| // Copyright 2020 The Tint Authors. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "src/tint/resolver/validator.h" |
| |
| #include <algorithm> |
| #include <limits> |
| #include <utility> |
| |
| #include "src/tint/ast/alias.h" |
| #include "src/tint/ast/array.h" |
| #include "src/tint/ast/assignment_statement.h" |
| #include "src/tint/ast/bitcast_expression.h" |
| #include "src/tint/ast/break_statement.h" |
| #include "src/tint/ast/call_statement.h" |
| #include "src/tint/ast/continue_statement.h" |
| #include "src/tint/ast/depth_texture.h" |
| #include "src/tint/ast/disable_validation_attribute.h" |
| #include "src/tint/ast/discard_statement.h" |
| #include "src/tint/ast/for_loop_statement.h" |
| #include "src/tint/ast/id_attribute.h" |
| #include "src/tint/ast/if_statement.h" |
| #include "src/tint/ast/internal_attribute.h" |
| #include "src/tint/ast/interpolate_attribute.h" |
| #include "src/tint/ast/loop_statement.h" |
| #include "src/tint/ast/matrix.h" |
| #include "src/tint/ast/pointer.h" |
| #include "src/tint/ast/return_statement.h" |
| #include "src/tint/ast/sampled_texture.h" |
| #include "src/tint/ast/sampler.h" |
| #include "src/tint/ast/storage_texture.h" |
| #include "src/tint/ast/switch_statement.h" |
| #include "src/tint/ast/traverse_expressions.h" |
| #include "src/tint/ast/type_name.h" |
| #include "src/tint/ast/unary_op_expression.h" |
| #include "src/tint/ast/variable_decl_statement.h" |
| #include "src/tint/ast/vector.h" |
| #include "src/tint/ast/workgroup_attribute.h" |
| #include "src/tint/sem/array.h" |
| #include "src/tint/sem/atomic.h" |
| #include "src/tint/sem/break_if_statement.h" |
| #include "src/tint/sem/call.h" |
| #include "src/tint/sem/for_loop_statement.h" |
| #include "src/tint/sem/function.h" |
| #include "src/tint/sem/if_statement.h" |
| #include "src/tint/sem/loop_statement.h" |
| #include "src/tint/sem/materialize.h" |
| #include "src/tint/sem/member_accessor_expression.h" |
| #include "src/tint/sem/pointer.h" |
| #include "src/tint/sem/reference.h" |
| #include "src/tint/sem/statement.h" |
| #include "src/tint/sem/struct.h" |
| #include "src/tint/sem/switch_statement.h" |
| #include "src/tint/sem/type_conversion.h" |
| #include "src/tint/sem/type_initializer.h" |
| #include "src/tint/sem/variable.h" |
| #include "src/tint/sem/while_statement.h" |
| #include "src/tint/type/abstract_numeric.h" |
| #include "src/tint/type/depth_multisampled_texture.h" |
| #include "src/tint/type/depth_texture.h" |
| #include "src/tint/type/multisampled_texture.h" |
| #include "src/tint/type/sampled_texture.h" |
| #include "src/tint/type/sampler.h" |
| #include "src/tint/type/storage_texture.h" |
| #include "src/tint/utils/defer.h" |
| #include "src/tint/utils/map.h" |
| #include "src/tint/utils/math.h" |
| #include "src/tint/utils/reverse.h" |
| #include "src/tint/utils/scoped_assignment.h" |
| #include "src/tint/utils/string.h" |
| #include "src/tint/utils/transform.h" |
| |
| namespace tint::resolver { |
| namespace { |
| |
| bool IsValidStorageTextureDimension(ast::TextureDimension dim) { |
| switch (dim) { |
| case ast::TextureDimension::k1d: |
| case ast::TextureDimension::k2d: |
| case ast::TextureDimension::k2dArray: |
| case ast::TextureDimension::k3d: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| bool IsValidStorageTextureTexelFormat(ast::TexelFormat format) { |
| switch (format) { |
| case ast::TexelFormat::kR32Uint: |
| case ast::TexelFormat::kR32Sint: |
| case ast::TexelFormat::kR32Float: |
| case ast::TexelFormat::kRg32Uint: |
| case ast::TexelFormat::kRg32Sint: |
| case ast::TexelFormat::kRg32Float: |
| case ast::TexelFormat::kRgba8Unorm: |
| case ast::TexelFormat::kRgba8Snorm: |
| case ast::TexelFormat::kRgba8Uint: |
| case ast::TexelFormat::kRgba8Sint: |
| case ast::TexelFormat::kRgba16Uint: |
| case ast::TexelFormat::kRgba16Sint: |
| case ast::TexelFormat::kRgba16Float: |
| case ast::TexelFormat::kRgba32Uint: |
| case ast::TexelFormat::kRgba32Sint: |
| case ast::TexelFormat::kRgba32Float: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| // Helper to stringify a pipeline IO attribute. |
| std::string attr_to_str(const ast::Attribute* attr, |
| std::optional<uint32_t> location = std::nullopt) { |
| std::stringstream str; |
| if (auto* builtin = attr->As<ast::BuiltinAttribute>()) { |
| str << "builtin(" << builtin->builtin << ")"; |
| } else if (attr->Is<ast::LocationAttribute>()) { |
| str << "location(" << location.value() << ")"; |
| } |
| return str.str(); |
| } |
| |
| template <typename CALLBACK> |
| void TraverseCallChain(diag::List& diagnostics, |
| const sem::Function* from, |
| const sem::Function* to, |
| CALLBACK&& callback) { |
| for (auto* f : from->TransitivelyCalledFunctions()) { |
| if (f == to) { |
| callback(f); |
| return; |
| } |
| if (f->TransitivelyCalledFunctions().Contains(to)) { |
| TraverseCallChain(diagnostics, f, to, callback); |
| callback(f); |
| return; |
| } |
| } |
| TINT_ICE(Resolver, diagnostics) << "TraverseCallChain() 'from' does not transitively call 'to'"; |
| } |
| |
| } // namespace |
| |
| Validator::Validator( |
| ProgramBuilder* builder, |
| SemHelper& sem, |
| const ast::Extensions& enabled_extensions, |
| const utils::Hashmap<const type::Type*, const Source*, 8>& atomic_composite_info, |
| utils::Hashset<TypeAndAddressSpace, 8>& valid_type_storage_layouts) |
| : symbols_(builder->Symbols()), |
| diagnostics_(builder->Diagnostics()), |
| sem_(sem), |
| enabled_extensions_(enabled_extensions), |
| atomic_composite_info_(atomic_composite_info), |
| valid_type_storage_layouts_(valid_type_storage_layouts) {} |
| |
| Validator::~Validator() = default; |
| |
| void Validator::AddError(const std::string& msg, const Source& source) const { |
| diagnostics_.add_error(diag::System::Resolver, msg, source); |
| } |
| |
| void Validator::AddWarning(const std::string& msg, const Source& source) const { |
| diagnostics_.add_warning(diag::System::Resolver, msg, source); |
| } |
| |
| void Validator::AddNote(const std::string& msg, const Source& source) const { |
| diagnostics_.add_note(diag::System::Resolver, msg, source); |
| } |
| |
| // https://gpuweb.github.io/gpuweb/wgsl/#plain-types-section |
| bool Validator::IsPlain(const type::Type* type) const { |
| return type->is_scalar() || |
| type->IsAnyOf<sem::Atomic, sem::Vector, sem::Matrix, sem::Array, sem::Struct>(); |
| } |
| |
| // https://gpuweb.github.io/gpuweb/wgsl/#fixed-footprint-types |
| bool Validator::IsFixedFootprint(const type::Type* type) const { |
| return Switch( |
| type, // |
| [&](const sem::Vector*) { return true; }, // |
| [&](const sem::Matrix*) { return true; }, // |
| [&](const sem::Atomic*) { return true; }, |
| [&](const sem::Array* arr) { |
| return !arr->Count()->Is<type::RuntimeArrayCount>() && |
| IsFixedFootprint(arr->ElemType()); |
| }, |
| [&](const sem::Struct* str) { |
| for (auto* member : str->Members()) { |
| if (!IsFixedFootprint(member->Type())) { |
| return false; |
| } |
| } |
| return true; |
| }, |
| [&](Default) { return type->is_scalar(); }); |
| } |
| |
| // https://gpuweb.github.io/gpuweb/wgsl.html#host-shareable-types |
| bool Validator::IsHostShareable(const type::Type* type) const { |
| if (type->IsAnyOf<sem::I32, sem::U32, sem::F32, sem::F16>()) { |
| return true; |
| } |
| return Switch( |
| type, // |
| [&](const sem::Vector* vec) { return IsHostShareable(vec->type()); }, |
| [&](const sem::Matrix* mat) { return IsHostShareable(mat->type()); }, |
| [&](const sem::Array* arr) { return IsHostShareable(arr->ElemType()); }, |
| [&](const sem::Struct* str) { |
| for (auto* member : str->Members()) { |
| if (!IsHostShareable(member->Type())) { |
| return false; |
| } |
| } |
| return true; |
| }, |
| [&](const sem::Atomic* atomic) { return IsHostShareable(atomic->Type()); }); |
| } |
| |
| // https://gpuweb.github.io/gpuweb/wgsl.html#storable-types |
| bool Validator::IsStorable(const type::Type* type) const { |
| return IsPlain(type) || type->IsAnyOf<type::Texture, type::Sampler>(); |
| } |
| |
| const ast::Statement* Validator::ClosestContinuing(bool stop_at_loop, |
| sem::Statement* current_statement) const { |
| for (const auto* s = current_statement; s != nullptr; s = s->Parent()) { |
| if (stop_at_loop && s->Is<sem::LoopStatement>()) { |
| break; |
| } |
| if (s->Is<sem::LoopContinuingBlockStatement>()) { |
| return s->Declaration(); |
| } |
| if (auto* f = As<sem::ForLoopStatement>(s->Parent())) { |
| if (f->Declaration()->continuing == s->Declaration()) { |
| return s->Declaration(); |
| } |
| if (stop_at_loop) { |
| break; |
| } |
| } |
| if (Is<sem::WhileStatement>(s->Parent())) { |
| if (stop_at_loop) { |
| break; |
| } |
| } |
| } |
| return nullptr; |
| } |
| |
| bool Validator::Atomic(const ast::Atomic* a, const sem::Atomic* s) const { |
| // https://gpuweb.github.io/gpuweb/wgsl/#atomic-types |
| // T must be either u32 or i32. |
| if (!s->Type()->IsAnyOf<sem::U32, sem::I32>()) { |
| AddError("atomic only supports i32 or u32 types", a->type ? a->type->source : a->source); |
| return false; |
| } |
| return true; |
| } |
| |
| bool Validator::Pointer(const ast::Pointer* a, const sem::Pointer* s) const { |
| if (s->AddressSpace() == ast::AddressSpace::kUndefined) { |
| AddError("ptr missing address space", a->source); |
| return false; |
| } |
| |
| if (a->access != ast::Access::kUndefined) { |
| // https://www.w3.org/TR/WGSL/#access-mode-defaults |
| // When writing a variable declaration or a pointer type in WGSL source: |
| // * For the storage address space, the access mode is optional, and defaults to read. |
| // * For other address spaces, the access mode must not be written. |
| if (a->address_space != ast::AddressSpace::kStorage) { |
| AddError("only pointers in <storage> address space may declare an access mode", |
| a->source); |
| return false; |
| } |
| } |
| |
| return CheckTypeAccessAddressSpace(s->StoreType(), s->Access(), s->AddressSpace(), utils::Empty, |
| a->source); |
| } |
| |
| bool Validator::StorageTexture(const ast::StorageTexture* t) const { |
| switch (t->access) { |
| case ast::Access::kWrite: |
| break; |
| case ast::Access::kUndefined: |
| AddError("storage texture missing access control", t->source); |
| return false; |
| default: |
| AddError("storage textures currently only support 'write' access control", t->source); |
| return false; |
| } |
| |
| if (!IsValidStorageTextureDimension(t->dim)) { |
| AddError("cube dimensions for storage textures are not supported", t->source); |
| return false; |
| } |
| |
| if (!IsValidStorageTextureTexelFormat(t->format)) { |
| AddError( |
| "image format must be one of the texel formats specified for storage " |
