| // Copyright 2020 The Tint Authors. | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // http://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| #include "src/tint/resolver/resolver.h" | |
| #include <algorithm> | |
| #include <cmath> | |
| #include <iomanip> | |
| #include <limits> | |
| #include <utility> | |
| #include "src/tint/ast/alias.h" | |
| #include "src/tint/ast/array.h" | |
| #include "src/tint/ast/assignment_statement.h" | |
| #include "src/tint/ast/attribute.h" | |
| #include "src/tint/ast/bitcast_expression.h" | |
| #include "src/tint/ast/break_statement.h" | |
| #include "src/tint/ast/call_statement.h" | |
| #include "src/tint/ast/continue_statement.h" | |
| #include "src/tint/ast/depth_texture.h" | |
| #include "src/tint/ast/disable_validation_attribute.h" | |
| #include "src/tint/ast/discard_statement.h" | |
| #include "src/tint/ast/for_loop_statement.h" | |
| #include "src/tint/ast/id_attribute.h" | |
| #include "src/tint/ast/if_statement.h" | |
| #include "src/tint/ast/internal_attribute.h" | |
| #include "src/tint/ast/interpolate_attribute.h" | |
| #include "src/tint/ast/loop_statement.h" | |
| #include "src/tint/ast/matrix.h" | |
| #include "src/tint/ast/pointer.h" | |
| #include "src/tint/ast/return_statement.h" | |
| #include "src/tint/ast/sampled_texture.h" | |
| #include "src/tint/ast/sampler.h" | |
| #include "src/tint/ast/storage_texture.h" | |
| #include "src/tint/ast/switch_statement.h" | |
| #include "src/tint/ast/traverse_expressions.h" | |
| #include "src/tint/ast/type_name.h" | |
| #include "src/tint/ast/unary_op_expression.h" | |
| #include "src/tint/ast/variable_decl_statement.h" | |
| #include "src/tint/ast/vector.h" | |
| #include "src/tint/ast/while_statement.h" | |
| #include "src/tint/ast/workgroup_attribute.h" | |
| #include "src/tint/resolver/uniformity.h" | |
| #include "src/tint/sem/break_if_statement.h" | |
| #include "src/tint/sem/call.h" | |
| #include "src/tint/sem/for_loop_statement.h" | |
| #include "src/tint/sem/function.h" | |
| #include "src/tint/sem/if_statement.h" | |
| #include "src/tint/sem/index_accessor_expression.h" | |
| #include "src/tint/sem/load.h" | |
| #include "src/tint/sem/loop_statement.h" | |
| #include "src/tint/sem/materialize.h" | |
| #include "src/tint/sem/member_accessor_expression.h" | |
| #include "src/tint/sem/module.h" | |
| #include "src/tint/sem/statement.h" | |
| #include "src/tint/sem/struct.h" | |
| #include "src/tint/sem/switch_statement.h" | |
| #include "src/tint/sem/type_conversion.h" | |
| #include "src/tint/sem/type_initializer.h" | |
| #include "src/tint/sem/variable.h" | |
| #include "src/tint/sem/while_statement.h" | |
| #include "src/tint/type/abstract_float.h" | |
| #include "src/tint/type/abstract_int.h" | |
| #include "src/tint/type/array.h" | |
| #include "src/tint/type/atomic.h" | |
| #include "src/tint/type/depth_multisampled_texture.h" | |
| #include "src/tint/type/depth_texture.h" | |
| #include "src/tint/type/multisampled_texture.h" | |
| #include "src/tint/type/pointer.h" | |
| #include "src/tint/type/reference.h" | |
| #include "src/tint/type/sampled_texture.h" | |
| #include "src/tint/type/sampler.h" | |
| #include "src/tint/type/short_name.h" | |
| #include "src/tint/type/storage_texture.h" | |
| #include "src/tint/utils/defer.h" | |
| #include "src/tint/utils/math.h" | |
| #include "src/tint/utils/reverse.h" | |
| #include "src/tint/utils/scoped_assignment.h" | |
| #include "src/tint/utils/string.h" | |
| #include "src/tint/utils/transform.h" | |
| #include "src/tint/utils/vector.h" | |
| namespace tint::resolver { | |
| namespace { | |
| constexpr int64_t kMaxArrayElementCount = 65536; | |
| constexpr uint32_t kMaxStatementDepth = 127; | |
| } // namespace | |
| Resolver::Resolver(ProgramBuilder* builder) | |
| : builder_(builder), | |
| diagnostics_(builder->Diagnostics()), | |
| const_eval_(*builder), | |
| intrinsic_table_(IntrinsicTable::Create(*builder)), | |
| sem_(builder, dependencies_), | |
| validator_(builder, | |
| sem_, | |
| enabled_extensions_, | |
| atomic_composite_info_, | |
| valid_type_storage_layouts_) {} | |
| Resolver::~Resolver() = default; | |
| bool Resolver::Resolve() { | |
| if (builder_->Diagnostics().contains_errors()) { | |
| return false; | |
| } | |
| builder_->Sem().Reserve(builder_->LastAllocatedNodeID()); | |
| // Pre-allocate the marked bitset with the total number of AST nodes. | |
| marked_.Resize(builder_->ASTNodes().Count()); | |
| if (!DependencyGraph::Build(builder_->AST(), builder_->Symbols(), builder_->Diagnostics(), | |
| dependencies_)) { | |
| return false; | |
| } | |
| bool result = ResolveInternal(); | |
| if (!result && !diagnostics_.contains_errors()) { | |
| TINT_ICE(Resolver, diagnostics_) << "resolving failed, but no error was raised"; | |
| return false; | |
| } | |
| // Create the semantic module | |
| builder_->Sem().SetModule(builder_->create<sem::Module>( | |
| std::move(dependencies_.ordered_globals), std::move(enabled_extensions_))); | |
