// Copyright 2019 The Dawn Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

// Trace events are for tracking application performance and resource usage.
// Macros are provided to track:
//    Begin and end of function calls
//    Counters
//
// Events are issued against categories. Whereas LOG's
// categories are statically defined, TRACE categories are created
// implicitly with a string. For example:
//   TRACE_EVENT_INSTANT0("MY_SUBSYSTEM", "SomeImportantEvent")
//
// Events can be INSTANT, or can be pairs of BEGIN and END in the same scope:
//   TRACE_EVENT_BEGIN0("MY_SUBSYSTEM", "SomethingCostly")
//   doSomethingCostly()
//   TRACE_EVENT_END0("MY_SUBSYSTEM", "SomethingCostly")
// Note: our tools can't always determine the correct BEGIN/END pairs unless
// these are used in the same scope. Use ASYNC_BEGIN/ASYNC_END macros if you need them
// to be in separate scopes.
//
// A common use case is to trace entire function scopes. This
// issues a trace BEGIN and END automatically:
//   void doSomethingCostly() {
//     TRACE_EVENT0("MY_SUBSYSTEM", "doSomethingCostly");
//     ...
//   }
//
// Additional parameters can be associated with an event:
//   void doSomethingCostly2(int howMuch) {
//     TRACE_EVENT1("MY_SUBSYSTEM", "doSomethingCostly",
//         "howMuch", howMuch);
//     ...
//   }
//
// The trace system will automatically add to this information the
// current process id, thread id, and a timestamp in microseconds.
//
// To trace an asynchronous procedure such as an IPC send/receive, use ASYNC_BEGIN and
// ASYNC_END:
//   [single threaded sender code]
//     static int send_count = 0;
//     ++send_count;
//     TRACE_EVENT_ASYNC_BEGIN0("ipc", "message", send_count);
//     Send(new MyMessage(send_count));
//   [receive code]
//     void OnMyMessage(send_count) {
//       TRACE_EVENT_ASYNC_END0("ipc", "message", send_count);
//     }
// The third parameter is a unique ID to match ASYNC_BEGIN/ASYNC_END pairs.
// ASYNC_BEGIN and ASYNC_END can occur on any thread of any traced process. Pointers can
// be used for the ID parameter, and they will be mangled internally so that
// the same pointer on two different processes will not match. For example:
//   class MyTracedClass {
//    public:
//     MyTracedClass() {
//       TRACE_EVENT_ASYNC_BEGIN0("category", "MyTracedClass", this);
//     }
//     ~MyTracedClass() {
//       TRACE_EVENT_ASYNC_END0("category", "MyTracedClass", this);
//     }
//   }
//
// Trace event also supports counters, which is a way to track a quantity
// as it varies over time. Counters are created with the following macro:
//   TRACE_COUNTER1("MY_SUBSYSTEM", "myCounter", g_myCounterValue);
//
// Counters are process-specific. The macro itself can be issued from any
// thread, however.
//
// Sometimes, you want to track two counters at once. You can do this with two
// counter macros:
//   TRACE_COUNTER1("MY_SUBSYSTEM", "myCounter0", g_myCounterValue[0]);
//   TRACE_COUNTER1("MY_SUBSYSTEM", "myCounter1", g_myCounterValue[1]);
// Or you can do it with a combined macro:
//   TRACE_COUNTER2("MY_SUBSYSTEM", "myCounter",
//       "bytesPinned", g_myCounterValue[0],
//       "bytesAllocated", g_myCounterValue[1]);
// This indicates to the tracing UI that these counters should be displayed
// in a single graph, as a summed area chart.
//
// Since counters are in a global namespace, you may want to disembiguate with a
// unique ID, by using the TRACE_COUNTER_ID* variations.
//
// By default, trace collection is compiled in, but turned off at runtime.
// Collecting trace data is the responsibility of the embedding
// application. In Chrome's case, navigating to about:tracing will turn on
// tracing and display data collected across all active processes.
//
//
// Memory scoping note:
// Tracing copies the pointers, not the string content, of the strings passed
// in for category, name, and arg_names. Thus, the following code will
// cause problems:
//     char* str = strdup("impprtantName");
//     TRACE_EVENT_INSTANT0("SUBSYSTEM", str);  // BAD!
//     free(str);                   // Trace system now has dangling pointer
//
// To avoid this issue with the |name| and |arg_name| parameters, use the
// TRACE_EVENT_COPY_XXX overloads of the macros at additional runtime overhead.
// Notes: The category must always be in a long-lived char* (i.e. static const).
//        The |arg_values|, when used, are always deep copied with the _COPY
//        macros.
//
// When are string argument values copied:
// const char* arg_values are only referenced by default:
//     TRACE_EVENT1("category", "name",
//                  "arg1", "literal string is only referenced");
// Use TRACE_STR_COPY to force copying of a const char*:
//     TRACE_EVENT1("category", "name",
//                  "arg1", TRACE_STR_COPY("string will be copied"));
// std::string arg_values are always copied:
//     TRACE_EVENT1("category", "name",
//                  "arg1", std::string("string will be copied"));
//
//
// Thread Safety:
// A thread safe singleton and mutex are used for thread safety. Category
// enabled flags are used to limit the performance impact when the system
// is not enabled.
//
// TRACE_EVENT macros first cache a pointer to a category. The categories are
// statically allocated and safe at all times, even after exit. Fetching a
// category is protected by the TraceLog::lock_. Multiple threads initializing
// the static variable is safe, as they will be serialized by the lock and
// multiple calls will return the same pointer to the category.
//
// Then the category_enabled flag is checked. This is a unsigned char, and
// not intended to be multithread safe. It optimizes access to addTraceEvent
// which is threadsafe internally via TraceLog::lock_. The enabled flag may
// cause some threads to incorrectly call or skip calling addTraceEvent near
// the time of the system being enabled or disabled. This is acceptable as
// we tolerate some data loss while the system is being enabled/disabled and
// because addTraceEvent is threadsafe internally and checks the enabled state
// again under lock.
//
// Without the use of these static category pointers and enabled flags all
// trace points would carry a significant performance cost of aquiring a lock
// and resolving the category.

