder_.Sem().Get(expr)->UnwrapLoad(); |
| |
| Switch( |
| sem, |
| [&](const sem::Swizzle*) { |
| // Swizzles output the name directly |
| out << expr->member->symbol.Name(); |
| }, |
| [&](const sem::StructMemberAccess* member_access) { |
| out << member_access->Member()->Name().Name(); |
| }, // |
| TINT_ICE_ON_NO_MATCH); |
| } |
| |
| void ASTPrinter::EmitReturn(const ast::ReturnStatement* stmt) { |
| if (stmt->value) { |
| auto out = Line(); |
| out << "return "; |
| EmitExpression(out, stmt->value); |
| out << ";"; |
| } else { |
| Line() << "return;"; |
| } |
| } |
| |
| void ASTPrinter::EmitStatement(const ast::Statement* stmt) { |
| Switch( |
| stmt, // |
| [&](const ast::AssignmentStatement* a) { EmitAssign(a); }, |
| [&](const ast::BlockStatement* b) { EmitBlock(b); }, |
| [&](const ast::BreakStatement* b) { EmitBreak(b); }, |
| [&](const ast::BreakIfStatement* b) { EmitBreakIf(b); }, |
| [&](const ast::CallStatement* c) { |
| auto out = Line(); |
| EmitCall(out, c->expr); |
| out << ";"; |
| }, |
| [&](const ast::ContinueStatement* c) { EmitContinue(c); }, |
| [&](const ast::DiscardStatement* d) { EmitDiscard(d); }, |
| [&](const ast::IfStatement* i) { EmitIf(i); }, |
| [&](const ast::LoopStatement* l) { EmitLoop(l); }, |
| [&](const ast::ForLoopStatement* l) { EmitForLoop(l); }, |
| [&](const ast::WhileStatement* l) { EmitWhile(l); }, |
| [&](const ast::ReturnStatement* r) { EmitReturn(r); }, |
| [&](const ast::SwitchStatement* s) { EmitSwitch(s); }, |
| [&](const ast::VariableDeclStatement* v) { |
| Switch( |
| v->variable, // |
| [&](const ast::Var* var) { EmitVar(var); }, |
| [&](const ast::Let* let) { EmitLet(let); }, |
| [&](const ast::Const*) { |
| // Constants are embedded at their use |
| }, // |
| TINT_ICE_ON_NO_MATCH); |
| }, |
| [&](const ast::ConstAssert*) { |
| // Not emitted |
| }, // |
| TINT_ICE_ON_NO_MATCH); |
| } |
| |
| void ASTPrinter::EmitSwitch(const ast::SwitchStatement* stmt) { |
| { // switch(expr) { |
| auto out = Line(); |
| out << "switch("; |
| EmitExpression(out, stmt->condition); |
| out << ") {"; |
| } |
| |
| { |
| ScopedIndent si(this); |
| for (auto* s : stmt->body) { |
| EmitCase(s); |
| } |
| } |
| |
| Line() << "}"; |
| } |
| |
| void ASTPrinter::EmitType(StringStream& out, |
| const core::type::Type* type, |
| core::AddressSpace address_space, |
| core::Access access, |
| const std::string& name, |
| bool* name_printed /* = nullptr */) { |
| if (name_printed) { |
| *name_printed = false; |
| } |
| switch (address_space) { |
| case core::AddressSpace::kIn: { |
| out << "in "; |
| break; |
| } |
| case core::AddressSpace::kOut: { |
| out << "out "; |
| break; |
| } |
| case core::AddressSpace::kUniform: |
| case core::AddressSpace::kPushConstant: |
| case core::AddressSpace::kHandle: { |
| out << "uniform "; |
| break; |
| } |
| default: |
| break; |
| } |
| |
| if (auto* ary = type->As<core::type::Array>()) { |
| const core::type::Type* base_type = ary; |
| std::vector<uint32_t> sizes; |
| while (auto* arr = base_type->As<core::type::Array>()) { |
| if (arr->Count()->Is<core::type::RuntimeArrayCount>()) { |
| sizes.push_back(0); |
| } else { |
| auto count = arr->ConstantCount(); |
| if (!count) { |
| diagnostics_.AddError(Source{}) << core::type::Array::kErrExpectedConstantCount; |
| return; |
| } |
| sizes.push_back(count.value()); |
| } |
| |
| base_type = arr->ElemType(); |
| } |
| EmitType(out, base_type, address_space, access, ""); |
