| // Copyright 2017 The Dawn Authors |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "tests/DawnTest.h" |
| |
| #include "common/Assert.h" |
| #include "common/Math.h" |
| #include "utils/ComboRenderPipelineDescriptor.h" |
| #include "utils/WGPUHelpers.h" |
| |
| using wgpu::InputStepMode; |
| using wgpu::VertexFormat; |
| |
| // Input state tests all work the same way: the test will render triangles in a grid up to 4x4. Each |
| // triangle is position in the grid such that X will correspond to the "triangle number" and the Y |
| // to the instance number. Each test will set up an input state and buffers, and the vertex shader |
| // will check that the vertex attributes corresponds to predetermined values. On success it outputs |
| // green, otherwise red. |
| // |
| // The predetermined values are "K * gl_VertexID + componentIndex" for vertex-indexed buffers, and |
| // "K * gl_InstanceID + componentIndex" for instance-indexed buffers. |
| |
| constexpr static unsigned int kRTSize = 400; |
| constexpr static unsigned int kRTCellOffset = 50; |
| constexpr static unsigned int kRTCellSize = 100; |
| |
| class VertexStateTest : public DawnTest { |
| protected: |
| void SetUp() override { |
| DawnTest::SetUp(); |
| |
| renderPass = utils::CreateBasicRenderPass(device, kRTSize, kRTSize); |
| } |
| |
| bool ShouldComponentBeDefault(VertexFormat format, int component) { |
| EXPECT_TRUE(component >= 0 && component < 4); |
| switch (format) { |
| case VertexFormat::Float4: |
| case VertexFormat::UChar4Norm: |
| return component >= 4; |
| case VertexFormat::Float3: |
| return component >= 3; |
| case VertexFormat::Float2: |
| case VertexFormat::UChar2Norm: |
| return component >= 2; |
| case VertexFormat::Float: |
| return component >= 1; |
| default: |
| DAWN_UNREACHABLE(); |
| } |
| } |
| |
| struct ShaderTestSpec { |
| uint32_t location; |
| VertexFormat format; |
| InputStepMode step; |
| }; |
| wgpu::RenderPipeline MakeTestPipeline(const wgpu::VertexStateDescriptor& vertexState, |
| int multiplier, |
| const std::vector<ShaderTestSpec>& testSpec) { |
| std::ostringstream vs; |
| vs << "#version 450\n"; |
| |
| // TODO(cwallez@chromium.org): this only handles float attributes, we should extend it to |
| // other types Adds line of the form |
| // layout(location=1) in vec4 input1; |
| for (const auto& input : testSpec) { |
| vs << "layout(location=" << input.location << ") in vec4 input" << input.location |
| << ";\n"; |
| } |
| |
| vs << "layout(location = 0) out vec4 color;\n"; |
| vs << "void main() {\n"; |
| |
| // Hard code the triangle in the shader so that we don't have to add a vertex input for it. |
| // Also this places the triangle in the grid based on its VertexID and InstanceID |
| vs << " const vec2 pos[3] = vec2[3](vec2(0.5f, 1.0f), vec2(0.0f, 0.0f), vec2(1.0f, " |
| "0.0f));\n"; |
| vs << " vec2 offset = vec2(float(gl_VertexIndex / 3), float(gl_InstanceIndex));\n"; |
| vs << " vec2 worldPos = pos[gl_VertexIndex % 3] + offset;\n"; |