| "textues in https://gpuweb.github.io/gpuweb/wgsl/#texel-formats", |
| t->source); |
| return false; |
| } |
| return true; |
| } |
| |
| bool Validator::SampledTexture(const type::SampledTexture* t, const Source& source) const { |
| if (!t->type()->UnwrapRef()->IsAnyOf<sem::F32, sem::I32, sem::U32>()) { |
| AddError("texture_2d<type>: type must be f32, i32 or u32", source); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool Validator::MultisampledTexture(const type::MultisampledTexture* t, |
| const Source& source) const { |
| if (t->dim() != ast::TextureDimension::k2d) { |
| AddError("only 2d multisampled textures are supported", source); |
| return false; |
| } |
| |
| if (!t->type()->UnwrapRef()->IsAnyOf<sem::F32, sem::I32, sem::U32>()) { |
| AddError("texture_multisampled_2d<type>: type must be f32, i32 or u32", source); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool Validator::Materialize(const type::Type* to, |
| const type::Type* from, |
| const Source& source) const { |
| if (type::Type::ConversionRank(from, to) == type::Type::kNoConversion) { |
| AddError("cannot convert value of type '" + sem_.TypeNameOf(from) + "' to type '" + |
| sem_.TypeNameOf(to) + "'", |
| source); |
| return false; |
| } |
| return true; |
| } |
| |
| bool Validator::VariableInitializer(const ast::Variable* v, |
| ast::AddressSpace address_space, |
| const type::Type* storage_ty, |
| const sem::Expression* initializer) const { |
| auto* initializer_ty = initializer->Type(); |
| auto* value_type = initializer_ty->UnwrapRef(); // Implicit load of RHS |
| |
| // Value type has to match storage type |
| if (storage_ty != value_type) { |
| std::stringstream s; |
| s << "cannot initialize " << v->Kind() << " of type '" << sem_.TypeNameOf(storage_ty) |
| << "' with value of type '" << sem_.TypeNameOf(initializer_ty) << "'"; |
| AddError(s.str(), v->source); |
| return false; |
| } |
| |
| if (v->Is<ast::Var>()) { |
| switch (address_space) { |
| case ast::AddressSpace::kPrivate: |
| case ast::AddressSpace::kFunction: |
| break; // Allowed an initializer |
| default: |
| // https://gpuweb.github.io/gpuweb/wgsl/#var-and-let |
| // Optionally has an initializer expression, if the variable is in the private or |
| // function address spaces. |
| AddError("var of address space '" + utils::ToString(address_space) + |
| "' cannot have an initializer. var initializers are only supported " |
| "for the address spaces 'private' and 'function'", |
| v->source); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| bool Validator::AddressSpaceLayout(const type::Type* store_ty, |
| ast::AddressSpace address_space, |
| Source source) const { |
| // https://gpuweb.github.io/gpuweb/wgsl/#storage-class-layout-constraints |
| |
| auto is_uniform_struct_or_array = [address_space](const type::Type* ty) { |
| return address_space == ast::AddressSpace::kUniform && |
| ty->IsAnyOf<sem::Array, sem::Struct>(); |
| }; |
| |
| auto is_uniform_struct = [address_space](const type::Type* ty) { |
| return address_space == ast::AddressSpace::kUniform && ty->Is<sem::Struct>(); |
| }; |
| |
| auto required_alignment_of = [&](const type::Type* ty) { |
| uint32_t actual_align = ty->Align(); |
| uint32_t required_align = actual_align; |
| if (is_uniform_struct_or_array(ty)) { |
| required_align = utils::RoundUp(16u, actual_align); |
| } |
| return required_align; |
| }; |
| |
| auto member_name_of = [this](const sem::StructMember* sm) { |
| return symbols_.NameFor(sm->Name()); |
| }; |
| |
| // Only validate the [type + address space] once |
| if (!valid_type_storage_layouts_.Add(TypeAndAddressSpace{store_ty, address_space})) { |
| return true; |
| } |
| |
| if (!ast::IsHostShareable(address_space)) { |
| return true; |
| } |
| |
| auto note_usage = [&] { |
| AddNote("'" + store_ty->FriendlyName(symbols_) + "' used in address space '" + |
| utils::ToString(address_space) + "' here", |
| source); |
| }; |
| |
| // Among three host-shareable address spaces, f16 is supported in "uniform" and |
| // "storage" address space, but not "push_constant" address space yet. |
| if (Is<sem::F16>(type::Type::DeepestElementOf(store_ty)) && |
| address_space == ast::AddressSpace::kPushConstant) { |
| AddError("using f16 types in 'push_constant' address space is not implemented yet", source); |
| return false; |
| } |
| |
| if (auto* str = store_ty->As<sem::Struct>()) { |
| for (size_t i = 0; i < str->Members().Length(); ++i) { |
| auto* const m = str->Members()[i]; |
| uint32_t required_align = required_alignment_of(m->Type()); |
| |
| // Recurse into the member type. |
| if (!AddressSpaceLayout(m->Type(), address_space, m->Declaration()->type->source)) { |
| AddNote("see layout of struct:\n" + str->Layout(symbols_), str->Source()); |
| note_usage(); |
| return false; |
| } |
| |
| // Validate that member is at a valid byte offset |
| if (m->Offset() % required_align != 0) { |
| AddError("the offset of a struct member of type '" + |
| m->Type()->UnwrapRef()->FriendlyName(symbols_) + |
| "' in address space '" + utils::ToString(address_space) + |
| "' must be a multiple of " + std::to_string(required_align) + |
| " bytes, but '" + member_name_of(m) + "' is currently at offset " + |
| std::to_string(m->Offset()) + ". Consider setting @align(" + |
| std::to_string(required_align) + ") on this member", |
| m->Source()); |
| |
| AddNote("see layout of struct:\n" + str->Layout(symbols_), str->Source()); |
| |
| if (auto* member_str = m->Type()->As<sem::Struct>()) { |
| AddNote("and layout of struct member:\n" + member_str->Layout(symbols_), |
| member_str->Source()); |
| } |
| |
| note_usage(); |
| return false; |
| } |
| |
| // For uniform buffers, validate that the number of bytes between the previous member of |
| // type struct and the current is a multiple of 16 bytes. |
| auto* const prev_member = (i == 0) ? nullptr : str->Members()[i - 1]; |
| if (prev_member && is_uniform_struct(prev_member->Type())) { |
| const uint32_t prev_to_curr_offset = m->Offset() - prev_member->Offset(); |
| if (prev_to_curr_offset % 16 != 0) { |
| AddError( |
| "uniform storage requires that the number of bytes between the " |
| "start of the previous member of type struct and the current " |
| "member be a multiple of 16 bytes, but there are currently " + |
| std::to_string(prev_to_curr_offset) + " bytes between '" + |
| member_name_of(prev_member) + "' and '" + member_name_of(m) + |
| "'. Consider setting @align(16) on this member", |
| m->Source()); |
| |
| AddNote("see layout of struct:\n" + str->Layout(symbols_), str->Source()); |
| |
| auto* prev_member_str = prev_member->Type()->As<sem::Struct>(); |
| AddNote("and layout of previous member struct:\n" + |
| prev_member_str->Layout(symbols_), |
| prev_member_str->Source()); |
| note_usage(); |
| return false; |
| } |
| } |
| } |
| } |
| |
| // For uniform buffer array members, validate that array elements are aligned to 16 bytes |
| if (auto* arr = store_ty->As<sem::Array>()) { |
| // Recurse into the element type. |
| // TODO(crbug.com/tint/1388): Ideally we'd pass the source for nested element type here, but |
| // we can't easily get that from the semantic node. We should consider recursing through the |
| // AST type nodes instead. |
| if (!AddressSpaceLayout(arr->ElemType(), address_space, source)) { |
| return false; |
| } |
| |
| if (address_space == ast::AddressSpace::kUniform) { |
| // We already validated that this array member is itself aligned to 16 bytes above, so |
| // we only need to validate that stride is a multiple of 16 bytes. |
| if (arr->Stride() % 16 != 0) { |
| // Since WGSL has no stride attribute, try to provide a useful hint for how the |
| // shader author can resolve the issue. |
| std::string hint; |
| if (arr->ElemType()->is_scalar()) { |
| hint = "Consider using a vector or struct as the element type instead."; |
| } else if (auto* vec = arr->ElemType()->As<sem::Vector>(); |
| vec && vec->type()->Size() == 4) { |
| hint = "Consider using a vec4 instead."; |
| } else if (arr->ElemType()->Is<sem::Struct>()) { |
| hint = "Consider using the @size attribute on the last struct member."; |
| } else { |
| hint = |
| "Consider wrapping the element type in a struct and using the @size " |
| "attribute."; |
| } |
| AddError( |
| "uniform storage requires that array elements be aligned to 16 " |
| "bytes, but array element alignment is currently " + |
| std::to_string(arr->Stride()) + ". " + hint, |
| source); |
| return false; |
| } |
| } |
| } |
| |
| return true; |
| } |
| |
| bool Validator::LocalVariable(const sem::Variable* local) const { |
| auto* decl = local->Declaration(); |
| if (IsArrayWithOverrideCount(local->Type())) { |
| RaiseArrayWithOverrideCountError(decl->type ? decl->type->source |
| : decl->initializer->source); |
| return false; |
| } |
| return Switch( |
| decl, // |
| [&](const ast::Var* var) { |
| if (IsValidationEnabled(var->attributes, |
| ast::DisabledValidation::kIgnoreAddressSpace)) { |
| if (!local->Type()->UnwrapRef()->IsConstructible()) { |
| AddError("function-scope 'var' must have a constructible type", |
| var->type ? var->type->source : var->source); |
| return false; |
| } |
| } |
| return Var(local); |
| }, // |
| [&](const ast::Let*) { return Let(local); }, // |
| [&](const ast::Const*) { return true; }, // |
| [&](Default) { |
| TINT_ICE(Resolver, diagnostics_) |
| << "Validator::Variable() called with a unknown variable type: " |
| << decl->TypeInfo().name; |
| return false; |
| }); |
| } |
| |
| bool Validator::GlobalVariable( |
| const sem::GlobalVariable* global, |
| const utils::Hashmap<OverrideId, const sem::Variable*, 8>& override_ids) const { |
| auto* decl = global->Declaration(); |
| if (global->AddressSpace() != ast::AddressSpace::kWorkgroup && |
| IsArrayWithOverrideCount(global->Type())) { |
| RaiseArrayWithOverrideCountError(decl->type ? decl->type->source |
| : decl->initializer->source); |
| return false; |
| } |
| bool ok = Switch( |
| decl, // |
| [&](const ast::Var*) { |
| if (auto* init = global->Initializer(); |
| init && init->Stage() > sem::EvaluationStage::kOverride) { |
| AddError("module-scope 'var' initializer must be a constant or override-expression", |
| init->Declaration()->source); |
| return false; |
| } |
| |
| if (global->AddressSpace() == ast::AddressSpace::kNone) { |
| AddError("module-scope 'var' declaration must have a address space", decl->source); |
| return false; |
| } |
| |
| for (auto* attr : decl->attributes) { |
| bool is_shader_io_attribute = |
| attr->IsAnyOf<ast::BuiltinAttribute, ast::InterpolateAttribute, |
| ast::InvariantAttribute, ast::LocationAttribute>(); |
