// Copyright 2017 The Dawn Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#include "dawn/native/vulkan/CommandBufferVk.h"

#include <algorithm>
#include <vector>

#include "dawn/native/BindGroupTracker.h"
#include "dawn/native/CommandEncoder.h"
#include "dawn/native/CommandValidation.h"
#include "dawn/native/Commands.h"
#include "dawn/native/DynamicUploader.h"
#include "dawn/native/EnumMaskIterator.h"
#include "dawn/native/RenderBundle.h"
#include "dawn/native/vulkan/BindGroupVk.h"
#include "dawn/native/vulkan/BufferVk.h"
#include "dawn/native/vulkan/CommandRecordingContext.h"
#include "dawn/native/vulkan/ComputePipelineVk.h"
#include "dawn/native/vulkan/DeviceVk.h"
#include "dawn/native/vulkan/FencedDeleter.h"
#include "dawn/native/vulkan/PipelineLayoutVk.h"
#include "dawn/native/vulkan/QuerySetVk.h"
#include "dawn/native/vulkan/RenderPassCache.h"
#include "dawn/native/vulkan/RenderPipelineVk.h"
#include "dawn/native/vulkan/StagingBufferVk.h"
#include "dawn/native/vulkan/TextureVk.h"
#include "dawn/native/vulkan/UtilsVulkan.h"
#include "dawn/native/vulkan/VulkanError.h"

namespace dawn::native::vulkan {

namespace {

VkIndexType VulkanIndexType(wgpu::IndexFormat format) {
    switch (format) {
        case wgpu::IndexFormat::Uint16:
            return VK_INDEX_TYPE_UINT16;
        case wgpu::IndexFormat::Uint32:
            return VK_INDEX_TYPE_UINT32;
        case wgpu::IndexFormat::Undefined:
            break;
    }
    UNREACHABLE();
}

bool HasSameTextureCopyExtent(const TextureCopy& srcCopy,
                              const TextureCopy& dstCopy,
                              const Extent3D& copySize) {
    Extent3D imageExtentSrc = ComputeTextureCopyExtent(srcCopy, copySize);
    Extent3D imageExtentDst = ComputeTextureCopyExtent(dstCopy, copySize);
    return imageExtentSrc.width == imageExtentDst.width &&
           imageExtentSrc.height == imageExtentDst.height &&
           imageExtentSrc.depthOrArrayLayers == imageExtentDst.depthOrArrayLayers;
}

VkImageCopy ComputeImageCopyRegion(const TextureCopy& srcCopy,
                                   const TextureCopy& dstCopy,
                                   const Extent3D& copySize,
                                   Aspect aspect) {
    const Texture* srcTexture = ToBackend(srcCopy.texture.Get());
    const Texture* dstTexture = ToBackend(dstCopy.texture.Get());

    VkImageCopy region;
    region.srcSubresource.aspectMask = VulkanAspectMask(aspect);
    region.srcSubresource.mipLevel = srcCopy.mipLevel;
    region.dstSubresource.aspectMask = VulkanAspectMask(aspect);
    region.dstSubresource.mipLevel = dstCopy.mipLevel;

    bool has3DTextureInCopy = false;

    region.srcOffset.x = srcCopy.origin.x;
    region.srcOffset.y = srcCopy.origin.y;
    switch (srcTexture->GetDimension()) {
        case wgpu::TextureDimension::e1D:
            region.srcSubresource.baseArrayLayer = 0;
            region.srcSubresource.layerCount = 1;
            region.srcOffset.z = 0;
            break;
        case wgpu::TextureDimension::e2D:
            region.srcSubresource.baseArrayLayer = srcCopy.origin.z;
            region.srcSubresource.layerCount = copySize.depthOrArrayLayers;
            region.srcOffset.z = 0;
            break;
        case wgpu::TextureDimension::e3D:
            has3DTextureInCopy = true;
            region.srcSubresource.baseArrayLayer = 0;
            region.srcSubresource.layerCount = 1;
            region.srcOffset.z = srcCopy.origin.z;
            break;
    }

    region.dstOffset.x = dstCopy.origin.x;
    region.dstOffset.y = dstCopy.origin.y;
    switch (dstTexture->GetDimension()) {
        case wgpu::TextureDimension::e1D:
            region.dstSubresource.baseArrayLayer = 0;
            region.dstSubresource.layerCount = 1;
            region.dstOffset.z = 0;
            break;
        case wgpu::TextureDimension::e2D:
            region.dstSubresource.baseArrayLayer = dstCopy.origin.z;
            region.dstSubresource.layerCount = copySize.depthOrArrayLayers;
            region.dstOffset.z = 0;
            break;
        case wgpu::TextureDimension::e3D:
            has3DTextureInCopy = true;
            region.dstSubresource.baseArrayLayer = 0;
            region.dstSubresource.layerCount = 1;
            region.dstOffset.z = dstCopy.origin.z;
            break;
    }

    ASSERT(HasSameTextureCopyExtent(srcCopy, dstCopy, copySize));
    Extent3D imageExtent = ComputeTextureCopyExtent(dstCopy, copySize);
    region.extent.width = imageExtent.width;
    region.extent.height = imageExtent.height;
    region.extent.depth = has3DTextureInCopy ? copySize.depthOrArrayLayers : 1;

    return region;
}

class DescriptorSetTracker : public BindGroupTrackerBase<true, uint32_t> {
  public:
    DescriptorSetTracker() = default;

    void Apply(Device* device,
               CommandRecordingContext* recordingContext,
               VkPipelineBindPoint bindPoint) {
        BeforeApply();
        for (BindGroupIndex dirtyIndex : IterateBitSet(mDirtyBindGroupsObjectChangedOrIsDynamic)) {
            VkDescriptorSet set = ToBackend(mBindGroups[dirtyIndex])->GetHandle();
            const uint32_t* dynamicOffset =
                mDynamicOffsetCounts[dirtyIndex] > 0 ? mDynamicOffsets[dirtyIndex].data() : nullptr;
            device->fn.CmdBindDescriptorSets(recordingContext->commandBuffer, bindPoint,
                                             ToBackend(mPipelineLayout)->GetHandle(),
                                             static_cast<uint32_t>(dirtyIndex), 1, &*set,
                                             mDynamicOffsetCounts[dirtyIndex], dynamicOffset);
        }
        AfterApply();
    }
};

// Records the necessary barriers for a synchronization scope using the resource usage
// data pre-computed in the frontend. Also performs lazy initialization if required.
void TransitionAndClearForSyncScope(Device* device,
                                    CommandRecordingContext* recordingContext,
                                    const SyncScopeResourceUsage& scope) {
    std::vector<VkBufferMemoryBarrier> bufferBarriers;
    std::vector<VkImageMemoryBarrier> imageBarriers;
    VkPipelineStageFlags srcStages = 0;
    VkPipelineStageFlags dstStages = 0;

    for (size_t i = 0; i < scope.buffers.size(); ++i) {
        Buffer* buffer = ToBackend(scope.buffers[i]);
        buffer->EnsureDataInitialized(recordingContext);