#ifndef DAWNPLATFORM_TRACING_TRACEEVENT_H_
#define DAWNPLATFORM_TRACING_TRACEEVENT_H_

#include <string>

#include "dawn_platform/tracing/EventTracer.h"

// Records a pair of begin and end events called "name" for the current
// scope, with 0, 1 or 2 associated arguments. If the category is not
// enabled, then this does nothing.
// - category and name strings must have application lifetime (statics or
//   literals). They may not include " chars.
#define TRACE_EVENT0(platform, category, name) \
    INTERNAL_TRACE_EVENT_ADD_SCOPED(platform, category, name, 0)
#define TRACE_EVENT1(platform, category, name, arg1_name, arg1_val) \
    INTERNAL_TRACE_EVENT_ADD_SCOPED(platform, category, name, 0, arg1_name, arg1_val)
#define TRACE_EVENT2(platform, category, name, arg1_name, arg1_val, arg2_name, arg2_val)         \
    INTERNAL_TRACE_EVENT_ADD_SCOPED(platform, category, name, 0, arg1_name, arg1_val, arg2_name, \
                                    arg2_val)

// Records a single event called "name" immediately, with 0, 1 or 2
// associated arguments. If the category is not enabled, then this
// does nothing.
// - category and name strings must have application lifetime (statics or
//   literals). They may not include " chars.
#define TRACE_EVENT_INSTANT0(platform, category, name)                            \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_INSTANT, category, name, \
                             TRACE_EVENT_FLAG_NONE, 0)
#define TRACE_EVENT_INSTANT1(platform, category, name, arg1_name, arg1_val)       \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_INSTANT, category, name, \
                             TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val)
#define TRACE_EVENT_INSTANT2(platform, category, name, arg1_name, arg1_val, arg2_name, arg2_val) \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_INSTANT, category, name,                \
                             TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val, arg2_name, arg2_val)
#define TRACE_EVENT_COPY_INSTANT0(platform, category, name)                       \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_INSTANT, category, name, \
                             TRACE_EVENT_FLAG_COPY, 0)
#define TRACE_EVENT_COPY_INSTANT1(platform, category, name, arg1_name, arg1_val)  \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_INSTANT, category, name, \
                             TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val)
#define TRACE_EVENT_COPY_INSTANT2(platform, category, name, arg1_name, arg1_val, arg2_name, \
                                  arg2_val)                                                 \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_INSTANT, category, name,           \
                             TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val, arg2_name, arg2_val)

// Records a single BEGIN event called "name" immediately, with 0, 1 or 2
// associated arguments. If the category is not enabled, then this
// does nothing.
// - category and name strings must have application lifetime (statics or
//   literals). They may not include " chars.
#define TRACE_EVENT_BEGIN0(platform, category, name)                            \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_BEGIN, category, name, \
                             TRACE_EVENT_FLAG_NONE, 0)
#define TRACE_EVENT_BEGIN1(platform, category, name, arg1_name, arg1_val)       \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_BEGIN, category, name, \
                             TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val)
#define TRACE_EVENT_BEGIN2(platform, category, name, arg1_name, arg1_val, arg2_name, arg2_val) \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_BEGIN, category, name,                \
                             TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val, arg2_name, arg2_val)
#define TRACE_EVENT_COPY_BEGIN0(platform, category, name)                       \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_BEGIN, category, name, \
                             TRACE_EVENT_FLAG_COPY, 0)
#define TRACE_EVENT_COPY_BEGIN1(platform, category, name, arg1_name, arg1_val)  \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_BEGIN, category, name, \
                             TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val)
#define TRACE_EVENT_COPY_BEGIN2(platform, category, name, arg1_name, arg1_val, arg2_name, \
                                arg2_val)                                                 \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_BEGIN, category, name,           \
                             TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val, arg2_name, arg2_val)

// Records a single END event for "name" immediately. If the category
// is not enabled, then this does nothing.
// - category and name strings must have application lifetime (statics or
//   literals). They may not include " chars.
#define TRACE_EVENT_END0(platform, category, name)                            \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_END, category, name, \
                             TRACE_EVENT_FLAG_NONE, 0)
#define TRACE_EVENT_END1(platform, category, name, arg1_name, arg1_val)       \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_END, category, name, \
                             TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val)
#define TRACE_EVENT_END2(platform, category, name, arg1_name, arg1_val, arg2_name, arg2_val) \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_END, category, name,                \
                             TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val, arg2_name, arg2_val)
#define TRACE_EVENT_COPY_END0(platform, category, name) \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_END, category, name, TRACE_EVENT_FLAG_COPY)
#define TRACE_EVENT_COPY_END1(platform, category, name, arg1_name, arg1_val)  \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_END, category, name, \
                             TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val)
#define TRACE_EVENT_COPY_END2(platform, category, name, arg1_name, arg1_val, arg2_name, arg2_val) \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_END, category, name,                     \
                             TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val, arg2_name, arg2_val)

// Records the value of a counter called "name" immediately. Value
// must be representable as a 32 bit integer.
// - category and name strings must have application lifetime (statics or
//   literals). They may not include " chars.
#define TRACE_COUNTER1(platform, category, name, value)                           \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_COUNTER, category, name, \
                             TRACE_EVENT_FLAG_NONE, 0, "value", static_cast<int>(value))
#define TRACE_COPY_COUNTER1(platform, category, name, value)                      \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_COUNTER, category, name, \
                             TRACE_EVENT_FLAG_COPY, 0, "value", static_cast<int>(value))

// Records the values of a multi-parted counter called "name" immediately.
// The UI will treat value1 and value2 as parts of a whole, displaying their
// values as a stacked-bar chart.
// - category and name strings must have application lifetime (statics or
//   literals). They may not include " chars.
#define TRACE_COUNTER2(platform, category, name, value1_name, value1_val, value2_name, value2_val) \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_COUNTER, category, name,                  \
                             TRACE_EVENT_FLAG_NONE, 0, value1_name, static_cast<int>(value1_val),  \
                             value2_name, static_cast<int>(value2_val))
#define TRACE_COPY_COUNTER2(platform, category, name, value1_name, value1_val, value2_name,       \
                            value2_val)                                                           \
    INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_COUNTER, category, name,                 \
                             TRACE_EVENT_FLAG_COPY, 0, value1_name, static_cast<int>(value1_val), \
                             value2_name, static_cast<int>(value2_val))

// Records the value of a counter called "name" immediately. Value
// must be representable as a 32 bit integer.
// - category and name strings must have application lifetime (statics or
//   literals). They may not include " chars.
// - |id| is used to disambiguate counters with the same name. It must either
//   be a pointer or an integer value up to 64 bits. If it's a pointer, the bits
//   will be xored with a hash of the process ID so that the same pointer on
//   two different processes will not collide.
#define TRACE_COUNTER_ID1(platform, category, name, id, value)                                \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_COUNTER, category, name, id, \
                                     TRACE_EVENT_FLAG_NONE, 0, "value", static_cast<int>(value))
#define TRACE_COPY_COUNTER_ID1(platform, category, name, id, value)                           \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_COUNTER, category, name, id, \
                                     TRACE_EVENT_FLAG_COPY, 0, "value", static_cast<int>(value))

