src/tests/end2end/ViewportTests.cpp - dawn - Git at Google

 // Copyright 2019 The Dawn Authors
 //
 // Licensed under the Apache License, Version 2.0 (the "License");
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
 //     http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
 // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 // See the License for the specific language governing permissions and
 // limitations under the License.

 #include "tests/DawnTest.h"

 #include "utils/ComboRenderPipelineDescriptor.h"
 #include "utils/DawnHelpers.h"

 class ViewportTest : public DawnTest {
   protected:
     dawn::RenderPipeline CreatePipelineForTest(dawn::CompareFunction depthCompare) {
         utils::ComboRenderPipelineDescriptor pipelineDescriptor(device);

         // Draw two triangles:
         // 1. The top-left triangle is red. Its depth values are >= 0.5. After viewport is applied,
         // the depth might be >= 0.25 if minDepth is 0 and maxDepth is 0.5.
         // 2. The bottom-right triangle is green. Its depth values are <= 0.5. After viewport is
         // applied, the depth might be <= 0.25 if minDepth is 0 and maxDepth is 0.5.
         const char* vs =
             R"(#version 450
             layout(location = 0) out vec4 color;
             const vec3 pos[6] = vec3[6](vec3(-1.0f,  1.0f, 1.0f),
                                         vec3(-1.0f, -1.0f, 0.5f),
                                         vec3( 1.0f,  1.0f, 0.5f),
                                         vec3( 1.0f,  1.0f, 0.5f),
                                         vec3(-1.0f, -1.0f, 0.5f),
                                         vec3( 1.0f, -1.0f, 0.0f));
             void main() {
                 gl_Position = vec4(pos[gl_VertexIndex], 1.0);
                 if (gl_VertexIndex < 3) {
                     color = vec4(1.0, 0.0, 0.0, 1.0);
                 } else {
                     color = vec4(0.0, 1.0, 0.0, 1.0);
                 }
             })";
         pipelineDescriptor.vertexStage.module =
             utils::CreateShaderModule(device, utils::SingleShaderStage::Vertex, vs);

         const char* fs =
             R"(#version 450
             layout(location = 0) in vec4 color;
             layout(location = 0) out vec4 fragColor;
             void main() {
                fragColor = color;
             })";
         pipelineDescriptor.cFragmentStage.module =
             utils::CreateShaderModule(device, utils::SingleShaderStage::Fragment, fs);

         pipelineDescriptor.cDepthStencilState.depthCompare = depthCompare;
         pipelineDescriptor.depthStencilState = &pipelineDescriptor.cDepthStencilState;

         return device.CreateRenderPipeline(&pipelineDescriptor);
     }

     dawn::Texture Create2DTextureForTest(dawn::TextureFormat format) {
         dawn::TextureDescriptor textureDescriptor;
         textureDescriptor.dimension = dawn::TextureDimension::e2D;
         textureDescriptor.format = format;
         textureDescriptor.usage =
             dawn::TextureUsage::OutputAttachment | dawn::TextureUsage::CopySrc;
         textureDescriptor.arrayLayerCount = 1;
         textureDescriptor.mipLevelCount = 1;
         textureDescriptor.sampleCount = 1;
         textureDescriptor.size = {kSize, kSize, 1};
         return device.CreateTexture(&textureDescriptor);
     }

     enum ColorType {
         TopLeftTriangleColor,
         BottomRightTriangleColor,
         BackgroundColor,

         ColorTypeCount,
     };

     struct ViewportParams {
         float x, y, width, height, minDepth, maxDepth;
     };

     struct TestInfo {
         ViewportParams viewport;
         ColorType topLeftPoint;
         ColorType bottomRightPoint;
         float clearDepth = 1.0f;
         bool setViewport = true;
     };

     void DoTest(const TestInfo& info) {
         dawn::CommandEncoder commandEncoder = device.CreateCommandEncoder();

         // Create render targets for 2 render passes.
         dawn::Texture colorTexture1 = Create2DTextureForTest(dawn::TextureFormat::RGBA8Unorm);
         dawn::Texture depthStencilTexture1 =
             Create2DTextureForTest(dawn::TextureFormat::Depth24PlusStencil8);

         dawn::Texture colorTexture2 = Create2DTextureForTest(dawn::TextureFormat::RGBA8Unorm);
         dawn::Texture depthStencilTexture2 =
             Create2DTextureForTest(dawn::TextureFormat::Depth24PlusStencil8);

         // Create render pass 1
         // Note that we may explicitly call SetViewport() in this pass
         {
             utils::ComboRenderPassDescriptor renderPassDescriptor1(
                 {colorTexture1.CreateView()}, depthStencilTexture1.CreateView());
             renderPassDescriptor1.cColorAttachments[0].clearColor = {0.0, 0.0, 1.0, 1.0};
             renderPassDescriptor1.cColorAttachments[0].loadOp = dawn::LoadOp::Clear;

             renderPassDescriptor1.cDepthStencilAttachmentInfo.clearDepth = info.clearDepth;
             renderPassDescriptor1.cDepthStencilAttachmentInfo.depthLoadOp = dawn::LoadOp::Clear;

             dawn::RenderPassEncoder renderPass1 =
                 commandEncoder.BeginRenderPass(&renderPassDescriptor1);
             renderPass1.SetPipeline(CreatePipelineForTest(dawn::CompareFunction::Less));
             if (info.setViewport) {
                 ViewportParams viewport = info.viewport;
                 renderPass1.SetViewport(viewport.x, viewport.y, viewport.width, viewport.height,
                                         viewport.minDepth, viewport.maxDepth);
             }
             renderPass1.Draw(6, 1, 0, 0);
             renderPass1.EndPass();
         }