        VkBufferMemoryBarrier bufferBarrier;
        if (buffer->TransitionUsageAndGetResourceBarrier(scope.bufferUsages[i], &bufferBarrier,
                                                         &srcStages, &dstStages)) {
            bufferBarriers.push_back(bufferBarrier);
        }
    }

    for (size_t i = 0; i < scope.textures.size(); ++i) {
        Texture* texture = ToBackend(scope.textures[i]);

        // Clear subresources that are not render attachments. Render attachments will be
        // cleared in RecordBeginRenderPass by setting the loadop to clear when the texture
        // subresource has not been initialized before the render pass.
        scope.textureUsages[i].Iterate(
            [&](const SubresourceRange& range, wgpu::TextureUsage usage) {
                if (usage & ~wgpu::TextureUsage::RenderAttachment) {
                    texture->EnsureSubresourceContentInitialized(recordingContext, range);
                }
            });
        texture->TransitionUsageForPass(recordingContext, scope.textureUsages[i], &imageBarriers,
                                        &srcStages, &dstStages);
    }

    if (bufferBarriers.size() || imageBarriers.size()) {
        device->fn.CmdPipelineBarrier(recordingContext->commandBuffer, srcStages, dstStages, 0, 0,
                                      nullptr, bufferBarriers.size(), bufferBarriers.data(),
                                      imageBarriers.size(), imageBarriers.data());
    }
}

MaybeError RecordBeginRenderPass(CommandRecordingContext* recordingContext,
                                 Device* device,
                                 BeginRenderPassCmd* renderPass) {
    VkCommandBuffer commands = recordingContext->commandBuffer;

    // Query a VkRenderPass from the cache
    VkRenderPass renderPassVK = VK_NULL_HANDLE;
    {
        RenderPassCacheQuery query;

        for (ColorAttachmentIndex i :
             IterateBitSet(renderPass->attachmentState->GetColorAttachmentsMask())) {
            const auto& attachmentInfo = renderPass->colorAttachments[i];

            bool hasResolveTarget = attachmentInfo.resolveTarget != nullptr;

            query.SetColor(i, attachmentInfo.view->GetFormat().format, attachmentInfo.loadOp,
                           attachmentInfo.storeOp, hasResolveTarget);
        }

        if (renderPass->attachmentState->HasDepthStencilAttachment()) {
            const auto& attachmentInfo = renderPass->depthStencilAttachment;

            query.SetDepthStencil(attachmentInfo.view->GetTexture()->GetFormat().format,
                                  attachmentInfo.depthLoadOp, attachmentInfo.depthStoreOp,
                                  attachmentInfo.stencilLoadOp, attachmentInfo.stencilStoreOp,
                                  attachmentInfo.depthReadOnly || attachmentInfo.stencilReadOnly);
        }

        query.SetSampleCount(renderPass->attachmentState->GetSampleCount());

        DAWN_TRY_ASSIGN(renderPassVK, device->GetRenderPassCache()->GetRenderPass(query));
    }

    // Create a framebuffer that will be used once for the render pass and gather the clear
    // values for the attachments at the same time.
    std::array<VkClearValue, kMaxColorAttachments + 1> clearValues;
    VkFramebuffer framebuffer = VK_NULL_HANDLE;
    uint32_t attachmentCount = 0;
    {
        // Fill in the attachment info that will be chained in the framebuffer create info.
        std::array<VkImageView, kMaxColorAttachments * 2 + 1> attachments;

        for (ColorAttachmentIndex i :
             IterateBitSet(renderPass->attachmentState->GetColorAttachmentsMask())) {
            auto& attachmentInfo = renderPass->colorAttachments[i];
            TextureView* view = ToBackend(attachmentInfo.view.Get());
            if (view == nullptr) {
                continue;
            }

            attachments[attachmentCount] = view->GetHandle();

            switch (view->GetFormat().GetAspectInfo(Aspect::Color).baseType) {
                case wgpu::TextureComponentType::Float: {
                    const std::array<float, 4> appliedClearColor =
                        ConvertToFloatColor(attachmentInfo.clearColor);
                    for (uint32_t i = 0; i < 4; ++i) {
                        clearValues[attachmentCount].color.float32[i] = appliedClearColor[i];
                    }
                    break;
                }
                case wgpu::TextureComponentType::Uint: {
                    const std::array<uint32_t, 4> appliedClearColor =
                        ConvertToUnsignedIntegerColor(attachmentInfo.clearColor);
                    for (uint32_t i = 0; i < 4; ++i) {
                        clearValues[attachmentCount].color.uint32[i] = appliedClearColor[i];
                    }
                    break;
                }
                case wgpu::TextureComponentType::Sint: {
                    const std::array<int32_t, 4> appliedClearColor =
                        ConvertToSignedIntegerColor(attachmentInfo.clearColor);
                    for (uint32_t i = 0; i < 4; ++i) {
                        clearValues[attachmentCount].color.int32[i] = appliedClearColor[i];
                    }
                    break;
                }

                case wgpu::TextureComponentType::DepthComparison:
                    UNREACHABLE();
            }
            attachmentCount++;
        }

        if (renderPass->attachmentState->HasDepthStencilAttachment()) {
            auto& attachmentInfo = renderPass->depthStencilAttachment;
            TextureView* view = ToBackend(attachmentInfo.view.Get());

            attachments[attachmentCount] = view->GetHandle();

            clearValues[attachmentCount].depthStencil.depth = attachmentInfo.clearDepth;
            clearValues[attachmentCount].depthStencil.stencil = attachmentInfo.clearStencil;

            attachmentCount++;
        }

        for (ColorAttachmentIndex i :
             IterateBitSet(renderPass->attachmentState->GetColorAttachmentsMask())) {
            if (renderPass->colorAttachments[i].resolveTarget != nullptr) {
                TextureView* view = ToBackend(renderPass->colorAttachments[i].resolveTarget.Get());

                attachments[attachmentCount] = view->GetHandle();

                attachmentCount++;
            }
        }

        // Chain attachments and create the framebuffer
        VkFramebufferCreateInfo createInfo;
        createInfo.sType = VK_STRUCTURE_TYPE_FRAMEBUFFER_CREATE_INFO;
        createInfo.pNext = nullptr;
        createInfo.flags = 0;
        createInfo.renderPass = renderPassVK;
        createInfo.attachmentCount = attachmentCount;
        createInfo.pAttachments = AsVkArray(attachments.data());
        createInfo.width = renderPass->width;
        createInfo.height = renderPass->height;
        createInfo.layers = 1;

        DAWN_TRY(CheckVkSuccess(device->fn.CreateFramebuffer(device->GetVkDevice(), &createInfo,
                                                             nullptr, &*framebuffer),
                                "CreateFramebuffer"));

        // We don't reuse VkFramebuffers so mark the framebuffer for deletion as soon as the
        // commands currently being recorded are finished.
        device->GetFencedDeleter()->DeleteWhenUnused(framebuffer);
    }

