| // Copyright 2023 The Dawn & Tint Authors |
| // |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are met: |
| // |
| // 1. Redistributions of source code must retain the above copyright notice, this |
| // list of conditions and the following disclaimer. |
| // |
| // 2. Redistributions in binary form must reproduce the above copyright notice, |
| // this list of conditions and the following disclaimer in the documentation |
| // and/or other materials provided with the distribution. |
| // |
| // 3. Neither the name of the copyright holder nor the names of its |
| // contributors may be used to endorse or promote products derived from |
| // this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| // DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| // FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| // DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| // CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| // OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| #include "src/tint/lang/spirv/writer/printer/printer.h" |
| |
| #include <utility> |
| |
| #include "spirv/unified1/GLSL.std.450.h" |
| #include "spirv/unified1/spirv.h" |
| |
| #include "src/tint/lang/core/address_space.h" |
| #include "src/tint/lang/core/builtin_value.h" |
| #include "src/tint/lang/core/constant/scalar.h" |
| #include "src/tint/lang/core/constant/splat.h" |
| #include "src/tint/lang/core/constant/value.h" |
| #include "src/tint/lang/core/fluent_types.h" |
| #include "src/tint/lang/core/ir/access.h" |
| #include "src/tint/lang/core/ir/binary.h" |
| #include "src/tint/lang/core/ir/bitcast.h" |
| #include "src/tint/lang/core/ir/block.h" |
| #include "src/tint/lang/core/ir/block_param.h" |
| #include "src/tint/lang/core/ir/break_if.h" |
| #include "src/tint/lang/core/ir/builder.h" |
| #include "src/tint/lang/core/ir/constant.h" |
| #include "src/tint/lang/core/ir/construct.h" |
| #include "src/tint/lang/core/ir/continue.h" |
| #include "src/tint/lang/core/ir/convert.h" |
| #include "src/tint/lang/core/ir/core_builtin_call.h" |
| #include "src/tint/lang/core/ir/exit_if.h" |
| #include "src/tint/lang/core/ir/exit_loop.h" |
| #include "src/tint/lang/core/ir/exit_switch.h" |
| #include "src/tint/lang/core/ir/if.h" |
| #include "src/tint/lang/core/ir/let.h" |
| #include "src/tint/lang/core/ir/load.h" |
| #include "src/tint/lang/core/ir/load_vector_element.h" |
| #include "src/tint/lang/core/ir/loop.h" |
| #include "src/tint/lang/core/ir/module.h" |
| #include "src/tint/lang/core/ir/multi_in_block.h" |
| #include "src/tint/lang/core/ir/next_iteration.h" |
| #include "src/tint/lang/core/ir/return.h" |
| #include "src/tint/lang/core/ir/store.h" |
| #include "src/tint/lang/core/ir/store_vector_element.h" |
| #include "src/tint/lang/core/ir/switch.h" |
| #include "src/tint/lang/core/ir/swizzle.h" |
| #include "src/tint/lang/core/ir/terminate_invocation.h" |
| #include "src/tint/lang/core/ir/terminator.h" |
| #include "src/tint/lang/core/ir/unreachable.h" |
| #include "src/tint/lang/core/ir/user_call.h" |
| #include "src/tint/lang/core/ir/validator.h" |
| #include "src/tint/lang/core/ir/var.h" |
| #include "src/tint/lang/core/texel_format.h" |
| #include "src/tint/lang/core/type/array.h" |
| #include "src/tint/lang/core/type/atomic.h" |
| #include "src/tint/lang/core/type/bool.h" |
| #include "src/tint/lang/core/type/depth_multisampled_texture.h" |
| #include "src/tint/lang/core/type/depth_texture.h" |
| #include "src/tint/lang/core/type/f16.h" |
| #include "src/tint/lang/core/type/f32.h" |
| #include "src/tint/lang/core/type/i32.h" |
| #include "src/tint/lang/core/type/matrix.h" |
| #include "src/tint/lang/core/type/multisampled_texture.h" |
| #include "src/tint/lang/core/type/pointer.h" |
| #include "src/tint/lang/core/type/sampled_texture.h" |
| #include "src/tint/lang/core/type/sampler.h" |
| #include "src/tint/lang/core/type/storage_texture.h" |
| #include "src/tint/lang/core/type/struct.h" |
| #include "src/tint/lang/core/type/texture.h" |
| #include "src/tint/lang/core/type/type.h" |
| #include "src/tint/lang/core/type/u32.h" |
| #include "src/tint/lang/core/type/vector.h" |
| #include "src/tint/lang/core/type/void.h" |
| #include "src/tint/lang/spirv/ir/builtin_call.h" |
| #include "src/tint/lang/spirv/ir/literal_operand.h" |
| #include "src/tint/lang/spirv/type/sampled_image.h" |
| #include "src/tint/lang/spirv/writer/ast_printer/ast_printer.h" |
| #include "src/tint/lang/spirv/writer/common/binary_writer.h" |
| #include "src/tint/lang/spirv/writer/common/function.h" |
| #include "src/tint/lang/spirv/writer/common/module.h" |
| #include "src/tint/lang/spirv/writer/raise/builtin_polyfill.h" |
| #include "src/tint/utils/containers/hashmap.h" |
| #include "src/tint/utils/containers/vector.h" |
| #include "src/tint/utils/diagnostic/diagnostic.h" |
| #include "src/tint/utils/macros/scoped_assignment.h" |
| #include "src/tint/utils/result/result.h" |
| #include "src/tint/utils/rtti/switch.h" |
| #include "src/tint/utils/symbol/symbol.h" |
| |
| using namespace tint::core::fluent_types; // NOLINT |
| using namespace tint::core::number_suffixes; // NOLINT |
| |
| namespace tint::spirv::writer { |
| namespace { |
| |
| constexpr uint32_t kWriterVersion = 1; |
| |
| SpvStorageClass StorageClass(core::AddressSpace addrspace) { |
| switch (addrspace) { |
| case core::AddressSpace::kHandle: |
| return SpvStorageClassUniformConstant; |
| case core::AddressSpace::kFunction: |
| return SpvStorageClassFunction; |
| case core::AddressSpace::kIn: |
| return SpvStorageClassInput; |
| case core::AddressSpace::kPrivate: |
| return SpvStorageClassPrivate; |
| case core::AddressSpace::kPushConstant: |
| return SpvStorageClassPushConstant; |
| case core::AddressSpace::kOut: |
| return SpvStorageClassOutput; |
| case core::AddressSpace::kStorage: |
| return SpvStorageClassStorageBuffer; |
| case core::AddressSpace::kUniform: |
| return SpvStorageClassUniform; |
| case core::AddressSpace::kWorkgroup: |
| return SpvStorageClassWorkgroup; |
| default: |
| return SpvStorageClassMax; |
| } |
| } |
| |
| const core::type::Type* DedupType(const core::type::Type* ty, core::type::Manager& types) { |
| return Switch( |
| ty, |
| |
| // Atomics are not a distinct type in SPIR-V. |
| [&](const core::type::Atomic* atomic) { return atomic->Type(); }, |
| |
| // Depth textures are always declared as sampled textures. |
| [&](const core::type::DepthTexture* depth) { |
| return types.Get<core::type::SampledTexture>(depth->dim(), types.f32()); |
| }, |
| [&](const core::type::DepthMultisampledTexture* depth) { |
| return types.Get<core::type::MultisampledTexture>(depth->dim(), types.f32()); |
| }, |
| |
| // Both sampler types are the same in SPIR-V. |
| [&](const core::type::Sampler* s) -> const core::type::Type* { |
| if (s->IsComparison()) { |
| return types.Get<core::type::Sampler>(core::type::SamplerKind::kSampler); |
| } |
| return s; |
| }, |
| |
| // Dedup a SampledImage if its underlying image will be deduped. |
| [&](const type::SampledImage* si) -> const core::type::Type* { |
| auto* img = DedupType(si->Image(), types); |
| if (img != si->Image()) { |
| return types.Get<type::SampledImage>(img); |
| } |
| return si; |
| }, |
| |
| [&](Default) { return ty; }); |
| } |
| |
| /// PIMPL class for SPIR-V writer |
| class Printer { |
| public: |
| /// Constructor |
| /// @param module the Tint IR module to generate |
| /// @param zero_init_workgroup_memory `true` to initialize all the variables in the Workgroup |
| /// storage class with OpConstantNull |
| Printer(core::ir::Module& module, bool zero_init_workgroup_memory) |
| : ir_(module), b_(module), zero_init_workgroup_memory_(zero_init_workgroup_memory) {} |
| |
| /// @returns the generated SPIR-V code on success, or failure |
| Result<std::vector<uint32_t>> Code() { |
| if (auto res = Generate(); !res) { |
| return res.Failure(); |
| } |
| |
| // Serialize the module into binary SPIR-V. |
| BinaryWriter writer; |
| writer.WriteHeader(module_.IdBound(), kWriterVersion); |
| writer.WriteModule(module_); |
| return std::move(writer.Result()); |
| } |
| |
| /// @returns the generated SPIR-V module on success, or failure |
| Result<writer::Module> Module() { |
| if (auto res = Generate(); !res) { |
| return res.Failure(); |
| } |
| |
| // Serialize the module into binary SPIR-V. |
| BinaryWriter writer; |
| writer.WriteHeader(module_.IdBound(), kWriterVersion); |
| writer.WriteModule(module_); |
| module_.Code() = std::move(writer.Result()); |
| return module_; |
| } |
| |
| private: |
| core::ir::Module& ir_; |
| core::ir::Builder b_; |
| writer::Module module_; |
| BinaryWriter writer_; |
| |
| /// A function type used for an OpTypeFunction declaration. |
| struct FunctionType { |
| uint32_t return_type_id; |
| Vector<uint32_t, 4> param_type_ids; |
| |
| /// Hasher provides a hash function for the FunctionType. |
| struct Hasher { |
| /// @param ft the FunctionType to create a hash for |
| /// @return the hash value |
| inline std::size_t operator()(const FunctionType& ft) const { |
| size_t hash = Hash(ft.return_type_id); |
| for (auto& p : ft.param_type_ids) { |
| hash = HashCombine(hash, p); |
| } |
| return hash; |
| } |
| }; |
| |
| /// Equality operator for FunctionType. |
| bool operator==(const FunctionType& other) const { |
| return (param_type_ids == other.param_type_ids) && |
| (return_type_id == other.return_type_id); |
| } |
| }; |
| |
| /// The map of types to their result IDs. |
| Hashmap<const core::type::Type*, uint32_t, 8> types_; |
| |
| /// The map of function types to their result IDs. |
| Hashmap<FunctionType, uint32_t, 8, FunctionType::Hasher> function_types_; |
| |
| /// The map of constants to their result IDs. |
| Hashmap<const core::constant::Value*, uint32_t, 16> constants_; |
| |
| /// The map of types to the result IDs of their OpConstantNull instructions. |
| Hashmap<const core::type::Type*, uint32_t, 4> constant_nulls_; |
| |
| /// The map of types to the result IDs of their OpUndef instructions. |
| Hashmap<const core::type::Type*, uint32_t, 4> undef_values_; |
| |
| /// The map of non-constant values to their result IDs. |
