| // Copyright 2017 The Dawn Authors |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "dawn_native/metal/CommandBufferMTL.h" |
| |
| #include "dawn_native/BindGroupTracker.h" |
| #include "dawn_native/CommandEncoder.h" |
| #include "dawn_native/Commands.h" |
| #include "dawn_native/ExternalTexture.h" |
| #include "dawn_native/RenderBundle.h" |
| #include "dawn_native/metal/BindGroupMTL.h" |
| #include "dawn_native/metal/BufferMTL.h" |
| #include "dawn_native/metal/ComputePipelineMTL.h" |
| #include "dawn_native/metal/DeviceMTL.h" |
| #include "dawn_native/metal/PipelineLayoutMTL.h" |
| #include "dawn_native/metal/QuerySetMTL.h" |
| #include "dawn_native/metal/RenderPipelineMTL.h" |
| #include "dawn_native/metal/SamplerMTL.h" |
| #include "dawn_native/metal/TextureMTL.h" |
| #include "dawn_native/metal/UtilsMetal.h" |
| |
| namespace dawn_native { namespace metal { |
| |
| namespace { |
| |
| // Allows this file to use MTLStoreActionStoreAndMultismapleResolve because the logic is |
| // first to compute what the "best" Metal render pass descriptor is, then fix it up if we |
| // are not on macOS 10.12 (i.e. the EmulateStoreAndMSAAResolve toggle is on). |
| #pragma clang diagnostic push |
| #pragma clang diagnostic ignored "-Wunguarded-availability" |
| constexpr MTLStoreAction kMTLStoreActionStoreAndMultisampleResolve = |
| MTLStoreActionStoreAndMultisampleResolve; |
| #pragma clang diagnostic pop |
| |
| MTLIndexType MTLIndexFormat(wgpu::IndexFormat format) { |
| switch (format) { |
| case wgpu::IndexFormat::Uint16: |
| return MTLIndexTypeUInt16; |
| case wgpu::IndexFormat::Uint32: |
| return MTLIndexTypeUInt32; |
| case wgpu::IndexFormat::Undefined: |
| UNREACHABLE(); |
| } |
| } |
| |
| NSRef<MTLRenderPassDescriptor> CreateMTLRenderPassDescriptor( |
| BeginRenderPassCmd* renderPass) { |
| // Note that this creates a descriptor that's autoreleased so we don't use AcquireNSRef |
| NSRef<MTLRenderPassDescriptor> descriptorRef = |
| [MTLRenderPassDescriptor renderPassDescriptor]; |
| MTLRenderPassDescriptor* descriptor = descriptorRef.Get(); |
| |
| for (ColorAttachmentIndex attachment : |
| IterateBitSet(renderPass->attachmentState->GetColorAttachmentsMask())) { |
| uint8_t i = static_cast<uint8_t>(attachment); |
| auto& attachmentInfo = renderPass->colorAttachments[attachment]; |
| |
| switch (attachmentInfo.loadOp) { |
| case wgpu::LoadOp::Clear: |
| descriptor.colorAttachments[i].loadAction = MTLLoadActionClear; |
| descriptor.colorAttachments[i].clearColor = MTLClearColorMake( |
| attachmentInfo.clearColor.r, attachmentInfo.clearColor.g, |
| attachmentInfo.clearColor.b, attachmentInfo.clearColor.a); |
| break; |
| |
| case wgpu::LoadOp::Load: |
| descriptor.colorAttachments[i].loadAction = MTLLoadActionLoad; |
| break; |
| } |
| |
| descriptor.colorAttachments[i].texture = |
| ToBackend(attachmentInfo.view->GetTexture())->GetMTLTexture(); |
| descriptor.colorAttachments[i].level = attachmentInfo.view->GetBaseMipLevel(); |
| descriptor.colorAttachments[i].slice = attachmentInfo.view->GetBaseArrayLayer(); |
| |
| bool hasResolveTarget = attachmentInfo.resolveTarget != nullptr; |
| if (hasResolveTarget) { |
| descriptor.colorAttachments[i].resolveTexture = |
| ToBackend(attachmentInfo.resolveTarget->GetTexture())->GetMTLTexture(); |
| descriptor.colorAttachments[i].resolveLevel = |
| attachmentInfo.resolveTarget->GetBaseMipLevel(); |
| descriptor.colorAttachments[i].resolveSlice = |
| attachmentInfo.resolveTarget->GetBaseArrayLayer(); |
| |
| switch (attachmentInfo.storeOp) { |
| case wgpu::StoreOp::Store: |
| descriptor.colorAttachments[i].storeAction = |
| kMTLStoreActionStoreAndMultisampleResolve; |
| break; |
| case wgpu::StoreOp::Discard: |
| case wgpu::StoreOp::Clear: |
| descriptor.colorAttachments[i].storeAction = |
| MTLStoreActionMultisampleResolve; |
| break; |
| } |
| } else { |
| switch (attachmentInfo.storeOp) { |
| case wgpu::StoreOp::Store: |
| descriptor.colorAttachments[i].storeAction = MTLStoreActionStore; |
| break; |
| case wgpu::StoreOp::Discard: |
| case wgpu::StoreOp::Clear: |
| descriptor.colorAttachments[i].storeAction = MTLStoreActionDontCare; |
| break; |
| } |
| } |
| } |
| |
| if (renderPass->attachmentState->HasDepthStencilAttachment()) { |
| auto& attachmentInfo = renderPass->depthStencilAttachment; |
| |
| id<MTLTexture> texture = |
| ToBackend(attachmentInfo.view->GetTexture())->GetMTLTexture(); |
| const Format& format = attachmentInfo.view->GetTexture()->GetFormat(); |
| |
| if (format.HasDepth()) { |
| descriptor.depthAttachment.texture = texture; |
| descriptor.depthAttachment.level = attachmentInfo.view->GetBaseMipLevel(); |
| descriptor.depthAttachment.slice = attachmentInfo.view->GetBaseArrayLayer(); |
| |
| switch (attachmentInfo.depthStoreOp) { |
| case wgpu::StoreOp::Store: |
| descriptor.depthAttachment.storeAction = MTLStoreActionStore; |
| break; |
| |
| case wgpu::StoreOp::Discard: |
| case wgpu::StoreOp::Clear: |
| descriptor.depthAttachment.storeAction = MTLStoreActionDontCare; |
| break; |
| } |
| |
| switch (attachmentInfo.depthLoadOp) { |
| case wgpu::LoadOp::Clear: |
| descriptor.depthAttachment.loadAction = MTLLoadActionClear; |
| descriptor.depthAttachment.clearDepth = attachmentInfo.clearDepth; |
| break; |
| |
| case wgpu::LoadOp::Load: |
| descriptor.depthAttachment.loadAction = MTLLoadActionLoad; |
| break; |
| } |
| } |
| |
| if (format.HasStencil()) { |
| descriptor.stencilAttachment.texture = texture; |
| descriptor.stencilAttachment.level = attachmentInfo.view->GetBaseMipLevel(); |
| descriptor.stencilAttachment.slice = attachmentInfo.view->GetBaseArrayLayer(); |
| |
| switch (attachmentInfo.stencilStoreOp) { |
| case wgpu::StoreOp::Store: |
| descriptor.stencilAttachment.storeAction = MTLStoreActionStore; |
| break; |
| |
| case wgpu::StoreOp::Discard: |
| case wgpu::StoreOp::Clear: |
| descriptor.stencilAttachment.storeAction = MTLStoreActionDontCare; |
| break; |
| } |
| |
| switch (attachmentInfo.stencilLoadOp) { |
| case wgpu::LoadOp::Clear: |
| descriptor.stencilAttachment.loadAction = MTLLoadActionClear; |
| descriptor.stencilAttachment.clearStencil = attachmentInfo.clearStencil; |
| break; |
| |
| case wgpu::LoadOp::Load: |
| descriptor.stencilAttachment.loadAction = MTLLoadActionLoad; |
| break; |
| } |
| } |
| } |
| |
| if (renderPass->occlusionQuerySet.Get() != nullptr) { |
| descriptor.visibilityResultBuffer = |
| ToBackend(renderPass->occlusionQuerySet.Get())->GetVisibilityBuffer(); |
