| // Copyright 2017 The Dawn Authors |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #ifndef TESTS_DAWNTEST_H_ |
| #define TESTS_DAWNTEST_H_ |
| |
| #include "common/Log.h" |
| #include "dawn/dawn_proc_table.h" |
| #include "dawn/webgpu_cpp.h" |
| #include "dawn_native/DawnNative.h" |
| |
| #include <gtest/gtest.h> |
| |
| #include <memory> |
| #include <unordered_map> |
| #include <vector> |
| |
| // Getting data back from Dawn is done in an async manners so all expectations are "deferred" |
| // until the end of the test. Also expectations use a copy to a MapRead buffer to get the data |
| // so resources should have the CopySrc allowed usage bit if you want to add expectations on |
| // them. |
| #define EXPECT_BUFFER_U16_EQ(expected, buffer, offset) \ |
| AddBufferExpectation(__FILE__, __LINE__, buffer, offset, sizeof(uint16_t), \ |
| new ::detail::ExpectEq<uint16_t>(expected)) |
| |
| #define EXPECT_BUFFER_U16_RANGE_EQ(expected, buffer, offset, count) \ |
| AddBufferExpectation(__FILE__, __LINE__, buffer, offset, sizeof(uint16_t) * count, \ |
| new ::detail::ExpectEq<uint16_t>(expected, count)) |
| |
| #define EXPECT_BUFFER_U32_EQ(expected, buffer, offset) \ |
| AddBufferExpectation(__FILE__, __LINE__, buffer, offset, sizeof(uint32_t), \ |
| new ::detail::ExpectEq<uint32_t>(expected)) |
| |
| #define EXPECT_BUFFER_U32_RANGE_EQ(expected, buffer, offset, count) \ |
| AddBufferExpectation(__FILE__, __LINE__, buffer, offset, sizeof(uint32_t) * count, \ |
| new ::detail::ExpectEq<uint32_t>(expected, count)) |
| |
| #define EXPECT_BUFFER_FLOAT_EQ(expected, buffer, offset) \ |
| AddBufferExpectation(__FILE__, __LINE__, buffer, offset, sizeof(uint32_t), \ |
| new ::detail::ExpectEq<float>(expected)) |
| |
| #define EXPECT_BUFFER_FLOAT_RANGE_EQ(expected, buffer, offset, count) \ |
| AddBufferExpectation(__FILE__, __LINE__, buffer, offset, sizeof(uint32_t) * count, \ |
| new ::detail::ExpectEq<float>(expected, count)) |
| |
| // Test a pixel of the mip level 0 of a 2D texture. |
| #define EXPECT_PIXEL_RGBA8_EQ(expected, texture, x, y) \ |
| AddTextureExpectation(__FILE__, __LINE__, texture, x, y, 1, 1, 0, 0, sizeof(RGBA8), \ |
| new ::detail::ExpectEq<RGBA8>(expected)) |
| |
| #define EXPECT_TEXTURE_RGBA8_EQ(expected, texture, x, y, width, height, level, slice) \ |
| AddTextureExpectation(__FILE__, __LINE__, texture, x, y, width, height, level, slice, \ |
| sizeof(RGBA8), \ |
| new ::detail::ExpectEq<RGBA8>(expected, (width) * (height))) |
| |
| #define EXPECT_PIXEL_FLOAT_EQ(expected, texture, x, y) \ |
| AddTextureExpectation(__FILE__, __LINE__, texture, x, y, 1, 1, 0, 0, sizeof(float), \ |
| new ::detail::ExpectEq<float>(expected)) |
| |
| #define EXPECT_TEXTURE_FLOAT_EQ(expected, texture, x, y, width, height, level, slice) \ |
| AddTextureExpectation(__FILE__, __LINE__, texture, x, y, width, height, level, slice, \ |
| sizeof(float), \ |
| new ::detail::ExpectEq<float>(expected, (width) * (height))) |
| |
| // Should only be used to test validation of function that can't be tested by regular validation |
| // tests; |
| #define ASSERT_DEVICE_ERROR(statement) \ |
| StartExpectDeviceError(); \ |
| statement; \ |
| FlushWire(); \ |
| if (!EndExpectDeviceError()) { \ |
| FAIL() << "Expected device error in:\n " << #statement; \ |
| } \ |
| do { \ |
| } while (0) |
| |
| struct RGBA8 { |
| constexpr RGBA8() : RGBA8(0, 0, 0, 0) { |
| } |
| constexpr RGBA8(uint8_t r, uint8_t g, uint8_t b, uint8_t a) : r(r), g(g), b(b), a(a) { |
| } |
| bool operator==(const RGBA8& other) const; |
| bool operator!=(const RGBA8& other) const; |
| |
| uint8_t r, g, b, a; |
| |
| static const RGBA8 kZero; |
| static const RGBA8 kBlack; |
| static const RGBA8 kRed; |
| static const RGBA8 kGreen; |
| static const RGBA8 kBlue; |
| static const RGBA8 kYellow; |
| static const RGBA8 kWhite; |
