| // Copyright 2022 The Tint Authors. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "src/tint/transform/builtin_polyfill.h" |
| |
| #include <utility> |
| |
| #include "src/tint/transform/test_helper.h" |
| |
| namespace tint::transform { |
| namespace { |
| |
| using Level = BuiltinPolyfill::Level; |
| |
| using BuiltinPolyfillTest = TransformTest; |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunEmptyModule) { |
| auto* src = R"()"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, EmptyModule) { |
| auto* src = R"()"; |
| |
| auto* expect = src; |
| |
| auto got = Run<BuiltinPolyfill>(src); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // acosh |
| //////////////////////////////////////////////////////////////////////////////// |
| DataMap polyfillAcosh(Level level) { |
| BuiltinPolyfill::Builtins builtins; |
| builtins.acosh = level; |
| DataMap data; |
| data.Add<BuiltinPolyfill::Config>(builtins); |
| return data; |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunAcosh) { |
| auto* src = R"( |
| fn f() { |
| let v = 1.0; |
| acosh(v); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src, polyfillAcosh(Level::kNone))); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillAcosh(Level::kRangeCheck))); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillAcosh(Level::kFull))); |
| } |
| |
| // TODO(crbug.com/tint/1581): Enable once `acosh` is implemented as @const |
| TEST_F(BuiltinPolyfillTest, DISABLED_Acosh_ConstantExpression) { |
| auto* src = R"( |
| fn f() { |
| let r : f32 = acosh(1.0); |
| } |
| )"; |
| |
| auto* expect = src; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillAcosh(Level::kFull)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, Acosh_Full_f32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1.0; |
| let r : f32 = acosh(v); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_acosh(x : f32) -> f32 { |
| return log((x + sqrt(((x * x) - 1)))); |
| } |
| |
| fn f() { |
| let v = 1.0; |
| let r : f32 = tint_acosh(v); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillAcosh(Level::kFull)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, Acosh_Full_vec3_f32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1.0; |
| let r : vec3<f32> = acosh(vec3<f32>(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_acosh(x : vec3<f32>) -> vec3<f32> { |
| return log((x + sqrt(((x * x) - 1)))); |
| } |
| |
| fn f() { |
| let v = 1.0; |
| let r : vec3<f32> = tint_acosh(vec3<f32>(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillAcosh(Level::kFull)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, Acosh_Range_f32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1.0; |
| let r : f32 = acosh(v); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_acosh(x : f32) -> f32 { |
| return select(acosh(x), 0.0, (x < 1.0)); |
| } |
| |
| fn f() { |
| let v = 1.0; |
| let r : f32 = tint_acosh(v); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillAcosh(Level::kRangeCheck)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, Acosh_Range_vec3_f32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1.0; |
| let r : vec3<f32> = acosh(vec3<f32>(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_acosh(x : vec3<f32>) -> vec3<f32> { |
| return select(acosh(x), vec3<f32>(0.0), (x < vec3<f32>(1.0))); |
| } |
| |
| fn f() { |
| let v = 1.0; |
| let r : vec3<f32> = tint_acosh(vec3<f32>(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillAcosh(Level::kRangeCheck)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // asinh |
| //////////////////////////////////////////////////////////////////////////////// |
| DataMap polyfillSinh() { |
| BuiltinPolyfill::Builtins builtins; |
| builtins.asinh = true; |
| DataMap data; |
| data.Add<BuiltinPolyfill::Config>(builtins); |
| return data; |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunAsinh) { |
| auto* src = R"( |
| fn f() { |
| let v = 1.0; |
| asinh(v); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillSinh())); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, Asinh_ConstantExpression) { |
| auto* src = R"( |
| fn f() { |
| let r : f32 = asinh(1.0); |
| } |
| )"; |
| |
| auto* expect = src; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillSinh()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, Asinh_f32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1.0; |
| let r : f32 = asinh(v); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_sinh(x : f32) -> f32 { |
| return log((x + sqrt(((x * x) + 1)))); |
| } |
| |
| fn f() { |
| let v = 1.0; |
| let r : f32 = tint_sinh(v); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillSinh()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, Asinh_vec3_f32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1.0; |
| let r : vec3<f32> = asinh(vec3<f32>(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_sinh(x : vec3<f32>) -> vec3<f32> { |
| return log((x + sqrt(((x * x) + 1)))); |
| } |
| |
| fn f() { |
| let v = 1.0; |
| let r : vec3<f32> = tint_sinh(vec3<f32>(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillSinh()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // atanh |
| //////////////////////////////////////////////////////////////////////////////// |
| DataMap polyfillAtanh(Level level) { |
| BuiltinPolyfill::Builtins builtins; |
| builtins.atanh = level; |
| DataMap data; |
| data.Add<BuiltinPolyfill::Config>(builtins); |
| return data; |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunAtanh) { |
| auto* src = R"( |
| fn f() { |
| let v = 1.0; |
| atanh(v); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src, polyfillAtanh(Level::kNone))); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillAtanh(Level::kRangeCheck))); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillAtanh(Level::kFull))); |
| } |
| |
| // TODO(crbug.com/tint/1581): Enable once `atanh` is implemented as @const |
| TEST_F(BuiltinPolyfillTest, DISABLED_Atanh_ConstantExpression) { |
| auto* src = R"( |
| fn f() { |
| let r : f32 = atanh(1.23); |
| } |
| )"; |
| |
| auto* expect = src; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillAtanh(Level::kFull)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, Atanh_Full_f32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1.0; |
| let r : f32 = atanh(v); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_atanh(x : f32) -> f32 { |
| return (log(((1 + x) / (1 - x))) * 0.5); |
| } |
| |
| fn f() { |
| let v = 1.0; |
| let r : f32 = tint_atanh(v); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillAtanh(Level::kFull)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, Atanh_Full_vec3_f32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1.0; |