         // Create render pass 2
         // Note that we never explicitly call SetViewport() in this pass.
         // Its viewport(x, y, width, height, minDepth, maxDepth) should be
         // (0, 0, rendertarget's width, rendertarget's height, 0.0, 1.0) by default.
         {
             utils::ComboRenderPassDescriptor renderPassDescriptor2(
                 {colorTexture2.CreateView()}, depthStencilTexture2.CreateView());
             renderPassDescriptor2.cColorAttachments[0].clearColor = {0.0, 0.0, 1.0, 1.0};
             renderPassDescriptor2.cColorAttachments[0].loadOp = dawn::LoadOp::Clear;

             renderPassDescriptor2.cDepthStencilAttachmentInfo.clearDepth = 0.5;
             renderPassDescriptor2.cDepthStencilAttachmentInfo.depthLoadOp = dawn::LoadOp::Clear;

             dawn::RenderPassEncoder renderPass2 =
                 commandEncoder.BeginRenderPass(&renderPassDescriptor2);
             renderPass2.SetPipeline(CreatePipelineForTest(dawn::CompareFunction::Greater));
             renderPass2.Draw(6, 1, 0, 0);
             renderPass2.EndPass();
         }

         dawn::CommandBuffer commandBuffer = commandEncoder.Finish();
         dawn::Queue queue = device.CreateQueue();
         queue.Submit(1, &commandBuffer);

         constexpr RGBA8 kColor[ColorTypeCount] = {
             RGBA8(255, 0, 0, 255),  // top-left triangle is red
             RGBA8(0, 255, 0, 255),  // bottom-right triangle is green
             RGBA8(0, 0, 255, 255),  // background is blue
         };

         EXPECT_PIXEL_RGBA8_EQ(kColor[info.topLeftPoint], colorTexture1, 0, 0);
         EXPECT_PIXEL_RGBA8_EQ(kColor[info.bottomRightPoint], colorTexture1, kSize - 1, kSize - 1);

         // In render pass 2. Point(0, 0) is tend to be covered by the top-left triangle. Point(3, 3)
         // is tend to be covered by the bottom-right triangle. However, the bottom-right triangle's
         // depth values are <= 0.5. And the depthCompare is Greater. As a result, point(0, 0) will
         // be drawn as usual, its color is the top-left triangle's color. But point(3, 3) will not
         // be drawn by any triangles. Its color is the backgroud color.
         EXPECT_PIXEL_RGBA8_EQ(kColor[TopLeftTriangleColor], colorTexture2, 0, 0);
         EXPECT_PIXEL_RGBA8_EQ(kColor[BackgroundColor], colorTexture2, kSize - 1, kSize - 1);
     }

     static constexpr uint32_t kSize = 4;
 };

 // The viewport is the same size as the backbuffer if it is not explicitly specified. And minDepth
 // and maxDepth are 0.0 and 1.0 respectively. The viewport parameters below are not really used.
 // Point(0, 0) is covered by the top-left triangle. Likewise, point(3, 3) is covered by the
 // bottom-right triangle.
 TEST_P(ViewportTest, Default) {
     ViewportParams viewport = {0.0, 0.0, 0.0, 0.0, 0.0, 0.0};
     TestInfo info = {viewport, TopLeftTriangleColor, BottomRightTriangleColor, 1.0, false};
     DoTest(info);
 }

 // Explicitly specify the viewport as its default value. The result is the same as it is in the test
 // above.
 TEST_P(ViewportTest, Basic) {
     ViewportParams viewport = {0.0, 0.0, 4.0, 4.0, 0.0, 1.0};
     TestInfo info = {viewport, TopLeftTriangleColor, BottomRightTriangleColor};
     DoTest(info);
 }

 // Shift the viewport toward top-left by (2, 2). So the top-left triangle is outside of the back
 // buffer. We can't see it. And point(0, 0) is covered by the bottom-right triangle now. Point(3, 3)
 // is not covered by any triangles.
 TEST_P(ViewportTest, ShiftToTopLeft) {
     ViewportParams viewport = {-2.0, -2.0, 4.0, 4.0, 0.0, 1.0};
     TestInfo info = {viewport, BottomRightTriangleColor, BackgroundColor};
     DoTest(info);
 }

 // Shift the viewport toward bottom-right by (2, 2). So Point(0, 0) is not covered by any triangles.
 // The top-left triangle is moved to the bottom-right of back buffer. Point(3, 3) is covered by it.
 // While the bottom-right triangle is moved outside of back buffer now.
 TEST_P(ViewportTest, ShiftToBottomRight) {
     ViewportParams viewport = {2.0, 2.0, 4.0, 4.0, 0.0, 1.0};
     TestInfo info = {viewport, BackgroundColor, TopLeftTriangleColor};
     DoTest(info);
 }

 // After applying the minDepth/maxDepth value in viewport and projecting to framebuffer coordinate,
 // depth values of the top-left triangle are >= 0.25. They are greater than the depth values in
 // depth buffer, so it is not drawn at all. As a result, point(0, 0) is not covered by any
 // triangles. But the bottom-right triangle is drawn as usual.
 TEST_P(ViewportTest, ApplyDepth) {
     ViewportParams viewport = {0.0, 0.0, 4.0, 4.0, 0.0, 0.5};
     TestInfo info = {viewport, BackgroundColor, BottomRightTriangleColor, 0.25};
     DoTest(info);
 }