| bool has_io_address_space = global->AddressSpace() == ast::AddressSpace::kIn || |
| global->AddressSpace() == ast::AddressSpace::kOut; |
| if (!attr->IsAnyOf<ast::BindingAttribute, ast::GroupAttribute, |
| ast::InternalAttribute>() && |
| (!is_shader_io_attribute || !has_io_address_space)) { |
| AddError("attribute '" + attr->Name() + "' is not valid for module-scope 'var'", |
| attr->source); |
| return false; |
| } |
| } |
| |
| return Var(global); |
| }, |
| [&](const ast::Override*) { return Override(global, override_ids); }, |
| [&](const ast::Const*) { |
| if (!decl->attributes.IsEmpty()) { |
| AddError("attribute is not valid for module-scope 'const' declaration", |
| decl->attributes[0]->source); |
| return false; |
| } |
| return Const(global); |
| }, |
| [&](Default) { |
| TINT_ICE(Resolver, diagnostics_) |
| << "Validator::GlobalVariable() called with a unknown variable type: " |
| << decl->TypeInfo().name; |
| return false; |
| }); |
| |
| if (!ok) { |
| return false; |
| } |
| |
| if (global->AddressSpace() == ast::AddressSpace::kFunction) { |
| AddError("module-scope 'var' must not use address space 'function'", decl->source); |
| return false; |
| } |
| |
| switch (global->AddressSpace()) { |
| case ast::AddressSpace::kUniform: |
| case ast::AddressSpace::kStorage: |
| case ast::AddressSpace::kHandle: { |
| // https://gpuweb.github.io/gpuweb/wgsl/#resource-interface |
| // Each resource variable must be declared with both group and binding attributes. |
| if (!decl->HasBindingPoint()) { |
| AddError("resource variables require @group and @binding attributes", decl->source); |
| return false; |
| } |
| break; |
| } |
| default: { |
| auto* binding_attr = ast::GetAttribute<ast::BindingAttribute>(decl->attributes); |
| auto* group_attr = ast::GetAttribute<ast::GroupAttribute>(decl->attributes); |
| if (binding_attr || group_attr) { |
| // https://gpuweb.github.io/gpuweb/wgsl/#attribute-binding |
| // Must only be applied to a resource variable |
| AddError("non-resource variables must not have @group or @binding attributes", |
| decl->source); |
| return false; |
| } |
| } |
| } |
| |
| return true; |
| } |
| |
| bool Validator::Var(const sem::Variable* v) const { |
| auto* var = v->Declaration()->As<ast::Var>(); |
| auto* store_ty = v->Type()->UnwrapRef(); |
| |
| if (!IsStorable(store_ty)) { |
| AddError(sem_.TypeNameOf(store_ty) + " cannot be used as the type of a var", var->source); |
| return false; |
| } |
| |
| if (store_ty->is_handle()) { |
| if (var->declared_address_space != ast::AddressSpace::kNone) { |
| // https://gpuweb.github.io/gpuweb/wgsl/#module-scope-variables |
| // If the store type is a texture type or a sampler type, then the variable declaration |
| // must not have a address space attribute. The address space will always be handle. |
| AddError("variables of type '" + sem_.TypeNameOf(store_ty) + |
| "' must not have a address space", |
| var->source); |
| return false; |
| } |
| } |
| |
| if (var->declared_access != ast::Access::kUndefined) { |
| // https://www.w3.org/TR/WGSL/#access-mode-defaults |
| // When writing a variable declaration or a pointer type in WGSL source: |
| // * For the storage address space, the access mode is optional, and defaults to read. |
| // * For other address spaces, the access mode must not be written. |
| if (var->declared_address_space != ast::AddressSpace::kStorage) { |
| AddError("only variables in <storage> address space may declare an access mode", |
| var->source); |
| return false; |
| } |
| } |
| |
| if (!CheckTypeAccessAddressSpace(v->Type()->UnwrapRef(), v->Access(), v->AddressSpace(), |
| var->attributes, var->source)) { |
| return false; |
| } |
| |
| if (IsValidationEnabled(var->attributes, ast::DisabledValidation::kIgnoreAddressSpace) && |
| (var->declared_address_space == ast::AddressSpace::kIn || |
| var->declared_address_space == ast::AddressSpace::kOut)) { |
| AddError("invalid use of input/output address space", var->source); |
| return false; |
| } |
| return true; |
| } |
| |
| bool Validator::Let(const sem::Variable* v) const { |
| auto* decl = v->Declaration(); |
| auto* storage_ty = v->Type()->UnwrapRef(); |
| |
| if (!(storage_ty->IsConstructible() || storage_ty->Is<sem::Pointer>())) { |
| AddError(sem_.TypeNameOf(storage_ty) + " cannot be used as the type of a 'let'", |
| decl->source); |
| return false; |
| } |
| return true; |
| } |
| |
| bool Validator::Override( |
| const sem::GlobalVariable* v, |
| const utils::Hashmap<OverrideId, const sem::Variable*, 8>& override_ids) const { |
| auto* decl = v->Declaration(); |
| auto* storage_ty = v->Type()->UnwrapRef(); |
| |
| if (auto* init = v->Initializer(); init && init->Stage() > sem::EvaluationStage::kOverride) { |
| AddError("'override' initializer must be an override-expression", |
| init->Declaration()->source); |
| return false; |
| } |
| |
| for (auto* attr : decl->attributes) { |
| if (attr->Is<ast::IdAttribute>()) { |
| auto id = v->OverrideId(); |
| if (auto var = override_ids.Find(id); var && *var != v) { |
| AddError("@id values must be unique", attr->source); |
| AddNote( |
| "a override with an ID of " + std::to_string(id.value) + |
| " was previously declared here:", |
| ast::GetAttribute<ast::IdAttribute>((*var)->Declaration()->attributes)->source); |
| return false; |
| } |
| } else { |
| AddError("attribute is not valid for 'override' declaration", attr->source); |
| return false; |
| } |
| } |
| |
| if (!storage_ty->is_scalar()) { |
| AddError(sem_.TypeNameOf(storage_ty) + " cannot be used as the type of a 'override'", |
| decl->source); |
| return false; |
| } |
| |
| if (storage_ty->Is<sem::F16>()) { |
| AddError("'override' of type f16 is not implemented yet", decl->source); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool Validator::Const(const sem::Variable*) const { |
| return true; |
| } |
| |
| bool Validator::Parameter(const ast::Function* func, const sem::Variable* var) const { |
| auto* decl = var->Declaration(); |
| |
| if (IsValidationDisabled(decl->attributes, ast::DisabledValidation::kFunctionParameter)) { |
| return true; |
| } |
| |
| for (auto* attr : decl->attributes) { |
| if (!func->IsEntryPoint() && !attr->Is<ast::InternalAttribute>()) { |
| AddError("attribute is not valid for non-entry point function parameters", |
| attr->source); |
| return false; |
| } |
| if (!attr->IsAnyOf<ast::BuiltinAttribute, ast::InvariantAttribute, ast::LocationAttribute, |
| ast::InterpolateAttribute, ast::InternalAttribute>() && |
| (IsValidationEnabled(decl->attributes, |
| ast::DisabledValidation::kEntryPointParameter))) { |
| AddError("attribute is not valid for function parameters", attr->source); |
| return false; |
| } |
| } |
| |
| if (auto* ref = var->Type()->As<sem::Pointer>()) { |
| if (IsValidationEnabled(decl->attributes, ast::DisabledValidation::kIgnoreAddressSpace)) { |
| bool ok = false; |
| |
| auto sc = ref->AddressSpace(); |
| switch (sc) { |
| case ast::AddressSpace::kFunction: |
| case ast::AddressSpace::kPrivate: |
| ok = true; |
| break; |
| case ast::AddressSpace::kStorage: |
| case ast::AddressSpace::kUniform: |
| case ast::AddressSpace::kWorkgroup: |
| ok = enabled_extensions_.Contains( |
| ast::Extension::kChromiumExperimentalFullPtrParameters); |
| break; |
| default: |
| break; |
| } |
| if (!ok) { |
| std::stringstream ss; |
| ss << "function parameter of pointer type cannot be in '" << sc |
| << "' address space"; |
| AddError(ss.str(), decl->source); |
| return false; |
| } |
| } |
| } |
| |
| if (IsPlain(var->Type())) { |
| if (!var->Type()->IsConstructible()) { |
| AddError("type of function parameter must be constructible", decl->type->source); |
| return false; |
| } |
| } else if (!var->Type()->IsAnyOf<type::Texture, type::Sampler, sem::Pointer>()) { |
| AddError("type of function parameter cannot be " + sem_.TypeNameOf(var->Type()), |
| decl->source); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool Validator::BuiltinAttribute(const ast::BuiltinAttribute* attr, |
| const type::Type* storage_ty, |
| ast::PipelineStage stage, |
| const bool is_input) const { |
| auto* type = storage_ty->UnwrapRef(); |
| std::stringstream stage_name; |
| stage_name << stage; |
| bool is_stage_mismatch = false; |
| bool is_output = !is_input; |
| switch (attr->builtin) { |
| case ast::BuiltinValue::kPosition: |
| if (stage != ast::PipelineStage::kNone && |
| !((is_input && stage == ast::PipelineStage::kFragment) || |
| (is_output && stage == ast::PipelineStage::kVertex))) { |
| is_stage_mismatch = true; |
| } |
| if (!(type->is_float_vector() && type->As<sem::Vector>()->Width() == 4)) { |
| AddError("store type of " + attr_to_str(attr) + " must be 'vec4<f32>'", |
| attr->source); |
| return false; |
| } |
| break; |
| case ast::BuiltinValue::kGlobalInvocationId: |
| case ast::BuiltinValue::kLocalInvocationId: |
| case ast::BuiltinValue::kNumWorkgroups: |
| case ast::BuiltinValue::kWorkgroupId: |
| if (stage != ast::PipelineStage::kNone && |
| !(stage == ast::PipelineStage::kCompute && is_input)) { |
| is_stage_mismatch = true; |
| } |
| if (!(type->is_unsigned_integer_vector() && type->As<sem::Vector>()->Width() == 3)) { |
| AddError("store type of " + attr_to_str(attr) + " must be 'vec3<u32>'", |
| attr->source); |
| return false; |
| } |
| break; |
| case ast::BuiltinValue::kFragDepth: |
| if (stage != ast::PipelineStage::kNone && |
| !(stage == ast::PipelineStage::kFragment && !is_input)) { |
| is_stage_mismatch = true; |
| } |
| if (!type->Is<sem::F32>()) { |
| AddError("store type of " + attr_to_str(attr) + " must be 'f32'", attr->source); |
| return false; |
| } |
| break; |
| case ast::BuiltinValue::kFrontFacing: |
| if (stage != ast::PipelineStage::kNone && |
| !(stage == ast::PipelineStage::kFragment && is_input)) { |
| is_stage_mismatch = true; |
| } |
| if (!type->Is<sem::Bool>()) { |
| AddError("store type of " + attr_to_str(attr) + " must be 'bool'", attr->source); |
| return false; |
| } |
| break; |
| case ast::BuiltinValue::kLocalInvocationIndex: |
| if (stage != ast::PipelineStage::kNone && |
| !(stage == ast::PipelineStage::kCompute && is_input)) { |
| is_stage_mismatch = true; |
| } |
| if (!type->Is<sem::U32>()) { |
| AddError("store type of " + attr_to_str(attr) + " must be 'u32'", attr->source); |
| return false; |
| } |
| break; |
| case ast::BuiltinValue::kVertexIndex: |
| case ast::BuiltinValue::kInstanceIndex: |
| if (stage != ast::PipelineStage::kNone && |
| !(stage == ast::PipelineStage::kVertex && is_input)) { |
| is_stage_mismatch = true; |
| } |
| if (!type->Is<sem::U32>()) { |
| AddError("store type of " + attr_to_str(attr) + " must be 'u32'", attr->source); |
