| # Copyright 2012 The Dawn Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| import("../../../scripts/dawn_overrides_with_defaults.gni") |
| |
| import("//testing/test.gni") |
| import("${dawn_root}/generator/dawn_generator.gni") |
| import("${dawn_root}/scripts/dawn_features.gni") |
| |
| group("tests") { |
| testonly = true |
| deps = [ |
| ":dawn_end2end_tests", |
| ":dawn_perf_tests", |
| ":dawn_unittests", |
| "${dawn_root}/src/dawn/tests/benchmarks:dawn_benchmarks", |
| ] |
| } |
| |
| ############################################################################### |
| # Gtest Gmock - Handle building inside and outside of Chromium. |
| ############################################################################### |
| |
| # When building outside of Chromium we need to define our own targets for GTest |
| # and GMock. However when compiling inside of Chromium we need to reuse the |
| # existing targets, both because Chromium has a special harness for swarming |
| # and because otherwise the "gn check" fails. |
| |
| if (!build_with_chromium) { |
| # When we aren't in Chromium we define out own targets based on the location |
| # of the googletest repo. |
| googletest_dir = dawn_googletest_dir |
| |
| config("gtest_config") { |
| include_dirs = [ |
| "${googletest_dir}/googletest", |
| "${googletest_dir}/googletest/include", |
| ] |
| } |
| |
| static_library("gtest") { |
| testonly = true |
| sources = [ "${googletest_dir}/googletest/src/gtest-all.cc" ] |
| public_configs = [ ":gtest_config" ] |
| } |
| |
| config("gmock_config") { |
| include_dirs = [ |
| "${googletest_dir}/googlemock", |
| "${googletest_dir}/googlemock/include", |
| "${googletest_dir}/googletest/include", |
| ] |
| } |
| |
| static_library("gmock") { |
| testonly = true |
| sources = [ "${googletest_dir}/googlemock/src/gmock-all.cc" ] |
| public_configs = [ ":gmock_config" ] |
| } |
| |
| group("gmock_and_gtest") { |
| testonly = true |
| public_deps = [ |
| ":gmock", |
| ":gtest", |
| ] |
| } |
| } else { |
| # When we are in Chromium we reuse its targets, and also add some deps that |
| # are needed to launch the test in swarming mode. |
| group("gmock_and_gtest") { |
| testonly = true |
| public_deps = [ |
| "//base", |
| "//base/test:test_support", |
| "//testing/gmock", |
| "//testing/gtest", |
| ] |
| } |
| } |
| |
| ############################################################################### |
| # Wrapping of Chromium targets |
| ############################################################################### |
| |
| # These targets are separated because they are Chromium sources files that |
| # can't use the dawn_internal config, otherwise Dawn's warning flags get |
| # applied while compiling a bunch of Chromium's //base (via header inclusion) |
| if (build_with_chromium) { |
| source_set("unittests_main") { |
| testonly = true |
| deps = [ ":gmock_and_gtest" ] |
| sources = [ "//gpu/dawn_unittests_main.cc" ] |
| } |
| source_set("end2end_tests_main") { |
| testonly = true |
| deps = [ ":gmock_and_gtest" ] |
| sources = [ "//gpu/dawn_end2end_tests_main.cc" ] |
| } |
| source_set("perf_tests_main") { |
| testonly = true |
| deps = [ ":gmock_and_gtest" ] |
| sources = [ "//gpu/dawn_perf_tests_main.cc" ] |
| } |
| } |
| |
| ############################################################################### |
