src/tests/unittests/validation/CommandBufferValidationTests.cpp - dawn - Git at Google

 // Copyright 2017 The Dawn Authors
 //
 // Licensed under the Apache License, Version 2.0 (the "License");
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
 //     http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
 // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 // See the License for the specific language governing permissions and
 // limitations under the License.

 #include <gmock/gmock.h>

 #include "dawn_native/CommandEncoder.h"

 #include "tests/unittests/validation/ValidationTest.h"

 #include "utils/WGPUHelpers.h"

 using ::testing::HasSubstr;

 class CommandBufferValidationTest : public ValidationTest {};

 // Test for an empty command buffer
 TEST_F(CommandBufferValidationTest, Empty) {
     device.CreateCommandEncoder().Finish();
 }

 // Test that a command buffer cannot be ended mid render pass
 TEST_F(CommandBufferValidationTest, EndedMidRenderPass) {
     DummyRenderPass dummyRenderPass(device);

     // Control case, command buffer ended after the pass is ended.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
         pass.EndPass();
         encoder.Finish();
     }

     // Error case, command buffer ended mid-pass.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
         ASSERT_DEVICE_ERROR(
             encoder.Finish(),
             HasSubstr("Command buffer recording ended before [RenderPassEncoder] was ended."));
     }

     // Error case, command buffer ended mid-pass. Trying to use encoders after Finish
     // should fail too.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
         ASSERT_DEVICE_ERROR(
             encoder.Finish(),
             HasSubstr("Command buffer recording ended before [RenderPassEncoder] was ended."));
         ASSERT_DEVICE_ERROR(
             pass.EndPass(),
             HasSubstr("Recording in an error or already ended [RenderPassEncoder]."));
     }
 }

 // Test that a command buffer cannot be ended mid compute pass
 TEST_F(CommandBufferValidationTest, EndedMidComputePass) {
     // Control case, command buffer ended after the pass is ended.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
         pass.EndPass();
         encoder.Finish();
     }

     // Error case, command buffer ended mid-pass.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
         ASSERT_DEVICE_ERROR(
             encoder.Finish(),
             HasSubstr("Command buffer recording ended before [ComputePassEncoder] was ended."));
     }

     // Error case, command buffer ended mid-pass. Trying to use encoders after Finish
     // should fail too.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
         ASSERT_DEVICE_ERROR(
             encoder.Finish(),
             HasSubstr("Command buffer recording ended before [ComputePassEncoder] was ended."));
         ASSERT_DEVICE_ERROR(
             pass.EndPass(),
             HasSubstr("Recording in an error or already ended [ComputePassEncoder]."));
     }
 }

 // Test that a render pass cannot be ended twice
 TEST_F(CommandBufferValidationTest, RenderPassEndedTwice) {
     DummyRenderPass dummyRenderPass(device);

     // Control case, pass is ended once
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
         pass.EndPass();
         encoder.Finish();
     }

     // Error case, pass ended twice
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
         pass.EndPass();
         pass.EndPass();
         ASSERT_DEVICE_ERROR(
             encoder.Finish(),
             HasSubstr("Recording in an error or already ended [RenderPassEncoder]."));
     }
 }

 // Test that a compute pass cannot be ended twice
 TEST_F(CommandBufferValidationTest, ComputePassEndedTwice) {
     // Control case, pass is ended once.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
         pass.EndPass();
         encoder.Finish();
     }

     // Error case, pass ended twice
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
         pass.EndPass();
         pass.EndPass();
         ASSERT_DEVICE_ERROR(
             encoder.Finish(),
             HasSubstr("Recording in an error or already ended [ComputePassEncoder]."));
     }
 }

 // Test that beginning a compute pass before ending the previous pass causes an error.
 TEST_F(CommandBufferValidationTest, BeginComputePassBeforeEndPreviousPass) {
     DummyRenderPass dummyRenderPass(device);

