src/reader/wgsl/lexer.cc

// Copyright 2020 The Tint Authors.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#include "src/reader/wgsl/lexer.h"

#include <cctype>
#include <cmath>
#include <cstring>
#include <limits>
#include <utility>

#include "src/debug.h"

namespace tint {
namespace reader {
namespace wgsl {
namespace {

bool is_whitespace(char c) {
  return std::isspace(c);
}

uint32_t dec_value(char c) {
  if (c >= '0' && c <= '9') {
    return static_cast<uint32_t>(c - '0');
  }
  return 0;
}

uint32_t hex_value(char c) {
  if (c >= '0' && c <= '9') {
    return static_cast<uint32_t>(c - '0');
  }
  if (c >= 'a' && c <= 'f') {
    return 0xA + static_cast<uint32_t>(c - 'a');
  }
  if (c >= 'A' && c <= 'F') {
    return 0xA + static_cast<uint32_t>(c - 'A');
  }
  return 0;
}

}  // namespace

Lexer::Lexer(const Source::File* file)
    : file_(file),
      len_(static_cast<uint32_t>(file->content.data.size())),
      location_{1, 1} {}

Lexer::~Lexer() = default;

Token Lexer::next() {
  if (auto t = skip_whitespace_and_comments(); !t.IsUninitialized()) {
    return t;
  }

  if (auto t = try_hex_float(); !t.IsUninitialized()) {
    return t;
  }

  if (auto t = try_hex_integer(); !t.IsUninitialized()) {
    return t;
  }

  if (auto t = try_float(); !t.IsUninitialized()) {
    return t;
  }

  if (auto t = try_integer(); !t.IsUninitialized()) {
    return t;
  }

  if (auto t = try_ident(); !t.IsUninitialized()) {
    return t;
  }

  if (auto t = try_punctuation(); !t.IsUninitialized()) {
    return t;
  }

  return {Token::Type::kError, begin_source(),
          (is_null() ? "null character found" : "invalid character found")};
}

Source Lexer::begin_source() const {
  Source src{};
  src.file = file_;
  src.range.begin = location_;
  src.range.end = location_;
  return src;
}

void Lexer::end_source(Source& src) const {
  src.range.end = location_;
}

bool Lexer::is_eof() const {
  return pos_ >= len_;
}

bool Lexer::is_null() const {
  return (pos_ < len_) && (file_->content.data[pos_] == 0);
}

bool Lexer::is_alpha(char ch) const {
  return std::isalpha(ch);
}

bool Lexer::is_digit(char ch) const {
  return std::isdigit(ch);
}

bool Lexer::is_alphanum_underscore(char ch) const {
  return is_alpha(ch) || is_digit(ch) || ch == '_';
}

bool Lexer::is_hex(char ch) const {
  return std::isxdigit(ch);
}

bool Lexer::matches(size_t pos, std::string_view substr) {
  if (pos >= len_)
    return false;
  return file_->content.data_view.substr(pos, substr.size()) == substr;
}

Token Lexer::skip_whitespace_and_comments() {
  for (;;) {
    auto pos = pos_;
    while (!is_eof() && is_whitespace(file_->content.data[pos_])) {
      if (matches(pos_, "\n")) {
        pos_++;
        location_.line++;
        location_.column = 1;
        continue;
      }

      pos_++;
      location_.column++;
    }

    auto t = skip_comment();
    if (!t.IsUninitialized()) {
      return t;
    }

    // If the cursor didn't advance we didn't remove any whitespace
    // so we're done.
    if (pos == pos_)
      break;
  }
  if (is_eof()) {
    return {Token::Type::kEOF, begin_source()};
  }

  return {};
}

Token Lexer::skip_comment() {
  if (matches(pos_, "//")) {
    // Line comment: ignore everything until the end of line
    // or end of input.
    while (!is_eof() && !matches(pos_, "\n")) {
      if (is_null()) {
        return {Token::Type::kError, begin_source(), "null character found"};
      }
      pos_++;
      location_.column++;
    }
    return {};
  }

  if (matches(pos_, "/*")) {
    // Block comment: ignore everything until the closing '*/' token.