| } |
| |
| return descriptorRef; |
| } |
| |
| // Helper function for Toggle EmulateStoreAndMSAAResolve |
| void ResolveInAnotherRenderPass( |
| CommandRecordingContext* commandContext, |
| const MTLRenderPassDescriptor* mtlRenderPass, |
| const std::array<id<MTLTexture>, kMaxColorAttachments>& resolveTextures) { |
| // Note that this creates a descriptor that's autoreleased so we don't use AcquireNSRef |
| NSRef<MTLRenderPassDescriptor> mtlRenderPassForResolveRef = |
| [MTLRenderPassDescriptor renderPassDescriptor]; |
| MTLRenderPassDescriptor* mtlRenderPassForResolve = mtlRenderPassForResolveRef.Get(); |
| |
| for (uint32_t i = 0; i < kMaxColorAttachments; ++i) { |
| if (resolveTextures[i] == nullptr) { |
| continue; |
| } |
| |
| mtlRenderPassForResolve.colorAttachments[i].texture = |
| mtlRenderPass.colorAttachments[i].texture; |
| mtlRenderPassForResolve.colorAttachments[i].loadAction = MTLLoadActionLoad; |
| mtlRenderPassForResolve.colorAttachments[i].storeAction = |
| MTLStoreActionMultisampleResolve; |
| mtlRenderPassForResolve.colorAttachments[i].resolveTexture = resolveTextures[i]; |
| mtlRenderPassForResolve.colorAttachments[i].resolveLevel = |
| mtlRenderPass.colorAttachments[i].resolveLevel; |
| mtlRenderPassForResolve.colorAttachments[i].resolveSlice = |
| mtlRenderPass.colorAttachments[i].resolveSlice; |
| } |
| |
| commandContext->BeginRender(mtlRenderPassForResolve); |
| commandContext->EndRender(); |
| } |
| |
| // Helper functions for Toggle AlwaysResolveIntoZeroLevelAndLayer |
| NSPRef<id<MTLTexture>> CreateResolveTextureForWorkaround(Device* device, |
| MTLPixelFormat mtlFormat, |
| uint32_t width, |
| uint32_t height) { |
| NSRef<MTLTextureDescriptor> mtlDescRef = AcquireNSRef([MTLTextureDescriptor new]); |
| MTLTextureDescriptor* mtlDesc = mtlDescRef.Get(); |
| |
| mtlDesc.textureType = MTLTextureType2D; |
| mtlDesc.usage = MTLTextureUsageRenderTarget; |
| mtlDesc.pixelFormat = mtlFormat; |
| mtlDesc.width = width; |
| mtlDesc.height = height; |
| mtlDesc.depth = 1; |
| mtlDesc.mipmapLevelCount = 1; |
| mtlDesc.arrayLength = 1; |
| mtlDesc.storageMode = MTLStorageModePrivate; |
| mtlDesc.sampleCount = 1; |
| |
| return AcquireNSPRef([device->GetMTLDevice() newTextureWithDescriptor:mtlDesc]); |
| } |
| |
| void CopyIntoTrueResolveTarget(CommandRecordingContext* commandContext, |
| id<MTLTexture> mtlTrueResolveTexture, |
| uint32_t trueResolveLevel, |
| uint32_t trueResolveSlice, |
| id<MTLTexture> temporaryResolveTexture, |
| uint32_t width, |
| uint32_t height) { |
| [commandContext->EnsureBlit() copyFromTexture:temporaryResolveTexture |
| sourceSlice:0 |
| sourceLevel:0 |
| sourceOrigin:MTLOriginMake(0, 0, 0) |
| sourceSize:MTLSizeMake(width, height, 1) |
| toTexture:mtlTrueResolveTexture |
| destinationSlice:trueResolveSlice |
| destinationLevel:trueResolveLevel |
| destinationOrigin:MTLOriginMake(0, 0, 0)]; |
| } |
| |
| // Metal uses a physical addressing mode which means buffers in the shading language are |
| // just pointers to the virtual address of their start. This means there is no way to know |
| // the length of a buffer to compute the length() of unsized arrays at the end of storage |
| // buffers. SPIRV-Cross implements the length() of unsized arrays by requiring an extra |
| // buffer that contains the length of other buffers. This structure that keeps track of the |
| // length of storage buffers and can apply them to the reserved "buffer length buffer" when |
| // needed for a draw or a dispatch. |
| struct StorageBufferLengthTracker { |
| wgpu::ShaderStage dirtyStages = wgpu::ShaderStage::None; |
| |
| // The lengths of buffers are stored as 32bit integers because that is the width the |
| // MSL code generated by SPIRV-Cross expects. |
| PerStage<std::array<uint32_t, kGenericMetalBufferSlots>> data; |
| |
| void Apply(id<MTLRenderCommandEncoder> render, |
| RenderPipeline* pipeline, |
| bool enableVertexPulling) { |
| wgpu::ShaderStage stagesToApply = |
| dirtyStages & pipeline->GetStagesRequiringStorageBufferLength(); |
| |
| if (stagesToApply == wgpu::ShaderStage::None) { |
| return; |
| } |
| |
| if (stagesToApply & wgpu::ShaderStage::Vertex) { |
| uint32_t bufferCount = ToBackend(pipeline->GetLayout()) |
| ->GetBufferBindingCount(SingleShaderStage::Vertex); |
| |
| if (enableVertexPulling) { |
| bufferCount += pipeline->GetVertexBufferCount(); |
| } |
| |
| [render setVertexBytes:data[SingleShaderStage::Vertex].data() |
| length:sizeof(uint32_t) * bufferCount |
| atIndex:kBufferLengthBufferSlot]; |
| } |
| |
| if (stagesToApply & wgpu::ShaderStage::Fragment) { |
| uint32_t bufferCount = ToBackend(pipeline->GetLayout()) |
| ->GetBufferBindingCount(SingleShaderStage::Fragment); |
| [render setFragmentBytes:data[SingleShaderStage::Fragment].data() |
| length:sizeof(uint32_t) * bufferCount |
| atIndex:kBufferLengthBufferSlot]; |
| } |
| |
| // Only mark clean stages that were actually applied. |
| dirtyStages ^= stagesToApply; |
| } |
| |
| void Apply(id<MTLComputeCommandEncoder> compute, ComputePipeline* pipeline) { |
| if (!(dirtyStages & wgpu::ShaderStage::Compute)) { |
| return; |
| } |
| |
| if (!pipeline->RequiresStorageBufferLength()) { |
| return; |
| } |
| |
| uint32_t bufferCount = ToBackend(pipeline->GetLayout()) |
| ->GetBufferBindingCount(SingleShaderStage::Compute); |
| [compute setBytes:data[SingleShaderStage::Compute].data() |
| length:sizeof(uint32_t) * bufferCount |
| atIndex:kBufferLengthBufferSlot]; |
| |
| dirtyStages ^= wgpu::ShaderStage::Compute; |
| } |
| }; |
| |
| // Keeps track of the dirty bind groups so they can be lazily applied when we know the |
| // pipeline state. |
| // Bind groups may be inherited because bind groups are packed in the buffer / |
| // texture tables in contiguous order. |
| class BindGroupTracker : public BindGroupTrackerBase<true, uint64_t> { |
| public: |
| explicit BindGroupTracker(StorageBufferLengthTracker* lengthTracker) |
| : BindGroupTrackerBase(), mLengthTracker(lengthTracker) { |
| } |
| |
| template <typename Encoder> |
| void Apply(Encoder encoder) { |
| for (BindGroupIndex index : |
| IterateBitSet(mDirtyBindGroupsObjectChangedOrIsDynamic)) { |
| ApplyBindGroup(encoder, index, ToBackend(mBindGroups[index]), |
| mDynamicOffsetCounts[index], mDynamicOffsets[index].data(), |
| ToBackend(mPipelineLayout)); |
| } |
| DidApply(); |
| } |
| |
| private: |
| // Handles a call to SetBindGroup, directing the commands to the correct encoder. |
