| // Copyright 2020 The Dawn Authors |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "tests/DawnTest.h" |
| |
| #include <array> |
| #include "common/Constants.h" |
| #include "common/Math.h" |
| #include "utils/ComboRenderPipelineDescriptor.h" |
| #include "utils/TestUtils.h" |
| #include "utils/TextureUtils.h" |
| #include "utils/WGPUHelpers.h" |
| |
| namespace { |
| using TextureFormat = wgpu::TextureFormat; |
| DAWN_TEST_PARAM_STRUCT(DepthStencilCopyTestParams, TextureFormat); |
| |
| constexpr std::array<wgpu::TextureFormat, 3> kValidDepthCopyTextureFormats = { |
| wgpu::TextureFormat::Depth16Unorm, |
| wgpu::TextureFormat::Depth32Float, |
| wgpu::TextureFormat::Depth32FloatStencil8, |
| }; |
| } // namespace |
| |
| class DepthStencilCopyTests : public DawnTestWithParams<DepthStencilCopyTestParams> { |
| protected: |
| void SetUp() override { |
| DawnTestWithParams<DepthStencilCopyTestParams>::SetUp(); |
| |
| DAWN_TEST_UNSUPPORTED_IF(!mIsFormatSupported); |
| |
| // Draw a square in the bottom left quarter of the screen. |
| mVertexModule = utils::CreateShaderModule(device, R"( |
| [[stage(vertex)]] |
| fn main([[builtin(vertex_index)]] VertexIndex : u32) -> [[builtin(position)]] vec4<f32> { |
| var pos = array<vec2<f32>, 6>( |
| vec2<f32>(-1.0, -1.0), |
| vec2<f32>( 0.0, -1.0), |
| vec2<f32>(-1.0, 0.0), |
| vec2<f32>(-1.0, 0.0), |
| vec2<f32>( 0.0, -1.0), |
| vec2<f32>( 0.0, 0.0)); |
| return vec4<f32>(pos[VertexIndex], 0.0, 1.0); |
| })"); |
| } |
| |
| std::vector<wgpu::FeatureName> GetRequiredFeatures() override { |
| switch (GetParam().mTextureFormat) { |
| case wgpu::TextureFormat::Depth24UnormStencil8: |
| if (SupportsFeatures({wgpu::FeatureName::Depth24UnormStencil8})) { |
| mIsFormatSupported = true; |
| return {wgpu::FeatureName::Depth24UnormStencil8}; |
| } |
| return {}; |
| case wgpu::TextureFormat::Depth32FloatStencil8: |
| if (SupportsFeatures({wgpu::FeatureName::Depth32FloatStencil8})) { |
| mIsFormatSupported = true; |
| return {wgpu::FeatureName::Depth32FloatStencil8}; |
| } |
| return {}; |
| default: |
| mIsFormatSupported = true; |
| return {}; |
| } |
| } |
| |
| bool IsValidDepthCopyTextureFormat() { |
| switch (GetParam().mTextureFormat) { |
| case wgpu::TextureFormat::Depth16Unorm: |
| case wgpu::TextureFormat::Depth32Float: |
| case wgpu::TextureFormat::Depth32FloatStencil8: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| wgpu::Texture CreateTexture(uint32_t width, |
| uint32_t height, |
| wgpu::TextureUsage usage, |
| uint32_t mipLevelCount = 1) { |
| wgpu::TextureDescriptor texDescriptor = {}; |
| texDescriptor.size = {width, height, 1}; |
| texDescriptor.format = GetParam().mTextureFormat; |
| texDescriptor.usage = usage; |
| texDescriptor.mipLevelCount = mipLevelCount; |
| return device.CreateTexture(&texDescriptor); |
| } |
| |
| wgpu::Texture CreateDepthStencilTexture(uint32_t width, |
| uint32_t height, |
| wgpu::TextureUsage usage, |
| uint32_t mipLevelCount = 1) { |
| wgpu::TextureDescriptor texDescriptor = {}; |
| texDescriptor.size = {width, height, 1}; |
| texDescriptor.format = GetParam().mTextureFormat; |
| texDescriptor.usage = usage; |
| texDescriptor.mipLevelCount = mipLevelCount; |
| return device.CreateTexture(&texDescriptor); |
| } |