| Hashmap<core::ir::Value*, uint32_t, 8> values_; |
| |
| /// The map of blocks to the IDs of their label instructions. |
| Hashmap<core::ir::Block*, uint32_t, 8> block_labels_; |
| |
| /// The map of control instructions to the IDs of the label of their SPIR-V merge blocks. |
| Hashmap<core::ir::ControlInstruction*, uint32_t, 8> merge_block_labels_; |
| |
| /// The map of extended instruction set names to their result IDs. |
| Hashmap<std::string_view, uint32_t, 2> imports_; |
| |
| /// The current function that is being emitted. |
| Function current_function_; |
| |
| /// The merge block for the current if statement |
| uint32_t if_merge_label_ = 0; |
| |
| /// The header block for the current loop statement |
| uint32_t loop_header_label_ = 0; |
| |
| /// The merge block for the current loop statement |
| uint32_t loop_merge_label_ = 0; |
| |
| /// The merge block for the current switch statement |
| uint32_t switch_merge_label_ = 0; |
| |
| bool zero_init_workgroup_memory_ = false; |
| |
| /// Builds the SPIR-V from the IR |
| Result<SuccessType> Generate() { |
| auto valid = core::ir::ValidateAndDumpIfNeeded(ir_, "SPIR-V writer"); |
| if (!valid) { |
| return valid.Failure(); |
| } |
| |
| module_.PushCapability(SpvCapabilityShader); |
| module_.PushMemoryModel(spv::Op::OpMemoryModel, {U32Operand(SpvAddressingModelLogical), |
| U32Operand(SpvMemoryModelGLSL450)}); |
| |
| // Emit module-scope declarations. |
| EmitRootBlock(ir_.root_block); |
| |
| // Emit functions. |
| for (auto* func : ir_.functions) { |
| EmitFunction(func); |
| } |
| |
| return Success; |
| } |
| |
| /// Convert a builtin to the corresponding SPIR-V enum value, taking into account the target |
| /// address space. Adds any capabilities needed for the builtin. |
| /// @param builtin the builtin to convert |
| /// @param addrspace the address space the builtin is being used in |
| /// @returns the enum value of the corresponding SPIR-V builtin |
| uint32_t Builtin(core::BuiltinValue builtin, core::AddressSpace addrspace) { |
| switch (builtin) { |
| case core::BuiltinValue::kPointSize: |
| return SpvBuiltInPointSize; |
| case core::BuiltinValue::kFragDepth: |
| return SpvBuiltInFragDepth; |
| case core::BuiltinValue::kFrontFacing: |
| return SpvBuiltInFrontFacing; |
| case core::BuiltinValue::kGlobalInvocationId: |
| return SpvBuiltInGlobalInvocationId; |
| case core::BuiltinValue::kInstanceIndex: |
| return SpvBuiltInInstanceIndex; |
| case core::BuiltinValue::kLocalInvocationId: |
| return SpvBuiltInLocalInvocationId; |
| case core::BuiltinValue::kLocalInvocationIndex: |
| return SpvBuiltInLocalInvocationIndex; |
| case core::BuiltinValue::kNumWorkgroups: |
| return SpvBuiltInNumWorkgroups; |
| case core::BuiltinValue::kPosition: |
| if (addrspace == core::AddressSpace::kOut) { |
| // Vertex output. |
| return SpvBuiltInPosition; |
| } else { |
| // Fragment input. |
| return SpvBuiltInFragCoord; |
| } |
| case core::BuiltinValue::kSampleIndex: |
| module_.PushCapability(SpvCapabilitySampleRateShading); |
| return SpvBuiltInSampleId; |
| case core::BuiltinValue::kSampleMask: |
| return SpvBuiltInSampleMask; |
| case core::BuiltinValue::kSubgroupInvocationId: |
| module_.PushCapability(SpvCapabilityGroupNonUniform); |
| return SpvBuiltInSubgroupLocalInvocationId; |
| case core::BuiltinValue::kSubgroupSize: |
| module_.PushCapability(SpvCapabilityGroupNonUniform); |
| return SpvBuiltInSubgroupSize; |
| case core::BuiltinValue::kVertexIndex: |
| return SpvBuiltInVertexIndex; |
| case core::BuiltinValue::kWorkgroupId: |
| return SpvBuiltInWorkgroupId; |
| case core::BuiltinValue::kUndefined: |
| return SpvBuiltInMax; |
| } |
| return SpvBuiltInMax; |
| } |
| |
| /// Get the result ID of the constant `constant`, emitting its instruction if necessary. |
| /// @param constant the constant to get the ID for |
| /// @returns the result ID of the constant |
| uint32_t Constant(core::ir::Constant* constant) { |
| // If it is a literal operand, just return the value. |
| if (auto* literal = constant->As<spirv::ir::LiteralOperand>()) { |
| return literal->Value()->ValueAs<uint32_t>(); |
| } |
| |
| auto id = Constant(constant->Value()); |
| |
| // Set the name for the SPIR-V result ID if provided in the module. |
| if (auto name = ir_.NameOf(constant)) { |
| module_.PushDebug(spv::Op::OpName, {id, Operand(name.Name())}); |
| } |
| |
| return id; |
| } |
| |
| /// Get the result ID of the constant `constant`, emitting its instruction if necessary. |
| /// @param constant the constant to get the ID for |
| /// @returns the result ID of the constant |
| uint32_t Constant(const core::constant::Value* constant) { |
| return constants_.GetOrCreate(constant, [&] { |
| auto* ty = constant->Type(); |
| |
| // Use OpConstantNull for zero-valued composite constants. |
| if (!ty->Is<core::type::Scalar>() && constant->AllZero()) { |
| return ConstantNull(ty); |
| } |
| |
| auto id = module_.NextId(); |
| Switch( |
| ty, // |
| [&](const core::type::Bool*) { |
| module_.PushType(constant->ValueAs<bool>() ? spv::Op::OpConstantTrue |
| : spv::Op::OpConstantFalse, |
| {Type(ty), id}); |
| }, |
| [&](const core::type::I32*) { |
| module_.PushType(spv::Op::OpConstant, {Type(ty), id, constant->ValueAs<u32>()}); |
| }, |
| [&](const core::type::U32*) { |
| module_.PushType(spv::Op::OpConstant, |
| {Type(ty), id, U32Operand(constant->ValueAs<i32>())}); |
| }, |
| [&](const core::type::F32*) { |
| module_.PushType(spv::Op::OpConstant, {Type(ty), id, constant->ValueAs<f32>()}); |
| }, |
| [&](const core::type::F16*) { |
| module_.PushType( |
| spv::Op::OpConstant, |
| {Type(ty), id, U32Operand(constant->ValueAs<f16>().BitsRepresentation())}); |
| }, |
| [&](const core::type::Vector* vec) { |
| OperandList operands = {Type(ty), id}; |
| for (uint32_t i = 0; i < vec->Width(); i++) { |
| operands.push_back(Constant(constant->Index(i))); |
| } |
| module_.PushType(spv::Op::OpConstantComposite, operands); |
| }, |
| [&](const core::type::Matrix* mat) { |
| OperandList operands = {Type(ty), id}; |
| for (uint32_t i = 0; i < mat->columns(); i++) { |
| operands.push_back(Constant(constant->Index(i))); |
| } |
| module_.PushType(spv::Op::OpConstantComposite, operands); |
| }, |
| [&](const core::type::Array* arr) { |
| TINT_ASSERT(arr->ConstantCount()); |
| OperandList operands = {Type(ty), id}; |
| for (uint32_t i = 0; i < arr->ConstantCount(); i++) { |
| operands.push_back(Constant(constant->Index(i))); |
| } |
| module_.PushType(spv::Op::OpConstantComposite, operands); |
| }, |
| [&](const core::type::Struct* str) { |
| OperandList operands = {Type(ty), id}; |
| for (uint32_t i = 0; i < str->Members().Length(); i++) { |
| operands.push_back(Constant(constant->Index(i))); |
| } |
| module_.PushType(spv::Op::OpConstantComposite, operands); |
| }, // |
| TINT_ICE_ON_NO_MATCH); |
| return id; |
| }); |
| } |
| |
| /// Get the result ID of the OpConstantNull instruction for `type`, emitting it if necessary. |
| /// @param type the type to get the ID for |
| /// @returns the result ID of the OpConstantNull instruction |
| uint32_t ConstantNull(const core::type::Type* type) { |
| return constant_nulls_.GetOrCreate(type, [&] { |
| auto id = module_.NextId(); |
| module_.PushType(spv::Op::OpConstantNull, {Type(type), id}); |
| return id; |
| }); |
| } |
| |
| /// Get the result ID of the OpUndef instruction with type `ty`, emitting it if necessary. |
| /// @param type the type of the undef value |
| /// @returns the result ID of the instruction |
| uint32_t Undef(const core::type::Type* type) { |
| return undef_values_.GetOrCreate(type, [&] { |
| auto id = module_.NextId(); |
| module_.PushType(spv::Op::OpUndef, {Type(type), id}); |
| return id; |
| }); |
| } |
| |
| /// Get the result ID of the type `ty`, emitting a type declaration instruction if necessary. |
| /// @param ty the type to get the ID for |
| /// @returns the result ID of the type |
| uint32_t Type(const core::type::Type* ty) { |
| ty = DedupType(ty, ir_.Types()); |
| return types_.GetOrCreate(ty, [&] { |
| auto id = module_.NextId(); |
| Switch( |
| ty, // |
| [&](const core::type::Void*) { module_.PushType(spv::Op::OpTypeVoid, {id}); }, |
| [&](const core::type::Bool*) { module_.PushType(spv::Op::OpTypeBool, {id}); }, |
| [&](const core::type::I32*) { |
| module_.PushType(spv::Op::OpTypeInt, {id, 32u, 1u}); |
| }, |
| [&](const core::type::U32*) { |
| module_.PushType(spv::Op::OpTypeInt, {id, 32u, 0u}); |
| }, |
| [&](const core::type::F32*) { |
| module_.PushType(spv::Op::OpTypeFloat, {id, 32u}); |
| }, |
| [&](const core::type::F16*) { |
| module_.PushCapability(SpvCapabilityFloat16); |
| module_.PushCapability(SpvCapabilityUniformAndStorageBuffer16BitAccess); |
| module_.PushCapability(SpvCapabilityStorageBuffer16BitAccess); |
| module_.PushCapability(SpvCapabilityStorageInputOutput16); |
| module_.PushType(spv::Op::OpTypeFloat, {id, 16u}); |
| }, |
| [&](const core::type::Vector* vec) { |
| module_.PushType(spv::Op::OpTypeVector, {id, Type(vec->type()), vec->Width()}); |
| }, |
| [&](const core::type::Matrix* mat) { |
| module_.PushType(spv::Op::OpTypeMatrix, |
| {id, Type(mat->ColumnType()), mat->columns()}); |
| }, |
| [&](const core::type::Array* arr) { |
| if (arr->ConstantCount()) { |
| auto* count = b_.ConstantValue(u32(arr->ConstantCount().value())); |
| module_.PushType(spv::Op::OpTypeArray, |
| {id, Type(arr->ElemType()), Constant(count)}); |
| } else { |
| TINT_ASSERT(arr->Count()->Is<core::type::RuntimeArrayCount>()); |
| module_.PushType(spv::Op::OpTypeRuntimeArray, {id, Type(arr->ElemType())}); |
| } |
| module_.PushAnnot(spv::Op::OpDecorate, |
| {id, U32Operand(SpvDecorationArrayStride), arr->Stride()}); |
| }, |
| [&](const core::type::Pointer* ptr) { |
| module_.PushType(spv::Op::OpTypePointer, |
| {id, U32Operand(StorageClass(ptr->AddressSpace())), |
| Type(ptr->StoreType())}); |
| }, |
| [&](const core::type::Struct* str) { EmitStructType(id, str); }, |
| [&](const core::type::Texture* tex) { EmitTextureType(id, tex); }, |
| [&](const core::type::Sampler*) { module_.PushType(spv::Op::OpTypeSampler, {id}); }, |
| [&](const type::SampledImage* s) { |