// Records the values of a multi-parted counter called "name" immediately.
// The UI will treat value1 and value2 as parts of a whole, displaying their
// values as a stacked-bar chart.
// - category and name strings must have application lifetime (statics or
//   literals). They may not include " chars.
// - |id| is used to disambiguate counters with the same name. It must either
//   be a pointer or an integer value up to 64 bits. If it's a pointer, the bits
//   will be xored with a hash of the process ID so that the same pointer on
//   two different processes will not collide.
#define TRACE_COUNTER_ID2(platform, category, name, id, value1_name, value1_val, value2_name, \
                          value2_val)                                                         \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(                                                         \
        platform, TRACE_EVENT_PHASE_COUNTER, category, name, id, TRACE_EVENT_FLAG_NONE, 0,    \
        value1_name, static_cast<int>(value1_val), value2_name, static_cast<int>(value2_val))
#define TRACE_COPY_COUNTER_ID2(platform, category, name, id, value1_name, value1_val, value2_name, \
                               value2_val)                                                         \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(                                                              \
        platform, TRACE_EVENT_PHASE_COUNTER, category, name, id, TRACE_EVENT_FLAG_COPY, 0,         \
        value1_name, static_cast<int>(value1_val), value2_name, static_cast<int>(value2_val))

// Records a single ASYNC_BEGIN event called "name" immediately, with 0, 1 or 2
// associated arguments. If the category is not enabled, then this
// does nothing.
// - category and name strings must have application lifetime (statics or
//   literals). They may not include " chars.
// - |id| is used to match the ASYNC_BEGIN event with the ASYNC_END event. ASYNC
//   events are considered to match if their category, name and id values all
//   match. |id| must either be a pointer or an integer value up to 64 bits. If
//   it's a pointer, the bits will be xored with a hash of the process ID so
//   that the same pointer on two different processes will not collide.
// An asynchronous operation can consist of multiple phases. The first phase is
// defined by the ASYNC_BEGIN calls. Additional phases can be defined using the
// ASYNC_STEP_BEGIN macros. When the operation completes, call ASYNC_END.
// An async operation can span threads and processes, but all events in that
// operation must use the same |name| and |id|. Each event can have its own
// args.
#define TRACE_EVENT_ASYNC_BEGIN0(platform, category, name, id)                                    \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_BEGIN, category, name, id, \
                                     TRACE_EVENT_FLAG_NONE, 0)
#define TRACE_EVENT_ASYNC_BEGIN1(platform, category, name, id, arg1_name, arg1_val)               \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_BEGIN, category, name, id, \
                                     TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val)
#define TRACE_EVENT_ASYNC_BEGIN2(platform, category, name, id, arg1_name, arg1_val, arg2_name,    \
                                 arg2_val)                                                        \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_BEGIN, category, name, id, \
                                     TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val, arg2_name,    \
                                     arg2_val)
#define TRACE_EVENT_COPY_ASYNC_BEGIN0(platform, category, name, id)                               \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_BEGIN, category, name, id, \
                                     TRACE_EVENT_FLAG_COPY, 0)
#define TRACE_EVENT_COPY_ASYNC_BEGIN1(platform, category, name, id, arg1_name, arg1_val)          \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_BEGIN, category, name, id, \
                                     TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val)
#define TRACE_EVENT_COPY_ASYNC_BEGIN2(platform, category, name, id, arg1_name, arg1_val,          \
                                      arg2_name, arg2_val)                                        \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_BEGIN, category, name, id, \
                                     TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val, arg2_name,    \
                                     arg2_val)

// Records a single ASYNC_STEP event for |step| immediately. If the category
// is not enabled, then this does nothing. The |name| and |id| must match the
// ASYNC_BEGIN event above. The |step| param identifies this step within the
// async event. This should be called at the beginning of the next phase of an
// asynchronous operation.
#define TRACE_EVENT_ASYNC_STEP0(platform, category, name, id, step)                              \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_STEP, category, name, id, \
                                     TRACE_EVENT_FLAG_NONE, 0, "step", step)
#define TRACE_EVENT_ASYNC_STEP1(platform, category, name, id, step, arg1_name, arg1_val)         \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_STEP, category, name, id, \
                                     TRACE_EVENT_FLAG_NONE, 0, "step", step, arg1_name, arg1_val)
#define TRACE_EVENT_COPY_ASYNC_STEP0(platform, category, name, id, step)                         \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_STEP, category, name, id, \
                                     TRACE_EVENT_FLAG_COPY, 0, "step", step)
#define TRACE_EVENT_COPY_ASYNC_STEP1(platform, category, name, id, step, arg1_name, arg1_val)    \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_STEP, category, name, id, \
                                     TRACE_EVENT_FLAG_COPY, 0, "step", step, arg1_name, arg1_val)

// Records a single ASYNC_END event for "name" immediately. If the category
// is not enabled, then this does nothing.
#define TRACE_EVENT_ASYNC_END0(platform, category, name, id)                                    \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_END, category, name, id, \
                                     TRACE_EVENT_FLAG_NONE, 0)
#define TRACE_EVENT_ASYNC_END1(platform, category, name, id, arg1_name, arg1_val)               \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_END, category, name, id, \
                                     TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val)
#define TRACE_EVENT_ASYNC_END2(platform, category, name, id, arg1_name, arg1_val, arg2_name,    \
                               arg2_val)                                                        \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_END, category, name, id, \
                                     TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val, arg2_name,  \
                                     arg2_val)
#define TRACE_EVENT_COPY_ASYNC_END0(platform, category, name, id)                               \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_END, category, name, id, \
                                     TRACE_EVENT_FLAG_COPY, 0)
#define TRACE_EVENT_COPY_ASYNC_END1(platform, category, name, id, arg1_name, arg1_val)          \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_END, category, name, id, \
                                     TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val)
#define TRACE_EVENT_COPY_ASYNC_END2(platform, category, name, id, arg1_name, arg1_val, arg2_name, \
                                    arg2_val)                                                     \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_END, category, name, id,   \
                                     TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val, arg2_name,    \
                                     arg2_val)

