| // Copyright 2017 The Dawn Authors |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "dawn_native/d3d12/TextureD3D12.h" |
| |
| #include "common/Constants.h" |
| #include "common/Math.h" |
| #include "dawn_native/DynamicUploader.h" |
| #include "dawn_native/Error.h" |
| #include "dawn_native/d3d12/BufferD3D12.h" |
| #include "dawn_native/d3d12/DescriptorHeapAllocator.h" |
| #include "dawn_native/d3d12/DeviceD3D12.h" |
| #include "dawn_native/d3d12/ResourceAllocator.h" |
| #include "dawn_native/d3d12/StagingBufferD3D12.h" |
| #include "dawn_native/d3d12/TextureCopySplitter.h" |
| #include "dawn_native/d3d12/UtilsD3D12.h" |
| |
| namespace dawn_native { namespace d3d12 { |
| |
| namespace { |
| D3D12_RESOURCE_STATES D3D12TextureUsage(dawn::TextureUsage usage, const Format& format) { |
| D3D12_RESOURCE_STATES resourceState = D3D12_RESOURCE_STATE_COMMON; |
| |
| // Present is an exclusive flag. |
| if (usage & dawn::TextureUsage::Present) { |
| return D3D12_RESOURCE_STATE_PRESENT; |
| } |
| |
| if (usage & dawn::TextureUsage::CopySrc) { |
| resourceState |= D3D12_RESOURCE_STATE_COPY_SOURCE; |
| } |
| if (usage & dawn::TextureUsage::CopyDst) { |
| resourceState |= D3D12_RESOURCE_STATE_COPY_DEST; |
| } |
| if (usage & dawn::TextureUsage::Sampled) { |
| resourceState |= (D3D12_RESOURCE_STATE_PIXEL_SHADER_RESOURCE | |
| D3D12_RESOURCE_STATE_NON_PIXEL_SHADER_RESOURCE); |
| } |
| if (usage & dawn::TextureUsage::Storage) { |
| resourceState |= D3D12_RESOURCE_STATE_UNORDERED_ACCESS; |
| } |
| if (usage & dawn::TextureUsage::OutputAttachment) { |
| if (format.HasDepthOrStencil()) { |
| resourceState |= D3D12_RESOURCE_STATE_DEPTH_WRITE; |
| } else { |
| resourceState |= D3D12_RESOURCE_STATE_RENDER_TARGET; |
| } |
| } |
| |
| return resourceState; |
| } |
| |
| D3D12_RESOURCE_FLAGS D3D12ResourceFlags(dawn::TextureUsage usage, |
| const Format& format, |
| bool isMultisampledTexture) { |
| D3D12_RESOURCE_FLAGS flags = D3D12_RESOURCE_FLAG_NONE; |
| |
| if (usage & dawn::TextureUsage::Storage) { |
| flags |= D3D12_RESOURCE_FLAG_ALLOW_UNORDERED_ACCESS; |
| } |
| |
| // A multisampled resource must have either D3D12_RESOURCE_FLAG_ALLOW_RENDER_TARGET or |
| // D3D12_RESOURCE_FLAG_ALLOW_DEPTH_STENCIL set in D3D12_RESOURCE_DESC::Flags. |
| // https://docs.microsoft.com/en-us/windows/desktop/api/d3d12/ns-d3d12-d3d12_resource_desc |
| // Currently all textures are zero-initialized via the render-target path so always add |
| // the render target flag, except for compressed textures for which the render-target |
| // flag is invalid. |
| // TODO(natlee@microsoft.com, jiawei.shao@intel.com): do not require render target for |
| // lazy clearing. |
| if ((usage & dawn::TextureUsage::OutputAttachment) || isMultisampledTexture || |
| !format.isCompressed) { |
| if (format.HasDepthOrStencil()) { |
| flags |= D3D12_RESOURCE_FLAG_ALLOW_DEPTH_STENCIL; |
| } else { |
| flags |= D3D12_RESOURCE_FLAG_ALLOW_RENDER_TARGET; |
| } |
| } |
| |
| ASSERT(!(flags & D3D12_RESOURCE_FLAG_ALLOW_DEPTH_STENCIL) || |
| flags == D3D12_RESOURCE_FLAG_ALLOW_DEPTH_STENCIL); |
| return flags; |
| } |
| |
| D3D12_RESOURCE_DIMENSION D3D12TextureDimension(dawn::TextureDimension dimension) { |
| switch (dimension) { |
| case dawn::TextureDimension::e2D: |
| return D3D12_RESOURCE_DIMENSION_TEXTURE2D; |
| default: |
| UNREACHABLE(); |