| module_.PushType(spv::Op::OpTypeSampledImage, {id, Type(s->Image())}); |
| }, // |
| TINT_ICE_ON_NO_MATCH); |
| return id; |
| }); |
| } |
| |
| /// Get the result ID of the instruction result `value`, emitting its instruction if necessary. |
| /// @param inst the instruction to get the ID for |
| /// @returns the result ID of the instruction |
| uint32_t Value(core::ir::Instruction* inst) { return Value(inst->Result(0)); } |
| |
| /// Get the result ID of the value `value`, emitting its instruction if necessary. |
| /// @param value the value to get the ID for |
| /// @returns the result ID of the value |
| uint32_t Value(core::ir::Value* value) { |
| return Switch( |
| value, // |
| [&](core::ir::Constant* constant) { return Constant(constant); }, |
| [&](core::ir::Value*) { |
| return values_.GetOrCreate(value, [&] { return module_.NextId(); }); |
| }); |
| } |
| |
| /// Get the ID of the label for `block`. |
| /// @param block the block to get the label ID for |
| /// @returns the ID of the block's label |
| uint32_t Label(core::ir::Block* block) { |
| return block_labels_.GetOrCreate(block, [&] { return module_.NextId(); }); |
| } |
| |
| /// Emit a struct type. |
| /// @param id the result ID to use |
| /// @param str the struct type to emit |
| void EmitStructType(uint32_t id, const core::type::Struct* str) { |
| // Helper to return `type` or a potentially nested array element type within `type` as a |
| // matrix type, or nullptr if no such matrix type is present. |
| auto get_nested_matrix_type = [&](const core::type::Type* type) { |
| while (auto* arr = type->As<core::type::Array>()) { |
| type = arr->ElemType(); |
| } |
| return type->As<core::type::Matrix>(); |
| }; |
| |
| OperandList operands = {id}; |
| for (auto* member : str->Members()) { |
| operands.push_back(Type(member->Type())); |
| |
| // Generate struct member offset decoration. |
| module_.PushAnnot( |
| spv::Op::OpMemberDecorate, |
| {operands[0], member->Index(), U32Operand(SpvDecorationOffset), member->Offset()}); |
| |
| // Emit matrix layout decorations if necessary. |
| if (auto* matrix_type = get_nested_matrix_type(member->Type())) { |
| const uint32_t effective_row_count = (matrix_type->rows() == 2) ? 2 : 4; |
| module_.PushAnnot(spv::Op::OpMemberDecorate, |
| {id, member->Index(), U32Operand(SpvDecorationColMajor)}); |
| module_.PushAnnot(spv::Op::OpMemberDecorate, |
| {id, member->Index(), U32Operand(SpvDecorationMatrixStride), |
| Operand(effective_row_count * matrix_type->type()->Size())}); |
| } |
| |
| if (member->Name().IsValid()) { |
| module_.PushDebug(spv::Op::OpMemberName, |
| {operands[0], member->Index(), Operand(member->Name().Name())}); |
| } |
| } |
| module_.PushType(spv::Op::OpTypeStruct, std::move(operands)); |
| |
| // Add a Block decoration if necessary. |
| if (str->StructFlags().Contains(core::type::StructFlag::kBlock)) { |
| module_.PushAnnot(spv::Op::OpDecorate, {id, U32Operand(SpvDecorationBlock)}); |
| } |
| |
| if (str->Name().IsValid()) { |
| module_.PushDebug(spv::Op::OpName, {operands[0], Operand(str->Name().Name())}); |
| } |
| } |
| |
| /// Emit a texture type. |
| /// @param id the result ID to use |
| /// @param texture the texture type to emit |
| void EmitTextureType(uint32_t id, const core::type::Texture* texture) { |
| uint32_t sampled_type = Switch( |
| texture, // |
| [&](const core::type::SampledTexture* t) { return Type(t->type()); }, |
| [&](const core::type::MultisampledTexture* t) { return Type(t->type()); }, |
| [&](const core::type::StorageTexture* t) { return Type(t->type()); }, // |
| TINT_ICE_ON_NO_MATCH); |
| |
| uint32_t dim = SpvDimMax; |
| uint32_t array = 0u; |
| switch (texture->dim()) { |
| case core::type::TextureDimension::kNone: { |
| break; |
| } |
| case core::type::TextureDimension::k1d: { |
| dim = SpvDim1D; |
| if (texture->Is<core::type::SampledTexture>()) { |
| module_.PushCapability(SpvCapabilitySampled1D); |
| } else if (texture->Is<core::type::StorageTexture>()) { |
| module_.PushCapability(SpvCapabilityImage1D); |
| } |
| break; |
| } |
| case core::type::TextureDimension::k2d: { |
| dim = SpvDim2D; |
| break; |
| } |
| case core::type::TextureDimension::k2dArray: { |
| dim = SpvDim2D; |
| array = 1u; |
| break; |
| } |
| case core::type::TextureDimension::k3d: { |
| dim = SpvDim3D; |
| break; |
| } |
| case core::type::TextureDimension::kCube: { |
| dim = SpvDimCube; |
| break; |
| } |
| case core::type::TextureDimension::kCubeArray: { |
| dim = SpvDimCube; |
| array = 1u; |
| if (texture->Is<core::type::SampledTexture>()) { |
| module_.PushCapability(SpvCapabilitySampledCubeArray); |
| } |
| break; |
| } |
| } |
| |
| // The Vulkan spec says: The "Depth" operand of OpTypeImage is ignored. |
| // In SPIRV, 0 means not depth, 1 means depth, and 2 means unknown. |
| // Using anything other than 0 is problematic on various Vulkan drivers. |
| uint32_t depth = 0u; |
| |
| uint32_t ms = 0u; |
| if (texture->Is<core::type::MultisampledTexture>()) { |
| ms = 1u; |
| } |
| |
| uint32_t sampled = 2u; |
| if (texture->IsAnyOf<core::type::MultisampledTexture, core::type::SampledTexture>()) { |
| sampled = 1u; |
| } |
| |
| uint32_t format = SpvImageFormat_::SpvImageFormatUnknown; |
| if (auto* st = texture->As<core::type::StorageTexture>()) { |
| format = TexelFormat(st->texel_format()); |
| } |
| |
| module_.PushType(spv::Op::OpTypeImage, |
| {id, sampled_type, dim, depth, array, ms, sampled, format}); |
| } |
| |
| /// Emit a function. |
| /// @param func the function to emit |
| void EmitFunction(core::ir::Function* func) { |
| auto id = Value(func); |
| |
| // Emit the function name. |
| module_.PushDebug(spv::Op::OpName, {id, Operand(ir_.NameOf(func).Name())}); |
| |
| // Emit OpEntryPoint and OpExecutionMode declarations if needed. |
| if (func->Stage() != core::ir::Function::PipelineStage::kUndefined) { |
| EmitEntryPoint(func, id); |
| } |
| |
| // Get the ID for the return type. |
| auto return_type_id = Type(func->ReturnType()); |
| |
| FunctionType function_type{return_type_id, {}}; |
| InstructionList params; |
| |
| // Generate function parameter declarations and add their type IDs to the function |
| // signature. |
| for (auto* param : func->Params()) { |
| auto param_type_id = Type(param->Type()); |
| auto param_id = Value(param); |
| params.push_back(Instruction(spv::Op::OpFunctionParameter, {param_type_id, param_id})); |
| function_type.param_type_ids.Push(param_type_id); |
| if (auto name = ir_.NameOf(param)) { |
| module_.PushDebug(spv::Op::OpName, {param_id, Operand(name.Name())}); |
| } |
| } |
| |
| // Get the ID for the function type (creating it if needed). |
| auto function_type_id = function_types_.GetOrCreate(function_type, [&] { |
| auto func_ty_id = module_.NextId(); |
| OperandList operands = {func_ty_id, return_type_id}; |
| operands.insert(operands.end(), function_type.param_type_ids.begin(), |
| function_type.param_type_ids.end()); |
| module_.PushType(spv::Op::OpTypeFunction, operands); |
| return func_ty_id; |
| }); |
| |
| // Declare the function. |
| auto decl = Instruction{ |
| spv::Op::OpFunction, |
| {return_type_id, id, U32Operand(SpvFunctionControlMaskNone), function_type_id}}; |
| |
| // Create a function that we will add instructions to. |
| auto entry_block = module_.NextId(); |
| current_function_ = Function(decl, entry_block, std::move(params)); |
| TINT_DEFER(current_function_ = Function()); |
| |
| // Emit the body of the function. |
| EmitBlock(func->Block()); |
| |
| // Add the function to the module. |
| module_.PushFunction(current_function_); |
| } |
| |
| /// Emit entry point declarations for a function. |
| /// @param func the function to emit entry point declarations for |
| /// @param id the result ID of the function declaration |
| void EmitEntryPoint(core::ir::Function* func, uint32_t id) { |
| SpvExecutionModel stage = SpvExecutionModelMax; |
| switch (func->Stage()) { |
| case core::ir::Function::PipelineStage::kCompute: { |
| stage = SpvExecutionModelGLCompute; |
| module_.PushExecutionMode( |
| spv::Op::OpExecutionMode, |
| {id, U32Operand(SpvExecutionModeLocalSize), func->WorkgroupSize()->at(0), |
| func->WorkgroupSize()->at(1), func->WorkgroupSize()->at(2)}); |
| break; |
| } |
| case core::ir::Function::PipelineStage::kFragment: { |
| stage = SpvExecutionModelFragment; |
| module_.PushExecutionMode(spv::Op::OpExecutionMode, |
| {id, U32Operand(SpvExecutionModeOriginUpperLeft)}); |
| break; |
| } |
| case core::ir::Function::PipelineStage::kVertex: { |
| stage = SpvExecutionModelVertex; |
| break; |
| } |
| case core::ir::Function::PipelineStage::kUndefined: |
| TINT_ICE() << "undefined pipeline stage for entry point"; |
| return; |
| } |
| |
| OperandList operands = {U32Operand(stage), id, ir_.NameOf(func).Name()}; |
| |
| // Add the list of all referenced shader IO variables. |
| for (auto* global : *ir_.root_block) { |
| auto* var = global->As<core::ir::Var>(); |
| if (!var) { |
| continue; |
| } |
| |
| auto* ptr = var->Result()->Type()->As<core::type::Pointer>(); |
| if (!(ptr->AddressSpace() == core::AddressSpace::kIn || |
| ptr->AddressSpace() == core::AddressSpace::kOut)) { |
| continue; |
| } |
| |
| // Determine if this IO variable is used by the entry point. |
| bool used = false; |
| for (const auto& use : var->Result()->Usages()) { |
| auto* block = use.instruction->Block(); |
| while (block->Parent()) { |
| block = block->Parent()->Block(); |
| } |
| if (block == func->Block()) { |
| used = true; |
| break; |
| } |
| } |
| if (!used) { |
| continue; |
| } |
| operands.push_back(Value(var)); |
| |
| // Add the `DepthReplacing` execution mode if `frag_depth` is used. |
| if (var->Attributes().builtin == core::BuiltinValue::kFragDepth) { |
| module_.PushExecutionMode(spv::Op::OpExecutionMode, |
| {id, U32Operand(SpvExecutionModeDepthReplacing)}); |
| } |
| } |
| |
| module_.PushEntryPoint(spv::Op::OpEntryPoint, operands); |
| } |
| |
| /// Emit the root block. |
| /// @param root_block the root block to emit |
| void EmitRootBlock(core::ir::Block* root_block) { |
| for (auto* inst : *root_block) { |
| Switch( |
| inst, // |
| [&](core::ir::Var* v) { return EmitVar(v); }, // |
