blob: e6ad3c5bbbab842180772d74dad9da7ae607e0db [file] [log] [blame] [edit]
// Copyright 2017 The Dawn Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef DAWNNATIVE_COMMAND_ALLOCATOR_H_
#define DAWNNATIVE_COMMAND_ALLOCATOR_H_
#include "common/Assert.h"
#include "common/Math.h"
#include "common/NonCopyable.h"
#include <cstddef>
#include <cstdint>
#include <vector>
namespace dawn::native {
// Allocation for command buffers should be fast. To avoid doing an allocation per command
// or to avoid copying commands when reallocing, we use a linear allocator in a growing set
// of large memory blocks. We also use this to have the format to be (u32 commandId, command),
// so that iteration over the commands is easy.
// Usage of the allocator and iterator:
// CommandAllocator allocator;
// DrawCommand* cmd = allocator.Allocate<DrawCommand>(CommandType::Draw);
// // Fill command
// // Repeat allocation and filling commands
//
// CommandIterator commands(allocator);
// CommandType type;
// while(commands.NextCommandId(&type)) {
// switch(type) {
// case CommandType::Draw:
// DrawCommand* draw = commands.NextCommand<DrawCommand>();
// // Do the draw
// break;
// // other cases
// }
// }
// Note that you need to extract the commands from the CommandAllocator before destroying it
// and must tell the CommandIterator when the allocated commands have been processed for
// deletion.
// These are the lists of blocks, should not be used directly, only through CommandAllocator
// and CommandIterator
struct BlockDef {
size_t size;
uint8_t* block;
};
using CommandBlocks = std::vector<BlockDef>;
namespace detail {
constexpr uint32_t kEndOfBlock = std::numeric_limits<uint32_t>::max();
constexpr uint32_t kAdditionalData = std::numeric_limits<uint32_t>::max() - 1;
} // namespace detail
class CommandAllocator;
class CommandIterator : public NonCopyable {
public:
CommandIterator();
~CommandIterator();
CommandIterator(CommandIterator&& other);
CommandIterator& operator=(CommandIterator&& other);
// Shorthand constructor for acquiring CommandBlocks from a single CommandAllocator.
explicit CommandIterator(CommandAllocator allocator);
void AcquireCommandBlocks(std::vector<CommandAllocator> allocators);
template <typename E>
bool NextCommandId(E* commandId) {
return NextCommandId(reinterpret_cast<uint32_t*>(commandId));
}
template <typename T>
T* NextCommand() {
return static_cast<T*>(NextCommand(sizeof(T), alignof(T)));
}
template <typename T>
T* NextData(size_t count) {
return static_cast<T*>(NextData(sizeof(T) * count, alignof(T)));
}
// Sets iterator to the beginning of the commands without emptying the list. This method can
// be used if iteration was stopped early and the iterator needs to be restarted.
void Reset();
// This method must to be called after commands have been deleted. This indicates that the
// commands have been submitted and they are no longer valid.
void MakeEmptyAsDataWasDestroyed();
private:
bool IsEmpty() const;
DAWN_FORCE_INLINE bool NextCommandId(uint32_t* commandId) {
uint8_t* idPtr = AlignPtr(mCurrentPtr, alignof(uint32_t));
ASSERT(idPtr + sizeof(uint32_t) <=
mBlocks[mCurrentBlock].block + mBlocks[mCurrentBlock].size);
uint32_t id = *reinterpret_cast<uint32_t*>(idPtr);
if (id != detail::kEndOfBlock) {
mCurrentPtr = idPtr + sizeof(uint32_t);
*commandId = id;
return true;
}
return NextCommandIdInNewBlock(commandId);
}
bool NextCommandIdInNewBlock(uint32_t* commandId);
DAWN_FORCE_INLINE void* NextCommand(size_t commandSize, size_t commandAlignment) {
uint8_t* commandPtr = AlignPtr(mCurrentPtr, commandAlignment);
ASSERT(commandPtr + sizeof(commandSize) <=
mBlocks[mCurrentBlock].block + mBlocks[mCurrentBlock].size);
mCurrentPtr = commandPtr + commandSize;
return commandPtr;
}
DAWN_FORCE_INLINE void* NextData(size_t dataSize, size_t dataAlignment) {
uint32_t id;
bool hasId = NextCommandId(&id);
ASSERT(hasId);
ASSERT(id == detail::kAdditionalData);
return NextCommand(dataSize, dataAlignment);
}
CommandBlocks mBlocks;
uint8_t* mCurrentPtr = nullptr;
size_t mCurrentBlock = 0;
// Used to avoid a special case for empty iterators.
uint32_t mEndOfBlock = detail::kEndOfBlock;
};
class CommandAllocator : public NonCopyable {
public:
CommandAllocator();
~CommandAllocator();
// NOTE: A moved-from CommandAllocator is reset to its initial empty state.