| # Copy target for DXC |
| ############################################################################### |
| |
| # When building with chromium under Windows, we need to copy the DXC from |
| # Windows SDK into build folder, in order to ensure a DXC of verison 1.6 is |
| # avaliable when running end-to-end tests in Chromium. Note that currently DXC |
| # only provided for x86 and x64 in Windows SDK 20348. |
| if (!dawn_use_built_dxc && build_with_chromium && is_win && |
| (target_cpu == "x64" || target_cpu == "x86")) { |
| # The windows_sdk_path is acquired in visual_studio_version.gni. |
| import("//build/config/win/visual_studio_version.gni") |
| |
| # Windows 10 SDK version 10.0.20348.0 provides DXC compiler and validator both |
| # of v1.6 and Chromium builds require this SDK version or higher. |
| assert(defined(windows_sdk_path)) |
| assert(defined(windows_sdk_version)) |
| assert(windows_sdk_path != "") |
| assert(windows_sdk_version != "") |
| |
| # Declare a copy target to copy DXC binary from Windows SDK for running Dawn |
| # end-to-end test in Chromium. |
| copy("copy_dxc_binary") { |
| sources = [ |
| "$windows_sdk_path/bin/$windows_sdk_version/$target_cpu/dxc.exe", |
| "$windows_sdk_path/bin/$windows_sdk_version/$target_cpu/dxcompiler.dll", |
| "$windows_sdk_path/bin/$windows_sdk_version/$target_cpu/dxil.dll", |
| ] |
| |
| outputs = [ "$root_out_dir/{{source_file_part}}" ] |
| } |
| } |
| |
| ############################################################################### |
| # Dawn test template |
| ############################################################################### |
| template("dawn_test") { |
| test(target_name) { |
| # Copy all variables except "configs", which has a default value |
| forward_variables_from(invoker, "*", [ "configs" ]) |
| if (defined(invoker.configs)) { |
| configs += invoker.configs |
| } |
| |
| configs += [ "${dawn_root}/src/dawn/common:internal_config" ] |
| |
| # Running Dawn tests within Chromium in Windows may require DXC, copy DXC |
| # binary from Windows SDK. |
| if (build_with_chromium && is_win && |
| (target_cpu == "x64" || target_cpu == "x86")) { |
| if (dawn_use_built_dxc) { |
| if (!defined(deps)) { |
| deps = [] |
| } |
| deps += [ |
| "$dawn_root/third_party/gn/dxc:copy_dxil_dll", |
| "$dawn_root/third_party/gn/dxc:dxc", |
| "$dawn_root/third_party/gn/dxc:dxcompiler", |
| ] |
| } else { |
| if (!defined(data_deps)) { |
| data_deps = [] |
| } |
| data_deps += [ ":copy_dxc_binary" ] |
| } |
| } |
| } |
| } |
| |
| ############################################################################### |
| # Dawn unittests |
| ############################################################################### |
| |
| dawn_json_generator("mock_webgpu_gen") { |
| target = "mock_api" |
| outputs = [ |
| "src/dawn/mock_webgpu.h", |
| "src/dawn/mock_webgpu.cpp", |
| ] |
| } |
| |
| # Source code for mocks used for unit testing are separated from the rest of |
| # sources so that they aren't included in non-test builds. |
| source_set("native_mocks_sources") { |
| testonly = true |
| |
| deps = [ |
| ":gmock_and_gtest", |
| "${dawn_root}/src/dawn:proc", |
| "${dawn_root}/src/dawn/native:sources", |
| "${dawn_root}/src/dawn/native:static", |
| "${dawn_root}/src/dawn/utils", |
| ] |
| |
