src/tests/end2end/ViewportTests.cpp - dawn - Git at Google

 // Copyright 2019 The Dawn Authors
 //
 // Licensed under the Apache License, Version 2.0 (the "License");
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
 //     http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
 // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 // See the License for the specific language governing permissions and
 // limitations under the License.

 #include "tests/DawnTest.h"

 #include "utils/ComboRenderPipelineDescriptor.h"
 #include "utils/WGPUHelpers.h"

 class ViewportTest : public DawnTest {
   private:
     void SetUp() override {
         DawnTest::SetUp();

         mQuadVS = utils::CreateShaderModule(device, R"(
             [[stage(vertex)]]
             fn main([[builtin(vertex_index)]] VertexIndex : u32) -> [[builtin(position)]] vec4<f32> {
                 var pos = array<vec2<f32>, 6>(
                     vec2<f32>(-1.0,  1.0),
                     vec2<f32>(-1.0, -1.0),
                     vec2<f32>( 1.0,  1.0),
                     vec2<f32>( 1.0,  1.0),
                     vec2<f32>(-1.0, -1.0),
                     vec2<f32>( 1.0, -1.0));
                 return vec4<f32>(pos[VertexIndex], 0.0, 1.0);
             })");

         mQuadFS = utils::CreateShaderModule(device, R"(
             [[stage(fragment)]] fn main() -> [[location(0)]] vec4<f32> {
                 return vec4<f32>(1.0, 1.0, 1.0, 1.0);
             })");
     }

   protected:
     wgpu::ShaderModule mQuadVS;
     wgpu::ShaderModule mQuadFS;

     static constexpr uint32_t kWidth = 5;
     static constexpr uint32_t kHeight = 6;

     // Viewport parameters are float, but use uint32_t because implementations of Vulkan are allowed
     // to just discard the fractional part.
     void TestViewportQuad(uint32_t x,
                           uint32_t y,
                           uint32_t width,
                           uint32_t height,
                           bool doViewportCall = true) {
         // Create a pipeline that will draw a white quad.
         utils::ComboRenderPipelineDescriptor pipelineDesc;
         pipelineDesc.vertex.module = mQuadVS;
         pipelineDesc.cFragment.module = mQuadFS;
         pipelineDesc.cTargets[0].format = wgpu::TextureFormat::RGBA8Unorm;
         wgpu::RenderPipeline pipeline = device.CreateRenderPipeline(&pipelineDesc);

         // Render the quad with the viewport call.
         utils::BasicRenderPass rp = utils::CreateBasicRenderPass(device, kWidth, kHeight);
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&rp.renderPassInfo);
         pass.SetPipeline(pipeline);
         if (doViewportCall) {
             pass.SetViewport(x, y, width, height, 0.0, 1.0);
         }
         pass.Draw(6);
         pass.EndPass();

         wgpu::CommandBuffer commands = encoder.Finish();
         queue.Submit(1, &commands);

         // Check that only the texels that are in the veiwport were drawn.
         for (uint32_t checkX = 0; checkX < kWidth; checkX++) {
             for (uint32_t checkY = 0; checkY < kHeight; checkY++) {
                 if (checkX >= x && checkX < x + width && checkY >= y && checkY < y + height) {
                     EXPECT_PIXEL_RGBA8_EQ(RGBA8::kWhite, rp.color, checkX, checkY);
                 } else {
                     EXPECT_PIXEL_RGBA8_EQ(RGBA8::kZero, rp.color, checkX, checkY);
                 }
             }
         }
     }

     void TestViewportDepth(float minDepth, float maxDepth, bool doViewportCall = true) {
         // Create a pipeline drawing 3 points at depth 1.0, 0.5 and 0.0.
         utils::ComboRenderPipelineDescriptor pipelineDesc;
         pipelineDesc.vertex.module = utils::CreateShaderModule(device, R"(
             [[stage(vertex)]]
             fn main([[builtin(vertex_index)]] VertexIndex : u32) -> [[builtin(position)]] vec4<f32> {
                 var points : array<vec3<f32>, 3> = array<vec3<f32>, 3>(
                     vec3<f32>(-0.9, 0.0, 1.0),
                     vec3<f32>( 0.0, 0.0, 0.5),
                     vec3<f32>( 0.9, 0.0, 0.0));
                 return vec4<f32>(points[VertexIndex], 1.0);
             })");
         pipelineDesc.cFragment.module = mQuadFS;
         pipelineDesc.cFragment.targetCount = 0;
         pipelineDesc.primitive.topology = wgpu::PrimitiveTopology::PointList;
         wgpu::DepthStencilState* depthStencil =
             pipelineDesc.EnableDepthStencil(wgpu::TextureFormat::Depth32Float);
         depthStencil->depthWriteEnabled = true;
         wgpu::RenderPipeline pipeline = device.CreateRenderPipeline(&pipelineDesc);

