blob: c3a691e56a66037e2b86c9eb1b9a93e04728eb64 [file] [log] [blame]
// Copyright 2017 The Dawn Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "dawn_native/d3d12/BufferD3D12.h"
#include "common/Assert.h"
#include "common/Constants.h"
#include "common/Math.h"
#include "dawn_native/CommandBuffer.h"
#include "dawn_native/DynamicUploader.h"
#include "dawn_native/d3d12/CommandRecordingContext.h"
#include "dawn_native/d3d12/D3D12Error.h"
#include "dawn_native/d3d12/DeviceD3D12.h"
#include "dawn_native/d3d12/HeapD3D12.h"
#include "dawn_native/d3d12/ResidencyManagerD3D12.h"
#include "dawn_native/d3d12/UtilsD3D12.h"
namespace dawn::native::d3d12 {
namespace {
D3D12_RESOURCE_FLAGS D3D12ResourceFlags(wgpu::BufferUsage usage) {
D3D12_RESOURCE_FLAGS flags = D3D12_RESOURCE_FLAG_NONE;
if (usage & (wgpu::BufferUsage::Storage | kInternalStorageBuffer)) {
flags |= D3D12_RESOURCE_FLAG_ALLOW_UNORDERED_ACCESS;
}
return flags;
}
D3D12_RESOURCE_STATES D3D12BufferUsage(wgpu::BufferUsage usage) {
D3D12_RESOURCE_STATES resourceState = D3D12_RESOURCE_STATE_COMMON;
if (usage & wgpu::BufferUsage::CopySrc) {
resourceState |= D3D12_RESOURCE_STATE_COPY_SOURCE;
}
if (usage & wgpu::BufferUsage::CopyDst) {
resourceState |= D3D12_RESOURCE_STATE_COPY_DEST;
}
if (usage & (wgpu::BufferUsage::Vertex | wgpu::BufferUsage::Uniform)) {
resourceState |= D3D12_RESOURCE_STATE_VERTEX_AND_CONSTANT_BUFFER;
}
if (usage & wgpu::BufferUsage::Index) {
resourceState |= D3D12_RESOURCE_STATE_INDEX_BUFFER;
}
if (usage & (wgpu::BufferUsage::Storage | kInternalStorageBuffer)) {
resourceState |= D3D12_RESOURCE_STATE_UNORDERED_ACCESS;
}
if (usage & kReadOnlyStorageBuffer) {
resourceState |= (D3D12_RESOURCE_STATE_PIXEL_SHADER_RESOURCE |
D3D12_RESOURCE_STATE_NON_PIXEL_SHADER_RESOURCE);
}
if (usage & wgpu::BufferUsage::Indirect) {
resourceState |= D3D12_RESOURCE_STATE_INDIRECT_ARGUMENT;
}
if (usage & wgpu::BufferUsage::QueryResolve) {
resourceState |= D3D12_RESOURCE_STATE_COPY_DEST;
}
return resourceState;
}
D3D12_HEAP_TYPE D3D12HeapType(wgpu::BufferUsage allowedUsage) {
if (allowedUsage & wgpu::BufferUsage::MapRead) {
return D3D12_HEAP_TYPE_READBACK;
} else if (allowedUsage & wgpu::BufferUsage::MapWrite) {
return D3D12_HEAP_TYPE_UPLOAD;
} else {
return D3D12_HEAP_TYPE_DEFAULT;
}
}
size_t D3D12BufferSizeAlignment(wgpu::BufferUsage usage) {
if ((usage & wgpu::BufferUsage::Uniform) != 0) {
// D3D buffers are always resource size aligned to 64KB. However, D3D12's validation
// forbids binding a CBV to an unaligned size. To prevent, one can always safely
// align the buffer size to the CBV data alignment as other buffer usages
// ignore it (no size check). The validation will still enforce bound checks with
// the unaligned size returned by GetSize().