| # Add internal dawn native config for internal unittests. |
| configs += [ "${dawn_root}/src/dawn/native:internal" ] |
| |
| sources = [ |
| "unittests/native/mocks/BindGroupLayoutMock.cpp", |
| "unittests/native/mocks/BindGroupLayoutMock.h", |
| "unittests/native/mocks/BindGroupMock.cpp", |
| "unittests/native/mocks/BindGroupMock.h", |
| "unittests/native/mocks/BufferMock.cpp", |
| "unittests/native/mocks/BufferMock.h", |
| "unittests/native/mocks/CommandBufferMock.cpp", |
| "unittests/native/mocks/CommandBufferMock.h", |
| "unittests/native/mocks/ComputePipelineMock.cpp", |
| "unittests/native/mocks/ComputePipelineMock.h", |
| "unittests/native/mocks/DawnMockTest.cpp", |
| "unittests/native/mocks/DawnMockTest.h", |
| "unittests/native/mocks/DeviceMock.cpp", |
| "unittests/native/mocks/DeviceMock.h", |
| "unittests/native/mocks/ExternalTextureMock.cpp", |
| "unittests/native/mocks/ExternalTextureMock.h", |
| "unittests/native/mocks/PipelineLayoutMock.cpp", |
| "unittests/native/mocks/PipelineLayoutMock.h", |
| "unittests/native/mocks/QuerySetMock.cpp", |
| "unittests/native/mocks/QuerySetMock.h", |
| "unittests/native/mocks/QueueMock.cpp", |
| "unittests/native/mocks/QueueMock.h", |
| "unittests/native/mocks/RenderPipelineMock.cpp", |
| "unittests/native/mocks/RenderPipelineMock.h", |
| "unittests/native/mocks/SamplerMock.cpp", |
| "unittests/native/mocks/SamplerMock.h", |
| "unittests/native/mocks/ShaderModuleMock.cpp", |
| "unittests/native/mocks/ShaderModuleMock.h", |
| "unittests/native/mocks/SwapChainMock.cpp", |
| "unittests/native/mocks/SwapChainMock.h", |
| "unittests/native/mocks/TextureMock.cpp", |
| "unittests/native/mocks/TextureMock.h", |
| ] |
| } |
| |
| dawn_test("dawn_unittests") { |
| deps = [ |
| ":gmock_and_gtest", |
| ":mock_webgpu_gen", |
| ":native_mocks_sources", |
| ":platform_mocks_sources", |
| "${dawn_root}/src/dawn:cpp", |
| "${dawn_root}/src/dawn:proc", |
| "${dawn_root}/src/dawn/common", |
| "${dawn_root}/src/dawn/native:sources", |
| "${dawn_root}/src/dawn/native:static", |
| "${dawn_root}/src/dawn/utils", |
| "${dawn_root}/src/dawn/wire", |
| ] |
| |
| # Add internal dawn native config for internal unittests. |
| configs = [ "${dawn_root}/src/dawn/native:internal" ] |
| |
| # Add Tint public+common configs so <tint/tint.h> can be included to test |
| # the Dawn/Tint boundary. |
| configs += [ |
| "${dawn_root}/src/tint:tint_public_config", |
| "${dawn_root}/src/tint:tint_common_config", |
| ] |
| |
| sources = get_target_outputs(":mock_webgpu_gen") |
| sources += [ |
| "${dawn_root}/src/dawn/wire/client/ClientMemoryTransferService_mock.cpp", |
| "${dawn_root}/src/dawn/wire/client/ClientMemoryTransferService_mock.h", |
| "${dawn_root}/src/dawn/wire/server/ServerMemoryTransferService_mock.cpp", |
| "${dawn_root}/src/dawn/wire/server/ServerMemoryTransferService_mock.h", |
| "DawnNativeTest.cpp", |
| "DawnNativeTest.h", |
| "MockCallback.h", |
| "ToggleParser.cpp", |
| "ToggleParser.h", |
| "unittests/AsyncTaskTests.cpp", |
| "unittests/BitSetIteratorTests.cpp", |
| "unittests/BuddyAllocatorTests.cpp", |
| "unittests/BuddyMemoryAllocatorTests.cpp", |
| "unittests/ChainUtilsTests.cpp", |
| "unittests/CommandAllocatorTests.cpp", |
| "unittests/ConcurrentCacheTests.cpp", |
| "unittests/ContentLessObjectCacheTests.cpp", |
| "unittests/EnumClassBitmasksTests.cpp", |