| // There is a single function that takes both encoders to factor code. Other approaches |
| // like templates wouldn't work because the name of methods are different between the |
| // two encoder types. |
| void ApplyBindGroupImpl(id<MTLRenderCommandEncoder> render, |
| id<MTLComputeCommandEncoder> compute, |
| BindGroupIndex index, |
| BindGroup* group, |
| uint32_t dynamicOffsetCount, |
| uint64_t* dynamicOffsets, |
| PipelineLayout* pipelineLayout) { |
| uint32_t currentDynamicBufferIndex = 0; |
| |
| // TODO(crbug.com/dawn/854): Maintain buffers and offsets arrays in BindGroup |
| // so that we only have to do one setVertexBuffers and one setFragmentBuffers |
| // call here. |
| for (BindingIndex bindingIndex{0}; |
| bindingIndex < group->GetLayout()->GetBindingCount(); ++bindingIndex) { |
| const BindingInfo& bindingInfo = |
| group->GetLayout()->GetBindingInfo(bindingIndex); |
| |
| bool hasVertStage = |
| bindingInfo.visibility & wgpu::ShaderStage::Vertex && render != nullptr; |
| bool hasFragStage = |
| bindingInfo.visibility & wgpu::ShaderStage::Fragment && render != nullptr; |
| bool hasComputeStage = |
| bindingInfo.visibility & wgpu::ShaderStage::Compute && compute != nullptr; |
| |
| uint32_t vertIndex = 0; |
| uint32_t fragIndex = 0; |
| uint32_t computeIndex = 0; |
| |
| if (hasVertStage) { |
| vertIndex = pipelineLayout->GetBindingIndexInfo( |
| SingleShaderStage::Vertex)[index][bindingIndex]; |
| } |
| if (hasFragStage) { |
| fragIndex = pipelineLayout->GetBindingIndexInfo( |
| SingleShaderStage::Fragment)[index][bindingIndex]; |
| } |
| if (hasComputeStage) { |
| computeIndex = pipelineLayout->GetBindingIndexInfo( |
| SingleShaderStage::Compute)[index][bindingIndex]; |
| } |
| |
| switch (bindingInfo.bindingType) { |
| case BindingInfoType::Buffer: { |
| const BufferBinding& binding = |
| group->GetBindingAsBufferBinding(bindingIndex); |
| const id<MTLBuffer> buffer = ToBackend(binding.buffer)->GetMTLBuffer(); |
| NSUInteger offset = binding.offset; |
| |
| // TODO(crbug.com/dawn/854): Record bound buffer status to use |
| // setBufferOffset to achieve better performance. |
| if (bindingInfo.buffer.hasDynamicOffset) { |
| offset += dynamicOffsets[currentDynamicBufferIndex]; |
| currentDynamicBufferIndex++; |
| } |
| |
| if (hasVertStage) { |
| mLengthTracker->data[SingleShaderStage::Vertex][vertIndex] = |
| binding.size; |
| mLengthTracker->dirtyStages |= wgpu::ShaderStage::Vertex; |
| [render setVertexBuffers:&buffer |
| offsets:&offset |
| withRange:NSMakeRange(vertIndex, 1)]; |
| } |
| if (hasFragStage) { |
| mLengthTracker->data[SingleShaderStage::Fragment][fragIndex] = |
| binding.size; |
| mLengthTracker->dirtyStages |= wgpu::ShaderStage::Fragment; |
| [render setFragmentBuffers:&buffer |
| offsets:&offset |
| withRange:NSMakeRange(fragIndex, 1)]; |
| } |
| if (hasComputeStage) { |
| mLengthTracker->data[SingleShaderStage::Compute][computeIndex] = |
| binding.size; |
| mLengthTracker->dirtyStages |= wgpu::ShaderStage::Compute; |
| [compute setBuffers:&buffer |
| offsets:&offset |
| withRange:NSMakeRange(computeIndex, 1)]; |
| } |
| |
| break; |
| } |
| |
| case BindingInfoType::Sampler: { |
| auto sampler = ToBackend(group->GetBindingAsSampler(bindingIndex)); |
| if (hasVertStage) { |
| [render setVertexSamplerState:sampler->GetMTLSamplerState() |
| atIndex:vertIndex]; |
| } |
| if (hasFragStage) { |
| [render setFragmentSamplerState:sampler->GetMTLSamplerState() |
| atIndex:fragIndex]; |
| } |
| if (hasComputeStage) { |
| [compute setSamplerState:sampler->GetMTLSamplerState() |
| atIndex:computeIndex]; |
| } |
| break; |
| } |
| |
| case BindingInfoType::Texture: |
| case BindingInfoType::StorageTexture: { |
| auto textureView = |
| ToBackend(group->GetBindingAsTextureView(bindingIndex)); |
| if (hasVertStage) { |
| [render setVertexTexture:textureView->GetMTLTexture() |
| atIndex:vertIndex]; |
| } |
| if (hasFragStage) { |
| [render setFragmentTexture:textureView->GetMTLTexture() |
| atIndex:fragIndex]; |
| } |
| if (hasComputeStage) { |
| [compute setTexture:textureView->GetMTLTexture() |
| atIndex:computeIndex]; |
| } |
| break; |
| } |
| |
| case BindingInfoType::ExternalTexture: { |
| const std::array<Ref<TextureViewBase>, kMaxPlanesPerFormat>& views = |
| group->GetBindingAsExternalTexture(bindingIndex)->GetTextureViews(); |
| |
| // Only single-plane formats are supported right now, so assert only one |
| // view exists. |
| ASSERT(views[1].Get() == nullptr); |
| ASSERT(views[2].Get() == nullptr); |
| |
| TextureView* textureView = ToBackend(views[0].Get()); |
| |
| if (hasVertStage) { |
| [render setVertexTexture:textureView->GetMTLTexture() |
| atIndex:vertIndex]; |
| } |
| if (hasFragStage) { |
| [render setFragmentTexture:textureView->GetMTLTexture() |
| atIndex:fragIndex]; |
| } |
| if (hasComputeStage) { |
| [compute setTexture:textureView->GetMTLTexture() |
| atIndex:computeIndex]; |
| } |
| break; |
| } |
| } |
| } |
| } |
| |
| template <typename... Args> |
| void ApplyBindGroup(id<MTLRenderCommandEncoder> encoder, Args&&... args) { |
| ApplyBindGroupImpl(encoder, nullptr, std::forward<Args&&>(args)...); |
| } |
| |
| template <typename... Args> |
| void ApplyBindGroup(id<MTLComputeCommandEncoder> encoder, Args&&... args) { |
| ApplyBindGroupImpl(nullptr, encoder, std::forward<Args&&>(args)...); |
| } |
| |
| StorageBufferLengthTracker* mLengthTracker; |
| }; |
| |
| // Keeps track of the dirty vertex buffer values so they can be lazily applied when we know |
| // all the relevant state. |
| class VertexBufferTracker { |
| public: |
| explicit VertexBufferTracker(StorageBufferLengthTracker* lengthTracker) |
| : mLengthTracker(lengthTracker) { |
| } |
| |
| void OnSetVertexBuffer(VertexBufferSlot slot, Buffer* buffer, uint64_t offset) { |
| mVertexBuffers[slot] = buffer->GetMTLBuffer(); |
| mVertexBufferOffsets[slot] = offset; |
| |
| ASSERT(buffer->GetSize() < std::numeric_limits<uint32_t>::max()); |
| mVertexBufferBindingSizes[slot] = static_cast<uint32_t>(buffer->GetSize() - offset); |
| mDirtyVertexBuffers.set(slot); |
| } |
| |
| void OnSetPipeline(RenderPipeline* lastPipeline, RenderPipeline* pipeline) { |
| // When a new pipeline is bound we must set all the vertex buffers again because |
| // they might have been offset by the pipeline layout, and they might be packed |
| // differently from the previous pipeline. |
| mDirtyVertexBuffers |= pipeline->GetVertexBufferSlotsUsed(); |
| } |