| let r : vec3<f32> = atanh(vec3<f32>(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_atanh(x : vec3<f32>) -> vec3<f32> { |
| return (log(((1 + x) / (1 - x))) * 0.5); |
| } |
| |
| fn f() { |
| let v = 1.0; |
| let r : vec3<f32> = tint_atanh(vec3<f32>(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillAtanh(Level::kFull)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, Atanh_Range_f32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1.0; |
| let r : f32 = atanh(v); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_atanh(x : f32) -> f32 { |
| return select(atanh(x), 0.0, (x >= 1.0)); |
| } |
| |
| fn f() { |
| let v = 1.0; |
| let r : f32 = tint_atanh(v); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillAtanh(Level::kRangeCheck)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, Atanh_Range_vec3_f32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1.0; |
| let r : vec3<f32> = atanh(vec3<f32>(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_atanh(x : vec3<f32>) -> vec3<f32> { |
| return select(atanh(x), vec3<f32>(0.0), (x >= vec3<f32>(1.0))); |
| } |
| |
| fn f() { |
| let v = 1.0; |
| let r : vec3<f32> = tint_atanh(vec3<f32>(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillAtanh(Level::kRangeCheck)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // bitshiftModulo |
| //////////////////////////////////////////////////////////////////////////////// |
| DataMap polyfillBitshiftModulo() { |
| BuiltinPolyfill::Builtins builtins; |
| builtins.bitshift_modulo = true; |
| DataMap data; |
| data.Add<BuiltinPolyfill::Config>(builtins); |
| return data; |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunBitshiftModulo_shl_scalar) { |
| auto* src = R"( |
| fn f() { |
| let v = 15u; |
| let r = 1i << v; |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillBitshiftModulo())); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunBitshiftModulo_shl_vector) { |
| auto* src = R"( |
| fn f() { |
| let v = 15u; |
| let r = vec3(1i) << vec3(v); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillBitshiftModulo())); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunBitshiftModulo_shr_scalar) { |
| auto* src = R"( |
| fn f() { |
| let v = 15u; |
| let r = 1i >> v; |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillBitshiftModulo())); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunBitshiftModulo_shr_vector) { |
| auto* src = R"( |
| fn f() { |
| let v = 15u; |
| let r = vec3(1i) >> vec3(v); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillBitshiftModulo())); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, BitshiftModulo_shl_scalar) { |
| auto* src = R"( |
| fn f() { |
| let v = 15u; |
| let r = 1i << v; |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn f() { |
| let v = 15u; |
| let r = (1i << (v & 31)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillBitshiftModulo()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, BitshiftModulo_shl_vector) { |
| auto* src = R"( |
| fn f() { |
| let v = 15u; |
| let r = vec3(1i) << vec3(v); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn f() { |
| let v = 15u; |
| let r = (vec3(1i) << (vec3(v) & vec3<u32>(31))); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillBitshiftModulo()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, BitshiftModulo_shr_scalar) { |
| auto* src = R"( |
| fn f() { |
| let v = 15u; |
| let r = 1i >> v; |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn f() { |
| let v = 15u; |
| let r = (1i >> (v & 31)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillBitshiftModulo()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, BitshiftModulo_shr_vector) { |
| auto* src = R"( |
| fn f() { |
| let v = 15u; |
| let r = vec3(1i) >> vec3(v); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn f() { |
| let v = 15u; |
| let r = (vec3(1i) >> (vec3(v) & vec3<u32>(31))); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillBitshiftModulo()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // clampInteger |
| //////////////////////////////////////////////////////////////////////////////// |
| DataMap polyfillClampInteger() { |
| BuiltinPolyfill::Builtins builtins; |
| builtins.clamp_int = true; |
| DataMap data; |
| data.Add<BuiltinPolyfill::Config>(builtins); |
| return data; |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunClampInteger_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1i; |
| clamp(v, 2i, 3i); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillClampInteger())); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunClampInteger_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1u; |
| clamp(v, 2u, 3u); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillClampInteger())); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunClampInteger_f32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1f; |
| clamp(v, 2f, 3f); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src, polyfillClampInteger())); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunClampInteger_f16) { |
| auto* src = R"( |
| enable f16; |
| |
| fn f() { |
| let v = 1h; |
| clamp(v, 2h, 3h); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src, polyfillClampInteger())); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ClampInteger_ConstantExpression) { |
| auto* src = R"( |
| fn f() { |
| let r : i32 = clamp(1i, 2i, 3i); |
| } |
| )"; |
| |
| auto* expect = src; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillClampInteger()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ClampInteger_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1i; |
| let r : i32 = clamp(v, 2i, 3i); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_clamp(e : i32, low : i32, high : i32) -> i32 { |
| return min(max(e, low), high); |
| } |
| |
| fn f() { |
| let v = 1i; |
| let r : i32 = tint_clamp(v, 2i, 3i); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillClampInteger()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ClampInteger_vec3_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1i; |
| let r : vec3<i32> = clamp(vec3(v), vec3(2i), vec3(3i)); |
| } |
| )"; |
| |
| auto* expect = |
| R"( |
| fn tint_clamp(e : vec3<i32>, low : vec3<i32>, high : vec3<i32>) -> vec3<i32> { |
| return min(max(e, low), high); |
| } |
| |
| fn f() { |
| let v = 1i; |
| let r : vec3<i32> = tint_clamp(vec3(v), vec3(2i), vec3(3i)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillClampInteger()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ClampInteger_u32) { |
| auto* src = R"( |
| fn f() { |
| let r : u32 = clamp(1u, 2u, 3u); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn f() { |
