blob: 69811d128cd8fc94e236147159f10c7e26dedcaa [file] [log] [blame]
// Copyright 2019 The Dawn Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "dawn_wire/client/Buffer.h"
#include "dawn_wire/BufferConsumer_impl.h"
#include "dawn_wire/WireCmd_autogen.h"
#include "dawn_wire/client/Client.h"
#include "dawn_wire/client/Device.h"
namespace dawn::wire::client {
// static
WGPUBuffer Buffer::Create(Device* device, const WGPUBufferDescriptor* descriptor) {
Client* wireClient = device->client;
bool mappable =
(descriptor->usage & (WGPUBufferUsage_MapRead | WGPUBufferUsage_MapWrite)) != 0 ||
descriptor->mappedAtCreation;
if (mappable && descriptor->size >= std::numeric_limits<size_t>::max()) {
device->InjectError(WGPUErrorType_OutOfMemory, "Buffer is too large for map usage");
return device->CreateErrorBuffer();
}
std::unique_ptr<MemoryTransferService::ReadHandle> readHandle = nullptr;
std::unique_ptr<MemoryTransferService::WriteHandle> writeHandle = nullptr;
DeviceCreateBufferCmd cmd;
cmd.deviceId = device->id;
cmd.descriptor = descriptor;
cmd.readHandleCreateInfoLength = 0;
cmd.readHandleCreateInfo = nullptr;
cmd.writeHandleCreateInfoLength = 0;
cmd.writeHandleCreateInfo = nullptr;
if (mappable) {
if ((descriptor->usage & WGPUBufferUsage_MapRead) != 0) {
// Create the read handle on buffer creation.
readHandle.reset(
wireClient->GetMemoryTransferService()->CreateReadHandle(descriptor->size));
if (readHandle == nullptr) {
device->InjectError(WGPUErrorType_OutOfMemory,
"Failed to create buffer mapping");
return device->CreateErrorBuffer();
}
cmd.readHandleCreateInfoLength = readHandle->SerializeCreateSize();
}
if ((descriptor->usage & WGPUBufferUsage_MapWrite) != 0 ||
descriptor->mappedAtCreation) {
// Create the write handle on buffer creation.
writeHandle.reset(
wireClient->GetMemoryTransferService()->CreateWriteHandle(descriptor->size));
if (writeHandle == nullptr) {
device->InjectError(WGPUErrorType_OutOfMemory,
"Failed to create buffer mapping");
return device->CreateErrorBuffer();
}
cmd.writeHandleCreateInfoLength = writeHandle->SerializeCreateSize();
}
}
// Create the buffer and send the creation command.
// This must happen after any potential device->CreateErrorBuffer()
// as server expects allocating ids to be monotonically increasing
auto* bufferObjectAndSerial = wireClient->BufferAllocator().New(wireClient);
Buffer* buffer = bufferObjectAndSerial->object.get();
buffer->mDevice = device;
buffer->mDeviceIsAlive = device->GetAliveWeakPtr();
buffer->mSize = descriptor->size;
buffer->mDestructWriteHandleOnUnmap = false;
if (descriptor->mappedAtCreation) {
// If the buffer is mapped at creation, a write handle is created and will be
// destructed on unmap if the buffer doesn't have MapWrite usage
// The buffer is mapped right now.
buffer->mMapState = MapState::MappedAtCreation;
// This flag is for write handle created by mappedAtCreation
// instead of MapWrite usage. We don't have such a case for read handle
buffer->mDestructWriteHandleOnUnmap =
(descriptor->usage & WGPUBufferUsage_MapWrite) == 0;
buffer->mMapOffset = 0;
buffer->mMapSize = buffer->mSize;
ASSERT(writeHandle != nullptr);
buffer->mMappedData = writeHandle->GetData();
}
cmd.result = ObjectHandle{buffer->id, bufferObjectAndSerial->generation};
wireClient->SerializeCommand(
cmd, cmd.readHandleCreateInfoLength + cmd.writeHandleCreateInfoLength,
[&](SerializeBuffer* serializeBuffer) {
if (readHandle != nullptr) {
char* readHandleBuffer;
WIRE_TRY(
serializeBuffer->NextN(cmd.readHandleCreateInfoLength, &readHandleBuffer));
// Serialize the ReadHandle into the space after the command.
readHandle->SerializeCreate(readHandleBuffer);
buffer->mReadHandle = std::move(readHandle);
}
if (writeHandle != nullptr) {
char* writeHandleBuffer;
WIRE_TRY(serializeBuffer->NextN(cmd.writeHandleCreateInfoLength,
&writeHandleBuffer));
// Serialize the WriteHandle into the space after the command.