| return result; | |
| } | |
| bool Resolver::ResolveInternal() { | |
| Mark(&builder_->AST()); | |
| // Process all module-scope declarations in dependency order. | |
| for (auto* decl : dependencies_.ordered_globals) { | |
| Mark(decl); | |
| if (!Switch<bool>( | |
| decl, // | |
| [&](const ast::Enable* e) { return Enable(e); }, | |
| [&](const ast::TypeDecl* td) { return TypeDecl(td); }, | |
| [&](const ast::Function* func) { return Function(func); }, | |
| [&](const ast::Variable* var) { return GlobalVariable(var); }, | |
| [&](const ast::StaticAssert* sa) { return StaticAssert(sa); }, | |
| [&](Default) { | |
| TINT_UNREACHABLE(Resolver, diagnostics_) | |
| << "unhandled global declaration: " << decl->TypeInfo().name; | |
| return false; | |
| })) { | |
| return false; | |
| } | |
| } | |
| if (!AllocateOverridableConstantIds()) { | |
| return false; | |
| } | |
| SetShadows(); | |
| if (!validator_.PipelineStages(entry_points_)) { | |
| return false; | |
| } | |
| if (!validator_.PushConstants(entry_points_)) { | |
| return false; | |
| } | |
| if (!enabled_extensions_.Contains(ast::Extension::kChromiumDisableUniformityAnalysis)) { | |
| if (!AnalyzeUniformity(builder_, dependencies_)) { | |
| if (kUniformityFailuresAsError) { | |
| return false; | |
| } | |
| } | |
| } | |
| bool result = true; | |
| for (auto* node : builder_->ASTNodes().Objects()) { | |
| if (!marked_[node->node_id.value]) { | |
| TINT_ICE(Resolver, diagnostics_) | |
| << "AST node '" << node->TypeInfo().name << "' was not reached by the resolver\n" | |
| << "At: " << node->source << "\n" | |
| << "Pointer: " << node; | |
| result = false; | |
| } | |
| } | |
| return result; | |
| } | |
| type::Type* Resolver::Type(const ast::Type* ty) { | |
| Mark(ty); | |
| auto* s = Switch( | |
| ty, // | |
| [&](const ast::Void*) { return builder_->create<type::Void>(); }, | |
| [&](const ast::Bool*) { return builder_->create<type::Bool>(); }, | |
| [&](const ast::I32*) { return builder_->create<type::I32>(); }, | |
| [&](const ast::U32*) { return builder_->create<type::U32>(); }, | |
| [&](const ast::F16* t) -> type::F16* { | |
| return validator_.CheckF16Enabled(t->source) ? builder_->create<type::F16>() : nullptr; | |
| }, | |
| [&](const ast::F32*) { return builder_->create<type::F32>(); }, | |
| [&](const ast::Vector* t) -> type::Vector* { | |
| if (!t->type) { | |
| AddError("missing vector element type", t->source.End()); | |
| return nullptr; | |
| } | |
| if (auto* el = Type(t->type)) { | |
| if (auto* vector = builder_->create<type::Vector>(el, t->width)) { | |
| if (validator_.Vector(vector, t->source)) { | |
| return vector; | |
| } | |
| } | |
| } | |
| return nullptr; | |
| }, | |
| [&](const ast::Matrix* t) -> type::Matrix* { | |
| if (!t->type) { | |
| AddError("missing matrix element type", t->source.End()); | |
| return nullptr; | |
| } | |
| if (auto* el = Type(t->type)) { | |
| if (auto* column_type = builder_->create<type::Vector>(el, t->rows)) { | |
| if (auto* matrix = builder_->create<type::Matrix>(column_type, t->columns)) { | |
| if (validator_.Matrix(matrix, t->source)) { | |
| return matrix; | |
| } | |
| } | |
| } | |
| } | |
| return nullptr; | |
| }, | |
| [&](const ast::Array* t) { return Array(t); }, | |
| [&](const ast::Atomic* t) -> type::Atomic* { | |
| if (auto* el = Type(t->type)) { | |
| auto* a = builder_->create<type::Atomic>(el); | |
| if (!validator_.Atomic(t, a)) { | |
| return nullptr; | |
| } | |
| return a; | |
| } | |
| return nullptr; | |
| }, | |
| [&](const ast::Pointer* t) -> type::Pointer* { | |
| if (auto* el = Type(t->type)) { | |
| auto access = t->access; | |
| if (access == ast::Access::kUndefined) { | |
| access = DefaultAccessForAddressSpace(t->address_space); | |
| } | |
| auto ptr = builder_->create<type::Pointer>(el, t->address_space, access); | |
| if (!ptr) { | |
| return nullptr; | |
| } | |
| if (!validator_.Pointer(t, ptr)) { | |
| return nullptr; | |
| } | |
| if (!ApplyAddressSpaceUsageToType(t->address_space, el, t->type->source)) { | |
| AddNote("while instantiating " + builder_->FriendlyName(ptr), t->source); | |
| return nullptr; | |
| } | |
| return ptr; | |
| } | |
| return nullptr; | |
| }, | |
| [&](const ast::Sampler* t) { return builder_->create<type::Sampler>(t->kind); }, | |
| [&](const ast::SampledTexture* t) -> type::SampledTexture* { | |
| if (auto* el = Type(t->type)) { | |
| auto* sem = builder_->create<type::SampledTexture>(t->dim, el); | |
| if (!validator_.SampledTexture(sem, t->source)) { | |
| return nullptr; | |
| } | |
| return sem; | |
| } | |
| return nullptr; | |
| }, | |
| [&](const ast::MultisampledTexture* t) -> type::MultisampledTexture* { | |
| if (auto* el = Type(t->type)) { | |
| auto* sem = builder_->create<type::MultisampledTexture>(t->dim, el); | |
| if (!validator_.MultisampledTexture(sem, t->source)) { | |
| return nullptr; | |
| } | |
| return sem; | |
| } | |
| return nullptr; | |