     // Beginning a compute pass before ending a render pass causes an error.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::RenderPassEncoder renderPass = encoder.BeginRenderPass(&dummyRenderPass);
         wgpu::ComputePassEncoder computePass = encoder.BeginComputePass();
         computePass.EndPass();
         renderPass.EndPass();
         ASSERT_DEVICE_ERROR(encoder.Finish());
     }

     // Beginning a compute pass before ending a compute pass causes an error.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::ComputePassEncoder computePass1 = encoder.BeginComputePass();
         wgpu::ComputePassEncoder computePass2 = encoder.BeginComputePass();
         computePass2.EndPass();
         computePass1.EndPass();
         ASSERT_DEVICE_ERROR(encoder.Finish());
     }
 }

 // Test that beginning a render pass before ending the previous pass causes an error.
 TEST_F(CommandBufferValidationTest, BeginRenderPassBeforeEndPreviousPass) {
     DummyRenderPass dummyRenderPass(device);

     // Beginning a render pass before ending the render pass causes an error.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::RenderPassEncoder renderPass1 = encoder.BeginRenderPass(&dummyRenderPass);
         wgpu::RenderPassEncoder renderPass2 = encoder.BeginRenderPass(&dummyRenderPass);
         renderPass2.EndPass();
         renderPass1.EndPass();
         ASSERT_DEVICE_ERROR(encoder.Finish());
     }

     // Beginning a compute pass before ending a compute pass causes an error.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::ComputePassEncoder computePass = encoder.BeginComputePass();
         wgpu::RenderPassEncoder renderPass = encoder.BeginRenderPass(&dummyRenderPass);
         renderPass.EndPass();
         computePass.EndPass();
         ASSERT_DEVICE_ERROR(encoder.Finish());
     }
 }

 // Test that encoding command after a successful finish produces an error
 TEST_F(CommandBufferValidationTest, CallsAfterASuccessfulFinish) {
     // A buffer that can be used in CopyBufferToBuffer
     wgpu::BufferDescriptor copyBufferDesc;
     copyBufferDesc.size = 16;
     copyBufferDesc.usage = wgpu::BufferUsage::CopySrc | wgpu::BufferUsage::CopyDst;
     wgpu::Buffer copyBuffer = device.CreateBuffer(&copyBufferDesc);

     wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
     encoder.Finish();

     ASSERT_DEVICE_ERROR(encoder.CopyBufferToBuffer(copyBuffer, 0, copyBuffer, 0, 0));
 }

 // Test that encoding command after a failed finish produces an error
 TEST_F(CommandBufferValidationTest, CallsAfterAFailedFinish) {
     // A buffer that can be used in CopyBufferToBuffer
     wgpu::BufferDescriptor copyBufferDesc;
     copyBufferDesc.size = 16;
     copyBufferDesc.usage = wgpu::BufferUsage::CopySrc | wgpu::BufferUsage::CopyDst;
     wgpu::Buffer copyBuffer = device.CreateBuffer(&copyBufferDesc);

     // A buffer that can't be used in CopyBufferToBuffer
     wgpu::BufferDescriptor bufferDesc;
     bufferDesc.size = 16;
     bufferDesc.usage = wgpu::BufferUsage::Uniform;
     wgpu::Buffer buffer = device.CreateBuffer(&bufferDesc);

     wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
     encoder.CopyBufferToBuffer(buffer, 0, buffer, 0, 0);
     ASSERT_DEVICE_ERROR(encoder.Finish());

     ASSERT_DEVICE_ERROR(encoder.CopyBufferToBuffer(copyBuffer, 0, copyBuffer, 0, 0));
 }

 // Test that passes which are de-referenced prior to ending still allow the correct errors to be
 // produced.
 TEST_F(CommandBufferValidationTest, PassDereferenced) {
     DummyRenderPass dummyRenderPass(device);

     // Control case, command buffer ended after the pass is ended.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
         pass.EndPass();
         encoder.Finish();
     }