// https://docs.microsoft.com/en-us/windows/win32/direct3d12/uploading-resources#buffer-alignment
return D3D12_CONSTANT_BUFFER_DATA_PLACEMENT_ALIGNMENT;
}
return 1;
}
} // namespace
// static
ResultOrError<Ref<Buffer>> Buffer::Create(Device* device, const BufferDescriptor* descriptor) {
Ref<Buffer> buffer = AcquireRef(new Buffer(device, descriptor));
DAWN_TRY(buffer->Initialize(descriptor->mappedAtCreation));
return buffer;
}
Buffer::Buffer(Device* device, const BufferDescriptor* descriptor)
: BufferBase(device, descriptor) {
}
MaybeError Buffer::Initialize(bool mappedAtCreation) {
// Allocate at least 4 bytes so clamped accesses are always in bounds.
uint64_t size = std::max(GetSize(), uint64_t(4u));
size_t alignment = D3D12BufferSizeAlignment(GetUsage());
if (size > std::numeric_limits<uint64_t>::max() - alignment) {
// Alignment would overlow.
return DAWN_OUT_OF_MEMORY_ERROR("Buffer allocation is too large");
}
mAllocatedSize = Align(size, alignment);
D3D12_RESOURCE_DESC resourceDescriptor;
resourceDescriptor.Dimension = D3D12_RESOURCE_DIMENSION_BUFFER;
resourceDescriptor.Alignment = 0;
resourceDescriptor.Width = mAllocatedSize;
resourceDescriptor.Height = 1;
resourceDescriptor.DepthOrArraySize = 1;
resourceDescriptor.MipLevels = 1;
resourceDescriptor.Format = DXGI_FORMAT_UNKNOWN;
resourceDescriptor.SampleDesc.Count = 1;
resourceDescriptor.SampleDesc.Quality = 0;
resourceDescriptor.Layout = D3D12_TEXTURE_LAYOUT_ROW_MAJOR;
// Add CopyDst for non-mappable buffer initialization with mappedAtCreation
// and robust resource initialization.
resourceDescriptor.Flags = D3D12ResourceFlags(GetUsage() | wgpu::BufferUsage::CopyDst);
auto heapType = D3D12HeapType(GetUsage());
auto bufferUsage = D3D12_RESOURCE_STATE_COMMON;
// D3D12 requires buffers on the READBACK heap to have the D3D12_RESOURCE_STATE_COPY_DEST
// state
if (heapType == D3D12_HEAP_TYPE_READBACK) {
bufferUsage |= D3D12_RESOURCE_STATE_COPY_DEST;
mFixedResourceState = true;
mLastUsage = wgpu::BufferUsage::CopyDst;
}
// D3D12 requires buffers on the UPLOAD heap to have the D3D12_RESOURCE_STATE_GENERIC_READ
// state
if (heapType == D3D12_HEAP_TYPE_UPLOAD) {
bufferUsage |= D3D12_RESOURCE_STATE_GENERIC_READ;
mFixedResourceState = true;
mLastUsage = wgpu::BufferUsage::CopySrc;
}
DAWN_TRY_ASSIGN(
mResourceAllocation,
ToBackend(GetDevice())->AllocateMemory(heapType, resourceDescriptor, bufferUsage));
SetLabelImpl();
// The buffers with mappedAtCreation == true will be initialized in
// BufferBase::MapAtCreation().
if (GetDevice()->IsToggleEnabled(Toggle::NonzeroClearResourcesOnCreationForTesting) &&
!mappedAtCreation) {
CommandRecordingContext* commandRecordingContext;
DAWN_TRY_ASSIGN(commandRecordingContext,
ToBackend(GetDevice())->GetPendingCommandContext());
DAWN_TRY(ClearBuffer(commandRecordingContext, uint8_t(1u)));
}
// Initialize the padding bytes to zero.
if (GetDevice()->IsToggleEnabled(Toggle::LazyClearResourceOnFirstUse) &&
!mappedAtCreation) {
uint32_t paddingBytes = GetAllocatedSize() - GetSize();
if (paddingBytes > 0) {
CommandRecordingContext* commandRecordingContext;
DAWN_TRY_ASSIGN(commandRecordingContext,
ToBackend(GetDevice())->GetPendingCommandContext());
uint32_t clearSize = paddingBytes;
uint64_t clearOffset = GetSize();
DAWN_TRY(ClearBuffer(commandRecordingContext, 0, clearOffset, clearSize));
}
}
return {};
}
Buffer::~Buffer() = default;
ID3D12Resource* Buffer::GetD3D12Resource() const {
return mResourceAllocation.GetD3D12Resource();
}
// When true is returned, a D3D12_RESOURCE_BARRIER has been created and must be used in a
// ResourceBarrier call. Failing to do so will cause the tracked state to become invalid and can
// cause subsequent errors.
bool Buffer::TrackUsageAndGetResourceBarrier(CommandRecordingContext* commandContext,
D3D12_RESOURCE_BARRIER* barrier,
wgpu::BufferUsage newUsage) {
// Track the underlying heap to ensure residency.