| } |
| } |
| } // namespace |
| |
| DXGI_FORMAT D3D12TextureFormat(dawn::TextureFormat format) { |
| switch (format) { |
| case dawn::TextureFormat::R8Unorm: |
| return DXGI_FORMAT_R8_UNORM; |
| case dawn::TextureFormat::R8Snorm: |
| return DXGI_FORMAT_R8_SNORM; |
| case dawn::TextureFormat::R8Uint: |
| return DXGI_FORMAT_R8_UINT; |
| case dawn::TextureFormat::R8Sint: |
| return DXGI_FORMAT_R8_SINT; |
| |
| case dawn::TextureFormat::R16Uint: |
| return DXGI_FORMAT_R16_UINT; |
| case dawn::TextureFormat::R16Sint: |
| return DXGI_FORMAT_R16_SINT; |
| case dawn::TextureFormat::R16Float: |
| return DXGI_FORMAT_R16_FLOAT; |
| case dawn::TextureFormat::RG8Unorm: |
| return DXGI_FORMAT_R8G8_UNORM; |
| case dawn::TextureFormat::RG8Snorm: |
| return DXGI_FORMAT_R8G8_SNORM; |
| case dawn::TextureFormat::RG8Uint: |
| return DXGI_FORMAT_R8G8_UINT; |
| case dawn::TextureFormat::RG8Sint: |
| return DXGI_FORMAT_R8G8_SINT; |
| |
| case dawn::TextureFormat::R32Uint: |
| return DXGI_FORMAT_R32_UINT; |
| case dawn::TextureFormat::R32Sint: |
| return DXGI_FORMAT_R32_SINT; |
| case dawn::TextureFormat::R32Float: |
| return DXGI_FORMAT_R32_FLOAT; |
| case dawn::TextureFormat::RG16Uint: |
| return DXGI_FORMAT_R16G16_UINT; |
| case dawn::TextureFormat::RG16Sint: |
| return DXGI_FORMAT_R16G16_SINT; |
| case dawn::TextureFormat::RG16Float: |
| return DXGI_FORMAT_R16G16_FLOAT; |
| case dawn::TextureFormat::RGBA8Unorm: |
| return DXGI_FORMAT_R8G8B8A8_UNORM; |
| case dawn::TextureFormat::RGBA8UnormSrgb: |
| return DXGI_FORMAT_R8G8B8A8_UNORM_SRGB; |
| case dawn::TextureFormat::RGBA8Snorm: |
| return DXGI_FORMAT_R8G8B8A8_SNORM; |
| case dawn::TextureFormat::RGBA8Uint: |
| return DXGI_FORMAT_R8G8B8A8_UINT; |
| case dawn::TextureFormat::RGBA8Sint: |
| return DXGI_FORMAT_R8G8B8A8_SINT; |
| case dawn::TextureFormat::BGRA8Unorm: |
| return DXGI_FORMAT_B8G8R8A8_UNORM; |
| case dawn::TextureFormat::BGRA8UnormSrgb: |
| return DXGI_FORMAT_B8G8R8A8_UNORM_SRGB; |
| case dawn::TextureFormat::RGB10A2Unorm: |
| return DXGI_FORMAT_R10G10B10A2_UNORM; |
| case dawn::TextureFormat::RG11B10Float: |
| return DXGI_FORMAT_R11G11B10_FLOAT; |
| |
| case dawn::TextureFormat::RG32Uint: |
| return DXGI_FORMAT_R32G32_UINT; |
| case dawn::TextureFormat::RG32Sint: |
| return DXGI_FORMAT_R32G32_SINT; |
| case dawn::TextureFormat::RG32Float: |
| return DXGI_FORMAT_R32G32_FLOAT; |
| case dawn::TextureFormat::RGBA16Uint: |
| return DXGI_FORMAT_R16G16B16A16_UINT; |
| case dawn::TextureFormat::RGBA16Sint: |
| return DXGI_FORMAT_R16G16B16A16_SINT; |
| case dawn::TextureFormat::RGBA16Float: |
| return DXGI_FORMAT_R16G16B16A16_FLOAT; |
| |
| case dawn::TextureFormat::RGBA32Uint: |
| return DXGI_FORMAT_R32G32B32A32_UINT; |
| case dawn::TextureFormat::RGBA32Sint: |
| return DXGI_FORMAT_R32G32B32A32_SINT; |
| case dawn::TextureFormat::RGBA32Float: |
| return DXGI_FORMAT_R32G32B32A32_FLOAT; |
| |
| case dawn::TextureFormat::Depth32Float: |
| return DXGI_FORMAT_D32_FLOAT; |
| case dawn::TextureFormat::Depth24Plus: |
| return DXGI_FORMAT_D32_FLOAT; |
| case dawn::TextureFormat::Depth24PlusStencil8: |
| return DXGI_FORMAT_D32_FLOAT_S8X24_UINT; |
| |
| case dawn::TextureFormat::BC1RGBAUnorm: |
| return DXGI_FORMAT_BC1_UNORM; |
| case dawn::TextureFormat::BC1RGBAUnormSrgb: |
| return DXGI_FORMAT_BC1_UNORM_SRGB; |
| case dawn::TextureFormat::BC2RGBAUnorm: |