         // Create the texture that will store the post-viewport-transform depth.
         wgpu::TextureDescriptor depthDesc;
         depthDesc.size = {3, 1, 1};
         depthDesc.format = wgpu::TextureFormat::Depth32Float;
         depthDesc.usage = wgpu::TextureUsage::RenderAttachment | wgpu::TextureUsage::CopySrc;
         wgpu::Texture depthTexture = device.CreateTexture(&depthDesc);

         // Render the three points with the viewport call.
         utils::ComboRenderPassDescriptor rpDesc({}, depthTexture.CreateView());
         rpDesc.cDepthStencilAttachmentInfo.clearDepth = 0.0f;
         rpDesc.cDepthStencilAttachmentInfo.depthLoadOp = wgpu::LoadOp::Clear;
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&rpDesc);
         pass.SetPipeline(pipeline);
         if (doViewportCall) {
             pass.SetViewport(0, 0, 3, 1, minDepth, maxDepth);
         }
         pass.Draw(3);
         pass.EndPass();

         wgpu::CommandBuffer commands = encoder.Finish();
         queue.Submit(1, &commands);

         // Check that the viewport transform was computed correctly for the depth.
         std::vector<float> expected = {
             maxDepth,
             (maxDepth + minDepth) / 2,
             minDepth,
         };
         EXPECT_TEXTURE_EQ(expected.data(), depthTexture, {0, 0}, {3, 1});
     }
 };

 // Test that by default the full viewport is used.
 TEST_P(ViewportTest, DefaultViewportRect) {
     TestViewportQuad(0, 0, kWidth, kHeight, false);
 }

 // Test various viewport values in the X direction.
 TEST_P(ViewportTest, VaryingInX) {
     TestViewportQuad(0, 0, kWidth - 1, kHeight);
     TestViewportQuad(1, 0, kWidth - 1, kHeight);
     TestViewportQuad(2, 0, 1, kHeight);
 }

 // Test various viewport values in the Y direction.
 TEST_P(ViewportTest, VaryingInY) {
     TestViewportQuad(0, 0, kWidth, kHeight - 1);
     TestViewportQuad(0, 1, kWidth, kHeight - 1);
     TestViewportQuad(0, 2, kWidth, 1);
 }

 // Test various viewport values in both X and Y
 TEST_P(ViewportTest, SubBoxes) {
     TestViewportQuad(1, 1, kWidth - 2, kHeight - 2);
     TestViewportQuad(2, 2, 2, 2);
     TestViewportQuad(2, 3, 2, 1);
 }

 // Test that by default the [0, 1] depth range is used.
 TEST_P(ViewportTest, DefaultViewportDepth) {
     TestViewportDepth(0.0, 1.0, false);
 }

 // Test various viewport depth ranges
 TEST_P(ViewportTest, ViewportDepth) {
     TestViewportDepth(0.0, 0.5);
     TestViewportDepth(0.5, 1.0);
 }

 // Test that a draw with an empty viewport doesn't draw anything.
 TEST_P(ViewportTest, EmptyViewport) {
     utils::ComboRenderPipelineDescriptor pipelineDescriptor;
     pipelineDescriptor.cTargets[0].format = wgpu::TextureFormat::RGBA8Unorm;
     pipelineDescriptor.vertex.module = mQuadVS;
     pipelineDescriptor.cFragment.module = mQuadFS;
     wgpu::RenderPipeline pipeline = device.CreateRenderPipeline(&pipelineDescriptor);

     utils::BasicRenderPass renderPass = utils::CreateBasicRenderPass(device, 1, 1);

     auto DoEmptyViewportTest = [&](uint32_t width, uint32_t height) {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo);
         pass.SetPipeline(pipeline);
         pass.SetViewport(0.0f, 0.0f, width, height, 0.0f, 1.0f);
         pass.Draw(6);
         pass.EndPass();

         wgpu::CommandBuffer commands = encoder.Finish();
         queue.Submit(1, &commands);

         EXPECT_PIXEL_RGBA8_EQ(RGBA8::kZero, renderPass.color, 0, 0);
     };

     // Test with a 0x0, 0xN and nx0 viewport.
     DoEmptyViewportTest(0, 0);
     DoEmptyViewportTest(0, 1);
     DoEmptyViewportTest(1, 0);
 }

 DAWN_INSTANTIATE_TEST(ViewportTest,
                       D3D12Backend(),
                       MetalBackend(),
                       OpenGLBackend(),
                       OpenGLESBackend(),
                       VulkanBackend());
	// Copyright 2019 The Dawn Authors
	//
	// Licensed under the Apache License, Version 2.0 (the "License");
	// you may not use this file except in compliance with the License.
	// You may obtain a copy of the License at
	//
	// http://www.apache.org/licenses/LICENSE-2.0
	//
	// Unless required by applicable law or agreed to in writing, software
	// distributed under the License is distributed on an "AS IS" BASIS,
	// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	// See the License for the specific language governing permissions and
	// limitations under the License.