 // Shift the viewport toward top-left by (2, 2). So the top-left triangle is outside of the back
 // buffer. We can't see it. And point(0, 0) is covered by the bottom-right triangle now. Its depth
 // value is < 0.25. So it is drawn as usual. Point(3, 3) is not covered by any triangles.
 TEST_P(ViewportTest, ShiftToTopLeftAndApplyDepth) {
     // Test failing on Linux Vulkan Intel.
     // See https://bugs.chromium.org/p/dawn/issues/detail?id=187
     DAWN_SKIP_TEST_IF(IsLinux() && IsVulkan() && IsIntel());

     ViewportParams viewport = {-2.0, -2.0, 4.0, 4.0, 0.0, 0.5};
     TestInfo info = {viewport, BottomRightTriangleColor, BackgroundColor, 0.25};
     DoTest(info);
 }

 // Shift the viewport toward bottom-right by (2, 2). So point(0, 0) is not covered by any triangles.
 // The top-left triangle is moved to the bottom-right of back buffer. However, depth values of the
 // top-left triangle are >= 0.25. They are greater than the depth values in depth buffer, so it is
 // not drawn at all. So point(3, 3) is not covered by any triangle, either.
 TEST_P(ViewportTest, ShiftToBottomRightAndApplyDepth) {
     ViewportParams viewport = {2.0, 2.0, 4.0, 4.0, 0.0, 0.5};
     TestInfo info = {viewport, BackgroundColor, BackgroundColor, 0.25};
     DoTest(info);
 }

 // Enlarge the viewport by 2 times. So the entire back buffer is covered by the top-left triangle.
 TEST_P(ViewportTest, EnlargeViewport) {
     ViewportParams viewport = {0.0, 0.0, 8.0, 8.0, 0.0, 1.0};
     TestInfo info = {viewport, TopLeftTriangleColor, TopLeftTriangleColor};
     DoTest(info);
 }

 // Enlarge the viewport by 2 times and shift toward top-left by (2, 2). back buffer sits exactly
 // at the center of the whole viewport. So, point(0, 0) is covered by the top-left triangle, and
 // point(3, 3) is covered by the bottom-right triangle.
 TEST_P(ViewportTest, EnlargeViewportAndShiftToTopLeft) {
     ViewportParams viewport = {-2.0, -2.0, 8.0, 8.0, 0.0, 1.0};
     TestInfo info = {viewport, TopLeftTriangleColor, BottomRightTriangleColor};
     DoTest(info);
 }

 // Enlarge the viewport by 2 times and shift toward bottom-right by (2, 2). Point(0, 0) is not
 // covered by any triangle. Point(3, 3) is covered by the top-left triangle.
 TEST_P(ViewportTest, EnlargeViewportAndShiftToBottomRight) {
     ViewportParams viewport = {2.0, 2.0, 8.0, 8.0, 0.0, 1.0};
     TestInfo info = {viewport, BackgroundColor, TopLeftTriangleColor};
     DoTest(info);
 }

 // Enlarge the viewport by 2 times. So the entire back buffer tend to be covered by the top-left
 // triangle. However, depth values of the top-left triangle are >= 0.25. They are greater than the
 // depth values in depth buffer, so the top-left triangle is not drawn at all. As a result, neither
 // point(0, 0) nor point(3, 3) is covered by any triangles.
 TEST_P(ViewportTest, EnlargeViewportAndApplyDepth) {
     ViewportParams viewport = {0.0, 0.0, 8.0, 8.0, 0.0, 0.5};
     TestInfo info = {viewport, BackgroundColor, BackgroundColor, 0.25};
     DoTest(info);
 }

 // Enlarge the viewport by 2 times and shift toward top-left by (2, 2). The back buffer sits exactly
 // at the center of the whole viewport. However, depth values of the top-left triangle are >= 0.25.
 // They are greater than the depth values in depth buffer, so the top-left triangle is not drawn at
 // all. As a result, point(0, 0) is not covered by it. The bottom-right triangle is drawn because
 // its depth values are < 0.25. So point(3, 3) is covered by it as usual.
 TEST_P(ViewportTest, EnlargeViewportAndShiftToTopLeftAndApplyDepth) {
     // Test failing on Linux Vulkan Intel.
     // See https://bugs.chromium.org/p/dawn/issues/detail?id=187
     DAWN_SKIP_TEST_IF(IsLinux() && IsVulkan() && IsIntel());

     ViewportParams viewport = {-2.0, -2.0, 8.0, 8.0, 0.0, 0.5};
     TestInfo info = {viewport, BackgroundColor, BottomRightTriangleColor, 0.25};
     DoTest(info);
 }

 // Enlarge the viewport by 2 times and shift toward bottom-right by (2, 2). Point(0, 0) is not
 // covered by any triangle. The point(3, 3) tend to be covered by the top-left triangle. However,
 // depth values of the top-left triangle are >= 0.25. They are greater than the depth values in
 // depth buffer, so the top-left triangle is not drawn at all. As a result, point(3, 3) is not
 // covered by any triangle, either.
 TEST_P(ViewportTest, EnlargeViewportAndShiftToBottomRightAndApplyDepth) {
     ViewportParams viewport = {2.0, 2.0, 8.0, 8.0, 0.0, 0.5};
     TestInfo info = {viewport, BackgroundColor, BackgroundColor, 0.25};
     DoTest(info);
 }

 // Shrink the viewport to its half. So point(0, 0) is covered by the top-left triangle, while
 // point(3, 3) is not covered by any triangles because the drawing area is too small to cover the
 // entire back buffer.
 TEST_P(ViewportTest, ShrinkViewport) {
     ViewportParams viewport = {0.0, 0.0, 2.0, 2.0, 0.0, 1.0};
     TestInfo info = {viewport, TopLeftTriangleColor, BackgroundColor};
     DoTest(info);
 }