| "unittests/EnumMaskIteratorTests.cpp", |
| "unittests/ErrorTests.cpp", |
| "unittests/FeatureTests.cpp", |
| "unittests/GPUInfoTests.cpp", |
| "unittests/GetProcAddressTests.cpp", |
| "unittests/ITypArrayTests.cpp", |
| "unittests/ITypBitsetTests.cpp", |
| "unittests/ITypSpanTests.cpp", |
| "unittests/ITypVectorTests.cpp", |
| "unittests/LimitsTests.cpp", |
| "unittests/LinkedListTests.cpp", |
| "unittests/MathTests.cpp", |
| "unittests/MutexTests.cpp", |
| "unittests/NumericTests.cpp", |
| "unittests/ObjectBaseTests.cpp", |
| "unittests/PerStageTests.cpp", |
| "unittests/PerThreadProcTests.cpp", |
| "unittests/PlacementAllocatedTests.cpp", |
| "unittests/RefBaseTests.cpp", |
| "unittests/RefCountedTests.cpp", |
| "unittests/ResultTests.cpp", |
| "unittests/RingBufferAllocatorTests.cpp", |
| "unittests/SerialMapTests.cpp", |
| "unittests/SerialQueueTests.cpp", |
| "unittests/SlabAllocatorTests.cpp", |
| "unittests/StackContainerTests.cpp", |
| "unittests/SubresourceStorageTests.cpp", |
| "unittests/SystemUtilsTests.cpp", |
| "unittests/ToBackendTests.cpp", |
| "unittests/ToggleTests.cpp", |
| "unittests/TypedIntegerTests.cpp", |
| "unittests/UnicodeTests.cpp", |
| "unittests/WeakRefTests.cpp", |
| "unittests/native/AllowedErrorTests.cpp", |
| "unittests/native/BlobTests.cpp", |
| "unittests/native/CacheRequestTests.cpp", |
| "unittests/native/CommandBufferEncodingTests.cpp", |
| "unittests/native/CreatePipelineAsyncTaskTests.cpp", |
| "unittests/native/DestroyObjectTests.cpp", |
| "unittests/native/DeviceAsyncTaskTests.cpp", |
| "unittests/native/DeviceCreationTests.cpp", |
| "unittests/native/ObjectContentHasherTests.cpp", |
| "unittests/native/StreamTests.cpp", |
| "unittests/validation/BindGroupValidationTests.cpp", |
| "unittests/validation/BufferValidationTests.cpp", |
| "unittests/validation/CommandBufferValidationTests.cpp", |
| "unittests/validation/CompatValidationTests.cpp", |
| "unittests/validation/ComputeIndirectValidationTests.cpp", |
| "unittests/validation/ComputeValidationTests.cpp", |
| "unittests/validation/CopyCommandsValidationTests.cpp", |
| "unittests/validation/CopyTextureForBrowserTests.cpp", |
| "unittests/validation/DebugMarkerValidationTests.cpp", |
| "unittests/validation/DeviceValidationTests.cpp", |
| "unittests/validation/DrawIndirectValidationTests.cpp", |
| "unittests/validation/DrawVertexAndIndexBufferOOBValidationTests.cpp", |
| "unittests/validation/DynamicStateCommandValidationTests.cpp", |
| "unittests/validation/ErrorScopeValidationTests.cpp", |
| "unittests/validation/ExternalTextureTests.cpp", |
| "unittests/validation/GetBindGroupLayoutValidationTests.cpp", |
| "unittests/validation/IndexBufferValidationTests.cpp", |
| "unittests/validation/InternalUsageValidationTests.cpp", |
| "unittests/validation/LabelTests.cpp", |
| "unittests/validation/MinimumBufferSizeValidationTests.cpp", |
| "unittests/validation/MultipleDeviceTests.cpp", |
| "unittests/validation/OverridableConstantsValidationTests.cpp", |
| "unittests/validation/PipelineAndPassCompatibilityTests.cpp", |
| "unittests/validation/QueryValidationTests.cpp", |
| "unittests/validation/QueueOnSubmittedWorkDoneValidationTests.cpp", |
| "unittests/validation/QueueSubmitValidationTests.cpp", |
| "unittests/validation/QueueWriteBufferValidationTests.cpp", |