| |
| wgpu::Texture CreateDepthTexture(uint32_t width, |
| uint32_t height, |
| wgpu::TextureUsage usage, |
| uint32_t mipLevelCount = 1) { |
| wgpu::TextureDescriptor texDescriptor = {}; |
| texDescriptor.size = {width, height, 1}; |
| texDescriptor.format = GetParam().mTextureFormat; |
| texDescriptor.usage = usage; |
| texDescriptor.mipLevelCount = mipLevelCount; |
| return device.CreateTexture(&texDescriptor); |
| } |
| |
| void PopulatePipelineDescriptorWriteDepth(utils::ComboRenderPipelineDescriptor* desc, |
| wgpu::TextureFormat format, |
| float regionDepth) { |
| desc->vertex.module = mVertexModule; |
| |
| std::string fsSource = R"( |
| [[stage(fragment)]] fn main() -> [[builtin(frag_depth)]] f32 { |
| return )" + std::to_string(regionDepth) + |
| ";\n}"; |
| |
| desc->cFragment.module = utils::CreateShaderModule(device, fsSource.c_str()); |
| wgpu::DepthStencilState* depthStencil = desc->EnableDepthStencil(format); |
| depthStencil->depthWriteEnabled = true; |
| desc->cFragment.targetCount = 0; |
| } |
| |
| // Initialize the depth/stencil values for the texture using a render pass. |
| // The texture will be cleared to the "clear" value, and then bottom left corner will |
| // be written with the "region" value. |
| void InitializeDepthTextureRegion(wgpu::Texture texture, |
| float clearDepth, |
| float regionDepth, |
| uint32_t mipLevel = 0) { |
| wgpu::TextureViewDescriptor viewDesc = {}; |
| viewDesc.baseMipLevel = mipLevel; |
| viewDesc.mipLevelCount = 1; |
| |
| utils::ComboRenderPassDescriptor renderPassDesc({}, texture.CreateView(&viewDesc)); |
| renderPassDesc.cDepthStencilAttachmentInfo.clearDepth = clearDepth; |
| |
| utils::ComboRenderPipelineDescriptor renderPipelineDesc; |
| PopulatePipelineDescriptorWriteDepth(&renderPipelineDesc, GetParam().mTextureFormat, |
| regionDepth); |
| |
| wgpu::RenderPipeline pipeline = device.CreateRenderPipeline(&renderPipelineDesc); |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::RenderPassEncoder pass = commandEncoder.BeginRenderPass(&renderPassDesc); |
| pass.SetPipeline(pipeline); |
| pass.Draw(6); |
| pass.EndPass(); |
| |
| wgpu::CommandBuffer commands = commandEncoder.Finish(); |
| queue.Submit(1, &commands); |
| } |
| |
| // Initialize the depth/stencil values for the texture using a render pass. |
| // The texture will be cleared to the "clear" values, and then bottom left corner will |
| // be written with the "region" values. |
| void InitializeDepthStencilTextureRegion(wgpu::Texture texture, |
| float clearDepth, |
| float regionDepth, |
| uint8_t clearStencil, |
| uint8_t regionStencil, |
| uint32_t mipLevel = 0) { |
| wgpu::TextureViewDescriptor viewDesc = {}; |
| viewDesc.baseMipLevel = mipLevel; |
| viewDesc.mipLevelCount = 1; |
| |
| utils::ComboRenderPassDescriptor renderPassDesc({}, texture.CreateView(&viewDesc)); |
| renderPassDesc.cDepthStencilAttachmentInfo.clearDepth = clearDepth; |
| renderPassDesc.cDepthStencilAttachmentInfo.clearStencil = clearStencil; |
| |
| utils::ComboRenderPipelineDescriptor renderPipelineDesc; |
| PopulatePipelineDescriptorWriteDepth(&renderPipelineDesc, GetParam().mTextureFormat, |
| regionDepth); |
| renderPipelineDesc.cDepthStencil.stencilFront.passOp = wgpu::StencilOperation::Replace; |
