| // Copyright 2021 The Dawn & Tint Authors | |
| // | |
| // Redistribution and use in source and binary forms, with or without | |
| // modification, are permitted provided that the following conditions are met: | |
| // | |
| // 1. Redistributions of source code must retain the above copyright notice, this | |
| // list of conditions and the following disclaimer. | |
| // | |
| // 2. Redistributions in binary form must reproduce the above copyright notice, | |
| // this list of conditions and the following disclaimer in the documentation | |
| // and/or other materials provided with the distribution. | |
| // | |
| // 3. Neither the name of the copyright holder nor the names of its | |
| // contributors may be used to endorse or promote products derived from | |
| // this software without specific prior written permission. | |
| // | |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| // DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
| // FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| // DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
| // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
| // CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
| // OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| #include "dawn/native/CompilationMessages.h" | |
| #include "dawn/common/Assert.h" | |
| #include "dawn/common/StringViewUtils.h" | |
| #include "dawn/native/dawn_platform.h" | |
| #include "tint/tint.h" | |
| namespace dawn::native { | |
| namespace { | |
| wgpu::CompilationMessageType TintSeverityToMessageType(tint::diag::Severity severity) { | |
| switch (severity) { | |
| case tint::diag::Severity::Note: | |
| return wgpu::CompilationMessageType::Info; | |
| case tint::diag::Severity::Warning: | |
| return wgpu::CompilationMessageType::Warning; | |
| default: | |
| return wgpu::CompilationMessageType::Error; | |
| } | |
| } | |
| } // anonymous namespace | |
| ResultOrError<uint64_t> CountUTF16CodeUnitsFromUTF8String(const std::string_view& utf8String) { | |
| if (tint::utf8::IsASCII(utf8String)) { | |
| return utf8String.size(); | |
| } | |
| uint64_t numberOfUTF16CodeUnits = 0; | |
| std::string_view remaining = utf8String; | |
| while (!remaining.empty()) { | |
| auto [codePoint, utf8CharacterByteLength] = tint::utf8::Decode(remaining); | |
| // Directly return as something wrong has happened during the UTF-8 decoding. | |
| if (utf8CharacterByteLength == 0) { | |
| return DAWN_INTERNAL_ERROR("Fail to decode the unicode string"); | |
| } | |
| remaining = remaining.substr(utf8CharacterByteLength); | |
| // Count the number of code units in UTF-16. See https://en.wikipedia.org/wiki/UTF-16 for | |
| // more details. | |
| if (codePoint.value <= 0xD7FF || (codePoint.value >= 0xE000 && codePoint.value <= 0xFFFF)) { | |
| // Code points from U+0000 to U+D7FF and U+E000 to U+FFFF are encoded as single 16-bit | |
| // code units. | |
| ++numberOfUTF16CodeUnits; | |
| } else if (codePoint.value >= 0x10000) { | |
| // Code points from U+010000 to U+10FFFF are encoded as two 16-bit code units. | |
| numberOfUTF16CodeUnits += 2; | |
| } else { | |
| // UTF-16 cannot encode the code points from U+D800 to U+DFFF. | |
| return DAWN_INTERNAL_ERROR("The unicode string contains illegal unicode code point."); | |
| } | |
| } | |
| return numberOfUTF16CodeUnits; | |
| } | |
| OwnedCompilationMessages::OwnedCompilationMessages() = default; | |
| OwnedCompilationMessages::~OwnedCompilationMessages() = default; | |
| void OwnedCompilationMessages::AddUnanchoredMessage(std::string_view message, | |
| wgpu::CompilationMessageType type) { | |