| let r : u32 = clamp(1u, 2u, 3u); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillClampInteger()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ClampInteger_vec3_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1u; |
| let r : vec3<u32> = clamp(vec3(v), vec3(2u), vec3(3u)); |
| } |
| )"; |
| |
| auto* expect = |
| R"( |
| fn tint_clamp(e : vec3<u32>, low : vec3<u32>, high : vec3<u32>) -> vec3<u32> { |
| return min(max(e, low), high); |
| } |
| |
| fn f() { |
| let v = 1u; |
| let r : vec3<u32> = tint_clamp(vec3(v), vec3(2u), vec3(3u)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillClampInteger()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // countLeadingZeros |
| //////////////////////////////////////////////////////////////////////////////// |
| DataMap polyfillCountLeadingZeros() { |
| BuiltinPolyfill::Builtins builtins; |
| builtins.count_leading_zeros = true; |
| DataMap data; |
| data.Add<BuiltinPolyfill::Config>(builtins); |
| return data; |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunCountLeadingZeros) { |
| auto* src = R"( |
| fn f() { |
| let v = 15; |
| countLeadingZeros(v); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillCountLeadingZeros())); |
| } |
| |
| // TODO(crbug.com/tint/1581): Enable once `countLeadingZeros` is implemented as @const |
| TEST_F(BuiltinPolyfillTest, DISABLED_CountLeadingZeros_ConstantExpression) { |
| auto* src = R"( |
| fn f() { |
| let r : i32 = countLeadingZeros(15i); |
| } |
| )"; |
| |
| auto* expect = src; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillCountLeadingZeros()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, CountLeadingZeros_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 15i; |
| let r : i32 = countLeadingZeros(v); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_count_leading_zeros(v : i32) -> i32 { |
| var x = u32(v); |
| let b16 = select(0u, 16u, (x <= 65535u)); |
| x = (x << b16); |
| let b8 = select(0u, 8u, (x <= 16777215u)); |
| x = (x << b8); |
| let b4 = select(0u, 4u, (x <= 268435455u)); |
| x = (x << b4); |
| let b2 = select(0u, 2u, (x <= 1073741823u)); |
| x = (x << b2); |
| let b1 = select(0u, 1u, (x <= 2147483647u)); |
| let is_zero = select(0u, 1u, (x == 0u)); |
| return i32((((((b16 | b8) | b4) | b2) | b1) + is_zero)); |
| } |
| |
| fn f() { |
| let v = 15i; |
| let r : i32 = tint_count_leading_zeros(v); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillCountLeadingZeros()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, CountLeadingZeros_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 15u; |
| let r : u32 = countLeadingZeros(v); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_count_leading_zeros(v : u32) -> u32 { |
| var x = u32(v); |
| let b16 = select(0u, 16u, (x <= 65535u)); |
| x = (x << b16); |
| let b8 = select(0u, 8u, (x <= 16777215u)); |
| x = (x << b8); |
| let b4 = select(0u, 4u, (x <= 268435455u)); |
| x = (x << b4); |
| let b2 = select(0u, 2u, (x <= 1073741823u)); |
| x = (x << b2); |
| let b1 = select(0u, 1u, (x <= 2147483647u)); |
| let is_zero = select(0u, 1u, (x == 0u)); |
| return u32((((((b16 | b8) | b4) | b2) | b1) + is_zero)); |
| } |
| |
| fn f() { |
| let v = 15u; |
| let r : u32 = tint_count_leading_zeros(v); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillCountLeadingZeros()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, CountLeadingZeros_vec3_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 15i; |
| let r : vec3<i32> = countLeadingZeros(vec3<i32>(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_count_leading_zeros(v : vec3<i32>) -> vec3<i32> { |
| var x = vec3<u32>(v); |
| let b16 = select(vec3<u32>(0u), vec3<u32>(16u), (x <= vec3<u32>(65535u))); |
| x = (x << b16); |
| let b8 = select(vec3<u32>(0u), vec3<u32>(8u), (x <= vec3<u32>(16777215u))); |
| x = (x << b8); |
| let b4 = select(vec3<u32>(0u), vec3<u32>(4u), (x <= vec3<u32>(268435455u))); |
| x = (x << b4); |
| let b2 = select(vec3<u32>(0u), vec3<u32>(2u), (x <= vec3<u32>(1073741823u))); |
| x = (x << b2); |
| let b1 = select(vec3<u32>(0u), vec3<u32>(1u), (x <= vec3<u32>(2147483647u))); |
| let is_zero = select(vec3<u32>(0u), vec3<u32>(1u), (x == vec3<u32>(0u))); |
| return vec3<i32>((((((b16 | b8) | b4) | b2) | b1) + is_zero)); |
| } |
| |
| fn f() { |
| let v = 15i; |
| let r : vec3<i32> = tint_count_leading_zeros(vec3<i32>(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillCountLeadingZeros()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, CountLeadingZeros_vec3_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 15u; |
| let r : vec3<u32> = countLeadingZeros(vec3<u32>(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_count_leading_zeros(v : vec3<u32>) -> vec3<u32> { |
| var x = vec3<u32>(v); |
| let b16 = select(vec3<u32>(0u), vec3<u32>(16u), (x <= vec3<u32>(65535u))); |
| x = (x << b16); |
| let b8 = select(vec3<u32>(0u), vec3<u32>(8u), (x <= vec3<u32>(16777215u))); |
| x = (x << b8); |
| let b4 = select(vec3<u32>(0u), vec3<u32>(4u), (x <= vec3<u32>(268435455u))); |
| x = (x << b4); |
| let b2 = select(vec3<u32>(0u), vec3<u32>(2u), (x <= vec3<u32>(1073741823u))); |
| x = (x << b2); |
| let b1 = select(vec3<u32>(0u), vec3<u32>(1u), (x <= vec3<u32>(2147483647u))); |
| let is_zero = select(vec3<u32>(0u), vec3<u32>(1u), (x == vec3<u32>(0u))); |
| return vec3<u32>((((((b16 | b8) | b4) | b2) | b1) + is_zero)); |
| } |
| |
| fn f() { |
| let v = 15u; |
| let r : vec3<u32> = tint_count_leading_zeros(vec3<u32>(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillCountLeadingZeros()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // countTrailingZeros |
| //////////////////////////////////////////////////////////////////////////////// |
| DataMap polyfillCountTrailingZeros() { |
| BuiltinPolyfill::Builtins builtins; |
| builtins.count_trailing_zeros = true; |
| DataMap data; |
| data.Add<BuiltinPolyfill::Config>(builtins); |
| return data; |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunCountTrailingZeros) { |
| auto* src = R"( |
| fn f() { |
| let v = 15; |
| countTrailingZeros(v); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillCountTrailingZeros())); |
| } |
| |
| // TODO(crbug.com/tint/1581): Enable once `countTrailingZeros` is implemented as @const |
| TEST_F(BuiltinPolyfillTest, DISABLED_CountTrailingZeros_ConstantExpression) { |
| auto* src = R"( |
| fn f() { |
| let r : i32 = countTrailingZeros(15i); |
| } |
| )"; |
| |
| auto* expect = src; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillCountTrailingZeros()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, CountTrailingZeros_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 15i; |
| let r : i32 = countTrailingZeros(v); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_count_trailing_zeros(v : i32) -> i32 { |
| var x = u32(v); |
