| // Copyright 2017 The Dawn Authors |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "tests/unittests/validation/ValidationTest.h" |
| |
| #include "utils/DawnHelpers.h" |
| |
| // Maximums for Dawn, tests will start failing when this changes |
| static constexpr uint32_t kMaxVertexAttributes = 16u; |
| static constexpr uint32_t kMaxVertexInputs = 16u; |
| |
| class InputStateTest : public ValidationTest { |
| protected: |
| dawn::RenderPipeline CreatePipeline(bool success, const dawn::InputState& inputState, std::string vertexSource) { |
| DummyRenderPass renderpassData = CreateDummyRenderPass(); |
| |
| dawn::ShaderModule vsModule = utils::CreateShaderModule(device, dawn::ShaderStage::Vertex, vertexSource.c_str()); |
| dawn::ShaderModule fsModule = utils::CreateShaderModule(device, dawn::ShaderStage::Fragment, R"( |
| #version 450 |
| layout(location = 0) out vec4 fragColor; |
| void main() { |
| fragColor = vec4(1.0, 0.0, 0.0, 1.0); |
| } |
| )"); |
| |
| dawn::RenderPipelineBuilder builder; |
| if (success) { |
| builder = AssertWillBeSuccess(device.CreateRenderPipelineBuilder()); |
| } else { |
| builder = AssertWillBeError(device.CreateRenderPipelineBuilder()); |
| } |
| |
| return builder.SetColorAttachmentFormat(0, renderpassData.attachmentFormat) |
| .SetStage(dawn::ShaderStage::Vertex, vsModule, "main") |
| .SetStage(dawn::ShaderStage::Fragment, fsModule, "main") |
| .SetInputState(inputState) |
| .GetResult(); |
| } |
| }; |
| |
| // Check an empty input state is valid |
| TEST_F(InputStateTest, EmptyIsOk) { |
| dawn::InputState state = AssertWillBeSuccess(device.CreateInputStateBuilder()) |
| .GetResult(); |
| |
| CreatePipeline(true, state, R"( |
| #version 450 |
| void main() { |
| gl_Position = vec4(0.0); |
| } |
| )"); |
| } |
| |
| // Check validation that pipeline vertex inputs are backed by attributes in the input state |
| TEST_F(InputStateTest, PipelineCompatibility) { |
| dawn::InputState state = AssertWillBeSuccess(device.CreateInputStateBuilder()) |
| .SetInput(0, 2 * sizeof(float), dawn::InputStepMode::Vertex) |
| .SetAttribute(0, 0, dawn::VertexFormat::FloatR32, 0) |
| .SetAttribute(1, 0, dawn::VertexFormat::FloatR32, sizeof(float)) |
| .GetResult(); |
| |
| // Control case: pipeline with one input per attribute |
| CreatePipeline(true, state, R"( |
| #version 450 |
| layout(location = 0) in vec4 a; |
| layout(location = 1) in vec4 b; |
| void main() { |
| gl_Position = vec4(0.0); |
| } |
| )"); |
| |
| // Check it is valid for the pipeline to use a subset of the InputState |
| CreatePipeline(true, state, R"( |
| #version 450 |
| layout(location = 0) in vec4 a; |
| void main() { |
| gl_Position = vec4(0.0); |
| } |
| )"); |
| |
| // Check for an error when the pipeline uses an attribute not in the input state |
| CreatePipeline(false, state, R"( |
| #version 450 |
| layout(location = 2) in vec4 a; |
| void main() { |
| gl_Position = vec4(0.0); |
| } |
| )"); |
| } |
| |
| // Test that a stride of 0 is valid |
| TEST_F(InputStateTest, StrideZero) { |
| // Works ok without attributes |
| AssertWillBeSuccess(device.CreateInputStateBuilder()) |
| .SetInput(0, 0, dawn::InputStepMode::Vertex) |
| .GetResult(); |
| |
| // Works ok with attributes at a large-ish offset |
| AssertWillBeSuccess(device.CreateInputStateBuilder()) |
| .SetInput(0, 0, dawn::InputStepMode::Vertex) |