| "unittests/validation/QueueWriteTextureValidationTests.cpp", |
| "unittests/validation/RenderBundleValidationTests.cpp", |
| "unittests/validation/RenderPassDescriptorValidationTests.cpp", |
| "unittests/validation/RenderPipelineValidationTests.cpp", |
| "unittests/validation/ResourceUsageTrackingTests.cpp", |
| "unittests/validation/SamplerValidationTests.cpp", |
| "unittests/validation/ShaderModuleValidationTests.cpp", |
| "unittests/validation/StorageTextureValidationTests.cpp", |
| "unittests/validation/TextureSubresourceTests.cpp", |
| "unittests/validation/TextureValidationTests.cpp", |
| "unittests/validation/TextureViewValidationTests.cpp", |
| "unittests/validation/ToggleValidationTests.cpp", |
| "unittests/validation/UnsafeAPIValidationTests.cpp", |
| "unittests/validation/ValidationTest.cpp", |
| "unittests/validation/ValidationTest.h", |
| "unittests/validation/VertexBufferValidationTests.cpp", |
| "unittests/validation/VertexStateValidationTests.cpp", |
| "unittests/validation/WritableBufferBindingAliasingValidationTests.cpp", |
| "unittests/validation/WritableTextureBindingAliasingValidationTests.cpp", |
| "unittests/validation/WriteBufferTests.cpp", |
| "unittests/wire/WireAdapterTests.cpp", |
| "unittests/wire/WireArgumentTests.cpp", |
| "unittests/wire/WireBasicTests.cpp", |
| "unittests/wire/WireBufferMappingTests.cpp", |
| "unittests/wire/WireCreatePipelineAsyncTests.cpp", |
| "unittests/wire/WireDeviceLifetimeTests.cpp", |
| "unittests/wire/WireDisconnectTests.cpp", |
| "unittests/wire/WireErrorCallbackTests.cpp", |
| "unittests/wire/WireExtensionTests.cpp", |
| "unittests/wire/WireInjectDeviceTests.cpp", |
| "unittests/wire/WireInjectInstanceTests.cpp", |
| "unittests/wire/WireInjectSwapChainTests.cpp", |
| "unittests/wire/WireInjectTextureTests.cpp", |
| "unittests/wire/WireInstanceTests.cpp", |
| "unittests/wire/WireMemoryTransferServiceTests.cpp", |
| "unittests/wire/WireOptionalTests.cpp", |
| "unittests/wire/WireQueueTests.cpp", |
| "unittests/wire/WireShaderModuleTests.cpp", |
| "unittests/wire/WireTest.cpp", |
| "unittests/wire/WireTest.h", |
| ] |
| |
| if (is_win) { |
| sources += [ "unittests/WindowsUtilsTests.cpp" ] |
| } |
| |
| if (dawn_enable_d3d12) { |
| sources += [ "unittests/d3d12/CopySplitTests.cpp" ] |
| } |
| |
| # When building inside Chromium, use their gtest main function because it is |
| # needed to run in swarming correctly. |
| if (build_with_chromium) { |
| deps += [ ":unittests_main" ] |
| } else { |
| sources += [ "UnittestsMain.cpp" ] |
| } |
| } |
| |
| ############################################################################### |
| # Dawn test infrastructure targets |
| ############################################################################### |
| |
| source_set("test_infra_sources") { |
| configs += [ "${dawn_root}/src/dawn/native:internal" ] |
| testonly = true |
| |
| deps = [ |
| "${dawn_root}/src/dawn:cpp", |
| "${dawn_root}/src/dawn:proc", |
| "${dawn_root}/src/dawn/common", |
| "${dawn_root}/src/dawn/native:sources", |
| "${dawn_root}/src/dawn/native:static", |
| "${dawn_root}/src/dawn/utils", |
| "${dawn_root}/src/dawn/wire", |
| ] |
| |
| public_deps = [ ":gmock_and_gtest" ] |
| |
| if (dawn_supports_glfw_for_windowing || dawn_enable_opengl) { |
| assert(dawn_supports_glfw_for_windowing) |