     // Error case, no reference is kept to a render pass.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         encoder.BeginRenderPass(&dummyRenderPass);
         ASSERT_DEVICE_ERROR(
             encoder.Finish(),
             HasSubstr("Command buffer recording ended before [RenderPassEncoder] was ended."));
     }

     // Error case, no reference is kept to a compute pass.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         encoder.BeginComputePass();
         ASSERT_DEVICE_ERROR(
             encoder.Finish(),
             HasSubstr("Command buffer recording ended before [ComputePassEncoder] was ended."));
     }

     // Error case, beginning a new pass after failing to end a de-referenced pass.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         encoder.BeginRenderPass(&dummyRenderPass);
         wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
         pass.EndPass();
         ASSERT_DEVICE_ERROR(
             encoder.Finish(),
             HasSubstr("Command buffer recording ended before [RenderPassEncoder] was ended."));
     }

     // Error case, deleting the pass after finishing the command encoder shouldn't generate an
     // uncaptured error.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
         ASSERT_DEVICE_ERROR(
             encoder.Finish(),
             HasSubstr("Command buffer recording ended before [ComputePassEncoder] was ended."));

         pass = nullptr;
     }

     // Valid case, command encoder is never finished so the de-referenced pass shouldn't
     // generate an uncaptured error.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         encoder.BeginComputePass();
     }
 }

 // Test that calling inject validation error produces an error.
 TEST_F(CommandBufferValidationTest, InjectValidationError) {
     wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
     encoder.InjectValidationError("my error");
     ASSERT_DEVICE_ERROR(encoder.Finish(), HasSubstr("my error"));
 }

 TEST_F(CommandBufferValidationTest, DestroyEncoder) {
     // Skip these tests if we are using wire because the destroy functionality is not exposed
     // and needs to use a cast to call manually. We cannot test this in the wire case since the
     // only way to trigger the destroy call is by losing all references which means we cannot
     // call finish.
     DAWN_SKIP_TEST_IF(UsesWire());
     DummyRenderPass dummyRenderPass(device);

     // Control case, command buffer ended after the pass is ended.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
         pass.EndPass();
         encoder.Finish();
     }

     // Destroyed encoder with encoded commands should emit error on finish.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
         pass.EndPass();
         dawn_native::FromAPI(encoder.Get())->Destroy();
         ASSERT_DEVICE_ERROR(encoder.Finish(), HasSubstr("Destroyed encoder cannot be finished."));
     }

     // Destroyed encoder with encoded commands shouldn't emit an error if never finished.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
         pass.EndPass();
         dawn_native::FromAPI(encoder.Get())->Destroy();
     }

     // Destroyed encoder should allow encoding, and emit error on finish.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         dawn_native::FromAPI(encoder.Get())->Destroy();
         wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
         pass.EndPass();
         ASSERT_DEVICE_ERROR(encoder.Finish(), HasSubstr("Destroyed encoder cannot be finished."));
     }

     // Destroyed encoder should allow encoding and shouldn't emit an error if never finished.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         dawn_native::FromAPI(encoder.Get())->Destroy();
         wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
         pass.EndPass();
     }

     // Destroying a finished encoder should not emit any errors.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
         pass.EndPass();
         encoder.Finish();
         dawn_native::FromAPI(encoder.Get())->Destroy();
     }

     // Destroying an encoder twice should not emit any errors.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         dawn_native::FromAPI(encoder.Get())->Destroy();
         dawn_native::FromAPI(encoder.Get())->Destroy();
     }

     // Destroying an encoder twice and then calling finish should fail.
     {
         wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
         dawn_native::FromAPI(encoder.Get())->Destroy();
         dawn_native::FromAPI(encoder.Get())->Destroy();
         ASSERT_DEVICE_ERROR(encoder.Finish(), HasSubstr("Destroyed encoder cannot be finished."));
     }
 }
	// Copyright 2017 The Dawn Authors
	//
	// Licensed under the Apache License, Version 2.0 (the "License");
	// you may not use this file except in compliance with the License.
	// You may obtain a copy of the License at
	//
	// http://www.apache.org/licenses/LICENSE-2.0
	//
	// Unless required by applicable law or agreed to in writing, software
	// distributed under the License is distributed on an "AS IS" BASIS,
	// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	// See the License for the specific language governing permissions and
	// limitations under the License.