| }, | |
| [&](const ast::DepthTexture* t) { return builder_->create<type::DepthTexture>(t->dim); }, | |
| [&](const ast::DepthMultisampledTexture* t) { | |
| return builder_->create<type::DepthMultisampledTexture>(t->dim); | |
| }, | |
| [&](const ast::StorageTexture* t) -> type::StorageTexture* { | |
| if (auto* el = Type(t->type)) { | |
| if (!validator_.StorageTexture(t)) { | |
| return nullptr; | |
| } | |
| return builder_->create<type::StorageTexture>(t->dim, t->format, t->access, el); | |
| } | |
| return nullptr; | |
| }, | |
| [&](const ast::ExternalTexture*) { return builder_->create<type::ExternalTexture>(); }, | |
| [&](Default) { | |
| auto* resolved = sem_.ResolvedSymbol(ty); | |
| return Switch( | |
| resolved, // | |
| [&](type::Type* type) { return type; }, | |
| [&](sem::Variable* var) { | |
| auto name = builder_->Symbols().NameFor(var->Declaration()->symbol); | |
| AddError("cannot use variable '" + name + "' as type", ty->source); | |
| AddNote("'" + name + "' declared here", var->Declaration()->source); | |
| return nullptr; | |
| }, | |
| [&](sem::Function* func) { | |
| auto name = builder_->Symbols().NameFor(func->Declaration()->symbol); | |
| AddError("cannot use function '" + name + "' as type", ty->source); | |
| AddNote("'" + name + "' declared here", func->Declaration()->source); | |
| return nullptr; | |
| }, | |
| [&](Default) -> type::Type* { | |
| if (auto* tn = ty->As<ast::TypeName>()) { | |
| if (IsBuiltin(tn->name)) { | |
| auto name = builder_->Symbols().NameFor(tn->name); | |
| AddError("cannot use builtin '" + name + "' as type", ty->source); | |
| return nullptr; | |
| } | |
| return ShortName(tn->name, tn->source); | |
| } | |
| TINT_UNREACHABLE(Resolver, diagnostics_) | |
| << "Unhandled resolved type '" | |
| << (resolved ? resolved->TypeInfo().name : "<null>") | |
| << "' resolved from ast::Type '" << ty->TypeInfo().name << "'"; | |
| return nullptr; | |
| }); | |
| }); | |
| if (s) { | |
| builder_->Sem().Add(ty, s); | |
| } | |
| return s; | |
| } | |
| sem::Variable* Resolver::Variable(const ast::Variable* v, bool is_global) { | |
| return Switch( | |
| v, // | |
| [&](const ast::Var* var) { return Var(var, is_global); }, | |
| [&](const ast::Let* let) { return Let(let, is_global); }, | |
| [&](const ast::Override* override) { return Override(override); }, | |
| [&](const ast::Const* const_) { return Const(const_, is_global); }, | |
| [&](Default) { | |
| TINT_ICE(Resolver, diagnostics_) | |
| << "Resolver::GlobalVariable() called with a unknown variable type: " | |
| << v->TypeInfo().name; | |
| return nullptr; | |
| }); | |
| } | |
| sem::Variable* Resolver::Let(const ast::Let* v, bool is_global) { | |
| const type::Type* ty = nullptr; | |
| // If the variable has a declared type, resolve it. | |
| if (v->type) { | |
| ty = Type(v->type); | |
| if (!ty) { | |
| return nullptr; | |
| } | |
| } | |
| if (!v->initializer) { | |
| AddError("'let' declaration must have an initializer", v->source); | |
| return nullptr; | |
| } | |
| auto* rhs = Load(Materialize(Expression(v->initializer), ty)); | |
| if (!rhs) { | |
| return nullptr; | |
| } | |
| // If the variable has no declared type, infer it from the RHS | |
| if (!ty) { | |
| ty = rhs->Type()->UnwrapRef(); // Implicit load of RHS | |
| } | |
| if (rhs && !validator_.VariableInitializer(v, ast::AddressSpace::kNone, ty, rhs)) { | |
| return nullptr; | |
| } | |
| if (!ApplyAddressSpaceUsageToType(ast::AddressSpace::kNone, const_cast<type::Type*>(ty), | |
| v->source)) { | |
| AddNote("while instantiating 'let' " + builder_->Symbols().NameFor(v->symbol), v->source); | |
| return nullptr; | |
| } | |
| sem::Variable* sem = nullptr; | |
| if (is_global) { | |
| sem = builder_->create<sem::GlobalVariable>( | |
| v, ty, sem::EvaluationStage::kRuntime, ast::AddressSpace::kNone, | |
| ast::Access::kUndefined, | |
| /* constant_value */ nullptr, sem::BindingPoint{}, std::nullopt); | |
| } else { | |
| sem = builder_->create<sem::LocalVariable>(v, ty, sem::EvaluationStage::kRuntime, | |
| ast::AddressSpace::kNone, | |
| ast::Access::kUndefined, current_statement_, | |
| /* constant_value */ nullptr); | |
| } | |
| sem->SetInitializer(rhs); | |
| builder_->Sem().Add(v, sem); | |
| return sem; | |
| } | |
| sem::Variable* Resolver::Override(const ast::Override* v) { | |
| const type::Type* ty = nullptr; | |
| // If the variable has a declared type, resolve it. | |
| if (v->type) { | |
| ty = Type(v->type); | |
| if (!ty) { | |
| return nullptr; | |
| } | |
| } | |
| const sem::Expression* rhs = nullptr; | |
| // Does the variable have an initializer? | |
| if (v->initializer) { | |
| // Note: RHS must be a const or override expression, which excludes references. | |
| // So there's no need to load or unwrap references here. | |
| ExprEvalStageConstraint constraint{sem::EvaluationStage::kOverride, "override initializer"}; | |
| TINT_SCOPED_ASSIGNMENT(expr_eval_stage_constraint_, constraint); | |