| return DXGI_FORMAT_BC2_UNORM; |
| case dawn::TextureFormat::BC2RGBAUnormSrgb: |
| return DXGI_FORMAT_BC2_UNORM_SRGB; |
| case dawn::TextureFormat::BC3RGBAUnorm: |
| return DXGI_FORMAT_BC3_UNORM; |
| case dawn::TextureFormat::BC3RGBAUnormSrgb: |
| return DXGI_FORMAT_BC3_UNORM_SRGB; |
| case dawn::TextureFormat::BC4RSnorm: |
| return DXGI_FORMAT_BC4_SNORM; |
| case dawn::TextureFormat::BC4RUnorm: |
| return DXGI_FORMAT_BC4_UNORM; |
| case dawn::TextureFormat::BC5RGSnorm: |
| return DXGI_FORMAT_BC5_SNORM; |
| case dawn::TextureFormat::BC5RGUnorm: |
| return DXGI_FORMAT_BC5_UNORM; |
| case dawn::TextureFormat::BC6HRGBSfloat: |
| return DXGI_FORMAT_BC6H_SF16; |
| case dawn::TextureFormat::BC6HRGBUfloat: |
| return DXGI_FORMAT_BC6H_UF16; |
| case dawn::TextureFormat::BC7RGBAUnorm: |
| return DXGI_FORMAT_BC7_UNORM; |
| case dawn::TextureFormat::BC7RGBAUnormSrgb: |
| return DXGI_FORMAT_BC7_UNORM_SRGB; |
| |
| default: |
| UNREACHABLE(); |
| } |
| } |
| |
| MaybeError ValidateTextureDescriptorCanBeWrapped(const TextureDescriptor* descriptor) { |
| if (descriptor->dimension != dawn::TextureDimension::e2D) { |
| return DAWN_VALIDATION_ERROR("Texture must be 2D"); |
| } |
| |
| if (descriptor->mipLevelCount != 1) { |
| return DAWN_VALIDATION_ERROR("Mip level count must be 1"); |
| } |
| |
| if (descriptor->arrayLayerCount != 1) { |
| return DAWN_VALIDATION_ERROR("Array layer count must be 1"); |
| } |
| |
| if (descriptor->sampleCount != 1) { |
| return DAWN_VALIDATION_ERROR("Sample count must be 1"); |
| } |
| |
| return {}; |
| } |
| |
| MaybeError ValidateD3D12TextureCanBeWrapped(ID3D12Resource* d3d12Resource, |
| const TextureDescriptor* dawnDescriptor) { |
| const D3D12_RESOURCE_DESC d3dDescriptor = d3d12Resource->GetDesc(); |
| if ((dawnDescriptor->size.width != d3dDescriptor.Width) || |
| (dawnDescriptor->size.height != d3dDescriptor.Height) || |
| (dawnDescriptor->size.depth != 1)) { |
| return DAWN_VALIDATION_ERROR("D3D12 texture size doesn't match descriptor"); |
| } |
| |
| const DXGI_FORMAT dxgiFormatFromDescriptor = D3D12TextureFormat(dawnDescriptor->format); |
| if (dxgiFormatFromDescriptor != d3dDescriptor.Format) { |
| return DAWN_VALIDATION_ERROR( |
| "D3D12 texture format must be compatible with descriptor format."); |
| } |
| |
| if (d3dDescriptor.MipLevels != 1) { |
| return DAWN_VALIDATION_ERROR("D3D12 texture number of miplevels must be 1."); |
| } |
| |
| if (d3dDescriptor.DepthOrArraySize != 1) { |
| return DAWN_VALIDATION_ERROR("D3D12 texture array size must be 1."); |
| } |
| |
| // Shared textures cannot be multi-sample so no need to check those. |
| ASSERT(d3dDescriptor.SampleDesc.Count == 1); |
| ASSERT(d3dDescriptor.SampleDesc.Quality == 0); |
| |
| return {}; |
| } |
| |
| Texture::Texture(Device* device, const TextureDescriptor* descriptor) |
| : TextureBase(device, descriptor, TextureState::OwnedInternal) { |
| D3D12_RESOURCE_DESC resourceDescriptor; |
| resourceDescriptor.Dimension = D3D12TextureDimension(GetDimension()); |
| resourceDescriptor.Alignment = 0; |
| |
| const Extent3D& size = GetSize(); |
| resourceDescriptor.Width = size.width; |
| resourceDescriptor.Height = size.height; |
| |
| resourceDescriptor.DepthOrArraySize = GetDepthOrArraySize(); |
| resourceDescriptor.MipLevels = static_cast<UINT16>(GetNumMipLevels()); |