| if (!name.empty()) { |
| out << " " << name; |
| if (name_printed) { |
| *name_printed = true; |
| } |
| } |
| for (uint32_t size : sizes) { |
| if (size > 0) { |
| out << "[" << size << "]"; |
| } else { |
| out << "[]"; |
| } |
| } |
| } else if (type->Is<core::type::Bool>()) { |
| out << "bool"; |
| } else if (type->Is<core::type::F32>()) { |
| out << "float"; |
| } else if (type->Is<core::type::F16>()) { |
| out << "float16_t"; |
| } else if (type->Is<core::type::I32>()) { |
| out << "int"; |
| } else if (auto* mat = type->As<core::type::Matrix>()) { |
| TINT_ASSERT((mat->Type()->IsAnyOf<core::type::F32, core::type::F16>())); |
| if (mat->Type()->Is<core::type::F16>()) { |
| out << "f16"; |
| } |
| out << "mat" << mat->Columns(); |
| if (mat->Rows() != mat->Columns()) { |
| out << "x" << mat->Rows(); |
| } |
| } else if (DAWN_UNLIKELY(type->Is<core::type::Pointer>())) { |
| TINT_ICE() << "Attempting to emit pointer type. These should have been removed with the " |
| "SimplifyPointers transform"; |
| } else if (type->Is<core::type::Sampler>()) { |
| } else if (auto* str = type->As<core::type::Struct>()) { |
| out << StructName(str); |
| } else if (auto* tex = type->As<core::type::Texture>()) { |
| if (DAWN_UNLIKELY(tex->Is<core::type::ExternalTexture>())) { |
| TINT_ICE() << "Multiplanar external texture transform was not run."; |
| } |
| |
| auto* storage = tex->As<core::type::StorageTexture>(); |
| auto* ms = tex->As<core::type::MultisampledTexture>(); |
| auto* depth_ms = tex->As<core::type::DepthMultisampledTexture>(); |
| auto* sampled = tex->As<core::type::SampledTexture>(); |
| |
| out << "highp "; |
| |
| if (storage) { |
| switch (storage->Access()) { |
| case core::Access::kRead: |
| out << "readonly "; |
| break; |
| case core::Access::kWrite: |
| out << "writeonly "; |
| break; |
| case core::Access::kReadWrite: { |
| if (version_.IsES()) { |
| // ESSL 3.1 SPEC (chapter 4.9, Memory Access Qualifiers): |
| // Except for image variables qualified with the format qualifiers r32f, |
| // r32i, and r32ui, image variables must specify either memory qualifier |
| // readonly or the memory qualifier writeonly. |
| switch (storage->TexelFormat()) { |
| case core::TexelFormat::kR32Float: |
| case core::TexelFormat::kR32Sint: |
| case core::TexelFormat::kR32Uint: |
| break; |
| default: { |
| // TODO(dawn:1972): Fix the tests that contain read-write storage |
| // textures with illegal formats. |
| out << "writeonly "; |
| break; |
| } |
| } |
| } |
| break; |
| } |
| default: |
| TINT_UNREACHABLE() << "unexpected storage texture access " << storage->Access(); |
| } |
| } |
| auto* subtype = sampled ? sampled->Type() |
| : storage ? storage->Type() |
| : ms ? ms->Type() |
| : nullptr; |
| if (!subtype || subtype->Is<core::type::F32>()) { |
| } else if (subtype->Is<core::type::I32>()) { |
| out << "i"; |
| } else if (DAWN_LIKELY(subtype->Is<core::type::U32>())) { |
| out << "u"; |
| } else { |
| TINT_ICE() << "Unsupported texture type"; |
| } |
| |
| out << (storage ? "image" : "sampler"); |
| |
| switch (tex->Dim()) { |
| case core::type::TextureDimension::k1d: |
| out << "1D"; |
| break; |
| case core::type::TextureDimension::k2d: |
| out << ((ms || depth_ms) ? "2DMS" : "2D"); |
| break; |
| case core::type::TextureDimension::k2dArray: |
| out << ((ms || depth_ms) ? "2DMSArray" : "2DArray"); |
| break; |