| |
| void Apply(id<MTLRenderCommandEncoder> encoder, |
| RenderPipeline* pipeline, |
| bool enableVertexPulling) { |
| const auto& vertexBuffersToApply = |
| mDirtyVertexBuffers & pipeline->GetVertexBufferSlotsUsed(); |
| |
| for (VertexBufferSlot slot : IterateBitSet(vertexBuffersToApply)) { |
| uint32_t metalIndex = pipeline->GetMtlVertexBufferIndex(slot); |
| |
| if (enableVertexPulling) { |
| // Insert lengths for vertex buffers bound as storage buffers |
| mLengthTracker->data[SingleShaderStage::Vertex][metalIndex] = |
| mVertexBufferBindingSizes[slot]; |
| mLengthTracker->dirtyStages |= wgpu::ShaderStage::Vertex; |
| } |
| |
| [encoder setVertexBuffers:&mVertexBuffers[slot] |
| offsets:&mVertexBufferOffsets[slot] |
| withRange:NSMakeRange(metalIndex, 1)]; |
| } |
| |
| mDirtyVertexBuffers.reset(); |
| } |
| |
| private: |
| // All the indices in these arrays are Dawn vertex buffer indices |
| ityp::bitset<VertexBufferSlot, kMaxVertexBuffers> mDirtyVertexBuffers; |
| ityp::array<VertexBufferSlot, id<MTLBuffer>, kMaxVertexBuffers> mVertexBuffers; |
| ityp::array<VertexBufferSlot, NSUInteger, kMaxVertexBuffers> mVertexBufferOffsets; |
| ityp::array<VertexBufferSlot, uint32_t, kMaxVertexBuffers> mVertexBufferBindingSizes; |
| |
| StorageBufferLengthTracker* mLengthTracker; |
| }; |
| |
| } // anonymous namespace |
| |
| void RecordCopyBufferToTexture(CommandRecordingContext* commandContext, |
| id<MTLBuffer> mtlBuffer, |
| uint64_t bufferSize, |
| uint64_t offset, |
| uint32_t bytesPerRow, |
| uint32_t rowsPerImage, |
| Texture* texture, |
| uint32_t mipLevel, |
| const Origin3D& origin, |
| Aspect aspect, |
| const Extent3D& copySize) { |
| TextureBufferCopySplit splitCopies = |
| ComputeTextureBufferCopySplit(texture, mipLevel, origin, copySize, bufferSize, offset, |
| bytesPerRow, rowsPerImage, aspect); |
| |
| MTLBlitOption blitOption = ComputeMTLBlitOption(texture->GetFormat(), aspect); |
| |
| for (const auto& copyInfo : splitCopies) { |
| uint64_t bufferOffset = copyInfo.bufferOffset; |
| switch (texture->GetDimension()) { |
| case wgpu::TextureDimension::e2D: { |
| const MTLOrigin textureOrigin = |
| MTLOriginMake(copyInfo.textureOrigin.x, copyInfo.textureOrigin.y, 0); |
| const MTLSize copyExtent = |
| MTLSizeMake(copyInfo.copyExtent.width, copyInfo.copyExtent.height, 1); |
| |
| for (uint32_t z = copyInfo.textureOrigin.z; |
| z < copyInfo.textureOrigin.z + copyInfo.copyExtent.depthOrArrayLayers; |
| ++z) { |
| [commandContext->EnsureBlit() copyFromBuffer:mtlBuffer |
| sourceOffset:bufferOffset |
| sourceBytesPerRow:copyInfo.bytesPerRow |
| sourceBytesPerImage:copyInfo.bytesPerImage |
| sourceSize:copyExtent |
| toTexture:texture->GetMTLTexture() |
| destinationSlice:z |
| destinationLevel:mipLevel |
| destinationOrigin:textureOrigin |
| options:blitOption]; |
| bufferOffset += copyInfo.bytesPerImage; |
| } |
| break; |
| } |
| case wgpu::TextureDimension::e3D: { |
| [commandContext->EnsureBlit() |
| copyFromBuffer:mtlBuffer |
| sourceOffset:bufferOffset |
| sourceBytesPerRow:copyInfo.bytesPerRow |
| sourceBytesPerImage:copyInfo.bytesPerImage |
| sourceSize:MTLSizeMake(copyInfo.copyExtent.width, |
| copyInfo.copyExtent.height, |
| copyInfo.copyExtent.depthOrArrayLayers) |
| toTexture:texture->GetMTLTexture() |
| destinationSlice:0 |
| destinationLevel:mipLevel |
| destinationOrigin:MTLOriginMake(copyInfo.textureOrigin.x, |
| copyInfo.textureOrigin.y, |
| copyInfo.textureOrigin.z) |
| options:blitOption]; |
| break; |
| } |
| case wgpu::TextureDimension::e1D: |
| UNREACHABLE(); |
| } |
| } |
| } |
| |
| // static |
| Ref<CommandBuffer> CommandBuffer::Create(CommandEncoder* encoder, |
| const CommandBufferDescriptor* descriptor) { |
| return AcquireRef(new CommandBuffer(encoder, descriptor)); |
| } |
| |
| MaybeError CommandBuffer::FillCommands(CommandRecordingContext* commandContext) { |
| size_t nextComputePassNumber = 0; |
| size_t nextRenderPassNumber = 0; |
| |
| auto LazyClearSyncScope = [](const SyncScopeResourceUsage& scope, |
| CommandRecordingContext* commandContext) { |
| for (size_t i = 0; i < scope.textures.size(); ++i) { |
| Texture* texture = ToBackend(scope.textures[i]); |
| |
| // Clear subresources that are not render attachments. Render attachments will be |
| // cleared in RecordBeginRenderPass by setting the loadop to clear when the texture |
| // subresource has not been initialized before the render pass. |
| scope.textureUsages[i].Iterate( |
| [&](const SubresourceRange& range, wgpu::TextureUsage usage) { |
| if (usage & ~wgpu::TextureUsage::RenderAttachment) { |
| texture->EnsureSubresourceContentInitialized(commandContext, range); |
| } |
| }); |
| } |
| for (BufferBase* bufferBase : scope.buffers) { |
| ToBackend(bufferBase)->EnsureDataInitialized(commandContext); |
| } |
| }; |
| |
| Command type; |
| while (mCommands.NextCommandId(&type)) { |
| switch (type) { |
| case Command::BeginComputePass: { |
| mCommands.NextCommand<BeginComputePassCmd>(); |
| |
| for (const SyncScopeResourceUsage& scope : |
| GetResourceUsages().computePasses[nextComputePassNumber].dispatchUsages) { |
| LazyClearSyncScope(scope, commandContext); |
| } |
| commandContext->EndBlit(); |
| |
| DAWN_TRY(EncodeComputePass(commandContext)); |
| |
| nextComputePassNumber++; |
| break; |
| } |
| |
| case Command::BeginRenderPass: { |
| BeginRenderPassCmd* cmd = mCommands.NextCommand<BeginRenderPassCmd>(); |
| |
| LazyClearSyncScope(GetResourceUsages().renderPasses[nextRenderPassNumber], |
| commandContext); |
| commandContext->EndBlit(); |
| |
| LazyClearRenderPassAttachments(cmd); |
| NSRef<MTLRenderPassDescriptor> descriptor = CreateMTLRenderPassDescriptor(cmd); |
| DAWN_TRY(EncodeRenderPass(commandContext, descriptor.Get(), cmd->width, |
| cmd->height)); |
| |
| nextRenderPassNumber++; |
| break; |
| } |
| |
| case Command::CopyBufferToBuffer: { |
| CopyBufferToBufferCmd* copy = mCommands.NextCommand<CopyBufferToBufferCmd>(); |
| if (copy->size == 0) { |
| // Skip no-op copies. |
| break; |
| } |
| |
| ToBackend(copy->source)->EnsureDataInitialized(commandContext); |
| ToBackend(copy->destination) |
| ->EnsureDataInitializedAsDestination(commandContext, |
| copy->destinationOffset, copy->size); |
| |
| [commandContext->EnsureBlit() |
| copyFromBuffer:ToBackend(copy->source)->GetMTLBuffer() |
| sourceOffset:copy->sourceOffset |
| toBuffer:ToBackend(copy->destination)->GetMTLBuffer() |
| destinationOffset:copy->destinationOffset |
| size:copy->size]; |