	#include <gmock/gmock.h>

	#include "dawn_native/CommandEncoder.h"

	#include "tests/unittests/validation/ValidationTest.h"

	#include "utils/WGPUHelpers.h"

	using ::testing::HasSubstr;

	class CommandBufferValidationTest : public ValidationTest {};

	// Test for an empty command buffer
	TEST_F(CommandBufferValidationTest, Empty) {
	device.CreateCommandEncoder().Finish();
	}

	// Test that a command buffer cannot be ended mid render pass
	TEST_F(CommandBufferValidationTest, EndedMidRenderPass) {
	DummyRenderPass dummyRenderPass(device);

	// Control case, command buffer ended after the pass is ended.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
	pass.EndPass();
	encoder.Finish();
	}

	// Error case, command buffer ended mid-pass.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
	ASSERT_DEVICE_ERROR(
	encoder.Finish(),
	HasSubstr("Command buffer recording ended before [RenderPassEncoder] was ended."));
	}

	// Error case, command buffer ended mid-pass. Trying to use encoders after Finish
	// should fail too.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
	ASSERT_DEVICE_ERROR(
	encoder.Finish(),
	HasSubstr("Command buffer recording ended before [RenderPassEncoder] was ended."));
	ASSERT_DEVICE_ERROR(
	pass.EndPass(),
	HasSubstr("Recording in an error or already ended [RenderPassEncoder]."));
	}
	}

	// Test that a command buffer cannot be ended mid compute pass
	TEST_F(CommandBufferValidationTest, EndedMidComputePass) {
	// Control case, command buffer ended after the pass is ended.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
	pass.EndPass();
	encoder.Finish();
	}

	// Error case, command buffer ended mid-pass.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
	ASSERT_DEVICE_ERROR(
	encoder.Finish(),
	HasSubstr("Command buffer recording ended before [ComputePassEncoder] was ended."));
	}

	// Error case, command buffer ended mid-pass. Trying to use encoders after Finish
	// should fail too.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
	ASSERT_DEVICE_ERROR(
	encoder.Finish(),
	HasSubstr("Command buffer recording ended before [ComputePassEncoder] was ended."));
	ASSERT_DEVICE_ERROR(
	pass.EndPass(),
	HasSubstr("Recording in an error or already ended [ComputePassEncoder]."));
	}
	}

	// Test that a render pass cannot be ended twice
	TEST_F(CommandBufferValidationTest, RenderPassEndedTwice) {
	DummyRenderPass dummyRenderPass(device);

	// Control case, pass is ended once
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
	pass.EndPass();
	encoder.Finish();
	}

	// Error case, pass ended twice
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
	pass.EndPass();
	pass.EndPass();
	ASSERT_DEVICE_ERROR(
	encoder.Finish(),
	HasSubstr("Recording in an error or already ended [RenderPassEncoder]."));
	}
	}

	// Test that a compute pass cannot be ended twice
	TEST_F(CommandBufferValidationTest, ComputePassEndedTwice) {
	// Control case, pass is ended once.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
	pass.EndPass();
	encoder.Finish();
	}

	// Error case, pass ended twice
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
	pass.EndPass();
	pass.EndPass();
	ASSERT_DEVICE_ERROR(
	encoder.Finish(),
	HasSubstr("Recording in an error or already ended [ComputePassEncoder]."));
	}
	}

	// Test that beginning a compute pass before ending the previous pass causes an error.
	TEST_F(CommandBufferValidationTest, BeginComputePassBeforeEndPreviousPass) {
	DummyRenderPass dummyRenderPass(device);