| let b16 = select(16u, 0u, bool((x & 65535u))); |
| x = (x >> b16); |
| let b8 = select(8u, 0u, bool((x & 255u))); |
| x = (x >> b8); |
| let b4 = select(4u, 0u, bool((x & 15u))); |
| x = (x >> b4); |
| let b2 = select(2u, 0u, bool((x & 3u))); |
| x = (x >> b2); |
| let b1 = select(1u, 0u, bool((x & 1u))); |
| let is_zero = select(0u, 1u, (x == 0u)); |
| return i32((((((b16 | b8) | b4) | b2) | b1) + is_zero)); |
| } |
| |
| fn f() { |
| let v = 15i; |
| let r : i32 = tint_count_trailing_zeros(v); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillCountTrailingZeros()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, CountTrailingZeros_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 15u; |
| let r : u32 = countTrailingZeros(v); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_count_trailing_zeros(v : u32) -> u32 { |
| var x = u32(v); |
| let b16 = select(16u, 0u, bool((x & 65535u))); |
| x = (x >> b16); |
| let b8 = select(8u, 0u, bool((x & 255u))); |
| x = (x >> b8); |
| let b4 = select(4u, 0u, bool((x & 15u))); |
| x = (x >> b4); |
| let b2 = select(2u, 0u, bool((x & 3u))); |
| x = (x >> b2); |
| let b1 = select(1u, 0u, bool((x & 1u))); |
| let is_zero = select(0u, 1u, (x == 0u)); |
| return u32((((((b16 | b8) | b4) | b2) | b1) + is_zero)); |
| } |
| |
| fn f() { |
| let v = 15u; |
| let r : u32 = tint_count_trailing_zeros(v); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillCountTrailingZeros()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, CountTrailingZeros_vec3_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 15i; |
| let r : vec3<i32> = countTrailingZeros(vec3<i32>(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_count_trailing_zeros(v : vec3<i32>) -> vec3<i32> { |
| var x = vec3<u32>(v); |
| let b16 = select(vec3<u32>(16u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(65535u)))); |
| x = (x >> b16); |
| let b8 = select(vec3<u32>(8u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(255u)))); |
| x = (x >> b8); |
| let b4 = select(vec3<u32>(4u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(15u)))); |
| x = (x >> b4); |
| let b2 = select(vec3<u32>(2u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(3u)))); |
| x = (x >> b2); |
| let b1 = select(vec3<u32>(1u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(1u)))); |
| let is_zero = select(vec3<u32>(0u), vec3<u32>(1u), (x == vec3<u32>(0u))); |
| return vec3<i32>((((((b16 | b8) | b4) | b2) | b1) + is_zero)); |
| } |
| |
| fn f() { |
| let v = 15i; |
| let r : vec3<i32> = tint_count_trailing_zeros(vec3<i32>(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillCountTrailingZeros()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, CountTrailingZeros_vec3_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 15u; |
| let r : vec3<u32> = countTrailingZeros(vec3<u32>(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_count_trailing_zeros(v : vec3<u32>) -> vec3<u32> { |
| var x = vec3<u32>(v); |
| let b16 = select(vec3<u32>(16u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(65535u)))); |
| x = (x >> b16); |
| let b8 = select(vec3<u32>(8u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(255u)))); |
| x = (x >> b8); |
| let b4 = select(vec3<u32>(4u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(15u)))); |
| x = (x >> b4); |
| let b2 = select(vec3<u32>(2u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(3u)))); |
| x = (x >> b2); |
| let b1 = select(vec3<u32>(1u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(1u)))); |
| let is_zero = select(vec3<u32>(0u), vec3<u32>(1u), (x == vec3<u32>(0u))); |
| return vec3<u32>((((((b16 | b8) | b4) | b2) | b1) + is_zero)); |
| } |
| |
| fn f() { |
| let v = 15u; |
| let r : vec3<u32> = tint_count_trailing_zeros(vec3<u32>(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillCountTrailingZeros()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // extractBits |
| //////////////////////////////////////////////////////////////////////////////// |
| DataMap polyfillExtractBits(Level level) { |
| BuiltinPolyfill::Builtins builtins; |
| builtins.extract_bits = level; |
| DataMap data; |
| data.Add<BuiltinPolyfill::Config>(builtins); |
| return data; |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunExtractBits) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234i; |
| extractBits(v, 5u, 6u); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src, polyfillExtractBits(Level::kNone))); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillExtractBits(Level::kClampParameters))); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillExtractBits(Level::kFull))); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ExtractBits_ConstantExpression) { |
| auto* src = R"( |
| fn f() { |
| let r : i32 = countTrailingZeros(15i); |
| } |
| )"; |
| |
| auto* expect = src; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillExtractBits(Level::kFull)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ExtractBits_Full_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234i; |
| let r : i32 = extractBits(v, 5u, 6u); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_extract_bits(v : i32, offset : u32, count : u32) -> i32 { |
| let s = min(offset, 32u); |
| let e = min(32u, (s + count)); |
| let shl = (32u - e); |
| let shr = (shl + s); |
| return ((v << shl) >> shr); |
| } |
| |
| fn f() { |
| let v = 1234i; |
| let r : i32 = tint_extract_bits(v, 5u, 6u); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillExtractBits(Level::kFull)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ExtractBits_Full_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234u; |
| let r : u32 = extractBits(v, 5u, 6u); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_extract_bits(v : u32, offset : u32, count : u32) -> u32 { |
| let s = min(offset, 32u); |
| let e = min(32u, (s + count)); |
| let shl = (32u - e); |
| let shr = (shl + s); |
| return ((v << shl) >> shr); |
| } |
| |
| fn f() { |
| let v = 1234u; |
| let r : u32 = tint_extract_bits(v, 5u, 6u); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillExtractBits(Level::kFull)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ExtractBits_Full_vec3_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234i; |
| let r : vec3<i32> = extractBits(vec3<i32>(v), 5u, 6u); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_extract_bits(v : vec3<i32>, offset : u32, count : u32) -> vec3<i32> { |
| let s = min(offset, 32u); |
| let e = min(32u, (s + count)); |
| let shl = (32u - e); |
| let shr = (shl + s); |
| return ((v << vec3<u32>(shl)) >> vec3<u32>(shr)); |
| } |
| |
| fn f() { |
| let v = 1234i; |