    VkRenderPassBeginInfo beginInfo;
    beginInfo.sType = VK_STRUCTURE_TYPE_RENDER_PASS_BEGIN_INFO;
    beginInfo.pNext = nullptr;
    beginInfo.renderPass = renderPassVK;
    beginInfo.framebuffer = framebuffer;
    beginInfo.renderArea.offset.x = 0;
    beginInfo.renderArea.offset.y = 0;
    beginInfo.renderArea.extent.width = renderPass->width;
    beginInfo.renderArea.extent.height = renderPass->height;
    beginInfo.clearValueCount = attachmentCount;
    beginInfo.pClearValues = clearValues.data();

    device->fn.CmdBeginRenderPass(commands, &beginInfo, VK_SUBPASS_CONTENTS_INLINE);

    return {};
}

// Reset the query sets used on render pass because the reset command must be called outside
// render pass.
void ResetUsedQuerySetsOnRenderPass(Device* device,
                                    VkCommandBuffer commands,
                                    QuerySetBase* querySet,
                                    const std::vector<bool>& availability) {
    ASSERT(availability.size() == querySet->GetQueryAvailability().size());

    auto currentIt = availability.begin();
    auto lastIt = availability.end();
    // Traverse the used queries which availability are true.
    while (currentIt != lastIt) {
        auto firstTrueIt = std::find(currentIt, lastIt, true);
        // No used queries need to be reset
        if (firstTrueIt == lastIt) {
            break;
        }

        auto nextFalseIt = std::find(firstTrueIt, lastIt, false);

        uint32_t queryIndex = std::distance(availability.begin(), firstTrueIt);
        uint32_t queryCount = std::distance(firstTrueIt, nextFalseIt);

        // Reset the queries between firstTrueIt and nextFalseIt (which is at most
        // lastIt)
        device->fn.CmdResetQueryPool(commands, ToBackend(querySet)->GetHandle(), queryIndex,
                                     queryCount);

        // Set current iterator to next false
        currentIt = nextFalseIt;
    }
}

void RecordWriteTimestampCmd(CommandRecordingContext* recordingContext,
                             Device* device,
                             WriteTimestampCmd* cmd) {
    VkCommandBuffer commands = recordingContext->commandBuffer;
    QuerySet* querySet = ToBackend(cmd->querySet.Get());

    device->fn.CmdWriteTimestamp(commands, VK_PIPELINE_STAGE_ALL_COMMANDS_BIT,
                                 querySet->GetHandle(), cmd->queryIndex);
}

void RecordResolveQuerySetCmd(VkCommandBuffer commands,
                              Device* device,
                              QuerySet* querySet,
                              uint32_t firstQuery,
                              uint32_t queryCount,
                              Buffer* destination,
                              uint64_t destinationOffset) {
    const std::vector<bool>& availability = querySet->GetQueryAvailability();

    auto currentIt = availability.begin() + firstQuery;
    auto lastIt = availability.begin() + firstQuery + queryCount;

    // Traverse available queries in the range of [firstQuery, firstQuery +  queryCount - 1]
    while (currentIt != lastIt) {
        auto firstTrueIt = std::find(currentIt, lastIt, true);
        // No available query found for resolving
        if (firstTrueIt == lastIt) {
            break;
        }
        auto nextFalseIt = std::find(firstTrueIt, lastIt, false);

        // The query index of firstTrueIt where the resolving starts
        uint32_t resolveQueryIndex = std::distance(availability.begin(), firstTrueIt);
        // The queries count between firstTrueIt and nextFalseIt need to be resolved
        uint32_t resolveQueryCount = std::distance(firstTrueIt, nextFalseIt);

        // Calculate destinationOffset based on the current resolveQueryIndex and firstQuery
        uint32_t resolveDestinationOffset =
            destinationOffset + (resolveQueryIndex - firstQuery) * sizeof(uint64_t);

        // Resolve the queries between firstTrueIt and nextFalseIt (which is at most lastIt)
        device->fn.CmdCopyQueryPoolResults(commands, querySet->GetHandle(), resolveQueryIndex,
                                           resolveQueryCount, destination->GetHandle(),
                                           resolveDestinationOffset, sizeof(uint64_t),
                                           VK_QUERY_RESULT_64_BIT | VK_QUERY_RESULT_WAIT_BIT);

        // Set current iterator to next false
        currentIt = nextFalseIt;
    }
}

}  // anonymous namespace

// static
Ref<CommandBuffer> CommandBuffer::Create(CommandEncoder* encoder,
                                         const CommandBufferDescriptor* descriptor) {
    return AcquireRef(new CommandBuffer(encoder, descriptor));
}

CommandBuffer::CommandBuffer(CommandEncoder* encoder, const CommandBufferDescriptor* descriptor)
    : CommandBufferBase(encoder, descriptor) {}

MaybeError CommandBuffer::RecordCopyImageWithTemporaryBuffer(
    CommandRecordingContext* recordingContext,
    const TextureCopy& srcCopy,
    const TextureCopy& dstCopy,
    const Extent3D& copySize) {
    ASSERT(srcCopy.texture->GetFormat().CopyCompatibleWith(dstCopy.texture->GetFormat()));
    ASSERT(srcCopy.aspect == dstCopy.aspect);
    dawn::native::Format format = srcCopy.texture->GetFormat();
    const TexelBlockInfo& blockInfo = format.GetAspectInfo(srcCopy.aspect).block;
    ASSERT(copySize.width % blockInfo.width == 0);
    uint32_t widthInBlocks = copySize.width / blockInfo.width;
    ASSERT(copySize.height % blockInfo.height == 0);
    uint32_t heightInBlocks = copySize.height / blockInfo.height;

    // Create the temporary buffer. Note that We don't need to respect WebGPU's 256 alignment
    // because it isn't a hard constraint in Vulkan.
    uint64_t tempBufferSize =
        widthInBlocks * heightInBlocks * copySize.depthOrArrayLayers * blockInfo.byteSize;
    BufferDescriptor tempBufferDescriptor;
    tempBufferDescriptor.size = tempBufferSize;
    tempBufferDescriptor.usage = wgpu::BufferUsage::CopySrc | wgpu::BufferUsage::CopyDst;

    Device* device = ToBackend(GetDevice());
    Ref<BufferBase> tempBufferBase;
    DAWN_TRY_ASSIGN(tempBufferBase, device->CreateBuffer(&tempBufferDescriptor));
    Buffer* tempBuffer = ToBackend(tempBufferBase.Get());

    BufferCopy tempBufferCopy;
    tempBufferCopy.buffer = tempBuffer;
    tempBufferCopy.rowsPerImage = heightInBlocks;
    tempBufferCopy.offset = 0;
    tempBufferCopy.bytesPerRow = copySize.width / blockInfo.width * blockInfo.byteSize;

    VkCommandBuffer commands = recordingContext->commandBuffer;
    VkImage srcImage = ToBackend(srcCopy.texture)->GetHandle();
    VkImage dstImage = ToBackend(dstCopy.texture)->GetHandle();

    tempBuffer->TransitionUsageNow(recordingContext, wgpu::BufferUsage::CopyDst);
    VkBufferImageCopy srcToTempBufferRegion =
        ComputeBufferImageCopyRegion(tempBufferCopy, srcCopy, copySize);