| }; |
| std::ostream& operator<<(std::ostream& stream, const RGBA8& color); |
| |
| struct BackendTestConfig { |
| BackendTestConfig(wgpu::BackendType backendType, |
| std::initializer_list<const char*> forceEnabledWorkarounds = {}, |
| std::initializer_list<const char*> forceDisabledWorkarounds = {}); |
| |
| wgpu::BackendType backendType; |
| |
| std::vector<const char*> forceEnabledWorkarounds; |
| std::vector<const char*> forceDisabledWorkarounds; |
| }; |
| |
| struct TestAdapterProperties : wgpu::AdapterProperties { |
| TestAdapterProperties(const wgpu::AdapterProperties& properties, bool selected); |
| std::string adapterName; |
| bool selected; |
| |
| private: |
| // This may be temporary, so it is copied into |adapterName| and made private. |
| using wgpu::AdapterProperties::name; |
| }; |
| |
| struct AdapterTestParam { |
| AdapterTestParam(const BackendTestConfig& config, |
| const TestAdapterProperties& adapterProperties); |
| |
| TestAdapterProperties adapterProperties; |
| std::vector<const char*> forceEnabledWorkarounds; |
| std::vector<const char*> forceDisabledWorkarounds; |
| }; |
| |
| std::ostream& operator<<(std::ostream& os, const AdapterTestParam& param); |
| |
| BackendTestConfig D3D12Backend(std::initializer_list<const char*> forceEnabledWorkarounds = {}, |
| std::initializer_list<const char*> forceDisabledWorkarounds = {}); |
| |
| BackendTestConfig MetalBackend(std::initializer_list<const char*> forceEnabledWorkarounds = {}, |
| std::initializer_list<const char*> forceDisabledWorkarounds = {}); |
| |
| BackendTestConfig NullBackend(std::initializer_list<const char*> forceEnabledWorkarounds = {}, |
| std::initializer_list<const char*> forceDisabledWorkarounds = {}); |
| |
| BackendTestConfig OpenGLBackend(std::initializer_list<const char*> forceEnabledWorkarounds = {}, |
| std::initializer_list<const char*> forceDisabledWorkarounds = {}); |
| |
| BackendTestConfig VulkanBackend(std::initializer_list<const char*> forceEnabledWorkarounds = {}, |
| std::initializer_list<const char*> forceDisabledWorkarounds = {}); |
| |
| namespace utils { |
| class TerribleCommandBuffer; |
| } // namespace utils |
| |
| namespace detail { |
| class Expectation; |
| } // namespace detail |
| |
| namespace dawn_wire { |
| class CommandHandler; |
| class WireClient; |
| class WireServer; |
| } // namespace dawn_wire |
| |
| void InitDawnEnd2EndTestEnvironment(int argc, char** argv); |
| |
| class DawnTestEnvironment : public testing::Environment { |
| public: |
| DawnTestEnvironment(int argc, char** argv); |
| ~DawnTestEnvironment() override = default; |
| |
| static void SetEnvironment(DawnTestEnvironment* env); |
| |
| std::vector<AdapterTestParam> GetAvailableAdapterTestParamsForBackends( |
| const BackendTestConfig* params, |
| size_t numParams); |
| |
| void SetUp() override; |
| void TearDown() override; |
| |
| bool UsesWire() const; |
| bool IsBackendValidationEnabled() const; |
| bool IsDawnValidationSkipped() const; |
| bool IsSpvcBeingUsed() const; |
| bool IsSpvcParserBeingUsed() const; |
| dawn_native::Instance* GetInstance() const; |
| bool HasVendorIdFilter() const; |
| uint32_t GetVendorIdFilter() const; |
| const char* GetWireTraceDir() const; |
| |
| protected: |
| std::unique_ptr<dawn_native::Instance> mInstance; |
| |
| private: |
| void ParseArgs(int argc, char** argv); |
| std::unique_ptr<dawn_native::Instance> CreateInstanceAndDiscoverAdapters() const; |
| void SelectPreferredAdapterProperties(const dawn_native::Instance* instance); |
| void PrintTestConfigurationAndAdapterInfo() const; |
| |
| bool mUseWire = false; |
| bool mEnableBackendValidation = false; |
| bool mSkipDawnValidation = false; |
| bool mUseSpvc = false; |
| bool mSpvcFlagSeen = false; |
| bool mUseSpvcParser = false; |
| bool mSpvcParserFlagSeen = false; |