 // Shrink the viewport to its half and move toward top-left by (1, 1), So point(0, 0) is covered by
 // bottom-right triangle, while point(3, 3) is not covered by any triangles.
 TEST_P(ViewportTest, ShrinkViewportAndShiftToTopLeft) {
     ViewportParams viewport = {-1.0, -1.0, 2.0, 2.0, 0.0, 1.0};
     TestInfo info = {viewport, BottomRightTriangleColor, BackgroundColor};
     DoTest(info);
 }

 // Shrink the viewport to its half and move toward bottom-right by (3, 3), So point(0, 0) is not
 // covered by any triangles, and point(3, 3) is covered by the bottom-right triangle.
 TEST_P(ViewportTest, ShrinkViewportAndShiftToBottomRight) {
     ViewportParams viewport = {3.0, 3.0, 2.0, 2.0, 0.0, 1.0};
     TestInfo info = {viewport, BackgroundColor, TopLeftTriangleColor};
     DoTest(info);
 }

 // Shrink the viewport to its half. So point(0, 0) is tend to be covered by top-left triangle.
 // However, depth values of the top-left triangle are >= 0.25. They are greater than the depth
 // values in depth buffer, so the top-left triangle is not drawn at all. As a result, point(0, 0)
 // is not covered by any triangle. Point(3, 3) is not covered by any triangles, either. Because the
 // drawing area is too small to cover the entire back buffer.
 TEST_P(ViewportTest, ShrinkViewportAndApplyDepth) {
     ViewportParams viewport = {0.0, 0.0, 2.0, 2.0, 0.0, 0.5};
     TestInfo info = {viewport, BackgroundColor, BackgroundColor, 0.25};
     DoTest(info);
 }

 // Shrink the viewport to its half and move toward top-left by (1, 1), So point(0, 0) is covered by
 // the bottom-right triangle, while point(3, 3) is not covered by any triangles.
 TEST_P(ViewportTest, ShrinkViewportAndShiftToTopLeftAndApplyDepth) {
     // Test failing on Linux Vulkan Intel.
     // See https://bugs.chromium.org/p/dawn/issues/detail?id=187
     DAWN_SKIP_TEST_IF(IsLinux() && IsVulkan() && IsIntel());

     ViewportParams viewport = {-1.0, -1.0, 2.0, 2.0, 0.0, 0.5};
     TestInfo info = {viewport, BottomRightTriangleColor, BackgroundColor, 0.25};
     DoTest(info);
 }

 // Shrink the viewport to its half and move toward bottom-right by (3, 3), So point(0, 0) is not
 // covered by any triangle. Point(3, 3) is tend to be covered by the top-left triangle. However,
 // depth values of the top-left triangle are >= 0.25. They are greater than the depth values in
 // depth buffer, so the top-left triangle is not drawn at all. As a result, point(3, 3) is not
 // covered by any triangle, either.
 TEST_P(ViewportTest, ShrinkViewportAndShiftToBottomRightAndApplyDepth) {
     ViewportParams viewport = {3.0, 3.0, 2.0, 2.0, 0.0, 0.5};
     TestInfo info = {viewport, BackgroundColor, BackgroundColor, 0.25};
     DoTest(info);
 }

 // X and y have fractions and they are smaller than 0.5, which is the center of point(0, 0). So
 // point(0, 0) is covered by the top left triangle as usual.
 TEST_P(ViewportTest, DoNotTruncateXAndY) {
     ViewportParams viewport = {0.49, 0.49, 4.0, 4.0, 0.0, 1.0};
     TestInfo info = {viewport, TopLeftTriangleColor, BottomRightTriangleColor};
     DoTest(info);
 }

 // X and y have fractions and they are not smaller than 0.5, which is the center of point(0, 0). So
 // point(0, 0) is not covered by any trinagle.
 TEST_P(ViewportTest, DoNotTruncateXAndY2) {
     ViewportParams viewport = {0.5, 0.5, 4.0, 4.0, 0.0, 1.0};
     TestInfo info = {viewport, BackgroundColor, BottomRightTriangleColor};
     DoTest(info);
 }

 // Width and height have fractions and they are greater than 3.5, which is the center of
 // point(3, 3). So point(3, 3) is covered by the bottom right triangle as usual.
 TEST_P(ViewportTest, DoNotTruncateWidthAndHeight) {
     // Test failing on Intel devices (D3D, Vulkan and Metal) and D3D12.
     // See https://bugs.chromium.org/p/dawn/issues/detail?id=205
     DAWN_SKIP_TEST_IF(IsIntel() || IsD3D12());
     ViewportParams viewport = {0.0, 0.0, 3.51, 3.51, 0.0, 1.0};
     TestInfo info = {viewport, TopLeftTriangleColor, BottomRightTriangleColor};
     DoTest(info);
 }

 // Width and height have fractions and they are not greater than 3.5, which is the center of
 // point(3, 3). So point(3, 3) is not covered by any triangle.
 TEST_P(ViewportTest, DoNotTruncateWidthAndHeight2) {
     ViewportParams viewport = {0.0, 0.0, 3.5, 3.5, 0.0, 1.0};
     TestInfo info = {viewport, TopLeftTriangleColor, BackgroundColor};
     DoTest(info);
 }

 DAWN_INSTANTIATE_TEST(ViewportTest, D3D12Backend, MetalBackend, OpenGLBackend, VulkanBackend);
	// Copyright 2019 The Dawn Authors
	//
	// Licensed under the Apache License, Version 2.0 (the "License");
	// you may not use this file except in compliance with the License.
	// You may obtain a copy of the License at
	//
	// http://www.apache.org/licenses/LICENSE-2.0
	//
	// Unless required by applicable law or agreed to in writing, software
	// distributed under the License is distributed on an "AS IS" BASIS,
	// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	// See the License for the specific language governing permissions and
	// limitations under the License.