	#include "tests/DawnTest.h"

	#include "utils/ComboRenderPipelineDescriptor.h"
	#include "utils/WGPUHelpers.h"

	class ViewportTest : public DawnTest {
	private:
	void SetUp() override {
	DawnTest::SetUp();

	mQuadVS = utils::CreateShaderModule(device, R"(
	[[stage(vertex)]]
	fn main([[builtin(vertex_index)]] VertexIndex : u32) -> [[builtin(position)]] vec4<f32> {
	var pos = array<vec2<f32>, 6>(
	vec2<f32>(-1.0, 1.0),
	vec2<f32>(-1.0, -1.0),
	vec2<f32>( 1.0, 1.0),
	vec2<f32>( 1.0, 1.0),
	vec2<f32>(-1.0, -1.0),
	vec2<f32>( 1.0, -1.0));
	return vec4<f32>(pos[VertexIndex], 0.0, 1.0);
	})");

	mQuadFS = utils::CreateShaderModule(device, R"(
	[[stage(fragment)]] fn main() -> [[location(0)]] vec4<f32> {
	return vec4<f32>(1.0, 1.0, 1.0, 1.0);
	})");
	}

	protected:
	wgpu::ShaderModule mQuadVS;
	wgpu::ShaderModule mQuadFS;

	static constexpr uint32_t kWidth = 5;
	static constexpr uint32_t kHeight = 6;

	// Viewport parameters are float, but use uint32_t because implementations of Vulkan are allowed
	// to just discard the fractional part.
	void TestViewportQuad(uint32_t x,
	uint32_t y,
	uint32_t width,
	uint32_t height,
	bool doViewportCall = true) {
	// Create a pipeline that will draw a white quad.
	utils::ComboRenderPipelineDescriptor pipelineDesc;
	pipelineDesc.vertex.module = mQuadVS;
	pipelineDesc.cFragment.module = mQuadFS;
	pipelineDesc.cTargets[0].format = wgpu::TextureFormat::RGBA8Unorm;
	wgpu::RenderPipeline pipeline = device.CreateRenderPipeline(&pipelineDesc);

	// Render the quad with the viewport call.
	utils::BasicRenderPass rp = utils::CreateBasicRenderPass(device, kWidth, kHeight);
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&rp.renderPassInfo);
	pass.SetPipeline(pipeline);
	if (doViewportCall) {
	pass.SetViewport(x, y, width, height, 0.0, 1.0);
	}
	pass.Draw(6);
	pass.EndPass();

	wgpu::CommandBuffer commands = encoder.Finish();
	queue.Submit(1, &commands);

	// Check that only the texels that are in the veiwport were drawn.
	for (uint32_t checkX = 0; checkX < kWidth; checkX++) {
	for (uint32_t checkY = 0; checkY < kHeight; checkY++) {
	if (checkX >= x && checkX < x + width && checkY >= y && checkY < y + height) {
	EXPECT_PIXEL_RGBA8_EQ(RGBA8::kWhite, rp.color, checkX, checkY);
	} else {
	EXPECT_PIXEL_RGBA8_EQ(RGBA8::kZero, rp.color, checkX, checkY);
	}
	}
	}
	}

	void TestViewportDepth(float minDepth, float maxDepth, bool doViewportCall = true) {
	// Create a pipeline drawing 3 points at depth 1.0, 0.5 and 0.0.
	utils::ComboRenderPipelineDescriptor pipelineDesc;
	pipelineDesc.vertex.module = utils::CreateShaderModule(device, R"(
	[[stage(vertex)]]
	fn main([[builtin(vertex_index)]] VertexIndex : u32) -> [[builtin(position)]] vec4<f32> {
	var points : array<vec3<f32>, 3> = array<vec3<f32>, 3>(
	vec3<f32>(-0.9, 0.0, 1.0),
	vec3<f32>( 0.0, 0.0, 0.5),
	vec3<f32>( 0.9, 0.0, 0.0));
	return vec4<f32>(points[VertexIndex], 1.0);
	})");
	pipelineDesc.cFragment.module = mQuadFS;
	pipelineDesc.cFragment.targetCount = 0;
	pipelineDesc.primitive.topology = wgpu::PrimitiveTopology::PointList;
	wgpu::DepthStencilState* depthStencil =
	pipelineDesc.EnableDepthStencil(wgpu::TextureFormat::Depth32Float);
	depthStencil->depthWriteEnabled = true;
	wgpu::RenderPipeline pipeline = device.CreateRenderPipeline(&pipelineDesc);