| bool mBeginCaptureOnStartup = false; |
| bool mHasVendorIdFilter = false; |
| uint32_t mVendorIdFilter = 0; |
| std::string mWireTraceDir; |
| std::vector<dawn_native::DeviceType> mDevicePreferences; |
| std::vector<TestAdapterProperties> mAdapterProperties; |
| }; |
| |
| class DawnTestBase { |
| friend class DawnPerfTestBase; |
| |
| public: |
| DawnTestBase(const AdapterTestParam& param); |
| virtual ~DawnTestBase(); |
| |
| void SetUp(); |
| void TearDown(); |
| |
| bool IsD3D12() const; |
| bool IsMetal() const; |
| bool IsNull() const; |
| bool IsOpenGL() const; |
| bool IsVulkan() const; |
| |
| bool IsAMD() const; |
| bool IsARM() const; |
| bool IsImgTec() const; |
| bool IsIntel() const; |
| bool IsNvidia() const; |
| bool IsQualcomm() const; |
| bool IsSwiftshader() const; |
| |
| bool IsWindows() const; |
| bool IsLinux() const; |
| bool IsMacOS() const; |
| |
| bool UsesWire() const; |
| bool IsBackendValidationEnabled() const; |
| bool IsDawnValidationSkipped() const; |
| bool IsSpvcBeingUsed() const; |
| bool IsSpvcParserBeingUsed() const; |
| |
| bool IsAsan() const; |
| |
| void StartExpectDeviceError(); |
| bool EndExpectDeviceError(); |
| |
| bool HasVendorIdFilter() const; |
| uint32_t GetVendorIdFilter() const; |
| |
| wgpu::Instance GetInstance() const; |
| dawn_native::Adapter GetAdapter() const; |
| |
| protected: |
| wgpu::Device device; |
| wgpu::Queue queue; |
| |
| DawnProcTable backendProcs = {}; |
| WGPUDevice backendDevice = nullptr; |
| |
| // Helper methods to implement the EXPECT_ macros |
| std::ostringstream& AddBufferExpectation(const char* file, |
| int line, |
| const wgpu::Buffer& buffer, |
| uint64_t offset, |
| uint64_t size, |
| detail::Expectation* expectation); |
| std::ostringstream& AddTextureExpectation(const char* file, |
| int line, |
| const wgpu::Texture& texture, |
| uint32_t x, |
| uint32_t y, |
| uint32_t width, |
| uint32_t height, |
| uint32_t level, |
| uint32_t slice, |
| uint32_t pixelSize, |
| detail::Expectation* expectation); |
| |
| void WaitABit(); |
| void FlushWire(); |
| |
| bool SupportsExtensions(const std::vector<const char*>& extensions); |
| |
| // Called in SetUp() to get the extensions required to be enabled in the tests. The tests must |
| // check if the required extensions are supported by the adapter in this function and guarantee |
| // the returned extensions are all supported by the adapter. The tests may provide different |
| // code path to handle the situation when not all extensions are supported. |
| virtual std::vector<const char*> GetRequiredExtensions(); |
| |
| const wgpu::AdapterProperties& GetAdapterProperties() const; |
| |
| private: |
| AdapterTestParam mParam; |
| |
| // Things used to set up testing through the Wire. |
| std::unique_ptr<dawn_wire::WireServer> mWireServer; |
| std::unique_ptr<dawn_wire::WireClient> mWireClient; |
| std::unique_ptr<utils::TerribleCommandBuffer> mC2sBuf; |
| std::unique_ptr<utils::TerribleCommandBuffer> mS2cBuf; |
| |
| std::unique_ptr<dawn_wire::CommandHandler> mWireServerTraceLayer; |
| |
| // Tracking for validation errors |
| static void OnDeviceError(WGPUErrorType type, const char* message, void* userdata); |
| static void OnDeviceLost(const char* message, void* userdata); |
| bool mExpectError = false; |
| bool mError = false; |
| |
| // MapRead buffers used to get data for the expectations |
| struct ReadbackSlot { |
| wgpu::Buffer buffer; |
| uint64_t bufferSize; |
| const void* mappedData = nullptr; |
| }; |
| std::vector<ReadbackSlot> mReadbackSlots; |
| |
| // Maps all the buffers and fill ReadbackSlot::mappedData |
| void MapSlotsSynchronously(); |
| static void SlotMapReadCallback(WGPUBufferMapAsyncStatus status, |
| const void* data, |
| uint64_t dataLength, |
| void* userdata); |
| size_t mNumPendingMapOperations = 0; |