	// Beginning a compute pass before ending a render pass causes an error.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::RenderPassEncoder renderPass = encoder.BeginRenderPass(&dummyRenderPass);
	wgpu::ComputePassEncoder computePass = encoder.BeginComputePass();
	computePass.EndPass();
	renderPass.EndPass();
	ASSERT_DEVICE_ERROR(encoder.Finish());
	}

	// Beginning a compute pass before ending a compute pass causes an error.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::ComputePassEncoder computePass1 = encoder.BeginComputePass();
	wgpu::ComputePassEncoder computePass2 = encoder.BeginComputePass();
	computePass2.EndPass();
	computePass1.EndPass();
	ASSERT_DEVICE_ERROR(encoder.Finish());
	}
	}

	// Test that beginning a render pass before ending the previous pass causes an error.
	TEST_F(CommandBufferValidationTest, BeginRenderPassBeforeEndPreviousPass) {
	DummyRenderPass dummyRenderPass(device);

	// Beginning a render pass before ending the render pass causes an error.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::RenderPassEncoder renderPass1 = encoder.BeginRenderPass(&dummyRenderPass);
	wgpu::RenderPassEncoder renderPass2 = encoder.BeginRenderPass(&dummyRenderPass);
	renderPass2.EndPass();
	renderPass1.EndPass();
	ASSERT_DEVICE_ERROR(encoder.Finish());
	}

	// Beginning a compute pass before ending a compute pass causes an error.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::ComputePassEncoder computePass = encoder.BeginComputePass();
	wgpu::RenderPassEncoder renderPass = encoder.BeginRenderPass(&dummyRenderPass);
	renderPass.EndPass();
	computePass.EndPass();
	ASSERT_DEVICE_ERROR(encoder.Finish());
	}
	}

	// Test that encoding command after a successful finish produces an error
	TEST_F(CommandBufferValidationTest, CallsAfterASuccessfulFinish) {
	// A buffer that can be used in CopyBufferToBuffer
	wgpu::BufferDescriptor copyBufferDesc;
	copyBufferDesc.size = 16;
	copyBufferDesc.usage = wgpu::BufferUsage::CopySrc \| wgpu::BufferUsage::CopyDst;
	wgpu::Buffer copyBuffer = device.CreateBuffer(&copyBufferDesc);

	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	encoder.Finish();

	ASSERT_DEVICE_ERROR(encoder.CopyBufferToBuffer(copyBuffer, 0, copyBuffer, 0, 0));
	}

	// Test that encoding command after a failed finish produces an error
	TEST_F(CommandBufferValidationTest, CallsAfterAFailedFinish) {
	// A buffer that can be used in CopyBufferToBuffer
	wgpu::BufferDescriptor copyBufferDesc;
	copyBufferDesc.size = 16;
	copyBufferDesc.usage = wgpu::BufferUsage::CopySrc \| wgpu::BufferUsage::CopyDst;
	wgpu::Buffer copyBuffer = device.CreateBuffer(&copyBufferDesc);

	// A buffer that can't be used in CopyBufferToBuffer
	wgpu::BufferDescriptor bufferDesc;
	bufferDesc.size = 16;
	bufferDesc.usage = wgpu::BufferUsage::Uniform;
	wgpu::Buffer buffer = device.CreateBuffer(&bufferDesc);

	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	encoder.CopyBufferToBuffer(buffer, 0, buffer, 0, 0);
	ASSERT_DEVICE_ERROR(encoder.Finish());

	ASSERT_DEVICE_ERROR(encoder.CopyBufferToBuffer(copyBuffer, 0, copyBuffer, 0, 0));
	}

	// Test that passes which are de-referenced prior to ending still allow the correct errors to be
	// produced.
	TEST_F(CommandBufferValidationTest, PassDereferenced) {
	DummyRenderPass dummyRenderPass(device);

	// Control case, command buffer ended after the pass is ended.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
	pass.EndPass();
	encoder.Finish();
	}