| |
| wgpu::RenderPipeline pipeline = device.CreateRenderPipeline(&renderPipelineDesc); |
| |
| // Draw the quad (two triangles) |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::RenderPassEncoder pass = commandEncoder.BeginRenderPass(&renderPassDesc); |
| pass.SetPipeline(pipeline); |
| pass.SetStencilReference(regionStencil); |
| pass.Draw(6); |
| pass.EndPass(); |
| |
| wgpu::CommandBuffer commands = commandEncoder.Finish(); |
| queue.Submit(1, &commands); |
| } |
| |
| wgpu::Texture CreateInitializeDepthStencilTextureAndCopyT2T(float clearDepth, |
| float regionDepth, |
| uint8_t clearStencil, |
| uint8_t regionStencil, |
| uint32_t width, |
| uint32_t height, |
| wgpu::TextureUsage usage, |
| uint32_t mipLevel = 0) { |
| wgpu::Texture src = CreateDepthStencilTexture( |
| width, height, wgpu::TextureUsage::RenderAttachment | wgpu::TextureUsage::CopySrc, |
| mipLevel + 1); |
| |
| wgpu::Texture dst = CreateDepthStencilTexture( |
| width, height, usage | wgpu::TextureUsage::CopyDst, mipLevel + 1); |
| |
| InitializeDepthStencilTextureRegion(src, clearDepth, regionDepth, clearStencil, |
| regionStencil, mipLevel); |
| |
| // Perform a T2T copy of all aspects |
| { |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::ImageCopyTexture srcView = |
| utils::CreateImageCopyTexture(src, mipLevel, {0, 0, 0}); |
| wgpu::ImageCopyTexture dstView = |
| utils::CreateImageCopyTexture(dst, mipLevel, {0, 0, 0}); |
| wgpu::Extent3D copySize = {width >> mipLevel, height >> mipLevel, 1}; |
| commandEncoder.CopyTextureToTexture(&srcView, &dstView, ©Size); |
| |
| wgpu::CommandBuffer commands = commandEncoder.Finish(); |
| queue.Submit(1, &commands); |
| } |
| |
| return dst; |
| } |
| |
| wgpu::ShaderModule mVertexModule; |
| |
| private: |
| bool mIsFormatSupported = false; |
| }; |
| |
| // Test copying both aspects in a T2T copy, then copying only stencil. |
| TEST_P(DepthStencilCopyTests, T2TBothAspectsThenCopyStencil) { |
| // TODO(crbug.com/dawn/704): Readback after clear via stencil copy does not work |
| // on some Intel drivers. |
| // Maybe has to do with the RenderAttachment usage. Notably, a later test |
| // T2TBothAspectsThenCopyNonRenderableStencil does not use RenderAttachment and works correctly. |
| DAWN_SUPPRESS_TEST_IF(IsMetal() && IsIntel()); |
| |
| // TODO(crbug.com/dawn/667): Work around some platforms' inability to read back stencil. |
| DAWN_TEST_UNSUPPORTED_IF(HasToggleEnabled("disable_depth_stencil_read")); |
| |
| constexpr uint32_t kWidth = 4; |
| constexpr uint32_t kHeight = 4; |
| |
| wgpu::Texture texture = CreateInitializeDepthStencilTextureAndCopyT2T( |
| 0.1f, 0.3f, 1u, 3u, kWidth, kHeight, |
| wgpu::TextureUsage::CopySrc | wgpu::TextureUsage::RenderAttachment); |
| |
| // Check the stencil |
| std::vector<uint8_t> expectedData = { |
| 1u, 1u, 1u, 1u, // |
| 1u, 1u, 1u, 1u, // |
| 3u, 3u, 1u, 1u, // |
| 3u, 3u, 1u, 1u, // |
| }; |
| EXPECT_TEXTURE_EQ(expectedData.data(), texture, {0, 0}, {kWidth, kHeight}, 0, |
| wgpu::TextureAspect::StencilOnly); |
| } |
| |
| // Test that part of a non-renderable stencil aspect can be copied. Notably, |
| // this test has different behavior on some platforms than T2TBothAspectsThenCopyStencil. |