| CompilationMessage m = {}; | |
| m.message = message; | |
| m.type = type; | |
| AddMessage(m); | |
| } | |
| void OwnedCompilationMessages::AddMessageForTesting(std::string_view message, | |
| wgpu::CompilationMessageType type, | |
| uint64_t lineNum, | |
| uint64_t linePos, | |
| uint64_t offset, | |
| uint64_t length) { | |
| CompilationMessage m = {}; | |
| m.message = message; | |
| m.type = type; | |
| m.lineNum = lineNum; | |
| m.linePos = linePos; | |
| m.offset = offset; | |
| m.length = length; | |
| m.utf16LinePos = linePos; | |
| m.utf16Offset = offset; | |
| m.utf16Length = length; | |
| AddMessage(m); | |
| } | |
| MaybeError OwnedCompilationMessages::AddMessage(const tint::diag::Diagnostic& diagnostic) { | |
| // Tint line and column values are 1-based. | |
| uint64_t lineNum = diagnostic.source.range.begin.line; | |
| uint64_t linePosInBytes = diagnostic.source.range.begin.column; | |
| // The offset is 0-based. | |
| uint64_t offsetInBytes = 0; | |
| uint64_t lengthInBytes = 0; | |
| uint64_t linePosInUTF16 = 0; | |
| uint64_t offsetInUTF16 = 0; | |
| uint64_t lengthInUTF16 = 0; | |
| if (lineNum && linePosInBytes && diagnostic.source.file) { | |
| const tint::Source::FileContent& content = diagnostic.source.file->content; | |
| // Tint stores line as std::string_view in a complete source std::string that's in the | |
| // source file. So to get the offset in bytes of a line we just need to substract its start | |
| // pointer with the start of the file's content. Note that line numbering in Tint source | |
| // range starts at 1 while the array of lines start at 0 (hence the -1). | |
| const char* fileStart = content.data.data(); | |
| const char* lineStart = content.lines[lineNum - 1].data(); | |
| offsetInBytes = static_cast<uint64_t>(lineStart - fileStart) + linePosInBytes - 1; | |
| // The linePosInBytes is 1-based. | |
| uint64_t linePosOffsetInUTF16 = 0; | |
| DAWN_TRY_ASSIGN(linePosOffsetInUTF16, CountUTF16CodeUnitsFromUTF8String( | |
| std::string_view(lineStart, linePosInBytes - 1))); | |
| linePosInUTF16 = linePosOffsetInUTF16 + 1; | |
| // The offset is 0-based. | |
| uint64_t lineStartToFileStartOffsetInUTF16 = 0; | |
| DAWN_TRY_ASSIGN(lineStartToFileStartOffsetInUTF16, | |
| CountUTF16CodeUnitsFromUTF8String(std::string_view( | |
| fileStart, static_cast<uint64_t>(lineStart - fileStart)))); | |
| offsetInUTF16 = lineStartToFileStartOffsetInUTF16 + linePosInUTF16 - 1; | |
| // If the range has a valid start but the end is not specified, clamp it to the start. | |
| uint64_t endLineNum = diagnostic.source.range.end.line; | |
| uint64_t endLineCol = diagnostic.source.range.end.column; | |
| if (endLineNum == 0 || endLineCol == 0) { | |
| endLineNum = lineNum; | |
| endLineCol = linePosInBytes; | |
| } | |
| const char* endLineStart = content.lines[endLineNum - 1].data(); | |
| uint64_t endOffsetInBytes = | |
| static_cast<uint64_t>(endLineStart - fileStart) + endLineCol - 1; | |
| // The length of the message is the difference between the starting offset and the | |
| // ending offset. Negative ranges aren't allowed. | |
| DAWN_ASSERT(endOffsetInBytes >= offsetInBytes); | |
| lengthInBytes = endOffsetInBytes - offsetInBytes; | |
| DAWN_TRY_ASSIGN(lengthInUTF16, CountUTF16CodeUnitsFromUTF8String(std::string_view( | |
| fileStart + offsetInBytes, lengthInBytes))); | |
| } | |
| std::string plainMessage = diagnostic.message.Plain(); | |
| CompilationMessage m = {}; | |
| m.message = std::string_view(plainMessage); | |
| m.type = TintSeverityToMessageType(diagnostic.severity); | |
| m.lineNum = lineNum; | |