	#include "tests/DawnTest.h"

	#include "utils/ComboRenderPipelineDescriptor.h"
	#include "utils/DawnHelpers.h"

	class ViewportTest : public DawnTest {
	protected:
	dawn::RenderPipeline CreatePipelineForTest(dawn::CompareFunction depthCompare) {
	utils::ComboRenderPipelineDescriptor pipelineDescriptor(device);

	// Draw two triangles:
	// 1. The top-left triangle is red. Its depth values are >= 0.5. After viewport is applied,
	// the depth might be >= 0.25 if minDepth is 0 and maxDepth is 0.5.
	// 2. The bottom-right triangle is green. Its depth values are <= 0.5. After viewport is
	// applied, the depth might be <= 0.25 if minDepth is 0 and maxDepth is 0.5.
	const char* vs =
	R"(#version 450
	layout(location = 0) out vec4 color;
	const vec3 pos[6] = vec3[6](vec3(-1.0f, 1.0f, 1.0f),
	vec3(-1.0f, -1.0f, 0.5f),
	vec3( 1.0f, 1.0f, 0.5f),
	vec3( 1.0f, 1.0f, 0.5f),
	vec3(-1.0f, -1.0f, 0.5f),
	vec3( 1.0f, -1.0f, 0.0f));
	void main() {
	gl_Position = vec4(pos[gl_VertexIndex], 1.0);
	if (gl_VertexIndex < 3) {
	color = vec4(1.0, 0.0, 0.0, 1.0);
	} else {
	color = vec4(0.0, 1.0, 0.0, 1.0);
	}
	})";
	pipelineDescriptor.vertexStage.module =
	utils::CreateShaderModule(device, utils::SingleShaderStage::Vertex, vs);

	const char* fs =
	R"(#version 450
	layout(location = 0) in vec4 color;
	layout(location = 0) out vec4 fragColor;
	void main() {
	fragColor = color;
	})";
	pipelineDescriptor.cFragmentStage.module =
	utils::CreateShaderModule(device, utils::SingleShaderStage::Fragment, fs);

	pipelineDescriptor.cDepthStencilState.depthCompare = depthCompare;
	pipelineDescriptor.depthStencilState = &pipelineDescriptor.cDepthStencilState;

	return device.CreateRenderPipeline(&pipelineDescriptor);
	}

	dawn::Texture Create2DTextureForTest(dawn::TextureFormat format) {
	dawn::TextureDescriptor textureDescriptor;
	textureDescriptor.dimension = dawn::TextureDimension::e2D;
	textureDescriptor.format = format;
	textureDescriptor.usage =
	dawn::TextureUsage::OutputAttachment \| dawn::TextureUsage::CopySrc;
	textureDescriptor.arrayLayerCount = 1;
	textureDescriptor.mipLevelCount = 1;
	textureDescriptor.sampleCount = 1;
	textureDescriptor.size = {kSize, kSize, 1};
	return device.CreateTexture(&textureDescriptor);
	}

	enum ColorType {
	TopLeftTriangleColor,
	BottomRightTriangleColor,
	BackgroundColor,

	ColorTypeCount,
	};

	struct ViewportParams {
	float x, y, width, height, minDepth, maxDepth;
	};

	struct TestInfo {
	ViewportParams viewport;
	ColorType topLeftPoint;
	ColorType bottomRightPoint;
	float clearDepth = 1.0f;
	bool setViewport = true;
	};

	void DoTest(const TestInfo& info) {
	dawn::CommandEncoder commandEncoder = device.CreateCommandEncoder();

	// Create render targets for 2 render passes.
	dawn::Texture colorTexture1 = Create2DTextureForTest(dawn::TextureFormat::RGBA8Unorm);
	dawn::Texture depthStencilTexture1 =
	Create2DTextureForTest(dawn::TextureFormat::Depth24PlusStencil8);

	dawn::Texture colorTexture2 = Create2DTextureForTest(dawn::TextureFormat::RGBA8Unorm);
	dawn::Texture depthStencilTexture2 =
	Create2DTextureForTest(dawn::TextureFormat::Depth24PlusStencil8);

	// Create render pass 1
	// Note that we may explicitly call SetViewport() in this pass
	{
	utils::ComboRenderPassDescriptor renderPassDescriptor1(
	{colorTexture1.CreateView()}, depthStencilTexture1.CreateView());
	renderPassDescriptor1.cColorAttachments[0].clearColor = {0.0, 0.0, 1.0, 1.0};
	renderPassDescriptor1.cColorAttachments[0].loadOp = dawn::LoadOp::Clear;

	renderPassDescriptor1.cDepthStencilAttachmentInfo.clearDepth = info.clearDepth;
	renderPassDescriptor1.cDepthStencilAttachmentInfo.depthLoadOp = dawn::LoadOp::Clear;

	dawn::RenderPassEncoder renderPass1 =
	commandEncoder.BeginRenderPass(&renderPassDescriptor1);
	renderPass1.SetPipeline(CreatePipelineForTest(dawn::CompareFunction::Less));
	if (info.setViewport) {
	ViewportParams viewport = info.viewport;
	renderPass1.SetViewport(viewport.x, viewport.y, viewport.width, viewport.height,
	viewport.minDepth, viewport.maxDepth);
	}
	renderPass1.Draw(6, 1, 0, 0);
	renderPass1.EndPass();
	}