| TINT_ICE_ON_NO_MATCH); |
| } |
| } |
| |
| /// Emit a block, including the initial OpLabel, OpPhis and instructions. |
| /// @param block the block to emit |
| void EmitBlock(core::ir::Block* block) { |
| // Emit the label. |
| // Skip if this is the function's entry block, as it will be emitted by the function object. |
| if (!current_function_.instructions().empty()) { |
| current_function_.push_inst(spv::Op::OpLabel, {Label(block)}); |
| } |
| |
| // If there are no instructions in the block, it's a dead end, so we shouldn't be able to |
| // get here to begin with. |
| if (block->IsEmpty()) { |
| if (!block->Parent()->Results().IsEmpty()) { |
| current_function_.push_inst(spv::Op::OpBranch, {GetMergeLabel(block->Parent())}); |
| } else { |
| current_function_.push_inst(spv::Op::OpUnreachable, {}); |
| } |
| return; |
| } |
| |
| if (auto* mib = block->As<core::ir::MultiInBlock>()) { |
| // Emit all OpPhi nodes for incoming branches to block. |
| EmitIncomingPhis(mib); |
| } |
| |
| // Emit the block's statements. |
| EmitBlockInstructions(block); |
| } |
| |
| /// Emit all OpPhi nodes for incoming branches to @p block. |
| /// @param block the block to emit the OpPhis for |
| void EmitIncomingPhis(core::ir::MultiInBlock* block) { |
| // Emit Phi nodes for all the incoming block parameters |
| for (size_t param_idx = 0; param_idx < block->Params().Length(); param_idx++) { |
| auto* param = block->Params()[param_idx]; |
| OperandList ops{Type(param->Type()), Value(param)}; |
| |
| for (auto* incoming : block->InboundSiblingBranches()) { |
| auto* arg = incoming->Args()[param_idx]; |
| ops.push_back(Value(arg)); |
| ops.push_back(GetTerminatorBlockLabel(incoming)); |
| } |
| |
| current_function_.push_inst(spv::Op::OpPhi, std::move(ops)); |
| } |
| } |
| |
| /// Emit all instructions of @p block. |
| /// @param block the block's instructions to emit |
| void EmitBlockInstructions(core::ir::Block* block) { |
| for (auto* inst : *block) { |
| Switch( |
| inst, // |
| [&](core::ir::Access* a) { EmitAccess(a); }, // |
| [&](core::ir::Binary* b) { EmitBinary(b); }, // |
| [&](core::ir::Bitcast* b) { EmitBitcast(b); }, // |
| [&](core::ir::CoreBuiltinCall* b) { EmitCoreBuiltinCall(b); }, // |
| [&](spirv::ir::BuiltinCall* b) { EmitSpirvBuiltinCall(b); }, // |
| [&](core::ir::Construct* c) { EmitConstruct(c); }, // |
| [&](core::ir::Convert* c) { EmitConvert(c); }, // |
| [&](core::ir::Load* l) { EmitLoad(l); }, // |
| [&](core::ir::LoadVectorElement* l) { EmitLoadVectorElement(l); }, // |
| [&](core::ir::Loop* l) { EmitLoop(l); }, // |
| [&](core::ir::Switch* sw) { EmitSwitch(sw); }, // |
| [&](core::ir::Swizzle* s) { EmitSwizzle(s); }, // |
| [&](core::ir::Store* s) { EmitStore(s); }, // |
| [&](core::ir::StoreVectorElement* s) { EmitStoreVectorElement(s); }, // |
| [&](core::ir::UserCall* c) { EmitUserCall(c); }, // |
| [&](core::ir::Unary* u) { EmitUnary(u); }, // |
| [&](core::ir::Var* v) { EmitVar(v); }, // |
| [&](core::ir::Let* l) { EmitLet(l); }, // |
| [&](core::ir::If* i) { EmitIf(i); }, // |
| [&](core::ir::Terminator* t) { EmitTerminator(t); }, // |
| TINT_ICE_ON_NO_MATCH); |
| |
| // Set the name for the SPIR-V result ID if provided in the module. |
| if (inst->Result(0) && !inst->Is<core::ir::Var>()) { |
| if (auto name = ir_.NameOf(inst)) { |
| module_.PushDebug(spv::Op::OpName, {Value(inst), Operand(name.Name())}); |
| } |
| } |
| } |
| |
| if (block->IsEmpty()) { |
| // If the last emitted instruction is not a branch, then this should be unreachable. |
| current_function_.push_inst(spv::Op::OpUnreachable, {}); |
| } |
| } |
| |
| /// Emit a terminator instruction. |
| /// @param t the terminator instruction to emit |
| void EmitTerminator(core::ir::Terminator* t) { |
| tint::Switch( // |
| t, // |
| [&](core::ir::Return*) { |
| if (!t->Args().IsEmpty()) { |
| TINT_ASSERT(t->Args().Length() == 1u); |
| OperandList operands; |
| operands.push_back(Value(t->Args()[0])); |
| current_function_.push_inst(spv::Op::OpReturnValue, operands); |
| } else { |
| current_function_.push_inst(spv::Op::OpReturn, {}); |
| } |
| return; |
| }, |
| [&](core::ir::BreakIf* breakif) { |
| current_function_.push_inst(spv::Op::OpBranchConditional, |
| { |
| Value(breakif->Condition()), |
| loop_merge_label_, |
| loop_header_label_, |
| }); |
| }, |
| [&](core::ir::Continue* cont) { |
| current_function_.push_inst(spv::Op::OpBranch, {Label(cont->Loop()->Continuing())}); |
| }, |
| [&](core::ir::ExitIf*) { |
| current_function_.push_inst(spv::Op::OpBranch, {if_merge_label_}); |
| }, |
| [&](core::ir::ExitLoop*) { |
| current_function_.push_inst(spv::Op::OpBranch, {loop_merge_label_}); |
| }, |
| [&](core::ir::ExitSwitch*) { |
| current_function_.push_inst(spv::Op::OpBranch, {switch_merge_label_}); |
| }, |
| [&](core::ir::NextIteration*) { |
| current_function_.push_inst(spv::Op::OpBranch, {loop_header_label_}); |
| }, |
| [&](core::ir::TerminateInvocation*) { |
| current_function_.push_inst(spv::Op::OpKill, {}); |
| }, |
| [&](core::ir::Unreachable*) { |
| current_function_.push_inst(spv::Op::OpUnreachable, {}); |
| }, // |
| TINT_ICE_ON_NO_MATCH); |
| } |
| |
| /// Emit an `if` flow node. |
| /// @param i the if node to emit |
| void EmitIf(core::ir::If* i) { |
| auto* true_block = i->True(); |
| auto* false_block = i->False(); |
| |
| // Generate labels for the blocks. We emit the true or false block if it: |
| // 1. contains instructions other then the branch, or |
| // 2. branches somewhere instead of exiting the loop (e.g. return or break), or |
| // 3. the if returns a value |
| // Otherwise we skip them and branch straight to the merge block. |
| uint32_t merge_label = GetMergeLabel(i); |
| TINT_SCOPED_ASSIGNMENT(if_merge_label_, merge_label); |
| |
| uint32_t true_label = merge_label; |
| uint32_t false_label = merge_label; |
| if (true_block->Length() > 1 || !i->Results().IsEmpty() || |
| (true_block->Terminator() && !true_block->Terminator()->Is<core::ir::ExitIf>())) { |
| true_label = Label(true_block); |
| } |
| if (false_block->Length() > 1 || !i->Results().IsEmpty() || |
| (false_block->Terminator() && !false_block->Terminator()->Is<core::ir::ExitIf>())) { |
| false_label = Label(false_block); |
| } |
| |
| // Emit the OpSelectionMerge and OpBranchConditional instructions. |
| current_function_.push_inst(spv::Op::OpSelectionMerge, |
| {merge_label, U32Operand(SpvSelectionControlMaskNone)}); |
| current_function_.push_inst(spv::Op::OpBranchConditional, |
| {Value(i->Condition()), true_label, false_label}); |
| |
| // Emit the `true` and `false` blocks, if they're not being skipped. |
| if (true_label != merge_label) { |
| EmitBlock(true_block); |
| } |
| if (false_label != merge_label) { |
| EmitBlock(false_block); |
| } |
| |
| current_function_.push_inst(spv::Op::OpLabel, {merge_label}); |
| |
| // Emit the OpPhis for the ExitIfs |
| EmitExitPhis(i); |
| } |
| |
| /// Emit an access instruction |
| /// @param access the access instruction to emit |
| void EmitAccess(core::ir::Access* access) { |
| auto* ty = access->Result()->Type(); |
| |
| auto id = Value(access); |
| OperandList operands = {Type(ty), id, Value(access->Object())}; |
| |
| if (ty->Is<core::type::Pointer>()) { |
| // Use OpAccessChain for accesses into pointer types. |
| for (auto* idx : access->Indices()) { |
| operands.push_back(Value(idx)); |
| } |
| current_function_.push_inst(spv::Op::OpAccessChain, std::move(operands)); |
| return; |
| } |
| |
| // For non-pointer types, we assume that the indices are constants and use |
| // OpCompositeExtract. If we hit a non-constant index into a vector type, use |
| // OpVectorExtractDynamic for it. |
| auto* source_ty = access->Object()->Type(); |
| for (auto* idx : access->Indices()) { |
| if (auto* constant = idx->As<core::ir::Constant>()) { |
| // Push the index to the chain and update the current type. |
| auto i = constant->Value()->ValueAs<u32>(); |
| operands.push_back(i); |
| source_ty = source_ty->Element(i); |
| } else { |
| // The VarForDynamicIndex transform ensures that only value types that are vectors |
| // will be dynamically indexed, as we can use OpVectorExtractDynamic for this case. |
| TINT_ASSERT(source_ty->Is<core::type::Vector>()); |
| |
| // If this wasn't the first access in the chain then emit the chain so far as an |
| // OpCompositeExtract, creating a new result ID for the resulting vector. |
| auto vec_id = Value(access->Object()); |
| if (operands.size() > 3) { |
| vec_id = module_.NextId(); |
| operands[0] = Type(source_ty); |
| operands[1] = vec_id; |
| current_function_.push_inst(spv::Op::OpCompositeExtract, std::move(operands)); |
| } |
| |
| // Now emit the OpVectorExtractDynamic instruction. |
| operands = {Type(ty), id, vec_id, Value(idx)}; |
| current_function_.push_inst(spv::Op::OpVectorExtractDynamic, std::move(operands)); |
| return; |
| } |
| } |
| current_function_.push_inst(spv::Op::OpCompositeExtract, std::move(operands)); |
| } |
| |
| /// Emit a binary instruction. |
| /// @param binary the binary instruction to emit |
| void EmitBinary(core::ir::Binary* binary) { |
| auto id = Value(binary); |
| auto lhs = Value(binary->LHS()); |
| auto rhs = Value(binary->RHS()); |
| auto* ty = binary->Result()->Type(); |
| auto* lhs_ty = binary->LHS()->Type(); |
| |
| // Determine the opcode. |
| spv::Op op = spv::Op::Max; |
| switch (binary->Op()) { |
| case core::ir::BinaryOp::kAdd: { |
| op = ty->is_integer_scalar_or_vector() ? spv::Op::OpIAdd : spv::Op::OpFAdd; |
| break; |
| } |
| case core::ir::BinaryOp::kDivide: { |
| if (ty->is_signed_integer_scalar_or_vector()) { |
| op = spv::Op::OpSDiv; |
| } else if (ty->is_unsigned_integer_scalar_or_vector()) { |
| op = spv::Op::OpUDiv; |
| } else if (ty->is_float_scalar_or_vector()) { |
| op = spv::Op::OpFDiv; |
| } |
| break; |
| } |
| case core::ir::BinaryOp::kMultiply: { |
| if (ty->is_integer_scalar_or_vector()) { |
| op = spv::Op::OpIMul; |
| } else if (ty->is_float_scalar_or_vector()) { |
| op = spv::Op::OpFMul; |
| } |
| break; |
| } |
| case core::ir::BinaryOp::kSubtract: { |
| op = ty->is_integer_scalar_or_vector() ? spv::Op::OpISub : spv::Op::OpFSub; |
| break; |
| } |