| rhs = Materialize(Expression(v->initializer), ty); | |
| if (!rhs) { | |
| return nullptr; | |
| } | |
| // If the variable has no declared type, infer it from the RHS | |
| if (!ty) { | |
| ty = rhs->Type(); | |
| } | |
| } else if (!ty) { | |
| AddError("override declaration requires a type or initializer", v->source); | |
| return nullptr; | |
| } | |
| if (rhs && !validator_.VariableInitializer(v, ast::AddressSpace::kNone, ty, rhs)) { | |
| return nullptr; | |
| } | |
| if (!ApplyAddressSpaceUsageToType(ast::AddressSpace::kNone, const_cast<type::Type*>(ty), | |
| v->source)) { | |
| AddNote("while instantiating 'override' " + builder_->Symbols().NameFor(v->symbol), | |
| v->source); | |
| return nullptr; | |
| } | |
| auto* sem = builder_->create<sem::GlobalVariable>( | |
| v, ty, sem::EvaluationStage::kOverride, ast::AddressSpace::kNone, ast::Access::kUndefined, | |
| /* constant_value */ nullptr, sem::BindingPoint{}, std::nullopt); | |
| sem->SetInitializer(rhs); | |
| if (auto* id_attr = ast::GetAttribute<ast::IdAttribute>(v->attributes)) { | |
| ExprEvalStageConstraint constraint{sem::EvaluationStage::kConstant, "@id"}; | |
| TINT_SCOPED_ASSIGNMENT(expr_eval_stage_constraint_, constraint); | |
| auto* materialized = Materialize(Expression(id_attr->expr)); | |
| if (!materialized) { | |
| return nullptr; | |
| } | |
| if (!materialized->Type()->IsAnyOf<type::I32, type::U32>()) { | |
| AddError("@id must be an i32 or u32 value", id_attr->source); | |
| return nullptr; | |
| } | |
| auto const_value = materialized->ConstantValue(); | |
| auto value = const_value->ValueAs<AInt>(); | |
| if (value < 0) { | |
| AddError("@id value must be non-negative", id_attr->source); | |
| return nullptr; | |
| } | |
| if (value > std::numeric_limits<decltype(OverrideId::value)>::max()) { | |
| AddError("@id value must be between 0 and " + | |
| std::to_string(std::numeric_limits<decltype(OverrideId::value)>::max()), | |
| id_attr->source); | |
| return nullptr; | |
| } | |
| auto o = OverrideId{static_cast<decltype(OverrideId::value)>(value)}; | |
| sem->SetOverrideId(o); | |
| // Track the constant IDs that are specified in the shader. | |
| override_ids_.Add(o, sem); | |
| } | |
| builder_->Sem().Add(v, sem); | |
| return sem; | |
| } | |
| sem::Variable* Resolver::Const(const ast::Const* c, bool is_global) { | |
| const type::Type* ty = nullptr; | |
| // If the variable has a declared type, resolve it. | |
| if (c->type) { | |
| ty = Type(c->type); | |
| if (!ty) { | |
| return nullptr; | |
| } | |
| } | |
| if (!c->initializer) { | |
| AddError("'const' declaration must have an initializer", c->source); | |
| return nullptr; | |
| } | |
| const sem::Expression* rhs = nullptr; | |
| { | |
| ExprEvalStageConstraint constraint{sem::EvaluationStage::kConstant, "const initializer"}; | |
| TINT_SCOPED_ASSIGNMENT(expr_eval_stage_constraint_, constraint); | |
| rhs = Expression(c->initializer); | |
| if (!rhs) { | |
| return nullptr; | |
| } | |
| } | |
| // Note: RHS must be a const expression, which excludes references. | |
| // So there's no need to load or unwrap references here. | |
| if (ty) { | |
| // If an explicit type was specified, materialize to that type | |
| rhs = Materialize(rhs, ty); | |
| if (!rhs) { | |
| return nullptr; | |
| } | |
| } else { | |
| // If no type was specified, infer it from the RHS | |
| ty = rhs->Type(); | |
| } | |
| if (!validator_.VariableInitializer(c, ast::AddressSpace::kNone, ty, rhs)) { | |
| return nullptr; | |
| } | |
| if (!ApplyAddressSpaceUsageToType(ast::AddressSpace::kNone, const_cast<type::Type*>(ty), | |
| c->source)) { | |
| AddNote("while instantiating 'const' " + builder_->Symbols().NameFor(c->symbol), c->source); | |
| return nullptr; | |
| } | |
| const auto value = rhs->ConstantValue(); | |
| auto* sem = is_global ? static_cast<sem::Variable*>(builder_->create<sem::GlobalVariable>( | |
| c, ty, sem::EvaluationStage::kConstant, ast::AddressSpace::kNone, | |
| ast::Access::kUndefined, value, sem::BindingPoint{}, std::nullopt)) | |
| : static_cast<sem::Variable*>(builder_->create<sem::LocalVariable>( | |
| c, ty, sem::EvaluationStage::kConstant, ast::AddressSpace::kNone, | |
| ast::Access::kUndefined, current_statement_, value)); | |
| sem->SetInitializer(rhs); | |
| builder_->Sem().Add(c, sem); | |
| return sem; | |
| } | |
| sem::Variable* Resolver::Var(const ast::Var* var, bool is_global) { | |
| const type::Type* storage_ty = nullptr; | |
| // If the variable has a declared type, resolve it. | |
| if (auto* ty = var->type) { | |
| storage_ty = Type(ty); | |
| if (!storage_ty) { | |
| return nullptr; | |
| } | |
| } | |
| const sem::Expression* rhs = nullptr; | |
| // Does the variable have a initializer? | |
| if (var->initializer) { | |
| ExprEvalStageConstraint constraint{ | |
| is_global ? sem::EvaluationStage::kOverride : sem::EvaluationStage::kRuntime, | |
| "var initializer", | |
| }; | |