Heap* heap = ToBackend(mResourceAllocation.GetResourceHeap());
commandContext->TrackHeapUsage(heap, GetDevice()->GetPendingCommandSerial());
// Return the resource barrier.
return TransitionUsageAndGetResourceBarrier(commandContext, barrier, newUsage);
}
void Buffer::TrackUsageAndTransitionNow(CommandRecordingContext* commandContext,
wgpu::BufferUsage newUsage) {
D3D12_RESOURCE_BARRIER barrier;
if (TrackUsageAndGetResourceBarrier(commandContext, &barrier, newUsage)) {
commandContext->GetCommandList()->ResourceBarrier(1, &barrier);
}
}
// When true is returned, a D3D12_RESOURCE_BARRIER has been created and must be used in a
// ResourceBarrier call. Failing to do so will cause the tracked state to become invalid and can
// cause subsequent errors.
bool Buffer::TransitionUsageAndGetResourceBarrier(CommandRecordingContext* commandContext,
D3D12_RESOURCE_BARRIER* barrier,
wgpu::BufferUsage newUsage) {
// Resources in upload and readback heaps must be kept in the COPY_SOURCE/DEST state
if (mFixedResourceState) {
ASSERT(mLastUsage == newUsage);
return false;
}
D3D12_RESOURCE_STATES lastState = D3D12BufferUsage(mLastUsage);
D3D12_RESOURCE_STATES newState = D3D12BufferUsage(newUsage);
// If the transition is from-UAV-to-UAV, then a UAV barrier is needed.
// If one of the usages isn't UAV, then other barriers are used.
bool needsUAVBarrier = lastState == D3D12_RESOURCE_STATE_UNORDERED_ACCESS &&
newState == D3D12_RESOURCE_STATE_UNORDERED_ACCESS;
if (needsUAVBarrier) {
barrier->Type = D3D12_RESOURCE_BARRIER_TYPE_UAV;
barrier->Flags = D3D12_RESOURCE_BARRIER_FLAG_NONE;
barrier->UAV.pResource = GetD3D12Resource();
mLastUsage = newUsage;
return true;
}
// We can skip transitions to already current usages.
if (IsSubset(newUsage, mLastUsage)) {
return false;
}
mLastUsage = newUsage;
// The COMMON state represents a state where no write operations can be pending, which makes
// it possible to transition to and from some states without synchronizaton (i.e. without an
// explicit ResourceBarrier call). A buffer can be implicitly promoted to 1) a single write
// state, or 2) multiple read states. A buffer that is accessed within a command list will
// always implicitly decay to the COMMON state after the call to ExecuteCommandLists
// completes - this is because all buffer writes are guaranteed to be completed before the
// next ExecuteCommandLists call executes.
// https://docs.microsoft.com/en-us/windows/desktop/direct3d12/using-resource-barriers-to-synchronize-resource-states-in-direct3d-12#implicit-state-transitions
// To track implicit decays, we must record the pending serial on which a transition will
// occur. When that buffer is used again, the previously recorded serial must be compared to
// the last completed serial to determine if the buffer has implicity decayed to the common
// state.
const ExecutionSerial pendingCommandSerial =
ToBackend(GetDevice())->GetPendingCommandSerial();
if (pendingCommandSerial > mLastUsedSerial) {
lastState = D3D12_RESOURCE_STATE_COMMON;
mLastUsedSerial = pendingCommandSerial;
}
// All possible buffer states used by Dawn are eligible for implicit promotion from COMMON.