// NESTABLE_ASYNC_* APIs are used to describe an async operation, which can
// be nested within a NESTABLE_ASYNC event and/or have inner NESTABLE_ASYNC
// events.
// - category and name strings must have application lifetime (statics or
//   literals). They may not include " chars.
// - A pair of NESTABLE_ASYNC_BEGIN event and NESTABLE_ASYNC_END event is
//   considered as a match if their category_group, name and id all match.
// - |id| must either be a pointer or an integer value up to 64 bits.
//   If it's a pointer, the bits will be xored with a hash of the process ID so
//   that the same pointer on two different processes will not collide.
// - |id| is used to match a child NESTABLE_ASYNC event with its parent
//   NESTABLE_ASYNC event. Therefore, events in the same nested event tree must
//   be logged using the same id and category_group.
//
// Unmatched NESTABLE_ASYNC_END event will be parsed as an event that starts
// at the first NESTABLE_ASYNC event of that id, and unmatched
// NESTABLE_ASYNC_BEGIN event will be parsed as an event that ends at the last
// NESTABLE_ASYNC event of that id. Corresponding warning messages for
// unmatched events will be shown in the analysis view.

// Records a single NESTABLE_ASYNC_BEGIN event called "name" immediately, with
// 0, 1 or 2 associated arguments. If the category is not enabled, then this
// does nothing.
#define TRACE_EVENT_NESTABLE_ASYNC_BEGIN0(platform, category_group, name, id)          \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, \
                                     category_group, name, id, TRACE_EVENT_FLAG_NONE, 0)
#define TRACE_EVENT_NESTABLE_ASYNC_BEGIN1(platform, category_group, name, id, arg1_name, arg1_val) \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN,             \
                                     category_group, name, id, TRACE_EVENT_FLAG_NONE, 0,           \
                                     arg1_name, arg1_val)
#define TRACE_EVENT_NESTABLE_ASYNC_BEGIN2(platform, category_group, name, id, arg1_name, arg1_val, \
                                          arg2_name, arg2_val)                                     \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN,             \
                                     category_group, name, id, TRACE_EVENT_FLAG_NONE, 0,           \
                                     arg1_name, arg1_val, arg2_name, arg2_val)
// Records a single NESTABLE_ASYNC_END event called "name" immediately, with 0
// or 2 associated arguments. If the category is not enabled, then this does
// nothing.
#define TRACE_EVENT_NESTABLE_ASYNC_END0(platform, category_group, name, id)          \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, \
                                     category_group, name, id, TRACE_EVENT_FLAG_NONE, 0)
// Records a single NESTABLE_ASYNC_END event called "name" immediately, with 1
// associated argument. If the category is not enabled, then this does nothing.
#define TRACE_EVENT_NESTABLE_ASYNC_END1(platform, category_group, name, id, arg1_name, arg1_val) \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_END,             \
                                     category_group, name, id, TRACE_EVENT_FLAG_NONE, 0,         \
                                     arg1_name, arg1_val)
#define TRACE_EVENT_NESTABLE_ASYNC_END2(platform, category_group, name, id, arg1_name, arg1_val, \
                                        arg2_name, arg2_val)                                     \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_END,             \
                                     category_group, name, id, TRACE_EVENT_FLAG_NONE, 0,         \
                                     arg1_name, arg1_val, arg2_name, arg2_val)

// Records a single NESTABLE_ASYNC_INSTANT event called "name" immediately,
// with none, one or two associated argument. If the category is not enabled,
// then this does nothing.
#define TRACE_EVENT_NESTABLE_ASYNC_INSTANT0(platform, category_group, name, id)          \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_INSTANT, \
                                     category_group, name, id, TRACE_EVENT_FLAG_NONE, 0)

#define TRACE_EVENT_NESTABLE_ASYNC_INSTANT1(platform, category_group, name, id, arg1_name, \
                                            arg1_val)                                      \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_INSTANT,   \
                                     category_group, name, id, TRACE_EVENT_FLAG_NONE, 0,   \
                                     arg1_name, arg1_val)

#define TRACE_EVENT_NESTABLE_ASYNC_INSTANT2(platform, category_group, name, id, arg1_name, \
                                            arg1_val, arg2_name, arg2_val)                 \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_INSTANT,   \
                                     category_group, name, id, TRACE_EVENT_FLAG_NONE, 0,   \
                                     arg1_name, arg1_val, arg2_name, arg2_val)

#define TRACE_EVENT_COPY_NESTABLE_ASYNC_BEGIN_WITH_TTS2(platform, category_group, name, id,       \
                                                        arg1_name, arg1_val, arg2_name, arg2_val) \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN,            \
                                     category_group, name, id,                                    \
                                     TRACE_EVENT_FLAG_ASYNC_TTS | TRACE_EVENT_FLAG_COPY, 0,       \
                                     arg1_name, arg1_val, arg2_name, arg2_val)
#define TRACE_EVENT_COPY_NESTABLE_ASYNC_END_WITH_TTS2(platform, category_group, name, id,       \
                                                      arg1_name, arg1_val, arg2_name, arg2_val) \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_END,            \
                                     category_group, name, id,                                  \
                                     TRACE_EVENT_FLAG_ASYNC_TTS | TRACE_EVENT_FLAG_COPY, 0,     \
                                     arg1_name, arg1_val, arg2_name, arg2_val)

// Similar to TRACE_EVENT_NESTABLE_ASYNC_{BEGIN,END}x but with a custom
// |timestamp| provided.
#define TRACE_EVENT_NESTABLE_ASYNC_BEGIN_WITH_TIMESTAMP0(platform, category_group, name, id, \
                                                         timestamp)                          \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP(                                      \
        platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, category_group, name, id,          \
        TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE, 0)
#define TRACE_EVENT_NESTABLE_ASYNC_END_WITH_TIMESTAMP0(platform, category_group, name, id, \
                                                       timestamp)                          \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP(                                    \
        platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, category_group, name, id,          \
        TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE, 0)
#define TRACE_EVENT_NESTABLE_ASYNC_END_WITH_TIMESTAMP1(platform, category_group, name, id, \
                                                       timestamp, arg1_name, arg1_val)     \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP(                                    \
        platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, category_group, name, id,          \
        TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE, 0, arg1_name, \
        arg1_val)
#define TRACE_EVENT_NESTABLE_ASYNC_INSTANT_WITH_TIMESTAMP0(platform, category_group, name, id, \
                                                           timestamp)                          \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP(                                        \
        platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_INSTANT, category_group, name, id,          \
        TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE, 0)
#define TRACE_EVENT_COPY_NESTABLE_ASYNC_BEGIN_WITH_TIMESTAMP0(platform, category_group, name, id, \
                                                              timestamp)                          \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP(                                           \
        platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, category_group, name, id,               \
        TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_COPY, 0)
#define TRACE_EVENT_COPY_NESTABLE_ASYNC_END_WITH_TIMESTAMP0(platform, category_group, name, id, \
                                                            timestamp)                          \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP(                                         \
        platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, category_group, name, id,               \
        TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_COPY, 0)