| vs << " vec4 position = vec4(worldPos / 2 - vec2(1.0f), 0.0f, 1.0f);\n"; |
| vs << " gl_Position = vec4(position.x, -position.y, position.z, position.w);\n"; |
| |
| // Perform the checks by successively ANDing a boolean |
| vs << " bool success = true;\n"; |
| for (const auto& input : testSpec) { |
| for (int component = 0; component < 4; ++component) { |
| vs << " success = success && (input" << input.location << "[" << component |
| << "] == "; |
| if (ShouldComponentBeDefault(input.format, component)) { |
| vs << (component == 3 ? "1.0f" : "0.0f"); |
| } else { |
| if (input.step == InputStepMode::Vertex) { |
| vs << multiplier << " * gl_VertexIndex + " << component << ".0f"; |
| } else { |
| vs << multiplier << " * gl_InstanceIndex + " << component << ".0f"; |
| } |
| } |
| vs << ");\n"; |
| } |
| } |
| |
| // Choose the color |
| vs << " if (success) {\n"; |
| vs << " color = vec4(0.0f, 1.0f, 0.0f, 1.0f);\n"; |
| vs << " } else {\n"; |
| vs << " color = vec4(1.0f, 0.0f, 0.0f, 1.0f);\n"; |
| vs << " }\n;"; |
| vs << "}\n"; |
| |
| wgpu::ShaderModule vsModule = |
| utils::CreateShaderModule(device, utils::SingleShaderStage::Vertex, vs.str().c_str()); |
| wgpu::ShaderModule fsModule = |
| utils::CreateShaderModule(device, utils::SingleShaderStage::Fragment, R"( |
| #version 450 |
| layout(location = 0) in vec4 color; |
| layout(location = 0) out vec4 fragColor; |
| void main() { |
| fragColor = color; |
| })"); |
| |
| utils::ComboRenderPipelineDescriptor descriptor(device); |
| descriptor.vertexStage.module = vsModule; |
| descriptor.cFragmentStage.module = fsModule; |
| descriptor.vertexState = &vertexState; |
| descriptor.cColorStates[0].format = renderPass.colorFormat; |
| |
| return device.CreateRenderPipeline(&descriptor); |
| } |
| |
| struct VertexAttributeSpec { |
| uint32_t location; |
| uint64_t offset; |
| VertexFormat format; |
| }; |
| struct VertexBufferSpec { |
| uint64_t arrayStride; |
| InputStepMode step; |
| std::vector<VertexAttributeSpec> attributes; |
| }; |
| |
| utils::ComboVertexStateDescriptor MakeVertexState( |
| const std::vector<VertexBufferSpec>& buffers) { |
| utils::ComboVertexStateDescriptor vertexState; |
| uint32_t vertexBufferCount = 0; |
| uint32_t totalNumAttributes = 0; |
| for (const VertexBufferSpec& buffer : buffers) { |
| vertexState.cVertexBuffers[vertexBufferCount].arrayStride = buffer.arrayStride; |
| vertexState.cVertexBuffers[vertexBufferCount].stepMode = buffer.step; |
| |
| vertexState.cVertexBuffers[vertexBufferCount].attributes = |
| &vertexState.cAttributes[totalNumAttributes]; |
| |
| for (const VertexAttributeSpec& attribute : buffer.attributes) { |
| vertexState.cAttributes[totalNumAttributes].shaderLocation = attribute.location; |
| vertexState.cAttributes[totalNumAttributes].offset = attribute.offset; |
| vertexState.cAttributes[totalNumAttributes].format = attribute.format; |
| totalNumAttributes++; |
| } |
| vertexState.cVertexBuffers[vertexBufferCount].attributeCount = |