| break; |
| } |
| |
| case Command::CopyBufferToTexture: { |
| CopyBufferToTextureCmd* copy = mCommands.NextCommand<CopyBufferToTextureCmd>(); |
| if (copy->copySize.width == 0 || copy->copySize.height == 0 || |
| copy->copySize.depthOrArrayLayers == 0) { |
| // Skip no-op copies. |
| continue; |
| } |
| auto& src = copy->source; |
| auto& dst = copy->destination; |
| auto& copySize = copy->copySize; |
| Buffer* buffer = ToBackend(src.buffer.Get()); |
| Texture* texture = ToBackend(dst.texture.Get()); |
| |
| buffer->EnsureDataInitialized(commandContext); |
| EnsureDestinationTextureInitialized(commandContext, texture, dst, copySize); |
| |
| RecordCopyBufferToTexture(commandContext, buffer->GetMTLBuffer(), |
| buffer->GetSize(), src.offset, src.bytesPerRow, |
| src.rowsPerImage, texture, dst.mipLevel, dst.origin, |
| dst.aspect, copySize); |
| break; |
| } |
| |
| case Command::CopyTextureToBuffer: { |
| CopyTextureToBufferCmd* copy = mCommands.NextCommand<CopyTextureToBufferCmd>(); |
| if (copy->copySize.width == 0 || copy->copySize.height == 0 || |
| copy->copySize.depthOrArrayLayers == 0) { |
| // Skip no-op copies. |
| continue; |
| } |
| auto& src = copy->source; |
| auto& dst = copy->destination; |
| auto& copySize = copy->copySize; |
| Texture* texture = ToBackend(src.texture.Get()); |
| Buffer* buffer = ToBackend(dst.buffer.Get()); |
| |
| buffer->EnsureDataInitializedAsDestination(commandContext, copy); |
| |
| texture->EnsureSubresourceContentInitialized( |
| commandContext, GetSubresourcesAffectedByCopy(src, copySize)); |
| |
| TextureBufferCopySplit splitCopies = ComputeTextureBufferCopySplit( |
| texture, src.mipLevel, src.origin, copySize, buffer->GetSize(), dst.offset, |
| dst.bytesPerRow, dst.rowsPerImage, src.aspect); |
| |
| for (const auto& copyInfo : splitCopies) { |
| MTLBlitOption blitOption = |
| ComputeMTLBlitOption(texture->GetFormat(), src.aspect); |
| uint64_t bufferOffset = copyInfo.bufferOffset; |
| |
| switch (texture->GetDimension()) { |
| case wgpu::TextureDimension::e2D: { |
| const MTLOrigin textureOrigin = MTLOriginMake( |
| copyInfo.textureOrigin.x, copyInfo.textureOrigin.y, 0); |
| const MTLSize copyExtent = MTLSizeMake( |
| copyInfo.copyExtent.width, copyInfo.copyExtent.height, 1); |
| |
| for (uint32_t z = copyInfo.textureOrigin.z; |
| z < copyInfo.textureOrigin.z + |
| copyInfo.copyExtent.depthOrArrayLayers; |
| ++z) { |
| [commandContext->EnsureBlit() |
| copyFromTexture:texture->GetMTLTexture() |
| sourceSlice:z |
| sourceLevel:src.mipLevel |
| sourceOrigin:textureOrigin |
| sourceSize:copyExtent |
| toBuffer:buffer->GetMTLBuffer() |
| destinationOffset:bufferOffset |
| destinationBytesPerRow:copyInfo.bytesPerRow |
| destinationBytesPerImage:copyInfo.bytesPerImage |
| options:blitOption]; |
| bufferOffset += copyInfo.bytesPerImage; |
| } |
| break; |
| } |
| case wgpu::TextureDimension::e3D: { |
| [commandContext->EnsureBlit() |
| copyFromTexture:texture->GetMTLTexture() |
| sourceSlice:0 |
| sourceLevel:src.mipLevel |
| sourceOrigin:MTLOriginMake(copyInfo.textureOrigin.x, |
| copyInfo.textureOrigin.y, |
| copyInfo.textureOrigin.z) |
| sourceSize:MTLSizeMake(copyInfo.copyExtent.width, |
| copyInfo.copyExtent.height, |
| copyInfo.copyExtent |
| .depthOrArrayLayers) |
| toBuffer:buffer->GetMTLBuffer() |
| destinationOffset:bufferOffset |
| destinationBytesPerRow:copyInfo.bytesPerRow |
| destinationBytesPerImage:copyInfo.bytesPerImage |
| options:blitOption]; |
| break; |
| } |
| case wgpu::TextureDimension::e1D: |
| UNREACHABLE(); |
| } |
| } |
| break; |
| } |
| |
| case Command::CopyTextureToTexture: { |
| CopyTextureToTextureCmd* copy = |
| mCommands.NextCommand<CopyTextureToTextureCmd>(); |
| if (copy->copySize.width == 0 || copy->copySize.height == 0 || |
| copy->copySize.depthOrArrayLayers == 0) { |
| // Skip no-op copies. |
| continue; |
| } |
| Texture* srcTexture = ToBackend(copy->source.texture.Get()); |
| Texture* dstTexture = ToBackend(copy->destination.texture.Get()); |
| |
| srcTexture->EnsureSubresourceContentInitialized( |
| commandContext, |
| GetSubresourcesAffectedByCopy(copy->source, copy->copySize)); |
| EnsureDestinationTextureInitialized(commandContext, dstTexture, |
| copy->destination, copy->copySize); |
| |
| // TODO(crbug.com/dawn/814): support copies with 1D textures. |
| ASSERT(srcTexture->GetDimension() != wgpu::TextureDimension::e1D && |
| dstTexture->GetDimension() != wgpu::TextureDimension::e1D); |
| |
| const MTLSize sizeOneSlice = |
| MTLSizeMake(copy->copySize.width, copy->copySize.height, 1); |
| |
| uint32_t sourceLayer = 0; |
| uint32_t sourceOriginZ = 0; |
| |
| uint32_t destinationLayer = 0; |
| uint32_t destinationOriginZ = 0; |
| |
| uint32_t* sourceZPtr; |
| if (srcTexture->GetDimension() == wgpu::TextureDimension::e2D) { |
| sourceZPtr = &sourceLayer; |
| } else { |
| sourceZPtr = &sourceOriginZ; |
| } |
| |
| uint32_t* destinationZPtr; |
| if (dstTexture->GetDimension() == wgpu::TextureDimension::e2D) { |
| destinationZPtr = &destinationLayer; |
| } else { |
| destinationZPtr = &destinationOriginZ; |
| } |
| |
| // TODO(crbug.com/dawn/782): Do a single T2T copy if both are 3D. |
| for (uint32_t z = 0; z < copy->copySize.depthOrArrayLayers; ++z) { |
| *sourceZPtr = copy->source.origin.z + z; |
| *destinationZPtr = copy->destination.origin.z + z; |
| |
| [commandContext->EnsureBlit() |
| copyFromTexture:srcTexture->GetMTLTexture() |
| sourceSlice:sourceLayer |
| sourceLevel:copy->source.mipLevel |
| sourceOrigin:MTLOriginMake(copy->source.origin.x, |
| copy->source.origin.y, sourceOriginZ) |
| sourceSize:sizeOneSlice |
| toTexture:dstTexture->GetMTLTexture() |
| destinationSlice:destinationLayer |
| destinationLevel:copy->destination.mipLevel |
| destinationOrigin:MTLOriginMake(copy->destination.origin.x, |
| copy->destination.origin.y, |
| destinationOriginZ)]; |
| } |
| break; |
| } |
| |
| case Command::ResolveQuerySet: { |
| ResolveQuerySetCmd* cmd = mCommands.NextCommand<ResolveQuerySetCmd>(); |
| QuerySet* querySet = ToBackend(cmd->querySet.Get()); |
| Buffer* destination = ToBackend(cmd->destination.Get()); |
| |
| destination->EnsureDataInitializedAsDestination( |
| commandContext, cmd->destinationOffset, cmd->queryCount * sizeof(uint64_t)); |
| |
| if (querySet->GetQueryType() == wgpu::QueryType::Occlusion) { |
| [commandContext->EnsureBlit() |
| copyFromBuffer:querySet->GetVisibilityBuffer() |
| sourceOffset:NSUInteger(cmd->firstQuery * sizeof(uint64_t)) |