| let r : vec3<i32> = tint_extract_bits(vec3<i32>(v), 5u, 6u); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillExtractBits(Level::kFull)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ExtractBits_Full_vec3_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234u; |
| let r : vec3<u32> = extractBits(vec3<u32>(v), 5u, 6u); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_extract_bits(v : vec3<u32>, offset : u32, count : u32) -> vec3<u32> { |
| let s = min(offset, 32u); |
| let e = min(32u, (s + count)); |
| let shl = (32u - e); |
| let shr = (shl + s); |
| return ((v << vec3<u32>(shl)) >> vec3<u32>(shr)); |
| } |
| |
| fn f() { |
| let v = 1234u; |
| let r : vec3<u32> = tint_extract_bits(vec3<u32>(v), 5u, 6u); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillExtractBits(Level::kFull)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ExtractBits_Clamp_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234i; |
| let r : i32 = extractBits(v, 5u, 6u); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_extract_bits(v : i32, offset : u32, count : u32) -> i32 { |
| let s = min(offset, 32u); |
| let e = min(32u, (s + count)); |
| return extractBits(v, s, (e - s)); |
| } |
| |
| fn f() { |
| let v = 1234i; |
| let r : i32 = tint_extract_bits(v, 5u, 6u); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillExtractBits(Level::kClampParameters)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ExtractBits_Clamp_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234u; |
| let r : u32 = extractBits(v, 5u, 6u); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_extract_bits(v : u32, offset : u32, count : u32) -> u32 { |
| let s = min(offset, 32u); |
| let e = min(32u, (s + count)); |
| return extractBits(v, s, (e - s)); |
| } |
| |
| fn f() { |
| let v = 1234u; |
| let r : u32 = tint_extract_bits(v, 5u, 6u); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillExtractBits(Level::kClampParameters)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ExtractBits_Clamp_vec3_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234i; |
| let r : vec3<i32> = extractBits(vec3<i32>(v), 5u, 6u); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_extract_bits(v : vec3<i32>, offset : u32, count : u32) -> vec3<i32> { |
| let s = min(offset, 32u); |
| let e = min(32u, (s + count)); |
| return extractBits(v, s, (e - s)); |
| } |
| |
| fn f() { |
| let v = 1234i; |
| let r : vec3<i32> = tint_extract_bits(vec3<i32>(v), 5u, 6u); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillExtractBits(Level::kClampParameters)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ExtractBits_Clamp_vec3_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234u; |
| let r : vec3<u32> = extractBits(vec3<u32>(v), 5u, 6u); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_extract_bits(v : vec3<u32>, offset : u32, count : u32) -> vec3<u32> { |
| let s = min(offset, 32u); |
| let e = min(32u, (s + count)); |
| return extractBits(v, s, (e - s)); |
| } |
| |
| fn f() { |
| let v = 1234u; |
| let r : vec3<u32> = tint_extract_bits(vec3<u32>(v), 5u, 6u); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillExtractBits(Level::kClampParameters)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // firstLeadingBit |
| //////////////////////////////////////////////////////////////////////////////// |
| DataMap polyfillFirstLeadingBit() { |
| BuiltinPolyfill::Builtins builtins; |
| builtins.first_leading_bit = true; |
| DataMap data; |
| data.Add<BuiltinPolyfill::Config>(builtins); |
| return data; |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunFirstLeadingBit) { |
| auto* src = R"( |
| fn f() { |
| let v = 15i; |
| firstLeadingBit(v); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillFirstLeadingBit())); |
| } |
| |
| // TODO(crbug.com/tint/1581): Enable once `firstLeadingBit` is implemented as @const |
| TEST_F(BuiltinPolyfillTest, DISABLED_FirstLeadingBit_ConstantExpression) { |
| auto* src = R"( |
| fn f() { |
| let r : i32 = firstLeadingBit(15i); |
| } |
| )"; |
| |
| auto* expect = src; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillFirstLeadingBit()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, FirstLeadingBit_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 15i; |
| let r : i32 = firstLeadingBit(v); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_first_leading_bit(v : i32) -> i32 { |
| var x = select(u32(v), u32(~(v)), (v < 0i)); |
| let b16 = select(0u, 16u, bool((x & 4294901760u))); |
| x = (x >> b16); |
| let b8 = select(0u, 8u, bool((x & 65280u))); |
| x = (x >> b8); |
| let b4 = select(0u, 4u, bool((x & 240u))); |
| x = (x >> b4); |
| let b2 = select(0u, 2u, bool((x & 12u))); |
| x = (x >> b2); |
| let b1 = select(0u, 1u, bool((x & 2u))); |
| let is_zero = select(0u, 4294967295u, (x == 0u)); |
| return i32((((((b16 | b8) | b4) | b2) | b1) | is_zero)); |
| } |
| |
| fn f() { |
| let v = 15i; |
| let r : i32 = tint_first_leading_bit(v); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillFirstLeadingBit()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, FirstLeadingBit_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 15u; |
| let r : u32 = firstLeadingBit(v); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_first_leading_bit(v : u32) -> u32 { |
| var x = v; |
| let b16 = select(0u, 16u, bool((x & 4294901760u))); |
| x = (x >> b16); |
| let b8 = select(0u, 8u, bool((x & 65280u))); |
| x = (x >> b8); |
| let b4 = select(0u, 4u, bool((x & 240u))); |
| x = (x >> b4); |
| let b2 = select(0u, 2u, bool((x & 12u))); |
| x = (x >> b2); |
| let b1 = select(0u, 1u, bool((x & 2u))); |
| let is_zero = select(0u, 4294967295u, (x == 0u)); |
| return u32((((((b16 | b8) | b4) | b2) | b1) | is_zero)); |
| } |
| |
| fn f() { |
| let v = 15u; |
| let r : u32 = tint_first_leading_bit(v); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillFirstLeadingBit()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, FirstLeadingBit_vec3_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 15i; |
| let r : vec3<i32> = firstLeadingBit(vec3<i32>(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_first_leading_bit(v : vec3<i32>) -> vec3<i32> { |
| var x = select(vec3<u32>(v), vec3<u32>(~(v)), (v < vec3<i32>(0i))); |
| let b16 = select(vec3<u32>(0u), vec3<u32>(16u), vec3<bool>((x & vec3<u32>(4294901760u)))); |
| x = (x >> b16); |
| let b8 = select(vec3<u32>(0u), vec3<u32>(8u), vec3<bool>((x & vec3<u32>(65280u)))); |
| x = (x >> b8); |
| let b4 = select(vec3<u32>(0u), vec3<u32>(4u), vec3<bool>((x & vec3<u32>(240u)))); |
| x = (x >> b4); |
| let b2 = select(vec3<u32>(0u), vec3<u32>(2u), vec3<bool>((x & vec3<u32>(12u)))); |
| x = (x >> b2); |
| let b1 = select(vec3<u32>(0u), vec3<u32>(1u), vec3<bool>((x & vec3<u32>(2u)))); |
| let is_zero = select(vec3<u32>(0u), vec3<u32>(4294967295u), (x == vec3<u32>(0u))); |