| public_deps += [ "${dawn_root}/src/dawn/glfw" ] |
| } |
| |
| sources = [ |
| "AdapterTestConfig.cpp", |
| "AdapterTestConfig.h", |
| "DawnTest.cpp", |
| "DawnTest.h", |
| "MockCallback.h", |
| "ParamGenerator.h", |
| "ToggleParser.cpp", |
| "ToggleParser.h", |
| ] |
| } |
| |
| ############################################################################### |
| # Dawn end2end tests targets |
| ############################################################################### |
| |
| # Source code for mocks used for platform testing are separated from the rest of |
| # sources so that they aren't included in non-test builds. |
| source_set("platform_mocks_sources") { |
| configs += [ "${dawn_root}/src/dawn/native:internal" ] |
| testonly = true |
| |
| deps = [ |
| ":gmock_and_gtest", |
| "${dawn_root}/src/dawn/common", |
| "${dawn_root}/src/dawn/platform", |
| ] |
| |
| sources = [ |
| "mocks/platform/CachingInterfaceMock.cpp", |
| "mocks/platform/CachingInterfaceMock.h", |
| ] |
| } |
| |
| source_set("end2end_tests_sources") { |
| testonly = true |
| |
| deps = [ |
| ":platform_mocks_sources", |
| ":test_infra_sources", |
| "${dawn_root}/src/dawn:cpp", |
| "${dawn_root}/src/dawn:proc", |
| "${dawn_root}/src/dawn/common", |
| "${dawn_root}/src/dawn/native:headers", |
| "${dawn_root}/src/dawn/platform", |
| "${dawn_root}/src/dawn/utils", |
| "${dawn_root}/src/dawn/wire", |
| ] |
| |
| sources = [ |
| "end2end/AdapterCreationTests.cpp", |
| "end2end/BasicTests.cpp", |
| "end2end/BindGroupTests.cpp", |
| "end2end/BufferTests.cpp", |
| "end2end/BufferZeroInitTests.cpp", |
| "end2end/ClipSpaceTests.cpp", |
| "end2end/ColorStateTests.cpp", |
| "end2end/CommandEncoderTests.cpp", |
| "end2end/CompressedTextureFormatTests.cpp", |
| "end2end/ComputeCopyStorageBufferTests.cpp", |
| "end2end/ComputeDispatchTests.cpp", |
| "end2end/ComputeFlowControlTests.cpp", |
| "end2end/ComputeLayoutMemoryBufferTests.cpp", |
| "end2end/ComputeSharedMemoryTests.cpp", |
| "end2end/ComputeStorageBufferBarrierTests.cpp", |
| "end2end/CopyExternalTextureForBrowserTests.cpp", |
| "end2end/CopyTests.cpp", |
| "end2end/CopyTextureForBrowserTests.cpp", |
| "end2end/CreatePipelineAsyncTests.cpp", |
| "end2end/CullingTests.cpp", |
| "end2end/DebugMarkerTests.cpp", |
| "end2end/DepthBiasTests.cpp", |
| "end2end/DepthStencilCopyTests.cpp", |
| "end2end/DepthStencilLoadOpTests.cpp", |
| "end2end/DepthStencilSamplingTests.cpp", |
| "end2end/DepthStencilStateTests.cpp", |
| "end2end/DestroyTests.cpp", |
| "end2end/DeviceInitializationTests.cpp", |
| "end2end/DeviceLifetimeTests.cpp", |
| "end2end/DeviceLostTests.cpp", |
| "end2end/DrawIndexedIndirectTests.cpp", |
| "end2end/DrawIndexedTests.cpp", |
| "end2end/DrawIndirectTests.cpp", |
| "end2end/DrawTests.cpp", |
| "end2end/DynamicBufferOffsetTests.cpp", |
| "end2end/EntryPointTests.cpp", |
| "end2end/ExperimentalDP4aTests.cpp", |
| "end2end/ExternalTextureTests.cpp", |
| "end2end/FirstIndexOffsetTests.cpp", |
| "end2end/FragDepthTests.cpp", |
| "end2end/GpuMemorySynchronizationTests.cpp", |
| "end2end/HistogramTests.cpp", |
| "end2end/IndexFormatTests.cpp", |
| "end2end/MaxLimitTests.cpp", |
| "end2end/MemoryAllocationStressTests.cpp", |
| "end2end/MultisampledRenderingTests.cpp", |
| "end2end/MultisampledSamplingTests.cpp", |
| "end2end/MultithreadTests.cpp", |