| toBuffer:destination->GetMTLBuffer() |
| destinationOffset:NSUInteger(cmd->destinationOffset) |
| size:NSUInteger(cmd->queryCount * sizeof(uint64_t))]; |
| } else { |
| if (@available(macos 10.15, iOS 14.0, *)) { |
| [commandContext->EnsureBlit() |
| resolveCounters:querySet->GetCounterSampleBuffer() |
| inRange:NSMakeRange(cmd->firstQuery, |
| cmd->firstQuery + cmd->queryCount) |
| destinationBuffer:destination->GetMTLBuffer() |
| destinationOffset:NSUInteger(cmd->destinationOffset)]; |
| } else { |
| UNREACHABLE(); |
| } |
| } |
| break; |
| } |
| |
| case Command::WriteTimestamp: { |
| WriteTimestampCmd* cmd = mCommands.NextCommand<WriteTimestampCmd>(); |
| QuerySet* querySet = ToBackend(cmd->querySet.Get()); |
| |
| if (@available(macos 10.15, iOS 14.0, *)) { |
| [commandContext->EnsureBlit() |
| sampleCountersInBuffer:querySet->GetCounterSampleBuffer() |
| atSampleIndex:NSUInteger(cmd->queryIndex) |
| withBarrier:YES]; |
| } else { |
| UNREACHABLE(); |
| } |
| break; |
| } |
| |
| case Command::InsertDebugMarker: { |
| // MTLCommandBuffer does not implement insertDebugSignpost |
| SkipCommand(&mCommands, type); |
| break; |
| } |
| |
| case Command::PopDebugGroup: { |
| mCommands.NextCommand<PopDebugGroupCmd>(); |
| |
| if (@available(macos 10.13, *)) { |
| [commandContext->GetCommands() popDebugGroup]; |
| } |
| break; |
| } |
| |
| case Command::PushDebugGroup: { |
| PushDebugGroupCmd* cmd = mCommands.NextCommand<PushDebugGroupCmd>(); |
| char* label = mCommands.NextData<char>(cmd->length + 1); |
| |
| if (@available(macos 10.13, *)) { |
| NSRef<NSString> mtlLabel = |
| AcquireNSRef([[NSString alloc] initWithUTF8String:label]); |
| [commandContext->GetCommands() pushDebugGroup:mtlLabel.Get()]; |
| } |
| |
| break; |
| } |
| |
| default: |
| UNREACHABLE(); |
| } |
| } |
| |
| commandContext->EndBlit(); |
| return {}; |
| } |
| |
| MaybeError CommandBuffer::EncodeComputePass(CommandRecordingContext* commandContext) { |
| ComputePipeline* lastPipeline = nullptr; |
| StorageBufferLengthTracker storageBufferLengths = {}; |
| BindGroupTracker bindGroups(&storageBufferLengths); |
| |
| id<MTLComputeCommandEncoder> encoder = commandContext->BeginCompute(); |
| |
| Command type; |
| while (mCommands.NextCommandId(&type)) { |
| switch (type) { |
| case Command::EndComputePass: { |
| mCommands.NextCommand<EndComputePassCmd>(); |
| commandContext->EndCompute(); |
| return {}; |
| } |
| |
| case Command::Dispatch: { |
| DispatchCmd* dispatch = mCommands.NextCommand<DispatchCmd>(); |
| |
| // Skip noop dispatches, it can causes issues on some systems. |
| if (dispatch->x == 0 || dispatch->y == 0 || dispatch->z == 0) { |
| break; |
| } |
| |
| bindGroups.Apply(encoder); |
| storageBufferLengths.Apply(encoder, lastPipeline); |
| |
| [encoder dispatchThreadgroups:MTLSizeMake(dispatch->x, dispatch->y, dispatch->z) |
| threadsPerThreadgroup:lastPipeline->GetLocalWorkGroupSize()]; |
| break; |
| } |
| |
| case Command::DispatchIndirect: { |
| DispatchIndirectCmd* dispatch = mCommands.NextCommand<DispatchIndirectCmd>(); |
| |
| bindGroups.Apply(encoder); |
| storageBufferLengths.Apply(encoder, lastPipeline); |
| |
| Buffer* buffer = ToBackend(dispatch->indirectBuffer.Get()); |
| id<MTLBuffer> indirectBuffer = buffer->GetMTLBuffer(); |
| [encoder dispatchThreadgroupsWithIndirectBuffer:indirectBuffer |
| indirectBufferOffset:dispatch->indirectOffset |
| threadsPerThreadgroup:lastPipeline |
| ->GetLocalWorkGroupSize()]; |
| break; |
| } |
| |
| case Command::SetComputePipeline: { |
| SetComputePipelineCmd* cmd = mCommands.NextCommand<SetComputePipelineCmd>(); |
| lastPipeline = ToBackend(cmd->pipeline).Get(); |
| |
| bindGroups.OnSetPipeline(lastPipeline); |
| |
| lastPipeline->Encode(encoder); |
| break; |
| } |
| |
| case Command::SetBindGroup: { |
| SetBindGroupCmd* cmd = mCommands.NextCommand<SetBindGroupCmd>(); |
| uint32_t* dynamicOffsets = nullptr; |
| if (cmd->dynamicOffsetCount > 0) { |
| dynamicOffsets = mCommands.NextData<uint32_t>(cmd->dynamicOffsetCount); |
| } |
| |
| bindGroups.OnSetBindGroup(cmd->index, ToBackend(cmd->group.Get()), |
| cmd->dynamicOffsetCount, dynamicOffsets); |
| break; |
| } |
| |
| case Command::InsertDebugMarker: { |
| InsertDebugMarkerCmd* cmd = mCommands.NextCommand<InsertDebugMarkerCmd>(); |
| char* label = mCommands.NextData<char>(cmd->length + 1); |
| NSRef<NSString> mtlLabel = |
| AcquireNSRef([[NSString alloc] initWithUTF8String:label]); |
| [encoder insertDebugSignpost:mtlLabel.Get()]; |
| break; |
| } |
| |
| case Command::PopDebugGroup: { |
| mCommands.NextCommand<PopDebugGroupCmd>(); |
| |
| [encoder popDebugGroup]; |
| break; |
| } |
| |
| case Command::PushDebugGroup: { |
| PushDebugGroupCmd* cmd = mCommands.NextCommand<PushDebugGroupCmd>(); |
| char* label = mCommands.NextData<char>(cmd->length + 1); |
| NSRef<NSString> mtlLabel = |
| AcquireNSRef([[NSString alloc] initWithUTF8String:label]); |
| [encoder pushDebugGroup:mtlLabel.Get()]; |
| break; |
| } |
| |
| case Command::WriteTimestamp: { |
| WriteTimestampCmd* cmd = mCommands.NextCommand<WriteTimestampCmd>(); |
| QuerySet* querySet = ToBackend(cmd->querySet.Get()); |
| |
| if (@available(macos 10.15, iOS 14.0, *)) { |
| [encoder sampleCountersInBuffer:querySet->GetCounterSampleBuffer() |
| atSampleIndex:NSUInteger(cmd->queryIndex) |
| withBarrier:YES]; |
| } else { |
| UNREACHABLE(); |
| } |
| break; |
| } |
| |
| default: { |
| UNREACHABLE(); |
| break; |
| } |
| } |
| } |
| |
| // EndComputePass should have been called |
| UNREACHABLE(); |
| } |
| |
| MaybeError CommandBuffer::EncodeRenderPass(CommandRecordingContext* commandContext, |
| MTLRenderPassDescriptor* mtlRenderPass, |
| uint32_t width, |
| uint32_t height) { |
| ASSERT(mtlRenderPass); |
| |
| Device* device = ToBackend(GetDevice()); |
| |
| // Handle Toggle AlwaysResolveIntoZeroLevelAndLayer. We must handle this before applying |
| // the store + MSAA resolve workaround, otherwise this toggle will never be handled because |
| // the resolve texture is removed when applying the store + MSAA resolve workaround. |
| if (device->IsToggleEnabled(Toggle::AlwaysResolveIntoZeroLevelAndLayer)) { |
| std::array<id<MTLTexture>, kMaxColorAttachments> trueResolveTextures = {}; |
| std::array<uint32_t, kMaxColorAttachments> trueResolveLevels = {}; |
| std::array<uint32_t, kMaxColorAttachments> trueResolveSlices = {}; |
| |
| // Use temporary resolve texture on the resolve targets with non-zero resolveLevel or |