	// Create the texture that will store the post-viewport-transform depth.
	wgpu::TextureDescriptor depthDesc;
	depthDesc.size = {3, 1, 1};
	depthDesc.format = wgpu::TextureFormat::Depth32Float;
	depthDesc.usage = wgpu::TextureUsage::RenderAttachment \| wgpu::TextureUsage::CopySrc;
	wgpu::Texture depthTexture = device.CreateTexture(&depthDesc);

	// Render the three points with the viewport call.
	utils::ComboRenderPassDescriptor rpDesc({}, depthTexture.CreateView());
	rpDesc.cDepthStencilAttachmentInfo.clearDepth = 0.0f;
	rpDesc.cDepthStencilAttachmentInfo.depthLoadOp = wgpu::LoadOp::Clear;
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&rpDesc);
	pass.SetPipeline(pipeline);
	if (doViewportCall) {
	pass.SetViewport(0, 0, 3, 1, minDepth, maxDepth);
	}
	pass.Draw(3);
	pass.EndPass();

	wgpu::CommandBuffer commands = encoder.Finish();
	queue.Submit(1, &commands);

	// Check that the viewport transform was computed correctly for the depth.
	std::vector<float> expected = {
	maxDepth,
	(maxDepth + minDepth) / 2,
	minDepth,
	};
	EXPECT_TEXTURE_EQ(expected.data(), depthTexture, {0, 0}, {3, 1});
	}
	};

	// Test that by default the full viewport is used.
	TEST_P(ViewportTest, DefaultViewportRect) {
	TestViewportQuad(0, 0, kWidth, kHeight, false);
	}

	// Test various viewport values in the X direction.
	TEST_P(ViewportTest, VaryingInX) {
	TestViewportQuad(0, 0, kWidth - 1, kHeight);
	TestViewportQuad(1, 0, kWidth - 1, kHeight);
	TestViewportQuad(2, 0, 1, kHeight);
	}

	// Test various viewport values in the Y direction.
	TEST_P(ViewportTest, VaryingInY) {
	TestViewportQuad(0, 0, kWidth, kHeight - 1);
	TestViewportQuad(0, 1, kWidth, kHeight - 1);
	TestViewportQuad(0, 2, kWidth, 1);
	}

	// Test various viewport values in both X and Y
	TEST_P(ViewportTest, SubBoxes) {
	TestViewportQuad(1, 1, kWidth - 2, kHeight - 2);
	TestViewportQuad(2, 2, 2, 2);
	TestViewportQuad(2, 3, 2, 1);
	}

	// Test that by default the [0, 1] depth range is used.
	TEST_P(ViewportTest, DefaultViewportDepth) {
	TestViewportDepth(0.0, 1.0, false);
	}

	// Test various viewport depth ranges
	TEST_P(ViewportTest, ViewportDepth) {
	TestViewportDepth(0.0, 0.5);
	TestViewportDepth(0.5, 1.0);
	}

	// Test that a draw with an empty viewport doesn't draw anything.
	TEST_P(ViewportTest, EmptyViewport) {
	utils::ComboRenderPipelineDescriptor pipelineDescriptor;
	pipelineDescriptor.cTargets[0].format = wgpu::TextureFormat::RGBA8Unorm;
	pipelineDescriptor.vertex.module = mQuadVS;
	pipelineDescriptor.cFragment.module = mQuadFS;
	wgpu::RenderPipeline pipeline = device.CreateRenderPipeline(&pipelineDescriptor);

	utils::BasicRenderPass renderPass = utils::CreateBasicRenderPass(device, 1, 1);

	auto DoEmptyViewportTest = [&](uint32_t width, uint32_t height) {
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo);
	pass.SetPipeline(pipeline);
	pass.SetViewport(0.0f, 0.0f, width, height, 0.0f, 1.0f);
	pass.Draw(6);
	pass.EndPass();

	wgpu::CommandBuffer commands = encoder.Finish();
	queue.Submit(1, &commands);

	EXPECT_PIXEL_RGBA8_EQ(RGBA8::kZero, renderPass.color, 0, 0);
	};

	// Test with a 0x0, 0xN and nx0 viewport.
	DoEmptyViewportTest(0, 0);
	DoEmptyViewportTest(0, 1);
	DoEmptyViewportTest(1, 0);
	}

	DAWN_INSTANTIATE_TEST(ViewportTest,
	D3D12Backend(),
	MetalBackend(),
	OpenGLBackend(),
	OpenGLESBackend(),
	VulkanBackend());