blob: b6eb3c3141a8bc583394f12eef21620a37dfc111 [file] [log] [blame]
// Copyright 2019 The Dawn Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "tests/perf_tests/DawnPerfTest.h"
#include <algorithm>
#include <fstream>
#include <limits>
#include "common/Assert.h"
#include "common/Log.h"
#include "dawn_platform/tracing/TraceEvent.h"
#include "tests/perf_tests/DawnPerfTestPlatform.h"
#include "utils/Timer.h"
namespace {
DawnPerfTestEnvironment* gTestEnv = nullptr;
void DumpTraceEventsToJSONFile(
const std::vector<DawnPerfTestPlatform::TraceEvent>& traceEventBuffer,
const char* traceFile) {
std::ofstream outFile;
outFile.open(traceFile, std::ios_base::app);
for (const DawnPerfTestPlatform::TraceEvent& traceEvent : traceEventBuffer) {
const char* category = nullptr;
switch (traceEvent.category) {
case dawn_platform::TraceCategory::General:
category = "general";
break;
case dawn_platform::TraceCategory::Validation:
category = "validation";
break;
case dawn_platform::TraceCategory::Recording:
category = "recording";
break;
case dawn_platform::TraceCategory::GPUWork:
category = "gpu";
break;
default:
UNREACHABLE();
}
uint64_t microseconds = static_cast<uint64_t>(traceEvent.timestamp * 1000.0 * 1000.0);
outFile << ", { "
<< "\"name\": \"" << traceEvent.name << "\", "
<< "\"cat\": \"" << category << "\", "
<< "\"ph\": \"" << traceEvent.phase << "\", "
<< "\"id\": " << traceEvent.id << ", "
<< "\"tid\": " << traceEvent.threadId << ", "
<< "\"ts\": " << microseconds << ", "
<< "\"pid\": \"Dawn\""
<< " }";
}
outFile.close();
}
} // namespace
void InitDawnPerfTestEnvironment(int argc, char** argv) {
gTestEnv = new DawnPerfTestEnvironment(argc, argv);
DawnTestEnvironment::SetEnvironment(gTestEnv);
testing::AddGlobalTestEnvironment(gTestEnv);
}
DawnPerfTestEnvironment::DawnPerfTestEnvironment(int argc, char** argv)
: DawnTestEnvironment(argc, argv) {
size_t argLen = 0; // Set when parsing --arg=X arguments
for (int i = 1; i < argc; ++i) {
if (strcmp("--calibration", argv[i]) == 0) {
mIsCalibrating = true;
continue;
}
constexpr const char kOverrideStepsArg[] = "--override-steps=";
argLen = sizeof(kOverrideStepsArg) - 1;
if (strncmp(argv[i], kOverrideStepsArg, argLen) == 0) {
const char* overrideSteps = argv[i] + argLen;
if (overrideSteps[0] != '\0') {
mOverrideStepsToRun = strtoul(overrideSteps, nullptr, 0);
}
continue;
}
constexpr const char kTraceFileArg[] = "--trace-file=";
argLen = sizeof(kTraceFileArg) - 1;
if (strncmp(argv[i], kTraceFileArg, argLen) == 0) {
const char* traceFile = argv[i] + argLen;
if (traceFile[0] != '\0') {
mTraceFile = traceFile;
}
continue;
}
if (strcmp("-h", argv[i]) == 0 || strcmp("--help", argv[i]) == 0) {
dawn::InfoLog()
<< "Additional flags:"
<< " [--calibration] [--override-steps=x] [--trace-file=file]\n"
<< " --calibration: Only run calibration. Calibration allows the perf test"
" runner script to save some time.\n"
<< " --override-steps: Set a fixed number of steps to run for each test\n"
<< " --trace-file: The file to dump trace results.\n";
continue;
}
}
}
DawnPerfTestEnvironment::~DawnPerfTestEnvironment() = default;
void DawnPerfTestEnvironment::SetUp() {
DawnTestEnvironment::SetUp();
mPlatform = std::make_unique<DawnPerfTestPlatform>();
mInstance->SetPlatform(mPlatform.get());
// Begin writing the trace event array.
if (mTraceFile != nullptr) {
std::ofstream outFile;
outFile.open(mTraceFile);
outFile << "{ \"traceEvents\": [";
outFile << "{}"; // Dummy object so trace events can always prepend a comma
outFile.flush();
outFile.close();
}
}
void DawnPerfTestEnvironment::TearDown() {
// End writing the trace event array.
if (mTraceFile != nullptr) {
std::vector<DawnPerfTestPlatform::TraceEvent> traceEventBuffer =
mPlatform->AcquireTraceEventBuffer();
// Write remaining trace events.