| static_cast<uint32_t>(buffer.attributes.size()); |
| |
| vertexBufferCount++; |
| } |
| |
| vertexState.vertexBufferCount = vertexBufferCount; |
| return vertexState; |
| } |
| |
| template <typename T> |
| wgpu::Buffer MakeVertexBuffer(std::vector<T> data) { |
| return utils::CreateBufferFromData(device, data.data(), |
| static_cast<uint32_t>(data.size() * sizeof(T)), |
| wgpu::BufferUsage::Vertex); |
| } |
| |
| struct DrawVertexBuffer { |
| uint32_t location; |
| wgpu::Buffer* buffer; |
| }; |
| void DoTestDraw(const wgpu::RenderPipeline& pipeline, |
| unsigned int triangles, |
| unsigned int instances, |
| std::vector<DrawVertexBuffer> vertexBuffers) { |
| EXPECT_LE(triangles, 4u); |
| EXPECT_LE(instances, 4u); |
| |
| wgpu::CommandEncoder encoder = device.CreateCommandEncoder(); |
| |
| wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo); |
| pass.SetPipeline(pipeline); |
| |
| for (const DrawVertexBuffer& buffer : vertexBuffers) { |
| pass.SetVertexBuffer(buffer.location, *buffer.buffer); |
| } |
| |
| pass.Draw(triangles * 3, instances); |
| pass.EndPass(); |
| |
| wgpu::CommandBuffer commands = encoder.Finish(); |
| queue.Submit(1, &commands); |
| |
| CheckResult(triangles, instances); |
| } |
| |
| void CheckResult(unsigned int triangles, unsigned int instances) { |
| // Check that the center of each triangle is pure green, so that if a single vertex shader |
| // instance fails, linear interpolation makes the pixel check fail. |
| for (unsigned int triangle = 0; triangle < 4; triangle++) { |
| for (unsigned int instance = 0; instance < 4; instance++) { |
| unsigned int x = kRTCellOffset + kRTCellSize * triangle; |
| unsigned int y = kRTCellOffset + kRTCellSize * instance; |
| if (triangle < triangles && instance < instances) { |
| EXPECT_PIXEL_RGBA8_EQ(RGBA8::kGreen, renderPass.color, x, y); |
| } else { |
| EXPECT_PIXEL_RGBA8_EQ(RGBA8::kZero, renderPass.color, x, y); |
| } |
| } |
| } |
| } |
| |
| utils::BasicRenderPass renderPass; |
| }; |
| |
| // Test compilation and usage of the fixture :) |
| TEST_P(VertexStateTest, Basic) { |
| utils::ComboVertexStateDescriptor vertexState = MakeVertexState( |
| {{4 * sizeof(float), InputStepMode::Vertex, {{0, 0, VertexFormat::Float4}}}}); |
| wgpu::RenderPipeline pipeline = |
| MakeTestPipeline(vertexState, 1, {{0, VertexFormat::Float4, InputStepMode::Vertex}}); |
| |
| // clang-format off |
| wgpu::Buffer buffer0 = MakeVertexBuffer<float>({ |
| 0, 1, 2, 3, |
| 1, 2, 3, 4, |
| 2, 3, 4, 5 |
| }); |
| // clang-format on |
| DoTestDraw(pipeline, 1, 1, {DrawVertexBuffer{0, &buffer0}}); |
| } |
| |
| // Test a stride of 0 works |
| TEST_P(VertexStateTest, ZeroStride) { |
| // This test was failing only on AMD but the OpenGL backend doesn't gather PCI info yet. |
| DAWN_SKIP_TEST_IF(IsLinux() && IsOpenGL()); |
| |
| utils::ComboVertexStateDescriptor vertexState = |
| MakeVertexState({{0, InputStepMode::Vertex, {{0, 0, VertexFormat::Float4}}}}); |