| return false; |
| } |
| break; |
| case ast::BuiltinValue::kSampleMask: |
| if (stage != ast::PipelineStage::kNone && !(stage == ast::PipelineStage::kFragment)) { |
| is_stage_mismatch = true; |
| } |
| if (!type->Is<sem::U32>()) { |
| AddError("store type of " + attr_to_str(attr) + " must be 'u32'", attr->source); |
| return false; |
| } |
| break; |
| case ast::BuiltinValue::kSampleIndex: |
| if (stage != ast::PipelineStage::kNone && |
| !(stage == ast::PipelineStage::kFragment && is_input)) { |
| is_stage_mismatch = true; |
| } |
| if (!type->Is<sem::U32>()) { |
| AddError("store type of " + attr_to_str(attr) + " must be 'u32'", attr->source); |
| return false; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| if (is_stage_mismatch) { |
| AddError(attr_to_str(attr) + " cannot be used in " + |
| (is_input ? "input of " : "output of ") + stage_name.str() + " pipeline stage", |
| attr->source); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool Validator::InterpolateAttribute(const ast::InterpolateAttribute* attr, |
| const type::Type* storage_ty) const { |
| auto* type = storage_ty->UnwrapRef(); |
| |
| if (type->is_integer_scalar_or_vector() && attr->type != ast::InterpolationType::kFlat) { |
| AddError("interpolation type must be 'flat' for integral user-defined IO types", |
| attr->source); |
| return false; |
| } |
| |
| if (attr->type == ast::InterpolationType::kFlat && |
| attr->sampling != ast::InterpolationSampling::kUndefined) { |
| AddError("flat interpolation attribute must not have a sampling parameter", attr->source); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool Validator::Function(const sem::Function* func, ast::PipelineStage stage) const { |
| auto* decl = func->Declaration(); |
| |
| for (auto* attr : decl->attributes) { |
| if (attr->Is<ast::WorkgroupAttribute>()) { |
| if (decl->PipelineStage() != ast::PipelineStage::kCompute) { |
| AddError("the workgroup_size attribute is only valid for compute stages", |
| attr->source); |
| return false; |
| } |
| } else if (!attr->IsAnyOf<ast::StageAttribute, ast::InternalAttribute>()) { |
| AddError("attribute is not valid for functions", attr->source); |
| return false; |
| } |
| } |
| |
| if (decl->params.Length() > 255) { |
| AddError("functions may declare at most 255 parameters", decl->source); |
| return false; |
| } |
| |
| if (!func->ReturnType()->Is<sem::Void>()) { |
| if (!func->ReturnType()->IsConstructible()) { |
| AddError("function return type must be a constructible type", |
| decl->return_type->source); |
| return false; |
| } |
| |
| if (decl->body) { |
| sem::Behaviors behaviors{sem::Behavior::kNext}; |
| if (auto* last = decl->body->Last()) { |
| behaviors = sem_.Get(last)->Behaviors(); |
| } |
| if (behaviors.Contains(sem::Behavior::kNext)) { |
| AddError("missing return at end of function", decl->source); |
| return false; |
| } |
| } else if (IsValidationEnabled(decl->attributes, |
| ast::DisabledValidation::kFunctionHasNoBody)) { |
| TINT_ICE(Resolver, diagnostics_) |
| << "Function " << symbols_.NameFor(decl->symbol) << " has no body"; |
| } |
| |
| for (auto* attr : decl->return_type_attributes) { |
| if (!decl->IsEntryPoint()) { |
| AddError("attribute is not valid for non-entry point function return types", |
| attr->source); |
| return false; |
| } |
| if (!attr->IsAnyOf<ast::BuiltinAttribute, ast::InternalAttribute, |
| ast::LocationAttribute, ast::InterpolateAttribute, |
| ast::InvariantAttribute>() && |
| (IsValidationEnabled(decl->attributes, |
| ast::DisabledValidation::kEntryPointParameter) && |
| IsValidationEnabled(decl->attributes, |
| ast::DisabledValidation::kFunctionParameter))) { |
| AddError("attribute is not valid for entry point return types", attr->source); |
| return false; |
| } |
| } |
| } |
| |
| if (decl->IsEntryPoint()) { |
| if (!EntryPoint(func, stage)) { |
| return false; |
| } |
| } |
| |
| // https://www.w3.org/TR/WGSL/#behaviors-rules |
| // a function behavior is always one of {}, or {Next}. |
| if (func->Behaviors() != sem::Behaviors{} && func->Behaviors() != sem::Behavior::kNext) { |
| auto name = symbols_.NameFor(decl->symbol); |
| TINT_ICE(Resolver, diagnostics_) |
| << "function '" << name << "' behaviors are: " << func->Behaviors(); |
| } |
| |
| return true; |
| } |
| |
| bool Validator::EntryPoint(const sem::Function* func, ast::PipelineStage stage) const { |
| auto* decl = func->Declaration(); |
| |
| // Use a lambda to validate the entry point attributes for a type. |
| // Persistent state is used to track which builtins and locations have already been seen, in |
| // order to catch conflicts. |
| // TODO(jrprice): This state could be stored in sem::Function instead, and then passed to |
| // sem::Function since it would be useful there too. |
| utils::Hashset<ast::BuiltinValue, 4> builtins; |
| utils::Hashset<uint32_t, 8> locations; |
| enum class ParamOrRetType { |
| kParameter, |
| kReturnType, |
| }; |
| |
| // Inner lambda that is applied to a type and all of its members. |
| auto validate_entry_point_attributes_inner = [&](utils::VectorRef<const ast::Attribute*> attrs, |
| const type::Type* ty, Source source, |
| ParamOrRetType param_or_ret, |
| bool is_struct_member, |
| std::optional<uint32_t> location) { |
| // Scan attributes for pipeline IO attributes. |
| // Check for overlap with attributes that have been seen previously. |
| const ast::Attribute* pipeline_io_attribute = nullptr; |
| const ast::InterpolateAttribute* interpolate_attribute = nullptr; |
| const ast::InvariantAttribute* invariant_attribute = nullptr; |
| for (auto* attr : attrs) { |
| auto is_invalid_compute_shader_attribute = false; |
| |
| if (auto* builtin = attr->As<ast::BuiltinAttribute>()) { |
| if (pipeline_io_attribute) { |
| AddError("multiple entry point IO attributes", attr->source); |
| AddNote("previously consumed " + attr_to_str(pipeline_io_attribute, location), |
| pipeline_io_attribute->source); |
| return false; |
| } |
| pipeline_io_attribute = attr; |
| |
| if (builtins.Contains(builtin->builtin)) { |
| AddError(attr_to_str(builtin) + |
| " attribute appears multiple times as pipeline " + |
| (param_or_ret == ParamOrRetType::kParameter ? "input" : "output"), |
| decl->source); |
| return false; |
| } |
| |
| if (!BuiltinAttribute(builtin, ty, stage, |
| /* is_input */ param_or_ret == ParamOrRetType::kParameter)) { |
| return false; |
| } |
| builtins.Add(builtin->builtin); |
| } else if (auto* loc_attr = attr->As<ast::LocationAttribute>()) { |
| if (pipeline_io_attribute) { |
| AddError("multiple entry point IO attributes", attr->source); |
| AddNote("previously consumed " + attr_to_str(pipeline_io_attribute), |
| pipeline_io_attribute->source); |
| return false; |
| } |
| pipeline_io_attribute = attr; |
| |
| bool is_input = param_or_ret == ParamOrRetType::kParameter; |
| |
| if (!location.has_value()) { |
| TINT_ICE(Resolver, diagnostics_) << "Location has no value"; |
| return false; |
| } |
| |
| if (!LocationAttribute(loc_attr, location.value(), ty, locations, stage, source, |
| is_input)) { |
| return false; |
| } |
| } else if (auto* interpolate = attr->As<ast::InterpolateAttribute>()) { |
| if (decl->PipelineStage() == ast::PipelineStage::kCompute) { |
| is_invalid_compute_shader_attribute = true; |
| } else if (!InterpolateAttribute(interpolate, ty)) { |
| return false; |
| } |
| interpolate_attribute = interpolate; |
| } else if (auto* invariant = attr->As<ast::InvariantAttribute>()) { |
| if (decl->PipelineStage() == ast::PipelineStage::kCompute) { |
| is_invalid_compute_shader_attribute = true; |
| } |
| invariant_attribute = invariant; |
| } |
| if (is_invalid_compute_shader_attribute) { |
| std::string input_or_output = |
| param_or_ret == ParamOrRetType::kParameter ? "inputs" : "output"; |
| AddError("attribute is not valid for compute shader " + input_or_output, |
| attr->source); |
| return false; |
| } |
| } |
| |
| if (IsValidationEnabled(attrs, ast::DisabledValidation::kEntryPointParameter)) { |
| if (is_struct_member && ty->Is<sem::Struct>()) { |
| AddError("nested structures cannot be used for entry point IO", source); |
| return false; |
| } |
| |
| if (!ty->Is<sem::Struct>() && !pipeline_io_attribute) { |
| std::string err = "missing entry point IO attribute"; |
| if (!is_struct_member) { |
| err += (param_or_ret == ParamOrRetType::kParameter ? " on parameter" |
| : " on return type"); |
| } |
| AddError(err, source); |
| return false; |
| } |
| |
| if (pipeline_io_attribute && pipeline_io_attribute->Is<ast::LocationAttribute>()) { |
| if (ty->is_integer_scalar_or_vector() && !interpolate_attribute) { |
| if (decl->PipelineStage() == ast::PipelineStage::kVertex && |
| param_or_ret == ParamOrRetType::kReturnType) { |
| AddError( |
| "integral user-defined vertex outputs must have a flat " |
| "interpolation attribute", |
| source); |
| return false; |
| } |
| if (decl->PipelineStage() == ast::PipelineStage::kFragment && |
| param_or_ret == ParamOrRetType::kParameter) { |
| AddError( |
| "integral user-defined fragment inputs must have a flat " |
| "interpolation attribute", |
| source); |
| return false; |
| } |
| } |
| } |
| |
| if (interpolate_attribute) { |
| if (!pipeline_io_attribute || |
| !pipeline_io_attribute->Is<ast::LocationAttribute>()) { |
| AddError("interpolate attribute must only be used with @location", |
| interpolate_attribute->source); |
| return false; |
| } |
| } |
| |
| if (invariant_attribute) { |
| bool has_position = false; |
| if (pipeline_io_attribute) { |
| if (auto* builtin = pipeline_io_attribute->As<ast::BuiltinAttribute>()) { |
| has_position = (builtin->builtin == ast::BuiltinValue::kPosition); |
| } |
| } |
| if (!has_position) { |
| AddError( |
| "invariant attribute must only be applied to a position " |
| "builtin", |
| invariant_attribute->source); |
| return false; |
| } |
| } |
| } |
| return true; |
| }; |
| |
| // Outer lambda for validating the entry point attributes for a type. |
| auto validate_entry_point_attributes = [&](utils::VectorRef<const ast::Attribute*> attrs, |
| const type::Type* ty, Source source, |
| ParamOrRetType param_or_ret, |
| std::optional<uint32_t> location) { |
| if (!validate_entry_point_attributes_inner(attrs, ty, source, param_or_ret, |
| /*is_struct_member*/ false, location)) { |
| return false; |
| } |
| |
| if (auto* str = ty->As<sem::Struct>()) { |
| for (auto* member : str->Members()) { |
| if (!validate_entry_point_attributes_inner( |
| member->Declaration()->attributes, member->Type(), member->Source(), |
| param_or_ret, |
| /*is_struct_member*/ true, member->Location())) { |
