| # Copyright 2012 The Dawn Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| import("../../scripts/dawn_overrides_with_defaults.gni") |
| |
| import("//testing/test.gni") |
| import("${dawn_root}/generator/dawn_generator.gni") |
| import("${dawn_root}/scripts/dawn_features.gni") |
| |
| group("dawn_tests") { |
| testonly = true |
| deps = [ |
| ":dawn_end2end_tests", |
| ":dawn_perf_tests", |
| ":dawn_unittests", |
| ] |
| } |
| |
| ############################################################################### |
| # Gtest Gmock - Handle building inside and outside of Chromium. |
| ############################################################################### |
| |
| # When building outside of Chromium we need to define our own targets for GTest |
| # and GMock. However when compiling inside of Chromium we need to reuse the |
| # existing targets, both because Chromium has a special harness for swarming |
| # and because otherwise the "gn check" fails. |
| |
| if (!build_with_chromium) { |
| # When we aren't in Chromium we define out own targets based on the location |
| # of the googletest repo. |
| googletest_dir = dawn_googletest_dir |
| |
| config("gtest_config") { |
| include_dirs = [ |
| "${googletest_dir}/googletest", |
| "${googletest_dir}/googletest/include", |
| ] |
| } |
| |
| static_library("gtest") { |
| testonly = true |
| sources = [ "${googletest_dir}/googletest/src/gtest-all.cc" ] |
| public_configs = [ ":gtest_config" ] |
| } |
| |
| config("gmock_config") { |
| include_dirs = [ |
| "${googletest_dir}/googlemock", |
| "${googletest_dir}/googlemock/include", |
| "${googletest_dir}/googletest/include", |
| ] |
| } |
| |
| static_library("gmock") { |
| testonly = true |
| sources = [ "${googletest_dir}/googlemock/src/gmock-all.cc" ] |
| public_configs = [ ":gmock_config" ] |
| } |
| |
| group("gmock_and_gtest") { |
| testonly = true |
| public_deps = [ |
| ":gmock", |
| ":gtest", |
| ] |
| } |
| } else { |
| # When we are in Chromium we reuse its targets, and also add some deps that |
| # are needed to launch the test in swarming mode. |
| group("gmock_and_gtest") { |
| testonly = true |
| public_deps = [ |
| "//base", |
| "//base/test:test_support", |
| "//testing/gmock", |
| "//testing/gtest", |
| ] |
| } |
| } |
| |
| ############################################################################### |
| # Wrapping of Chromium targets |
| ############################################################################### |
| |
| # These targets are separated because they are Chromium sources files that |
| # can't use the dawn_internal config, otherwise Dawn's warning flags get |
| # applied while compiling a bunch of Chromium's //base (via header inclusion) |
| if (build_with_chromium) { |
| source_set("dawn_unittests_main") { |
| testonly = true |
| deps = [ ":gmock_and_gtest" ] |
| sources = [ "//gpu/dawn_unittests_main.cc" ] |
| } |
| source_set("dawn_end2end_tests_main") { |
| testonly = true |
| deps = [ ":gmock_and_gtest" ] |
| sources = [ "//gpu/dawn_end2end_tests_main.cc" ] |
| } |
| source_set("dawn_perf_tests_main") { |
| testonly = true |
| deps = [ ":gmock_and_gtest" ] |
| sources = [ "//gpu/dawn_perf_tests_main.cc" ] |
| } |
| } |
| |
| ############################################################################### |