    // Record source location of the initial '/*'
    auto source = begin_source();
    source.range.end.column += 1;

    pos_ += 2;
    location_.column += 2;

    int depth = 1;
    while (!is_eof() && depth > 0) {
      if (matches(pos_, "/*")) {
        // Start of block comment: increase nesting depth.
        pos_ += 2;
        location_.column += 2;
        depth++;
      } else if (matches(pos_, "*/")) {
        // End of block comment: decrease nesting depth.
        pos_ += 2;
        location_.column += 2;
        depth--;
      } else if (matches(pos_, "\n")) {
        // Newline: skip and update source location.
        pos_++;
        location_.line++;
        location_.column = 1;
      } else if (is_null()) {
        return {Token::Type::kError, begin_source(), "null character found"};
      } else {
        // Anything else: skip and update source location.
        pos_++;
        location_.column++;
      }
    }
    if (depth > 0) {
      return {Token::Type::kError, source, "unterminated block comment"};
    }
  }
  return {};
}

Token Lexer::try_float() {
  auto start = pos_;
  auto end = pos_;

  auto source = begin_source();
  bool has_mantissa_digits = false;

  if (matches(end, "-")) {
    end++;
  }
  while (end < len_ && is_digit(file_->content.data[end])) {
    has_mantissa_digits = true;
    end++;
  }

  bool has_point = false;
  if (end < len_ && matches(end, ".")) {
    has_point = true;
    end++;
  }

  while (end < len_ && is_digit(file_->content.data[end])) {
    has_mantissa_digits = true;
    end++;
  }

  if (!has_mantissa_digits) {
    return {};
  }

  // Parse the exponent if one exists
  bool has_exponent = false;
  if (end < len_ && (matches(end, "e") || matches(end, "E"))) {
    end++;
    if (end < len_ && (matches(end, "+") || matches(end, "-"))) {
      end++;
    }

    while (end < len_ && isdigit(file_->content.data[end])) {
      has_exponent = true;
      end++;
    }

    // If an 'e' or 'E' was present, then the number part must also be present.
    if (!has_exponent) {
      const auto str = file_->content.data.substr(start, end - start);
      return {Token::Type::kError, source,
              "incomplete exponent for floating point literal: " + str};
    }
  }

  bool has_f_suffix = false;
  if (end < len_ && matches(end, "f")) {
    end++;
    has_f_suffix = true;
  }

  if (!has_point && !has_exponent && !has_f_suffix) {
    // If it only has digits then it's an integer.
    return {};
  }

  // Save the error string, for use by diagnostics.
  const auto str = file_->content.data.substr(start, end - start);

  pos_ = end;
  location_.column += (end - start);

  end_source(source);

  auto res = strtod(file_->content.data.c_str() + start, nullptr);
  // This errors out if a non-zero magnitude is too small to represent in a
  // float. It can't be represented faithfully in an f32.
  const auto magnitude = std::fabs(res);
  if (0.0 < magnitude &&
      magnitude < static_cast<double>(std::numeric_limits<float>::min())) {
    return {Token::Type::kError, source,
            "f32 (" + str + ") magnitude too small, not representable"};
  }
  // This handles if the number is really large negative number
  if (res < static_cast<double>(std::numeric_limits<float>::lowest())) {
    return {Token::Type::kError, source,
            "f32 (" + str + ") too large (negative)"};
  }
  if (res > static_cast<double>(std::numeric_limits<float>::max())) {
    return {Token::Type::kError, source,
            "f32 (" + str + ") too large (positive)"};
  }

  return {source, static_cast<float>(res)};
}

Token Lexer::try_hex_float() {
  constexpr uint32_t kTotalBits = 32;
  constexpr uint32_t kTotalMsb = kTotalBits - 1;
  constexpr uint32_t kMantissaBits = 23;
  constexpr uint32_t kMantissaMsb = kMantissaBits - 1;
  constexpr uint32_t kMantissaShiftRight = kTotalBits - kMantissaBits;
  constexpr int32_t kExponentBias = 127;
  constexpr int32_t kExponentMax = 255;
  constexpr uint32_t kExponentBits = 8;
  constexpr uint32_t kExponentMask = (1 << kExponentBits) - 1;
  constexpr uint32_t kExponentLeftShift = kMantissaBits;
  constexpr uint32_t kSignBit = 31;

  auto start = pos_;
  auto end = pos_;

  auto source = begin_source();

