// Copyright 2017 The Dawn Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#include "dawn_native/PipelineLayout.h"

#include "common/Assert.h"
#include "common/BitSetIterator.h"
#include "common/ityp_stack_vec.h"
#include "dawn_native/BindGroupLayout.h"
#include "dawn_native/Device.h"
#include "dawn_native/ObjectContentHasher.h"
#include "dawn_native/ObjectType_autogen.h"
#include "dawn_native/ShaderModule.h"

namespace dawn_native {

    MaybeError ValidatePipelineLayoutDescriptor(
        DeviceBase* device,
        const PipelineLayoutDescriptor* descriptor,
        PipelineCompatibilityToken pipelineCompatibilityToken) {
        if (descriptor->nextInChain != nullptr) {
            return DAWN_VALIDATION_ERROR("nextInChain must be nullptr");
        }

        if (descriptor->bindGroupLayoutCount > kMaxBindGroups) {
            return DAWN_VALIDATION_ERROR("too many bind group layouts");
        }

        BindingCounts bindingCounts = {};
        for (uint32_t i = 0; i < descriptor->bindGroupLayoutCount; ++i) {
            DAWN_TRY(device->ValidateObject(descriptor->bindGroupLayouts[i]));
            if (descriptor->bindGroupLayouts[i]->GetPipelineCompatibilityToken() !=
                pipelineCompatibilityToken) {
                return DAWN_VALIDATION_ERROR(
                    "cannot create a pipeline layout using a bind group layout that was created as "
                    "part of a pipeline's default layout");
            }
            AccumulateBindingCounts(&bindingCounts,
                                    descriptor->bindGroupLayouts[i]->GetBindingCountInfo());
        }

        DAWN_TRY(ValidateBindingCounts(bindingCounts));
        return {};
    }

    // PipelineLayoutBase

    PipelineLayoutBase::PipelineLayoutBase(DeviceBase* device,
                                           const PipelineLayoutDescriptor* descriptor)
        : ApiObjectBase(device, kLabelNotImplemented) {
        ASSERT(descriptor->bindGroupLayoutCount <= kMaxBindGroups);
        for (BindGroupIndex group(0); group < BindGroupIndex(descriptor->bindGroupLayoutCount);
             ++group) {
            mBindGroupLayouts[group] = descriptor->bindGroupLayouts[static_cast<uint32_t>(group)];
            mMask.set(group);
        }
    }

    PipelineLayoutBase::PipelineLayoutBase(DeviceBase* device, ObjectBase::ErrorTag tag)
        : ApiObjectBase(device, tag) {
    }

    PipelineLayoutBase::~PipelineLayoutBase() {
        // Do not uncache the actual cached object if we are a blueprint
        if (IsCachedReference()) {
            GetDevice()->UncachePipelineLayout(this);
        }
    }

    // static
    PipelineLayoutBase* PipelineLayoutBase::MakeError(DeviceBase* device) {
        return new PipelineLayoutBase(device, ObjectBase::kError);
    }

    // static
    ResultOrError<Ref<PipelineLayoutBase>> PipelineLayoutBase::CreateDefault(
        DeviceBase* device,
        std::vector<StageAndDescriptor> stages) {
        using EntryMap = std::map<BindingNumber, BindGroupLayoutEntry>;

        // Merges two entries at the same location, if they are allowed to be merged.
        auto MergeEntries = [](BindGroupLayoutEntry* modifiedEntry,
                               const BindGroupLayoutEntry& mergedEntry) -> MaybeError {
            // Visibility is excluded because we take the OR across stages.
            bool compatible =
                modifiedEntry->binding == mergedEntry.binding &&
                modifiedEntry->buffer.type == mergedEntry.buffer.type &&
                modifiedEntry->sampler.type == mergedEntry.sampler.type &&
                // Compatibility between these sample types is checked below.
                (modifiedEntry->texture.sampleType != wgpu::TextureSampleType::Undefined) ==
                    (mergedEntry.texture.sampleType != wgpu::TextureSampleType::Undefined) &&
                modifiedEntry->storageTexture.access == mergedEntry.storageTexture.access;