| resourceDescriptor.Format = D3D12TextureFormat(GetFormat().format); |
| resourceDescriptor.SampleDesc.Count = descriptor->sampleCount; |
| // TODO(bryan.bernhart@intel.com): investigate how to specify standard MSAA sample pattern. |
| resourceDescriptor.SampleDesc.Quality = 0; |
| resourceDescriptor.Layout = D3D12_TEXTURE_LAYOUT_UNKNOWN; |
| resourceDescriptor.Flags = |
| D3D12ResourceFlags(GetUsage(), GetFormat(), IsMultisampledTexture()); |
| |
| mResource = ToBackend(GetDevice()) |
| ->GetResourceAllocator() |
| ->Allocate(D3D12_HEAP_TYPE_DEFAULT, resourceDescriptor, |
| D3D12_RESOURCE_STATE_COMMON); |
| |
| if (device->IsToggleEnabled(Toggle::NonzeroClearResourcesOnCreationForTesting)) { |
| device->ConsumedError(ClearTexture(device->GetPendingCommandList(), 0, |
| GetNumMipLevels(), 0, GetArrayLayers(), |
| TextureBase::ClearValue::NonZero)); |
| } |
| } |
| |
| // With this constructor, the lifetime of the ID3D12Resource is externally managed. |
| Texture::Texture(Device* device, |
| const TextureDescriptor* descriptor, |
| ID3D12Resource* nativeTexture) |
| : TextureBase(device, descriptor, TextureState::OwnedExternal), mResource(nativeTexture) { |
| SetIsSubresourceContentInitialized(0, descriptor->mipLevelCount, 0, |
| descriptor->arrayLayerCount); |
| } |
| |
| Texture::~Texture() { |
| DestroyInternal(); |
| } |
| |
| void Texture::DestroyImpl() { |
| // If we own the resource, release it. |
| ToBackend(GetDevice())->GetResourceAllocator()->Release(mResource); |
| mResource = nullptr; |
| } |
| |
| DXGI_FORMAT Texture::GetD3D12Format() const { |
| return D3D12TextureFormat(GetFormat().format); |
| } |
| |
| ID3D12Resource* Texture::GetD3D12Resource() const { |
| return mResource.Get(); |
| } |
| |
| UINT16 Texture::GetDepthOrArraySize() { |
| switch (GetDimension()) { |
| case dawn::TextureDimension::e2D: |
| return static_cast<UINT16>(GetArrayLayers()); |
| default: |
| UNREACHABLE(); |
| } |
| } |
| |
| // When true is returned, a D3D12_RESOURCE_BARRIER has been created and must be used in a |
| // ResourceBarrier call. Failing to do so will cause the tracked state to become invalid and can |
| // cause subsequent errors. |
| bool Texture::TransitionUsageAndGetResourceBarrier(D3D12_RESOURCE_BARRIER* barrier, |
| dawn::TextureUsage newUsage) { |
| return TransitionUsageAndGetResourceBarrier(barrier, |
| D3D12TextureUsage(newUsage, GetFormat())); |
| } |
| |
| // When true is returned, a D3D12_RESOURCE_BARRIER has been created and must be used in a |
| // ResourceBarrier call. Failing to do so will cause the tracked state to become invalid and can |
| // cause subsequent errors. |
| bool Texture::TransitionUsageAndGetResourceBarrier(D3D12_RESOURCE_BARRIER* barrier, |
| D3D12_RESOURCE_STATES newState) { |
| // Avoid transitioning the texture when it isn't needed. |
| // TODO(cwallez@chromium.org): Need some form of UAV barriers at some point. |
| if (mLastState == newState) { |
| return false; |
| } |
| |
| D3D12_RESOURCE_STATES lastState = mLastState; |
| |
| // The COMMON state represents a state where no write operations can be pending, and where |
| // all pixels are uncompressed. This makes it possible to transition to and from some states |
| // without synchronization (i.e. without an explicit ResourceBarrier call). Textures can be |