  // clang-format off
  // -?0[xX]([0-9a-fA-F]*.?[0-9a-fA-F]+ | [0-9a-fA-F]+.[0-9a-fA-F]*)(p|P)(+|-)?[0-9]+  // NOLINT
  // clang-format on

  // -?
  int32_t sign_bit = 0;
  if (matches(end, "-")) {
    sign_bit = 1;
    end++;
  }
  // 0[xX]
  if (matches(end, "0x") || matches(end, "0X")) {
    end += 2;
  } else {
    return {};
  }

  uint32_t mantissa = 0;
  uint32_t exponent = 0;

  // TODO(dneto): Values in the normal range for the format do not explicitly
  // store the most significant bit.  The algorithm here works hard to eliminate
  // that bit in the representation during parsing, and then it backtracks
  // when it sees it may have to explicitly represent it, and backtracks again
  // when it sees the number is sub-normal (i.e. the exponent underflows).
  // I suspect the logic can be clarified by storing it during parsing, and
  // then removing it later only when needed.

  // `set_next_mantissa_bit_to` sets next `mantissa` bit starting from msb to
  // lsb to value 1 if `set` is true, 0 otherwise. Returns true on success, i.e.
  // when the bit can be accommodated in the available space.
  uint32_t mantissa_next_bit = kTotalMsb;
  auto set_next_mantissa_bit_to = [&](bool set, bool integer_part) -> bool {
    // If adding bits for the integer part, we can overflow whether we set the
    // bit or not. For the fractional part, we can only overflow when setting
    // the bit.
    const bool check_overflow = integer_part || set;
    // Note: mantissa_next_bit actually decrements, so comparing it as
    // larger than a positive number relies on wraparound.
    if (check_overflow && (mantissa_next_bit > kTotalMsb)) {
      return false;  // Overflowed mantissa
    }
    if (set) {
      mantissa |= (1 << mantissa_next_bit);
    }
    --mantissa_next_bit;
    return true;
  };

  // Collect integer range (if any)
  auto integer_range = std::make_pair(end, end);
  while (end < len_ && is_hex(file_->content.data[end])) {
    integer_range.second = ++end;
  }

  // .?
  bool hex_point = false;
  if (matches(end, ".")) {
    hex_point = true;
    end++;
  }

  // Collect fractional range (if any)
  auto fractional_range = std::make_pair(end, end);
  while (end < len_ && is_hex(file_->content.data[end])) {
    fractional_range.second = ++end;
  }

  // Must have at least an integer or fractional part
  if ((integer_range.first == integer_range.second) &&
      (fractional_range.first == fractional_range.second)) {
    return {};
  }

  // Is the binary exponent present?  It's optional.
  const bool has_exponent = (matches(end, "p") || matches(end, "P"));
  if (has_exponent) {
    end++;
  }
  if (!has_exponent && !hex_point) {
    // It's not a hex float. At best it's a hex integer.
    return {};
  }

  // At this point, we know for sure our token is a hex float value,
  // or an invalid token.