            // Minimum buffer binding size excluded because we take the maximum seen across stages.
            if (modifiedEntry->buffer.type != wgpu::BufferBindingType::Undefined) {
                compatible = compatible && modifiedEntry->buffer.hasDynamicOffset ==
                                               mergedEntry.buffer.hasDynamicOffset;
            }

            if (modifiedEntry->texture.sampleType != wgpu::TextureSampleType::Undefined) {
                // Sample types are compatible if they are exactly equal,
                // or if the |modifiedEntry| is Float and the |mergedEntry| is UnfilterableFloat.
                // Note that the |mergedEntry| never has type Float. Texture bindings all start
                // as UnfilterableFloat and are promoted to Float if they are statically used with
                // a sampler.
                ASSERT(mergedEntry.texture.sampleType != wgpu::TextureSampleType::Float);
                bool compatibleSampleTypes =
                    modifiedEntry->texture.sampleType == mergedEntry.texture.sampleType ||
                    (modifiedEntry->texture.sampleType == wgpu::TextureSampleType::Float &&
                     mergedEntry.texture.sampleType == wgpu::TextureSampleType::UnfilterableFloat);
                compatible =
                    compatible && compatibleSampleTypes &&
                    modifiedEntry->texture.viewDimension == mergedEntry.texture.viewDimension &&
                    modifiedEntry->texture.multisampled == mergedEntry.texture.multisampled;
            }

            if (modifiedEntry->storageTexture.access != wgpu::StorageTextureAccess::Undefined) {
                compatible =
                    compatible &&
                    modifiedEntry->storageTexture.format == mergedEntry.storageTexture.format &&
                    modifiedEntry->storageTexture.viewDimension ==
                        mergedEntry.storageTexture.viewDimension;
            }

            // Check if any properties are incompatible with existing entry
            // If compatible, we will merge some properties
            if (!compatible) {
                return DAWN_VALIDATION_ERROR(
                    "Duplicate binding in default pipeline layout initialization "
                    "not compatible with previous declaration");
            }

            // Use the max |minBufferBindingSize| we find.
            modifiedEntry->buffer.minBindingSize =
                std::max(modifiedEntry->buffer.minBindingSize, mergedEntry.buffer.minBindingSize);

            // Use the OR of all the stages at which we find this binding.
            modifiedEntry->visibility |= mergedEntry.visibility;

            return {};
        };

        // Does the trivial conversions from a ShaderBindingInfo to a BindGroupLayoutEntry
        auto ConvertMetadataToEntry =
            [](const ShaderBindingInfo& shaderBinding,
               const ExternalTextureBindingLayout* externalTextureBindingEntry)
            -> BindGroupLayoutEntry {
            BindGroupLayoutEntry entry = {};
            switch (shaderBinding.bindingType) {
                case BindingInfoType::Buffer:
                    entry.buffer.type = shaderBinding.buffer.type;
                    entry.buffer.hasDynamicOffset = shaderBinding.buffer.hasDynamicOffset;
                    entry.buffer.minBindingSize = shaderBinding.buffer.minBindingSize;
                    break;
                case BindingInfoType::Sampler:
                    if (shaderBinding.sampler.isComparison) {
                        entry.sampler.type = wgpu::SamplerBindingType::Comparison;
                    } else {
                        entry.sampler.type = wgpu::SamplerBindingType::Filtering;
                    }
                    break;
                case BindingInfoType::Texture:
                    switch (shaderBinding.texture.compatibleSampleTypes) {
                        case SampleTypeBit::Depth:
                            entry.texture.sampleType = wgpu::TextureSampleType::Depth;
                            break;
                        case SampleTypeBit::Sint:
                            entry.texture.sampleType = wgpu::TextureSampleType::Sint;
                            break;
                        case SampleTypeBit::Uint:
                            entry.texture.sampleType = wgpu::TextureSampleType::Uint;
                            break;
                        case SampleTypeBit::Float:
                        case SampleTypeBit::UnfilterableFloat:
                        case SampleTypeBit::None:
                            UNREACHABLE();
                            break;
                        default:
                            if (shaderBinding.texture.compatibleSampleTypes ==
                                (SampleTypeBit::Float | SampleTypeBit::UnfilterableFloat)) {
                                // Default to UnfilterableFloat. It will be promoted to Float if it
                                // is used with a sampler.
                                entry.texture.sampleType =
                                    wgpu::TextureSampleType::UnfilterableFloat;
                            } else {
                                UNREACHABLE();
                            }
                    }
                    entry.texture.viewDimension = shaderBinding.texture.viewDimension;
                    entry.texture.multisampled = shaderBinding.texture.multisampled;
                    break;
                case BindingInfoType::StorageTexture:
                    entry.storageTexture.access = shaderBinding.storageTexture.access;
                    entry.storageTexture.format = shaderBinding.storageTexture.format;
                    entry.storageTexture.viewDimension = shaderBinding.storageTexture.viewDimension;
                    break;
                case BindingInfoType::ExternalTexture:
                    entry.nextInChain = externalTextureBindingEntry;
                    break;
            }
            return entry;
        };