writeHandle->SerializeCreate(writeHandleBuffer);
buffer->mWriteHandle = std::move(writeHandle);
}
return WireResult::Success;
});
return ToAPI(buffer);
}
// static
WGPUBuffer Buffer::CreateError(Device* device) {
auto* allocation = device->client->BufferAllocator().New(device->client);
allocation->object->mDevice = device;
allocation->object->mDeviceIsAlive = device->GetAliveWeakPtr();
DeviceCreateErrorBufferCmd cmd;
cmd.self = ToAPI(device);
cmd.result = ObjectHandle{allocation->object->id, allocation->generation};
device->client->SerializeCommand(cmd);
return ToAPI(allocation->object.get());
}
Buffer::~Buffer() {
ClearAllCallbacks(WGPUBufferMapAsyncStatus_DestroyedBeforeCallback);
FreeMappedData();
}
void Buffer::CancelCallbacksForDisconnect() {
ClearAllCallbacks(WGPUBufferMapAsyncStatus_DeviceLost);
}
void Buffer::ClearAllCallbacks(WGPUBufferMapAsyncStatus status) {
mRequests.CloseAll([status](MapRequestData* request) {
if (request->callback != nullptr) {
request->callback(status, request->userdata);
}
});
}
void Buffer::MapAsync(WGPUMapModeFlags mode,
size_t offset,
size_t size,
WGPUBufferMapCallback callback,
void* userdata) {
if (client->IsDisconnected()) {
return callback(WGPUBufferMapAsyncStatus_DeviceLost, userdata);
}
// Handle the defaulting of size required by WebGPU.
if ((size == WGPU_WHOLE_MAP_SIZE) && (offset <= mSize)) {
size = mSize - offset;
}
// Create the request structure that will hold information while this mapping is
// in flight.
MapRequestData request = {};
request.callback = callback;
request.userdata = userdata;
request.offset = offset;
request.size = size;
if (mode & WGPUMapMode_Read) {
request.type = MapRequestType::Read;
} else if (mode & WGPUMapMode_Write) {
request.type = MapRequestType::Write;
}
uint64_t serial = mRequests.Add(std::move(request));
// Serialize the command to send to the server.
BufferMapAsyncCmd cmd;
cmd.bufferId = this->id;
cmd.requestSerial = serial;
cmd.mode = mode;
cmd.offset = offset;
cmd.size = size;
client->SerializeCommand(cmd);
}
bool Buffer::OnMapAsyncCallback(uint64_t requestSerial,
uint32_t status,
uint64_t readDataUpdateInfoLength,
const uint8_t* readDataUpdateInfo) {
MapRequestData request;
if (!mRequests.Acquire(requestSerial, &request)) {
return false;
}
auto FailRequest = [&request]() -> bool {
if (request.callback != nullptr) {
request.callback(WGPUBufferMapAsyncStatus_DeviceLost, request.userdata);
}
return false;
};
// Take into account the client-side status of the request if the server says it is a success.
if (status == WGPUBufferMapAsyncStatus_Success) {
status = request.clientStatus;
}
if (status == WGPUBufferMapAsyncStatus_Success) {
switch (request.type) {
case MapRequestType::Read: {
if (readDataUpdateInfoLength > std::numeric_limits<size_t>::max()) {
// This is the size of data deserialized from the command stream, which must
// be CPU-addressable.
return FailRequest();
}
// Validate to prevent bad map request; buffer destroyed during map request
if (mReadHandle == nullptr) {
return FailRequest();
}
// Update user map data with server returned data
if (!mReadHandle->DeserializeDataUpdate(
readDataUpdateInfo, static_cast<size_t>(readDataUpdateInfoLength),
request.offset, request.size)) {
return FailRequest();
}
mMapState = MapState::MappedForRead;
mMappedData = const_cast<void*>(mReadHandle->GetData());
break;
}
case MapRequestType::Write: {
if (mWriteHandle == nullptr) {
return FailRequest();
}
mMapState = MapState::MappedForWrite;
mMappedData = mWriteHandle->GetData();
break;
}
default:
UNREACHABLE();
}
mMapOffset = request.offset;
mMapSize = request.size;
}
if (request.callback) {
request.callback(static_cast<WGPUBufferMapAsyncStatus>(status), request.userdata);
}
return true;
}
void* Buffer::GetMappedRange(size_t offset, size_t size) {
if (!IsMappedForWriting() || !CheckGetMappedRangeOffsetSize(offset, size)) {
return nullptr;
}
return static_cast<uint8_t*>(mMappedData) + offset;
}
const void* Buffer::GetConstMappedRange(size_t offset, size_t size) {
if (!(IsMappedForWriting() || IsMappedForReading()) ||
!CheckGetMappedRangeOffsetSize(offset, size)) {
return nullptr;
}
return static_cast<uint8_t*>(mMappedData) + offset;
}
void Buffer::Unmap() {
// Invalidate the local pointer, and cancel all other in-flight requests that would
// turn into errors anyway (you can't double map). This prevents race when the following
// happens, where the application code would have unmapped a buffer but still receive a
// callback:
// - Client -> Server: MapRequest1, Unmap, MapRequest2
// - Server -> Client: Result of MapRequest1
// - Unmap locally on the client
// - Server -> Client: Result of MapRequest2
// mWriteHandle can still be nullptr if buffer has been destroyed before unmap
if ((mMapState == MapState::MappedForWrite || mMapState == MapState::MappedAtCreation) &&
mWriteHandle != nullptr) {
// Writes need to be flushed before Unmap is sent. Unmap calls all associated
// in-flight callbacks which may read the updated data.