| wgpu::RenderPipeline pipeline = |
| MakeTestPipeline(vertexState, 0, {{0, VertexFormat::Float4, InputStepMode::Vertex}}); |
| |
| wgpu::Buffer buffer0 = MakeVertexBuffer<float>({ |
| 0, |
| 1, |
| 2, |
| 3, |
| }); |
| DoTestDraw(pipeline, 1, 1, {DrawVertexBuffer{0, &buffer0}}); |
| } |
| |
| // Test attributes defaults to (0, 0, 0, 1) if the input state doesn't have all components |
| TEST_P(VertexStateTest, AttributeExpanding) { |
| // This test was failing only on AMD but the OpenGL backend doesn't gather PCI info yet. |
| DAWN_SKIP_TEST_IF(IsLinux() && IsOpenGL()); |
| |
| // R32F case |
| { |
| utils::ComboVertexStateDescriptor vertexState = |
| MakeVertexState({{0, InputStepMode::Vertex, {{0, 0, VertexFormat::Float}}}}); |
| wgpu::RenderPipeline pipeline = |
| MakeTestPipeline(vertexState, 0, {{0, VertexFormat::Float, InputStepMode::Vertex}}); |
| |
| wgpu::Buffer buffer0 = MakeVertexBuffer<float>({0, 1, 2, 3}); |
| DoTestDraw(pipeline, 1, 1, {DrawVertexBuffer{0, &buffer0}}); |
| } |
| // RG32F case |
| { |
| utils::ComboVertexStateDescriptor vertexState = |
| MakeVertexState({{0, InputStepMode::Vertex, {{0, 0, VertexFormat::Float2}}}}); |
| wgpu::RenderPipeline pipeline = |
| MakeTestPipeline(vertexState, 0, {{0, VertexFormat::Float2, InputStepMode::Vertex}}); |
| |
| wgpu::Buffer buffer0 = MakeVertexBuffer<float>({0, 1, 2, 3}); |
| DoTestDraw(pipeline, 1, 1, {DrawVertexBuffer{0, &buffer0}}); |
| } |
| // RGB32F case |
| { |
| utils::ComboVertexStateDescriptor vertexState = |
| MakeVertexState({{0, InputStepMode::Vertex, {{0, 0, VertexFormat::Float3}}}}); |
| wgpu::RenderPipeline pipeline = |
| MakeTestPipeline(vertexState, 0, {{0, VertexFormat::Float3, InputStepMode::Vertex}}); |
| |
| wgpu::Buffer buffer0 = MakeVertexBuffer<float>({0, 1, 2, 3}); |
| DoTestDraw(pipeline, 1, 1, {DrawVertexBuffer{0, &buffer0}}); |
| } |
| } |
| |
| // Test a stride larger than the attributes |
| TEST_P(VertexStateTest, StrideLargerThanAttributes) { |
| // This test was failing only on AMD but the OpenGL backend doesn't gather PCI info yet. |
| DAWN_SKIP_TEST_IF(IsLinux() && IsOpenGL()); |
| |
| utils::ComboVertexStateDescriptor vertexState = MakeVertexState( |
| {{8 * sizeof(float), InputStepMode::Vertex, {{0, 0, VertexFormat::Float4}}}}); |
| wgpu::RenderPipeline pipeline = |
| MakeTestPipeline(vertexState, 1, {{0, VertexFormat::Float4, InputStepMode::Vertex}}); |
| |
| // clang-format off |
| wgpu::Buffer buffer0 = MakeVertexBuffer<float>({ |
| 0, 1, 2, 3, 0, 0, 0, 0, |
| 1, 2, 3, 4, 0, 0, 0, 0, |
| 2, 3, 4, 5, 0, 0, 0, 0, |
| }); |
| // clang-format on |
| DoTestDraw(pipeline, 1, 1, {DrawVertexBuffer{0, &buffer0}}); |
| } |
| |
| // Test two attributes at an offset, vertex version |
| TEST_P(VertexStateTest, TwoAttributesAtAnOffsetVertex) { |
| utils::ComboVertexStateDescriptor vertexState = MakeVertexState( |
| {{8 * sizeof(float), |
| InputStepMode::Vertex, |
| {{0, 0, VertexFormat::Float4}, {1, 4 * sizeof(float), VertexFormat::Float4}}}}); |