  // Parse integer part
  // [0-9a-fA-F]*

  bool has_zero_integer = true;
  // The magnitude is zero if and only if seen_prior_one_bits is false.
  bool seen_prior_one_bits = false;
  for (auto i = integer_range.first; i < integer_range.second; ++i) {
    const auto nibble = hex_value(file_->content.data[i]);
    if (nibble != 0) {
      has_zero_integer = false;
    }

    for (int32_t bit = 3; bit >= 0; --bit) {
      auto v = 1 & (nibble >> bit);

      // Skip leading 0s and the first 1
      if (seen_prior_one_bits) {
        if (!set_next_mantissa_bit_to(v != 0, true)) {
          return {Token::Type::kError, source,
                  "mantissa is too large for hex float"};
        }
        ++exponent;
      } else {
        if (v == 1) {
          seen_prior_one_bits = true;
        }
      }
    }
  }

  // Parse fractional part
  // [0-9a-fA-F]*
  for (auto i = fractional_range.first; i < fractional_range.second; ++i) {
    auto nibble = hex_value(file_->content.data[i]);
    for (int32_t bit = 3; bit >= 0; --bit) {
      auto v = 1 & (nibble >> bit);

      if (v == 1) {
        seen_prior_one_bits = true;
      }

      // If integer part is 0, we only start writing bits to the
      // mantissa once we have a non-zero fractional bit. While the fractional
      // values are 0, we adjust the exponent to avoid overflowing `mantissa`.
      if (!seen_prior_one_bits) {
        --exponent;
      } else {
        if (!set_next_mantissa_bit_to(v != 0, false)) {
          return {Token::Type::kError, source,
                  "mantissa is too large for hex float"};
        }
      }
    }
  }

  // Determine if the value of the mantissa is zero.
  // Note: it's not enough to check mantissa == 0 as we drop the initial bit,
  // whether it's in the integer part or the fractional part.
  const bool is_zero = !seen_prior_one_bits;
  TINT_ASSERT(Reader, !is_zero || mantissa == 0);

  // Parse the optional exponent.
  // ((p|P)(\+|-)?[0-9]+)?
  uint32_t input_exponent = 0;  // Defaults to 0 if not present
  int32_t exponent_sign = 1;
  // If the 'p' part is present, the rest of the exponent must exist.
  if (has_exponent) {
    // Parse the rest of the exponent.
    // (+|-)?
    if (matches(end, "+")) {
      end++;
    } else if (matches(end, "-")) {
      exponent_sign = -1;
      end++;
    }

    // Parse exponent from input
    // [0-9]+
    // Allow overflow (in uint32_t) when the floating point value magnitude is
    // zero.
    bool has_exponent_digits = false;
    while (end < len_ && isdigit(file_->content.data[end])) {
      has_exponent_digits = true;
      auto prev_exponent = input_exponent;
      input_exponent =
          (input_exponent * 10) + dec_value(file_->content.data[end]);
      // Check if we've overflowed input_exponent. This only matters when
      // the mantissa is non-zero.
      if (!is_zero && (prev_exponent > input_exponent)) {
        return {Token::Type::kError, source,
                "exponent is too large for hex float"};
      }
      end++;
    }

    // Parse optional 'f' suffix.  For a hex float, it can only exist
    // when the exponent is present. Otherwise it will look like
    // one of the mantissa digits.
    if (end < len_ && matches(end, "f")) {
      end++;
    }

    if (!has_exponent_digits) {
      return {Token::Type::kError, source,
              "expected an exponent value for hex float"};
    }
  }

  pos_ = end;
  location_.column += (end - start);
  end_source(source);

  if (is_zero) {
    // If value is zero, then ignore the exponent and produce a zero
    exponent = 0;
  } else {
    // Ensure input exponent is not too large; i.e. that it won't overflow when
    // adding the exponent bias.
    const uint32_t kIntMax =
        static_cast<uint32_t>(std::numeric_limits<int32_t>::max());
    const uint32_t kMaxInputExponent = kIntMax - kExponentBias;
    if (input_exponent > kMaxInputExponent) {
      return {Token::Type::kError, source,
              "exponent is too large for hex float"};
    }

    // Compute exponent so far
    exponent += static_cast<uint32_t>(static_cast<int32_t>(input_exponent) *
                                      exponent_sign);

    // Bias exponent if non-zero
    // After this, if exponent is <= 0, our value is a denormal
    exponent += kExponentBias;