// Get the serialization size of data update writes.
size_t writeDataUpdateInfoLength =
mWriteHandle->SizeOfSerializeDataUpdate(mMapOffset, mMapSize);
BufferUpdateMappedDataCmd cmd;
cmd.bufferId = id;
cmd.writeDataUpdateInfoLength = writeDataUpdateInfoLength;
cmd.writeDataUpdateInfo = nullptr;
cmd.offset = mMapOffset;
cmd.size = mMapSize;
client->SerializeCommand(
cmd, writeDataUpdateInfoLength, [&](SerializeBuffer* serializeBuffer) {
char* writeHandleBuffer;
WIRE_TRY(serializeBuffer->NextN(writeDataUpdateInfoLength, &writeHandleBuffer));
// Serialize flush metadata into the space after the command.
// This closes the handle for writing.
mWriteHandle->SerializeDataUpdate(writeHandleBuffer, cmd.offset, cmd.size);
return WireResult::Success;
});
// If mDestructWriteHandleOnUnmap is true, that means the write handle is merely
// for mappedAtCreation usage. It is destroyed on unmap after flush to server
// instead of at buffer destruction.
if (mMapState == MapState::MappedAtCreation && mDestructWriteHandleOnUnmap) {
mWriteHandle = nullptr;
if (mReadHandle) {
// If it's both mappedAtCreation and MapRead we need to reset
// mMappedData to readHandle's GetData(). This could be changed to
// merging read/write handle in future
mMappedData = const_cast<void*>(mReadHandle->GetData());
}
}
}
// Free map access tokens
mMapState = MapState::Unmapped;
mMapOffset = 0;
mMapSize = 0;
// Tag all mapping requests still in flight as unmapped before callback.
mRequests.ForAll([](MapRequestData* request) {
if (request->clientStatus == WGPUBufferMapAsyncStatus_Success) {
request->clientStatus = WGPUBufferMapAsyncStatus_UnmappedBeforeCallback;
}
});
BufferUnmapCmd cmd;
cmd.self = ToAPI(this);
client->SerializeCommand(cmd);
}
void Buffer::Destroy() {
// Remove the current mapping and destroy Read/WriteHandles.
FreeMappedData();
// Tag all mapping requests still in flight as destroyed before callback.
mRequests.ForAll([](MapRequestData* request) {
if (request->clientStatus == WGPUBufferMapAsyncStatus_Success) {
request->clientStatus = WGPUBufferMapAsyncStatus_DestroyedBeforeCallback;
}
});
BufferDestroyCmd cmd;
cmd.self = ToAPI(this);
client->SerializeCommand(cmd);
}
bool Buffer::IsMappedForReading() const {
return mMapState == MapState::MappedForRead;
}
bool Buffer::IsMappedForWriting() const {
return mMapState == MapState::MappedForWrite || mMapState == MapState::MappedAtCreation;
}
bool Buffer::CheckGetMappedRangeOffsetSize(size_t offset, size_t size) const {
if (offset % 8 != 0 || size % 4 != 0) {
return false;
}
if (size > mMapSize || offset < mMapOffset) {
return false;
}
size_t offsetInMappedRange = offset - mMapOffset;
return offsetInMappedRange <= mMapSize - size;
}
void Buffer::FreeMappedData() {
#if defined(DAWN_ENABLE_ASSERTS)
// When in "debug" mode, 0xCA-out the mapped data when we free it so that in we can detect
// use-after-free of the mapped data. This is particularly useful for WebGPU test about the
// interaction of mapping and GC.
if (mMappedData) {
memset(static_cast<uint8_t*>(mMappedData) + mMapOffset, 0xCA, mMapSize);
}
#endif // defined(DAWN_ENABLE_ASSERTS)
mMapOffset = 0;
mMapSize = 0;
mReadHandle = nullptr;
mWriteHandle = nullptr;
mMappedData = nullptr;
}
} // namespace dawn::wire::client