| case core::ir::BinaryOp::kModulo: { |
| if (ty->is_signed_integer_scalar_or_vector()) { |
| op = spv::Op::OpSRem; |
| } else if (ty->is_unsigned_integer_scalar_or_vector()) { |
| op = spv::Op::OpUMod; |
| } else if (ty->is_float_scalar_or_vector()) { |
| op = spv::Op::OpFRem; |
| } |
| break; |
| } |
| |
| case core::ir::BinaryOp::kAnd: { |
| if (ty->is_integer_scalar_or_vector()) { |
| op = spv::Op::OpBitwiseAnd; |
| } else if (ty->is_bool_scalar_or_vector()) { |
| op = spv::Op::OpLogicalAnd; |
| } |
| break; |
| } |
| case core::ir::BinaryOp::kOr: { |
| if (ty->is_integer_scalar_or_vector()) { |
| op = spv::Op::OpBitwiseOr; |
| } else if (ty->is_bool_scalar_or_vector()) { |
| op = spv::Op::OpLogicalOr; |
| } |
| break; |
| } |
| case core::ir::BinaryOp::kXor: { |
| op = spv::Op::OpBitwiseXor; |
| break; |
| } |
| |
| case core::ir::BinaryOp::kShiftLeft: { |
| op = spv::Op::OpShiftLeftLogical; |
| break; |
| } |
| case core::ir::BinaryOp::kShiftRight: { |
| if (ty->is_signed_integer_scalar_or_vector()) { |
| op = spv::Op::OpShiftRightArithmetic; |
| } else if (ty->is_unsigned_integer_scalar_or_vector()) { |
| op = spv::Op::OpShiftRightLogical; |
| } |
| break; |
| } |
| |
| case core::ir::BinaryOp::kEqual: { |
| if (lhs_ty->is_bool_scalar_or_vector()) { |
| op = spv::Op::OpLogicalEqual; |
| } else if (lhs_ty->is_float_scalar_or_vector()) { |
| op = spv::Op::OpFOrdEqual; |
| } else if (lhs_ty->is_integer_scalar_or_vector()) { |
| op = spv::Op::OpIEqual; |
| } |
| break; |
| } |
| case core::ir::BinaryOp::kNotEqual: { |
| if (lhs_ty->is_bool_scalar_or_vector()) { |
| op = spv::Op::OpLogicalNotEqual; |
| } else if (lhs_ty->is_float_scalar_or_vector()) { |
| op = spv::Op::OpFOrdNotEqual; |
| } else if (lhs_ty->is_integer_scalar_or_vector()) { |
| op = spv::Op::OpINotEqual; |
| } |
| break; |
| } |
| case core::ir::BinaryOp::kGreaterThan: { |
| if (lhs_ty->is_float_scalar_or_vector()) { |
| op = spv::Op::OpFOrdGreaterThan; |
| } else if (lhs_ty->is_signed_integer_scalar_or_vector()) { |
| op = spv::Op::OpSGreaterThan; |
| } else if (lhs_ty->is_unsigned_integer_scalar_or_vector()) { |
| op = spv::Op::OpUGreaterThan; |
| } |
| break; |
| } |
| case core::ir::BinaryOp::kGreaterThanEqual: { |
| if (lhs_ty->is_float_scalar_or_vector()) { |
| op = spv::Op::OpFOrdGreaterThanEqual; |
| } else if (lhs_ty->is_signed_integer_scalar_or_vector()) { |
| op = spv::Op::OpSGreaterThanEqual; |
| } else if (lhs_ty->is_unsigned_integer_scalar_or_vector()) { |
| op = spv::Op::OpUGreaterThanEqual; |
| } |
| break; |
| } |
| case core::ir::BinaryOp::kLessThan: { |
| if (lhs_ty->is_float_scalar_or_vector()) { |
| op = spv::Op::OpFOrdLessThan; |
| } else if (lhs_ty->is_signed_integer_scalar_or_vector()) { |
| op = spv::Op::OpSLessThan; |
| } else if (lhs_ty->is_unsigned_integer_scalar_or_vector()) { |
| op = spv::Op::OpULessThan; |
| } |
| break; |
| } |
| case core::ir::BinaryOp::kLessThanEqual: { |
| if (lhs_ty->is_float_scalar_or_vector()) { |
| op = spv::Op::OpFOrdLessThanEqual; |
| } else if (lhs_ty->is_signed_integer_scalar_or_vector()) { |
| op = spv::Op::OpSLessThanEqual; |
| } else if (lhs_ty->is_unsigned_integer_scalar_or_vector()) { |
| op = spv::Op::OpULessThanEqual; |
| } |
| break; |
| } |
| } |
| |
| // Emit the instruction. |
| current_function_.push_inst(op, {Type(ty), id, lhs, rhs}); |
| } |
| |
| /// Emit a bitcast instruction. |
| /// @param bitcast the bitcast instruction to emit |
| void EmitBitcast(core::ir::Bitcast* bitcast) { |
| auto* ty = bitcast->Result()->Type(); |
| if (ty == bitcast->Val()->Type()) { |
| values_.Add(bitcast->Result(), Value(bitcast->Val())); |
| return; |
| } |
| current_function_.push_inst(spv::Op::OpBitcast, |
| {Type(ty), Value(bitcast), Value(bitcast->Val())}); |
| } |
| |
| /// Emit a builtin function call instruction. |
| /// @param builtin the builtin call instruction to emit |
| void EmitSpirvBuiltinCall(spirv::ir::BuiltinCall* builtin) { |
| auto id = Value(builtin); |
| |
| spv::Op op = spv::Op::Max; |
| switch (builtin->Func()) { |
| case spirv::BuiltinFn::kArrayLength: |
| op = spv::Op::OpArrayLength; |
| break; |
| case spirv::BuiltinFn::kAtomicIadd: |
| op = spv::Op::OpAtomicIAdd; |
| break; |
| case spirv::BuiltinFn::kAtomicIsub: |
| op = spv::Op::OpAtomicISub; |
| break; |
| case spirv::BuiltinFn::kAtomicAnd: |
| op = spv::Op::OpAtomicAnd; |
| break; |
| case spirv::BuiltinFn::kAtomicCompareExchange: |
| op = spv::Op::OpAtomicCompareExchange; |
| break; |
| case spirv::BuiltinFn::kAtomicExchange: |
| op = spv::Op::OpAtomicExchange; |
| break; |
| case spirv::BuiltinFn::kAtomicLoad: |
| op = spv::Op::OpAtomicLoad; |
| break; |
| case spirv::BuiltinFn::kAtomicOr: |
| op = spv::Op::OpAtomicOr; |
| break; |
| case spirv::BuiltinFn::kAtomicSmax: |
| op = spv::Op::OpAtomicSMax; |
| break; |
| case spirv::BuiltinFn::kAtomicSmin: |
| op = spv::Op::OpAtomicSMin; |
| break; |
| case spirv::BuiltinFn::kAtomicStore: |
| op = spv::Op::OpAtomicStore; |
| break; |
| case spirv::BuiltinFn::kAtomicUmax: |
| op = spv::Op::OpAtomicUMax; |
| break; |
| case spirv::BuiltinFn::kAtomicUmin: |
| op = spv::Op::OpAtomicUMin; |
| break; |
| case spirv::BuiltinFn::kAtomicXor: |
| op = spv::Op::OpAtomicXor; |
| break; |
| case spirv::BuiltinFn::kDot: |
| op = spv::Op::OpDot; |
| break; |
| case spirv::BuiltinFn::kImageDrefGather: |
| op = spv::Op::OpImageDrefGather; |
| break; |
| case spirv::BuiltinFn::kImageFetch: |
| op = spv::Op::OpImageFetch; |
| break; |
| case spirv::BuiltinFn::kImageGather: |
| op = spv::Op::OpImageGather; |
| break; |
| case spirv::BuiltinFn::kImageQuerySize: |
| module_.PushCapability(SpvCapabilityImageQuery); |
| op = spv::Op::OpImageQuerySize; |
| break; |
| case spirv::BuiltinFn::kImageQuerySizeLod: |
| module_.PushCapability(SpvCapabilityImageQuery); |
| op = spv::Op::OpImageQuerySizeLod; |
| break; |
| case spirv::BuiltinFn::kImageRead: |
| op = spv::Op::OpImageRead; |
| break; |
| case spirv::BuiltinFn::kImageSampleImplicitLod: |
| op = spv::Op::OpImageSampleImplicitLod; |
| break; |
| case spirv::BuiltinFn::kImageSampleExplicitLod: |
| op = spv::Op::OpImageSampleExplicitLod; |
| break; |
| case spirv::BuiltinFn::kImageSampleDrefImplicitLod: |
| op = spv::Op::OpImageSampleDrefImplicitLod; |
| break; |
| case spirv::BuiltinFn::kImageSampleDrefExplicitLod: |
| op = spv::Op::OpImageSampleDrefExplicitLod; |
| break; |
| case spirv::BuiltinFn::kImageWrite: |
| op = spv::Op::OpImageWrite; |
| break; |
| case spirv::BuiltinFn::kMatrixTimesMatrix: |
| op = spv::Op::OpMatrixTimesMatrix; |
| break; |
| case spirv::BuiltinFn::kMatrixTimesScalar: |
| op = spv::Op::OpMatrixTimesScalar; |
| break; |
| case spirv::BuiltinFn::kMatrixTimesVector: |
| op = spv::Op::OpMatrixTimesVector; |
| break; |
| case spirv::BuiltinFn::kSampledImage: |
| op = spv::Op::OpSampledImage; |
| break; |
| case spirv::BuiltinFn::kSdot: |
| module_.PushExtension("SPV_KHR_integer_dot_product"); |
| module_.PushCapability(SpvCapabilityDotProductKHR); |
| module_.PushCapability(SpvCapabilityDotProductInput4x8BitPackedKHR); |
| op = spv::Op::OpSDot; |
| break; |
| case spirv::BuiltinFn::kSelect: |
| op = spv::Op::OpSelect; |
| break; |
| case spirv::BuiltinFn::kUdot: |
| module_.PushExtension("SPV_KHR_integer_dot_product"); |
| module_.PushCapability(SpvCapabilityDotProductKHR); |
| module_.PushCapability(SpvCapabilityDotProductInput4x8BitPackedKHR); |
| op = spv::Op::OpUDot; |
| break; |
| case spirv::BuiltinFn::kVectorTimesMatrix: |
| op = spv::Op::OpVectorTimesMatrix; |
| break; |
| case spirv::BuiltinFn::kVectorTimesScalar: |
| op = spv::Op::OpVectorTimesScalar; |
| break; |
| case spirv::BuiltinFn::kNone: |
| TINT_ICE() << "undefined spirv ir function"; |
| return; |
| } |
| |
| OperandList operands; |
| if (!builtin->Result()->Type()->Is<core::type::Void>()) { |
| operands = {Type(builtin->Result()->Type()), id}; |
| } |
| for (auto* arg : builtin->Args()) { |
| operands.push_back(Value(arg)); |
| } |
| current_function_.push_inst(op, operands); |
| } |
| |
| /// Emit a builtin function call instruction. |
| /// @param builtin the builtin call instruction to emit |
| void EmitCoreBuiltinCall(core::ir::CoreBuiltinCall* builtin) { |
| auto* result_ty = builtin->Result()->Type(); |
| |
| if (builtin->Func() == core::BuiltinFn::kAbs && |
| result_ty->is_unsigned_integer_scalar_or_vector()) { |
| // abs() is a no-op for unsigned integers. |
| values_.Add(builtin->Result(), Value(builtin->Args()[0])); |
| return; |
| } |
| if ((builtin->Func() == core::BuiltinFn::kAll || |
| builtin->Func() == core::BuiltinFn::kAny) && |
| builtin->Args()[0]->Type()->Is<core::type::Bool>()) { |
| // all() and any() are passthroughs for scalar arguments. |
| values_.Add(builtin->Result(), Value(builtin->Args()[0])); |
| return; |
| } |
| |
| auto id = Value(builtin); |
| |
| spv::Op op = spv::Op::Max; |
| OperandList operands = {Type(result_ty), id}; |
| |
| // Helper to set up the opcode and operand list for a GLSL extended instruction. |
| auto glsl_ext_inst = [&](enum GLSLstd450 inst) { |
| constexpr const char* kGLSLstd450 = "GLSL.std.450"; |
| op = spv::Op::OpExtInst; |
| operands.push_back(imports_.GetOrCreate(kGLSLstd450, [&] { |
| // Import the instruction set the first time it is requested. |
| auto import = module_.NextId(); |
| module_.PushExtImport(spv::Op::OpExtInstImport, {import, Operand(kGLSLstd450)}); |
| return import; |
| })); |
| operands.push_back(U32Operand(inst)); |
| }; |
| |
| // Determine the opcode. |
| switch (builtin->Func()) { |
| case core::BuiltinFn::kAbs: |
| if (result_ty->is_float_scalar_or_vector()) { |
| glsl_ext_inst(GLSLstd450FAbs); |
| } else if (result_ty->is_signed_integer_scalar_or_vector()) { |
| glsl_ext_inst(GLSLstd450SAbs); |
| } |
| break; |
| case core::BuiltinFn::kAll: |
| op = spv::Op::OpAll; |
| break; |
| case core::BuiltinFn::kAny: |
| op = spv::Op::OpAny; |
| break; |
| case core::BuiltinFn::kAcos: |
| glsl_ext_inst(GLSLstd450Acos); |
| break; |
| case core::BuiltinFn::kAcosh: |
| glsl_ext_inst(GLSLstd450Acosh); |
| break; |
| case core::BuiltinFn::kAsin: |
| glsl_ext_inst(GLSLstd450Asin); |
| break; |
| case core::BuiltinFn::kAsinh: |