| return vec3<i32>((((((b16 | b8) | b4) | b2) | b1) | is_zero)); |
| } |
| |
| fn f() { |
| let v = 15i; |
| let r : vec3<i32> = tint_first_leading_bit(vec3<i32>(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillFirstLeadingBit()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, FirstLeadingBit_vec3_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 15u; |
| let r : vec3<u32> = firstLeadingBit(vec3<u32>(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_first_leading_bit(v : vec3<u32>) -> vec3<u32> { |
| var x = v; |
| let b16 = select(vec3<u32>(0u), vec3<u32>(16u), vec3<bool>((x & vec3<u32>(4294901760u)))); |
| x = (x >> b16); |
| let b8 = select(vec3<u32>(0u), vec3<u32>(8u), vec3<bool>((x & vec3<u32>(65280u)))); |
| x = (x >> b8); |
| let b4 = select(vec3<u32>(0u), vec3<u32>(4u), vec3<bool>((x & vec3<u32>(240u)))); |
| x = (x >> b4); |
| let b2 = select(vec3<u32>(0u), vec3<u32>(2u), vec3<bool>((x & vec3<u32>(12u)))); |
| x = (x >> b2); |
| let b1 = select(vec3<u32>(0u), vec3<u32>(1u), vec3<bool>((x & vec3<u32>(2u)))); |
| let is_zero = select(vec3<u32>(0u), vec3<u32>(4294967295u), (x == vec3<u32>(0u))); |
| return vec3<u32>((((((b16 | b8) | b4) | b2) | b1) | is_zero)); |
| } |
| |
| fn f() { |
| let v = 15u; |
| let r : vec3<u32> = tint_first_leading_bit(vec3<u32>(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillFirstLeadingBit()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // firstTrailingBit |
| //////////////////////////////////////////////////////////////////////////////// |
| DataMap polyfillFirstTrailingBit() { |
| BuiltinPolyfill::Builtins builtins; |
| builtins.first_trailing_bit = true; |
| DataMap data; |
| data.Add<BuiltinPolyfill::Config>(builtins); |
| return data; |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunFirstTrailingBit) { |
| auto* src = R"( |
| fn f() { |
| let v = 15i; |
| firstTrailingBit(v); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillFirstTrailingBit())); |
| } |
| |
| // TODO(crbug.com/tint/1581): Enable once `firstTrailingBit` is implemented as @const |
| TEST_F(BuiltinPolyfillTest, DISABLED_FirstTrailingBit_ConstantExpression) { |
| auto* src = R"( |
| fn f() { |
| let r : i32 = firstTrailingBit(15i); |
| } |
| )"; |
| |
| auto* expect = src; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillFirstTrailingBit()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, FirstTrailingBit_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 15i; |
| let r : i32 = firstTrailingBit(v); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_first_trailing_bit(v : i32) -> i32 { |
| var x = u32(v); |
| let b16 = select(16u, 0u, bool((x & 65535u))); |
| x = (x >> b16); |
| let b8 = select(8u, 0u, bool((x & 255u))); |
| x = (x >> b8); |
| let b4 = select(4u, 0u, bool((x & 15u))); |
| x = (x >> b4); |
| let b2 = select(2u, 0u, bool((x & 3u))); |
| x = (x >> b2); |
| let b1 = select(1u, 0u, bool((x & 1u))); |
| let is_zero = select(0u, 4294967295u, (x == 0u)); |
| return i32((((((b16 | b8) | b4) | b2) | b1) | is_zero)); |
| } |
| |
| fn f() { |
| let v = 15i; |
| let r : i32 = tint_first_trailing_bit(v); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillFirstTrailingBit()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, FirstTrailingBit_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 15u; |
| let r : u32 = firstTrailingBit(v); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_first_trailing_bit(v : u32) -> u32 { |
| var x = u32(v); |
| let b16 = select(16u, 0u, bool((x & 65535u))); |
| x = (x >> b16); |
| let b8 = select(8u, 0u, bool((x & 255u))); |
| x = (x >> b8); |
| let b4 = select(4u, 0u, bool((x & 15u))); |
| x = (x >> b4); |
| let b2 = select(2u, 0u, bool((x & 3u))); |
| x = (x >> b2); |
| let b1 = select(1u, 0u, bool((x & 1u))); |
| let is_zero = select(0u, 4294967295u, (x == 0u)); |
| return u32((((((b16 | b8) | b4) | b2) | b1) | is_zero)); |
| } |
| |
| fn f() { |
| let v = 15u; |
| let r : u32 = tint_first_trailing_bit(v); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillFirstTrailingBit()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, FirstTrailingBit_vec3_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 15i; |
| let r : vec3<i32> = firstTrailingBit(vec3<i32>(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_first_trailing_bit(v : vec3<i32>) -> vec3<i32> { |
| var x = vec3<u32>(v); |
| let b16 = select(vec3<u32>(16u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(65535u)))); |
| x = (x >> b16); |
| let b8 = select(vec3<u32>(8u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(255u)))); |
| x = (x >> b8); |
| let b4 = select(vec3<u32>(4u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(15u)))); |
| x = (x >> b4); |
| let b2 = select(vec3<u32>(2u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(3u)))); |
| x = (x >> b2); |
| let b1 = select(vec3<u32>(1u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(1u)))); |
| let is_zero = select(vec3<u32>(0u), vec3<u32>(4294967295u), (x == vec3<u32>(0u))); |
| return vec3<i32>((((((b16 | b8) | b4) | b2) | b1) | is_zero)); |
| } |
| |
| fn f() { |
| let v = 15i; |
| let r : vec3<i32> = tint_first_trailing_bit(vec3<i32>(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillFirstTrailingBit()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, FirstTrailingBit_vec3_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 15u; |
| let r : vec3<u32> = firstTrailingBit(vec3<u32>(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_first_trailing_bit(v : vec3<u32>) -> vec3<u32> { |
| var x = vec3<u32>(v); |
| let b16 = select(vec3<u32>(16u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(65535u)))); |
| x = (x >> b16); |
| let b8 = select(vec3<u32>(8u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(255u)))); |
| x = (x >> b8); |
| let b4 = select(vec3<u32>(4u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(15u)))); |
| x = (x >> b4); |
| let b2 = select(vec3<u32>(2u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(3u)))); |
| x = (x >> b2); |
| let b1 = select(vec3<u32>(1u), vec3<u32>(0u), vec3<bool>((x & vec3<u32>(1u)))); |
| let is_zero = select(vec3<u32>(0u), vec3<u32>(4294967295u), (x == vec3<u32>(0u))); |
| return vec3<u32>((((((b16 | b8) | b4) | b2) | b1) | is_zero)); |
| } |
| |
| fn f() { |
| let v = 15u; |
| let r : vec3<u32> = tint_first_trailing_bit(vec3<u32>(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillFirstTrailingBit()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // insertBits |
| //////////////////////////////////////////////////////////////////////////////// |
| DataMap polyfillInsertBits(Level level) { |
| BuiltinPolyfill::Builtins builtins; |
| builtins.insert_bits = level; |
| DataMap data; |