| "end2end/NonzeroBufferCreationTests.cpp", |
| "end2end/NonzeroTextureCreationTests.cpp", |
| "end2end/ObjectCachingTests.cpp", |
| "end2end/OpArrayLengthTests.cpp", |
| "end2end/PhysicalDeviceDiscoveryTests.cpp", |
| "end2end/PipelineCachingTests.cpp", |
| "end2end/PipelineLayoutTests.cpp", |
| "end2end/PrimitiveStateTests.cpp", |
| "end2end/PrimitiveTopologyTests.cpp", |
| "end2end/QueryTests.cpp", |
| "end2end/QueueTests.cpp", |
| "end2end/QueueTimelineTests.cpp", |
| "end2end/ReadOnlyDepthStencilAttachmentTests.cpp", |
| "end2end/RenderAttachmentTests.cpp", |
| "end2end/RenderBundleTests.cpp", |
| "end2end/RenderPassLoadOpTests.cpp", |
| "end2end/RenderPassTests.cpp", |
| "end2end/RequiredBufferSizeInCopyTests.cpp", |
| "end2end/SamplerFilterAnisotropicTests.cpp", |
| "end2end/SamplerTests.cpp", |
| "end2end/ScissorTests.cpp", |
| "end2end/ShaderF16Tests.cpp", |
| "end2end/ShaderTests.cpp", |
| "end2end/ShaderValidationTests.cpp", |
| "end2end/StorageTextureTests.cpp", |
| "end2end/SubresourceRenderAttachmentTests.cpp", |
| "end2end/Texture3DTests.cpp", |
| "end2end/TextureCorruptionTests.cpp", |
| "end2end/TextureFormatTests.cpp", |
| "end2end/TextureSubresourceTests.cpp", |
| "end2end/TextureViewTests.cpp", |
| "end2end/TextureZeroInitTests.cpp", |
| "end2end/VertexFormatTests.cpp", |
| "end2end/VertexOnlyRenderPipelineTests.cpp", |
| "end2end/VertexStateTests.cpp", |
| "end2end/ViewportOrientationTests.cpp", |
| "end2end/ViewportTests.cpp", |
| ] |
| |
| libs = [] |
| |
| if (dawn_enable_d3d11 || dawn_enable_d3d12) { |
| libs += [ |
| "d3d11.lib", |
| "dxgi.lib", |
| ] |
| |
| sources += [ |
| "end2end/D3DResourceWrappingTests.cpp", |
| "end2end/VideoViewsTests_win.cpp", |
| ] |
| } |
| |
| if (dawn_enable_d3d12) { |
| sources += [ "end2end/D3D12CachingTests.cpp" ] |
| } |
| |
| if (dawn_enable_metal) { |
| sources += [ |
| "end2end/IOSurfaceWrappingTests.cpp", |
| "end2end/VideoViewsTests_mac.cpp", |
| ] |
| frameworks = [ "IOSurface.framework" ] |
| } |
| |
| if (dawn_supports_glfw_for_windowing) { |
| sources += [ |
| "end2end/SwapChainTests.cpp", |
| "end2end/SwapChainValidationTests.cpp", |
| "end2end/WindowSurfaceTests.cpp", |
| ] |
| } |
| |
| if (dawn_enable_d3d11 || dawn_enable_d3d12 || |
| (dawn_enable_vulkan && is_chromeos) || dawn_enable_metal) { |
| sources += [ |
| "end2end/VideoViewsTests.cpp", |
| "end2end/VideoViewsTests.h", |
| ] |
| } |
| |
| if (dawn_enable_vulkan && is_chromeos) { |
| sources += [ "end2end/VideoViewsTests_gbm.cpp" ] |
| } |
| } |
| |
| source_set("white_box_tests_sources") { |
| configs += [ "${dawn_root}/src/dawn/native:internal" ] |
| testonly = true |
| |
| deps = [ |
| ":test_infra_sources", |
| "${dawn_root}/src/dawn:cpp", |
| "${dawn_root}/src/dawn:proc", |
| "${dawn_root}/src/dawn/common", |
| |
| # Statically linked and with sources because the end2end white_box tests use Dawn internals. |
| "${dawn_root}/src/dawn/native:sources", |
| "${dawn_root}/src/dawn/native:static", |
| "${dawn_root}/src/dawn/utils", |
| "${dawn_root}/src/dawn/wire", |
| ] |
| |
| sources = [] |
| |
| if (dawn_enable_vulkan) { |
| deps += [ "${dawn_vulkan_headers_dir}:vulkan_headers" ] |
| |
| if (is_chromeos) { |
| sources += [ |
| "white_box/VulkanImageWrappingTests.cpp", |
| "white_box/VulkanImageWrappingTests.h", |