| TINT_SCOPED_ASSIGNMENT(expr_eval_stage_constraint_, constraint); | |
| rhs = Load(Materialize(Expression(var->initializer), storage_ty)); | |
| if (!rhs) { | |
| return nullptr; | |
| } | |
| // If the variable has no declared type, infer it from the RHS | |
| if (!storage_ty) { | |
| storage_ty = rhs->Type(); | |
| } | |
| } | |
| if (!storage_ty) { | |
| AddError("var declaration requires a type or initializer", var->source); | |
| return nullptr; | |
| } | |
| auto address_space = var->declared_address_space; | |
| if (address_space == ast::AddressSpace::kNone) { | |
| // No declared address space. Infer from usage / type. | |
| if (!is_global) { | |
| address_space = ast::AddressSpace::kFunction; | |
| } else if (storage_ty->UnwrapRef()->is_handle()) { | |
| // https://gpuweb.github.io/gpuweb/wgsl/#module-scope-variables | |
| // If the store type is a texture type or a sampler type, then the | |
| // variable declaration must not have a address space attribute. The | |
| // address space will always be handle. | |
| address_space = ast::AddressSpace::kHandle; | |
| } | |
| } | |
| if (!is_global && address_space != ast::AddressSpace::kFunction && | |
| validator_.IsValidationEnabled(var->attributes, | |
| ast::DisabledValidation::kIgnoreAddressSpace)) { | |
| AddError("function-scope 'var' declaration must use 'function' address space", var->source); | |
| return nullptr; | |
| } | |
| auto access = var->declared_access; | |
| if (access == ast::Access::kUndefined) { | |
| access = DefaultAccessForAddressSpace(address_space); | |
| } | |
| if (rhs && !validator_.VariableInitializer(var, address_space, storage_ty, rhs)) { | |
| return nullptr; | |
| } | |
| auto* var_ty = builder_->create<type::Reference>(storage_ty, address_space, access); | |
| if (!ApplyAddressSpaceUsageToType(address_space, var_ty, | |
| var->type ? var->type->source : var->source)) { | |
| AddNote("while instantiating 'var' " + builder_->Symbols().NameFor(var->symbol), | |
| var->source); | |
| return nullptr; | |
| } | |
| sem::Variable* sem = nullptr; | |
| if (is_global) { | |
| sem::BindingPoint binding_point; | |
| if (var->HasBindingPoint()) { | |
| uint32_t binding = 0; | |
| { | |
| ExprEvalStageConstraint constraint{sem::EvaluationStage::kConstant, "@binding"}; | |
| TINT_SCOPED_ASSIGNMENT(expr_eval_stage_constraint_, constraint); | |
| auto* attr = ast::GetAttribute<ast::BindingAttribute>(var->attributes); | |
| auto* materialized = Materialize(Expression(attr->expr)); | |
| if (!materialized) { | |
| return nullptr; | |
| } | |
| if (!materialized->Type()->IsAnyOf<type::I32, type::U32>()) { | |
| AddError("@binding must be an i32 or u32 value", attr->source); | |
| return nullptr; | |
| } | |
| auto const_value = materialized->ConstantValue(); | |
| auto value = const_value->ValueAs<AInt>(); | |
| if (value < 0) { | |
| AddError("@binding value must be non-negative", attr->source); | |
| return nullptr; | |
| } | |
| binding = u32(value); | |
| } | |
| uint32_t group = 0; | |
| { | |
| ExprEvalStageConstraint constraint{sem::EvaluationStage::kConstant, "@group"}; | |
| TINT_SCOPED_ASSIGNMENT(expr_eval_stage_constraint_, constraint); | |
| auto* attr = ast::GetAttribute<ast::GroupAttribute>(var->attributes); | |
| auto* materialized = Materialize(Expression(attr->expr)); | |
| if (!materialized) { | |
| return nullptr; | |
| } | |
| if (!materialized->Type()->IsAnyOf<type::I32, type::U32>()) { | |
| AddError("@group must be an i32 or u32 value", attr->source); | |
| return nullptr; | |
| } | |
| auto const_value = materialized->ConstantValue(); | |
| auto value = const_value->ValueAs<AInt>(); | |
| if (value < 0) { | |
| AddError("@group value must be non-negative", attr->source); | |
| return nullptr; | |
| } | |
| group = u32(value); | |
| } | |
| binding_point = {group, binding}; | |
| } | |
| std::optional<uint32_t> location; | |
| if (auto* attr = ast::GetAttribute<ast::LocationAttribute>(var->attributes)) { | |
| auto value = LocationAttribute(attr); | |
| if (!value) { | |
| return nullptr; | |
| } | |
| location = value.Get(); | |
| } | |
| sem = builder_->create<sem::GlobalVariable>( | |
| var, var_ty, sem::EvaluationStage::kRuntime, address_space, access, | |
| /* constant_value */ nullptr, binding_point, location); | |
| } else { | |
| sem = builder_->create<sem::LocalVariable>(var, var_ty, sem::EvaluationStage::kRuntime, | |
| address_space, access, current_statement_, | |
| /* constant_value */ nullptr); | |
| } | |
| sem->SetInitializer(rhs); | |
| builder_->Sem().Add(var, sem); | |
| return sem; | |
| } | |
| sem::Parameter* Resolver::Parameter(const ast::Parameter* param, uint32_t index) { | |
| auto add_note = [&] { | |
| AddNote("while instantiating parameter " + builder_->Symbols().NameFor(param->symbol), | |
| param->source); | |
| }; | |
| for (auto* attr : param->attributes) { | |
| Mark(attr); | |
| } | |
| if (!validator_.NoDuplicateAttributes(param->attributes)) { | |
| return nullptr; | |
| } | |