	// Create render pass 2
	// Note that we never explicitly call SetViewport() in this pass.
	// Its viewport(x, y, width, height, minDepth, maxDepth) should be
	// (0, 0, rendertarget's width, rendertarget's height, 0.0, 1.0) by default.
	{
	utils::ComboRenderPassDescriptor renderPassDescriptor2(
	{colorTexture2.CreateView()}, depthStencilTexture2.CreateView());
	renderPassDescriptor2.cColorAttachments[0].clearColor = {0.0, 0.0, 1.0, 1.0};
	renderPassDescriptor2.cColorAttachments[0].loadOp = dawn::LoadOp::Clear;

	renderPassDescriptor2.cDepthStencilAttachmentInfo.clearDepth = 0.5;
	renderPassDescriptor2.cDepthStencilAttachmentInfo.depthLoadOp = dawn::LoadOp::Clear;

	dawn::RenderPassEncoder renderPass2 =
	commandEncoder.BeginRenderPass(&renderPassDescriptor2);
	renderPass2.SetPipeline(CreatePipelineForTest(dawn::CompareFunction::Greater));
	renderPass2.Draw(6, 1, 0, 0);
	renderPass2.EndPass();
	}

	dawn::CommandBuffer commandBuffer = commandEncoder.Finish();
	dawn::Queue queue = device.CreateQueue();
	queue.Submit(1, &commandBuffer);

	constexpr RGBA8 kColor[ColorTypeCount] = {
	RGBA8(255, 0, 0, 255), // top-left triangle is red
	RGBA8(0, 255, 0, 255), // bottom-right triangle is green
	RGBA8(0, 0, 255, 255), // background is blue
	};

	EXPECT_PIXEL_RGBA8_EQ(kColor[info.topLeftPoint], colorTexture1, 0, 0);
	EXPECT_PIXEL_RGBA8_EQ(kColor[info.bottomRightPoint], colorTexture1, kSize - 1, kSize - 1);

	// In render pass 2. Point(0, 0) is tend to be covered by the top-left triangle. Point(3, 3)
	// is tend to be covered by the bottom-right triangle. However, the bottom-right triangle's
	// depth values are <= 0.5. And the depthCompare is Greater. As a result, point(0, 0) will
	// be drawn as usual, its color is the top-left triangle's color. But point(3, 3) will not
	// be drawn by any triangles. Its color is the backgroud color.
	EXPECT_PIXEL_RGBA8_EQ(kColor[TopLeftTriangleColor], colorTexture2, 0, 0);
	EXPECT_PIXEL_RGBA8_EQ(kColor[BackgroundColor], colorTexture2, kSize - 1, kSize - 1);
	}

	static constexpr uint32_t kSize = 4;
	};

	// The viewport is the same size as the backbuffer if it is not explicitly specified. And minDepth
	// and maxDepth are 0.0 and 1.0 respectively. The viewport parameters below are not really used.
	// Point(0, 0) is covered by the top-left triangle. Likewise, point(3, 3) is covered by the
	// bottom-right triangle.
	TEST_P(ViewportTest, Default) {
	ViewportParams viewport = {0.0, 0.0, 0.0, 0.0, 0.0, 0.0};
	TestInfo info = {viewport, TopLeftTriangleColor, BottomRightTriangleColor, 1.0, false};
	DoTest(info);
	}

	// Explicitly specify the viewport as its default value. The result is the same as it is in the test
	// above.
	TEST_P(ViewportTest, Basic) {
	ViewportParams viewport = {0.0, 0.0, 4.0, 4.0, 0.0, 1.0};
	TestInfo info = {viewport, TopLeftTriangleColor, BottomRightTriangleColor};
	DoTest(info);
	}

	// Shift the viewport toward top-left by (2, 2). So the top-left triangle is outside of the back
	// buffer. We can't see it. And point(0, 0) is covered by the bottom-right triangle now. Point(3, 3)
	// is not covered by any triangles.
	TEST_P(ViewportTest, ShiftToTopLeft) {
	ViewportParams viewport = {-2.0, -2.0, 4.0, 4.0, 0.0, 1.0};
	TestInfo info = {viewport, BottomRightTriangleColor, BackgroundColor};
	DoTest(info);
	}

	// Shift the viewport toward bottom-right by (2, 2). So Point(0, 0) is not covered by any triangles.
	// The top-left triangle is moved to the bottom-right of back buffer. Point(3, 3) is covered by it.
	// While the bottom-right triangle is moved outside of back buffer now.
	TEST_P(ViewportTest, ShiftToBottomRight) {
	ViewportParams viewport = {2.0, 2.0, 4.0, 4.0, 0.0, 1.0};
	TestInfo info = {viewport, BackgroundColor, TopLeftTriangleColor};
	DoTest(info);
	}

	// After applying the minDepth/maxDepth value in viewport and projecting to framebuffer coordinate,
	// depth values of the top-left triangle are >= 0.25. They are greater than the depth values in
	// depth buffer, so it is not drawn at all. As a result, point(0, 0) is not covered by any
	// triangles. But the bottom-right triangle is drawn as usual.
	TEST_P(ViewportTest, ApplyDepth) {
	ViewportParams viewport = {0.0, 0.0, 4.0, 4.0, 0.0, 0.5};
	TestInfo info = {viewport, BackgroundColor, BottomRightTriangleColor, 0.25};
	DoTest(info);
	}