| // implicitly promoted to 1) a single write state, or 2) multiple read states. Textures will |
| // implicitly decay to the COMMON state when all of the following are true: 1) the texture |
| // is accessed on a command list, 2) the ExecuteCommandLists call that uses that command |
| // list has ended, and 3) the texture was promoted implicitly to a read-only state and is |
| // still in that state. |
| // https://docs.microsoft.com/en-us/windows/desktop/direct3d12/using-resource-barriers-to-synchronize-resource-states-in-direct3d-12#implicit-state-transitions |
| |
| // To track implicit decays, we must record the pending serial on which that transition will |
| // occur. When that texture is used again, the previously recorded serial must be compared |
| // to the last completed serial to determine if the texture has implicity decayed to the |
| // common state. |
| const Serial pendingCommandSerial = ToBackend(GetDevice())->GetPendingCommandSerial(); |
| if (mValidToDecay && pendingCommandSerial > mLastUsedSerial) { |
| lastState = D3D12_RESOURCE_STATE_COMMON; |
| } |
| |
| // Update the tracked state. |
| mLastState = newState; |
| |
| // Destination states that qualify for an implicit promotion for a non-simultaneous-access |
| // texture: NON_PIXEL_SHADER_RESOURCE, PIXEL_SHADER_RESOURCE, COPY_SRC, COPY_DEST. |
| { |
| static constexpr D3D12_RESOURCE_STATES kD3D12TextureReadOnlyStates = |
| D3D12_RESOURCE_STATE_COPY_SOURCE | D3D12_RESOURCE_STATE_PIXEL_SHADER_RESOURCE | |
| D3D12_RESOURCE_STATE_NON_PIXEL_SHADER_RESOURCE; |
| |
| if (lastState == D3D12_RESOURCE_STATE_COMMON) { |
| if (newState == (newState & kD3D12TextureReadOnlyStates)) { |
| // Implicit texture state decays can only occur when the texture was implicitly |
| // transitioned to a read-only state. mValidToDecay is needed to differentiate |
| // between resources that were implictly or explicitly transitioned to a |
| // read-only state. |
| mValidToDecay = true; |
| mLastUsedSerial = pendingCommandSerial; |
| return false; |
| } else if (newState == D3D12_RESOURCE_STATE_COPY_DEST) { |
| mValidToDecay = false; |
| return false; |
| } |
| } |
| } |
| |
| barrier->Type = D3D12_RESOURCE_BARRIER_TYPE_TRANSITION; |
| barrier->Flags = D3D12_RESOURCE_BARRIER_FLAG_NONE; |
| barrier->Transition.pResource = mResource.Get(); |
| barrier->Transition.StateBefore = lastState; |
| barrier->Transition.StateAfter = newState; |
| barrier->Transition.Subresource = D3D12_RESOURCE_BARRIER_ALL_SUBRESOURCES; |
| |
| mValidToDecay = false; |
| |
| return true; |
| } |
| |
| void Texture::TransitionUsageNow(ComPtr<ID3D12GraphicsCommandList> commandList, |
| dawn::TextureUsage usage) { |
| TransitionUsageNow(commandList, D3D12TextureUsage(usage, GetFormat())); |
| } |
| |
| void Texture::TransitionUsageNow(ComPtr<ID3D12GraphicsCommandList> commandList, |
| D3D12_RESOURCE_STATES newState) { |
| D3D12_RESOURCE_BARRIER barrier; |
| |
| if (TransitionUsageAndGetResourceBarrier(&barrier, newState)) { |
| commandList->ResourceBarrier(1, &barrier); |
| } |
| } |
| |
| D3D12_RENDER_TARGET_VIEW_DESC Texture::GetRTVDescriptor(uint32_t baseMipLevel, |
| uint32_t baseArrayLayer, |
| uint32_t layerCount) const { |
| ASSERT(GetDimension() == dawn::TextureDimension::e2D); |
| D3D12_RENDER_TARGET_VIEW_DESC rtvDesc; |
| rtvDesc.Format = GetD3D12Format(); |
| if (IsMultisampledTexture()) { |