        PipelineCompatibilityToken pipelineCompatibilityToken =
            device->GetNextPipelineCompatibilityToken();

        // Creates the BGL from the entries for a stage, checking it is valid.
        auto CreateBGL = [](DeviceBase* device, const EntryMap& entries,
                            PipelineCompatibilityToken pipelineCompatibilityToken)
            -> ResultOrError<Ref<BindGroupLayoutBase>> {
            std::vector<BindGroupLayoutEntry> entryVec;
            entryVec.reserve(entries.size());
            for (auto& it : entries) {
                entryVec.push_back(it.second);
            }

            BindGroupLayoutDescriptor desc = {};
            desc.entries = entryVec.data();
            desc.entryCount = entryVec.size();

            if (device->IsValidationEnabled()) {
                DAWN_TRY(ValidateBindGroupLayoutDescriptor(device, &desc));
            }
            return device->GetOrCreateBindGroupLayout(&desc, pipelineCompatibilityToken);
        };

        ASSERT(!stages.empty());

        // Data which BindGroupLayoutDescriptor will point to for creation
        ityp::array<BindGroupIndex, std::map<BindingNumber, BindGroupLayoutEntry>, kMaxBindGroups>
            entryData = {};

        // External texture binding layouts are chained structs that are set as a pointer within
        // the bind group layout entry. We declare an entry here so that it can be used when needed
        // in each BindGroupLayoutEntry and so it can stay alive until the call to
        // GetOrCreateBindGroupLayout. Because ExternalTextureBindingLayout is an empty struct,
        // there's no issue with using the same struct multiple times.
        ExternalTextureBindingLayout externalTextureBindingLayout;

        // Loops over all the reflected BindGroupLayoutEntries from shaders.
        for (const StageAndDescriptor& stage : stages) {
            const EntryPointMetadata& metadata = stage.module->GetEntryPoint(stage.entryPoint);

            for (BindGroupIndex group(0); group < metadata.bindings.size(); ++group) {
                for (const auto& bindingIt : metadata.bindings[group]) {
                    BindingNumber bindingNumber = bindingIt.first;
                    const ShaderBindingInfo& shaderBinding = bindingIt.second;

                    // Create the BindGroupLayoutEntry
                    BindGroupLayoutEntry entry =
                        ConvertMetadataToEntry(shaderBinding, &externalTextureBindingLayout);
                    entry.binding = static_cast<uint32_t>(bindingNumber);
                    entry.visibility = StageBit(stage.shaderStage);

                    // Add it to our map of all entries, if there is an existing entry, then we
                    // need to merge, if we can.
                    const auto& insertion = entryData[group].insert({bindingNumber, entry});
                    if (!insertion.second) {
                        DAWN_TRY(MergeEntries(&insertion.first->second, entry));
                    }
                }
            }

            // Promote any Unfilterable textures used with a sampler to Filtering.
            for (const EntryPointMetadata::SamplerTexturePair& pair :
                 metadata.samplerTexturePairs) {
                BindGroupLayoutEntry* entry = &entryData[pair.texture.group][pair.texture.binding];
                if (entry->texture.sampleType == wgpu::TextureSampleType::UnfilterableFloat) {
                    entry->texture.sampleType = wgpu::TextureSampleType::Float;
                }
            }
        }