	// Shift the viewport toward top-left by (2, 2). So the top-left triangle is outside of the back
	// buffer. We can't see it. And point(0, 0) is covered by the bottom-right triangle now. Its depth
	// value is < 0.25. So it is drawn as usual. Point(3, 3) is not covered by any triangles.
	TEST_P(ViewportTest, ShiftToTopLeftAndApplyDepth) {
	// Test failing on Linux Vulkan Intel.
	// See https://bugs.chromium.org/p/dawn/issues/detail?id=187
	DAWN_SKIP_TEST_IF(IsLinux() && IsVulkan() && IsIntel());

	ViewportParams viewport = {-2.0, -2.0, 4.0, 4.0, 0.0, 0.5};
	TestInfo info = {viewport, BottomRightTriangleColor, BackgroundColor, 0.25};
	DoTest(info);
	}

	// Shift the viewport toward bottom-right by (2, 2). So point(0, 0) is not covered by any triangles.
	// The top-left triangle is moved to the bottom-right of back buffer. However, depth values of the
	// top-left triangle are >= 0.25. They are greater than the depth values in depth buffer, so it is
	// not drawn at all. So point(3, 3) is not covered by any triangle, either.
	TEST_P(ViewportTest, ShiftToBottomRightAndApplyDepth) {
	ViewportParams viewport = {2.0, 2.0, 4.0, 4.0, 0.0, 0.5};
	TestInfo info = {viewport, BackgroundColor, BackgroundColor, 0.25};
	DoTest(info);
	}

	// Enlarge the viewport by 2 times. So the entire back buffer is covered by the top-left triangle.
	TEST_P(ViewportTest, EnlargeViewport) {
	ViewportParams viewport = {0.0, 0.0, 8.0, 8.0, 0.0, 1.0};
	TestInfo info = {viewport, TopLeftTriangleColor, TopLeftTriangleColor};
	DoTest(info);
	}

	// Enlarge the viewport by 2 times and shift toward top-left by (2, 2). back buffer sits exactly
	// at the center of the whole viewport. So, point(0, 0) is covered by the top-left triangle, and
	// point(3, 3) is covered by the bottom-right triangle.
	TEST_P(ViewportTest, EnlargeViewportAndShiftToTopLeft) {
	ViewportParams viewport = {-2.0, -2.0, 8.0, 8.0, 0.0, 1.0};
	TestInfo info = {viewport, TopLeftTriangleColor, BottomRightTriangleColor};
	DoTest(info);
	}

	// Enlarge the viewport by 2 times and shift toward bottom-right by (2, 2). Point(0, 0) is not
	// covered by any triangle. Point(3, 3) is covered by the top-left triangle.
	TEST_P(ViewportTest, EnlargeViewportAndShiftToBottomRight) {
	ViewportParams viewport = {2.0, 2.0, 8.0, 8.0, 0.0, 1.0};
	TestInfo info = {viewport, BackgroundColor, TopLeftTriangleColor};
	DoTest(info);
	}

	// Enlarge the viewport by 2 times. So the entire back buffer tend to be covered by the top-left
	// triangle. However, depth values of the top-left triangle are >= 0.25. They are greater than the
	// depth values in depth buffer, so the top-left triangle is not drawn at all. As a result, neither
	// point(0, 0) nor point(3, 3) is covered by any triangles.
	TEST_P(ViewportTest, EnlargeViewportAndApplyDepth) {
	ViewportParams viewport = {0.0, 0.0, 8.0, 8.0, 0.0, 0.5};
	TestInfo info = {viewport, BackgroundColor, BackgroundColor, 0.25};
	DoTest(info);
	}

	// Enlarge the viewport by 2 times and shift toward top-left by (2, 2). The back buffer sits exactly
	// at the center of the whole viewport. However, depth values of the top-left triangle are >= 0.25.
	// They are greater than the depth values in depth buffer, so the top-left triangle is not drawn at
	// all. As a result, point(0, 0) is not covered by it. The bottom-right triangle is drawn because
	// its depth values are < 0.25. So point(3, 3) is covered by it as usual.
	TEST_P(ViewportTest, EnlargeViewportAndShiftToTopLeftAndApplyDepth) {
	// Test failing on Linux Vulkan Intel.
	// See https://bugs.chromium.org/p/dawn/issues/detail?id=187
	DAWN_SKIP_TEST_IF(IsLinux() && IsVulkan() && IsIntel());

	ViewportParams viewport = {-2.0, -2.0, 8.0, 8.0, 0.0, 0.5};
	TestInfo info = {viewport, BackgroundColor, BottomRightTriangleColor, 0.25};
	DoTest(info);
	}

	// Enlarge the viewport by 2 times and shift toward bottom-right by (2, 2). Point(0, 0) is not
	// covered by any triangle. The point(3, 3) tend to be covered by the top-left triangle. However,
	// depth values of the top-left triangle are >= 0.25. They are greater than the depth values in
	// depth buffer, so the top-left triangle is not drawn at all. As a result, point(3, 3) is not
	// covered by any triangle, either.
	TEST_P(ViewportTest, EnlargeViewportAndShiftToBottomRightAndApplyDepth) {
	ViewportParams viewport = {2.0, 2.0, 8.0, 8.0, 0.0, 0.5};
	TestInfo info = {viewport, BackgroundColor, BackgroundColor, 0.25};
	DoTest(info);
	}

	// Shrink the viewport to its half. So point(0, 0) is covered by the top-left triangle, while
	// point(3, 3) is not covered by any triangles because the drawing area is too small to cover the
	// entire back buffer.
	TEST_P(ViewportTest, ShrinkViewport) {
	ViewportParams viewport = {0.0, 0.0, 2.0, 2.0, 0.0, 1.0};
	TestInfo info = {viewport, TopLeftTriangleColor, BackgroundColor};
	DoTest(info);
	}