| type::Type* ty = Type(param->type); | |
| if (!ty) { | |
| return nullptr; | |
| } | |
| if (!ApplyAddressSpaceUsageToType(ast::AddressSpace::kNone, ty, param->type->source)) { | |
| add_note(); | |
| return nullptr; | |
| } | |
| if (auto* ptr = ty->As<type::Pointer>()) { | |
| // For MSL, we push module-scope variables into the entry point as pointer | |
| // parameters, so we also need to handle their store type. | |
| if (!ApplyAddressSpaceUsageToType( | |
| ptr->AddressSpace(), const_cast<type::Type*>(ptr->StoreType()), param->source)) { | |
| add_note(); | |
| return nullptr; | |
| } | |
| } | |
| sem::BindingPoint binding_point; | |
| if (param->HasBindingPoint()) { | |
| { | |
| ExprEvalStageConstraint constraint{sem::EvaluationStage::kConstant, "@binding value"}; | |
| TINT_SCOPED_ASSIGNMENT(expr_eval_stage_constraint_, constraint); | |
| auto* attr = ast::GetAttribute<ast::BindingAttribute>(param->attributes); | |
| auto* materialized = Materialize(Expression(attr->expr)); | |
| if (!materialized) { | |
| return nullptr; | |
| } | |
| binding_point.binding = materialized->ConstantValue()->ValueAs<u32>(); | |
| } | |
| { | |
| ExprEvalStageConstraint constraint{sem::EvaluationStage::kConstant, "@group value"}; | |
| TINT_SCOPED_ASSIGNMENT(expr_eval_stage_constraint_, constraint); | |
| auto* attr = ast::GetAttribute<ast::GroupAttribute>(param->attributes); | |
| auto* materialized = Materialize(Expression(attr->expr)); | |
| if (!materialized) { | |
| return nullptr; | |
| } | |
| binding_point.group = materialized->ConstantValue()->ValueAs<u32>(); | |
| } | |
| } | |
| std::optional<uint32_t> location; | |
| if (auto* attr = ast::GetAttribute<ast::LocationAttribute>(param->attributes)) { | |
| auto value = LocationAttribute(attr); | |
| if (!value) { | |
| return nullptr; | |
| } | |
| location = value.Get(); | |
| } | |
| auto* sem = builder_->create<sem::Parameter>( | |
| param, index, ty, ast::AddressSpace::kNone, ast::Access::kUndefined, | |
| sem::ParameterUsage::kNone, binding_point, location); | |
| builder_->Sem().Add(param, sem); | |
| return sem; | |
| } | |
| utils::Result<uint32_t> Resolver::LocationAttribute(const ast::LocationAttribute* attr) { | |
| ExprEvalStageConstraint constraint{sem::EvaluationStage::kConstant, "@location value"}; | |
| TINT_SCOPED_ASSIGNMENT(expr_eval_stage_constraint_, constraint); | |
| auto* materialized = Materialize(Expression(attr->expr)); | |
| if (!materialized) { | |
| return utils::Failure; | |
| } | |
| if (!materialized->Type()->IsAnyOf<type::I32, type::U32>()) { | |
| AddError("@location must be an i32 or u32 value", attr->source); | |
| return utils::Failure; | |
| } | |
| auto const_value = materialized->ConstantValue(); | |
| auto value = const_value->ValueAs<AInt>(); | |
| if (value < 0) { | |
| AddError("@location value must be non-negative", attr->source); | |
| return utils::Failure; | |
| } | |
| return static_cast<uint32_t>(value); | |
| } | |
| ast::Access Resolver::DefaultAccessForAddressSpace(ast::AddressSpace address_space) { | |
| // https://gpuweb.github.io/gpuweb/wgsl/#storage-class | |
| switch (address_space) { | |
| case ast::AddressSpace::kStorage: | |
| case ast::AddressSpace::kUniform: | |
| case ast::AddressSpace::kHandle: | |
| return ast::Access::kRead; | |
| default: | |
| break; | |
| } | |
| return ast::Access::kReadWrite; | |
| } | |
| bool Resolver::AllocateOverridableConstantIds() { | |
| constexpr size_t kLimit = std::numeric_limits<decltype(OverrideId::value)>::max(); | |
| // The next pipeline constant ID to try to allocate. | |
| OverrideId next_id; | |
| bool ids_exhausted = false; | |
| auto increment_next_id = [&] { | |
| if (next_id.value == kLimit) { | |
| ids_exhausted = true; | |
| } else { | |
| next_id.value = next_id.value + 1; | |
| } | |
| }; | |
| // Allocate constant IDs in global declaration order, so that they are | |
| // deterministic. | |
| // TODO(crbug.com/tint/1192): If a transform changes the order or removes an | |
| // unused constant, the allocation may change on the next Resolver pass. | |
| for (auto* decl : builder_->AST().GlobalDeclarations()) { | |
| auto* override = decl->As<ast::Override>(); | |
| if (!override) { | |
| continue; | |
| } | |
| OverrideId id; | |
| if (ast::HasAttribute<ast::IdAttribute>(override->attributes)) { | |
| id = builder_->Sem().Get<sem::GlobalVariable>(override)->OverrideId(); | |
| } else { | |
| // No ID was specified, so allocate the next available ID. | |
| while (!ids_exhausted && override_ids_.Contains(next_id)) { | |
| increment_next_id(); | |
| } | |
| if (ids_exhausted) { | |
| AddError( | |
| "number of 'override' variables exceeded limit of " + std::to_string(kLimit), | |
| decl->source); | |
| return false; | |
| } | |
| id = next_id; | |
| increment_next_id(); | |
| } | |
| auto* sem = sem_.Get<sem::GlobalVariable>(override); | |
| const_cast<sem::GlobalVariable*>(sem)->SetOverrideId(id); | |
| } | |
| return true; | |
| } | |