| TEST_P(DepthStencilCopyTests, T2TBothAspectsThenCopyNonRenderableStencil) { |
| // TODO(crbug.com/dawn/667): Work around some platforms' inability to read back stencil. |
| DAWN_TEST_UNSUPPORTED_IF(HasToggleEnabled("disable_depth_stencil_read")); |
| |
| constexpr uint32_t kWidth = 4; |
| constexpr uint32_t kHeight = 4; |
| |
| wgpu::Texture texture = CreateInitializeDepthStencilTextureAndCopyT2T( |
| 0.1f, 0.3f, 1u, 3u, kWidth, kHeight, wgpu::TextureUsage::CopySrc); |
| |
| // Check the stencil |
| std::vector<uint8_t> expectedData = { |
| 1u, 1u, 1u, 1u, // |
| 1u, 1u, 1u, 1u, // |
| 3u, 3u, 1u, 1u, // |
| 3u, 3u, 1u, 1u, // |
| }; |
| EXPECT_TEXTURE_EQ(expectedData.data(), texture, {0, 0}, {kWidth, kHeight}, 0, |
| wgpu::TextureAspect::StencilOnly); |
| } |
| |
| // Test that part of a non-renderable, non-zero mip stencil aspect can be copied. Notably, |
| // this test has different behavior on some platforms than T2TBothAspectsThenCopyStencil. |
| TEST_P(DepthStencilCopyTests, T2TBothAspectsThenCopyNonRenderableNonZeroMipStencil) { |
| /// TODO(crbug.com/dawn/704): Readback after clear via stencil copy does not work |
| // on some Intel drivers. |
| // Maybe has to do with the non-zero mip. Notably, a previous test |
| // T2TBothAspectsThenCopyNonRenderableStencil works correctly. |
| DAWN_SUPPRESS_TEST_IF(IsMetal() && IsIntel()); |
| |
| // TODO(crbug.com/dawn/667): Work around some platforms' inability to read back stencil. |
| DAWN_TEST_UNSUPPORTED_IF(HasToggleEnabled("disable_depth_stencil_read")); |
| |
| wgpu::Texture texture = CreateInitializeDepthStencilTextureAndCopyT2T( |
| 0.1f, 0.3f, 1u, 3u, 9, 9, wgpu::TextureUsage::CopySrc, 1); |
| |
| // Check the stencil |
| std::vector<uint8_t> expectedData = { |
| 1u, 1u, 1u, 1u, // |
| 1u, 1u, 1u, 1u, // |
| 3u, 3u, 1u, 1u, // |
| 3u, 3u, 1u, 1u, // |
| }; |
| EXPECT_TEXTURE_EQ(expectedData.data(), texture, {0, 0}, {4, 4}, 1, |
| wgpu::TextureAspect::StencilOnly); |
| } |
| |
| // Test copying both aspects in a T2T copy, then copying only depth. |
| TEST_P(DepthStencilCopyTests, T2TBothAspectsThenCopyDepth) { |
| DAWN_TEST_UNSUPPORTED_IF(!IsValidDepthCopyTextureFormat()); |
| |
| constexpr uint32_t kWidth = 4; |
| constexpr uint32_t kHeight = 4; |
| |
| wgpu::Texture texture = CreateInitializeDepthStencilTextureAndCopyT2T( |
| 0.1f, 0.3f, 1u, 3u, kWidth, kHeight, wgpu::TextureUsage::RenderAttachment); |
| |
| // Check the depth |
| ExpectAttachmentDepthTestData(texture, GetParam().mTextureFormat, kWidth, kHeight, 0, 0, |
| { |
| 0.1, 0.1, 0.1, 0.1, // |
| 0.1, 0.1, 0.1, 0.1, // |
| 0.3, 0.3, 0.1, 0.1, // |
| 0.3, 0.3, 0.1, 0.1, // |
| }); |
| } |
| |
| // Test copying both aspects in a T2T copy, then copying only depth at a nonzero mip. |
| TEST_P(DepthStencilCopyTests, T2TBothAspectsThenCopyNonZeroMipDepth) { |
| DAWN_TEST_UNSUPPORTED_IF(!IsValidDepthCopyTextureFormat()); |
| |
| wgpu::Texture texture = CreateInitializeDepthStencilTextureAndCopyT2T( |
| 0.1f, 0.3f, 1u, 3u, 8, 8, wgpu::TextureUsage::RenderAttachment, 1); |
| |
| // Check the depth |
| ExpectAttachmentDepthTestData(texture, GetParam().mTextureFormat, 4, 4, 0, 1, |
| { |
| 0.1, 0.1, 0.1, 0.1, // |
| 0.1, 0.1, 0.1, 0.1, // |
| 0.3, 0.3, 0.1, 0.1, // |
| 0.3, 0.3, 0.1, 0.1, // |
| }); |
| } |
| |