	// Shrink the viewport to its half and move toward top-left by (1, 1), So point(0, 0) is covered by
	// bottom-right triangle, while point(3, 3) is not covered by any triangles.
	TEST_P(ViewportTest, ShrinkViewportAndShiftToTopLeft) {
	ViewportParams viewport = {-1.0, -1.0, 2.0, 2.0, 0.0, 1.0};
	TestInfo info = {viewport, BottomRightTriangleColor, BackgroundColor};
	DoTest(info);
	}

	// Shrink the viewport to its half and move toward bottom-right by (3, 3), So point(0, 0) is not
	// covered by any triangles, and point(3, 3) is covered by the bottom-right triangle.
	TEST_P(ViewportTest, ShrinkViewportAndShiftToBottomRight) {
	ViewportParams viewport = {3.0, 3.0, 2.0, 2.0, 0.0, 1.0};
	TestInfo info = {viewport, BackgroundColor, TopLeftTriangleColor};
	DoTest(info);
	}

	// Shrink the viewport to its half. So point(0, 0) is tend to be covered by top-left triangle.
	// However, depth values of the top-left triangle are >= 0.25. They are greater than the depth
	// values in depth buffer, so the top-left triangle is not drawn at all. As a result, point(0, 0)
	// is not covered by any triangle. Point(3, 3) is not covered by any triangles, either. Because the
	// drawing area is too small to cover the entire back buffer.
	TEST_P(ViewportTest, ShrinkViewportAndApplyDepth) {
	ViewportParams viewport = {0.0, 0.0, 2.0, 2.0, 0.0, 0.5};
	TestInfo info = {viewport, BackgroundColor, BackgroundColor, 0.25};
	DoTest(info);
	}

	// Shrink the viewport to its half and move toward top-left by (1, 1), So point(0, 0) is covered by
	// the bottom-right triangle, while point(3, 3) is not covered by any triangles.
	TEST_P(ViewportTest, ShrinkViewportAndShiftToTopLeftAndApplyDepth) {
	// Test failing on Linux Vulkan Intel.
	// See https://bugs.chromium.org/p/dawn/issues/detail?id=187
	DAWN_SKIP_TEST_IF(IsLinux() && IsVulkan() && IsIntel());

	ViewportParams viewport = {-1.0, -1.0, 2.0, 2.0, 0.0, 0.5};
	TestInfo info = {viewport, BottomRightTriangleColor, BackgroundColor, 0.25};
	DoTest(info);
	}

	// Shrink the viewport to its half and move toward bottom-right by (3, 3), So point(0, 0) is not
	// covered by any triangle. Point(3, 3) is tend to be covered by the top-left triangle. However,
	// depth values of the top-left triangle are >= 0.25. They are greater than the depth values in
	// depth buffer, so the top-left triangle is not drawn at all. As a result, point(3, 3) is not
	// covered by any triangle, either.
	TEST_P(ViewportTest, ShrinkViewportAndShiftToBottomRightAndApplyDepth) {
	ViewportParams viewport = {3.0, 3.0, 2.0, 2.0, 0.0, 0.5};
	TestInfo info = {viewport, BackgroundColor, BackgroundColor, 0.25};
	DoTest(info);
	}

	// X and y have fractions and they are smaller than 0.5, which is the center of point(0, 0). So
	// point(0, 0) is covered by the top left triangle as usual.
	TEST_P(ViewportTest, DoNotTruncateXAndY) {
	ViewportParams viewport = {0.49, 0.49, 4.0, 4.0, 0.0, 1.0};
	TestInfo info = {viewport, TopLeftTriangleColor, BottomRightTriangleColor};
	DoTest(info);
	}

	// X and y have fractions and they are not smaller than 0.5, which is the center of point(0, 0). So
	// point(0, 0) is not covered by any trinagle.
	TEST_P(ViewportTest, DoNotTruncateXAndY2) {
	ViewportParams viewport = {0.5, 0.5, 4.0, 4.0, 0.0, 1.0};
	TestInfo info = {viewport, BackgroundColor, BottomRightTriangleColor};
	DoTest(info);
	}

	// Width and height have fractions and they are greater than 3.5, which is the center of
	// point(3, 3). So point(3, 3) is covered by the bottom right triangle as usual.
	TEST_P(ViewportTest, DoNotTruncateWidthAndHeight) {
	// Test failing on Intel devices (D3D, Vulkan and Metal) and D3D12.
	// See https://bugs.chromium.org/p/dawn/issues/detail?id=205
	DAWN_SKIP_TEST_IF(IsIntel() \|\| IsD3D12());
	ViewportParams viewport = {0.0, 0.0, 3.51, 3.51, 0.0, 1.0};
	TestInfo info = {viewport, TopLeftTriangleColor, BottomRightTriangleColor};
	DoTest(info);
	}

	// Width and height have fractions and they are not greater than 3.5, which is the center of
	// point(3, 3). So point(3, 3) is not covered by any triangle.
	TEST_P(ViewportTest, DoNotTruncateWidthAndHeight2) {
	ViewportParams viewport = {0.0, 0.0, 3.5, 3.5, 0.0, 1.0};
	TestInfo info = {viewport, TopLeftTriangleColor, BackgroundColor};
	DoTest(info);
	}

	DAWN_INSTANTIATE_TEST(ViewportTest, D3D12Backend, MetalBackend, OpenGLBackend, VulkanBackend);