| ASSERT(GetNumMipLevels() == 1); |
| ASSERT(layerCount == 1); |
| ASSERT(baseArrayLayer == 0); |
| ASSERT(baseMipLevel == 0); |
| rtvDesc.ViewDimension = D3D12_RTV_DIMENSION_TEXTURE2DMS; |
| } else { |
| // Currently we always use D3D12_TEX2D_ARRAY_RTV because we cannot specify base array |
| // layer and layer count in D3D12_TEX2D_RTV. For 2D texture views, we treat them as |
| // 1-layer 2D array textures. (Just like how we treat SRVs) |
| // https://docs.microsoft.com/en-us/windows/desktop/api/d3d12/ns-d3d12-d3d12_tex2d_rtv |
| // https://docs.microsoft.com/en-us/windows/desktop/api/d3d12/ns-d3d12-d3d12_tex2d_array |
| // _rtv |
| rtvDesc.ViewDimension = D3D12_RTV_DIMENSION_TEXTURE2DARRAY; |
| rtvDesc.Texture2DArray.FirstArraySlice = baseArrayLayer; |
| rtvDesc.Texture2DArray.ArraySize = layerCount; |
| rtvDesc.Texture2DArray.MipSlice = baseMipLevel; |
| rtvDesc.Texture2DArray.PlaneSlice = 0; |
| } |
| return rtvDesc; |
| } |
| |
| D3D12_DEPTH_STENCIL_VIEW_DESC Texture::GetDSVDescriptor(uint32_t baseMipLevel) const { |
| D3D12_DEPTH_STENCIL_VIEW_DESC dsvDesc; |
| dsvDesc.Format = GetD3D12Format(); |
| dsvDesc.Flags = D3D12_DSV_FLAG_NONE; |
| ASSERT(baseMipLevel == 0); |
| |
| if (IsMultisampledTexture()) { |
| dsvDesc.ViewDimension = D3D12_DSV_DIMENSION_TEXTURE2DMS; |
| } else { |
| dsvDesc.ViewDimension = D3D12_DSV_DIMENSION_TEXTURE2D; |
| dsvDesc.Texture2D.MipSlice = baseMipLevel; |
| } |
| |
| return dsvDesc; |
| } |
| |
| MaybeError Texture::ClearTexture(ComPtr<ID3D12GraphicsCommandList> commandList, |
| uint32_t baseMipLevel, |
| uint32_t levelCount, |
| uint32_t baseArrayLayer, |
| uint32_t layerCount, |
| TextureBase::ClearValue clearValue) { |
| // TODO(jiawei.shao@intel.com): initialize the textures in compressed formats with copies. |
| if (GetFormat().isCompressed) { |
| SetIsSubresourceContentInitialized(baseMipLevel, levelCount, baseArrayLayer, |
| layerCount); |
| return {}; |
| } |
| |
| Device* device = ToBackend(GetDevice()); |
| DescriptorHeapAllocator* descriptorHeapAllocator = device->GetDescriptorHeapAllocator(); |
| uint8_t clearColor = (clearValue == TextureBase::ClearValue::Zero) ? 0 : 1; |
| if (GetFormat().isRenderable) { |
| if (GetFormat().HasDepthOrStencil()) { |
| TransitionUsageNow(commandList, D3D12_RESOURCE_STATE_DEPTH_WRITE); |
| DescriptorHeapHandle dsvHeap = |
| descriptorHeapAllocator->AllocateCPUHeap(D3D12_DESCRIPTOR_HEAP_TYPE_DSV, 1); |
| D3D12_CPU_DESCRIPTOR_HANDLE dsvHandle = dsvHeap.GetCPUHandle(0); |
| D3D12_DEPTH_STENCIL_VIEW_DESC dsvDesc = GetDSVDescriptor(baseMipLevel); |
| device->GetD3D12Device()->CreateDepthStencilView(mResource.Get(), &dsvDesc, |
| dsvHandle); |
| |
| D3D12_CLEAR_FLAGS clearFlags = {}; |
| if (GetFormat().HasDepth()) { |
| clearFlags |= D3D12_CLEAR_FLAG_DEPTH; |
| } |
| if (GetFormat().HasStencil()) { |
| clearFlags |= D3D12_CLEAR_FLAG_STENCIL; |
| } |
| |
| commandList->ClearDepthStencilView(dsvHandle, clearFlags, clearColor, clearColor, 0, |
| nullptr); |
| } else { |
| TransitionUsageNow(commandList, D3D12_RESOURCE_STATE_RENDER_TARGET); |
| DescriptorHeapHandle rtvHeap = |
| descriptorHeapAllocator->AllocateCPUHeap(D3D12_DESCRIPTOR_HEAP_TYPE_RTV, 1); |
| D3D12_CPU_DESCRIPTOR_HANDLE rtvHandle = rtvHeap.GetCPUHandle(0); |
| const float clearColorRGBA[4] = {clearColor, clearColor, clearColor, clearColor}; |