| wgpu::RenderPipeline pipeline = |
| MakeTestPipeline(vertexState, 1, {{0, VertexFormat::Float4, InputStepMode::Vertex}}); |
| |
| // clang-format off |
| wgpu::Buffer buffer0 = MakeVertexBuffer<float>({ |
| 0, 1, 2, 3, 0, 1, 2, 3, |
| 1, 2, 3, 4, 1, 2, 3, 4, |
| 2, 3, 4, 5, 2, 3, 4, 5, |
| }); |
| // clang-format on |
| DoTestDraw(pipeline, 1, 1, {DrawVertexBuffer{0, &buffer0}}); |
| } |
| |
| // Test two attributes at an offset, instance version |
| TEST_P(VertexStateTest, TwoAttributesAtAnOffsetInstance) { |
| utils::ComboVertexStateDescriptor vertexState = MakeVertexState( |
| {{8 * sizeof(float), |
| InputStepMode::Instance, |
| {{0, 0, VertexFormat::Float4}, {1, 4 * sizeof(float), VertexFormat::Float4}}}}); |
| wgpu::RenderPipeline pipeline = |
| MakeTestPipeline(vertexState, 1, {{0, VertexFormat::Float4, InputStepMode::Instance}}); |
| |
| // clang-format off |
| wgpu::Buffer buffer0 = MakeVertexBuffer<float>({ |
| 0, 1, 2, 3, 0, 1, 2, 3, |
| 1, 2, 3, 4, 1, 2, 3, 4, |
| 2, 3, 4, 5, 2, 3, 4, 5, |
| }); |
| // clang-format on |
| DoTestDraw(pipeline, 1, 1, {DrawVertexBuffer{0, &buffer0}}); |
| } |
| |
| // Test a pure-instance input state |
| TEST_P(VertexStateTest, PureInstance) { |
| utils::ComboVertexStateDescriptor vertexState = MakeVertexState( |
| {{4 * sizeof(float), InputStepMode::Instance, {{0, 0, VertexFormat::Float4}}}}); |
| wgpu::RenderPipeline pipeline = |
| MakeTestPipeline(vertexState, 1, {{0, VertexFormat::Float4, InputStepMode::Instance}}); |
| |
| // clang-format off |
| wgpu::Buffer buffer0 = MakeVertexBuffer<float>({ |
| 0, 1, 2, 3, |
| 1, 2, 3, 4, |
| 2, 3, 4, 5, |
| 3, 4, 5, 6, |
| }); |
| // clang-format on |
| DoTestDraw(pipeline, 1, 4, {DrawVertexBuffer{0, &buffer0}}); |
| } |
| |
| // Test with mixed everything, vertex vs. instance, different stride and offsets |
| // different attribute types |
| TEST_P(VertexStateTest, MixedEverything) { |
| utils::ComboVertexStateDescriptor vertexState = MakeVertexState( |
| {{12 * sizeof(float), |
| InputStepMode::Vertex, |
| {{0, 0, VertexFormat::Float}, {1, 6 * sizeof(float), VertexFormat::Float2}}}, |
| {10 * sizeof(float), |
| InputStepMode::Instance, |
| {{2, 0, VertexFormat::Float3}, {3, 5 * sizeof(float), VertexFormat::Float4}}}}); |
| wgpu::RenderPipeline pipeline = |
| MakeTestPipeline(vertexState, 1, |
| {{0, VertexFormat::Float, InputStepMode::Vertex}, |
| {1, VertexFormat::Float2, InputStepMode::Vertex}, |
| {2, VertexFormat::Float3, InputStepMode::Instance}, |
| {3, VertexFormat::Float4, InputStepMode::Instance}}); |
| |
| // clang-format off |
| wgpu::Buffer buffer0 = MakeVertexBuffer<float>({ |
| 0, 1, 2, 3, 0, 0, 0, 1, 2, 3, 0, 0, |
| 1, 2, 3, 4, 0, 0, 1, 2, 3, 4, 0, 0, |
| 2, 3, 4, 5, 0, 0, 2, 3, 4, 5, 0, 0, |
| 3, 4, 5, 6, 0, 0, 3, 4, 5, 6, 0, 0, |
| }); |
| wgpu::Buffer buffer1 = MakeVertexBuffer<float>({ |
| 0, 1, 2, 3, 0, 0, 1, 2, 3, 0, |
| 1, 2, 3, 4, 0, 1, 2, 3, 4, 0, |
| 2, 3, 4, 5, 0, 2, 3, 4, 5, 0, |
| 3, 4, 5, 6, 0, 3, 4, 5, 6, 0, |