    // The Dawn CopySrc usage is always mapped to GENERAL
    device->fn.CmdCopyImageToBuffer(commands, srcImage, VK_IMAGE_LAYOUT_GENERAL,
                                    tempBuffer->GetHandle(), 1, &srcToTempBufferRegion);

    tempBuffer->TransitionUsageNow(recordingContext, wgpu::BufferUsage::CopySrc);
    VkBufferImageCopy tempBufferToDstRegion =
        ComputeBufferImageCopyRegion(tempBufferCopy, dstCopy, copySize);

    // Dawn guarantees dstImage be in the TRANSFER_DST_OPTIMAL layout after the
    // copy command.
    device->fn.CmdCopyBufferToImage(commands, tempBuffer->GetHandle(), dstImage,
                                    VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL, 1,
                                    &tempBufferToDstRegion);

    recordingContext->tempBuffers.emplace_back(tempBuffer);

    return {};
}

MaybeError CommandBuffer::RecordCommands(CommandRecordingContext* recordingContext) {
    Device* device = ToBackend(GetDevice());
    VkCommandBuffer commands = recordingContext->commandBuffer;

    // Records the necessary barriers for the resource usage pre-computed by the frontend.
    // And resets the used query sets which are rewritten on the render pass.
    auto PrepareResourcesForRenderPass = [](Device* device,
                                            CommandRecordingContext* recordingContext,
                                            const RenderPassResourceUsage& usages) {
        TransitionAndClearForSyncScope(device, recordingContext, usages);

        // Reset all query set used on current render pass together before beginning render pass
        // because the reset command must be called outside render pass
        for (size_t i = 0; i < usages.querySets.size(); ++i) {
            ResetUsedQuerySetsOnRenderPass(device, recordingContext->commandBuffer,
                                           usages.querySets[i], usages.queryAvailabilities[i]);
        }
    };

    size_t nextComputePassNumber = 0;
    size_t nextRenderPassNumber = 0;

    Command type;
    while (mCommands.NextCommandId(&type)) {
        switch (type) {
            case Command::CopyBufferToBuffer: {
                CopyBufferToBufferCmd* copy = mCommands.NextCommand<CopyBufferToBufferCmd>();
                if (copy->size == 0) {
                    // Skip no-op copies.
                    break;
                }

                Buffer* srcBuffer = ToBackend(copy->source.Get());
                Buffer* dstBuffer = ToBackend(copy->destination.Get());

                srcBuffer->EnsureDataInitialized(recordingContext);
                dstBuffer->EnsureDataInitializedAsDestination(recordingContext,
                                                              copy->destinationOffset, copy->size);

                srcBuffer->TransitionUsageNow(recordingContext, wgpu::BufferUsage::CopySrc);
                dstBuffer->TransitionUsageNow(recordingContext, wgpu::BufferUsage::CopyDst);

                VkBufferCopy region;
                region.srcOffset = copy->sourceOffset;
                region.dstOffset = copy->destinationOffset;
                region.size = copy->size;

                VkBuffer srcHandle = srcBuffer->GetHandle();
                VkBuffer dstHandle = dstBuffer->GetHandle();
                device->fn.CmdCopyBuffer(commands, srcHandle, dstHandle, 1, &region);
                break;
            }

            case Command::CopyBufferToTexture: {
                CopyBufferToTextureCmd* copy = mCommands.NextCommand<CopyBufferToTextureCmd>();
                if (copy->copySize.width == 0 || copy->copySize.height == 0 ||
                    copy->copySize.depthOrArrayLayers == 0) {
                    // Skip no-op copies.
                    continue;
                }
                auto& src = copy->source;
                auto& dst = copy->destination;

                ToBackend(src.buffer)->EnsureDataInitialized(recordingContext);

                VkBufferImageCopy region = ComputeBufferImageCopyRegion(src, dst, copy->copySize);
                VkImageSubresourceLayers subresource = region.imageSubresource;

                SubresourceRange range =
                    GetSubresourcesAffectedByCopy(copy->destination, copy->copySize);

                if (IsCompleteSubresourceCopiedTo(dst.texture.Get(), copy->copySize,
                                                  subresource.mipLevel)) {
                    // Since texture has been overwritten, it has been "initialized"
                    dst.texture->SetIsSubresourceContentInitialized(true, range);
                } else {
                    ToBackend(dst.texture)
                        ->EnsureSubresourceContentInitialized(recordingContext, range);
                }
                ToBackend(src.buffer)
                    ->TransitionUsageNow(recordingContext, wgpu::BufferUsage::CopySrc);
                ToBackend(dst.texture)
                    ->TransitionUsageNow(recordingContext, wgpu::TextureUsage::CopyDst, range);
                VkBuffer srcBuffer = ToBackend(src.buffer)->GetHandle();
                VkImage dstImage = ToBackend(dst.texture)->GetHandle();

                // Dawn guarantees dstImage be in the TRANSFER_DST_OPTIMAL layout after the
                // copy command.
                device->fn.CmdCopyBufferToImage(commands, srcBuffer, dstImage,
                                                VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL, 1, &region);
                break;
            }

            case Command::CopyTextureToBuffer: {
                CopyTextureToBufferCmd* copy = mCommands.NextCommand<CopyTextureToBufferCmd>();
                if (copy->copySize.width == 0 || copy->copySize.height == 0 ||
                    copy->copySize.depthOrArrayLayers == 0) {
                    // Skip no-op copies.
                    continue;
                }
                auto& src = copy->source;
                auto& dst = copy->destination;

                ToBackend(dst.buffer)->EnsureDataInitializedAsDestination(recordingContext, copy);

                VkBufferImageCopy region = ComputeBufferImageCopyRegion(dst, src, copy->copySize);

                SubresourceRange range =
                    GetSubresourcesAffectedByCopy(copy->source, copy->copySize);

                ToBackend(src.texture)
                    ->EnsureSubresourceContentInitialized(recordingContext, range);

                ToBackend(src.texture)
                    ->TransitionUsageNow(recordingContext, wgpu::TextureUsage::CopySrc, range);
                ToBackend(dst.buffer)
                    ->TransitionUsageNow(recordingContext, wgpu::BufferUsage::CopyDst);

                VkImage srcImage = ToBackend(src.texture)->GetHandle();
                VkBuffer dstBuffer = ToBackend(dst.buffer)->GetHandle();
                // The Dawn CopySrc usage is always mapped to GENERAL
                device->fn.CmdCopyImageToBuffer(commands, srcImage, VK_IMAGE_LAYOUT_GENERAL,
                                                dstBuffer, 1, &region);
                break;
            }

            case Command::CopyTextureToTexture: {
                CopyTextureToTextureCmd* copy = mCommands.NextCommand<CopyTextureToTextureCmd>();
                if (copy->copySize.width == 0 || copy->copySize.height == 0 ||
                    copy->copySize.depthOrArrayLayers == 0) {
                    // Skip no-op copies.
                    continue;
                }
                TextureCopy& src = copy->source;
                TextureCopy& dst = copy->destination;
                SubresourceRange srcRange = GetSubresourcesAffectedByCopy(src, copy->copySize);
                SubresourceRange dstRange = GetSubresourcesAffectedByCopy(dst, copy->copySize);