| |
| // TODO(natlee@microsoft.com): clear all array layers for 2D array textures |
| for (uint32_t i = baseMipLevel; i < baseMipLevel + levelCount; i++) { |
| D3D12_RENDER_TARGET_VIEW_DESC rtvDesc = |
| GetRTVDescriptor(i, baseArrayLayer, layerCount); |
| device->GetD3D12Device()->CreateRenderTargetView(mResource.Get(), &rtvDesc, |
| rtvHandle); |
| commandList->ClearRenderTargetView(rtvHandle, clearColorRGBA, 0, nullptr); |
| } |
| } |
| } else { |
| // TODO(natlee@microsoft.com): test compressed textures are cleared |
| // create temp buffer with clear color to copy to the texture image |
| uint32_t rowPitch = |
| Align((GetSize().width / GetFormat().blockWidth) * GetFormat().blockByteSize, |
| kTextureRowPitchAlignment); |
| uint64_t bufferSize64 = rowPitch * (GetSize().height / GetFormat().blockHeight); |
| if (bufferSize64 > std::numeric_limits<uint32_t>::max()) { |
| return DAWN_OUT_OF_MEMORY_ERROR("Unable to allocate buffer."); |
| } |
| uint32_t bufferSize = static_cast<uint32_t>(bufferSize64); |
| DynamicUploader* uploader = device->GetDynamicUploader(); |
| UploadHandle uploadHandle; |
| DAWN_TRY_ASSIGN(uploadHandle, |
| uploader->Allocate(bufferSize, device->GetPendingCommandSerial())); |
| std::fill(reinterpret_cast<uint32_t*>(uploadHandle.mappedBuffer), |
| reinterpret_cast<uint32_t*>(uploadHandle.mappedBuffer + bufferSize), |
| clearColor); |
| |
| TransitionUsageNow(commandList, D3D12_RESOURCE_STATE_COPY_DEST); |
| |
| // compute d3d12 texture copy locations for texture and buffer |
| Extent3D copySize = {GetSize().width, GetSize().height, 1}; |
| TextureCopySplit copySplit = ComputeTextureCopySplit( |
| {0, 0, 0}, copySize, GetFormat(), uploadHandle.startOffset, rowPitch, 0); |
| |
| for (uint32_t level = baseMipLevel; level < baseMipLevel + levelCount; ++level) { |
| for (uint32_t layer = baseArrayLayer; layer < baseArrayLayer + layerCount; |
| ++layer) { |
| D3D12_TEXTURE_COPY_LOCATION textureLocation = |
| ComputeTextureCopyLocationForTexture(this, level, layer); |
| for (uint32_t i = 0; i < copySplit.count; ++i) { |
| TextureCopySplit::CopyInfo& info = copySplit.copies[i]; |
| |
| D3D12_TEXTURE_COPY_LOCATION bufferLocation = |
| ComputeBufferLocationForCopyTextureRegion( |
| this, ToBackend(uploadHandle.stagingBuffer)->GetResource(), |
| info.bufferSize, copySplit.offset, rowPitch); |
| D3D12_BOX sourceRegion = |
| ComputeD3D12BoxFromOffsetAndSize(info.bufferOffset, info.copySize); |
| |
| // copy the buffer filled with clear color to the texture |
| commandList->CopyTextureRegion(&textureLocation, info.textureOffset.x, |
| info.textureOffset.y, info.textureOffset.z, |
| &bufferLocation, &sourceRegion); |
| } |
| } |
| } |
| } |
| if (clearValue == TextureBase::ClearValue::Zero) { |
| SetIsSubresourceContentInitialized(baseMipLevel, levelCount, baseArrayLayer, |
| layerCount); |
| GetDevice()->IncrementLazyClearCountForTesting(); |
| } |
| return {}; |
| } |
| |
| void Texture::EnsureSubresourceContentInitialized(ComPtr<ID3D12GraphicsCommandList> commandList, |
| uint32_t baseMipLevel, |
| uint32_t levelCount, |
| uint32_t baseArrayLayer, |
| uint32_t layerCount) { |
| if (!ToBackend(GetDevice())->IsToggleEnabled(Toggle::LazyClearResourceOnFirstUse)) { |
| return; |
| } |
| if (!IsSubresourceContentInitialized(baseMipLevel, levelCount, baseArrayLayer, |