// These are: COPY_SOURCE, VERTEX_AND_COPY_BUFFER, INDEX_BUFFER, COPY_DEST,
// UNORDERED_ACCESS, and INDIRECT_ARGUMENT. Note that for implicit promotion, the
// destination state cannot be 1) more than one write state, or 2) both a read and write
// state. This goes unchecked here because it should not be allowed through render/compute
// pass validation.
if (lastState == D3D12_RESOURCE_STATE_COMMON) {
return false;
}
// TODO(crbug.com/dawn/1024): The before and after states must be different. Remove this
// workaround and use D3D12 states instead of WebGPU usages to manage the tracking of
// barrier state.
if (lastState == newState) {
return false;
}
barrier->Type = D3D12_RESOURCE_BARRIER_TYPE_TRANSITION;
barrier->Flags = D3D12_RESOURCE_BARRIER_FLAG_NONE;
barrier->Transition.pResource = GetD3D12Resource();
barrier->Transition.StateBefore = lastState;
barrier->Transition.StateAfter = newState;
barrier->Transition.Subresource = D3D12_RESOURCE_BARRIER_ALL_SUBRESOURCES;
return true;
}
D3D12_GPU_VIRTUAL_ADDRESS Buffer::GetVA() const {
return mResourceAllocation.GetGPUPointer();
}
bool Buffer::IsCPUWritableAtCreation() const {
// We use a staging buffer for the buffers with mappedAtCreation == true and created on the
// READBACK heap because for the buffers on the READBACK heap, the data written on the CPU
// side won't be uploaded to GPU. When we enable zero-initialization, the CPU side memory
// of the buffer is all written to 0 but not the GPU side memory, so on the next mapping
// operation the zeroes get overwritten by whatever was in the GPU memory when the buffer
// was created. With a staging buffer, the data on the CPU side will first upload to the
// staging buffer, and copied from the staging buffer to the GPU memory of the current
// buffer in the unmap() call.
// TODO(enga): Handle CPU-visible memory on UMA
return (GetUsage() & wgpu::BufferUsage::MapWrite) != 0;
}
MaybeError Buffer::MapInternal(bool isWrite,
size_t offset,
size_t size,
const char* contextInfo) {
// The mapped buffer can be accessed at any time, so it must be locked to ensure it is never
// evicted. This buffer should already have been made resident when it was created.
Heap* heap = ToBackend(mResourceAllocation.GetResourceHeap());
DAWN_TRY(ToBackend(GetDevice())->GetResidencyManager()->LockAllocation(heap));
D3D12_RANGE range = {offset, offset + size};
// mMappedData is the pointer to the start of the resource, irrespective of offset.
// MSDN says (note the weird use of "never"):
//
// When ppData is not NULL, the pointer returned is never offset by any values in
// pReadRange.
//
// https://docs.microsoft.com/en-us/windows/win32/api/d3d12/nf-d3d12-id3d12resource-map
DAWN_TRY(CheckHRESULT(GetD3D12Resource()->Map(0, &range, &mMappedData), contextInfo));
if (isWrite) {
mWrittenMappedRange = range;
}
return {};
}
MaybeError Buffer::MapAtCreationImpl() {
// We will use a staging buffer for MapRead buffers instead so we just clear the staging
// buffer and initialize the original buffer by copying the staging buffer to the original
// buffer one the first time Unmap() is called.
ASSERT((GetUsage() & wgpu::BufferUsage::MapWrite) != 0);
// The buffers with mappedAtCreation == true will be initialized in
// BufferBase::MapAtCreation().
DAWN_TRY(MapInternal(true, 0, size_t(GetAllocatedSize()), "D3D12 map at creation"));
return {};
}
MaybeError Buffer::MapAsyncImpl(wgpu::MapMode mode, size_t offset, size_t size) {
CommandRecordingContext* commandContext;
DAWN_TRY_ASSIGN(commandContext, ToBackend(GetDevice())->GetPendingCommandContext());
DAWN_TRY(EnsureDataInitialized(commandContext));
return MapInternal(mode & wgpu::MapMode::Write, offset, size, "D3D12 map async");
}
void Buffer::UnmapImpl() {
GetD3D12Resource()->Unmap(0, &mWrittenMappedRange);
mMappedData = nullptr;
mWrittenMappedRange = {0, 0};
// When buffers are mapped, they are locked to keep them in resident memory. We must unlock
// them when they are unmapped.