	// Error case, no reference is kept to a render pass.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	encoder.BeginRenderPass(&dummyRenderPass);
	ASSERT_DEVICE_ERROR(
	encoder.Finish(),
	HasSubstr("Command buffer recording ended before [RenderPassEncoder] was ended."));
	}

	// Error case, no reference is kept to a compute pass.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	encoder.BeginComputePass();
	ASSERT_DEVICE_ERROR(
	encoder.Finish(),
	HasSubstr("Command buffer recording ended before [ComputePassEncoder] was ended."));
	}

	// Error case, beginning a new pass after failing to end a de-referenced pass.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	encoder.BeginRenderPass(&dummyRenderPass);
	wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
	pass.EndPass();
	ASSERT_DEVICE_ERROR(
	encoder.Finish(),
	HasSubstr("Command buffer recording ended before [RenderPassEncoder] was ended."));
	}

	// Error case, deleting the pass after finishing the command encoder shouldn't generate an
	// uncaptured error.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
	ASSERT_DEVICE_ERROR(
	encoder.Finish(),
	HasSubstr("Command buffer recording ended before [ComputePassEncoder] was ended."));

	pass = nullptr;
	}

	// Valid case, command encoder is never finished so the de-referenced pass shouldn't
	// generate an uncaptured error.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	encoder.BeginComputePass();
	}
	}

	// Test that calling inject validation error produces an error.
	TEST_F(CommandBufferValidationTest, InjectValidationError) {
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	encoder.InjectValidationError("my error");
	ASSERT_DEVICE_ERROR(encoder.Finish(), HasSubstr("my error"));
	}

	TEST_F(CommandBufferValidationTest, DestroyEncoder) {
	// Skip these tests if we are using wire because the destroy functionality is not exposed
	// and needs to use a cast to call manually. We cannot test this in the wire case since the
	// only way to trigger the destroy call is by losing all references which means we cannot
	// call finish.
	DAWN_SKIP_TEST_IF(UsesWire());
	DummyRenderPass dummyRenderPass(device);

	// Control case, command buffer ended after the pass is ended.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
	pass.EndPass();
	encoder.Finish();
	}

	// Destroyed encoder with encoded commands should emit error on finish.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
	pass.EndPass();
	dawn_native::FromAPI(encoder.Get())->Destroy();
	ASSERT_DEVICE_ERROR(encoder.Finish(), HasSubstr("Destroyed encoder cannot be finished."));
	}

	// Destroyed encoder with encoded commands shouldn't emit an error if never finished.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
	pass.EndPass();
	dawn_native::FromAPI(encoder.Get())->Destroy();
	}

	// Destroyed encoder should allow encoding, and emit error on finish.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	dawn_native::FromAPI(encoder.Get())->Destroy();
	wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
	pass.EndPass();
	ASSERT_DEVICE_ERROR(encoder.Finish(), HasSubstr("Destroyed encoder cannot be finished."));
	}

	// Destroyed encoder should allow encoding and shouldn't emit an error if never finished.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	dawn_native::FromAPI(encoder.Get())->Destroy();
	wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
	pass.EndPass();
	}

	// Destroying a finished encoder should not emit any errors.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&dummyRenderPass);
	pass.EndPass();
	encoder.Finish();
	dawn_native::FromAPI(encoder.Get())->Destroy();
	}

	// Destroying an encoder twice should not emit any errors.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	dawn_native::FromAPI(encoder.Get())->Destroy();
	dawn_native::FromAPI(encoder.Get())->Destroy();
	}

	// Destroying an encoder twice and then calling finish should fail.
	{
	wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
	dawn_native::FromAPI(encoder.Get())->Destroy();
	dawn_native::FromAPI(encoder.Get())->Destroy();
	ASSERT_DEVICE_ERROR(encoder.Finish(), HasSubstr("Destroyed encoder cannot be finished."));
	}
	}