| // resolveSlice. |
| bool useTemporaryResolveTexture = false; |
| std::array<NSPRef<id<MTLTexture>>, kMaxColorAttachments> temporaryResolveTextures = {}; |
| for (uint32_t i = 0; i < kMaxColorAttachments; ++i) { |
| if (mtlRenderPass.colorAttachments[i].resolveTexture == nullptr) { |
| continue; |
| } |
| |
| if (mtlRenderPass.colorAttachments[i].resolveLevel == 0 && |
| mtlRenderPass.colorAttachments[i].resolveSlice == 0) { |
| continue; |
| } |
| |
| trueResolveTextures[i] = mtlRenderPass.colorAttachments[i].resolveTexture; |
| trueResolveLevels[i] = mtlRenderPass.colorAttachments[i].resolveLevel; |
| trueResolveSlices[i] = mtlRenderPass.colorAttachments[i].resolveSlice; |
| |
| const MTLPixelFormat mtlFormat = trueResolveTextures[i].pixelFormat; |
| temporaryResolveTextures[i] = |
| CreateResolveTextureForWorkaround(device, mtlFormat, width, height); |
| |
| mtlRenderPass.colorAttachments[i].resolveTexture = |
| temporaryResolveTextures[i].Get(); |
| mtlRenderPass.colorAttachments[i].resolveLevel = 0; |
| mtlRenderPass.colorAttachments[i].resolveSlice = 0; |
| useTemporaryResolveTexture = true; |
| } |
| |
| // If we need to use a temporary resolve texture we need to copy the result of MSAA |
| // resolve back to the true resolve targets. |
| if (useTemporaryResolveTexture) { |
| DAWN_TRY(EncodeRenderPass(commandContext, mtlRenderPass, width, height)); |
| for (uint32_t i = 0; i < kMaxColorAttachments; ++i) { |
| if (trueResolveTextures[i] == nullptr) { |
| continue; |
| } |
| |
| ASSERT(temporaryResolveTextures[i] != nullptr); |
| CopyIntoTrueResolveTarget(commandContext, trueResolveTextures[i], |
| trueResolveLevels[i], trueResolveSlices[i], |
| temporaryResolveTextures[i].Get(), width, height); |
| } |
| return {}; |
| } |
| } |
| |
| // Handle Store + MSAA resolve workaround (Toggle EmulateStoreAndMSAAResolve). |
| if (device->IsToggleEnabled(Toggle::EmulateStoreAndMSAAResolve)) { |
| bool hasStoreAndMSAAResolve = false; |
| |
| // Remove any store + MSAA resolve and remember them. |
| std::array<id<MTLTexture>, kMaxColorAttachments> resolveTextures = {}; |
| for (uint32_t i = 0; i < kMaxColorAttachments; ++i) { |
| if (mtlRenderPass.colorAttachments[i].storeAction == |
| kMTLStoreActionStoreAndMultisampleResolve) { |
| hasStoreAndMSAAResolve = true; |
| resolveTextures[i] = mtlRenderPass.colorAttachments[i].resolveTexture; |
| |
| mtlRenderPass.colorAttachments[i].storeAction = MTLStoreActionStore; |
| mtlRenderPass.colorAttachments[i].resolveTexture = nullptr; |
| } |
| } |
| |
| // If we found a store + MSAA resolve we need to resolve in a different render pass. |
| if (hasStoreAndMSAAResolve) { |
| DAWN_TRY(EncodeRenderPass(commandContext, mtlRenderPass, width, height)); |
| ResolveInAnotherRenderPass(commandContext, mtlRenderPass, resolveTextures); |
| return {}; |
| } |
| } |
| |
| DAWN_TRY(EncodeRenderPassInternal(commandContext, mtlRenderPass, width, height)); |
| return {}; |
| } |
| |
| MaybeError CommandBuffer::EncodeRenderPassInternal(CommandRecordingContext* commandContext, |
| MTLRenderPassDescriptor* mtlRenderPass, |
| uint32_t width, |
| uint32_t height) { |
| bool enableVertexPulling = GetDevice()->IsToggleEnabled(Toggle::MetalEnableVertexPulling); |
| RenderPipeline* lastPipeline = nullptr; |
| id<MTLBuffer> indexBuffer = nullptr; |
| uint32_t indexBufferBaseOffset = 0; |
| MTLIndexType indexBufferType; |
| uint64_t indexFormatSize = 0; |
| |
| StorageBufferLengthTracker storageBufferLengths = {}; |
| VertexBufferTracker vertexBuffers(&storageBufferLengths); |
| BindGroupTracker bindGroups(&storageBufferLengths); |
| |
| id<MTLRenderCommandEncoder> encoder = commandContext->BeginRender(mtlRenderPass); |
| |
| auto EncodeRenderBundleCommand = [&](CommandIterator* iter, Command type) { |
| switch (type) { |
| case Command::Draw: { |
| DrawCmd* draw = iter->NextCommand<DrawCmd>(); |
| |
| vertexBuffers.Apply(encoder, lastPipeline, enableVertexPulling); |
| bindGroups.Apply(encoder); |
| storageBufferLengths.Apply(encoder, lastPipeline, enableVertexPulling); |
| |
| // The instance count must be non-zero, otherwise no-op |
| if (draw->instanceCount != 0) { |
| // MTLFeatureSet_iOS_GPUFamily3_v1 does not support baseInstance |
| if (draw->firstInstance == 0) { |
| [encoder drawPrimitives:lastPipeline->GetMTLPrimitiveTopology() |
| vertexStart:draw->firstVertex |
| vertexCount:draw->vertexCount |
| instanceCount:draw->instanceCount]; |
| } else { |
| [encoder drawPrimitives:lastPipeline->GetMTLPrimitiveTopology() |
| vertexStart:draw->firstVertex |
| vertexCount:draw->vertexCount |
| instanceCount:draw->instanceCount |
| baseInstance:draw->firstInstance]; |
| } |
| } |
| break; |
| } |
| |
| case Command::DrawIndexed: { |
| DrawIndexedCmd* draw = iter->NextCommand<DrawIndexedCmd>(); |
| |
| vertexBuffers.Apply(encoder, lastPipeline, enableVertexPulling); |
| bindGroups.Apply(encoder); |
| storageBufferLengths.Apply(encoder, lastPipeline, enableVertexPulling); |
| |
| // The index and instance count must be non-zero, otherwise no-op |
| if (draw->indexCount != 0 && draw->instanceCount != 0) { |
| // MTLFeatureSet_iOS_GPUFamily3_v1 does not support baseInstance and |
| // baseVertex. |
| if (draw->baseVertex == 0 && draw->firstInstance == 0) { |
| [encoder drawIndexedPrimitives:lastPipeline->GetMTLPrimitiveTopology() |
| indexCount:draw->indexCount |
| indexType:indexBufferType |
| indexBuffer:indexBuffer |
| indexBufferOffset:indexBufferBaseOffset + |
| draw->firstIndex * indexFormatSize |
| instanceCount:draw->instanceCount]; |
| } else { |
| [encoder drawIndexedPrimitives:lastPipeline->GetMTLPrimitiveTopology() |
| indexCount:draw->indexCount |
| indexType:indexBufferType |
| indexBuffer:indexBuffer |
| indexBufferOffset:indexBufferBaseOffset + |
| draw->firstIndex * indexFormatSize |
| instanceCount:draw->instanceCount |
| baseVertex:draw->baseVertex |
| baseInstance:draw->firstInstance]; |
| } |
| } |
| break; |
| } |
| |
| case Command::DrawIndirect: { |
| DrawIndirectCmd* draw = iter->NextCommand<DrawIndirectCmd>(); |
| |
| vertexBuffers.Apply(encoder, lastPipeline, enableVertexPulling); |
| bindGroups.Apply(encoder); |
| storageBufferLengths.Apply(encoder, lastPipeline, enableVertexPulling); |
| |
| Buffer* buffer = ToBackend(draw->indirectBuffer.Get()); |
| id<MTLBuffer> indirectBuffer = buffer->GetMTLBuffer(); |
| [encoder drawPrimitives:lastPipeline->GetMTLPrimitiveTopology() |
| indirectBuffer:indirectBuffer |