// Records a single FLOW_BEGIN event called "name" immediately, with 0, 1 or 2
// associated arguments. If the category is not enabled, then this
// does nothing.
// - category and name strings must have application lifetime (statics or
//   literals). They may not include " chars.
// - |id| is used to match the FLOW_BEGIN event with the FLOW_END event. FLOW
//   events are considered to match if their category_group, name and id values
//   all match. |id| must either be a pointer or an integer value up to 64 bits.
//   If it's a pointer, the bits will be xored with a hash of the process ID so
//   that the same pointer on two different processes will not collide.
// FLOW events are different from ASYNC events in how they are drawn by the
// tracing UI. A FLOW defines asynchronous data flow, such as posting a task
// (FLOW_BEGIN) and later executing that task (FLOW_END). Expect FLOWs to be
// drawn as lines or arrows from FLOW_BEGIN scopes to FLOW_END scopes. Similar
// to ASYNC, a FLOW can consist of multiple phases. The first phase is defined
// by the FLOW_BEGIN calls. Additional phases can be defined using the FLOW_STEP
// macros. When the operation completes, call FLOW_END. An async operation can
// span threads and processes, but all events in that operation must use the
// same |name| and |id|. Each event can have its own args.
#define TRACE_EVENT_FLOW_BEGIN0(platform, category_group, name, id)                                \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_BEGIN, category_group, name, \
                                     id, TRACE_EVENT_FLAG_NONE, 0)
#define TRACE_EVENT_FLOW_BEGIN1(platform, category_group, name, id, arg1_name, arg1_val)           \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_BEGIN, category_group, name, \
                                     id, TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val)
#define TRACE_EVENT_FLOW_BEGIN2(platform, category_group, name, id, arg1_name, arg1_val,           \
                                arg2_name, arg2_val)                                               \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_BEGIN, category_group, name, \
                                     id, TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val, arg2_name, \
                                     arg2_val)
#define TRACE_EVENT_COPY_FLOW_BEGIN0(platform, category_group, name, id)                           \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_BEGIN, category_group, name, \
                                     id, TRACE_EVENT_FLAG_COPY, 0)
#define TRACE_EVENT_COPY_FLOW_BEGIN1(platform, category_group, name, id, arg1_name, arg1_val)      \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_BEGIN, category_group, name, \
                                     id, TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val)
#define TRACE_EVENT_COPY_FLOW_BEGIN2(platform, category_group, name, id, arg1_name, arg1_val,      \
                                     arg2_name, arg2_val)                                          \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_BEGIN, category_group, name, \
                                     id, TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val, arg2_name, \
                                     arg2_val)

// Records a single FLOW_STEP event for |step| immediately. If the category
// is not enabled, then this does nothing. The |name| and |id| must match the
// FLOW_BEGIN event above. The |step| param identifies this step within the
// async event. This should be called at the beginning of the next phase of an
// asynchronous operation.
#define TRACE_EVENT_FLOW_STEP0(platform, category_group, name, id, step)                          \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_STEP, category_group, name, \
                                     id, TRACE_EVENT_FLAG_NONE, 0, "step", step)
#define TRACE_EVENT_FLOW_STEP1(platform, category_group, name, id, step, arg1_name, arg1_val)     \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_STEP, category_group, name, \
                                     id, TRACE_EVENT_FLAG_NONE, 0, "step", step, arg1_name,       \
                                     arg1_val)
#define TRACE_EVENT_COPY_FLOW_STEP0(platform, category_group, name, id, step)                     \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_STEP, category_group, name, \
                                     id, TRACE_EVENT_FLAG_COPY, 0, "step", step)
#define TRACE_EVENT_COPY_FLOW_STEP1(platform, category_group, name, id, step, arg1_name, arg1_val) \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_STEP, category_group, name,  \
                                     id, TRACE_EVENT_FLAG_COPY, 0, "step", step, arg1_name,        \
                                     arg1_val)

// Records a single FLOW_END event for "name" immediately. If the category
// is not enabled, then this does nothing.
#define TRACE_EVENT_FLOW_END0(platform, category_group, name, id)                                \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_END, category_group, name, \
                                     id, TRACE_EVENT_FLAG_NONE, 0)
#define TRACE_EVENT_FLOW_END_BIND_TO_ENCLOSING0(platform, category_group, name, id)              \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_END, category_group, name, \
                                     id, TRACE_EVENT_FLAG_BIND_TO_ENCLOSING, 0)
#define TRACE_EVENT_FLOW_END1(platform, category_group, name, id, arg1_name, arg1_val)           \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_END, category_group, name, \
                                     id, TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val)
#define TRACE_EVENT_FLOW_END2(platform, category_group, name, id, arg1_name, arg1_val, arg2_name,  \
                              arg2_val)                                                            \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_END, category_group, name,   \
                                     id, TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val, arg2_name, \
                                     arg2_val)
#define TRACE_EVENT_COPY_FLOW_END0(platform, category_group, name, id)                           \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_END, category_group, name, \
                                     id, TRACE_EVENT_FLAG_COPY, 0)
#define TRACE_EVENT_COPY_FLOW_END1(platform, category_group, name, id, arg1_name, arg1_val)      \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_END, category_group, name, \
                                     id, TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val)
#define TRACE_EVENT_COPY_FLOW_END2(platform, category_group, name, id, arg1_name, arg1_val,        \
                                   arg2_name, arg2_val)                                            \
    INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_END, category_group, name,   \
                                     id, TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val, arg2_name, \
                                     arg2_val)

// Creates a scope of a sampling state with the given category and name (both must
// be constant strings). These states are intended for a sampling profiler.
// Implementation note: we store category and name together because we don't
// want the inconsistency/expense of storing two pointers.
// |thread_bucket| is [0..2] and is used to statically isolate samples in one
// thread from others.
//
// {  // The sampling state is set within this scope.
//    TRACE_EVENT_SAMPLING_STATE_SCOPE_FOR_BUCKET(0, "category", "name");
//    ...;
// }
#define TRACE_EVENT_SCOPED_SAMPLING_STATE_FOR_BUCKET(bucket_number, category, name) \
    TraceEvent::SamplingStateScope<bucket_number> traceEventSamplingScope(category "\0" name);