| # Dawn unittests |
| ############################################################################### |
| |
| dawn_json_generator("mock_webgpu_gen") { |
| target = "mock_webgpu" |
| outputs = [ |
| "src/dawn/mock_webgpu.h", |
| "src/dawn/mock_webgpu.cpp", |
| ] |
| } |
| |
| test("dawn_unittests") { |
| configs += [ "${dawn_root}/src/common:dawn_internal" ] |
| |
| deps = [ |
| ":gmock_and_gtest", |
| ":mock_webgpu_gen", |
| "${dawn_root}/src/common", |
| "${dawn_root}/src/dawn:dawn_proc", |
| "${dawn_root}/src/dawn:dawncpp", |
| "${dawn_root}/src/dawn_native", |
| "${dawn_root}/src/dawn_native:dawn_native_sources", |
| "${dawn_root}/src/dawn_wire", |
| "${dawn_root}/src/utils:dawn_utils", |
| ] |
| |
| # Add internal dawn_native config for internal unittests. |
| configs += [ "${dawn_root}/src/dawn_native:dawn_native_internal" ] |
| |
| sources = get_target_outputs(":mock_webgpu_gen") |
| sources += [ |
| "${dawn_root}/src/dawn_wire/client/ClientMemoryTransferService_mock.cpp", |
| "${dawn_root}/src/dawn_wire/client/ClientMemoryTransferService_mock.h", |
| "${dawn_root}/src/dawn_wire/server/ServerMemoryTransferService_mock.cpp", |
| "${dawn_root}/src/dawn_wire/server/ServerMemoryTransferService_mock.h", |
| "MockCallback.h", |
| "unittests/BitSetIteratorTests.cpp", |
| "unittests/BuddyAllocatorTests.cpp", |
| "unittests/BuddyMemoryAllocatorTests.cpp", |
| "unittests/CommandAllocatorTests.cpp", |
| "unittests/EnumClassBitmasksTests.cpp", |
| "unittests/EnumMaskIteratorTests.cpp", |
| "unittests/ErrorTests.cpp", |
| "unittests/ExtensionTests.cpp", |
| "unittests/GetProcAddressTests.cpp", |
| "unittests/ITypArrayTests.cpp", |
| "unittests/ITypBitsetTests.cpp", |
| "unittests/ITypSpanTests.cpp", |
| "unittests/ITypVectorTests.cpp", |
| "unittests/LinkedListTests.cpp", |
| "unittests/MathTests.cpp", |
| "unittests/ObjectBaseTests.cpp", |
| "unittests/PerStageTests.cpp", |
| "unittests/PerThreadProcTests.cpp", |
| "unittests/PlacementAllocatedTests.cpp", |
| "unittests/RefCountedTests.cpp", |
| "unittests/ResultTests.cpp", |
| "unittests/RingBufferAllocatorTests.cpp", |
| "unittests/SerialMapTests.cpp", |
| "unittests/SerialQueueTests.cpp", |
| "unittests/SlabAllocatorTests.cpp", |
| "unittests/StackContainerTests.cpp", |
| "unittests/SystemUtilsTests.cpp", |
| "unittests/ToBackendTests.cpp", |
| "unittests/TypedIntegerTests.cpp", |
| "unittests/validation/BindGroupValidationTests.cpp", |
| "unittests/validation/BufferValidationTests.cpp", |
| "unittests/validation/CommandBufferValidationTests.cpp", |
| "unittests/validation/ComputeIndirectValidationTests.cpp", |
| "unittests/validation/ComputeValidationTests.cpp", |
| "unittests/validation/CopyCommandsValidationTests.cpp", |
| "unittests/validation/DebugMarkerValidationTests.cpp", |
| "unittests/validation/DrawIndirectValidationTests.cpp", |
| "unittests/validation/DynamicStateCommandValidationTests.cpp", |
| "unittests/validation/ErrorScopeValidationTests.cpp", |
| "unittests/validation/FenceValidationTests.cpp", |
| "unittests/validation/GetBindGroupLayoutValidationTests.cpp", |
| "unittests/validation/IndexBufferValidationTests.cpp", |
| "unittests/validation/MinimumBufferSizeValidationTests.cpp", |
| "unittests/validation/QuerySetValidationTests.cpp", |