                ToBackend(src.texture)
                    ->EnsureSubresourceContentInitialized(recordingContext, srcRange);
                if (IsCompleteSubresourceCopiedTo(dst.texture.Get(), copy->copySize,
                                                  dst.mipLevel)) {
                    // Since destination texture has been overwritten, it has been "initialized"
                    dst.texture->SetIsSubresourceContentInitialized(true, dstRange);
                } else {
                    ToBackend(dst.texture)
                        ->EnsureSubresourceContentInitialized(recordingContext, dstRange);
                }

                if (src.texture.Get() == dst.texture.Get() && src.mipLevel == dst.mipLevel) {
                    // When there are overlapped subresources, the layout of the overlapped
                    // subresources should all be GENERAL instead of what we set now. Currently
                    // it is not allowed to copy with overlapped subresources, but we still
                    // add the ASSERT here as a reminder for this possible misuse.
                    ASSERT(!IsRangeOverlapped(src.origin.z, dst.origin.z,
                                              copy->copySize.depthOrArrayLayers));
                }

                ToBackend(src.texture)
                    ->TransitionUsageNow(recordingContext, wgpu::TextureUsage::CopySrc, srcRange);
                ToBackend(dst.texture)
                    ->TransitionUsageNow(recordingContext, wgpu::TextureUsage::CopyDst, dstRange);

                // In some situations we cannot do texture-to-texture copies with vkCmdCopyImage
                // because as Vulkan SPEC always validates image copies with the virtual size of
                // the image subresource, when the extent that fits in the copy region of one
                // subresource but does not fit in the one of another subresource, we will fail
                // to find a valid extent to satisfy the requirements on both source and
                // destination image subresource. For example, when the source is the first
                // level of a 16x16 texture in BC format, and the destination is the third level
                // of a 60x60 texture in the same format, neither 16x16 nor 15x15 is valid as
                // the extent of vkCmdCopyImage.
                // Our workaround for this issue is replacing the texture-to-texture copy with
                // one texture-to-buffer copy and one buffer-to-texture copy.
                bool copyUsingTemporaryBuffer =
                    device->IsToggleEnabled(
                        Toggle::UseTemporaryBufferInCompressedTextureToTextureCopy) &&
                    src.texture->GetFormat().isCompressed &&
                    !HasSameTextureCopyExtent(src, dst, copy->copySize);

                if (!copyUsingTemporaryBuffer) {
                    VkImage srcImage = ToBackend(src.texture)->GetHandle();
                    VkImage dstImage = ToBackend(dst.texture)->GetHandle();

                    for (Aspect aspect : IterateEnumMask(src.texture->GetFormat().aspects)) {
                        ASSERT(dst.texture->GetFormat().aspects & aspect);
                        VkImageCopy region =
                            ComputeImageCopyRegion(src, dst, copy->copySize, aspect);

                        // Dawn guarantees dstImage be in the TRANSFER_DST_OPTIMAL layout after
                        // the copy command.
                        device->fn.CmdCopyImage(commands, srcImage, VK_IMAGE_LAYOUT_GENERAL,
                                                dstImage, VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL, 1,
                                                &region);
                    }
                } else {
                    DAWN_TRY(RecordCopyImageWithTemporaryBuffer(recordingContext, src, dst,
                                                                copy->copySize));
                }

                break;
            }

            case Command::ClearBuffer: {
                ClearBufferCmd* cmd = mCommands.NextCommand<ClearBufferCmd>();
                if (cmd->size == 0) {
                    // Skip no-op fills.
                    break;
                }

                Buffer* dstBuffer = ToBackend(cmd->buffer.Get());
                bool clearedToZero = dstBuffer->EnsureDataInitializedAsDestination(
                    recordingContext, cmd->offset, cmd->size);

                if (!clearedToZero) {
                    dstBuffer->TransitionUsageNow(recordingContext, wgpu::BufferUsage::CopyDst);
                    device->fn.CmdFillBuffer(recordingContext->commandBuffer,
                                             dstBuffer->GetHandle(), cmd->offset, cmd->size, 0u);
                }

                break;
            }

            case Command::BeginRenderPass: {
                BeginRenderPassCmd* cmd = mCommands.NextCommand<BeginRenderPassCmd>();

                PrepareResourcesForRenderPass(
                    device, recordingContext,
                    GetResourceUsages().renderPasses[nextRenderPassNumber]);

                LazyClearRenderPassAttachments(cmd);
                DAWN_TRY(RecordRenderPass(recordingContext, cmd));

                nextRenderPassNumber++;
                break;
            }

            case Command::BeginComputePass: {
                mCommands.NextCommand<BeginComputePassCmd>();

                DAWN_TRY(RecordComputePass(
                    recordingContext, GetResourceUsages().computePasses[nextComputePassNumber]));

                nextComputePassNumber++;
                break;
            }

            case Command::ResolveQuerySet: {
                ResolveQuerySetCmd* cmd = mCommands.NextCommand<ResolveQuerySetCmd>();
                QuerySet* querySet = ToBackend(cmd->querySet.Get());
                Buffer* destination = ToBackend(cmd->destination.Get());

                destination->EnsureDataInitializedAsDestination(
                    recordingContext, cmd->destinationOffset, cmd->queryCount * sizeof(uint64_t));

                // vkCmdCopyQueryPoolResults only can retrieve available queries because
                // VK_QUERY_RESULT_WAIT_BIT is set. In order to resolve the unavailable queries
                // as 0s, we need to clear the resolving region of the destination buffer to 0s.
                auto startIt = querySet->GetQueryAvailability().begin() + cmd->firstQuery;
                auto endIt =
                    querySet->GetQueryAvailability().begin() + cmd->firstQuery + cmd->queryCount;
                bool hasUnavailableQueries = std::find(startIt, endIt, false) != endIt;
                if (hasUnavailableQueries) {
                    destination->TransitionUsageNow(recordingContext, wgpu::BufferUsage::CopyDst);
                    device->fn.CmdFillBuffer(commands, destination->GetHandle(),
                                             cmd->destinationOffset,
                                             cmd->queryCount * sizeof(uint64_t), 0u);
                }

                destination->TransitionUsageNow(recordingContext, wgpu::BufferUsage::QueryResolve);

                RecordResolveQuerySetCmd(commands, device, querySet, cmd->firstQuery,
                                         cmd->queryCount, destination, cmd->destinationOffset);

                break;
            }

            case Command::WriteTimestamp: {
                WriteTimestampCmd* cmd = mCommands.NextCommand<WriteTimestampCmd>();

                // The query must be reset between uses.
                device->fn.CmdResetQueryPool(commands, ToBackend(cmd->querySet)->GetHandle(),
                                             cmd->queryIndex, 1);