| m.linePos = linePosInBytes; | |
| m.offset = offsetInBytes; | |
| m.length = lengthInBytes; | |
| m.utf16LinePos = linePosInUTF16; | |
| m.utf16Offset = offsetInUTF16; | |
| m.utf16Length = lengthInUTF16; | |
| AddMessage(m); | |
| return {}; | |
| } | |
| void OwnedCompilationMessages::AddMessage(const CompilationMessage& message) { | |
| // Cannot add messages after GetCompilationInfo has been called. | |
| DAWN_ASSERT(!mCompilationInfo->has_value()); | |
| DAWN_ASSERT(message.nextInChain == nullptr); | |
| mMessages.push_back(message); | |
| // Own the contents of the message as it might be freed afterwards. | |
| // Note that we use make_unique here as moving strings doesn't guarantee that the data pointer | |
| // stays the same, for example if there's some small string optimization. | |
| mMessageStrings.push_back(std::make_unique<std::string>(message.message)); | |
| mMessages.back().message = ToOutputStringView(*mMessageStrings.back()); | |
| } | |
| MaybeError OwnedCompilationMessages::AddMessages(const tint::diag::List& diagnostics) { | |
| // Cannot add messages after GetCompilationInfo has been called. | |
| DAWN_ASSERT(!mCompilationInfo->has_value()); | |
| for (const auto& diag : diagnostics) { | |
| DAWN_TRY(AddMessage(diag)); | |
| } | |
| AddFormattedTintMessages(diagnostics); | |
| return {}; | |
| } | |
| void OwnedCompilationMessages::ClearMessages() { | |
| // Cannot clear messages after GetCompilationInfo has been called. | |
| DAWN_ASSERT(!mCompilationInfo->has_value()); | |
| mMessageStrings.clear(); | |
| mMessages.clear(); | |
| } | |
| const CompilationInfo* OwnedCompilationMessages::GetCompilationInfo() { | |
| return mCompilationInfo.Use([&](auto info) { | |
| if (info->has_value()) { | |
| return &info->value(); | |
| } | |
| (*info).emplace(); | |
| (*info)->messageCount = mMessages.size(); | |
| (*info)->messages = mMessages.data(); | |
| return &info->value(); | |
| }); | |
| } | |
| const std::vector<std::string>& OwnedCompilationMessages::GetFormattedTintMessages() const { | |
| return mFormattedTintMessages; | |
| } | |
| bool OwnedCompilationMessages::HasWarningsOrErrors() const { | |
| for (const auto& message : mMessages) { | |
| if (message.type == wgpu::CompilationMessageType::Error || | |
| message.type == wgpu::CompilationMessageType::Warning) { | |
| return true; | |
| } | |
| } | |
| return false; | |
| } | |
| void OwnedCompilationMessages::AddFormattedTintMessages(const tint::diag::List& diagnostics) { | |
| tint::diag::List messageList; | |
| size_t warningCount = 0; | |
| size_t errorCount = 0; | |
| for (auto& diag : diagnostics) { | |
| switch (diag.severity) { | |
| case tint::diag::Severity::Error: { | |
| errorCount++; | |
| messageList.Add(diag); | |
| break; | |
| } | |
| case tint::diag::Severity::Warning: { | |
| warningCount++; | |
| messageList.Add(diag); | |
| break; | |
| } | |
| case tint::diag::Severity::Note: { | |
| messageList.Add(diag); | |
| break; | |
| } | |
| default: | |
| break; | |
| } | |
| } | |
| if (errorCount == 0 && warningCount == 0) { | |
| return; | |
| } | |
| tint::diag::Formatter::Style style; | |
| style.print_newline_at_end = false; | |
| std::ostringstream t; | |
| if (errorCount > 0) { | |
| t << errorCount << " error(s) "; | |
| if (warningCount > 0) { | |
| t << "and "; | |
| } | |
| } | |
| if (warningCount > 0) { | |
| t << warningCount << " warning(s) "; | |
| } | |
| t << "generated while compiling the shader:\n" | |
| << tint::diag::Formatter{style}.Format(messageList).Plain(); | |
| mFormattedTintMessages.push_back(t.str()); | |
| } | |
| } // namespace dawn::native |