| case core::type::TextureDimension::k3d: |
| out << "3D"; |
| break; |
| case core::type::TextureDimension::kCube: |
| out << "Cube"; |
| break; |
| case core::type::TextureDimension::kCubeArray: |
| out << "CubeArray"; |
| break; |
| default: |
| TINT_UNREACHABLE() << "unexpected TextureDimension " << tex->Dim(); |
| } |
| if (tex->Is<core::type::DepthTexture>()) { |
| out << "Shadow"; |
| } |
| } else if (type->Is<core::type::U32>()) { |
| out << "uint"; |
| } else if (auto* vec = type->As<core::type::Vector>()) { |
| auto width = vec->Width(); |
| if (vec->Type()->Is<core::type::F32>() && width >= 1 && width <= 4) { |
| out << "vec" << width; |
| } else if (vec->Type()->Is<core::type::F16>() && width >= 1 && width <= 4) { |
| out << "f16vec" << width; |
| } else if (vec->Type()->Is<core::type::I32>() && width >= 1 && width <= 4) { |
| out << "ivec" << width; |
| } else if (vec->Type()->Is<core::type::U32>() && width >= 1 && width <= 4) { |
| out << "uvec" << width; |
| } else if (vec->Type()->Is<core::type::Bool>() && width >= 1 && width <= 4) { |
| out << "bvec" << width; |
| } else { |
| out << "vector<"; |
| EmitType(out, vec->Type(), address_space, access, ""); |
| out << ", " << width << ">"; |
| } |
| } else if (auto* atomic = type->As<core::type::Atomic>()) { |
| EmitType(out, atomic->Type(), address_space, access, name); |
| } else if (type->Is<core::type::Void>()) { |
| out << "void"; |
| } else { |
| diagnostics_.AddError(Source{}) << "unknown type in EmitType"; |
| } |
| } |
| |
| void ASTPrinter::EmitTypeAndName(StringStream& out, |
| const core::type::Type* type, |
| core::AddressSpace address_space, |
| core::Access access, |
| const std::string& name) { |
| bool printed_name = false; |
| EmitType(out, type, address_space, access, name, &printed_name); |
| if (!name.empty() && !printed_name) { |
| out << " " << name; |
| } |
| } |
| |
| void ASTPrinter::EmitStructType(TextBuffer* b, const core::type::Struct* str) { |
| auto it = emitted_structs_.emplace(str); |
| if (!it.second) { |
| return; |
| } |
| |
| auto address_space_uses = str->AddressSpaceUsage(); |
| Line(b) << "struct " << StructName(str) << " {"; |
| EmitStructMembers(b, str); |
| Line(b) << "};"; |
| Line(b); |
| } |
| |
| void ASTPrinter::EmitStructMembers(TextBuffer* b, const core::type::Struct* str) { |
| ScopedIndent si(b); |
| for (auto* mem : str->Members()) { |
| auto name = mem->Name().Name(); |
| auto* ty = mem->Type(); |
| |
| auto out = Line(b); |
| EmitTypeAndName(out, ty, core::AddressSpace::kUndefined, core::Access::kReadWrite, name); |
| out << ";"; |
| } |
| } |
| |
| void ASTPrinter::EmitUnaryOp(StringStream& out, const ast::UnaryOpExpression* expr) { |
| switch (expr->op) { |
| case core::UnaryOp::kIndirection: |
| case core::UnaryOp::kAddressOf: |
| EmitExpression(out, expr->expr); |
| return; |
| case core::UnaryOp::kComplement: |
| out << "~"; |
| break; |
| case core::UnaryOp::kNot: |
| if (TypeOf(expr)->UnwrapRef()->Is<core::type::Scalar>()) { |
| out << "!"; |
| } else { |
| out << "not"; |
| } |
| break; |
| case core::UnaryOp::kNegation: |
| out << "-"; |
| break; |
| } |
| |
| ScopedParen sp(out); |
| EmitExpression(out, expr->expr); |
| } |
| |
| void ASTPrinter::EmitVar(const ast::Var* var) { |
| auto* sem = builder_.Sem().Get(var); |
| auto* type = sem->Type()->UnwrapRef(); |
| |
| auto out = Line(); |
| EmitTypeAndName(out, type, sem->AddressSpace(), sem->Access(), var->name->symbol.Name()); |