    // We know the number is not zero.  The MSB is 1 (by construction), and
    // should be eliminated because it becomes the implicit 1 that isn't
    // explicitly represented in the binary32 format.  We'll bring it back
    // later if we find the exponent actually underflowed, i.e. the number
    // is sub-normal.
    if (has_zero_integer) {
      mantissa <<= 1;
      --exponent;
    }
  }

  // We can now safely work with exponent as a signed quantity, as there's no
  // chance to overflow
  int32_t signed_exponent = static_cast<int32_t>(exponent);

  // Shift mantissa to occupy the low 23 bits
  mantissa >>= kMantissaShiftRight;

  // If denormal, shift mantissa until our exponent is zero
  if (!is_zero) {
    // Denorm has exponent 0 and non-zero mantissa. We set the top bit here,
    // then shift the mantissa to make exponent zero.
    if (signed_exponent <= 0) {
      mantissa >>= 1;
      mantissa |= (1 << kMantissaMsb);
    }

    while (signed_exponent < 0) {
      mantissa >>= 1;
      ++signed_exponent;

      // If underflow, clamp to zero
      if (mantissa == 0) {
        signed_exponent = 0;
      }
    }
  }

  if (signed_exponent > kExponentMax) {
    // Overflow: set to infinity
    signed_exponent = kExponentMax;
    mantissa = 0;
  } else if (signed_exponent == kExponentMax && mantissa != 0) {
    // NaN: set to infinity
    mantissa = 0;
  }

  // Combine sign, mantissa, and exponent
  uint32_t result_u32 = sign_bit << kSignBit;
  result_u32 |= mantissa;
  result_u32 |= (static_cast<uint32_t>(signed_exponent) & kExponentMask)
                << kExponentLeftShift;

  // Reinterpret as float and return
  float result;
  std::memcpy(&result, &result_u32, sizeof(result));
  return {source, static_cast<float>(result)};
}

Token Lexer::build_token_from_int_if_possible(Source source,
                                              size_t start,
                                              size_t end,
                                              int32_t base) {
  auto res = strtoll(file_->content.data.c_str() + start, nullptr, base);
  if (matches(pos_, "u")) {
    if (static_cast<uint64_t>(res) >
        static_cast<uint64_t>(std::numeric_limits<uint32_t>::max())) {
      return {Token::Type::kError, source,
              "u32 (" + file_->content.data.substr(start, end - start) +
                  ") too large"};
    }
    pos_ += 1;
    location_.column += 1;
    end_source(source);
    return {source, static_cast<uint32_t>(res)};
  }

  if (res < static_cast<int64_t>(std::numeric_limits<int32_t>::min())) {
    return {Token::Type::kError, source,
            "i32 (" + file_->content.data.substr(start, end - start) +
                ") too small"};
  }
  if (res > static_cast<int64_t>(std::numeric_limits<int32_t>::max())) {
    return {Token::Type::kError, source,
            "i32 (" + file_->content.data.substr(start, end - start) +
                ") too large"};
  }
  end_source(source);
  return {source, static_cast<int32_t>(res)};
}

Token Lexer::try_hex_integer() {
  constexpr size_t kMaxDigits = 8;  // Valid for both 32-bit integer types
  auto start = pos_;
  auto end = pos_;

  auto source = begin_source();

  if (matches(end, "-")) {
    end++;
  }

  if (matches(end, "0x") || matches(end, "0X")) {
    end += 2;
  } else {
    return {};
  }

  auto first = end;
  while (!is_eof() && is_hex(file_->content.data[end])) {
    end++;

    auto digits = end - first;
    if (digits > kMaxDigits) {
      return {Token::Type::kError, source,
              "integer literal (" +
                  file_->content.data.substr(start, end - 1 - start) +
                  "...) has too many digits"};
    }
  }
  if (first == end) {
    return {Token::Type::kError, source,
            "integer or float hex literal has no significant digits"};
  }

  pos_ = end;
  location_.column += (end - start);

  return build_token_from_int_if_possible(source, start, end, 16);
}

Token Lexer::try_integer() {
  constexpr size_t kMaxDigits = 10;  // Valid for both 32-bit integer types
  auto start = pos_;
  auto end = start;

  auto source = begin_source();