| AddNote("while analyzing entry point '" + symbols_.NameFor(decl->symbol) + "'", |
| decl->source); |
| return false; |
| } |
| } |
| } |
| |
| return true; |
| }; |
| |
| for (auto* param : func->Parameters()) { |
| auto* param_decl = param->Declaration(); |
| if (!validate_entry_point_attributes(param_decl->attributes, param->Type(), |
| param_decl->source, ParamOrRetType::kParameter, |
| param->Location())) { |
| return false; |
| } |
| } |
| |
| // Clear IO sets after parameter validation. Builtin and location attributes in return types |
| // should be validated independently from those used in parameters. |
| builtins.Clear(); |
| locations.Clear(); |
| |
| if (!func->ReturnType()->Is<sem::Void>()) { |
| if (!validate_entry_point_attributes(decl->return_type_attributes, func->ReturnType(), |
| decl->source, ParamOrRetType::kReturnType, |
| func->ReturnLocation())) { |
| return false; |
| } |
| } |
| |
| if (decl->PipelineStage() == ast::PipelineStage::kVertex && |
| !builtins.Contains(ast::BuiltinValue::kPosition)) { |
| // Check module-scope variables, as the SPIR-V sanitizer generates these. |
| bool found = false; |
| for (auto* global : func->TransitivelyReferencedGlobals()) { |
| if (auto* builtin = |
| ast::GetAttribute<ast::BuiltinAttribute>(global->Declaration()->attributes)) { |
| if (builtin->builtin == ast::BuiltinValue::kPosition) { |
| found = true; |
| break; |
| } |
| } |
| } |
| if (!found) { |
| AddError("a vertex shader must include the 'position' builtin in its return type", |
| decl->source); |
| return false; |
| } |
| } |
| |
| if (decl->PipelineStage() == ast::PipelineStage::kCompute) { |
| if (!ast::HasAttribute<ast::WorkgroupAttribute>(decl->attributes)) { |
| AddError("a compute shader must include 'workgroup_size' in its attributes", |
| decl->source); |
| return false; |
| } |
| } |
| |
| // Validate there are no resource variable binding collisions |
| utils::Hashmap<sem::BindingPoint, const ast::Variable*, 8> binding_points; |
| for (auto* global : func->TransitivelyReferencedGlobals()) { |
| auto* var_decl = global->Declaration()->As<ast::Var>(); |
| if (!var_decl || !var_decl->HasBindingPoint()) { |
| continue; |
| } |
| auto bp = global->BindingPoint(); |
| if (auto added = binding_points.Add(bp, var_decl); |
| !added && |
| IsValidationEnabled(decl->attributes, |
| ast::DisabledValidation::kBindingPointCollision) && |
| IsValidationEnabled((*added.value)->attributes, |
| ast::DisabledValidation::kBindingPointCollision)) { |
| // https://gpuweb.github.io/gpuweb/wgsl/#resource-interface |
| // Bindings must not alias within a shader stage: two different variables in the |
| // resource interface of a given shader must not have the same group and binding values, |
| // when considered as a pair of values. |
| auto func_name = symbols_.NameFor(decl->symbol); |
| AddError( |
| "entry point '" + func_name + |
| "' references multiple variables that use the same resource binding @group(" + |
| std::to_string(bp.group) + "), @binding(" + std::to_string(bp.binding) + ")", |
| var_decl->source); |
| AddNote("first resource binding usage declared here", (*added.value)->source); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| bool Validator::EvaluationStage(const sem::Expression* expr, |
| sem::EvaluationStage latest_stage, |
| std::string_view constraint) const { |
| if (expr->Stage() > latest_stage) { |
| auto stage_name = [](sem::EvaluationStage stage) -> std::string { |
| switch (stage) { |
| case sem::EvaluationStage::kRuntime: |
| return "a runtime-expression"; |
| case sem::EvaluationStage::kOverride: |
| return "an override-expression"; |
| case sem::EvaluationStage::kConstant: |
| return "a const-expression"; |
| } |
| return "<unknown>"; |
| }; |
| |
| AddError(std::string(constraint) + " requires " + stage_name(latest_stage) + |
| ", but expression is " + stage_name(expr->Stage()), |
| expr->Declaration()->source); |
| |
| if (auto* stmt = expr->Stmt()) { |
| if (auto* decl = As<ast::VariableDeclStatement>(stmt->Declaration())) { |
| if (decl->variable->Is<ast::Const>()) { |
| AddNote("consider changing 'const' to 'let'", decl->source); |
| } |
| } |
| } |
| return false; |
| } |
| return true; |
| } |
| |
| bool Validator::Statements(utils::VectorRef<const ast::Statement*> stmts) const { |
| for (auto* stmt : stmts) { |
| if (!sem_.Get(stmt)->IsReachable()) { |
| /// TODO(https://github.com/gpuweb/gpuweb/issues/2378): This may need to |
| /// become an error. |
| AddWarning("code is unreachable", stmt->source); |
| break; |
| } |
| } |
| return true; |
| } |
| |
| bool Validator::Bitcast(const ast::BitcastExpression* cast, const type::Type* to) const { |
| auto* from = sem_.TypeOf(cast->expr)->UnwrapRef(); |
| if (!from->is_numeric_scalar_or_vector()) { |
| AddError("'" + sem_.TypeNameOf(from) + "' cannot be bitcast", cast->expr->source); |
| return false; |
| } |
| if (!to->is_numeric_scalar_or_vector()) { |
| AddError("cannot bitcast to '" + sem_.TypeNameOf(to) + "'", cast->type->source); |
| return false; |
| } |
| |
| auto width = [&](const type::Type* ty) { |
| if (auto* vec = ty->As<sem::Vector>()) { |
| return vec->Width(); |
| } |
| return 1u; |
| }; |
| |
| if (width(from) != width(to)) { |
| AddError( |
| "cannot bitcast from '" + sem_.TypeNameOf(from) + "' to '" + sem_.TypeNameOf(to) + "'", |
| cast->source); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool Validator::BreakStatement(const sem::Statement* stmt, |
| sem::Statement* current_statement) const { |
| if (!stmt->FindFirstParent<sem::LoopBlockStatement, sem::CaseStatement>()) { |
| AddError("break statement must be in a loop or switch case", stmt->Declaration()->source); |
| return false; |
| } |
| if (ClosestContinuing(/*stop_at_loop*/ true, current_statement) != nullptr) { |
| AddError( |
| "`break` must not be used to exit from a continuing block. Use `break-if` instead.", |
| stmt->Declaration()->source); |
| return false; |
| } |
| return true; |
| } |
| |
| bool Validator::ContinueStatement(const sem::Statement* stmt, |
| sem::Statement* current_statement) const { |
| if (auto* continuing = ClosestContinuing(/*stop_at_loop*/ true, current_statement)) { |
| AddError("continuing blocks must not contain a continue statement", |
| stmt->Declaration()->source); |
| if (continuing != stmt->Declaration() && continuing != stmt->Parent()->Declaration()) { |
| AddNote("see continuing block here", continuing->source); |
| } |
| return false; |
| } |
| |
| if (!stmt->FindFirstParent<sem::LoopBlockStatement>()) { |
| AddError("continue statement must be in a loop", stmt->Declaration()->source); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool Validator::Call(const sem::Call* call, sem::Statement* current_statement) const { |
| auto* expr = call->Declaration(); |
| bool is_call_stmt = |
| current_statement && Is<ast::CallStatement>(current_statement->Declaration(), |
| [&](auto* stmt) { return stmt->expr == expr; }); |
| if (is_call_stmt) { |
| return Switch( |
| call->Target(), // |
| [&](const sem::TypeConversion*) { |
| AddError("type conversion evaluated but not used", call->Declaration()->source); |
| return false; |
| }, |
| [&](const sem::TypeInitializer*) { |
| AddError("type initializer evaluated but not used", call->Declaration()->source); |
| return false; |
| }, |
| [&](Default) { return true; }); |
| } |
| |
| return true; |
| } |
| |
| bool Validator::LoopStatement(const sem::LoopStatement* stmt) const { |
| if (stmt->Behaviors().Empty()) { |
| AddError("loop does not exit", stmt->Declaration()->source.Begin()); |
| return false; |
| } |
| return true; |
| } |
| |
| bool Validator::ForLoopStatement(const sem::ForLoopStatement* stmt) const { |
| if (stmt->Behaviors().Empty()) { |
| AddError("for-loop does not exit", stmt->Declaration()->source.Begin()); |
| return false; |
| } |
| if (auto* cond = stmt->Condition()) { |
| auto* cond_ty = cond->Type()->UnwrapRef(); |
| if (!cond_ty->Is<sem::Bool>()) { |
| AddError("for-loop condition must be bool, got " + sem_.TypeNameOf(cond_ty), |
| stmt->Condition()->Declaration()->source); |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| bool Validator::WhileStatement(const sem::WhileStatement* stmt) const { |
| if (stmt->Behaviors().Empty()) { |
| AddError("while does not exit", stmt->Declaration()->source.Begin()); |
| return false; |
| } |
| if (auto* cond = stmt->Condition()) { |
| auto* cond_ty = cond->Type()->UnwrapRef(); |
| if (!cond_ty->Is<sem::Bool>()) { |
| AddError("while condition must be bool, got " + sem_.TypeNameOf(cond_ty), |
| stmt->Condition()->Declaration()->source); |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| bool Validator::BreakIfStatement(const sem::BreakIfStatement* stmt, |
| sem::Statement* current_statement) const { |
| auto* cond_ty = stmt->Condition()->Type()->UnwrapRef(); |
| if (!cond_ty->Is<sem::Bool>()) { |
| AddError("break-if statement condition must be bool, got " + sem_.TypeNameOf(cond_ty), |
| stmt->Condition()->Declaration()->source); |
| return false; |
| } |
| |
| for (const auto* s = current_statement; s != nullptr; s = s->Parent()) { |
| if (s->Is<sem::LoopStatement>()) { |
| break; |
| } |
| if (auto* continuing = s->As<sem::LoopContinuingBlockStatement>()) { |
| if (continuing->Declaration()->statements.Back() != stmt->Declaration()) { |
| AddError("break-if must be the last statement in a continuing block", |
| stmt->Declaration()->source); |
| AddNote("see continuing block here", s->Declaration()->source); |
| return false; |
| } |
| return true; |
| } |
| } |
| |
| AddError("break-if must be in a continuing block", stmt->Declaration()->source); |
| return false; |
| } |
| |
| bool Validator::IfStatement(const sem::IfStatement* stmt) const { |
| auto* cond_ty = stmt->Condition()->Type()->UnwrapRef(); |
| if (!cond_ty->Is<sem::Bool>()) { |
| AddError("if statement condition must be bool, got " + sem_.TypeNameOf(cond_ty), |
| stmt->Condition()->Declaration()->source); |
| return false; |
| } |
| return true; |
| } |
| |
| bool Validator::BuiltinCall(const sem::Call* call) const { |
| if (call->Type()->Is<sem::Void>()) { |
| bool is_call_statement = false; |
| // Some built-in call are not owned by a statement, e.g. a built-in called in global |
| // variable declaration. Calling no-return-value built-in in these context is invalid as |
| // well. |
| if (auto* call_stmt = call->Stmt()) { |
| if (auto* call_stmt_ast = As<ast::CallStatement>(call_stmt->Declaration())) { |
| if (call_stmt_ast->expr == call->Declaration()) { |
| is_call_statement = true; |
| } |
| } |
| } |
| if (!is_call_statement) { |
| // https://gpuweb.github.io/gpuweb/wgsl/#function-call-expr |