// Returns a current sampling state of the given bucket.
// The format of the returned string is "category\0name".
#define TRACE_EVENT_GET_SAMPLING_STATE_FOR_BUCKET(bucket_number) \
    TraceEvent::SamplingStateScope<bucket_number>::current()

// Sets a current sampling state of the given bucket.
// |category| and |name| have to be constant strings.
#define TRACE_EVENT_SET_SAMPLING_STATE_FOR_BUCKET(bucket_number, category, name) \
    TraceEvent::SamplingStateScope<bucket_number>::set(category "\0" name)

// Sets a current sampling state of the given bucket.
// |categoryAndName| doesn't need to be a constant string.
// The format of the string is "category\0name".
#define TRACE_EVENT_SET_NONCONST_SAMPLING_STATE_FOR_BUCKET(bucket_number, categoryAndName) \
    TraceEvent::SamplingStateScope<bucket_number>::set(categoryAndName)

// Syntactic sugars for the sampling tracing in the main thread.
#define TRACE_EVENT_SCOPED_SAMPLING_STATE(category, name) \
    TRACE_EVENT_SCOPED_SAMPLING_STATE_FOR_BUCKET(0, category, name)
#define TRACE_EVENT_GET_SAMPLING_STATE() TRACE_EVENT_GET_SAMPLING_STATE_FOR_BUCKET(0)
#define TRACE_EVENT_SET_SAMPLING_STATE(category, name) \
    TRACE_EVENT_SET_SAMPLING_STATE_FOR_BUCKET(0, category, name)
#define TRACE_EVENT_SET_NONCONST_SAMPLING_STATE(categoryAndName) \
    TRACE_EVENT_SET_NONCONST_SAMPLING_STATE_FOR_BUCKET(0, categoryAndName)

////////////////////////////////////////////////////////////////////////////////
// Implementation specific tracing API definitions.

// Get a pointer to the enabled state of the given trace category. Only
// long-lived literal strings should be given as the category name. The returned
// pointer can be held permanently in a local static for example. If the
// unsigned char is non-zero, tracing is enabled. If tracing is enabled,
// TRACE_EVENT_API_ADD_TRACE_EVENT can be called. It's OK if tracing is disabled
// between the load of the tracing state and the call to
// TRACE_EVENT_API_ADD_TRACE_EVENT, because this flag only provides an early out
// for best performance when tracing is disabled.
// const unsigned char*
//     TRACE_EVENT_API_GET_CATEGORY_ENABLED(const char* category_name)
#define TRACE_EVENT_API_GET_CATEGORY_ENABLED dawn::platform::tracing::GetTraceCategoryEnabledFlag

// Add a trace event to the platform tracing system.
// void TRACE_EVENT_API_ADD_TRACE_EVENT(
//                    char phase,
//                    const unsigned char* category_enabled,
//                    const char* name,
//                    unsigned long long id,
//                    int num_args,
//                    const char** arg_names,
//                    const unsigned char* arg_types,
//                    const unsigned long long* arg_values,
//                    unsigned char flags)
#define TRACE_EVENT_API_ADD_TRACE_EVENT dawn::platform::tracing::AddTraceEvent

////////////////////////////////////////////////////////////////////////////////

// Implementation detail: trace event macros create temporary variables
// to keep instrumentation overhead low. These macros give each temporary
// variable a unique name based on the line number to prevent name collissions.
#define INTERNAL_TRACE_EVENT_UID3(a, b) trace_event_unique_##a##b
#define INTERNAL_TRACE_EVENT_UID2(a, b) INTERNAL_TRACE_EVENT_UID3(a, b)
#define INTERNALTRACEEVENTUID(name_prefix) INTERNAL_TRACE_EVENT_UID2(name_prefix, __LINE__)

// Implementation detail: internal macro to create static category.
#define INTERNAL_TRACE_EVENT_GET_CATEGORY_INFO(platform, category)    \
    static const unsigned char* INTERNALTRACEEVENTUID(catstatic) = 0; \
    if (!INTERNALTRACEEVENTUID(catstatic))                            \
        INTERNALTRACEEVENTUID(catstatic) = TRACE_EVENT_API_GET_CATEGORY_ENABLED(platform, category);

// Implementation detail: internal macro to create static category and add
// event if the category is enabled.
#define INTERNAL_TRACE_EVENT_ADD(platformObj, phase, category, name, flags, ...)          \
    do {                                                                                  \
        INTERNAL_TRACE_EVENT_GET_CATEGORY_INFO(platformObj,                               \
                                               ::dawn::platform::TraceCategory::category) \
        if (*INTERNALTRACEEVENTUID(catstatic)) {                                          \
            dawn::platform::TraceEvent::addTraceEvent(                                    \
                platformObj, phase, INTERNALTRACEEVENTUID(catstatic), name,               \
                dawn::platform::TraceEvent::noEventId, flags, __VA_ARGS__);               \
        }                                                                                 \
    } while (0)

// Implementation detail: internal macro to create static category and add begin
// event if the category is enabled. Also adds the end event when the scope
// ends.
#define INTERNAL_TRACE_EVENT_ADD_SCOPED(platformObj, category, name, ...)                          \
    INTERNAL_TRACE_EVENT_GET_CATEGORY_INFO(platformObj, ::dawn::platform::TraceCategory::category) \
    dawn::platform::TraceEvent::TraceEndOnScopeClose INTERNALTRACEEVENTUID(profileScope);          \
    do {                                                                                           \
        if (*INTERNALTRACEEVENTUID(catstatic)) {                                                   \
            dawn::platform::TraceEvent::addTraceEvent(                                             \
                platformObj, TRACE_EVENT_PHASE_BEGIN, INTERNALTRACEEVENTUID(catstatic), name,      \
                dawn::platform::TraceEvent::noEventId, TRACE_EVENT_FLAG_NONE, __VA_ARGS__);        \
            INTERNALTRACEEVENTUID(profileScope)                                                    \
                .initialize(platformObj, INTERNALTRACEEVENTUID(catstatic), name);                  \
        }                                                                                          \
    } while (0)

// Implementation detail: internal macro to create static category and add
// event if the category is enabled.
#define INTERNAL_TRACE_EVENT_ADD_WITH_ID(platformObj, phase, category, name, id, flags, ...) \
    do {                                                                                     \
        INTERNAL_TRACE_EVENT_GET_CATEGORY_INFO(platformObj,                                  \
                                               ::dawn::platform::TraceCategory::category)    \
        if (*INTERNALTRACEEVENTUID(catstatic)) {                                             \
            unsigned char traceEventFlags = flags | TRACE_EVENT_FLAG_HAS_ID;                 \
            dawn::platform::TraceEvent::TraceID traceEventTraceID(id, &traceEventFlags);     \
            dawn::platform::TraceEvent::addTraceEvent(                                       \
                platformObj, phase, INTERNALTRACEEVENTUID(catstatic), name,                  \
                traceEventTraceID.data(), traceEventFlags, __VA_ARGS__);                     \
        }                                                                                    \
    } while (0)

// Notes regarding the following definitions:
// New values can be added and propagated to third party libraries, but existing
// definitions must never be changed, because third party libraries may use old
// definitions.