  if (matches(end, "-")) {
    end++;
  }

  if (end >= len_ || !is_digit(file_->content.data[end])) {
    return {};
  }

  auto first = end;
  // If the first digit is a zero this must only be zero as leading zeros
  // are not allowed.
  auto next = first + 1;
  if (next < len_) {
    if (file_->content.data[first] == '0' &&
        is_digit(file_->content.data[next])) {
      return {Token::Type::kError, source,
              "integer literal (" +
                  file_->content.data.substr(start, end - 1 - start) +
                  "...) has leading 0s"};
    }
  }

  while (end < len_ && is_digit(file_->content.data[end])) {
    auto digits = end - first;
    if (digits > kMaxDigits) {
      return {Token::Type::kError, source,
              "integer literal (" +
                  file_->content.data.substr(start, end - 1 - start) +
                  "...) has too many digits"};
    }

    end++;
  }

  pos_ = end;
  location_.column += (end - start);

  return build_token_from_int_if_possible(source, start, end, 10);
}

Token Lexer::try_ident() {
  // Must begin with an a-zA-Z_
  if (!(is_alpha(file_->content.data[pos_]) ||
        file_->content.data[pos_] == '_')) {
    return {};
  }

  auto source = begin_source();

  auto s = pos_;
  while (!is_eof() && is_alphanum_underscore(file_->content.data[pos_])) {
    pos_++;
    location_.column++;
  }

  if (file_->content.data[s] == '_') {
    // Check for an underscore on its own (special token), or a
    // double-underscore (not allowed).
    if ((pos_ == s + 1) || (file_->content.data[s + 1] == '_')) {
      location_.column -= (pos_ - s);
      pos_ = s;
      return {};
    }
  }

  auto str = file_->content.data_view.substr(s, pos_ - s);
  end_source(source);

  auto t = check_keyword(source, str);
  if (!t.IsUninitialized()) {
    return t;
  }

  return {Token::Type::kIdentifier, source, str};
}

Token Lexer::try_punctuation() {
  auto source = begin_source();
  auto type = Token::Type::kUninitialized;

  if (matches(pos_, "@")) {
    type = Token::Type::kAttr;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "[[")) {
    type = Token::Type::kAttrLeft;
    pos_ += 2;
    location_.column += 2;
  } else if (matches(pos_, "]]")) {
    type = Token::Type::kAttrRight;
    pos_ += 2;
    location_.column += 2;
  } else if (matches(pos_, "(")) {
    type = Token::Type::kParenLeft;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, ")")) {
    type = Token::Type::kParenRight;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "[")) {
    type = Token::Type::kBracketLeft;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "]")) {
    type = Token::Type::kBracketRight;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "{")) {
    type = Token::Type::kBraceLeft;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "}")) {
    type = Token::Type::kBraceRight;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "&&")) {
    type = Token::Type::kAndAnd;
    pos_ += 2;
    location_.column += 2;
  } else if (matches(pos_, "&")) {
    type = Token::Type::kAnd;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "/")) {
    type = Token::Type::kForwardSlash;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "!=")) {
    type = Token::Type::kNotEqual;
    pos_ += 2;
    location_.column += 2;
  } else if (matches(pos_, "!")) {
    type = Token::Type::kBang;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, ":")) {
    type = Token::Type::kColon;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, ",")) {
    type = Token::Type::kComma;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "==")) {
    type = Token::Type::kEqualEqual;
    pos_ += 2;
    location_.column += 2;
  } else if (matches(pos_, "=")) {
    type = Token::Type::kEqual;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, ">=")) {
    type = Token::Type::kGreaterThanEqual;
    pos_ += 2;
    location_.column += 2;
  } else if (matches(pos_, ">>")) {
    type = Token::Type::kShiftRight;
    pos_ += 2;
    location_.column += 2;
  } else if (matches(pos_, ">")) {
    type = Token::Type::kGreaterThan;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "<=")) {
    type = Token::Type::kLessThanEqual;
    pos_ += 2;
    location_.column += 2;
  } else if (matches(pos_, "<<")) {
    type = Token::Type::kShiftLeft;
    pos_ += 2;
    location_.column += 2;
  } else if (matches(pos_, "<")) {
    type = Token::Type::kLessThan;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "%")) {
    type = Token::Type::kMod;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "->")) {
    type = Token::Type::kArrow;
    pos_ += 2;
    location_.column += 2;
  } else if (matches(pos_, "--")) {
    type = Token::Type::kMinusMinus;
    pos_ += 2;
    location_.column += 2;
  } else if (matches(pos_, "-")) {
    type = Token::Type::kMinus;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, ".")) {
    type = Token::Type::kPeriod;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "++")) {
    type = Token::Type::kPlusPlus;
    pos_ += 2;
    location_.column += 2;
  } else if (matches(pos_, "+")) {
    type = Token::Type::kPlus;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "||")) {
    type = Token::Type::kOrOr;
    pos_ += 2;
    location_.column += 2;
  } else if (matches(pos_, "|")) {
    type = Token::Type::kOr;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, ";")) {
    type = Token::Type::kSemicolon;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "*")) {
    type = Token::Type::kStar;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "~")) {
    type = Token::Type::kTilde;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "_")) {
    type = Token::Type::kUnderscore;
    pos_ += 1;
    location_.column += 1;
  } else if (matches(pos_, "^")) {
    type = Token::Type::kXor;
    pos_ += 1;
    location_.column += 1;
  }