        // Create the bind group layouts. We need to keep track of the last non-empty BGL because
        // Dawn doesn't yet know that an empty BGL and a null BGL are the same thing.
        // TODO(cwallez@chromium.org): remove this when Dawn knows that empty and null BGL are the
        // same.
        BindGroupIndex pipelineBGLCount = BindGroupIndex(0);
        ityp::array<BindGroupIndex, Ref<BindGroupLayoutBase>, kMaxBindGroups> bindGroupLayouts = {};
        for (BindGroupIndex group(0); group < kMaxBindGroupsTyped; ++group) {
            DAWN_TRY_ASSIGN(bindGroupLayouts[group],
                            CreateBGL(device, entryData[group], pipelineCompatibilityToken));
            if (entryData[group].size() != 0) {
                pipelineBGLCount = group + BindGroupIndex(1);
            }
        }

        // Create the deduced pipeline layout, validating if it is valid.
        ityp::array<BindGroupIndex, BindGroupLayoutBase*, kMaxBindGroups> bgls = {};
        for (BindGroupIndex group(0); group < pipelineBGLCount; ++group) {
            bgls[group] = bindGroupLayouts[group].Get();
        }

        PipelineLayoutDescriptor desc = {};
        desc.bindGroupLayouts = bgls.data();
        desc.bindGroupLayoutCount = static_cast<uint32_t>(pipelineBGLCount);

        DAWN_TRY(ValidatePipelineLayoutDescriptor(device, &desc, pipelineCompatibilityToken));

        Ref<PipelineLayoutBase> result;
        DAWN_TRY_ASSIGN(result, device->GetOrCreatePipelineLayout(&desc));
        ASSERT(!result->IsError());

        // Sanity check in debug that the pipeline layout is compatible with the current
        // pipeline.
        for (const StageAndDescriptor& stage : stages) {
            const EntryPointMetadata& metadata = stage.module->GetEntryPoint(stage.entryPoint);
            ASSERT(ValidateCompatibilityWithPipelineLayout(device, metadata, result.Get())
                       .IsSuccess());
        }

        return std::move(result);
    }

    ObjectType PipelineLayoutBase::GetType() const {
        return ObjectType::PipelineLayout;
    }

    const BindGroupLayoutBase* PipelineLayoutBase::GetBindGroupLayout(BindGroupIndex group) const {
        ASSERT(!IsError());
        ASSERT(group < kMaxBindGroupsTyped);
        ASSERT(mMask[group]);
        const BindGroupLayoutBase* bgl = mBindGroupLayouts[group].Get();
        ASSERT(bgl != nullptr);
        return bgl;
    }

    BindGroupLayoutBase* PipelineLayoutBase::GetBindGroupLayout(BindGroupIndex group) {
        ASSERT(!IsError());
        ASSERT(group < kMaxBindGroupsTyped);
        ASSERT(mMask[group]);
        BindGroupLayoutBase* bgl = mBindGroupLayouts[group].Get();
        ASSERT(bgl != nullptr);
        return bgl;
    }

    const BindGroupLayoutMask& PipelineLayoutBase::GetBindGroupLayoutsMask() const {
        ASSERT(!IsError());
        return mMask;
    }

    BindGroupLayoutMask PipelineLayoutBase::InheritedGroupsMask(
        const PipelineLayoutBase* other) const {
        ASSERT(!IsError());
        return {(1 << static_cast<uint32_t>(GroupsInheritUpTo(other))) - 1u};
    }

    BindGroupIndex PipelineLayoutBase::GroupsInheritUpTo(const PipelineLayoutBase* other) const {
        ASSERT(!IsError());

        for (BindGroupIndex i(0); i < kMaxBindGroupsTyped; ++i) {
            if (!mMask[i] || mBindGroupLayouts[i].Get() != other->mBindGroupLayouts[i].Get()) {
                return i;
            }
        }
        return kMaxBindGroupsTyped;
    }

    size_t PipelineLayoutBase::ComputeContentHash() {
        ObjectContentHasher recorder;
        recorder.Record(mMask);

        for (BindGroupIndex group : IterateBitSet(mMask)) {
            recorder.Record(GetBindGroupLayout(group)->GetContentHash());
        }

        return recorder.GetContentHash();
    }

    bool PipelineLayoutBase::EqualityFunc::operator()(const PipelineLayoutBase* a,
                                                      const PipelineLayoutBase* b) const {
        if (a->mMask != b->mMask) {
            return false;
        }

        for (BindGroupIndex group : IterateBitSet(a->mMask)) {
            if (a->GetBindGroupLayout(group) != b->GetBindGroupLayout(group)) {
                return false;
            }
        }

        return true;
    }

}  // namespace dawn_native