| }); |
| // clang-format on |
| DoTestDraw(pipeline, 1, 1, {{0, &buffer0}, {1, &buffer1}}); |
| } |
| |
| // Test input state is unaffected by unused vertex slot |
| TEST_P(VertexStateTest, UnusedVertexSlot) { |
| // Instance input state, using slot 1 |
| utils::ComboVertexStateDescriptor instanceVertexState = MakeVertexState( |
| {{0, InputStepMode::Vertex, {}}, |
| {4 * sizeof(float), InputStepMode::Instance, {{0, 0, VertexFormat::Float4}}}}); |
| wgpu::RenderPipeline instancePipeline = MakeTestPipeline( |
| instanceVertexState, 1, {{0, VertexFormat::Float4, InputStepMode::Instance}}); |
| |
| // clang-format off |
| wgpu::Buffer buffer = MakeVertexBuffer<float>({ |
| 0, 1, 2, 3, |
| 1, 2, 3, 4, |
| 2, 3, 4, 5, |
| 3, 4, 5, 6, |
| }); |
| // clang-format on |
| |
| wgpu::CommandEncoder encoder = device.CreateCommandEncoder(); |
| |
| wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo); |
| |
| pass.SetVertexBuffer(0, buffer); |
| pass.SetVertexBuffer(1, buffer); |
| |
| pass.SetPipeline(instancePipeline); |
| pass.Draw(3, 4); |
| |
| pass.EndPass(); |
| |
| wgpu::CommandBuffer commands = encoder.Finish(); |
| queue.Submit(1, &commands); |
| |
| CheckResult(1, 4); |
| } |
| |
| // Test setting a different pipeline with a different input state. |
| // This was a problem with the D3D12 backend where SetVertexBuffer |
| // was getting the input from the last set pipeline, not the current. |
| // SetVertexBuffer should be reapplied when the input state changes. |
| TEST_P(VertexStateTest, MultiplePipelinesMixedVertexState) { |
| // Basic input state, using slot 0 |
| utils::ComboVertexStateDescriptor vertexVertexState = MakeVertexState( |
| {{4 * sizeof(float), InputStepMode::Vertex, {{0, 0, VertexFormat::Float4}}}}); |
| wgpu::RenderPipeline vertexPipeline = |
| MakeTestPipeline(vertexVertexState, 1, {{0, VertexFormat::Float4, InputStepMode::Vertex}}); |
| |
| // Instance input state, using slot 1 |
| utils::ComboVertexStateDescriptor instanceVertexState = MakeVertexState( |
| {{0, InputStepMode::Instance, {}}, |
| {4 * sizeof(float), InputStepMode::Instance, {{0, 0, VertexFormat::Float4}}}}); |
| wgpu::RenderPipeline instancePipeline = MakeTestPipeline( |
| instanceVertexState, 1, {{0, VertexFormat::Float4, InputStepMode::Instance}}); |
| |
| // clang-format off |
| wgpu::Buffer buffer = MakeVertexBuffer<float>({ |
| 0, 1, 2, 3, |
| 1, 2, 3, 4, |
| 2, 3, 4, 5, |
| 3, 4, 5, 6, |
| }); |
| // clang-format on |
| |
| wgpu::CommandEncoder encoder = device.CreateCommandEncoder(); |
| |
| wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo); |
| |
| pass.SetVertexBuffer(0, buffer); |
| pass.SetVertexBuffer(1, buffer); |
| |
| pass.SetPipeline(vertexPipeline); |
| pass.Draw(3); |
| |
| pass.SetPipeline(instancePipeline); |
| pass.Draw(3, 4); |
| |
| pass.EndPass(); |
| |
| wgpu::CommandBuffer commands = encoder.Finish(); |
| queue.Submit(1, &commands); |
| |
| CheckResult(1, 4); |
| } |
| |