  end_source(source);

  return {type, source};
}

Token Lexer::check_keyword(const Source& source, std::string_view str) {
  if (str == "array")
    return {Token::Type::kArray, source, "array"};
  if (str == "atomic")
    return {Token::Type::kAtomic, source, "atomic"};
  if (str == "bitcast")
    return {Token::Type::kBitcast, source, "bitcast"};
  if (str == "bool")
    return {Token::Type::kBool, source, "bool"};
  if (str == "break")
    return {Token::Type::kBreak, source, "break"};
  if (str == "case")
    return {Token::Type::kCase, source, "case"};
  if (str == "continue")
    return {Token::Type::kContinue, source, "continue"};
  if (str == "continuing")
    return {Token::Type::kContinuing, source, "continuing"};
  if (str == "discard")
    return {Token::Type::kDiscard, source, "discard"};
  if (str == "default")
    return {Token::Type::kDefault, source, "default"};
  if (str == "else")
    return {Token::Type::kElse, source, "else"};
  if (str == "elseif")
    return {Token::Type::kElseIf, source, "elseif"};
  if (str == "f32")
    return {Token::Type::kF32, source, "f32"};
  if (str == "fallthrough")
    return {Token::Type::kFallthrough, source, "fallthrough"};
  if (str == "false")
    return {Token::Type::kFalse, source, "false"};
  if (str == "fn")
    return {Token::Type::kFn, source, "fn"};
  if (str == "for")
    return {Token::Type::kFor, source, "for"};
  if (str == "function")
    return {Token::Type::kFunction, source, "function"};
  if (str == "i32")
    return {Token::Type::kI32, source, "i32"};
  if (str == "if")
    return {Token::Type::kIf, source, "if"};
  if (str == "import")
    return {Token::Type::kImport, source, "import"};
  if (str == "let")
    return {Token::Type::kLet, source, "let"};
  if (str == "loop")
    return {Token::Type::kLoop, source, "loop"};
  if (str == "mat2x2")
    return {Token::Type::kMat2x2, source, "mat2x2"};
  if (str == "mat2x3")
    return {Token::Type::kMat2x3, source, "mat2x3"};
  if (str == "mat2x4")
    return {Token::Type::kMat2x4, source, "mat2x4"};
  if (str == "mat3x2")
    return {Token::Type::kMat3x2, source, "mat3x2"};
  if (str == "mat3x3")
    return {Token::Type::kMat3x3, source, "mat3x3"};
  if (str == "mat3x4")
    return {Token::Type::kMat3x4, source, "mat3x4"};
  if (str == "mat4x2")
    return {Token::Type::kMat4x2, source, "mat4x2"};
  if (str == "mat4x3")
    return {Token::Type::kMat4x3, source, "mat4x3"};
  if (str == "mat4x4")
    return {Token::Type::kMat4x4, source, "mat4x4"};
  if (str == "private")
    return {Token::Type::kPrivate, source, "private"};
  if (str == "ptr")
    return {Token::Type::kPtr, source, "ptr"};
  if (str == "return")
    return {Token::Type::kReturn, source, "return"};
  if (str == "sampler")
    return {Token::Type::kSampler, source, "sampler"};
  if (str == "sampler_comparison")
    return {Token::Type::kComparisonSampler, source, "sampler_comparison"};
  if (str == "storage_buffer" || str == "storage")