| void Resolver::SetShadows() { | |
| for (auto it : dependencies_.shadows) { | |
| CastableBase* b = sem_.Get(it.value); | |
| if (!b) { | |
| TINT_ICE(Resolver, builder_->Diagnostics()) | |
| << "AST node '" << it.value->TypeInfo().name << "' had no semantic info\n" | |
| << "At: " << it.value->source << "\n" | |
| << "Pointer: " << it.value; | |
| } | |
| Switch( | |
| sem_.Get(it.key), // | |
| [&](sem::LocalVariable* local) { local->SetShadows(b); }, | |
| [&](sem::Parameter* param) { param->SetShadows(b); }); | |
| } | |
| } | |
| sem::GlobalVariable* Resolver::GlobalVariable(const ast::Variable* v) { | |
| utils::UniqueVector<const sem::GlobalVariable*, 4> transitively_referenced_overrides; | |
| TINT_SCOPED_ASSIGNMENT(resolved_overrides_, &transitively_referenced_overrides); | |
| auto* sem = As<sem::GlobalVariable>(Variable(v, /* is_global */ true)); | |
| if (!sem) { | |
| return nullptr; | |
| } | |
| for (auto* attr : v->attributes) { | |
| Mark(attr); | |
| } | |
| if (!validator_.NoDuplicateAttributes(v->attributes)) { | |
| return nullptr; | |
| } | |
| if (!validator_.GlobalVariable(sem, override_ids_)) { | |
| return nullptr; | |
| } | |
| // Track the pipeline-overridable constants that are transitively referenced by this variable. | |
| for (auto* var : transitively_referenced_overrides) { | |
| builder_->Sem().AddTransitivelyReferencedOverride(sem, var); | |
| } | |
| if (auto* arr = sem->Type()->UnwrapRef()->As<type::Array>()) { | |
| auto* refs = builder_->Sem().TransitivelyReferencedOverrides(arr); | |
| if (refs) { | |
| for (auto* var : *refs) { | |
| builder_->Sem().AddTransitivelyReferencedOverride(sem, var); | |
| } | |
| } | |
| } | |
| return sem; | |
| } | |
| sem::Statement* Resolver::StaticAssert(const ast::StaticAssert* assertion) { | |
| ExprEvalStageConstraint constraint{sem::EvaluationStage::kConstant, "static assertion"}; | |
| TINT_SCOPED_ASSIGNMENT(expr_eval_stage_constraint_, constraint); | |
| auto* expr = Expression(assertion->condition); | |
| if (!expr) { | |
| return nullptr; | |
| } | |
| auto* cond = expr->ConstantValue(); | |
| if (auto* ty = cond->Type(); !ty->Is<type::Bool>()) { | |
| AddError( | |
| "static assertion condition must be a bool, got '" + builder_->FriendlyName(ty) + "'", | |
| assertion->condition->source); | |
| return nullptr; | |
| } | |
| if (!cond->ValueAs<bool>()) { | |
| AddError("static assertion failed", assertion->source); | |
| return nullptr; | |
| } | |
| auto* sem = | |
| builder_->create<sem::Statement>(assertion, current_compound_statement_, current_function_); | |
| builder_->Sem().Add(assertion, sem); | |
| return sem; | |
| } | |
| sem::Function* Resolver::Function(const ast::Function* decl) { | |
| uint32_t parameter_index = 0; | |
| utils::Hashmap<Symbol, Source, 8> parameter_names; | |
| utils::Vector<sem::Parameter*, 8> parameters; | |
| // Resolve all the parameters | |
| for (auto* param : decl->params) { | |
| Mark(param); | |
| { // Check the parameter name is unique for the function | |
| if (auto added = parameter_names.Add(param->symbol, param->source); !added) { | |
| auto name = builder_->Symbols().NameFor(param->symbol); | |
| AddError("redefinition of parameter '" + name + "'", param->source); | |
| AddNote("previous definition is here", *added.value); | |
| return nullptr; | |
| } | |
| } | |
| auto* p = Parameter(param, parameter_index++); | |
| if (!p) { | |
| return nullptr; | |
| } | |
| if (!validator_.Parameter(decl, p)) { | |
| return nullptr; | |
| } | |
| parameters.Push(p); | |
| auto* p_ty = const_cast<type::Type*>(p->Type()); | |
| if (auto* str = p_ty->As<sem::Struct>()) { | |
| switch (decl->PipelineStage()) { | |
| case ast::PipelineStage::kVertex: | |
| str->AddUsage(type::PipelineStageUsage::kVertexInput); | |
| break; | |
| case ast::PipelineStage::kFragment: | |
| str->AddUsage(type::PipelineStageUsage::kFragmentInput); | |
| break; | |
| case ast::PipelineStage::kCompute: | |
| str->AddUsage(type::PipelineStageUsage::kComputeInput); | |
| break; | |
| case ast::PipelineStage::kNone: | |
| break; | |
| } | |
| } | |
| } | |
| // Resolve the return type | |
| type::Type* return_type = nullptr; | |
| if (auto* ty = decl->return_type) { | |
| return_type = Type(ty); | |
| if (!return_type) { | |
| return nullptr; | |
| } | |
| } else { | |
| return_type = builder_->create<type::Void>(); | |
| } | |
| // Determine if the return type has a location | |
| std::optional<uint32_t> return_location; | |
| for (auto* attr : decl->return_type_attributes) { | |
| Mark(attr); | |
| if (auto* loc_attr = attr->As<ast::LocationAttribute>()) { | |
| auto value = LocationAttribute(loc_attr); | |
| if (!value) { | |
| return nullptr; | |
| } | |
| return_location = value.Get(); | |
| } | |
| } | |
| if (!validator_.NoDuplicateAttributes(decl->attributes)) { | |
| return nullptr; | |
| } | |
| if (auto* str = return_type->As<sem::Struct>()) { | |