| // Test copying both aspects in a T2T copy, then copying stencil, then copying depth |
| TEST_P(DepthStencilCopyTests, T2TBothAspectsThenCopyStencilThenDepth) { |
| DAWN_TEST_UNSUPPORTED_IF(!IsValidDepthCopyTextureFormat()); |
| |
| // TODO(crbug.com/dawn/667): Work around some platforms' inability to read back stencil. |
| DAWN_TEST_UNSUPPORTED_IF(HasToggleEnabled("disable_depth_stencil_read")); |
| |
| constexpr uint32_t kWidth = 4; |
| constexpr uint32_t kHeight = 4; |
| |
| wgpu::Texture texture = CreateInitializeDepthStencilTextureAndCopyT2T( |
| 0.1f, 0.3f, 1u, 3u, kWidth, kHeight, |
| wgpu::TextureUsage::CopySrc | wgpu::TextureUsage::RenderAttachment); |
| |
| // Check the stencil |
| std::vector<uint8_t> expectedData = { |
| 1u, 1u, 1u, 1u, // |
| 1u, 1u, 1u, 1u, // |
| 3u, 3u, 1u, 1u, // |
| 3u, 3u, 1u, 1u, // |
| }; |
| EXPECT_TEXTURE_EQ(expectedData.data(), texture, {0, 0}, {kWidth, kHeight}, 0, |
| wgpu::TextureAspect::StencilOnly); |
| |
| // Check the depth |
| ExpectAttachmentDepthTestData(texture, GetParam().mTextureFormat, kWidth, kHeight, 0, 0, |
| { |
| 0.1, 0.1, 0.1, 0.1, // |
| 0.1, 0.1, 0.1, 0.1, // |
| 0.3, 0.3, 0.1, 0.1, // |
| 0.3, 0.3, 0.1, 0.1, // |
| }); |
| } |
| |
| // Test copying both aspects in a T2T copy, then copying depth, then copying stencil |
| TEST_P(DepthStencilCopyTests, T2TBothAspectsThenCopyDepthThenStencil) { |
| DAWN_TEST_UNSUPPORTED_IF(!IsValidDepthCopyTextureFormat()); |
| |
| // TODO(crbug.com/dawn/704): Readback after clear via stencil copy does not work |
| // on some Intel drivers. |
| // It seems like the depth readback copy mutates the stencil because the previous |
| // test T2TBothAspectsThenCopyStencil passes. |
| // T2TBothAspectsThenCopyStencilThenDepth which checks stencil first also passes. |
| DAWN_SUPPRESS_TEST_IF(IsMetal() && IsIntel()); |
| |
| // TODO(crbug.com/dawn/667): Work around the fact that some platforms are unable to read |
| // stencil. |
| DAWN_TEST_UNSUPPORTED_IF(HasToggleEnabled("disable_depth_stencil_read")); |
| |
| constexpr uint32_t kWidth = 4; |
| constexpr uint32_t kHeight = 4; |
| |
| wgpu::Texture texture = CreateInitializeDepthStencilTextureAndCopyT2T( |
| 0.1f, 0.3f, 1u, 3u, kWidth, kHeight, |
| wgpu::TextureUsage::CopySrc | wgpu::TextureUsage::RenderAttachment); |
| |
| // Check the depth |
| ExpectAttachmentDepthTestData(texture, GetParam().mTextureFormat, kWidth, kHeight, 0, 0, |
| { |
| 0.1, 0.1, 0.1, 0.1, // |
| 0.1, 0.1, 0.1, 0.1, // |
| 0.3, 0.3, 0.1, 0.1, // |
| 0.3, 0.3, 0.1, 0.1, // |
| }); |
| |
| // Check the stencil |
| std::vector<uint8_t> expectedData = { |
| 1u, 1u, 1u, 1u, // |
| 1u, 1u, 1u, 1u, // |
| 3u, 3u, 1u, 1u, // |
| 3u, 3u, 1u, 1u, // |
| }; |
| EXPECT_TEXTURE_EQ(expectedData.data(), texture, {0, 0}, {kWidth, kHeight}, 0, |
| wgpu::TextureAspect::StencilOnly); |
| } |
| |
| class DepthCopyTests : public DepthStencilCopyTests {}; |
| |
| // Test copying the depth-only aspect into a buffer. |
| TEST_P(DepthCopyTests, FromDepthAspect) { |
| // TODO(crbug.com/dawn/1237): Depth16Unorm test failed on OpenGL and OpenGLES which says |
| // Invalid format and type combination in glReadPixels |
| DAWN_TEST_UNSUPPORTED_IF(GetParam().mTextureFormat == wgpu::TextureFormat::Depth16Unorm && |