DumpTraceEventsToJSONFile(traceEventBuffer, mTraceFile);
std::ofstream outFile;
outFile.open(mTraceFile, std::ios_base::app);
outFile << "]}";
outFile << std::endl;
outFile.close();
}
DawnTestEnvironment::TearDown();
}
bool DawnPerfTestEnvironment::IsCalibrating() const {
return mIsCalibrating;
}
unsigned int DawnPerfTestEnvironment::OverrideStepsToRun() const {
return mOverrideStepsToRun;
}
const char* DawnPerfTestEnvironment::GetTraceFile() const {
return mTraceFile;
}
DawnPerfTestPlatform* DawnPerfTestEnvironment::GetPlatform() const {
return mPlatform.get();
}
DawnPerfTestBase::DawnPerfTestBase(DawnTestBase* test,
unsigned int iterationsPerStep,
unsigned int maxStepsInFlight)
: mTest(test),
mIterationsPerStep(iterationsPerStep),
mMaxStepsInFlight(maxStepsInFlight),
mTimer(utils::CreateTimer()) {
}
DawnPerfTestBase::~DawnPerfTestBase() = default;
void DawnPerfTestBase::AbortTest() {
mRunning = false;
}
void DawnPerfTestBase::RunTest() {
if (gTestEnv->OverrideStepsToRun() == 0) {
// Run to compute the approximate number of steps to perform.
mStepsToRun = std::numeric_limits<unsigned int>::max();
// Do a warmup run for calibration.
DoRunLoop(kCalibrationRunTimeSeconds);
DoRunLoop(kCalibrationRunTimeSeconds);
// Scale steps down according to the time that exceeded one second.
double scale = kCalibrationRunTimeSeconds / mTimer->GetElapsedTime();
mStepsToRun = static_cast<unsigned int>(static_cast<double>(mNumStepsPerformed) * scale);
// Calibration allows the perf test runner script to save some time.
if (gTestEnv->IsCalibrating()) {
PrintResult("steps", mStepsToRun, "count", false);
return;
}
} else {
mStepsToRun = gTestEnv->OverrideStepsToRun();
}
// Do another warmup run. Seems to consistently improve results.
DoRunLoop(kMaximumRunTimeSeconds);
DawnPerfTestPlatform* platform =
reinterpret_cast<DawnPerfTestPlatform*>(gTestEnv->GetPlatform());
const char* testName = ::testing::UnitTest::GetInstance()->current_test_info()->name();
// Only enable trace event recording in this section.
// We don't care about trace events during warmup and calibration.
platform->EnableTraceEventRecording(true);
{
TRACE_EVENT0(platform, General, testName);
for (unsigned int trial = 0; trial < kNumTrials; ++trial) {
TRACE_EVENT0(platform, General, "Trial");
DoRunLoop(kMaximumRunTimeSeconds);
OutputResults();
}
}
platform->EnableTraceEventRecording(false);
}
void DawnPerfTestBase::DoRunLoop(double maxRunTime) {
dawn_platform::Platform* platform = gTestEnv->GetPlatform();
mNumStepsPerformed = 0;
mCpuTime = 0;
mRunning = true;
uint64_t finishedIterations = 0;
uint64_t submittedIterations = 0;
mTimer->Start();
// This loop can be canceled by calling AbortTest().
while (mRunning) {
// Wait if there are too many steps in flight on the GPU.
while (submittedIterations - finishedIterations >= mMaxStepsInFlight) {
mTest->WaitABit();
}
TRACE_EVENT0(platform, General, "Step");
double stepStart = mTimer->GetElapsedTime();
Step();
mCpuTime += mTimer->GetElapsedTime() - stepStart;
submittedIterations++;
mTest->queue.OnSubmittedWorkDone(
0u,
[](WGPUQueueWorkDoneStatus, void* userdata) {
uint64_t* counter = static_cast<uint64_t*>(userdata);
(*counter)++;
},
&finishedIterations);
if (mRunning) {
++mNumStepsPerformed;
if (mTimer->GetElapsedTime() > maxRunTime) {
mRunning = false;
} else if (mNumStepsPerformed >= mStepsToRun) {
mRunning = false;
}
}
}
// Wait for all GPU commands to complete.