| // Checks that using the last vertex buffer doesn't overflow the vertex buffer table in Metal. |
| TEST_P(VertexStateTest, LastAllowedVertexBuffer) { |
| constexpr uint32_t kBufferIndex = kMaxVertexBuffers - 1; |
| |
| utils::ComboVertexStateDescriptor vertexState; |
| // All the other vertex buffers default to no attributes |
| vertexState.vertexBufferCount = kMaxVertexBuffers; |
| vertexState.cVertexBuffers[kBufferIndex].arrayStride = 4 * sizeof(float); |
| vertexState.cVertexBuffers[kBufferIndex].stepMode = InputStepMode::Vertex; |
| vertexState.cVertexBuffers[kBufferIndex].attributeCount = 1; |
| vertexState.cVertexBuffers[kBufferIndex].attributes = &vertexState.cAttributes[0]; |
| vertexState.cAttributes[0].shaderLocation = 0; |
| vertexState.cAttributes[0].offset = 0; |
| vertexState.cAttributes[0].format = VertexFormat::Float4; |
| |
| wgpu::RenderPipeline pipeline = |
| MakeTestPipeline(vertexState, 1, {{0, VertexFormat::Float4, InputStepMode::Vertex}}); |
| |
| wgpu::Buffer buffer0 = MakeVertexBuffer<float>({0, 1, 2, 3, 1, 2, 3, 4, 2, 3, 4, 5}); |
| DoTestDraw(pipeline, 1, 1, {DrawVertexBuffer{kMaxVertexBuffers - 1, &buffer0}}); |
| } |
| |
| // Test that overlapping vertex attributes are permitted and load data correctly |
| TEST_P(VertexStateTest, OverlappingVertexAttributes) { |
| utils::BasicRenderPass renderPass = utils::CreateBasicRenderPass(device, 3, 3); |
| |
| utils::ComboVertexStateDescriptor vertexState = |
| MakeVertexState({{16, |
| InputStepMode::Vertex, |
| { |
| // "****" represents the bytes we'll actually read in the shader. |
| {0, 0 /* offset */, VertexFormat::Float4}, // |****|----|----|----| |
| {1, 4 /* offset */, VertexFormat::UInt2}, // |****|****| |
| {2, 8 /* offset */, VertexFormat::Half4}, // |-----****| |
| {3, 0 /* offset */, VertexFormat::Float}, // |****| |
| }}}); |
| |
| struct Data { |
| float fvalue; |
| uint32_t uints[2]; |
| uint16_t halfs[2]; |
| }; |
| static_assert(sizeof(Data) == 16, ""); |
| Data data {1.f, {2u, 3u}, {Float32ToFloat16(4.f), Float32ToFloat16(5.f)}}; |
| |
| wgpu::Buffer vertexBuffer = |
| utils::CreateBufferFromData(device, &data, sizeof(data), wgpu::BufferUsage::Vertex); |
| |
| utils::ComboRenderPipelineDescriptor pipelineDesc(device); |
| pipelineDesc.vertexStage.module = |
| utils::CreateShaderModule(device, utils::SingleShaderStage::Vertex, R"( |
| #version 450 |
| layout(location = 0) in vec4 attr0; |
| layout(location = 1) in uvec2 attr1; |
| layout(location = 2) in vec4 attr2; |
| layout(location = 3) in float attr3; |
| |
| layout(location = 0) out vec4 color; |
| |
| void main() { |
| gl_Position = vec4(0.0, 0.0, 0.0, 1.0); |
| gl_PointSize = 1.0; |
| |
| bool success = ( |
| attr0.x == 1.0f && |
| attr1.x == 2u && |
| attr1.y == 3u && |
| attr2.z == 4.0f && |
| attr2.w == 5.0f && |
| attr3 == 1.0f |
| ); |
| color = success ? vec4(0.0, 1.0, 0.0, 1.0) : vec4(1.0, 0.0, 0.0, 1.0); |
| })"); |
| pipelineDesc.cFragmentStage.module = |
| utils::CreateShaderModule(device, utils::SingleShaderStage::Fragment, R"( |