| data.Add<BuiltinPolyfill::Config>(builtins); |
| return data; |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunInsertBits) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234i; |
| insertBits(v, 5678, 5u, 6u); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src, polyfillInsertBits(Level::kNone))); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillInsertBits(Level::kClampParameters))); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillInsertBits(Level::kFull))); |
| } |
| |
| // TODO(crbug.com/tint/1581): Enable once `insertBits` is implemented as @const |
| TEST_F(BuiltinPolyfillTest, DISABLED_InsertBits_ConstantExpression) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234i; |
| let r : i32 = insertBits(v, 5678, 5u, 6u); |
| } |
| )"; |
| |
| auto* expect = src; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillInsertBits(Level::kFull)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, InsertBits_Full_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234i; |
| let r : i32 = insertBits(v, 5678, 5u, 6u); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_insert_bits(v : i32, n : i32, offset : u32, count : u32) -> i32 { |
| let s = min(offset, 32u); |
| let e = min(32u, (s + count)); |
| let mask = (((1u << s) - 1u) ^ ((1u << e) - 1u)); |
| return (((n << s) & i32(mask)) | (v & i32(~(mask)))); |
| } |
| |
| fn f() { |
| let v = 1234i; |
| let r : i32 = tint_insert_bits(v, 5678, 5u, 6u); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillInsertBits(Level::kFull)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, InsertBits_Full_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234u; |
| let r : u32 = insertBits(v, 5678u, 5u, 6u); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_insert_bits(v : u32, n : u32, offset : u32, count : u32) -> u32 { |
| let s = min(offset, 32u); |
| let e = min(32u, (s + count)); |
| let mask = (((1u << s) - 1u) ^ ((1u << e) - 1u)); |
| return (((n << s) & mask) | (v & ~(mask))); |
| } |
| |
| fn f() { |
| let v = 1234u; |
| let r : u32 = tint_insert_bits(v, 5678u, 5u, 6u); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillInsertBits(Level::kFull)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, InsertBits_Full_vec3_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234i; |
| let r : vec3<i32> = insertBits(vec3<i32>(v), vec3<i32>(5678), 5u, 6u); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_insert_bits(v : vec3<i32>, n : vec3<i32>, offset : u32, count : u32) -> vec3<i32> { |
| let s = min(offset, 32u); |
| let e = min(32u, (s + count)); |
| let mask = (((1u << s) - 1u) ^ ((1u << e) - 1u)); |
| return (((n << vec3<u32>(s)) & vec3<i32>(i32(mask))) | (v & vec3<i32>(i32(~(mask))))); |
| } |
| |
| fn f() { |
| let v = 1234i; |
| let r : vec3<i32> = tint_insert_bits(vec3<i32>(v), vec3<i32>(5678), 5u, 6u); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillInsertBits(Level::kFull)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, InsertBits_Full_vec3_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234u; |
| let r : vec3<u32> = insertBits(vec3<u32>(v), vec3<u32>(5678u), 5u, 6u); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_insert_bits(v : vec3<u32>, n : vec3<u32>, offset : u32, count : u32) -> vec3<u32> { |
| let s = min(offset, 32u); |
| let e = min(32u, (s + count)); |
| let mask = (((1u << s) - 1u) ^ ((1u << e) - 1u)); |
| return (((n << vec3<u32>(s)) & vec3<u32>(mask)) | (v & vec3<u32>(~(mask)))); |
| } |
| |
| fn f() { |
| let v = 1234u; |
| let r : vec3<u32> = tint_insert_bits(vec3<u32>(v), vec3<u32>(5678u), 5u, 6u); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillInsertBits(Level::kFull)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, InsertBits_Clamp_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234i; |
| let r : i32 = insertBits(v, 5678, 5u, 6u); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_insert_bits(v : i32, n : i32, offset : u32, count : u32) -> i32 { |
| let s = min(offset, 32u); |
| let e = min(32u, (s + count)); |
| return insertBits(v, n, s, (e - s)); |
| } |
| |
| fn f() { |
| let v = 1234i; |
| let r : i32 = tint_insert_bits(v, 5678, 5u, 6u); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillInsertBits(Level::kClampParameters)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, InsertBits_Clamp_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234u; |
| let r : u32 = insertBits(v, 5678u, 5u, 6u); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_insert_bits(v : u32, n : u32, offset : u32, count : u32) -> u32 { |
| let s = min(offset, 32u); |
| let e = min(32u, (s + count)); |
| return insertBits(v, n, s, (e - s)); |
| } |
| |
| fn f() { |
| let v = 1234u; |
| let r : u32 = tint_insert_bits(v, 5678u, 5u, 6u); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillInsertBits(Level::kClampParameters)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, InsertBits_Clamp_vec3_i32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234i; |
| let r : vec3<i32> = insertBits(vec3<i32>(v), vec3<i32>(5678), 5u, 6u); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_insert_bits(v : vec3<i32>, n : vec3<i32>, offset : u32, count : u32) -> vec3<i32> { |
| let s = min(offset, 32u); |
| let e = min(32u, (s + count)); |
| return insertBits(v, n, s, (e - s)); |
| } |
| |
| fn f() { |
| let v = 1234i; |
| let r : vec3<i32> = tint_insert_bits(vec3<i32>(v), vec3<i32>(5678), 5u, 6u); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillInsertBits(Level::kClampParameters)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, InsertBits_Clamp_vec3_u32) { |
| auto* src = R"( |
| fn f() { |
| let v = 1234u; |
| let r : vec3<u32> = insertBits(vec3<u32>(v), vec3<u32>(5678u), 5u, 6u); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_insert_bits(v : vec3<u32>, n : vec3<u32>, offset : u32, count : u32) -> vec3<u32> { |
| let s = min(offset, 32u); |
| let e = min(32u, (s + count)); |
| return insertBits(v, n, s, (e - s)); |
| } |
| |
| fn f() { |
| let v = 1234u; |
| let r : vec3<u32> = tint_insert_bits(vec3<u32>(v), vec3<u32>(5678u), 5u, 6u); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillInsertBits(Level::kClampParameters)); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // saturate |
| //////////////////////////////////////////////////////////////////////////////// |
| DataMap polyfillSaturate() { |
| BuiltinPolyfill::Builtins builtins; |
| builtins.saturate = true; |
| DataMap data; |
| data.Add<BuiltinPolyfill::Config>(builtins); |
| return data; |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunSaturate) { |
| auto* src = R"( |
| fn f() { |
| let v = 0.5f; |