| (IsOpenGL() || IsOpenGLES())); |
| |
| constexpr uint32_t kWidth = 4; |
| constexpr uint32_t kHeight = 4; |
| |
| wgpu::Texture texture = CreateTexture( |
| kWidth, kHeight, wgpu::TextureUsage::RenderAttachment | wgpu::TextureUsage::CopySrc); |
| |
| constexpr float kInitDepth = 0.2f; |
| InitializeDepthTextureRegion(texture, 0.f, kInitDepth); |
| |
| // This expectation is the test as it performs the CopyTextureToBuffer. |
| if (GetParam().mTextureFormat == wgpu::TextureFormat::Depth16Unorm) { |
| uint16_t expected = FloatToUnorm<uint16_t>(kInitDepth); |
| std::vector<uint16_t> expectedData = { |
| 0, 0, 0, 0, // |
| 0, 0, 0, 0, // |
| expected, expected, 0, 0, // |
| expected, expected, 0, 0, // |
| }; |
| EXPECT_TEXTURE_EQ(expectedData.data(), texture, {0, 0}, {kWidth, kHeight}, 0, |
| wgpu::TextureAspect::DepthOnly); |
| } else { |
| std::vector<float> expectedData = { |
| 0.0, 0.0, 0.0, 0.0, // |
| 0.0, 0.0, 0.0, 0.0, // |
| kInitDepth, kInitDepth, 0.0, 0.0, // |
| kInitDepth, kInitDepth, 0.0, 0.0, // |
| }; |
| EXPECT_TEXTURE_EQ(expectedData.data(), texture, {0, 0}, {kWidth, kHeight}, 0, |
| wgpu::TextureAspect::DepthOnly); |
| } |
| } |
| |
| // Test copying the non-zero mip, depth-only aspect into a buffer. |
| TEST_P(DepthCopyTests, FromNonZeroMipDepthAspect) { |
| // TODO(crbug.com/dawn/1237): Depth16Unorm test failed on OpenGL and OpenGLES which says |
| // Invalid format and type combination in glReadPixels |
| DAWN_TEST_UNSUPPORTED_IF(GetParam().mTextureFormat == wgpu::TextureFormat::Depth16Unorm && |
| (IsOpenGL() || IsOpenGLES())); |
| |
| wgpu::Texture depthTexture = CreateDepthTexture( |
| 9, 9, wgpu::TextureUsage::RenderAttachment | wgpu::TextureUsage::CopySrc, 2); |
| |
| constexpr float kInitDepth = 0.4f; |
| InitializeDepthTextureRegion(depthTexture, 0.f, kInitDepth, 1); |
| |
| // This expectation is the test as it performs the CopyTextureToBuffer. |
| if (GetParam().mTextureFormat == wgpu::TextureFormat::Depth16Unorm) { |
| uint16_t expected = FloatToUnorm<uint16_t>(kInitDepth); |
| std::vector<uint16_t> expectedData = { |
| 0, 0, 0, 0, // |
| 0, 0, 0, 0, // |
| expected, expected, 0, 0, // |
| expected, expected, 0, 0, // |
| }; |
| EXPECT_TEXTURE_EQ(expectedData.data(), depthTexture, {0, 0}, {4, 4}, 1, |
| wgpu::TextureAspect::DepthOnly); |
| } else { |
| std::vector<float> expectedData = { |
| 0.0, 0.0, 0.0, 0.0, // |
| 0.0, 0.0, 0.0, 0.0, // |
| kInitDepth, kInitDepth, 0.0, 0.0, // |
| kInitDepth, kInitDepth, 0.0, 0.0, // |
| }; |
| EXPECT_TEXTURE_EQ(expectedData.data(), depthTexture, {0, 0}, {4, 4}, 1, |
| wgpu::TextureAspect::DepthOnly); |
| } |
| } |
| |
| class StencilCopyTests : public DepthStencilCopyTests {}; |
| |
| // Test copying the stencil-only aspect into a buffer. |
| TEST_P(StencilCopyTests, FromStencilAspect) { |
| // TODO(crbug.com/dawn/667): Work around the fact that some platforms are unable to read |
| // stencil. |
| DAWN_TEST_UNSUPPORTED_IF(HasToggleEnabled("disable_depth_stencil_read")); |
| |
| constexpr uint32_t kWidth = 4; |
| constexpr uint32_t kHeight = 4; |
| |
| wgpu::Texture depthStencilTexture = CreateDepthStencilTexture( |
| kWidth, kHeight, wgpu::TextureUsage::RenderAttachment | wgpu::TextureUsage::CopySrc); |
| |