| // If the called function does not return a value, a function call |
| // statement should be used instead. |
| auto* ident = call->Declaration()->target.name; |
| auto name = symbols_.NameFor(ident->symbol); |
| AddError("builtin '" + name + "' does not return a value", call->Declaration()->source); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| bool Validator::TextureBuiltinFunction(const sem::Call* call) const { |
| auto* builtin = call->Target()->As<sem::Builtin>(); |
| if (!builtin) { |
| return false; |
| } |
| |
| std::string func_name = builtin->str(); |
| auto& signature = builtin->Signature(); |
| |
| auto check_arg_is_constexpr = [&](sem::ParameterUsage usage, int min, int max) { |
| auto signed_index = signature.IndexOf(usage); |
| if (signed_index < 0) { |
| return true; |
| } |
| auto index = static_cast<size_t>(signed_index); |
| std::string name = sem::str(usage); |
| auto* arg = call->Arguments()[index]; |
| if (auto values = arg->ConstantValue()) { |
| if (auto* vector = values->Type()->As<sem::Vector>()) { |
| for (size_t i = 0; i < vector->Width(); i++) { |
| auto value = values->Index(i)->As<AInt>(); |
| if (value < min || value > max) { |
| AddError("each component of the " + name + " argument must be at least " + |
| std::to_string(min) + " and at most " + std::to_string(max) + |
| ". " + name + " component " + std::to_string(i) + " is " + |
| std::to_string(value), |
| arg->Declaration()->source); |
| return false; |
| } |
| } |
| } else { |
| auto value = values->As<AInt>(); |
| if (value < min || value > max) { |
| AddError("the " + name + " argument must be at least " + std::to_string(min) + |
| " and at most " + std::to_string(max) + ". " + name + " is " + |
| std::to_string(value), |
| arg->Declaration()->source); |
| return false; |
| } |
| } |
| return true; |
| } |
| AddError("the " + name + " argument must be a const-expression", |
| arg->Declaration()->source); |
| return false; |
| }; |
| |
| return check_arg_is_constexpr(sem::ParameterUsage::kOffset, -8, 7) && |
| check_arg_is_constexpr(sem::ParameterUsage::kComponent, 0, 3); |
| } |
| |
| bool Validator::RequiredExtensionForBuiltinFunction(const sem::Call* call) const { |
| const auto* builtin = call->Target()->As<sem::Builtin>(); |
| if (!builtin) { |
| return true; |
| } |
| |
| const auto extension = builtin->RequiredExtension(); |
| if (extension == ast::Extension::kUndefined) { |
| return true; |
| } |
| |
| if (!enabled_extensions_.Contains(extension)) { |
| AddError("cannot call built-in function '" + std::string(builtin->str()) + |
| "' without extension " + utils::ToString(extension), |
| call->Declaration()->source); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool Validator::FunctionCall(const sem::Call* call, sem::Statement* current_statement) const { |
| auto* decl = call->Declaration(); |
| auto* target = call->Target()->As<sem::Function>(); |
| auto sym = decl->target.name->symbol; |
| auto name = symbols_.NameFor(sym); |
| |
| if (!current_statement) { // Function call at module-scope. |
| AddError("functions cannot be called at module-scope", decl->source); |
| return false; |
| } |
| |
| if (target->Declaration()->IsEntryPoint()) { |
| // https://www.w3.org/TR/WGSL/#function-restriction |
| // An entry point must never be the target of a function call. |
| AddError("entry point functions cannot be the target of a function call", decl->source); |
| return false; |
| } |
| |
| if (decl->args.Length() != target->Parameters().Length()) { |
| bool more = decl->args.Length() > target->Parameters().Length(); |
| AddError("too " + (more ? std::string("many") : std::string("few")) + |
| " arguments in call to '" + name + "', expected " + |
| std::to_string(target->Parameters().Length()) + ", got " + |
| std::to_string(call->Arguments().Length()), |
| decl->source); |
| return false; |
| } |
| |
| for (size_t i = 0; i < call->Arguments().Length(); ++i) { |
| const sem::Variable* param = target->Parameters()[i]; |
| const ast::Expression* arg_expr = decl->args[i]; |
| auto* param_type = param->Type(); |
| auto* arg_type = sem_.TypeOf(arg_expr)->UnwrapRef(); |
| |
| if (param_type != arg_type) { |
| AddError("type mismatch for argument " + std::to_string(i + 1) + " in call to '" + |
| name + "', expected '" + sem_.TypeNameOf(param_type) + "', got '" + |
| sem_.TypeNameOf(arg_type) + "'", |
| arg_expr->source); |
| return false; |
| } |
| |
| if (param_type->Is<sem::Pointer>() && |
| !enabled_extensions_.Contains(ast::Extension::kChromiumExperimentalFullPtrParameters)) { |
| // https://gpuweb.github.io/gpuweb/wgsl/#function-restriction |
| // Each argument of pointer type to a user-defined function must have the same memory |
| // view as its root identifier. |
| // We can validate this by just comparing the store type of the argument with that of |
| // its root identifier, as these will match iff the memory view is the same. |
| auto* arg_store_type = arg_type->As<sem::Pointer>()->StoreType(); |
| auto* root = call->Arguments()[i]->RootIdentifier(); |
| auto* root_ptr_ty = root->Type()->As<sem::Pointer>(); |
| auto* root_ref_ty = root->Type()->As<sem::Reference>(); |
| TINT_ASSERT(Resolver, root_ptr_ty || root_ref_ty); |
| const type::Type* root_store_type; |
| if (root_ptr_ty) { |
| root_store_type = root_ptr_ty->StoreType(); |
| } else { |
| root_store_type = root_ref_ty->StoreType(); |
| } |
| if (root_store_type != arg_store_type && |
| IsValidationEnabled(param->Declaration()->attributes, |
| ast::DisabledValidation::kIgnoreInvalidPointerArgument)) { |
| AddError( |
| "arguments of pointer type must not point to a subset of the originating " |
| "variable", |
| arg_expr->source); |
| return false; |
| } |
| } |
| } |
| |
| if (call->Type()->Is<sem::Void>()) { |
| bool is_call_statement = false; |
| if (auto* call_stmt = As<ast::CallStatement>(call->Stmt()->Declaration())) { |
| if (call_stmt->expr == call->Declaration()) { |
| is_call_statement = true; |
| } |
| } |
| if (!is_call_statement) { |
| // https://gpuweb.github.io/gpuweb/wgsl/#function-call-expr |
| // If the called function does not return a value, a function call |
| // statement should be used instead. |
| AddError("function '" + name + "' does not return a value", decl->source); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| bool Validator::StructureInitializer(const ast::CallExpression* ctor, |
| const sem::Struct* struct_type) const { |
| if (!struct_type->IsConstructible()) { |
| AddError("struct initializer has non-constructible type", ctor->source); |
| return false; |
| } |
| |
| if (ctor->args.Length() > 0) { |
| if (ctor->args.Length() != struct_type->Members().Length()) { |
| std::string fm = ctor->args.Length() < struct_type->Members().Length() ? "few" : "many"; |
| AddError("struct initializer has too " + fm + " inputs: expected " + |
| std::to_string(struct_type->Members().Length()) + ", found " + |
| std::to_string(ctor->args.Length()), |
| ctor->source); |
| return false; |
| } |
| for (auto* member : struct_type->Members()) { |
| auto* value = ctor->args[member->Index()]; |
| auto* value_ty = sem_.TypeOf(value); |
| if (member->Type() != value_ty->UnwrapRef()) { |
| AddError( |
| "type in struct initializer does not match struct member type: expected '" + |
| sem_.TypeNameOf(member->Type()) + "', found '" + sem_.TypeNameOf(value_ty) + |
| "'", |
| value->source); |
| return false; |
| } |
| } |
| } |
| return true; |
| } |
| |
| bool Validator::ArrayInitializer(const ast::CallExpression* ctor, |
| const sem::Array* array_type) const { |
| auto& values = ctor->args; |
| auto* elem_ty = array_type->ElemType(); |
| for (auto* value : values) { |
| auto* value_ty = sem_.TypeOf(value)->UnwrapRef(); |
| if (type::Type::ConversionRank(value_ty, elem_ty) == type::Type::kNoConversion) { |
| AddError("'" + sem_.TypeNameOf(value_ty) + |
| "' cannot be used to construct an array of '" + sem_.TypeNameOf(elem_ty) + |
| "'", |
| value->source); |
| return false; |
| } |
| } |
| |
| auto* c = array_type->Count(); |
| if (c->Is<type::RuntimeArrayCount>()) { |
| AddError("cannot construct a runtime-sized array", ctor->source); |
| return false; |
| } |
| |
| if (c->IsAnyOf<sem::NamedOverrideArrayCount, sem::UnnamedOverrideArrayCount>()) { |
| AddError("cannot construct an array that has an override-expression count", ctor->source); |
| return false; |
| } |
| |
| if (!elem_ty->IsConstructible()) { |
| AddError("array initializer has non-constructible element type", ctor->source); |
| return false; |
| } |
| |
| if (!c->Is<type::ConstantArrayCount>()) { |
| TINT_ICE(Resolver, diagnostics_) << "Invalid ArrayCount found"; |
| return false; |
| } |
| |
| const auto count = c->As<type::ConstantArrayCount>()->value; |
| if (!values.IsEmpty() && (values.Length() != count)) { |
| std::string fm = values.Length() < count ? "few" : "many"; |
| AddError("array initializer has too " + fm + " elements: expected " + |
| std::to_string(count) + ", found " + std::to_string(values.Length()), |
| ctor->source); |
| return false; |
| } |
| return true; |
| } |
| |
| bool Validator::Vector(const sem::Vector* ty, const Source& source) const { |
| if (!ty->type()->is_scalar()) { |
| AddError("vector element type must be 'bool', 'f32', 'f16', 'i32' or 'u32'", source); |
| return false; |
| } |
| return true; |
| } |
| |
| bool Validator::Matrix(const sem::Matrix* ty, const Source& source) const { |
| if (!ty->is_float_matrix()) { |
| AddError("matrix element type must be 'f32' or 'f16'", source); |
| return false; |
| } |
| return true; |
| } |
| |
| bool Validator::PipelineStages(utils::VectorRef<sem::Function*> entry_points) const { |
| auto backtrace = [&](const sem::Function* func, const sem::Function* entry_point) { |
| if (func != entry_point) { |
| TraverseCallChain(diagnostics_, entry_point, func, [&](const sem::Function* f) { |
| AddNote("called by function '" + symbols_.NameFor(f->Declaration()->symbol) + "'", |
| f->Declaration()->source); |
| }); |
| AddNote("called by entry point '" + |
| symbols_.NameFor(entry_point->Declaration()->symbol) + "'", |
| entry_point->Declaration()->source); |
| } |
| }; |
| |
| auto check_workgroup_storage = [&](const sem::Function* func, |
| const sem::Function* entry_point) { |
| auto stage = entry_point->Declaration()->PipelineStage(); |
| if (stage != ast::PipelineStage::kCompute) { |
| for (auto* var : func->DirectlyReferencedGlobals()) { |
| if (var->AddressSpace() == ast::AddressSpace::kWorkgroup) { |
| std::stringstream stage_name; |
| stage_name << stage; |
| for (auto* user : var->Users()) { |
| if (func == user->Stmt()->Function()) { |