| glsl_ext_inst(GLSLstd450Asinh); |
| break; |
| case core::BuiltinFn::kAtan: |
| glsl_ext_inst(GLSLstd450Atan); |
| break; |
| case core::BuiltinFn::kAtan2: |
| glsl_ext_inst(GLSLstd450Atan2); |
| break; |
| case core::BuiltinFn::kAtanh: |
| glsl_ext_inst(GLSLstd450Atanh); |
| break; |
| case core::BuiltinFn::kClamp: |
| if (result_ty->is_float_scalar_or_vector()) { |
| glsl_ext_inst(GLSLstd450NClamp); |
| } else if (result_ty->is_unsigned_integer_scalar_or_vector()) { |
| glsl_ext_inst(GLSLstd450UClamp); |
| } else if (result_ty->is_signed_integer_scalar_or_vector()) { |
| glsl_ext_inst(GLSLstd450SClamp); |
| } |
| break; |
| case core::BuiltinFn::kCeil: |
| glsl_ext_inst(GLSLstd450Ceil); |
| break; |
| case core::BuiltinFn::kCos: |
| glsl_ext_inst(GLSLstd450Cos); |
| break; |
| case core::BuiltinFn::kCosh: |
| glsl_ext_inst(GLSLstd450Cosh); |
| break; |
| case core::BuiltinFn::kCountOneBits: |
| op = spv::Op::OpBitCount; |
| break; |
| case core::BuiltinFn::kCross: |
| glsl_ext_inst(GLSLstd450Cross); |
| break; |
| case core::BuiltinFn::kDegrees: |
| glsl_ext_inst(GLSLstd450Degrees); |
| break; |
| case core::BuiltinFn::kDeterminant: |
| glsl_ext_inst(GLSLstd450Determinant); |
| break; |
| case core::BuiltinFn::kDistance: |
| glsl_ext_inst(GLSLstd450Distance); |
| break; |
| case core::BuiltinFn::kDpdx: |
| op = spv::Op::OpDPdx; |
| break; |
| case core::BuiltinFn::kDpdxCoarse: |
| module_.PushCapability(SpvCapabilityDerivativeControl); |
| op = spv::Op::OpDPdxCoarse; |
| break; |
| case core::BuiltinFn::kDpdxFine: |
| module_.PushCapability(SpvCapabilityDerivativeControl); |
| op = spv::Op::OpDPdxFine; |
| break; |
| case core::BuiltinFn::kDpdy: |
| op = spv::Op::OpDPdy; |
| break; |
| case core::BuiltinFn::kDpdyCoarse: |
| module_.PushCapability(SpvCapabilityDerivativeControl); |
| op = spv::Op::OpDPdyCoarse; |
| break; |
| case core::BuiltinFn::kDpdyFine: |
| module_.PushCapability(SpvCapabilityDerivativeControl); |
| op = spv::Op::OpDPdyFine; |
| break; |
| case core::BuiltinFn::kExp: |
| glsl_ext_inst(GLSLstd450Exp); |
| break; |
| case core::BuiltinFn::kExp2: |
| glsl_ext_inst(GLSLstd450Exp2); |
| break; |
| case core::BuiltinFn::kExtractBits: |
| op = result_ty->is_signed_integer_scalar_or_vector() ? spv::Op::OpBitFieldSExtract |
| : spv::Op::OpBitFieldUExtract; |
| break; |
| case core::BuiltinFn::kFaceForward: |
| glsl_ext_inst(GLSLstd450FaceForward); |
| break; |
| case core::BuiltinFn::kFloor: |
| glsl_ext_inst(GLSLstd450Floor); |
| break; |
| case core::BuiltinFn::kFma: |
| glsl_ext_inst(GLSLstd450Fma); |
| break; |
| case core::BuiltinFn::kFract: |
| glsl_ext_inst(GLSLstd450Fract); |
| break; |
| case core::BuiltinFn::kFrexp: |
| glsl_ext_inst(GLSLstd450FrexpStruct); |
| break; |
| case core::BuiltinFn::kFwidth: |
| op = spv::Op::OpFwidth; |
| break; |
| case core::BuiltinFn::kFwidthCoarse: |
| module_.PushCapability(SpvCapabilityDerivativeControl); |
| op = spv::Op::OpFwidthCoarse; |
| break; |
| case core::BuiltinFn::kFwidthFine: |
| module_.PushCapability(SpvCapabilityDerivativeControl); |
| op = spv::Op::OpFwidthFine; |
| break; |
| case core::BuiltinFn::kInsertBits: |
| op = spv::Op::OpBitFieldInsert; |
| break; |
| case core::BuiltinFn::kInverseSqrt: |
| glsl_ext_inst(GLSLstd450InverseSqrt); |
| break; |
| case core::BuiltinFn::kLdexp: |
| glsl_ext_inst(GLSLstd450Ldexp); |
| break; |
| case core::BuiltinFn::kLength: |
| glsl_ext_inst(GLSLstd450Length); |
| break; |
| case core::BuiltinFn::kLog: |
| glsl_ext_inst(GLSLstd450Log); |
| break; |
| case core::BuiltinFn::kLog2: |
| glsl_ext_inst(GLSLstd450Log2); |
| break; |
| case core::BuiltinFn::kMax: |
| if (result_ty->is_float_scalar_or_vector()) { |
| glsl_ext_inst(GLSLstd450FMax); |
| } else if (result_ty->is_signed_integer_scalar_or_vector()) { |
| glsl_ext_inst(GLSLstd450SMax); |
| } else if (result_ty->is_unsigned_integer_scalar_or_vector()) { |
| glsl_ext_inst(GLSLstd450UMax); |
| } |
| break; |
| case core::BuiltinFn::kMin: |
| if (result_ty->is_float_scalar_or_vector()) { |
| glsl_ext_inst(GLSLstd450FMin); |
| } else if (result_ty->is_signed_integer_scalar_or_vector()) { |
| glsl_ext_inst(GLSLstd450SMin); |
| } else if (result_ty->is_unsigned_integer_scalar_or_vector()) { |
| glsl_ext_inst(GLSLstd450UMin); |
| } |
| break; |
| case core::BuiltinFn::kMix: |
| glsl_ext_inst(GLSLstd450FMix); |
| break; |
| case core::BuiltinFn::kModf: |
| glsl_ext_inst(GLSLstd450ModfStruct); |
| break; |
| case core::BuiltinFn::kNormalize: |
| glsl_ext_inst(GLSLstd450Normalize); |
| break; |
| case core::BuiltinFn::kPack2X16Float: |
| glsl_ext_inst(GLSLstd450PackHalf2x16); |
| break; |
| case core::BuiltinFn::kPack2X16Snorm: |
| glsl_ext_inst(GLSLstd450PackSnorm2x16); |
| break; |
| case core::BuiltinFn::kPack2X16Unorm: |
| glsl_ext_inst(GLSLstd450PackUnorm2x16); |
| break; |
| case core::BuiltinFn::kPack4X8Snorm: |
| glsl_ext_inst(GLSLstd450PackSnorm4x8); |
| break; |
| case core::BuiltinFn::kPack4X8Unorm: |
| glsl_ext_inst(GLSLstd450PackUnorm4x8); |
| break; |
| case core::BuiltinFn::kPow: |
| glsl_ext_inst(GLSLstd450Pow); |
| break; |
| case core::BuiltinFn::kQuantizeToF16: |
| op = spv::Op::OpQuantizeToF16; |
| break; |
| case core::BuiltinFn::kRadians: |
| glsl_ext_inst(GLSLstd450Radians); |
| break; |
| case core::BuiltinFn::kReflect: |
| glsl_ext_inst(GLSLstd450Reflect); |
| break; |
| case core::BuiltinFn::kRefract: |
| glsl_ext_inst(GLSLstd450Refract); |
| break; |
| case core::BuiltinFn::kReverseBits: |
| op = spv::Op::OpBitReverse; |
| break; |
| case core::BuiltinFn::kRound: |
| glsl_ext_inst(GLSLstd450RoundEven); |
| break; |
| case core::BuiltinFn::kSign: |
| if (result_ty->is_float_scalar_or_vector()) { |
| glsl_ext_inst(GLSLstd450FSign); |
| } else if (result_ty->is_signed_integer_scalar_or_vector()) { |
| glsl_ext_inst(GLSLstd450SSign); |
| } |
| break; |
| case core::BuiltinFn::kSin: |
| glsl_ext_inst(GLSLstd450Sin); |
| break; |
| case core::BuiltinFn::kSinh: |
| glsl_ext_inst(GLSLstd450Sinh); |
| break; |
| case core::BuiltinFn::kSmoothstep: |
| glsl_ext_inst(GLSLstd450SmoothStep); |
| break; |
| case core::BuiltinFn::kSqrt: |
| glsl_ext_inst(GLSLstd450Sqrt); |
| break; |
| case core::BuiltinFn::kStep: |
| glsl_ext_inst(GLSLstd450Step); |
| break; |
| case core::BuiltinFn::kStorageBarrier: |
| op = spv::Op::OpControlBarrier; |
| operands.clear(); |
| operands.push_back(Constant(b_.ConstantValue(u32(spv::Scope::Workgroup)))); |
| operands.push_back(Constant(b_.ConstantValue(u32(spv::Scope::Workgroup)))); |
| operands.push_back( |
| Constant(b_.ConstantValue(u32(spv::MemorySemanticsMask::UniformMemory | |
| spv::MemorySemanticsMask::AcquireRelease)))); |
| break; |
| case core::BuiltinFn::kSubgroupBallot: |
| module_.PushCapability(SpvCapabilityGroupNonUniformBallot); |
| op = spv::Op::OpGroupNonUniformBallot; |
| operands.push_back(Constant(ir_.constant_values.Get(u32(spv::Scope::Subgroup)))); |
| operands.push_back(Constant(ir_.constant_values.Get(true))); |
| break; |
| case core::BuiltinFn::kSubgroupBroadcast: |
| module_.PushCapability(SpvCapabilityGroupNonUniformBallot); |
| op = spv::Op::OpGroupNonUniformBroadcast; |
| operands.push_back(Constant(ir_.constant_values.Get(u32(spv::Scope::Subgroup)))); |
| break; |
| case core::BuiltinFn::kTan: |
| glsl_ext_inst(GLSLstd450Tan); |
| break; |
| case core::BuiltinFn::kTanh: |
| glsl_ext_inst(GLSLstd450Tanh); |
| break; |
| case core::BuiltinFn::kTextureBarrier: |
| op = spv::Op::OpControlBarrier; |
| operands.clear(); |
| operands.push_back(Constant(b_.ConstantValue(u32(spv::Scope::Workgroup)))); |
| operands.push_back(Constant(b_.ConstantValue(u32(spv::Scope::Workgroup)))); |
| operands.push_back( |
| Constant(b_.ConstantValue(u32(spv::MemorySemanticsMask::ImageMemory | |
| spv::MemorySemanticsMask::AcquireRelease)))); |
| break; |
| case core::BuiltinFn::kTextureNumLevels: |
| module_.PushCapability(SpvCapabilityImageQuery); |
| op = spv::Op::OpImageQueryLevels; |
| break; |
| case core::BuiltinFn::kTextureNumSamples: |
| module_.PushCapability(SpvCapabilityImageQuery); |
| op = spv::Op::OpImageQuerySamples; |
| break; |
| case core::BuiltinFn::kTranspose: |
| op = spv::Op::OpTranspose; |
| break; |
| case core::BuiltinFn::kTrunc: |
| glsl_ext_inst(GLSLstd450Trunc); |
| break; |
| case core::BuiltinFn::kUnpack2X16Float: |
| glsl_ext_inst(GLSLstd450UnpackHalf2x16); |
| break; |
| case core::BuiltinFn::kUnpack2X16Snorm: |
| glsl_ext_inst(GLSLstd450UnpackSnorm2x16); |
| break; |
| case core::BuiltinFn::kUnpack2X16Unorm: |
| glsl_ext_inst(GLSLstd450UnpackUnorm2x16); |
| break; |
| case core::BuiltinFn::kUnpack4X8Snorm: |
| glsl_ext_inst(GLSLstd450UnpackSnorm4x8); |
| break; |
| case core::BuiltinFn::kUnpack4X8Unorm: |
| glsl_ext_inst(GLSLstd450UnpackUnorm4x8); |
| break; |
| case core::BuiltinFn::kWorkgroupBarrier: |
| op = spv::Op::OpControlBarrier; |
| operands.clear(); |
| operands.push_back(Constant(b_.ConstantValue(u32(spv::Scope::Workgroup)))); |
| operands.push_back(Constant(b_.ConstantValue(u32(spv::Scope::Workgroup)))); |
| operands.push_back( |
| Constant(b_.ConstantValue(u32(spv::MemorySemanticsMask::WorkgroupMemory | |
| spv::MemorySemanticsMask::AcquireRelease)))); |
| break; |
| default: |
| TINT_ICE() << "unimplemented builtin function: " << builtin->Func(); |
| } |
| TINT_ASSERT(op != spv::Op::Max); |
| |
| // Add the arguments to the builtin call. |
| for (auto* arg : builtin->Args()) { |
| operands.push_back(Value(arg)); |
| } |
| |
| // Emit the instruction. |
| current_function_.push_inst(op, operands); |
| } |
| |
| /// Emit a construct instruction. |
| /// @param construct the construct instruction to emit |
| void EmitConstruct(core::ir::Construct* construct) { |
| // If there is just a single argument with the same type as the result, this is an identity |
| // constructor and we can just pass through the ID of the argument. |
| if (construct->Args().Length() == 1 && |
| construct->Result()->Type() == construct->Args()[0]->Type()) { |
| values_.Add(construct->Result(), Value(construct->Args()[0])); |
| return; |
| } |
| |
| OperandList operands = {Type(construct->Result()->Type()), Value(construct)}; |
| for (auto* arg : construct->Args()) { |