| InitializeDepthStencilTextureRegion(depthStencilTexture, 0.f, 0.3f, 0u, 1u); |
| |
| // This expectation is the test as it performs the CopyTextureToBuffer. |
| std::vector<uint8_t> expectedData = { |
| 0u, 0u, 0u, 0u, // |
| 0u, 0u, 0u, 0u, // |
| 1u, 1u, 0u, 0u, // |
| 1u, 1u, 0u, 0u, // |
| }; |
| EXPECT_TEXTURE_EQ(expectedData.data(), depthStencilTexture, {0, 0}, {kWidth, kHeight}, 0, |
| wgpu::TextureAspect::StencilOnly); |
| } |
| |
| // Test copying the non-zero mip, stencil-only aspect into a buffer. |
| TEST_P(StencilCopyTests, FromNonZeroMipStencilAspect) { |
| // TODO(crbug.com/dawn/704): Readback after clear via stencil copy does not work |
| // on some Intel drivers. |
| DAWN_SUPPRESS_TEST_IF(IsMetal() && IsIntel()); |
| |
| // TODO(crbug.com/dawn/667): Work around some platforms' inability to read back stencil. |
| DAWN_TEST_UNSUPPORTED_IF(HasToggleEnabled("disable_depth_stencil_read")); |
| |
| wgpu::Texture depthStencilTexture = CreateDepthStencilTexture( |
| 9, 9, wgpu::TextureUsage::RenderAttachment | wgpu::TextureUsage::CopySrc, 2); |
| |
| InitializeDepthStencilTextureRegion(depthStencilTexture, 0.f, 0.3f, 0u, 1u, 1u); |
| |
| // This expectation is the test as it performs the CopyTextureToBuffer. |
| std::vector<uint8_t> expectedData = { |
| 0u, 0u, 0u, 0u, // |
| 0u, 0u, 0u, 0u, // |
| 1u, 1u, 0u, 0u, // |
| 1u, 1u, 0u, 0u, // |
| }; |
| EXPECT_TEXTURE_EQ(expectedData.data(), depthStencilTexture, {0, 0}, {4, 4}, 1, |
| wgpu::TextureAspect::StencilOnly); |
| } |
| |
| // Test copying to the stencil-aspect of a buffer |
| TEST_P(StencilCopyTests, ToStencilAspect) { |
| // Copies to a single aspect are unsupported on OpenGL. |
| DAWN_TEST_UNSUPPORTED_IF(IsOpenGL()); |
| DAWN_TEST_UNSUPPORTED_IF(IsOpenGLES()); |
| |
| // TODO(crbug.com/dawn/704): Readback after clear via stencil copy does not work |
| // on some Intel drivers. |
| DAWN_SUPPRESS_TEST_IF(IsMetal() && IsIntel()); |
| |
| // Create a stencil texture |
| constexpr uint32_t kWidth = 4; |
| constexpr uint32_t kHeight = 4; |
| |
| wgpu::Texture depthStencilTexture = |
| CreateDepthStencilTexture(kWidth, kHeight, |
| wgpu::TextureUsage::RenderAttachment | |
| wgpu::TextureUsage::CopySrc | wgpu::TextureUsage::CopyDst); |
| |
| { |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| |
| // Clear depth to 0.7, so we can check that the stencil copy doesn't mutate the depth. |
| utils::ComboRenderPassDescriptor passDescriptor({}, depthStencilTexture.CreateView()); |
| passDescriptor.cDepthStencilAttachmentInfo.clearDepth = 0.7; |
| |
| wgpu::RenderPassEncoder pass = commandEncoder.BeginRenderPass(&passDescriptor); |
| pass.EndPass(); |
| |
| wgpu::CommandBuffer commands = commandEncoder.Finish(); |
| queue.Submit(1, &commands); |
| } |
| |
| std::vector<uint8_t> stencilData = { |
| 1u, 2u, 3u, 4u, // |
| 5u, 6u, 7u, 8u, // |
| 9u, 10u, 11u, 12u, // |
| 13u, 14u, 15u, 16u, // |
| }; |
| |
| // After copying stencil data in, we will decrement stencil values in the bottom left |
| // of the screen. This is the expected result. |
| std::vector<uint8_t> expectedStencilData = { |
| 1u, 2u, 3u, 4u, // |
| 5u, 6u, 7u, 8u, // |
| 8u, 9u, 11u, 12u, // |
| 12u, 13u, 15u, 16u, // |
| }; |
| |
| // Upload the stencil data. |
| wgpu::TextureDataLayout stencilDataLayout = {}; |