Heap* heap = ToBackend(mResourceAllocation.GetResourceHeap());
ToBackend(GetDevice())->GetResidencyManager()->UnlockAllocation(heap);
}
void* Buffer::GetMappedPointerImpl() {
// The frontend asks that the pointer returned is from the start of the resource
// irrespective of the offset passed in MapAsyncImpl, which is what mMappedData is.
return mMappedData;
}
void Buffer::DestroyImpl() {
if (mMappedData != nullptr) {
// If the buffer is currently mapped, unmap without flushing the writes to the GPU
// since the buffer cannot be used anymore. UnmapImpl checks mWrittenRange to know
// which parts to flush, so we set it to an empty range to prevent flushes.
mWrittenMappedRange = {0, 0};
}
BufferBase::DestroyImpl();
ToBackend(GetDevice())->DeallocateMemory(mResourceAllocation);
}
bool Buffer::CheckIsResidentForTesting() const {
Heap* heap = ToBackend(mResourceAllocation.GetResourceHeap());
return heap->IsInList() || heap->IsResidencyLocked();
}
bool Buffer::CheckAllocationMethodForTesting(AllocationMethod allocationMethod) const {
return mResourceAllocation.GetInfo().mMethod == allocationMethod;
}
MaybeError Buffer::EnsureDataInitialized(CommandRecordingContext* commandContext) {
if (!NeedsInitialization()) {
return {};
}
DAWN_TRY(InitializeToZero(commandContext));
return {};
}
ResultOrError<bool> Buffer::EnsureDataInitializedAsDestination(
CommandRecordingContext* commandContext,
uint64_t offset,
uint64_t size) {
if (!NeedsInitialization()) {
return {false};
}
if (IsFullBufferRange(offset, size)) {
SetIsDataInitialized();
return {false};
}
DAWN_TRY(InitializeToZero(commandContext));
return {true};
}
MaybeError Buffer::EnsureDataInitializedAsDestination(CommandRecordingContext* commandContext,
const CopyTextureToBufferCmd* copy) {
if (!NeedsInitialization()) {
return {};
}
if (IsFullBufferOverwrittenInTextureToBufferCopy(copy)) {
SetIsDataInitialized();
} else {
DAWN_TRY(InitializeToZero(commandContext));
}
return {};
}
void Buffer::SetLabelImpl() {
SetDebugName(ToBackend(GetDevice()), mResourceAllocation.GetD3D12Resource(), "Dawn_Buffer",
GetLabel());
}
MaybeError Buffer::InitializeToZero(CommandRecordingContext* commandContext) {
ASSERT(NeedsInitialization());
// TODO(crbug.com/dawn/484): skip initializing the buffer when it is created on a heap
// that has already been zero initialized.
DAWN_TRY(ClearBuffer(commandContext, uint8_t(0u)));
SetIsDataInitialized();
GetDevice()->IncrementLazyClearCountForTesting();
return {};
}
MaybeError Buffer::ClearBuffer(CommandRecordingContext* commandContext,
uint8_t clearValue,
uint64_t offset,
uint64_t size) {
Device* device = ToBackend(GetDevice());
size = size > 0 ? size : GetAllocatedSize();
// The state of the buffers on UPLOAD heap must always be GENERIC_READ and cannot be
// changed away, so we can only clear such buffer with buffer mapping.
if (D3D12HeapType(GetUsage()) == D3D12_HEAP_TYPE_UPLOAD) {
DAWN_TRY(MapInternal(true, static_cast<size_t>(offset), static_cast<size_t>(size),
"D3D12 map at clear buffer"));
memset(mMappedData, clearValue, size);
UnmapImpl();
} else if (clearValue == 0u) {
DAWN_TRY(device->ClearBufferToZero(commandContext, this, offset, size));
} else {
// TODO(crbug.com/dawn/852): use ClearUnorderedAccessView*() when the buffer usage
// includes STORAGE.
DynamicUploader* uploader = device->GetDynamicUploader();
UploadHandle uploadHandle;
DAWN_TRY_ASSIGN(uploadHandle,
uploader->Allocate(size, device->GetPendingCommandSerial(),
kCopyBufferToBufferOffsetAlignment));
memset(uploadHandle.mappedBuffer, clearValue, size);
device->CopyFromStagingToBufferImpl(commandContext, uploadHandle.stagingBuffer,
uploadHandle.startOffset, this, offset, size);
}
return {};
}
} // namespace dawn::native::d3d12