| AddError("workgroup memory cannot be used by " + stage_name.str() + |
| " pipeline stage", |
| user->Declaration()->source); |
| break; |
| } |
| } |
| AddNote("variable is declared here", var->Declaration()->source); |
| backtrace(func, entry_point); |
| return false; |
| } |
| } |
| } |
| return true; |
| }; |
| |
| auto check_builtin_calls = [&](const sem::Function* func, const sem::Function* entry_point) { |
| auto stage = entry_point->Declaration()->PipelineStage(); |
| for (auto* builtin : func->DirectlyCalledBuiltins()) { |
| if (!builtin->SupportedStages().Contains(stage)) { |
| auto* call = func->FindDirectCallTo(builtin); |
| std::stringstream err; |
| err << "built-in cannot be used by " << stage << " pipeline stage"; |
| AddError(err.str(), |
| call ? call->Declaration()->source : func->Declaration()->source); |
| backtrace(func, entry_point); |
| return false; |
| } |
| } |
| return true; |
| }; |
| |
| auto check_no_discards = [&](const sem::Function* func, const sem::Function* entry_point) { |
| if (auto* discard = func->DiscardStatement()) { |
| auto stage = entry_point->Declaration()->PipelineStage(); |
| std::stringstream err; |
| err << "discard statement cannot be used in " << stage << " pipeline stage"; |
| AddError(err.str(), discard->Declaration()->source); |
| backtrace(func, entry_point); |
| return false; |
| } |
| return true; |
| }; |
| |
| auto check_func = [&](const sem::Function* func, const sem::Function* entry_point) { |
| if (!check_workgroup_storage(func, entry_point)) { |
| return false; |
| } |
| if (!check_builtin_calls(func, entry_point)) { |
| return false; |
| } |
| if (entry_point->Declaration()->PipelineStage() != ast::PipelineStage::kFragment) { |
| if (!check_no_discards(func, entry_point)) { |
| return false; |
| } |
| } |
| return true; |
| }; |
| |
| for (auto* entry_point : entry_points) { |
| if (!check_func(entry_point, entry_point)) { |
| return false; |
| } |
| for (auto* func : entry_point->TransitivelyCalledFunctions()) { |
| if (!check_func(func, entry_point)) { |
| return false; |
| } |
| } |
| } |
| |
| return true; |
| } |
| |
| bool Validator::PushConstants(utils::VectorRef<sem::Function*> entry_points) const { |
| for (auto* entry_point : entry_points) { |
| // State checked and modified by check_push_constant so that it remembers previously seen |
| // push_constant variables for an entry-point. |
| const sem::Variable* push_constant_var = nullptr; |
| const sem::Function* push_constant_func = nullptr; |
| |
| auto check_push_constant = [&](const sem::Function* func, const sem::Function* ep) { |
| for (auto* var : func->DirectlyReferencedGlobals()) { |
| if (var->AddressSpace() != ast::AddressSpace::kPushConstant || |
| var == push_constant_var) { |
| continue; |
| } |
| |
| if (push_constant_var == nullptr) { |
| push_constant_var = var; |
| push_constant_func = func; |
| continue; |
| } |
| |
| AddError("entry point '" + symbols_.NameFor(ep->Declaration()->symbol) + |
| "' uses two different 'push_constant' variables.", |
| ep->Declaration()->source); |
| AddNote("first 'push_constant' variable declaration is here", |
| var->Declaration()->source); |
| if (func != ep) { |
| TraverseCallChain(diagnostics_, ep, func, [&](const sem::Function* f) { |
| AddNote("called by function '" + |
| symbols_.NameFor(f->Declaration()->symbol) + "'", |
| f->Declaration()->source); |
| }); |
| AddNote("called by entry point '" + |
| symbols_.NameFor(ep->Declaration()->symbol) + "'", |
| ep->Declaration()->source); |
| } |
| AddNote("second 'push_constant' variable declaration is here", |
| push_constant_var->Declaration()->source); |
| if (push_constant_func != ep) { |
| TraverseCallChain( |
| diagnostics_, ep, push_constant_func, [&](const sem::Function* f) { |
| AddNote("called by function '" + |
| symbols_.NameFor(f->Declaration()->symbol) + "'", |
| f->Declaration()->source); |
| }); |
| AddNote("called by entry point '" + |
| symbols_.NameFor(ep->Declaration()->symbol) + "'", |
| ep->Declaration()->source); |
| } |
| return false; |
| } |
| |
| return true; |
| }; |
| |
| if (!check_push_constant(entry_point, entry_point)) { |
| return false; |
| } |
| for (auto* func : entry_point->TransitivelyCalledFunctions()) { |
| if (!check_push_constant(func, entry_point)) { |
| return false; |
| } |
| } |
| } |
| |
| return true; |
| } |
| |
| bool Validator::Array(const sem::Array* arr, const Source& el_source) const { |
| auto* el_ty = arr->ElemType(); |
| |
| if (!IsPlain(el_ty)) { |
| AddError(sem_.TypeNameOf(el_ty) + " cannot be used as an element type of an array", |
| el_source); |
| return false; |
| } |
| |
| if (!IsFixedFootprint(el_ty)) { |
| AddError("an array element type cannot contain a runtime-sized array", el_source); |
| return false; |
| } |
| |
| if (IsArrayWithOverrideCount(el_ty)) { |
| RaiseArrayWithOverrideCountError(el_source); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool Validator::ArrayStrideAttribute(const ast::StrideAttribute* attr, |
| uint32_t el_size, |
| uint32_t el_align) const { |
| auto stride = attr->stride; |
| bool is_valid_stride = (stride >= el_size) && (stride >= el_align) && (stride % el_align == 0); |
| if (!is_valid_stride) { |
| // https://gpuweb.github.io/gpuweb/wgsl/#array-layout-rules |
| // Arrays decorated with the stride attribute must have a stride that is |
| // at least the size of the element type, and be a multiple of the |
| // element type's alignment value. |
| AddError( |
| "arrays decorated with the stride attribute must have a stride that is at least the " |
| "size of the element type, and be a multiple of the element type's alignment value", |
| attr->source); |
| return false; |
| } |
| return true; |
| } |
| |
| bool Validator::Alias(const ast::Alias*) const { |
| return true; |
| } |
| |
| bool Validator::Structure(const sem::Struct* str, ast::PipelineStage stage) const { |
| if (str->Members().IsEmpty()) { |
| AddError("structures must have at least one member", str->Source()); |
| return false; |
| } |
| |
| utils::Hashset<uint32_t, 8> locations; |
| for (auto* member : str->Members()) { |
| if (auto* r = member->Type()->As<sem::Array>()) { |
| if (r->Count()->Is<type::RuntimeArrayCount>()) { |
| if (member != str->Members().Back()) { |
| AddError("runtime arrays may only appear as the last member of a struct", |
| member->Source()); |
| return false; |
| } |
| } |
| |
| if (IsArrayWithOverrideCount(member->Type())) { |
| RaiseArrayWithOverrideCountError(member->Declaration()->type->source); |
| return false; |
| } |
| } else if (!IsFixedFootprint(member->Type())) { |
| AddError( |
| "a struct that contains a runtime array cannot be nested inside another struct", |
| member->Source()); |
| return false; |
| } |
| |
| auto has_location = false; |
| auto has_position = false; |
| const ast::InvariantAttribute* invariant_attribute = nullptr; |
| const ast::InterpolateAttribute* interpolate_attribute = nullptr; |
| for (auto* attr : member->Declaration()->attributes) { |
| bool ok = Switch( |
| attr, // |
| [&](const ast::InvariantAttribute* invariant) { |
| invariant_attribute = invariant; |
| return true; |
| }, |
| [&](const ast::LocationAttribute* location) { |
| has_location = true; |
| TINT_ASSERT(Resolver, member->Location().has_value()); |
| if (!LocationAttribute(location, member->Location().value(), member->Type(), |
| locations, stage, member->Source())) { |
| return false; |
| } |
| return true; |
| }, |
| [&](const ast::BuiltinAttribute* builtin) { |
| if (!BuiltinAttribute(builtin, member->Type(), stage, |
| /* is_input */ false)) { |
| return false; |
| } |
| if (builtin->builtin == ast::BuiltinValue::kPosition) { |
| has_position = true; |
| } |
| return true; |
| }, |
| [&](const ast::InterpolateAttribute* interpolate) { |
| interpolate_attribute = interpolate; |
| if (!InterpolateAttribute(interpolate, member->Type())) { |
| return false; |
| } |
| return true; |
| }, |
| [&](const ast::StructMemberSizeAttribute*) { |
| if (!member->Type()->HasCreationFixedFootprint()) { |
| AddError( |
| "@size can only be applied to members where the member's type size " |
| "can be fully determined at shader creation time", |
| attr->source); |
| return false; |
| } |
| return true; |
| }, |
| [&](Default) { |
| if (!attr->IsAnyOf<ast::BuiltinAttribute, // |
| ast::InternalAttribute, // |
| ast::InterpolateAttribute, // |
| ast::InvariantAttribute, // |
| ast::LocationAttribute, // |
| ast::StructMemberOffsetAttribute, // |
| ast::StructMemberAlignAttribute>()) { |
| if (attr->Is<ast::StrideAttribute>() && |
| IsValidationDisabled(member->Declaration()->attributes, |
| ast::DisabledValidation::kIgnoreStrideAttribute)) { |
| return true; |
| } |
| AddError("attribute is not valid for structure members", attr->source); |
| return false; |
| } |
| return true; |
| }); |
| if (!ok) { |
| return false; |
| } |
| } |
| |
| if (invariant_attribute && !has_position) { |
| AddError("invariant attribute must only be applied to a position builtin", |
| invariant_attribute->source); |
| return false; |
| } |
| |
| if (interpolate_attribute && !has_location) { |
| AddError("interpolate attribute must only be used with @location", |
| interpolate_attribute->source); |
| return false; |
| } |
| } |
| |
| for (auto* attr : str->Declaration()->attributes) { |
| if (!(attr->IsAnyOf<ast::InternalAttribute>())) { |
| AddError("attribute is not valid for struct declarations", attr->source); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| bool Validator::LocationAttribute(const ast::LocationAttribute* loc_attr, |
| uint32_t location, |
| const type::Type* type, |
| utils::Hashset<uint32_t, 8>& locations, |
| ast::PipelineStage stage, |
| const Source& source, |
| const bool is_input) const { |
| std::string inputs_or_output = is_input ? "inputs" : "output"; |
| if (stage == ast::PipelineStage::kCompute) { |
| AddError("attribute is not valid for compute shader " + inputs_or_output, loc_attr->source); |
| return false; |
| } |
| |
| if (!type->is_numeric_scalar_or_vector()) { |
| std::string invalid_type = sem_.TypeNameOf(type); |
| AddError("cannot apply 'location' attribute to declaration of type '" + invalid_type + "'", |
| source); |
| AddNote( |
| "'location' attribute must only be applied to declarations of numeric scalar or " |
| "numeric vector type", |
| loc_attr->source); |
| return false; |
| } |
| |
| if (!locations.Add(location)) { |
| AddError(attr_to_str(loc_attr, location) + " attribute appears multiple times", |
| loc_attr->source); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool Validator::Return(const ast::ReturnStatement* ret, |