| stencilDataLayout.bytesPerRow = kWidth * sizeof(uint8_t); |
| |
| wgpu::ImageCopyTexture stencilDataCopyTexture = utils::CreateImageCopyTexture( |
| depthStencilTexture, 0, {0, 0, 0}, wgpu::TextureAspect::StencilOnly); |
| |
| wgpu::Extent3D writeSize = {kWidth, kHeight, 1}; |
| queue.WriteTexture(&stencilDataCopyTexture, stencilData.data(), |
| stencilData.size() * sizeof(uint8_t), &stencilDataLayout, &writeSize); |
| |
| // Decrement the stencil value in a render pass to ensure the data is visible to the pipeline. |
| { |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| // Create a render pipline which decrements the stencil value for passing fragments. |
| // A quad is drawn in the bottom left. |
| utils::ComboRenderPipelineDescriptor renderPipelineDesc; |
| renderPipelineDesc.vertex.module = mVertexModule; |
| renderPipelineDesc.cFragment.module = utils::CreateShaderModule(device, R"( |
| [[stage(fragment)]] fn main() { |
| })"); |
| wgpu::DepthStencilState* depthStencil = |
| renderPipelineDesc.EnableDepthStencil(GetParam().mTextureFormat); |
| depthStencil->stencilFront.passOp = wgpu::StencilOperation::DecrementClamp; |
| renderPipelineDesc.cFragment.targetCount = 0; |
| |
| wgpu::RenderPipeline pipeline = device.CreateRenderPipeline(&renderPipelineDesc); |
| |
| // Create a render pass which loads the stencil. We want to load the values we |
| // copied in. Also load the canary depth values so they're not lost. |
| utils::ComboRenderPassDescriptor passDescriptor({}, depthStencilTexture.CreateView()); |
| passDescriptor.cDepthStencilAttachmentInfo.stencilLoadOp = wgpu::LoadOp::Load; |
| passDescriptor.cDepthStencilAttachmentInfo.depthLoadOp = wgpu::LoadOp::Load; |
| |
| // Draw the quad in the bottom left (two triangles). |
| wgpu::RenderPassEncoder pass = commandEncoder.BeginRenderPass(&passDescriptor); |
| pass.SetPipeline(pipeline); |
| pass.Draw(6); |
| pass.EndPass(); |
| |
| wgpu::CommandBuffer commands = commandEncoder.Finish(); |
| queue.Submit(1, &commands); |
| } |
| |
| // Copy back the stencil data and check it is correct. |
| EXPECT_TEXTURE_EQ(expectedStencilData.data(), depthStencilTexture, {0, 0}, {kWidth, kHeight}, 0, |
| wgpu::TextureAspect::StencilOnly); |
| |
| ExpectAttachmentDepthTestData(depthStencilTexture, GetParam().mTextureFormat, kWidth, kHeight, |
| 0, 0, |
| { |
| 0.7, 0.7, 0.7, 0.7, // |
| 0.7, 0.7, 0.7, 0.7, // |
| 0.7, 0.7, 0.7, 0.7, // |
| 0.7, 0.7, 0.7, 0.7, // |
| }); |
| } |
| |
| DAWN_INSTANTIATE_TEST_P(DepthStencilCopyTests, |
| {D3D12Backend(), MetalBackend(), OpenGLBackend(), OpenGLESBackend(), |
| VulkanBackend()}, |
| std::vector<wgpu::TextureFormat>(utils::kDepthAndStencilFormats.begin(), |
| utils::kDepthAndStencilFormats.end())); |
| |
| DAWN_INSTANTIATE_TEST_P(DepthCopyTests, |
| {D3D12Backend(), MetalBackend(), OpenGLBackend(), OpenGLESBackend(), |
| VulkanBackend()}, |
| std::vector<wgpu::TextureFormat>(kValidDepthCopyTextureFormats.begin(), |
| kValidDepthCopyTextureFormats.end())); |
| |
| DAWN_INSTANTIATE_TEST_P(StencilCopyTests, |
| {D3D12Backend(), MetalBackend(), OpenGLBackend(), OpenGLESBackend(), |
| VulkanBackend()}, |
| std::vector<wgpu::TextureFormat>(utils::kStencilFormats.begin(), |
| utils::kStencilFormats.end())); |