| indirectBufferOffset:draw->indirectOffset]; |
| break; |
| } |
| |
| case Command::DrawIndexedIndirect: { |
| DrawIndirectCmd* draw = iter->NextCommand<DrawIndirectCmd>(); |
| |
| vertexBuffers.Apply(encoder, lastPipeline, enableVertexPulling); |
| bindGroups.Apply(encoder); |
| storageBufferLengths.Apply(encoder, lastPipeline, enableVertexPulling); |
| |
| Buffer* buffer = ToBackend(draw->indirectBuffer.Get()); |
| id<MTLBuffer> indirectBuffer = buffer->GetMTLBuffer(); |
| [encoder drawIndexedPrimitives:lastPipeline->GetMTLPrimitiveTopology() |
| indexType:indexBufferType |
| indexBuffer:indexBuffer |
| indexBufferOffset:indexBufferBaseOffset |
| indirectBuffer:indirectBuffer |
| indirectBufferOffset:draw->indirectOffset]; |
| break; |
| } |
| |
| case Command::InsertDebugMarker: { |
| InsertDebugMarkerCmd* cmd = iter->NextCommand<InsertDebugMarkerCmd>(); |
| char* label = iter->NextData<char>(cmd->length + 1); |
| NSRef<NSString> mtlLabel = |
| AcquireNSRef([[NSString alloc] initWithUTF8String:label]); |
| [encoder insertDebugSignpost:mtlLabel.Get()]; |
| break; |
| } |
| |
| case Command::PopDebugGroup: { |
| iter->NextCommand<PopDebugGroupCmd>(); |
| |
| [encoder popDebugGroup]; |
| break; |
| } |
| |
| case Command::PushDebugGroup: { |
| PushDebugGroupCmd* cmd = iter->NextCommand<PushDebugGroupCmd>(); |
| char* label = iter->NextData<char>(cmd->length + 1); |
| NSRef<NSString> mtlLabel = |
| AcquireNSRef([[NSString alloc] initWithUTF8String:label]); |
| [encoder pushDebugGroup:mtlLabel.Get()]; |
| break; |
| } |
| |
| case Command::SetRenderPipeline: { |
| SetRenderPipelineCmd* cmd = iter->NextCommand<SetRenderPipelineCmd>(); |
| RenderPipeline* newPipeline = ToBackend(cmd->pipeline).Get(); |
| |
| vertexBuffers.OnSetPipeline(lastPipeline, newPipeline); |
| bindGroups.OnSetPipeline(newPipeline); |
| |
| [encoder setDepthStencilState:newPipeline->GetMTLDepthStencilState()]; |
| [encoder setFrontFacingWinding:newPipeline->GetMTLFrontFace()]; |
| [encoder setCullMode:newPipeline->GetMTLCullMode()]; |
| [encoder setDepthBias:newPipeline->GetDepthBias() |
| slopeScale:newPipeline->GetDepthBiasSlopeScale() |
| clamp:newPipeline->GetDepthBiasClamp()]; |
| if (@available(macOS 10.11, iOS 11.0, *)) { |
| MTLDepthClipMode clipMode = newPipeline->ShouldClampDepth() ? |
| MTLDepthClipModeClamp : MTLDepthClipModeClip; |
| [encoder setDepthClipMode:clipMode]; |
| } |
| newPipeline->Encode(encoder); |
| |
| lastPipeline = newPipeline; |
| break; |
| } |
| |
| case Command::SetBindGroup: { |
| SetBindGroupCmd* cmd = iter->NextCommand<SetBindGroupCmd>(); |
| uint32_t* dynamicOffsets = nullptr; |
| if (cmd->dynamicOffsetCount > 0) { |
| dynamicOffsets = iter->NextData<uint32_t>(cmd->dynamicOffsetCount); |
| } |
| |
| bindGroups.OnSetBindGroup(cmd->index, ToBackend(cmd->group.Get()), |
| cmd->dynamicOffsetCount, dynamicOffsets); |
| break; |
| } |
| |
| case Command::SetIndexBuffer: { |
| SetIndexBufferCmd* cmd = iter->NextCommand<SetIndexBufferCmd>(); |
| auto b = ToBackend(cmd->buffer.Get()); |
| indexBuffer = b->GetMTLBuffer(); |
| indexBufferBaseOffset = cmd->offset; |
| indexBufferType = MTLIndexFormat(cmd->format); |
| indexFormatSize = IndexFormatSize(cmd->format); |
| break; |
| } |
| |
| case Command::SetVertexBuffer: { |
| SetVertexBufferCmd* cmd = iter->NextCommand<SetVertexBufferCmd>(); |
| |
| vertexBuffers.OnSetVertexBuffer(cmd->slot, ToBackend(cmd->buffer.Get()), |
| cmd->offset); |
| break; |
| } |
| |
| default: |
| UNREACHABLE(); |
| break; |
| } |
| }; |
| |
| Command type; |
| while (mCommands.NextCommandId(&type)) { |
| switch (type) { |
| case Command::EndRenderPass: { |
| mCommands.NextCommand<EndRenderPassCmd>(); |
| commandContext->EndRender(); |
| return {}; |
| } |
| |
| case Command::SetStencilReference: { |
| SetStencilReferenceCmd* cmd = mCommands.NextCommand<SetStencilReferenceCmd>(); |
| [encoder setStencilReferenceValue:cmd->reference]; |
| break; |
| } |
| |
| case Command::SetViewport: { |
| SetViewportCmd* cmd = mCommands.NextCommand<SetViewportCmd>(); |
| MTLViewport viewport; |
| viewport.originX = cmd->x; |
| viewport.originY = cmd->y; |
| viewport.width = cmd->width; |
| viewport.height = cmd->height; |
| viewport.znear = cmd->minDepth; |
| viewport.zfar = cmd->maxDepth; |
| |
| [encoder setViewport:viewport]; |
| break; |
| } |
| |
| case Command::SetScissorRect: { |
| SetScissorRectCmd* cmd = mCommands.NextCommand<SetScissorRectCmd>(); |
| MTLScissorRect rect; |
| rect.x = cmd->x; |
| rect.y = cmd->y; |
| rect.width = cmd->width; |
| rect.height = cmd->height; |
| |
| [encoder setScissorRect:rect]; |
| break; |
| } |
| |
| case Command::SetBlendConstant: { |
| SetBlendConstantCmd* cmd = mCommands.NextCommand<SetBlendConstantCmd>(); |
| [encoder setBlendColorRed:cmd->color.r |
| green:cmd->color.g |
| blue:cmd->color.b |
| alpha:cmd->color.a]; |
| break; |
| } |
| |
| case Command::ExecuteBundles: { |
| ExecuteBundlesCmd* cmd = mCommands.NextCommand<ExecuteBundlesCmd>(); |
| auto bundles = mCommands.NextData<Ref<RenderBundleBase>>(cmd->count); |
| |
| for (uint32_t i = 0; i < cmd->count; ++i) { |
| CommandIterator* iter = bundles[i]->GetCommands(); |
| iter->Reset(); |
| while (iter->NextCommandId(&type)) { |
| EncodeRenderBundleCommand(iter, type); |
| } |
| } |
| break; |
| } |
| |
| case Command::BeginOcclusionQuery: { |
| BeginOcclusionQueryCmd* cmd = mCommands.NextCommand<BeginOcclusionQueryCmd>(); |
| |
| [encoder setVisibilityResultMode:MTLVisibilityResultModeBoolean |
| offset:cmd->queryIndex * sizeof(uint64_t)]; |
| break; |
| } |
| |
| case Command::EndOcclusionQuery: { |
| EndOcclusionQueryCmd* cmd = mCommands.NextCommand<EndOcclusionQueryCmd>(); |
| |
| [encoder setVisibilityResultMode:MTLVisibilityResultModeDisabled |
| offset:cmd->queryIndex * sizeof(uint64_t)]; |
| break; |
| } |
| |
| case Command::WriteTimestamp: { |
| WriteTimestampCmd* cmd = mCommands.NextCommand<WriteTimestampCmd>(); |
| QuerySet* querySet = ToBackend(cmd->querySet.Get()); |
| |
| if (@available(macos 10.15, iOS 14.0, *)) { |
| [encoder sampleCountersInBuffer:querySet->GetCounterSampleBuffer() |
| atSampleIndex:NSUInteger(cmd->queryIndex) |
| withBarrier:YES]; |
| } else { |
| UNREACHABLE(); |
| } |
| break; |
| } |
| |
| default: { |
| EncodeRenderBundleCommand(&mCommands, type); |
| break; |
| } |
| } |
| } |
| |
| // EndRenderPass should have been called |
| UNREACHABLE(); |
| } |
| |
| }} // namespace dawn_native::metal |