| "unittests/validation/QueueSubmitValidationTests.cpp", |
| "unittests/validation/QueueWriteTextureValidationTests.cpp", |
| "unittests/validation/RenderBundleValidationTests.cpp", |
| "unittests/validation/RenderPassDescriptorValidationTests.cpp", |
| "unittests/validation/RenderPipelineValidationTests.cpp", |
| "unittests/validation/ResourceUsageTrackingTests.cpp", |
| "unittests/validation/SamplerValidationTests.cpp", |
| "unittests/validation/ShaderModuleValidationTests.cpp", |
| "unittests/validation/StorageTextureValidationTests.cpp", |
| "unittests/validation/TextureSubresourceTests.cpp", |
| "unittests/validation/TextureValidationTests.cpp", |
| "unittests/validation/TextureViewValidationTests.cpp", |
| "unittests/validation/ToggleValidationTests.cpp", |
| "unittests/validation/UnsafeAPIValidationTests.cpp", |
| "unittests/validation/ValidationTest.cpp", |
| "unittests/validation/ValidationTest.h", |
| "unittests/validation/VertexBufferValidationTests.cpp", |
| "unittests/validation/VertexStateValidationTests.cpp", |
| "unittests/wire/WireArgumentTests.cpp", |
| "unittests/wire/WireBasicTests.cpp", |
| "unittests/wire/WireBufferMappingTests.cpp", |
| "unittests/wire/WireCreateReadyPipelineTests.cpp", |
| "unittests/wire/WireDisconnectTests.cpp", |
| "unittests/wire/WireErrorCallbackTests.cpp", |
| "unittests/wire/WireExtensionTests.cpp", |
| "unittests/wire/WireFenceTests.cpp", |
| "unittests/wire/WireInjectTextureTests.cpp", |
| "unittests/wire/WireMemoryTransferServiceTests.cpp", |
| "unittests/wire/WireMultipleDeviceTests.cpp", |
| "unittests/wire/WireOptionalTests.cpp", |
| "unittests/wire/WireTest.cpp", |
| "unittests/wire/WireTest.h", |
| "unittests/wire/WireWGPUDevicePropertiesTests.cpp", |
| ] |
| |
| if (dawn_enable_d3d12) { |
| sources += [ "unittests/d3d12/CopySplitTests.cpp" ] |
| } |
| |
| # When building inside Chromium, use their gtest main function because it is |
| # needed to run in swarming correctly. |
| if (build_with_chromium) { |
| deps += [ ":dawn_unittests_main" ] |
| } else { |
| sources += [ "UnittestsMain.cpp" ] |
| } |
| } |
| |
| ############################################################################### |
| # Dawn end2end tests targets |
| ############################################################################### |
| |
| source_set("dawn_end2end_tests_sources") { |
| configs += [ "${dawn_root}/src/common:dawn_internal" ] |
| testonly = true |
| |
| deps = [ |
| ":gmock_and_gtest", |
| "${dawn_root}/src/common", |
| "${dawn_root}/src/dawn:dawn_proc", |
| "${dawn_root}/src/dawn:dawncpp", |
| "${dawn_root}/src/dawn_native", |
| "${dawn_root}/src/dawn_wire", |
| "${dawn_root}/src/utils:dawn_utils", |
| ] |
| |
| sources = [ |
| "DawnTest.h", |
| "end2end/BasicTests.cpp", |
| "end2end/BindGroupTests.cpp", |
| "end2end/BufferTests.cpp", |
| "end2end/BufferZeroInitTests.cpp", |
| "end2end/ClipSpaceTests.cpp", |
| "end2end/ColorStateTests.cpp", |
| "end2end/CompressedTextureFormatTests.cpp", |
| "end2end/ComputeCopyStorageBufferTests.cpp", |
| "end2end/ComputeIndirectTests.cpp", |
| "end2end/ComputeSharedMemoryTests.cpp", |
| "end2end/ComputeStorageBufferBarrierTests.cpp", |
| "end2end/CopyTests.cpp", |
| "end2end/CopyTextureForBrowserTests.cpp", |
| "end2end/CreateReadyPipelineTests.cpp", |
| "end2end/CullingTests.cpp", |