                RecordWriteTimestampCmd(recordingContext, device, cmd);
                break;
            }

            case Command::InsertDebugMarker: {
                if (device->GetGlobalInfo().HasExt(InstanceExt::DebugUtils)) {
                    InsertDebugMarkerCmd* cmd = mCommands.NextCommand<InsertDebugMarkerCmd>();
                    const char* label = mCommands.NextData<char>(cmd->length + 1);
                    VkDebugUtilsLabelEXT utilsLabel;
                    utilsLabel.sType = VK_STRUCTURE_TYPE_DEBUG_UTILS_LABEL_EXT;
                    utilsLabel.pNext = nullptr;
                    utilsLabel.pLabelName = label;
                    // Default color to black
                    utilsLabel.color[0] = 0.0;
                    utilsLabel.color[1] = 0.0;
                    utilsLabel.color[2] = 0.0;
                    utilsLabel.color[3] = 1.0;
                    device->fn.CmdInsertDebugUtilsLabelEXT(commands, &utilsLabel);
                } else {
                    SkipCommand(&mCommands, Command::InsertDebugMarker);
                }
                break;
            }

            case Command::PopDebugGroup: {
                if (device->GetGlobalInfo().HasExt(InstanceExt::DebugUtils)) {
                    mCommands.NextCommand<PopDebugGroupCmd>();
                    device->fn.CmdEndDebugUtilsLabelEXT(commands);
                } else {
                    SkipCommand(&mCommands, Command::PopDebugGroup);
                }
                break;
            }

            case Command::PushDebugGroup: {
                if (device->GetGlobalInfo().HasExt(InstanceExt::DebugUtils)) {
                    PushDebugGroupCmd* cmd = mCommands.NextCommand<PushDebugGroupCmd>();
                    const char* label = mCommands.NextData<char>(cmd->length + 1);
                    VkDebugUtilsLabelEXT utilsLabel;
                    utilsLabel.sType = VK_STRUCTURE_TYPE_DEBUG_UTILS_LABEL_EXT;
                    utilsLabel.pNext = nullptr;
                    utilsLabel.pLabelName = label;
                    // Default color to black
                    utilsLabel.color[0] = 0.0;
                    utilsLabel.color[1] = 0.0;
                    utilsLabel.color[2] = 0.0;
                    utilsLabel.color[3] = 1.0;
                    device->fn.CmdBeginDebugUtilsLabelEXT(commands, &utilsLabel);
                } else {
                    SkipCommand(&mCommands, Command::PushDebugGroup);
                }
                break;
            }

            case Command::WriteBuffer: {
                WriteBufferCmd* write = mCommands.NextCommand<WriteBufferCmd>();
                const uint64_t offset = write->offset;
                const uint64_t size = write->size;
                if (size == 0) {
                    continue;
                }

                Buffer* dstBuffer = ToBackend(write->buffer.Get());
                uint8_t* data = mCommands.NextData<uint8_t>(size);
                Device* device = ToBackend(GetDevice());

                UploadHandle uploadHandle;
                DAWN_TRY_ASSIGN(uploadHandle, device->GetDynamicUploader()->Allocate(
                                                  size, device->GetPendingCommandSerial(),
                                                  kCopyBufferToBufferOffsetAlignment));
                ASSERT(uploadHandle.mappedBuffer != nullptr);
                memcpy(uploadHandle.mappedBuffer, data, size);

                dstBuffer->EnsureDataInitializedAsDestination(recordingContext, offset, size);

                dstBuffer->TransitionUsageNow(recordingContext, wgpu::BufferUsage::CopyDst);

                VkBufferCopy copy;
                copy.srcOffset = uploadHandle.startOffset;
                copy.dstOffset = offset;
                copy.size = size;

                device->fn.CmdCopyBuffer(commands,
                                         ToBackend(uploadHandle.stagingBuffer)->GetBufferHandle(),
                                         dstBuffer->GetHandle(), 1, &copy);
                break;
            }

            default:
                break;
        }
    }

    return {};
}

MaybeError CommandBuffer::RecordComputePass(CommandRecordingContext* recordingContext,
                                            const ComputePassResourceUsage& resourceUsages) {
    Device* device = ToBackend(GetDevice());
    VkCommandBuffer commands = recordingContext->commandBuffer;

    uint64_t currentDispatch = 0;
    DescriptorSetTracker descriptorSets = {};

    Command type;
    while (mCommands.NextCommandId(&type)) {
        switch (type) {
            case Command::EndComputePass: {
                mCommands.NextCommand<EndComputePassCmd>();
                return {};
            }

            case Command::Dispatch: {
                DispatchCmd* dispatch = mCommands.NextCommand<DispatchCmd>();

                TransitionAndClearForSyncScope(device, recordingContext,
                                               resourceUsages.dispatchUsages[currentDispatch]);
                descriptorSets.Apply(device, recordingContext, VK_PIPELINE_BIND_POINT_COMPUTE);

                device->fn.CmdDispatch(commands, dispatch->x, dispatch->y, dispatch->z);
                currentDispatch++;
                break;
            }

            case Command::DispatchIndirect: {
                DispatchIndirectCmd* dispatch = mCommands.NextCommand<DispatchIndirectCmd>();
                VkBuffer indirectBuffer = ToBackend(dispatch->indirectBuffer)->GetHandle();

                TransitionAndClearForSyncScope(device, recordingContext,
                                               resourceUsages.dispatchUsages[currentDispatch]);
                descriptorSets.Apply(device, recordingContext, VK_PIPELINE_BIND_POINT_COMPUTE);

                device->fn.CmdDispatchIndirect(commands, indirectBuffer,
                                               static_cast<VkDeviceSize>(dispatch->indirectOffset));
                currentDispatch++;
                break;
            }

            case Command::SetBindGroup: {
                SetBindGroupCmd* cmd = mCommands.NextCommand<SetBindGroupCmd>();

                BindGroup* bindGroup = ToBackend(cmd->group.Get());
                uint32_t* dynamicOffsets = nullptr;
                if (cmd->dynamicOffsetCount > 0) {
                    dynamicOffsets = mCommands.NextData<uint32_t>(cmd->dynamicOffsetCount);
                }

                descriptorSets.OnSetBindGroup(cmd->index, bindGroup, cmd->dynamicOffsetCount,
                                              dynamicOffsets);
                break;
            }

            case Command::SetComputePipeline: {
                SetComputePipelineCmd* cmd = mCommands.NextCommand<SetComputePipelineCmd>();
                ComputePipeline* pipeline = ToBackend(cmd->pipeline).Get();

                device->fn.CmdBindPipeline(commands, VK_PIPELINE_BIND_POINT_COMPUTE,
                                           pipeline->GetHandle());
                descriptorSets.OnSetPipeline(pipeline);
                break;
            }

            case Command::InsertDebugMarker: {
                if (device->GetGlobalInfo().HasExt(InstanceExt::DebugUtils)) {
                    InsertDebugMarkerCmd* cmd = mCommands.NextCommand<InsertDebugMarkerCmd>();
                    const char* label = mCommands.NextData<char>(cmd->length + 1);
                    VkDebugUtilsLabelEXT utilsLabel;
                    utilsLabel.sType = VK_STRUCTURE_TYPE_DEBUG_UTILS_LABEL_EXT;
                    utilsLabel.pNext = nullptr;
                    utilsLabel.pLabelName = label;
                    // Default color to black
                    utilsLabel.color[0] = 0.0;
                    utilsLabel.color[1] = 0.0;
                    utilsLabel.color[2] = 0.0;
                    utilsLabel.color[3] = 1.0;
                    device->fn.CmdInsertDebugUtilsLabelEXT(commands, &utilsLabel);
                } else {
                    SkipCommand(&mCommands, Command::InsertDebugMarker);
                }
                break;
            }