| .SetAttribute(0, 0, dawn::VertexFormat::FloatR32, 128) |
| .GetResult(); |
| } |
| |
| // Test that we cannot set an already set input |
| TEST_F(InputStateTest, AlreadySetInput) { |
| // Control case |
| AssertWillBeSuccess(device.CreateInputStateBuilder()) |
| .SetInput(0, 0, dawn::InputStepMode::Vertex) |
| .GetResult(); |
| |
| // Oh no, input 0 is set twice |
| AssertWillBeError(device.CreateInputStateBuilder()) |
| .SetInput(0, 0, dawn::InputStepMode::Vertex) |
| .SetInput(0, 0, dawn::InputStepMode::Vertex) |
| .GetResult(); |
| } |
| |
| // Check out of bounds condition on SetInput |
| TEST_F(InputStateTest, SetInputOutOfBounds) { |
| // Control case, setting last input |
| AssertWillBeSuccess(device.CreateInputStateBuilder()) |
| .SetInput(kMaxVertexInputs - 1, 0, dawn::InputStepMode::Vertex) |
| .GetResult(); |
| |
| // Test OOB |
| AssertWillBeError(device.CreateInputStateBuilder()) |
| .SetInput(kMaxVertexInputs, 0, dawn::InputStepMode::Vertex) |
| .GetResult(); |
| } |
| |
| // Test that we cannot set an already set attribute |
| TEST_F(InputStateTest, AlreadySetAttribute) { |
| // Control case, setting last attribute |
| AssertWillBeSuccess(device.CreateInputStateBuilder()) |
| .SetInput(0, 0, dawn::InputStepMode::Vertex) |
| .SetAttribute(0, 0, dawn::VertexFormat::FloatR32, 0) |
| .GetResult(); |
| |
| // Oh no, attribute 0 is set twice |
| AssertWillBeError(device.CreateInputStateBuilder()) |
| .SetInput(0, 0, dawn::InputStepMode::Vertex) |
| .SetAttribute(0, 0, dawn::VertexFormat::FloatR32, 0) |
| .SetAttribute(0, 0, dawn::VertexFormat::FloatR32, 0) |
| .GetResult(); |
| } |
| |
| // Check out of bounds condition on SetAttribute |
| TEST_F(InputStateTest, SetAttributeOutOfBounds) { |
| // Control case, setting last attribute |
| AssertWillBeSuccess(device.CreateInputStateBuilder()) |
| .SetInput(0, 0, dawn::InputStepMode::Vertex) |
| .SetAttribute(kMaxVertexAttributes - 1, 0, dawn::VertexFormat::FloatR32, 0) |
| .GetResult(); |
| |
| // Test OOB |
| AssertWillBeError(device.CreateInputStateBuilder()) |
| .SetInput(0, 0, dawn::InputStepMode::Vertex) |
| .SetAttribute(kMaxVertexAttributes, 0, dawn::VertexFormat::FloatR32, 0) |
| .GetResult(); |
| } |
| |
| // Check that all attributes must be backed by an input |
| TEST_F(InputStateTest, RequireInputForAttribute) { |
| // Control case |
| AssertWillBeSuccess(device.CreateInputStateBuilder()) |
| .SetInput(0, 0, dawn::InputStepMode::Vertex) |
| .SetAttribute(0, 0, dawn::VertexFormat::FloatR32, 0) |
| .GetResult(); |
| |
| // Attribute 0 uses input 1 which doesn't exist |
| AssertWillBeError(device.CreateInputStateBuilder()) |
| .SetInput(0, 0, dawn::InputStepMode::Vertex) |
| .SetAttribute(0, 1, dawn::VertexFormat::FloatR32, 0) |
| .GetResult(); |
| } |
| |
| // Check OOB checks for an attribute's input |
| TEST_F(InputStateTest, SetAttributeOOBCheckForInputs) { |
| // Control case |
| AssertWillBeSuccess(device.CreateInputStateBuilder()) |
| .SetInput(0, 0, dawn::InputStepMode::Vertex) |
| .SetAttribute(0, 0, dawn::VertexFormat::FloatR32, 0) |
| .GetResult(); |
| |
| // Could crash if we didn't check for OOB |
| AssertWillBeError(device.CreateInputStateBuilder()) |
| .SetInput(0, 0, dawn::InputStepMode::Vertex) |
| .SetAttribute(0, 1000000, dawn::VertexFormat::FloatR32, 0) |
| .GetResult(); |
| } |