| #version 450 |
| layout(location = 0) in vec4 color; |
| layout(location = 0) out vec4 fragColor; |
| void main() { |
| fragColor = color; |
| })"); |
| pipelineDesc.vertexState = &vertexState; |
| pipelineDesc.cColorStates[0].format = renderPass.colorFormat; |
| pipelineDesc.primitiveTopology = wgpu::PrimitiveTopology::PointList; |
| |
| wgpu::RenderPipeline pipeline = device.CreateRenderPipeline(&pipelineDesc); |
| |
| wgpu::CommandEncoder encoder = device.CreateCommandEncoder(); |
| wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo); |
| pass.SetPipeline(pipeline); |
| pass.SetVertexBuffer(0, vertexBuffer); |
| pass.Draw(1); |
| pass.EndPass(); |
| wgpu::CommandBuffer commands = encoder.Finish(); |
| queue.Submit(1, &commands); |
| |
| EXPECT_PIXEL_RGBA8_EQ(RGBA8::kGreen, renderPass.color, 1, 1); |
| } |
| |
| DAWN_INSTANTIATE_TEST(VertexStateTest, D3D12Backend(), MetalBackend(), OpenGLBackend(), VulkanBackend()); |
| |
| // TODO for the input state: |
| // - Add more vertex formats |
| // - Add checks that the stride is enough to contain all attributes |
| // - Add checks stride less than some limit |
| // - Add checks for alignement of vertex buffers and attributes if needed |
| // - Check for attribute narrowing |
| // - Check that the input state and the pipeline vertex input types match |
| |
| class OptionalVertexStateTest : public DawnTest {}; |
| |
| // Test that vertex input is not required in render pipeline descriptor. |
| TEST_P(OptionalVertexStateTest, Basic) { |
| utils::BasicRenderPass renderPass = utils::CreateBasicRenderPass(device, 3, 3); |
| |
| wgpu::ShaderModule vsModule = |
| utils::CreateShaderModule(device, utils::SingleShaderStage::Vertex, R"( |
| #version 450 |
| void main() { |
| gl_Position = vec4(0.0f, 0.0f, 0.0f, 1.0f); |
| gl_PointSize = 1.0; |
| })"); |
| |
| wgpu::ShaderModule fsModule = |
| utils::CreateShaderModule(device, utils::SingleShaderStage::Fragment, R"( |
| #version 450 |
| layout(location = 0) out vec4 fragColor; |
| void main() { |
| fragColor = vec4(0.0f, 1.0f, 0.0f, 1.0f); |
| })"); |
| |
| utils::ComboRenderPipelineDescriptor descriptor(device); |
| descriptor.vertexStage.module = vsModule; |
| descriptor.cFragmentStage.module = fsModule; |
| descriptor.primitiveTopology = wgpu::PrimitiveTopology::PointList; |
| descriptor.vertexState = nullptr; |
| |
| wgpu::RenderPipeline pipeline = device.CreateRenderPipeline(&descriptor); |
| |
| wgpu::CommandEncoder encoder = device.CreateCommandEncoder(); |
| { |
| wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo); |
| pass.SetPipeline(pipeline); |
| pass.Draw(1); |
| pass.EndPass(); |
| } |
| |
| wgpu::CommandBuffer commands = encoder.Finish(); |
| queue.Submit(1, &commands); |
| |
| EXPECT_PIXEL_RGBA8_EQ(RGBA8::kGreen, renderPass.color, 1, 1); |
| } |
| |
| DAWN_INSTANTIATE_TEST(OptionalVertexStateTest, |
| D3D12Backend(), |
| MetalBackend(), |
| OpenGLBackend(), |
| VulkanBackend()); |