| saturate(v); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillSaturate())); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, Saturate_ConstantExpression) { |
| auto* src = R"( |
| fn f() { |
| let r : f32 = saturate(0.5); |
| } |
| )"; |
| |
| auto* expect = src; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillSaturate()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, Saturate_f32) { |
| auto* src = R"( |
| fn f() { |
| let v = 0.5f; |
| let r : f32 = saturate(v); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_saturate(v : f32) -> f32 { |
| return clamp(v, f32(0), f32(1)); |
| } |
| |
| fn f() { |
| let v = 0.5f; |
| let r : f32 = tint_saturate(v); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillSaturate()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, Saturate_f16) { |
| auto* src = R"( |
| enable f16; |
| |
| fn f() { |
| let v = 0.5h; |
| let r : f16 = saturate(v); |
| } |
| )"; |
| |
| auto* expect = R"( |
| enable f16; |
| |
| fn tint_saturate(v : f16) -> f16 { |
| return clamp(v, f16(0), f16(1)); |
| } |
| |
| fn f() { |
| let v = 0.5h; |
| let r : f16 = tint_saturate(v); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillSaturate()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, Saturate_vec3_f32) { |
| auto* src = R"( |
| fn f() { |
| let v = 0.5f; |
| let r : vec3<f32> = saturate(vec3<f32>(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_saturate(v : vec3<f32>) -> vec3<f32> { |
| return clamp(v, vec3<f32>(0), vec3<f32>(1)); |
| } |
| |
| fn f() { |
| let v = 0.5f; |
| let r : vec3<f32> = tint_saturate(vec3<f32>(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillSaturate()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, Saturate_vec3_f16) { |
| auto* src = R"( |
| enable f16; |
| |
| fn f() { |
| let v = 0.5h; |
| let r : vec3<f16> = saturate(vec3<f16>(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| enable f16; |
| |
| fn tint_saturate(v : vec3<f16>) -> vec3<f16> { |
| return clamp(v, vec3<f16>(0), vec3<f16>(1)); |
| } |
| |
| fn f() { |
| let v = 0.5h; |
| let r : vec3<f16> = tint_saturate(vec3<f16>(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillSaturate()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // textureSampleBaseClampToEdge |
| //////////////////////////////////////////////////////////////////////////////// |
| DataMap polyfillTextureSampleBaseClampToEdge_2d_f32() { |
| BuiltinPolyfill::Builtins builtins; |
| builtins.texture_sample_base_clamp_to_edge_2d_f32 = true; |
| DataMap data; |
| data.Add<BuiltinPolyfill::Config>(builtins); |
| return data; |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunTextureSampleBaseClampToEdge_2d_f32) { |
| auto* src = R"( |
| @group(0) @binding(0) var t : texture_2d<f32>; |
| @group(0) @binding(1) var s : sampler; |
| |
| fn f() { |
| textureSampleBaseClampToEdge(t, s, vec2<f32>(0.5)); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillTextureSampleBaseClampToEdge_2d_f32())); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunTextureSampleBaseClampToEdge_external) { |
| auto* src = R"( |
| @group(0) @binding(0) var t : texture_external; |
| @group(0) @binding(1) var s : sampler; |
| |
| fn f() { |
| textureSampleBaseClampToEdge(t, s, vec2<f32>(0.5)); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src, polyfillTextureSampleBaseClampToEdge_2d_f32())); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, TextureSampleBaseClampToEdge_2d_f32_f32) { |
| auto* src = R"( |
| @group(0) @binding(0) var t : texture_2d<f32>; |
| @group(0) @binding(1) var s : sampler; |
| |
| fn f() { |
| let r = textureSampleBaseClampToEdge(t, s, vec2<f32>(0.5)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_textureSampleBaseClampToEdge(t : texture_2d<f32>, s : sampler, coord : vec2<f32>) -> vec4<f32> { |
| let dims = vec2<f32>(textureDimensions(t, 0)); |
| let half_texel = (vec2<f32>(0.5) / dims); |
| let clamped = clamp(coord, half_texel, (1 - half_texel)); |
| return textureSampleLevel(t, s, clamped, 0); |
| } |
| |
| @group(0) @binding(0) var t : texture_2d<f32>; |
| |
| @group(0) @binding(1) var s : sampler; |
| |
| fn f() { |
| let r = tint_textureSampleBaseClampToEdge(t, s, vec2<f32>(0.5)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillTextureSampleBaseClampToEdge_2d_f32()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // quantizeToF16 |
| //////////////////////////////////////////////////////////////////////////////// |
| DataMap polyfillQuantizeToF16_2d_f32() { |
| BuiltinPolyfill::Builtins builtins; |
| builtins.quantize_to_vec_f16 = true; |
| DataMap data; |
| data.Add<BuiltinPolyfill::Config>(builtins); |
| return data; |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunQuantizeToF16_Scalar) { |
| auto* src = R"( |
| fn f() { |
| let v = 0.5; |
| quantizeToF16(0.5); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src, polyfillQuantizeToF16_2d_f32())); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, ShouldRunQuantizeToF16_Vector) { |
| auto* src = R"( |
| fn f() { |
| let v = 0.5; |
| quantizeToF16(vec2(v)); |
| } |
| )"; |
| |
| EXPECT_FALSE(ShouldRun<BuiltinPolyfill>(src)); |
| EXPECT_TRUE(ShouldRun<BuiltinPolyfill>(src, polyfillQuantizeToF16_2d_f32())); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, QuantizeToF16_Vec2) { |
| auto* src = R"( |
| fn f() { |
| let v = 0.5; |
| quantizeToF16(vec2(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_quantizeToF16(v : vec2<f32>) -> vec2<f32> { |
| return vec2<f32>(quantizeToF16(v[0u]), quantizeToF16(v[1u])); |
| } |
| |
| fn f() { |
| let v = 0.5; |
| tint_quantizeToF16(vec2(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillQuantizeToF16_2d_f32()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, QuantizeToF16_Vec3) { |
| auto* src = R"( |
| fn f() { |
| let v = 0.5; |
| quantizeToF16(vec3(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_quantizeToF16(v : vec3<f32>) -> vec3<f32> { |
| return vec3<f32>(quantizeToF16(v[0u]), quantizeToF16(v[1u]), quantizeToF16(v[2u])); |
| } |
| |
| fn f() { |
| let v = 0.5; |
| tint_quantizeToF16(vec3(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillQuantizeToF16_2d_f32()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| TEST_F(BuiltinPolyfillTest, QuantizeToF16_Vec4) { |
| auto* src = R"( |
| fn f() { |
| let v = 0.5; |
| quantizeToF16(vec4(v)); |
| } |
| )"; |
| |
| auto* expect = R"( |
| fn tint_quantizeToF16(v : vec4<f32>) -> vec4<f32> { |
| return vec4<f32>(quantizeToF16(v[0u]), quantizeToF16(v[1u]), quantizeToF16(v[2u]), quantizeToF16(v[3u])); |
| } |
| |
| fn f() { |
| let v = 0.5; |
| tint_quantizeToF16(vec4(v)); |
| } |
| )"; |
| |
| auto got = Run<BuiltinPolyfill>(src, polyfillQuantizeToF16_2d_f32()); |
| |
| EXPECT_EQ(expect, str(got)); |
| } |
| |
| } // namespace |
| } // namespace tint::transform |