| "white_box/VulkanImageWrappingTests_DmaBuf.cpp", |
| ] |
| } else if (is_linux) { |
| sources += [ |
| "white_box/VulkanImageWrappingTests.cpp", |
| "white_box/VulkanImageWrappingTests.h", |
| "white_box/VulkanImageWrappingTests_OpaqueFD.cpp", |
| ] |
| } |
| |
| if (dawn_enable_error_injection) { |
| sources += [ "white_box/VulkanErrorInjectorTests.cpp" ] |
| } |
| } |
| |
| sources += [ |
| "white_box/BufferAllocatedSizeTests.cpp", |
| "white_box/InternalResolveAttachmentSampleTypeTests.cpp", |
| "white_box/InternalResourceUsageTests.cpp", |
| "white_box/InternalStorageBufferBindingTests.cpp", |
| "white_box/QueryInternalShaderTests.cpp", |
| ] |
| |
| if (dawn_enable_d3d11) { |
| sources += [ "white_box/D3D11BufferTests.cpp" ] |
| } |
| |
| if (dawn_enable_d3d12) { |
| sources += [ |
| "white_box/D3D12DescriptorHeapTests.cpp", |
| "white_box/D3D12ResidencyTests.cpp", |
| "white_box/D3D12ResourceHeapTests.cpp", |
| "white_box/GPUTimestampCalibrationTests.cpp", |
| "white_box/GPUTimestampCalibrationTests.h", |
| "white_box/GPUTimestampCalibrationTests_D3D12.cpp", |
| ] |
| } |
| |
| if (dawn_enable_metal) { |
| sources += [ |
| "white_box/GPUTimestampCalibrationTests.cpp", |
| "white_box/GPUTimestampCalibrationTests.h", |
| "white_box/GPUTimestampCalibrationTests_Metal.mm", |
| "white_box/MetalAutoreleasePoolTests.mm", |
| ] |
| } |
| |
| if (dawn_enable_opengles) { |
| sources += [ "white_box/EGLImageWrappingTests.cpp" ] |
| include_dirs = [ "//third_party/khronos" ] |
| } |
| |
| libs = [] |
| } |
| |
| dawn_test("dawn_end2end_tests") { |
| deps = [ |
| ":end2end_tests_sources", |
| ":test_infra_sources", |
| ":white_box_tests_sources", |
| ] |
| |
| sources = [] |
| libs = [] |
| |
| # When building inside Chromium, use their gtest main function because it is |
| # needed to run in swarming correctly. |
| if (build_with_chromium) { |
| deps += [ ":end2end_tests_main" ] |
| } else { |
| sources += [ "End2EndTestsMain.cpp" ] |
| } |
| |
| if (is_chromeos) { |
| libs += [ "gbm" ] |
| } |
| } |
| |
| ############################################################################### |
| # Dawn perf tests |
| ############################################################################### |
| |
| dawn_test("dawn_perf_tests") { |
| deps = [ |
| ":test_infra_sources", |
| "${dawn_root}/src/dawn:cpp", |
| "${dawn_root}/src/dawn:proc", |
| "${dawn_root}/src/dawn/common", |
| "${dawn_root}/src/dawn/platform", |
| "${dawn_root}/src/dawn/utils", |
| "${dawn_root}/src/dawn/wire", |
| ] |
| |
| sources = [ |
| "perf_tests/BufferUploadPerf.cpp", |
| "perf_tests/DawnPerfTest.cpp", |
| "perf_tests/DawnPerfTest.h", |
| "perf_tests/DawnPerfTestPlatform.cpp", |
| "perf_tests/DawnPerfTestPlatform.h", |
| "perf_tests/DrawCallPerf.cpp", |
| "perf_tests/ShaderRobustnessPerf.cpp", |
| "perf_tests/SubresourceTrackingPerf.cpp", |
| "perf_tests/VulkanZeroInitializeWorkgroupMemoryPerf.cpp", |
| ] |
| |
| libs = [] |
| |
| # When building inside Chromium, use their gtest main function and the |
| # other perf test scaffolding in order to run in swarming correctly. |
| if (build_with_chromium) { |
| deps += [ ":perf_tests_main" ] |
| data_deps = [ "//testing:run_perf_test" ] |
| } else { |
| sources += [ "PerfTestsMain.cpp" ] |
| } |
| |
| if (dawn_enable_metal) { |
| frameworks = [ "IOSurface.framework" ] |
| } |
| } |