| |
| out << " = "; |
| |
| if (var->initializer) { |
| EmitExpression(out, var->initializer); |
| } else { |
| EmitZeroValue(out, type); |
| } |
| out << ";"; |
| } |
| |
| void ASTPrinter::EmitLet(const ast::Let* let) { |
| auto* sem = builder_.Sem().Get(let); |
| auto* type = sem->Type()->UnwrapRef(); |
| |
| auto out = Line(); |
| // TODO(senorblanco): handle const |
| EmitTypeAndName(out, type, core::AddressSpace::kUndefined, core::Access::kUndefined, |
| let->name->symbol.Name()); |
| |
| out << " = "; |
| EmitExpression(out, let->initializer); |
| out << ";"; |
| } |
| |
| void ASTPrinter::EmitProgramConstVariable(const ast::Variable* var) { |
| auto* sem = builder_.Sem().Get(var); |
| auto* type = sem->Type(); |
| |
| auto out = Line(); |
| out << "const "; |
| EmitTypeAndName(out, type, core::AddressSpace::kUndefined, core::Access::kUndefined, |
| var->name->symbol.Name()); |
| out << " = "; |
| EmitExpression(out, var->initializer); |
| out << ";"; |
| } |
| |
| template <typename F> |
| void ASTPrinter::CallBuiltinHelper(StringStream& out, |
| const ast::CallExpression* call, |
| const sem::BuiltinFn* builtin, |
| F&& build) { |
| // Generate the helper function if it hasn't been created already |
| auto fn = tint::GetOrAdd(builtins_, builtin, [&]() -> std::string { |
| TextBuffer b; |
| TINT_DEFER(helpers_.Append(b)); |
| |
| auto fn_name = UniqueIdentifier(std::string("tint_") + wgsl::str(builtin->Fn())); |
| std::vector<std::string> parameter_names; |
| { |
| auto decl = Line(&b); |
| EmitTypeAndName(decl, builtin->ReturnType(), core::AddressSpace::kUndefined, |
| core::Access::kUndefined, fn_name); |
| { |
| ScopedParen sp(decl); |
| for (auto* param : builtin->Parameters()) { |
| if (!parameter_names.empty()) { |
| decl << ", "; |
| } |
| auto param_name = "param_" + std::to_string(parameter_names.size()); |
| const auto* ty = param->Type(); |
| if (auto* ptr = ty->As<core::type::Pointer>()) { |
| decl << "inout "; |
| ty = ptr->StoreType(); |
| } |
| EmitTypeAndName(decl, ty, core::AddressSpace::kUndefined, |
| core::Access::kUndefined, param_name); |
| parameter_names.emplace_back(std::move(param_name)); |
| } |
| } |
| decl << " {"; |
| } |
| { |
| ScopedIndent si(&b); |
| build(&b, parameter_names); |
| } |
| Line(&b) << "}"; |
| Line(&b); |
| return fn_name; |
| }); |
| |
| // Call the helper |
| out << fn; |
| { |
| ScopedParen sp(out); |
| bool first = true; |
| for (auto* arg : call->args) { |
| if (!first) { |
| out << ", "; |
| } |
| first = false; |
| EmitExpression(out, arg); |
| } |
| } |
| } |
| |
| core::type::Type* ASTPrinter::BoolTypeToUint(const core::type::Type* type) { |
| auto* u32 = builder_.create<core::type::U32>(); |
| if (type->Is<core::type::Bool>()) { |
| return u32; |
| } else if (auto* vec = type->As<core::type::Vector>()) { |
| return builder_.create<core::type::Vector>(u32, vec->Width()); |
| } else { |
| return nullptr; |
| } |
| } |
| |
| std::string ASTPrinter::StructName(const core::type::Struct* s) { |
| auto name = s->Name().Name(); |
| if (HasPrefix(name, "__")) { |
| name = tint::GetOrAdd(builtin_struct_names_, s, |
| [&] { return UniqueIdentifier(name.substr(2)); }); |
| } |
| return name; |
| } |
| |
| std::string ASTPrinter::UniqueIdentifier(const std::string& prefix /* = "" */) { |
| return builder_.Symbols().New(prefix).Name(); |
| } |
| |
| } // namespace tint::glsl::writer |