            case Command::PopDebugGroup: {
                if (device->GetGlobalInfo().HasExt(InstanceExt::DebugUtils)) {
                    mCommands.NextCommand<PopDebugGroupCmd>();
                    device->fn.CmdEndDebugUtilsLabelEXT(commands);
                } else {
                    SkipCommand(&mCommands, Command::PopDebugGroup);
                }
                break;
            }

            case Command::PushDebugGroup: {
                if (device->GetGlobalInfo().HasExt(InstanceExt::DebugUtils)) {
                    PushDebugGroupCmd* cmd = mCommands.NextCommand<PushDebugGroupCmd>();
                    const char* label = mCommands.NextData<char>(cmd->length + 1);
                    VkDebugUtilsLabelEXT utilsLabel;
                    utilsLabel.sType = VK_STRUCTURE_TYPE_DEBUG_UTILS_LABEL_EXT;
                    utilsLabel.pNext = nullptr;
                    utilsLabel.pLabelName = label;
                    // Default color to black
                    utilsLabel.color[0] = 0.0;
                    utilsLabel.color[1] = 0.0;
                    utilsLabel.color[2] = 0.0;
                    utilsLabel.color[3] = 1.0;
                    device->fn.CmdBeginDebugUtilsLabelEXT(commands, &utilsLabel);
                } else {
                    SkipCommand(&mCommands, Command::PushDebugGroup);
                }
                break;
            }

            case Command::WriteTimestamp: {
                WriteTimestampCmd* cmd = mCommands.NextCommand<WriteTimestampCmd>();

                // The query must be reset between uses.
                device->fn.CmdResetQueryPool(commands, ToBackend(cmd->querySet)->GetHandle(),
                                             cmd->queryIndex, 1);

                RecordWriteTimestampCmd(recordingContext, device, cmd);
                break;
            }

            default:
                UNREACHABLE();
        }
    }

    // EndComputePass should have been called
    UNREACHABLE();
}

MaybeError CommandBuffer::RecordRenderPass(CommandRecordingContext* recordingContext,
                                           BeginRenderPassCmd* renderPassCmd) {
    Device* device = ToBackend(GetDevice());
    VkCommandBuffer commands = recordingContext->commandBuffer;

    DAWN_TRY(RecordBeginRenderPass(recordingContext, device, renderPassCmd));

    // Set the default value for the dynamic state
    {
        device->fn.CmdSetLineWidth(commands, 1.0f);
        device->fn.CmdSetDepthBounds(commands, 0.0f, 1.0f);

        device->fn.CmdSetStencilReference(commands, VK_STENCIL_FRONT_AND_BACK, 0);

        float blendConstants[4] = {
            0.0f,
            0.0f,
            0.0f,
            0.0f,
        };
        device->fn.CmdSetBlendConstants(commands, blendConstants);

        // The viewport and scissor default to cover all of the attachments
        VkViewport viewport;
        viewport.x = 0.0f;
        viewport.y = static_cast<float>(renderPassCmd->height);
        viewport.width = static_cast<float>(renderPassCmd->width);
        viewport.height = -static_cast<float>(renderPassCmd->height);
        viewport.minDepth = 0.0f;
        viewport.maxDepth = 1.0f;
        device->fn.CmdSetViewport(commands, 0, 1, &viewport);

        VkRect2D scissorRect;
        scissorRect.offset.x = 0;
        scissorRect.offset.y = 0;
        scissorRect.extent.width = renderPassCmd->width;
        scissorRect.extent.height = renderPassCmd->height;
        device->fn.CmdSetScissor(commands, 0, 1, &scissorRect);
    }

    DescriptorSetTracker descriptorSets = {};
    RenderPipeline* lastPipeline = nullptr;

    auto EncodeRenderBundleCommand = [&](CommandIterator* iter, Command type) {
        switch (type) {
            case Command::Draw: {
                DrawCmd* draw = iter->NextCommand<DrawCmd>();

                descriptorSets.Apply(device, recordingContext, VK_PIPELINE_BIND_POINT_GRAPHICS);
                device->fn.CmdDraw(commands, draw->vertexCount, draw->instanceCount,
                                   draw->firstVertex, draw->firstInstance);
                break;
            }

            case Command::DrawIndexed: {
                DrawIndexedCmd* draw = iter->NextCommand<DrawIndexedCmd>();

                descriptorSets.Apply(device, recordingContext, VK_PIPELINE_BIND_POINT_GRAPHICS);
                device->fn.CmdDrawIndexed(commands, draw->indexCount, draw->instanceCount,
                                          draw->firstIndex, draw->baseVertex, draw->firstInstance);
                break;
            }

            case Command::DrawIndirect: {
                DrawIndirectCmd* draw = iter->NextCommand<DrawIndirectCmd>();
                Buffer* buffer = ToBackend(draw->indirectBuffer.Get());

                descriptorSets.Apply(device, recordingContext, VK_PIPELINE_BIND_POINT_GRAPHICS);
                device->fn.CmdDrawIndirect(commands, buffer->GetHandle(),
                                           static_cast<VkDeviceSize>(draw->indirectOffset), 1, 0);
                break;
            }

            case Command::DrawIndexedIndirect: {
                DrawIndexedIndirectCmd* draw = iter->NextCommand<DrawIndexedIndirectCmd>();
                Buffer* buffer = ToBackend(draw->indirectBuffer.Get());
                ASSERT(buffer != nullptr);

                descriptorSets.Apply(device, recordingContext, VK_PIPELINE_BIND_POINT_GRAPHICS);
                device->fn.CmdDrawIndexedIndirect(commands, buffer->GetHandle(),
                                                  static_cast<VkDeviceSize>(draw->indirectOffset),
                                                  1, 0);
                break;
            }

            case Command::InsertDebugMarker: {
                if (device->GetGlobalInfo().HasExt(InstanceExt::DebugUtils)) {
                    InsertDebugMarkerCmd* cmd = iter->NextCommand<InsertDebugMarkerCmd>();
                    const char* label = iter->NextData<char>(cmd->length + 1);
                    VkDebugUtilsLabelEXT utilsLabel;
                    utilsLabel.sType = VK_STRUCTURE_TYPE_DEBUG_UTILS_LABEL_EXT;
                    utilsLabel.pNext = nullptr;
                    utilsLabel.pLabelName = label;
                    // Default color to black
                    utilsLabel.color[0] = 0.0;
                    utilsLabel.color[1] = 0.0;
                    utilsLabel.color[2] = 0.0;
                    utilsLabel.color[3] = 1.0;
                    device->fn.CmdInsertDebugUtilsLabelEXT(commands, &utilsLabel);
                } else {
                    SkipCommand(iter, Command::InsertDebugMarker);
                }
                break;
            }