// TODO(enga): When Dawn has multiple backgrounds threads, add a Device::WaitForIdleForTesting()
// which waits for all threads to stop doing work. When we output results, there should
// be no additional incoming trace events.
while (submittedIterations != finishedIterations) {
mTest->WaitABit();
}
mTimer->Stop();
}
void DawnPerfTestBase::OutputResults() {
// TODO(enga): When Dawn has multiple backgrounds threads, add a Device::WaitForIdleForTesting()
// which waits for all threads to stop doing work. When we output results, there should
// be no additional incoming trace events.
DawnPerfTestPlatform* platform =
reinterpret_cast<DawnPerfTestPlatform*>(gTestEnv->GetPlatform());
std::vector<DawnPerfTestPlatform::TraceEvent> traceEventBuffer =
platform->AcquireTraceEventBuffer();
struct EventTracker {
double start = std::numeric_limits<double>::max();
double end = 0;
uint32_t count = 0;
};
EventTracker validationTracker = {};
EventTracker recordingTracker = {};
double totalValidationTime = 0;
double totalRecordingTime = 0;
// Note: We assume END timestamps always come after their corresponding BEGIN timestamps.
// TODO(enga): When Dawn has multiple threads, stratify by thread id.
for (const DawnPerfTestPlatform::TraceEvent& traceEvent : traceEventBuffer) {
EventTracker* tracker = nullptr;
double* totalTime = nullptr;
switch (traceEvent.category) {
case dawn_platform::TraceCategory::Validation:
tracker = &validationTracker;
totalTime = &totalValidationTime;
break;
case dawn_platform::TraceCategory::Recording:
tracker = &recordingTracker;
totalTime = &totalRecordingTime;
break;
default:
break;
}
if (tracker == nullptr) {
continue;
}
if (traceEvent.phase == TRACE_EVENT_PHASE_BEGIN) {
tracker->start = std::min(tracker->start, traceEvent.timestamp);
tracker->count++;
}
if (traceEvent.phase == TRACE_EVENT_PHASE_END) {
tracker->end = std::max(tracker->end, traceEvent.timestamp);
ASSERT(tracker->count > 0);
tracker->count--;
if (tracker->count == 0) {
*totalTime += (tracker->end - tracker->start);
*tracker = {};
}
}
}
PrintPerIterationResultFromSeconds("wall_time", mTimer->GetElapsedTime(), true);
PrintPerIterationResultFromSeconds("cpu_time", mCpuTime, true);
PrintPerIterationResultFromSeconds("validation_time", totalValidationTime, true);
PrintPerIterationResultFromSeconds("recording_time", totalRecordingTime, true);
const char* traceFile = gTestEnv->GetTraceFile();
if (traceFile != nullptr) {
DumpTraceEventsToJSONFile(traceEventBuffer, traceFile);
}
}
void DawnPerfTestBase::PrintPerIterationResultFromSeconds(const std::string& trace,
double valueInSeconds,
bool important) const {
if (valueInSeconds == 0) {
return;
}
double secondsPerIteration =
valueInSeconds / static_cast<double>(mNumStepsPerformed * mIterationsPerStep);
// Give the result a different name to ensure separate graphs if we transition.
if (secondsPerIteration > 1) {
PrintResult(trace, secondsPerIteration * 1e3, "ms", important);
} else if (secondsPerIteration > 1e-3) {
PrintResult(trace, secondsPerIteration * 1e6, "us", important);
} else {
PrintResult(trace, secondsPerIteration * 1e9, "ns", important);
}
}
void DawnPerfTestBase::PrintResult(const std::string& trace,
double value,
const std::string& units,
bool important) const {
PrintResultImpl(trace, std::to_string(value), units, important);
}
void DawnPerfTestBase::PrintResult(const std::string& trace,
unsigned int value,
const std::string& units,
bool important) const {
PrintResultImpl(trace, std::to_string(value), units, important);
}
void DawnPerfTestBase::PrintResultImpl(const std::string& trace,
const std::string& value,
const std::string& units,
bool important) const {
const ::testing::TestInfo* const testInfo =
::testing::UnitTest::GetInstance()->current_test_info();
std::string metric = std::string(testInfo->test_suite_name()) + "." + trace;
std::string story = testInfo->name();
std::replace(story.begin(), story.end(), '/', '_');
// The results are printed according to the format specified at
// [chromium]//src/tools/perf/generate_legacy_perf_dashboard_json.py
dawn::InfoLog() << (important ? "*" : "") << "RESULT " << metric << ": " << story << "= "
<< value << " " << units;
}