| |
| // Reserve space where the data for an expectation can be copied |
| struct ReadbackReservation { |
| wgpu::Buffer buffer; |
| size_t slot; |
| uint64_t offset; |
| }; |
| ReadbackReservation ReserveReadback(uint64_t readbackSize); |
| |
| struct DeferredExpectation { |
| const char* file; |
| int line; |
| size_t readbackSlot; |
| uint64_t readbackOffset; |
| uint64_t size; |
| uint32_t rowBytes; |
| uint32_t bytesPerRow; |
| std::unique_ptr<detail::Expectation> expectation; |
| // https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54316 |
| // Use unique_ptr because of missing move/copy constructors on std::basic_ostringstream |
| std::unique_ptr<std::ostringstream> message; |
| }; |
| std::vector<DeferredExpectation> mDeferredExpectations; |
| |
| // Assuming the data is mapped, checks all expectations |
| void ResolveExpectations(); |
| |
| dawn_native::Adapter mBackendAdapter; |
| }; |
| |
| // Skip a test when the given condition is satisfied. |
| #define DAWN_SKIP_TEST_IF(condition) \ |
| do { \ |
| if (condition) { \ |
| dawn::InfoLog() << "Test skipped: " #condition "."; \ |
| GTEST_SKIP(); \ |
| return; \ |
| } \ |
| } while (0) |
| |
| template <typename Params = AdapterTestParam> |
| class DawnTestWithParams : public DawnTestBase, public ::testing::TestWithParam<Params> { |
| protected: |
| DawnTestWithParams(); |
| ~DawnTestWithParams() override = default; |
| |
| void SetUp() override { |
| DawnTestBase::SetUp(); |
| } |
| |
| void TearDown() override { |
| DawnTestBase::TearDown(); |
| } |
| }; |
| |
| template <typename Params> |
| DawnTestWithParams<Params>::DawnTestWithParams() : DawnTestBase(this->GetParam()) { |
| } |
| |
| using DawnTest = DawnTestWithParams<>; |
| |
| // Helpers to get the first element of a __VA_ARGS__ without triggering empty __VA_ARGS__ warnings. |
| #define DAWN_INTERNAL_PP_GET_HEAD(firstParam, ...) firstParam |
| #define DAWN_PP_GET_HEAD(...) DAWN_INTERNAL_PP_GET_HEAD(__VA_ARGS__, dummyArg) |
| |
| // Instantiate the test once for each backend provided after the first argument. Use it like this: |
| // DAWN_INSTANTIATE_TEST(MyTestFixture, MetalBackend, OpenGLBackend) |
| #define DAWN_INSTANTIATE_TEST(testName, ...) \ |
| const decltype(DAWN_PP_GET_HEAD(__VA_ARGS__)) testName##params[] = {__VA_ARGS__}; \ |
| INSTANTIATE_TEST_SUITE_P( \ |
| , testName, \ |
| testing::ValuesIn(::detail::GetAvailableAdapterTestParamsForBackends( \ |
| testName##params, sizeof(testName##params) / sizeof(testName##params[0]))), \ |
| testing::PrintToStringParamName()) |
| |
| namespace detail { |
| // Helper functions used for DAWN_INSTANTIATE_TEST |
| bool IsBackendAvailable(wgpu::BackendType type); |
| std::vector<AdapterTestParam> GetAvailableAdapterTestParamsForBackends( |
| const BackendTestConfig* params, |
| size_t numParams); |
| |
| // All classes used to implement the deferred expectations should inherit from this. |
| class Expectation { |
| public: |
| virtual ~Expectation() = default; |
| |
| // Will be called with the buffer or texture data the expectation should check. |
| virtual testing::AssertionResult Check(const void* data, size_t size) = 0; |
| }; |
| |
| // Expectation that checks the data is equal to some expected values. |
| template <typename T> |
| class ExpectEq : public Expectation { |
| public: |
| ExpectEq(T singleValue); |
| ExpectEq(const T* values, const unsigned int count); |
| |
| testing::AssertionResult Check(const void* data, size_t size) override; |
| |
| private: |
| std::vector<T> mExpected; |
| }; |
| extern template class ExpectEq<uint8_t>; |
| extern template class ExpectEq<int16_t>; |
| extern template class ExpectEq<uint32_t>; |
| extern template class ExpectEq<RGBA8>; |
| extern template class ExpectEq<float>; |
| } // namespace detail |
| |
| #endif // TESTS_DAWNTEST_H_ |