| "end2end/DebugMarkerTests.cpp", |
| "end2end/DeprecatedAPITests.cpp", |
| "end2end/DepthBiasTests.cpp", |
| "end2end/DepthStencilCopyTests.cpp", |
| "end2end/DepthStencilSamplingTests.cpp", |
| "end2end/DepthStencilStateTests.cpp", |
| "end2end/DestroyTests.cpp", |
| "end2end/DeviceLostTests.cpp", |
| "end2end/DrawIndexedIndirectTests.cpp", |
| "end2end/DrawIndexedTests.cpp", |
| "end2end/DrawIndirectTests.cpp", |
| "end2end/DrawTests.cpp", |
| "end2end/DynamicBufferOffsetTests.cpp", |
| "end2end/EntryPointTests.cpp", |
| "end2end/FenceTests.cpp", |
| "end2end/GpuMemorySynchronizationTests.cpp", |
| "end2end/IndexFormatTests.cpp", |
| "end2end/MultisampledRenderingTests.cpp", |
| "end2end/MultisampledSamplingTests.cpp", |
| "end2end/NonzeroBufferCreationTests.cpp", |
| "end2end/NonzeroTextureCreationTests.cpp", |
| "end2end/ObjectCachingTests.cpp", |
| "end2end/OpArrayLengthTests.cpp", |
| "end2end/PipelineLayoutTests.cpp", |
| "end2end/PrimitiveTopologyTests.cpp", |
| "end2end/QueryTests.cpp", |
| "end2end/QueueTests.cpp", |
| "end2end/QueueTimelineTests.cpp", |
| "end2end/RenderBundleTests.cpp", |
| "end2end/RenderPassLoadOpTests.cpp", |
| "end2end/RenderPassTests.cpp", |
| "end2end/SamplerTests.cpp", |
| "end2end/ScissorTests.cpp", |
| "end2end/ShaderFloat16Tests.cpp", |
| "end2end/StorageTextureTests.cpp", |
| "end2end/SubresourceRenderAttachmentTests.cpp", |
| "end2end/TextureFormatTests.cpp", |
| "end2end/TextureSubresourceTests.cpp", |
| "end2end/TextureViewTests.cpp", |
| "end2end/TextureZeroInitTests.cpp", |
| "end2end/VertexFormatTests.cpp", |
| "end2end/VertexStateTests.cpp", |
| "end2end/ViewportOrientationTests.cpp", |
| "end2end/ViewportTests.cpp", |
| ] |
| |
| # Validation tests that need OS windows live in end2end tests. |
| sources += [ |
| "unittests/validation/ValidationTest.cpp", |
| "unittests/validation/ValidationTest.h", |
| ] |
| |
| libs = [] |
| |
| if (dawn_enable_d3d12) { |
| sources += [ |
| "end2end/D3D12CachingTests.cpp", |
| "end2end/D3D12ResourceWrappingTests.cpp", |
| ] |
| libs += [ |
| "d3d11.lib", |
| "dxgi.lib", |
| ] |
| } |
| |
| if (dawn_enable_metal) { |
| sources += [ "end2end/IOSurfaceWrappingTests.cpp" ] |
| frameworks = [ "IOSurface.framework" ] |
| } |
| |
| if (dawn_enable_wgsl) { |
| sources += [ "end2end/VertexBufferRobustnessTests.cpp" ] |
| } |
| |
| if (dawn_enable_opengl) { |
| assert(dawn_supports_glfw_for_windowing) |
| } |
| |
| if (dawn_supports_glfw_for_windowing) { |
| sources += [ |
| "end2end/SwapChainTests.cpp", |
| "end2end/SwapChainValidationTests.cpp", |
| "end2end/WindowSurfaceTests.cpp", |
| ] |
| deps += [ "${dawn_root}/src/utils:dawn_glfw" ] |
| } |
| } |
| |
| source_set("dawn_white_box_tests_sources") { |
| configs += [ "${dawn_root}/src/dawn_native:dawn_native_internal" ] |
| testonly = true |
| |
| deps = [ |
| ":gmock_and_gtest", |
| "${dawn_root}/src/common", |
| "${dawn_root}/src/dawn:dawn_proc", |
| "${dawn_root}/src/dawn:dawncpp", |
| "${dawn_root}/src/dawn_native:dawn_native_sources", |
| "${dawn_root}/src/dawn_wire", |
| "${dawn_root}/src/utils:dawn_utils", |
| |
| # Static because the tests both link against and have dawn_native |
| # sources. MSVC errors when both importing and exporting symbols. |
| "${dawn_root}/src/dawn_native:dawn_native_static", |