| operands.push_back(Value(arg)); |
| } |
| current_function_.push_inst(spv::Op::OpCompositeConstruct, std::move(operands)); |
| } |
| |
| /// Emit a convert instruction. |
| /// @param convert the convert instruction to emit |
| void EmitConvert(core::ir::Convert* convert) { |
| auto* res_ty = convert->Result()->Type(); |
| auto* arg_ty = convert->Args()[0]->Type(); |
| |
| OperandList operands = {Type(convert->Result()->Type()), Value(convert)}; |
| for (auto* arg : convert->Args()) { |
| operands.push_back(Value(arg)); |
| } |
| |
| spv::Op op = spv::Op::Max; |
| if (res_ty->is_signed_integer_scalar_or_vector() && arg_ty->is_float_scalar_or_vector()) { |
| // float to signed int. |
| op = spv::Op::OpConvertFToS; |
| } else if (res_ty->is_unsigned_integer_scalar_or_vector() && |
| arg_ty->is_float_scalar_or_vector()) { |
| // float to unsigned int. |
| op = spv::Op::OpConvertFToU; |
| } else if (res_ty->is_float_scalar_or_vector() && |
| arg_ty->is_signed_integer_scalar_or_vector()) { |
| // signed int to float. |
| op = spv::Op::OpConvertSToF; |
| } else if (res_ty->is_float_scalar_or_vector() && |
| arg_ty->is_unsigned_integer_scalar_or_vector()) { |
| // unsigned int to float. |
| op = spv::Op::OpConvertUToF; |
| } else if (res_ty->is_float_scalar_or_vector() && arg_ty->is_float_scalar_or_vector() && |
| res_ty->Size() != arg_ty->Size()) { |
| // float to float (different bitwidth). |
| op = spv::Op::OpFConvert; |
| } else if (res_ty->is_integer_scalar_or_vector() && arg_ty->is_integer_scalar_or_vector() && |
| res_ty->Size() == arg_ty->Size()) { |
| // int to int (same bitwidth, different signedness). |
| op = spv::Op::OpBitcast; |
| } else if (res_ty->is_bool_scalar_or_vector()) { |
| if (arg_ty->is_integer_scalar_or_vector()) { |
| // int to bool. |
| op = spv::Op::OpINotEqual; |
| } else { |
| // float to bool. |
| op = spv::Op::OpFUnordNotEqual; |
| } |
| operands.push_back(ConstantNull(arg_ty)); |
| } else if (arg_ty->is_bool_scalar_or_vector()) { |
| // Select between constant one and zero, splatting them to vectors if necessary. |
| core::ir::Constant* one = nullptr; |
| core::ir::Constant* zero = nullptr; |
| Switch( |
| res_ty->DeepestElement(), // |
| [&](const core::type::F32*) { |
| one = b_.Constant(1_f); |
| zero = b_.Constant(0_f); |
| }, |
| [&](const core::type::F16*) { |
| one = b_.Constant(1_h); |
| zero = b_.Constant(0_h); |
| }, |
| [&](const core::type::I32*) { |
| one = b_.Constant(1_i); |
| zero = b_.Constant(0_i); |
| }, |
| [&](const core::type::U32*) { |
| one = b_.Constant(1_u); |
| zero = b_.Constant(0_u); |
| }); |
| TINT_ASSERT_OR_RETURN(one && zero); |
| |
| if (auto* vec = res_ty->As<core::type::Vector>()) { |
| // Splat the scalars into vectors. |
| one = b_.Splat(vec, one, vec->Width()); |
| zero = b_.Splat(vec, zero, vec->Width()); |
| } |
| |
| op = spv::Op::OpSelect; |
| operands.push_back(Constant(b_.ConstantValue(one))); |
| operands.push_back(Constant(b_.ConstantValue(zero))); |
| } else { |
| TINT_ICE() << "unhandled convert instruction"; |
| } |
| |
| current_function_.push_inst(op, std::move(operands)); |
| } |
| |
| /// Emit a load instruction. |
| /// @param load the load instruction to emit |
| void EmitLoad(core::ir::Load* load) { |
| current_function_.push_inst( |
| spv::Op::OpLoad, {Type(load->Result()->Type()), Value(load), Value(load->From())}); |
| } |
| |
| /// Emit a load vector element instruction. |
| /// @param load the load vector element instruction to emit |
| void EmitLoadVectorElement(core::ir::LoadVectorElement* load) { |
| auto* vec_ptr_ty = load->From()->Type()->As<core::type::Pointer>(); |
| auto* el_ty = load->Result()->Type(); |
| auto* el_ptr_ty = ir_.Types().ptr(vec_ptr_ty->AddressSpace(), el_ty, vec_ptr_ty->Access()); |
| auto el_ptr_id = module_.NextId(); |
| current_function_.push_inst( |
| spv::Op::OpAccessChain, |
| {Type(el_ptr_ty), el_ptr_id, Value(load->From()), Value(load->Index())}); |
| current_function_.push_inst(spv::Op::OpLoad, |
| {Type(load->Result()->Type()), Value(load), el_ptr_id}); |
| } |
| |
| /// Emit a loop instruction. |
| /// @param loop the loop instruction to emit |
| void EmitLoop(core::ir::Loop* loop) { |
| auto init_label = loop->HasInitializer() ? Label(loop->Initializer()) : 0; |
| auto body_label = Label(loop->Body()); |
| auto continuing_label = Label(loop->Continuing()); |
| |
| auto header_label = module_.NextId(); |
| TINT_SCOPED_ASSIGNMENT(loop_header_label_, header_label); |
| |
| auto merge_label = GetMergeLabel(loop); |
| TINT_SCOPED_ASSIGNMENT(loop_merge_label_, merge_label); |
| |
| if (init_label != 0) { |
| // Emit the loop initializer. |
| current_function_.push_inst(spv::Op::OpBranch, {init_label}); |
| EmitBlock(loop->Initializer()); |
| } else { |
| // No initializer. Branch to body. |
| current_function_.push_inst(spv::Op::OpBranch, {header_label}); |
| } |
| |
| // Emit the loop body header, which contains the OpLoopMerge and OpPhis. |
| // This then unconditionally branches to body_label |
| current_function_.push_inst(spv::Op::OpLabel, {header_label}); |
| EmitIncomingPhis(loop->Body()); |
| current_function_.push_inst(spv::Op::OpLoopMerge, {merge_label, continuing_label, |
| U32Operand(SpvLoopControlMaskNone)}); |
| current_function_.push_inst(spv::Op::OpBranch, {body_label}); |
| |
| // Emit the loop body |
| current_function_.push_inst(spv::Op::OpLabel, {body_label}); |
| EmitBlockInstructions(loop->Body()); |
| |
| // Emit the loop continuing block. |
| if (loop->Continuing()->Terminator()) { |
| EmitBlock(loop->Continuing()); |
| } else { |
| // We still need to emit a continuing block with a back-edge, even if it is unreachable. |
| current_function_.push_inst(spv::Op::OpLabel, {continuing_label}); |
| current_function_.push_inst(spv::Op::OpBranch, {header_label}); |
| } |
| |
| // Emit the loop merge block. |
| current_function_.push_inst(spv::Op::OpLabel, {merge_label}); |
| |
| // Emit the OpPhis for the ExitLoops |
| EmitExitPhis(loop); |
| } |
| |
| /// Emit a switch instruction. |
| /// @param swtch the switch instruction to emit |
| void EmitSwitch(core::ir::Switch* swtch) { |
| // Find the default selector. There must be exactly one. |
| uint32_t default_label = 0u; |
| for (auto& c : swtch->Cases()) { |
| for (auto& sel : c.selectors) { |
| if (sel.IsDefault()) { |
| default_label = Label(c.block); |
| } |
| } |
| } |
| TINT_ASSERT(default_label != 0u); |
| |
| // Build the operands to the OpSwitch instruction. |
| OperandList switch_operands = {Value(swtch->Condition()), default_label}; |
| for (auto& c : swtch->Cases()) { |
| auto label = Label(c.block); |
| for (auto& sel : c.selectors) { |
| if (sel.IsDefault()) { |
| continue; |
| } |
| switch_operands.push_back(sel.val->Value()->ValueAs<uint32_t>()); |
| switch_operands.push_back(label); |
| } |
| } |
| |
| uint32_t merge_label = GetMergeLabel(swtch); |
| TINT_SCOPED_ASSIGNMENT(switch_merge_label_, merge_label); |
| |
| // Emit the OpSelectionMerge and OpSwitch instructions. |
| current_function_.push_inst(spv::Op::OpSelectionMerge, |
| {merge_label, U32Operand(SpvSelectionControlMaskNone)}); |
| current_function_.push_inst(spv::Op::OpSwitch, switch_operands); |
| |
| // Emit the cases. |
| for (auto& c : swtch->Cases()) { |
| EmitBlock(c.block); |
| } |
| |
| // Emit the switch merge block. |
| current_function_.push_inst(spv::Op::OpLabel, {merge_label}); |
| |
| // Emit the OpPhis for the ExitSwitches |
| EmitExitPhis(swtch); |
| } |
| |
| /// Emit a swizzle instruction. |
| /// @param swizzle the swizzle instruction to emit |
| void EmitSwizzle(core::ir::Swizzle* swizzle) { |
| auto id = Value(swizzle); |
| auto obj = Value(swizzle->Object()); |
| OperandList operands = {Type(swizzle->Result()->Type()), id, obj, obj}; |
| for (auto idx : swizzle->Indices()) { |
| operands.push_back(idx); |
| } |
| current_function_.push_inst(spv::Op::OpVectorShuffle, operands); |
| } |
| |
| /// Emit a store instruction. |
| /// @param store the store instruction to emit |
| void EmitStore(core::ir::Store* store) { |
| current_function_.push_inst(spv::Op::OpStore, {Value(store->To()), Value(store->From())}); |
| } |
| |
| /// Emit a store vector element instruction. |
| /// @param store the store vector element instruction to emit |
| void EmitStoreVectorElement(core::ir::StoreVectorElement* store) { |
| auto* vec_ptr_ty = store->To()->Type()->As<core::type::Pointer>(); |
| auto* el_ty = store->Value()->Type(); |
| auto* el_ptr_ty = ir_.Types().ptr(vec_ptr_ty->AddressSpace(), el_ty, vec_ptr_ty->Access()); |
| auto el_ptr_id = module_.NextId(); |
| current_function_.push_inst( |
| spv::Op::OpAccessChain, |
| {Type(el_ptr_ty), el_ptr_id, Value(store->To()), Value(store->Index())}); |
| current_function_.push_inst(spv::Op::OpStore, {el_ptr_id, Value(store->Value())}); |
| } |
| |
| /// Emit a unary instruction. |
| /// @param unary the unary instruction to emit |
| void EmitUnary(core::ir::Unary* unary) { |
| auto id = Value(unary); |
| auto* ty = unary->Result()->Type(); |
| spv::Op op = spv::Op::Max; |
| switch (unary->Op()) { |
| case core::ir::UnaryOp::kComplement: |
| op = spv::Op::OpNot; |
| break; |
| case core::ir::UnaryOp::kNegation: |
| if (ty->is_float_scalar_or_vector()) { |
| op = spv::Op::OpFNegate; |
| } else if (ty->is_signed_integer_scalar_or_vector()) { |
| op = spv::Op::OpSNegate; |
| } |
| break; |
| } |
| current_function_.push_inst(op, {Type(ty), id, Value(unary->Val())}); |
| } |
| |
| /// Emit a user call instruction. |
| /// @param call the user call instruction to emit |
| void EmitUserCall(core::ir::UserCall* call) { |
| auto id = Value(call); |
| OperandList operands = {Type(call->Result()->Type()), id, Value(call->Target())}; |
| for (auto* arg : call->Args()) { |
| operands.push_back(Value(arg)); |
| } |
| current_function_.push_inst(spv::Op::OpFunctionCall, operands); |
| } |
| |
| /// Emit IO attributes. |
| /// @param id the ID of the variable to decorate |
| /// @param attrs the shader IO attrs |
| /// @param addrspace the address of the variable |
| void EmitIOAttributes(uint32_t id, |
| const core::ir::IOAttributes& attrs, |
| core::AddressSpace addrspace) { |