// Phase indicates the nature of an event entry. E.g. part of a begin/end pair.
#define TRACE_EVENT_PHASE_BEGIN ('B')
#define TRACE_EVENT_PHASE_END ('E')
#define TRACE_EVENT_PHASE_INSTANT ('I')
#define TRACE_EVENT_PHASE_ASYNC_BEGIN ('S')
#define TRACE_EVENT_PHASE_ASYNC_STEP ('T')
#define TRACE_EVENT_PHASE_ASYNC_END ('F')
#define TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN ('b')
#define TRACE_EVENT_PHASE_NESTABLE_ASYNC_END ('e')
#define TRACE_EVENT_PHASE_NESTABLE_ASYNC_INSTANT ('n')
#define TRACE_EVENT_PHASE_FLOW_BEGIN ('s')
#define TRACE_EVENT_PHASE_FLOW_STEP ('t')
#define TRACE_EVENT_PHASE_FLOW_END ('f')
#define TRACE_EVENT_PHASE_METADATA ('M')
#define TRACE_EVENT_PHASE_COUNTER ('C')
#define TRACE_EVENT_PHASE_SAMPLE ('P')

// Flags for changing the behavior of TRACE_EVENT_API_ADD_TRACE_EVENT.
#define TRACE_EVENT_FLAG_NONE (static_cast<unsigned char>(0))
#define TRACE_EVENT_FLAG_COPY (static_cast<unsigned char>(1 << 0))
#define TRACE_EVENT_FLAG_HAS_ID (static_cast<unsigned char>(1 << 1))
#define TRACE_EVENT_FLAG_MANGLE_ID (static_cast<unsigned char>(1 << 2))

// Type values for identifying types in the TraceValue union.
#define TRACE_VALUE_TYPE_BOOL (static_cast<unsigned char>(1))
#define TRACE_VALUE_TYPE_UINT (static_cast<unsigned char>(2))
#define TRACE_VALUE_TYPE_INT (static_cast<unsigned char>(3))
#define TRACE_VALUE_TYPE_DOUBLE (static_cast<unsigned char>(4))
#define TRACE_VALUE_TYPE_POINTER (static_cast<unsigned char>(5))
#define TRACE_VALUE_TYPE_STRING (static_cast<unsigned char>(6))
#define TRACE_VALUE_TYPE_COPY_STRING (static_cast<unsigned char>(7))

namespace dawn::platform::TraceEvent {

    // Specify these values when the corresponding argument of addTraceEvent is not
    // used.
    const int zeroNumArgs = 0;
    const unsigned long long noEventId = 0;

    // TraceID encapsulates an ID that can either be an integer or pointer. Pointers
    // are mangled with the Process ID so that they are unlikely to collide when the
    // same pointer is used on different processes.
    class TraceID {
      public:
        explicit TraceID(const void* id, unsigned char* flags)
            : m_data(static_cast<unsigned long long>(reinterpret_cast<uintptr_t>(id))) {
            *flags |= TRACE_EVENT_FLAG_MANGLE_ID;
        }
        explicit TraceID(unsigned long long id, unsigned char* flags) : m_data(id) {
            (void)flags;
        }
        explicit TraceID(unsigned long id, unsigned char* flags) : m_data(id) {
            (void)flags;
        }
        explicit TraceID(unsigned int id, unsigned char* flags) : m_data(id) {
            (void)flags;
        }
        explicit TraceID(unsigned short id, unsigned char* flags) : m_data(id) {
            (void)flags;
        }
        explicit TraceID(unsigned char id, unsigned char* flags) : m_data(id) {
            (void)flags;
        }
        explicit TraceID(long long id, unsigned char* flags)
            : m_data(static_cast<unsigned long long>(id)) {
            (void)flags;
        }
        explicit TraceID(long id, unsigned char* flags)
            : m_data(static_cast<unsigned long long>(id)) {
            (void)flags;
        }
        explicit TraceID(int id, unsigned char* flags)
            : m_data(static_cast<unsigned long long>(id)) {
            (void)flags;
        }
        explicit TraceID(short id, unsigned char* flags)
            : m_data(static_cast<unsigned long long>(id)) {
            (void)flags;
        }
        explicit TraceID(signed char id, unsigned char* flags)
            : m_data(static_cast<unsigned long long>(id)) {
            (void)flags;
        }

        unsigned long long data() const {
            return m_data;
        }

      private:
        unsigned long long m_data;
    };

    // Simple union to store various types as unsigned long long.
    union TraceValueUnion {
        bool m_bool;
        unsigned long long m_uint;
        long long m_int;
        double m_double;
        const void* m_pointer;
        const char* m_string;
    };

    // Simple container for const char* that should be copied instead of retained.
    class TraceStringWithCopy {
      public:
        explicit TraceStringWithCopy(const char* str) : m_str(str) {
        }
        operator const char*() const {
            return m_str;
        }

      private:
        const char* m_str;
    };

// Define setTraceValue for each allowed type. It stores the type and
// value in the return arguments. This allows this API to avoid declaring any
// structures so that it is portable to third_party libraries.
#define INTERNAL_DECLARE_SET_TRACE_VALUE(actual_type, union_member, value_type_id)            \
    static inline void setTraceValue(actual_type arg, unsigned char* type, uint64_t* value) { \
        TraceValueUnion typeValue;                                                            \
        typeValue.union_member = arg;                                                         \
        *type = value_type_id;                                                                \
        *value = typeValue.m_uint;                                                            \
    }
// Simpler form for int types that can be safely casted.
#define INTERNAL_DECLARE_SET_TRACE_VALUE_INT(actual_type, value_type_id)                      \
    static inline void setTraceValue(actual_type arg, unsigned char* type, uint64_t* value) { \
        *type = value_type_id;                                                                \
        *value = static_cast<unsigned long long>(arg);                                        \
    }