| ] |
| |
| sources = [ "DawnTest.h" ] |
| |
| if (dawn_enable_vulkan) { |
| deps += [ "${dawn_root}/third_party/khronos:vulkan_headers" ] |
| |
| if (is_chromeos) { |
| sources += [ "white_box/VulkanImageWrappingTestsDmaBuf.cpp" ] |
| } else if (is_linux) { |
| sources += [ "white_box/VulkanImageWrappingTestsOpaqueFD.cpp" ] |
| } |
| |
| if (dawn_enable_error_injection) { |
| sources += [ "white_box/VulkanErrorInjectorTests.cpp" ] |
| } |
| } |
| |
| sources += [ "white_box/InternalResourceUsageTests.cpp" ] |
| |
| if (dawn_enable_d3d12) { |
| sources += [ |
| "white_box/D3D12DescriptorHeapTests.cpp", |
| "white_box/D3D12ResidencyTests.cpp", |
| "white_box/D3D12ResourceHeapTests.cpp", |
| ] |
| } |
| |
| if (dawn_enable_metal) { |
| sources += [ "white_box/MetalAutoreleasePoolTests.mm" ] |
| } |
| |
| if (dawn_enable_opengl) { |
| deps += [ "${dawn_root}/src/utils:dawn_glfw" ] |
| } |
| |
| libs = [] |
| } |
| |
| test("dawn_end2end_tests") { |
| configs += [ "${dawn_root}/src/common:dawn_internal" ] |
| |
| deps = [ |
| ":dawn_end2end_tests_sources", |
| ":dawn_white_box_tests_sources", |
| ":gmock_and_gtest", |
| "${dawn_root}/src/common", |
| "${dawn_root}/src/dawn:dawn_proc", |
| "${dawn_root}/src/dawn:dawncpp", |
| "${dawn_root}/src/dawn_native", |
| "${dawn_root}/src/dawn_wire", |
| "${dawn_root}/src/utils:dawn_utils", |
| ] |
| |
| sources = [ |
| "DawnTest.cpp", |
| "DawnTest.h", |
| ] |
| |
| libs = [] |
| |
| # When building inside Chromium, use their gtest main function because it is |
| # needed to run in swarming correctly. |
| if (build_with_chromium) { |
| deps += [ ":dawn_end2end_tests_main" ] |
| } else { |
| sources += [ "End2EndTestsMain.cpp" ] |
| } |
| |
| if (dawn_enable_opengl) { |
| deps += [ "${dawn_root}/src/utils:dawn_glfw" ] |
| } |
| |
| if (is_chromeos) { |
| libs += [ "gbm" ] |
| } |
| } |
| |
| ############################################################################### |
| # Dawn perf tests |
| ############################################################################### |
| |
| test("dawn_perf_tests") { |
| configs += [ "${dawn_root}/src/common:dawn_internal" ] |
| |
| deps = [ |
| ":gmock_and_gtest", |
| "${dawn_root}/src/common", |
| "${dawn_root}/src/dawn:dawn_proc", |
| "${dawn_root}/src/dawn:dawncpp", |
| "${dawn_root}/src/dawn_native", |
| "${dawn_root}/src/dawn_platform", |
| "${dawn_root}/src/dawn_wire", |
| "${dawn_root}/src/utils:dawn_utils", |
| ] |
| |
| sources = [ |
| "DawnTest.cpp", |
| "DawnTest.h", |
| "ParamGenerator.h", |
| "perf_tests/BufferUploadPerf.cpp", |
| "perf_tests/DawnPerfTest.cpp", |
| "perf_tests/DawnPerfTest.h", |
| "perf_tests/DawnPerfTestPlatform.cpp", |
| "perf_tests/DawnPerfTestPlatform.h", |
| "perf_tests/DrawCallPerf.cpp", |
| ] |
| |
| libs = [] |
| |
| # When building inside Chromium, use their gtest main function and the |
| # other perf test scaffolding in order to run in swarming correctly. |
| if (build_with_chromium) { |
| deps += [ ":dawn_perf_tests_main" ] |
| data_deps = [ "//testing:run_perf_test" ] |
| } else { |
| sources += [ "PerfTestsMain.cpp" ] |
| } |
| |
| if (dawn_enable_metal) { |
| frameworks = [ "IOSurface.framework" ] |
| } |
| |
| if (dawn_enable_opengl) { |
| deps += [ "${dawn_root}/src/utils:dawn_glfw" ] |
| } |
| } |