CommandAllocator(CommandAllocator&&);
CommandAllocator& operator=(CommandAllocator&&);
// Frees all blocks held by the allocator and restores it to its initial empty state.
void Reset();
bool IsEmpty() const;
template <typename T, typename E>
T* Allocate(E commandId) {
static_assert(sizeof(E) == sizeof(uint32_t), "");
static_assert(alignof(E) == alignof(uint32_t), "");
static_assert(alignof(T) <= kMaxSupportedAlignment, "");
T* result = reinterpret_cast<T*>(
Allocate(static_cast<uint32_t>(commandId), sizeof(T), alignof(T)));
if (!result) {
return nullptr;
}
new (result) T;
return result;
}
template <typename T>
T* AllocateData(size_t count) {
static_assert(alignof(T) <= kMaxSupportedAlignment, "");
T* result = reinterpret_cast<T*>(AllocateData(sizeof(T) * count, alignof(T)));
if (!result) {
return nullptr;
}
for (size_t i = 0; i < count; i++) {
new (result + i) T;
}
return result;
}
private:
// This is used for some internal computations and can be any power of two as long as code
// using the CommandAllocator passes the static_asserts.
static constexpr size_t kMaxSupportedAlignment = 8;
// To avoid checking for overflows at every step of the computations we compute an upper
// bound of the space that will be needed in addition to the command data.
static constexpr size_t kWorstCaseAdditionalSize =
sizeof(uint32_t) + kMaxSupportedAlignment + alignof(uint32_t) + sizeof(uint32_t);
// The default value of mLastAllocationSize.
static constexpr size_t kDefaultBaseAllocationSize = 2048;
friend CommandIterator;
CommandBlocks&& AcquireBlocks();
DAWN_FORCE_INLINE uint8_t* Allocate(uint32_t commandId,
size_t commandSize,
size_t commandAlignment) {
ASSERT(mCurrentPtr != nullptr);
ASSERT(mEndPtr != nullptr);
ASSERT(commandId != detail::kEndOfBlock);
// It should always be possible to allocate one id, for kEndOfBlock tagging,
ASSERT(IsPtrAligned(mCurrentPtr, alignof(uint32_t)));
ASSERT(mEndPtr >= mCurrentPtr);
ASSERT(static_cast<size_t>(mEndPtr - mCurrentPtr) >= sizeof(uint32_t));
// The memory after the ID will contain the following:
// - the current ID
// - padding to align the command, maximum kMaxSupportedAlignment
// - the command of size commandSize
// - padding to align the next ID, maximum alignof(uint32_t)
// - the next ID of size sizeof(uint32_t)
// This can't overflow because by construction mCurrentPtr always has space for the next
// ID.
size_t remainingSize = static_cast<size_t>(mEndPtr - mCurrentPtr);
// The good case were we have enough space for the command data and upper bound of the
// extra required space.
if ((remainingSize >= kWorstCaseAdditionalSize) &&
(remainingSize - kWorstCaseAdditionalSize >= commandSize)) {
uint32_t* idAlloc = reinterpret_cast<uint32_t*>(mCurrentPtr);
*idAlloc = commandId;
uint8_t* commandAlloc = AlignPtr(mCurrentPtr + sizeof(uint32_t), commandAlignment);
mCurrentPtr = AlignPtr(commandAlloc + commandSize, alignof(uint32_t));
return commandAlloc;
}
return AllocateInNewBlock(commandId, commandSize, commandAlignment);
}
uint8_t* AllocateInNewBlock(uint32_t commandId,
size_t commandSize,
size_t commandAlignment);
DAWN_FORCE_INLINE uint8_t* AllocateData(size_t commandSize, size_t commandAlignment) {
return Allocate(detail::kAdditionalData, commandSize, commandAlignment);
}
bool GetNewBlock(size_t minimumSize);
void ResetPointers();
CommandBlocks mBlocks;
size_t mLastAllocationSize = kDefaultBaseAllocationSize;
// Data used for the block range at initialization so that the first call to Allocate sees
// there is not enough space and calls GetNewBlock. This avoids having to special case the
// initialization in Allocate.
uint32_t mDummyEnum[1] = {0};
// Pointers to the current range of allocation in the block. Guaranteed to allow for at
// least one uint32_t if not nullptr, so that the special kEndOfBlock command id can always
// be written. Nullptr iff the blocks were moved out.
uint8_t* mCurrentPtr = nullptr;
uint8_t* mEndPtr = nullptr;
};
} // namespace dawn::native
#endif // DAWNNATIVE_COMMAND_ALLOCATOR_H_