        INTERNAL_DECLARE_SET_TRACE_VALUE_INT(unsigned long long, TRACE_VALUE_TYPE_UINT)
        INTERNAL_DECLARE_SET_TRACE_VALUE_INT(unsigned int, TRACE_VALUE_TYPE_UINT)
        INTERNAL_DECLARE_SET_TRACE_VALUE_INT(unsigned short, TRACE_VALUE_TYPE_UINT)
        INTERNAL_DECLARE_SET_TRACE_VALUE_INT(unsigned char, TRACE_VALUE_TYPE_UINT)
        INTERNAL_DECLARE_SET_TRACE_VALUE_INT(long long, TRACE_VALUE_TYPE_INT)
        INTERNAL_DECLARE_SET_TRACE_VALUE_INT(int, TRACE_VALUE_TYPE_INT)
        INTERNAL_DECLARE_SET_TRACE_VALUE_INT(short, TRACE_VALUE_TYPE_INT)
        INTERNAL_DECLARE_SET_TRACE_VALUE_INT(signed char, TRACE_VALUE_TYPE_INT)
        INTERNAL_DECLARE_SET_TRACE_VALUE(bool, m_bool, TRACE_VALUE_TYPE_BOOL)
        INTERNAL_DECLARE_SET_TRACE_VALUE(double, m_double, TRACE_VALUE_TYPE_DOUBLE)
        INTERNAL_DECLARE_SET_TRACE_VALUE(const void*, m_pointer, TRACE_VALUE_TYPE_POINTER)
        INTERNAL_DECLARE_SET_TRACE_VALUE(const char*, m_string, TRACE_VALUE_TYPE_STRING)
        INTERNAL_DECLARE_SET_TRACE_VALUE(const TraceStringWithCopy&,
                                         m_string,
                                         TRACE_VALUE_TYPE_COPY_STRING)

#undef INTERNAL_DECLARE_SET_TRACE_VALUE
#undef INTERNAL_DECLARE_SET_TRACE_VALUE_INT

        static inline void setTraceValue(const std::string& arg,
                                         unsigned char* type,
                                         uint64_t* value) {
            TraceValueUnion typeValue;
            typeValue.m_string = arg.data();
            *type = TRACE_VALUE_TYPE_COPY_STRING;
            *value = typeValue.m_uint;
        }

        // These addTraceEvent template functions are defined here instead of in the
        // macro, because the arg values could be temporary string objects. In order to
        // store pointers to the internal c_str and pass through to the tracing API, the
        // arg values must live throughout these procedures.

        static inline dawn::platform::tracing::TraceEventHandle addTraceEvent(
            dawn::platform::Platform* platform,
            char phase,
            const unsigned char* categoryEnabled,
            const char* name,
            unsigned long long id,
            unsigned char flags,
            int /*unused, helps avoid empty __VA_ARGS__*/) {
            return TRACE_EVENT_API_ADD_TRACE_EVENT(platform, phase, categoryEnabled, name, id,
                                                   zeroNumArgs, 0, 0, 0, flags);
        }

        template <class ARG1_TYPE>
        static inline dawn::platform::tracing::TraceEventHandle addTraceEvent(
            dawn::platform::Platform* platform,
            char phase,
            const unsigned char* categoryEnabled,
            const char* name,
            unsigned long long id,
            unsigned char flags,
            int /*unused, helps avoid empty __VA_ARGS__*/,
            const char* arg1Name,
            const ARG1_TYPE& arg1Val) {
            const int numArgs = 1;
            unsigned char argTypes[1];
            uint64_t argValues[1];
            setTraceValue(arg1Val, &argTypes[0], &argValues[0]);
            return TRACE_EVENT_API_ADD_TRACE_EVENT(platform, phase, categoryEnabled, name, id,
                                                   numArgs, &arg1Name, argTypes, argValues, flags);
        }

        template <class ARG1_TYPE, class ARG2_TYPE>
        static inline dawn::platform::tracing::TraceEventHandle addTraceEvent(
            dawn::platform::Platform* platform,
            char phase,
            const unsigned char* categoryEnabled,
            const char* name,
            unsigned long long id,
            unsigned char flags,
            int /*unused, helps avoid empty __VA_ARGS__*/,
            const char* arg1Name,
            const ARG1_TYPE& arg1Val,
            const char* arg2Name,
            const ARG2_TYPE& arg2Val) {
            const int numArgs = 2;
            const char* argNames[2] = {arg1Name, arg2Name};
            unsigned char argTypes[2];
            uint64_t argValues[2];
            setTraceValue(arg1Val, &argTypes[0], &argValues[0]);
            setTraceValue(arg2Val, &argTypes[1], &argValues[1]);
            return TRACE_EVENT_API_ADD_TRACE_EVENT(platform, phase, categoryEnabled, name, id,
                                                   numArgs, argNames, argTypes, argValues, flags);
        }

        // Used by TRACE_EVENTx macro. Do not use directly.
        class TraceEndOnScopeClose {
          public:
            // Note: members of m_data intentionally left uninitialized. See initialize.
            TraceEndOnScopeClose() : m_pdata(0) {
            }
            ~TraceEndOnScopeClose() {
                if (m_pdata)
                    addEventIfEnabled();
            }

            void initialize(dawn::platform::Platform* platform,
                            const unsigned char* categoryEnabled,
                            const char* name) {
                m_data.platform = platform;
                m_data.categoryEnabled = categoryEnabled;
                m_data.name = name;
                m_pdata = &m_data;
            }

          private:
            // Add the end event if the category is still enabled.
            void addEventIfEnabled() {
                // Only called when m_pdata is non-null.
                if (*m_pdata->categoryEnabled) {
                    TRACE_EVENT_API_ADD_TRACE_EVENT(
                        m_pdata->platform, TRACE_EVENT_PHASE_END, m_pdata->categoryEnabled,
                        m_pdata->name, noEventId, zeroNumArgs, 0, 0, 0, TRACE_EVENT_FLAG_NONE);
                }
            }

            // This Data struct workaround is to avoid initializing all the members
            // in Data during construction of this object, since this object is always
            // constructed, even when tracing is disabled. If the members of Data were
            // members of this class instead, compiler warnings occur about potential
            // uninitialized accesses.
            struct Data {
                dawn::platform::Platform* platform;
                const unsigned char* categoryEnabled;
                const char* name;
            };
            Data* m_pdata;
            Data m_data;
        };

}  // namespace dawn::platform::TraceEvent

#endif  // DAWNPLATFORM_TRACING_TRACEEVENT_H_