    return {Token::Type::kStorage, source, "storage"};
  if (str == "struct")
    return {Token::Type::kStruct, source, "struct"};
  if (str == "switch")
    return {Token::Type::kSwitch, source, "switch"};
  if (str == "texture_1d")
    return {Token::Type::kTextureSampled1d, source, "texture_1d"};
  if (str == "texture_2d")
    return {Token::Type::kTextureSampled2d, source, "texture_2d"};
  if (str == "texture_2d_array")
    return {Token::Type::kTextureSampled2dArray, source, "texture_2d_array"};
  if (str == "texture_3d")
    return {Token::Type::kTextureSampled3d, source, "texture_3d"};
  if (str == "texture_cube")
    return {Token::Type::kTextureSampledCube, source, "texture_cube"};
  if (str == "texture_cube_array") {
    return {Token::Type::kTextureSampledCubeArray, source,
            "texture_cube_array"};
  }
  if (str == "texture_depth_2d")
    return {Token::Type::kTextureDepth2d, source, "texture_depth_2d"};
  if (str == "texture_depth_2d_array") {
    return {Token::Type::kTextureDepth2dArray, source,
            "texture_depth_2d_array"};
  }
  if (str == "texture_depth_cube")
    return {Token::Type::kTextureDepthCube, source, "texture_depth_cube"};
  if (str == "texture_depth_cube_array") {
    return {Token::Type::kTextureDepthCubeArray, source,
            "texture_depth_cube_array"};
  }
  if (str == "texture_depth_multisampled_2d") {
    return {Token::Type::kTextureDepthMultisampled2d, source,
            "texture_depth_multisampled_2d"};
  }
  if (str == "texture_external") {
    return {Token::Type::kTextureExternal, source, "texture_external"};
  }
  if (str == "texture_multisampled_2d") {
    return {Token::Type::kTextureMultisampled2d, source,
            "texture_multisampled_2d"};
  }
  if (str == "texture_storage_1d") {
    return {Token::Type::kTextureStorage1d, source, "texture_storage_1d"};
  }
  if (str == "texture_storage_2d") {
    return {Token::Type::kTextureStorage2d, source, "texture_storage_2d"};
  }
  if (str == "texture_storage_2d_array") {
    return {Token::Type::kTextureStorage2dArray, source,
            "texture_storage_2d_array"};
  }
  if (str == "texture_storage_3d") {
    return {Token::Type::kTextureStorage3d, source, "texture_storage_3d"};
  }
  if (str == "true")
    return {Token::Type::kTrue, source, "true"};
  if (str == "type")
    return {Token::Type::kType, source, "type"};
  if (str == "u32")
    return {Token::Type::kU32, source, "u32"};
  if (str == "uniform")
    return {Token::Type::kUniform, source, "uniform"};
  if (str == "var")
    return {Token::Type::kVar, source, "var"};
  if (str == "vec2")
    return {Token::Type::kVec2, source, "vec2"};
  if (str == "vec3")
    return {Token::Type::kVec3, source, "vec3"};
  if (str == "vec4")
    return {Token::Type::kVec4, source, "vec4"};
  if (str == "workgroup")
    return {Token::Type::kWorkgroup, source, "workgroup"};
  return {};
}

}  // namespace wgsl
}  // namespace reader
}  // namespace tint