| const type::Type* func_type, |
| const type::Type* ret_type, |
| sem::Statement* current_statement) const { |
| if (func_type->UnwrapRef() != ret_type) { |
| AddError("return statement type must match its function return type, returned '" + |
| sem_.TypeNameOf(ret_type) + "', expected '" + sem_.TypeNameOf(func_type) + "'", |
| ret->source); |
| return false; |
| } |
| |
| auto* sem = sem_.Get(ret); |
| if (auto* continuing = ClosestContinuing(/*stop_at_loop*/ false, current_statement)) { |
| AddError("continuing blocks must not contain a return statement", ret->source); |
| if (continuing != sem->Declaration() && continuing != sem->Parent()->Declaration()) { |
| AddNote("see continuing block here", continuing->source); |
| } |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool Validator::SwitchStatement(const ast::SwitchStatement* s) { |
| auto* cond_ty = sem_.TypeOf(s->condition)->UnwrapRef(); |
| if (!cond_ty->is_integer_scalar()) { |
| AddError("switch statement selector expression must be of a scalar integer type", |
| s->condition->source); |
| return false; |
| } |
| |
| const sem::CaseSelector* default_selector = nullptr; |
| utils::Hashmap<int64_t, Source, 4> selectors; |
| |
| for (auto* case_stmt : s->body) { |
| auto* case_sem = sem_.Get<sem::CaseStatement>(case_stmt); |
| for (auto* selector : case_sem->Selectors()) { |
| if (selector->IsDefault()) { |
| if (default_selector != nullptr) { |
| // More than one default clause |
| AddError("switch statement must have exactly one default clause", |
| selector->Declaration()->source); |
| |
| AddNote("previous default case", default_selector->Declaration()->source); |
| return false; |
| } |
| default_selector = selector; |
| continue; |
| } |
| |
| auto* decl_ty = selector->Value()->Type(); |
| if (cond_ty != decl_ty) { |
| AddError( |
| "the case selector values must have the same type as the selector expression.", |
| selector->Declaration()->source); |
| return false; |
| } |
| |
| auto value = selector->Value()->As<uint32_t>(); |
| if (auto added = selectors.Add(value, selector->Declaration()->source); !added) { |
| AddError("duplicate switch case '" + |
| (decl_ty->IsAnyOf<sem::I32, type::AbstractNumeric>() |
| ? std::to_string(i32(value)) |
| : std::to_string(value)) + |
| "'", |
| selector->Declaration()->source); |
| AddNote("previous case declared here", *added.value); |
| return false; |
| } |
| } |
| } |
| |
| if (default_selector == nullptr) { |
| // No default clause |
| AddError("switch statement must have a default clause", s->source); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool Validator::Assignment(const ast::Statement* a, const type::Type* rhs_ty) const { |
| const ast::Expression* lhs; |
| const ast::Expression* rhs; |
| if (auto* assign = a->As<ast::AssignmentStatement>()) { |
| lhs = assign->lhs; |
| rhs = assign->rhs; |
| } else if (auto* compound = a->As<ast::CompoundAssignmentStatement>()) { |
| lhs = compound->lhs; |
| rhs = compound->rhs; |
| } else { |
| TINT_ICE(Resolver, diagnostics_) << "invalid assignment statement"; |
| return false; |
| } |
| |
| if (lhs->Is<ast::PhonyExpression>()) { |
| // https://www.w3.org/TR/WGSL/#phony-assignment-section |
| auto* ty = rhs_ty->UnwrapRef(); |
| if (!ty->IsConstructible() && |
| !ty->IsAnyOf<sem::Pointer, type::Texture, type::Sampler, type::AbstractNumeric>()) { |
| AddError("cannot assign '" + sem_.TypeNameOf(rhs_ty) + |
| "' to '_'. '_' can only be assigned a constructible, pointer, texture or " |
| "sampler type", |
| rhs->source); |
| return false; |
| } |
| return true; // RHS can be anything. |
| } |
| |
| // https://gpuweb.github.io/gpuweb/wgsl/#assignment-statement |
| auto const* lhs_ty = sem_.TypeOf(lhs); |
| |
| if (auto* variable = sem_.ResolvedSymbol<sem::Variable>(lhs)) { |
| auto* v = variable->Declaration(); |
| const char* err = Switch( |
| v, // |
| [&](const ast::Parameter*) { return "cannot assign to function parameter"; }, |
| [&](const ast::Let*) { return "cannot assign to 'let'"; }, |
| [&](const ast::Override*) { return "cannot assign to 'override'"; }); |
| if (err) { |
| AddError(err, lhs->source); |
| AddNote("'" + symbols_.NameFor(v->symbol) + "' is declared here:", v->source); |
| return false; |
| } |
| } |
| |
| auto* lhs_ref = lhs_ty->As<sem::Reference>(); |
| if (!lhs_ref) { |
| // LHS is not a reference, so it has no storage. |
| AddError("cannot assign to value of type '" + sem_.TypeNameOf(lhs_ty) + "'", lhs->source); |
| return false; |
| } |
| |
| auto* storage_ty = lhs_ref->StoreType(); |
| auto* value_type = rhs_ty->UnwrapRef(); // Implicit load of RHS |
| |
| // Value type has to match storage type |
| if (storage_ty != value_type) { |
| AddError( |
| "cannot assign '" + sem_.TypeNameOf(rhs_ty) + "' to '" + sem_.TypeNameOf(lhs_ty) + "'", |
| a->source); |
| return false; |
| } |
| if (!storage_ty->IsConstructible()) { |
| AddError("storage type of assignment must be constructible", a->source); |
| return false; |
| } |
| if (lhs_ref->Access() == ast::Access::kRead) { |
| AddError("cannot store into a read-only type '" + sem_.RawTypeNameOf(lhs_ty) + "'", |
| a->source); |
| return false; |
| } |
| return true; |
| } |
| |
| bool Validator::IncrementDecrementStatement(const ast::IncrementDecrementStatement* inc) const { |
| const ast::Expression* lhs = inc->lhs; |
| |
| // https://gpuweb.github.io/gpuweb/wgsl/#increment-decrement |
| |
| if (auto* variable = sem_.ResolvedSymbol<sem::Variable>(lhs)) { |
| auto* v = variable->Declaration(); |
| const char* err = Switch( |
| v, // |
| [&](const ast::Parameter*) { return "cannot modify function parameter"; }, |
| [&](const ast::Let*) { return "cannot modify 'let'"; }, |
| [&](const ast::Override*) { return "cannot modify 'override'"; }); |
| if (err) { |
| AddError(err, lhs->source); |
| AddNote("'" + symbols_.NameFor(v->symbol) + "' is declared here:", v->source); |
| return false; |
| } |
| } |
| |
| auto const* lhs_ty = sem_.TypeOf(lhs); |
| auto* lhs_ref = lhs_ty->As<sem::Reference>(); |
| if (!lhs_ref) { |
| // LHS is not a reference, so it has no storage. |
| AddError("cannot modify value of type '" + sem_.TypeNameOf(lhs_ty) + "'", lhs->source); |
| return false; |
| } |
| |
| if (!lhs_ref->StoreType()->is_integer_scalar()) { |
| const std::string kind = inc->increment ? "increment" : "decrement"; |
| AddError(kind + " statement can only be applied to an integer scalar", lhs->source); |
| return false; |
| } |
| |
| if (lhs_ref->Access() == ast::Access::kRead) { |
| AddError("cannot modify read-only type '" + sem_.RawTypeNameOf(lhs_ty) + "'", inc->source); |
| return false; |
| } |
| return true; |
| } |
| |
| bool Validator::NoDuplicateAttributes(utils::VectorRef<const ast::Attribute*> attributes) const { |
| utils::Hashmap<const TypeInfo*, Source, 8> seen; |
| for (auto* d : attributes) { |
| auto added = seen.Add(&d->TypeInfo(), d->source); |
| if (!added && !d->Is<ast::InternalAttribute>()) { |
| AddError("duplicate " + d->Name() + " attribute", d->source); |
| AddNote("first attribute declared here", *added.value); |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| bool Validator::IsValidationDisabled(utils::VectorRef<const ast::Attribute*> attributes, |
| ast::DisabledValidation validation) const { |
| for (auto* attribute : attributes) { |
| if (auto* dv = attribute->As<ast::DisableValidationAttribute>()) { |
| if (dv->validation == validation) { |
| return true; |
| } |
| } |
| } |
| return false; |
| } |
| |
| bool Validator::IsValidationEnabled(utils::VectorRef<const ast::Attribute*> attributes, |
| ast::DisabledValidation validation) const { |
| return !IsValidationDisabled(attributes, validation); |
| } |
| |
| bool Validator::IsArrayWithOverrideCount(const type::Type* ty) const { |
| if (auto* arr = ty->UnwrapRef()->As<sem::Array>()) { |
| if (arr->Count()->IsAnyOf<sem::NamedOverrideArrayCount, sem::UnnamedOverrideArrayCount>()) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| void Validator::RaiseArrayWithOverrideCountError(const Source& source) const { |
| AddError( |
| "array with an 'override' element count can only be used as the store type of a " |
| "'var<workgroup>'", |
| source); |
| } |
| |
| std::string Validator::VectorPretty(uint32_t size, const type::Type* element_type) const { |
| sem::Vector vec_type(element_type, size); |
| return vec_type.FriendlyName(symbols_); |
| } |
| |
| bool Validator::CheckTypeAccessAddressSpace( |
| const type::Type* store_ty, |
| ast::Access access, |
| ast::AddressSpace address_space, |
| utils::VectorRef<const tint::ast::Attribute*> attributes, |
| const Source& source) const { |
| if (!AddressSpaceLayout(store_ty, address_space, source)) { |
| return false; |
| } |
| |
| if (address_space == ast::AddressSpace::kPushConstant && |
| !enabled_extensions_.Contains(ast::Extension::kChromiumExperimentalPushConstant) && |
| IsValidationEnabled(attributes, ast::DisabledValidation::kIgnoreAddressSpace)) { |
| AddError( |
| "use of variable address space 'push_constant' requires enabling extension " |
| "'chromium_experimental_push_constant'", |
| source); |
| return false; |
| } |
| |
| if (address_space == ast::AddressSpace::kStorage && access == ast::Access::kWrite) { |
| // The access mode for the storage address space can only be 'read' or |
| // 'read_write'. |
| AddError("access mode 'write' is not valid for the 'storage' address space", source); |
| return false; |
| } |
| |
| auto atomic_error = [&]() -> const char* { |
| if (address_space != ast::AddressSpace::kStorage && |
| address_space != ast::AddressSpace::kWorkgroup) { |
| return "atomic variables must have <storage> or <workgroup> address space"; |
| } |
| if (address_space == ast::AddressSpace::kStorage && access != ast::Access::kReadWrite) { |
| return "atomic variables in <storage> address space must have read_write access " |
| "mode"; |
| } |
| return nullptr; |
| }; |
| |
| auto check_sub_atomics = [&] { |
| if (auto atomic_use = atomic_composite_info_.Get(store_ty)) { |
| if (auto* err = atomic_error()) { |
| AddError(err, source); |
| AddNote("atomic sub-type of '" + sem_.TypeNameOf(store_ty) + "' is declared here", |
| **atomic_use); |
| return false; |
| } |
| } |
| return true; |
| }; |
| |
| return Switch( |
| store_ty, // |
| [&](const sem::Atomic*) { |
| if (auto* err = atomic_error()) { |
| AddError(err, source); |
| return false; |
| } |
| return true; |
| }, |
| [&](const sem::Struct*) { return check_sub_atomics(); }, // |
| [&](const sem::Array*) { return check_sub_atomics(); }, // |
| [&](Default) { return true; }); |
| } |
| |
| } // namespace tint::resolver |