            case Command::PopDebugGroup: {
                if (device->GetGlobalInfo().HasExt(InstanceExt::DebugUtils)) {
                    iter->NextCommand<PopDebugGroupCmd>();
                    device->fn.CmdEndDebugUtilsLabelEXT(commands);
                } else {
                    SkipCommand(iter, Command::PopDebugGroup);
                }
                break;
            }

            case Command::PushDebugGroup: {
                if (device->GetGlobalInfo().HasExt(InstanceExt::DebugUtils)) {
                    PushDebugGroupCmd* cmd = iter->NextCommand<PushDebugGroupCmd>();
                    const char* label = iter->NextData<char>(cmd->length + 1);
                    VkDebugUtilsLabelEXT utilsLabel;
                    utilsLabel.sType = VK_STRUCTURE_TYPE_DEBUG_UTILS_LABEL_EXT;
                    utilsLabel.pNext = nullptr;
                    utilsLabel.pLabelName = label;
                    // Default color to black
                    utilsLabel.color[0] = 0.0;
                    utilsLabel.color[1] = 0.0;
                    utilsLabel.color[2] = 0.0;
                    utilsLabel.color[3] = 1.0;
                    device->fn.CmdBeginDebugUtilsLabelEXT(commands, &utilsLabel);
                } else {
                    SkipCommand(iter, Command::PushDebugGroup);
                }
                break;
            }

            case Command::SetBindGroup: {
                SetBindGroupCmd* cmd = iter->NextCommand<SetBindGroupCmd>();
                BindGroup* bindGroup = ToBackend(cmd->group.Get());
                uint32_t* dynamicOffsets = nullptr;
                if (cmd->dynamicOffsetCount > 0) {
                    dynamicOffsets = iter->NextData<uint32_t>(cmd->dynamicOffsetCount);
                }

                descriptorSets.OnSetBindGroup(cmd->index, bindGroup, cmd->dynamicOffsetCount,
                                              dynamicOffsets);
                break;
            }

            case Command::SetIndexBuffer: {
                SetIndexBufferCmd* cmd = iter->NextCommand<SetIndexBufferCmd>();
                VkBuffer indexBuffer = ToBackend(cmd->buffer)->GetHandle();

                device->fn.CmdBindIndexBuffer(commands, indexBuffer, cmd->offset,
                                              VulkanIndexType(cmd->format));
                break;
            }

            case Command::SetRenderPipeline: {
                SetRenderPipelineCmd* cmd = iter->NextCommand<SetRenderPipelineCmd>();
                RenderPipeline* pipeline = ToBackend(cmd->pipeline).Get();

                device->fn.CmdBindPipeline(commands, VK_PIPELINE_BIND_POINT_GRAPHICS,
                                           pipeline->GetHandle());
                lastPipeline = pipeline;

                descriptorSets.OnSetPipeline(pipeline);
                break;
            }

            case Command::SetVertexBuffer: {
                SetVertexBufferCmd* cmd = iter->NextCommand<SetVertexBufferCmd>();
                VkBuffer buffer = ToBackend(cmd->buffer)->GetHandle();
                VkDeviceSize offset = static_cast<VkDeviceSize>(cmd->offset);

                device->fn.CmdBindVertexBuffers(commands, static_cast<uint8_t>(cmd->slot), 1,
                                                &*buffer, &offset);
                break;
            }

            default:
                UNREACHABLE();
                break;
        }
    };

    Command type;
    while (mCommands.NextCommandId(&type)) {
        switch (type) {
            case Command::EndRenderPass: {
                mCommands.NextCommand<EndRenderPassCmd>();
                device->fn.CmdEndRenderPass(commands);
                return {};
            }

            case Command::SetBlendConstant: {
                SetBlendConstantCmd* cmd = mCommands.NextCommand<SetBlendConstantCmd>();
                const std::array<float, 4> blendConstants = ConvertToFloatColor(cmd->color);
                device->fn.CmdSetBlendConstants(commands, blendConstants.data());
                break;
            }

            case Command::SetStencilReference: {
                SetStencilReferenceCmd* cmd = mCommands.NextCommand<SetStencilReferenceCmd>();
                device->fn.CmdSetStencilReference(commands, VK_STENCIL_FRONT_AND_BACK,
                                                  cmd->reference);
                break;
            }

            case Command::SetViewport: {
                SetViewportCmd* cmd = mCommands.NextCommand<SetViewportCmd>();
                VkViewport viewport;
                viewport.x = cmd->x;
                viewport.y = cmd->y + cmd->height;
                viewport.width = cmd->width;
                viewport.height = -cmd->height;
                viewport.minDepth = cmd->minDepth;
                viewport.maxDepth = cmd->maxDepth;

                // Vulkan disallows width = 0, but VK_KHR_maintenance1 which we require allows
                // height = 0 so use that to do an empty viewport.
                if (viewport.width == 0) {
                    viewport.height = 0;

                    // Set the viewport x range to a range that's always valid.
                    viewport.x = 0;
                    viewport.width = 1;
                }

                device->fn.CmdSetViewport(commands, 0, 1, &viewport);
                break;
            }

            case Command::SetScissorRect: {
                SetScissorRectCmd* cmd = mCommands.NextCommand<SetScissorRectCmd>();
                VkRect2D rect;
                rect.offset.x = cmd->x;
                rect.offset.y = cmd->y;
                rect.extent.width = cmd->width;
                rect.extent.height = cmd->height;

                device->fn.CmdSetScissor(commands, 0, 1, &rect);
                break;
            }

            case Command::ExecuteBundles: {
                ExecuteBundlesCmd* cmd = mCommands.NextCommand<ExecuteBundlesCmd>();
                auto bundles = mCommands.NextData<Ref<RenderBundleBase>>(cmd->count);

                for (uint32_t i = 0; i < cmd->count; ++i) {
                    CommandIterator* iter = bundles[i]->GetCommands();
                    iter->Reset();
                    while (iter->NextCommandId(&type)) {
                        EncodeRenderBundleCommand(iter, type);
                    }
                }
                break;
            }

            case Command::BeginOcclusionQuery: {
                BeginOcclusionQueryCmd* cmd = mCommands.NextCommand<BeginOcclusionQueryCmd>();

                device->fn.CmdBeginQuery(commands, ToBackend(cmd->querySet.Get())->GetHandle(),
                                         cmd->queryIndex, 0);
                break;
            }

            case Command::EndOcclusionQuery: {
                EndOcclusionQueryCmd* cmd = mCommands.NextCommand<EndOcclusionQueryCmd>();

                device->fn.CmdEndQuery(commands, ToBackend(cmd->querySet.Get())->GetHandle(),
                                       cmd->queryIndex);
                break;
            }

            case Command::WriteTimestamp: {
                WriteTimestampCmd* cmd = mCommands.NextCommand<WriteTimestampCmd>();

                RecordWriteTimestampCmd(recordingContext, device, cmd);
                break;
            }

            default: {
                EncodeRenderBundleCommand(&mCommands, type);
                break;
            }
        }
    }

    // EndRenderPass should have been called
    UNREACHABLE();
}

}  // namespace dawn::native::vulkan