| layerCount)) { |
| // If subresource has not been initialized, clear it to black as it could contain |
| // dirty bits from recycled memory |
| GetDevice()->ConsumedError(ClearTexture(commandList, baseMipLevel, levelCount, |
| baseArrayLayer, layerCount, |
| TextureBase::ClearValue::Zero)); |
| } |
| } |
| |
| TextureView::TextureView(TextureBase* texture, const TextureViewDescriptor* descriptor) |
| : TextureViewBase(texture, descriptor) { |
| mSrvDesc.Format = D3D12TextureFormat(descriptor->format); |
| mSrvDesc.Shader4ComponentMapping = D3D12_DEFAULT_SHADER_4_COMPONENT_MAPPING; |
| |
| // Currently we always use D3D12_TEX2D_ARRAY_SRV because we cannot specify base array layer |
| // and layer count in D3D12_TEX2D_SRV. For 2D texture views, we treat them as 1-layer 2D |
| // array textures. |
| // https://docs.microsoft.com/en-us/windows/desktop/api/d3d12/ns-d3d12-d3d12_tex2d_srv |
| // https://docs.microsoft.com/en-us/windows/desktop/api/d3d12/ns-d3d12-d3d12_tex2d_array_srv |
| // TODO(jiawei.shao@intel.com): support more texture view dimensions. |
| // TODO(jiawei.shao@intel.com): support creating SRV on multisampled textures. |
| switch (descriptor->dimension) { |
| case dawn::TextureViewDimension::e2D: |
| case dawn::TextureViewDimension::e2DArray: |
| ASSERT(texture->GetDimension() == dawn::TextureDimension::e2D); |
| mSrvDesc.ViewDimension = D3D12_SRV_DIMENSION_TEXTURE2DARRAY; |
| mSrvDesc.Texture2DArray.ArraySize = descriptor->arrayLayerCount; |
| mSrvDesc.Texture2DArray.FirstArraySlice = descriptor->baseArrayLayer; |
| mSrvDesc.Texture2DArray.MipLevels = descriptor->mipLevelCount; |
| mSrvDesc.Texture2DArray.MostDetailedMip = descriptor->baseMipLevel; |
| mSrvDesc.Texture2DArray.PlaneSlice = 0; |
| mSrvDesc.Texture2DArray.ResourceMinLODClamp = 0; |
| break; |
| case dawn::TextureViewDimension::Cube: |
| case dawn::TextureViewDimension::CubeArray: |
| ASSERT(texture->GetDimension() == dawn::TextureDimension::e2D); |
| ASSERT(descriptor->arrayLayerCount % 6 == 0); |
| mSrvDesc.ViewDimension = D3D12_SRV_DIMENSION_TEXTURECUBEARRAY; |
| mSrvDesc.TextureCubeArray.First2DArrayFace = descriptor->baseArrayLayer; |
| mSrvDesc.TextureCubeArray.NumCubes = descriptor->arrayLayerCount / 6; |
| mSrvDesc.TextureCubeArray.MostDetailedMip = descriptor->baseMipLevel; |
| mSrvDesc.TextureCubeArray.MipLevels = descriptor->mipLevelCount; |
| mSrvDesc.TextureCubeArray.ResourceMinLODClamp = 0; |
| break; |
| default: |
| UNREACHABLE(); |
| } |
| } |
| |
| DXGI_FORMAT TextureView::GetD3D12Format() const { |
| return D3D12TextureFormat(GetFormat().format); |
| } |
| |
| const D3D12_SHADER_RESOURCE_VIEW_DESC& TextureView::GetSRVDescriptor() const { |
| return mSrvDesc; |
| } |
| |
| D3D12_RENDER_TARGET_VIEW_DESC TextureView::GetRTVDescriptor() const { |
| return ToBackend(GetTexture()) |
| ->GetRTVDescriptor(GetBaseMipLevel(), GetBaseArrayLayer(), GetLayerCount()); |
| } |
| |
| D3D12_DEPTH_STENCIL_VIEW_DESC TextureView::GetDSVDescriptor() const { |
| // TODO(jiawei.shao@intel.com): support rendering into a layer of a texture. |
| ASSERT(GetLayerCount() == 1); |
| ASSERT(GetLevelCount() == 1); |
| ASSERT(GetBaseMipLevel() == 0); |
| ASSERT(GetBaseArrayLayer() == 0); |
| return ToBackend(GetTexture())->GetDSVDescriptor(GetBaseMipLevel()); |
| } |
| |
| }} // namespace dawn_native::d3d12 |