| if (attrs.location) { |
| module_.PushAnnot(spv::Op::OpDecorate, |
| {id, U32Operand(SpvDecorationLocation), *attrs.location}); |
| } |
| if (attrs.index) { |
| module_.PushAnnot(spv::Op::OpDecorate, |
| {id, U32Operand(SpvDecorationIndex), *attrs.index}); |
| } |
| if (attrs.interpolation) { |
| switch (attrs.interpolation->type) { |
| case core::InterpolationType::kLinear: |
| module_.PushAnnot(spv::Op::OpDecorate, |
| {id, U32Operand(SpvDecorationNoPerspective)}); |
| break; |
| case core::InterpolationType::kFlat: |
| module_.PushAnnot(spv::Op::OpDecorate, {id, U32Operand(SpvDecorationFlat)}); |
| break; |
| case core::InterpolationType::kPerspective: |
| case core::InterpolationType::kUndefined: |
| break; |
| } |
| switch (attrs.interpolation->sampling) { |
| case core::InterpolationSampling::kCentroid: |
| module_.PushAnnot(spv::Op::OpDecorate, {id, U32Operand(SpvDecorationCentroid)}); |
| break; |
| case core::InterpolationSampling::kSample: |
| module_.PushCapability(SpvCapabilitySampleRateShading); |
| module_.PushAnnot(spv::Op::OpDecorate, {id, U32Operand(SpvDecorationSample)}); |
| break; |
| case core::InterpolationSampling::kCenter: |
| case core::InterpolationSampling::kUndefined: |
| break; |
| } |
| } |
| if (attrs.builtin) { |
| module_.PushAnnot(spv::Op::OpDecorate, {id, U32Operand(SpvDecorationBuiltIn), |
| Builtin(*attrs.builtin, addrspace)}); |
| } |
| if (attrs.invariant) { |
| module_.PushAnnot(spv::Op::OpDecorate, {id, U32Operand(SpvDecorationInvariant)}); |
| } |
| } |
| |
| /// Emit a var instruction. |
| /// @param var the var instruction to emit |
| void EmitVar(core::ir::Var* var) { |
| auto id = Value(var); |
| auto* ptr = var->Result()->Type()->As<core::type::Pointer>(); |
| auto* store_ty = ptr->StoreType(); |
| auto ty = Type(ptr); |
| |
| switch (ptr->AddressSpace()) { |
| case core::AddressSpace::kFunction: { |
| TINT_ASSERT(current_function_); |
| if (var->Initializer()) { |
| current_function_.push_var({ty, id, U32Operand(SpvStorageClassFunction)}); |
| current_function_.push_inst(spv::Op::OpStore, {id, Value(var->Initializer())}); |
| } else { |
| current_function_.push_var( |
| {ty, id, U32Operand(SpvStorageClassFunction), ConstantNull(store_ty)}); |
| } |
| break; |
| } |
| case core::AddressSpace::kIn: { |
| TINT_ASSERT(!current_function_); |
| module_.PushType(spv::Op::OpVariable, {ty, id, U32Operand(SpvStorageClassInput)}); |
| EmitIOAttributes(id, var->Attributes(), core::AddressSpace::kIn); |
| break; |
| } |
| case core::AddressSpace::kPrivate: { |
| TINT_ASSERT(!current_function_); |
| OperandList operands = {ty, id, U32Operand(SpvStorageClassPrivate)}; |
| if (var->Initializer()) { |
| TINT_ASSERT(var->Initializer()->Is<core::ir::Constant>()); |
| operands.push_back(Value(var->Initializer())); |
| } else { |
| operands.push_back(ConstantNull(store_ty)); |
| } |
| module_.PushType(spv::Op::OpVariable, operands); |
| break; |
| } |
| case core::AddressSpace::kPushConstant: { |
| TINT_ASSERT(!current_function_); |
| module_.PushType(spv::Op::OpVariable, |
| {ty, id, U32Operand(SpvStorageClassPushConstant)}); |
| break; |
| } |
| case core::AddressSpace::kOut: { |
| TINT_ASSERT(!current_function_); |
| module_.PushType(spv::Op::OpVariable, {ty, id, U32Operand(SpvStorageClassOutput)}); |
| EmitIOAttributes(id, var->Attributes(), core::AddressSpace::kOut); |
| break; |
| } |
| case core::AddressSpace::kHandle: |
| case core::AddressSpace::kStorage: |
| case core::AddressSpace::kUniform: { |
| TINT_ASSERT(!current_function_); |
| module_.PushType(spv::Op::OpVariable, |
| {ty, id, U32Operand(StorageClass(ptr->AddressSpace()))}); |
| auto bp = var->BindingPoint().value(); |
| module_.PushAnnot(spv::Op::OpDecorate, |
| {id, U32Operand(SpvDecorationDescriptorSet), bp.group}); |
| module_.PushAnnot(spv::Op::OpDecorate, |
| {id, U32Operand(SpvDecorationBinding), bp.binding}); |
| |
| // Add NonReadable and NonWritable decorations to storage textures and buffers. |
| auto* st = store_ty->As<core::type::StorageTexture>(); |
| if (st || store_ty->Is<core::type::Struct>()) { |
| auto access = st ? st->access() : ptr->Access(); |
| if (access == core::Access::kRead) { |
| module_.PushAnnot(spv::Op::OpDecorate, |
| {id, U32Operand(SpvDecorationNonWritable)}); |
| } else if (access == core::Access::kWrite) { |
| module_.PushAnnot(spv::Op::OpDecorate, |
| {id, U32Operand(SpvDecorationNonReadable)}); |
| } |
| } |
| break; |
| } |
| case core::AddressSpace::kWorkgroup: { |
| TINT_ASSERT(!current_function_); |
| OperandList operands = {ty, id, U32Operand(SpvStorageClassWorkgroup)}; |
| if (zero_init_workgroup_memory_) { |
| // If requested, use the VK_KHR_zero_initialize_workgroup_memory to |
| // zero-initialize the workgroup variable using an null constant initializer. |
| operands.push_back(ConstantNull(store_ty)); |
| } |
| module_.PushType(spv::Op::OpVariable, operands); |
| break; |
| } |
| default: { |
| TINT_ICE() << "unimplemented variable address space " << ptr->AddressSpace(); |
| } |
| } |
| |
| // Set the name if present. |
| if (auto name = ir_.NameOf(var)) { |
| module_.PushDebug(spv::Op::OpName, {id, Operand(name.Name())}); |
| } |
| } |
| |
| /// Emit a let instruction. |
| /// @param let the let instruction to emit |
| void EmitLet(core::ir::Let* let) { |
| auto id = Value(let->Value()); |
| values_.Add(let->Result(), id); |
| } |
| |
| /// Emit the OpPhis for the given flow control instruction. |
| /// @param inst the flow control instruction |
| void EmitExitPhis(core::ir::ControlInstruction* inst) { |
| struct Branch { |
| uint32_t label = 0; |
| core::ir::Value* value = nullptr; |
| bool operator<(const Branch& other) const { return label < other.label; } |
| }; |
| |
| auto results = inst->Results(); |
| for (size_t index = 0; index < results.Length(); index++) { |
| auto* result = results[index]; |
| auto* ty = result->Type(); |
| |
| Vector<Branch, 8> branches; |
| branches.Reserve(inst->Exits().Count()); |
| for (auto& exit : inst->Exits()) { |
| branches.Push(Branch{GetTerminatorBlockLabel(exit), exit->Args()[index]}); |
| } |
| branches.Sort(); // Sort the branches by label to ensure deterministic output |
| |
| // Also add phi nodes from implicit exit blocks. |
| inst->ForeachBlock([&](core::ir::Block* block) { |
| if (block->IsEmpty()) { |
| branches.Push(Branch{Label(block), nullptr}); |
| } |
| }); |
| |
| OperandList ops{Type(ty), Value(result)}; |
| for (auto& branch : branches) { |
| if (branch.value == nullptr) { |
| ops.push_back(Undef(ty)); |
| } else { |
| ops.push_back(Value(branch.value)); |
| } |
| ops.push_back(branch.label); |
| } |
| current_function_.push_inst(spv::Op::OpPhi, std::move(ops)); |
| } |
| } |
| |
| /// Get the ID of the label of the merge block for a control instruction. |
| /// @param ci the control instruction to get the merge label for |
| /// @returns the label ID |
| uint32_t GetMergeLabel(core::ir::ControlInstruction* ci) { |
| return merge_block_labels_.GetOrCreate(ci, [&] { return module_.NextId(); }); |
| } |
| |
| /// Get the ID of the label of the block that will contain a terminator instruction. |
| /// @param t the terminator instruction to get the block label for |
| /// @returns the label ID |
| uint32_t GetTerminatorBlockLabel(core::ir::Terminator* t) { |
| // Walk backwards from `t` until we find a control instruction. |
| auto* inst = t->prev; |
| while (inst) { |
| auto* prev = inst->prev; |
| if (auto* ci = inst->As<core::ir::ControlInstruction>()) { |
| // This is the last control instruction before `t`, so use its merge block label. |
| return GetMergeLabel(ci); |
| } |
| inst = prev; |
| } |
| |
| // There were no control instructions before `t`, so use the label of the parent block. |
| return Label(t->Block()); |
| } |
| |
| /// Convert a texel format to the corresponding SPIR-V enum value, adding required capabilities. |
| /// @param format the format to convert |
| /// @returns the enum value of the corresponding SPIR-V texel format |
| uint32_t TexelFormat(const core::TexelFormat format) { |
| switch (format) { |
| case core::TexelFormat::kBgra8Unorm: |
| TINT_ICE() << "bgra8unorm should have been polyfilled to rgba8unorm"; |
| return SpvImageFormatUnknown; |
| case core::TexelFormat::kR32Uint: |
| return SpvImageFormatR32ui; |
| case core::TexelFormat::kR32Sint: |
| return SpvImageFormatR32i; |
| case core::TexelFormat::kR32Float: |
| return SpvImageFormatR32f; |
| case core::TexelFormat::kRgba8Unorm: |
| return SpvImageFormatRgba8; |
| case core::TexelFormat::kRgba8Snorm: |
| return SpvImageFormatRgba8Snorm; |
| case core::TexelFormat::kRgba8Uint: |
| return SpvImageFormatRgba8ui; |
| case core::TexelFormat::kRgba8Sint: |
| return SpvImageFormatRgba8i; |
| case core::TexelFormat::kRg32Uint: |
| module_.PushCapability(SpvCapabilityStorageImageExtendedFormats); |
| return SpvImageFormatRg32ui; |
| case core::TexelFormat::kRg32Sint: |
| module_.PushCapability(SpvCapabilityStorageImageExtendedFormats); |
| return SpvImageFormatRg32i; |
| case core::TexelFormat::kRg32Float: |
| module_.PushCapability(SpvCapabilityStorageImageExtendedFormats); |
| return SpvImageFormatRg32f; |
| case core::TexelFormat::kRgba16Uint: |
| return SpvImageFormatRgba16ui; |
| case core::TexelFormat::kRgba16Sint: |
| return SpvImageFormatRgba16i; |
| case core::TexelFormat::kRgba16Float: |
| return SpvImageFormatRgba16f; |
| case core::TexelFormat::kRgba32Uint: |
| return SpvImageFormatRgba32ui; |
| case core::TexelFormat::kRgba32Sint: |
| return SpvImageFormatRgba32i; |
| case core::TexelFormat::kRgba32Float: |
| return SpvImageFormatRgba32f; |
| case core::TexelFormat::kUndefined: |
| return SpvImageFormatUnknown; |
| } |
| return SpvImageFormatUnknown; |
| } |
| }; |
| |
| } // namespace |
| |
| tint::Result<std::vector<uint32_t>> Print(core::ir::Module& module, |
| bool zero_init_workgroup_memory) { |
| return Printer{module, zero_init_workgroup_memory}.Code(); |
| } |
| |
| tint::Result<Module> PrintModule(core::ir::Module& module, bool zero_init_workgroup_memory) { |
| return Printer{module, zero_init_workgroup_memory}.Module(); |
| } |
| |
| } // namespace tint::spirv::writer |