| if (!ApplyAddressSpaceUsageToType(ast::AddressSpace::kNone, str, decl->source)) { | |
| AddNote( | |
| "while instantiating return type for " + builder_->Symbols().NameFor(decl->symbol), | |
| decl->source); | |
| return nullptr; | |
| } | |
| switch (decl->PipelineStage()) { | |
| case ast::PipelineStage::kVertex: | |
| str->AddUsage(type::PipelineStageUsage::kVertexOutput); | |
| break; | |
| case ast::PipelineStage::kFragment: | |
| str->AddUsage(type::PipelineStageUsage::kFragmentOutput); | |
| break; | |
| case ast::PipelineStage::kCompute: | |
| str->AddUsage(type::PipelineStageUsage::kComputeOutput); | |
| break; | |
| case ast::PipelineStage::kNone: | |
| break; | |
| } | |
| } | |
| auto* func = | |
| builder_->create<sem::Function>(decl, return_type, return_location, std::move(parameters)); | |
| builder_->Sem().Add(decl, func); | |
| TINT_SCOPED_ASSIGNMENT(current_function_, func); | |
| if (!WorkgroupSize(decl)) { | |
| return nullptr; | |
| } | |
| if (decl->IsEntryPoint()) { | |
| entry_points_.Push(func); | |
| } | |
| if (decl->body) { | |
| Mark(decl->body); | |
| if (current_compound_statement_) { | |
| TINT_ICE(Resolver, diagnostics_) | |
| << "Resolver::Function() called with a current compound statement"; | |
| return nullptr; | |
| } | |
| auto* body = StatementScope(decl->body, builder_->create<sem::FunctionBlockStatement>(func), | |
| [&] { return Statements(decl->body->statements); }); | |
| if (!body) { | |
| return nullptr; | |
| } | |
| func->Behaviors() = body->Behaviors(); | |
| if (func->Behaviors().Contains(sem::Behavior::kReturn)) { | |
| // https://www.w3.org/TR/WGSL/#behaviors-rules | |
| // We assign a behavior to each function: it is its body’s behavior | |
| // (treating the body as a regular statement), with any "Return" replaced | |
| // by "Next". | |
| func->Behaviors().Remove(sem::Behavior::kReturn); | |
| func->Behaviors().Add(sem::Behavior::kNext); | |
| } | |
| } | |
| for (auto* attr : decl->attributes) { | |
| Mark(attr); | |
| } | |
| if (!validator_.NoDuplicateAttributes(decl->return_type_attributes)) { | |
| return nullptr; | |
| } | |
| auto stage = current_function_ ? current_function_->Declaration()->PipelineStage() | |
| : ast::PipelineStage::kNone; | |
| if (!validator_.Function(func, stage)) { | |
| return nullptr; | |
| } | |
| // If this is an entry point, mark all transitively called functions as being | |
| // used by this entry point. | |
| if (decl->IsEntryPoint()) { | |
| for (auto* f : func->TransitivelyCalledFunctions()) { | |
| const_cast<sem::Function*>(f)->AddAncestorEntryPoint(func); | |
| } | |
| } | |
| return func; | |
| } | |
| bool Resolver::WorkgroupSize(const ast::Function* func) { | |
| // Set work-group size defaults. | |
| sem::WorkgroupSize ws; | |
| for (size_t i = 0; i < 3; i++) { | |
| ws[i] = 1; | |
| } | |
| auto* attr = ast::GetAttribute<ast::WorkgroupAttribute>(func->attributes); | |
| if (!attr) { | |
| return true; | |
| } | |
| auto values = attr->Values(); | |
| utils::Vector<const sem::Expression*, 3> args; | |
| utils::Vector<const type::Type*, 3> arg_tys; | |
| constexpr const char* kErrBadExpr = | |
| "workgroup_size argument must be a constant or override-expression of type " | |
| "abstract-integer, i32 or u32"; | |
| for (size_t i = 0; i < 3; i++) { | |
| // Each argument to this attribute can either be a literal, an identifier for a module-scope | |
| // constants, a const-expression, or nullptr if not specified. | |
| auto* value = values[i]; | |
| if (!value) { | |
| break; | |
| } | |
| const auto* expr = Expression(value); | |
| if (!expr) { | |
| return false; | |
| } | |
| auto* ty = expr->Type(); | |
| if (!ty->IsAnyOf<type::I32, type::U32, type::AbstractInt>()) { | |
| AddError(kErrBadExpr, value->source); | |
| return false; | |
| } | |
| if (expr->Stage() != sem::EvaluationStage::kConstant && | |
| expr->Stage() != sem::EvaluationStage::kOverride) { | |
| AddError(kErrBadExpr, value->source); | |
| return false; | |
| } | |
| args.Push(expr); | |
| arg_tys.Push(ty); | |
| } | |
| auto* common_ty = type::Type::Common(arg_tys); | |
| if (!common_ty) { | |
| AddError("workgroup_size arguments must be of the same type, either i32 or u32", | |
| attr->source); | |
| return false; | |
| } | |
| // If all arguments are abstract-integers, then materialize to i32. | |
| if (common_ty->Is<type::AbstractInt>()) { | |
| common_ty = builder_->create<type::I32>(); | |
| } | |
| for (size_t i = 0; i < args.Length(); i++) { | |
| auto* materialized = Materialize(args[i], common_ty); | |
| if (!materialized) { | |
| return false; | |
| } | |
| if (auto* value = materialized->ConstantValue()) { | |
| if (value->ValueAs<AInt>() < 1) { | |
| AddError("workgroup_size argument must be at least 1", values[i]->source); | |
| return false; | |
| } | |
| ws[i] = value->ValueAs<u32>(); | |
| } else { | |
| ws[i] = std::nullopt; | |
| } | |
| } | |
| uint64_t total_size = static_cast<uint64_t>(ws[0].value_or(1)); | |
| for (size_t i = 1; i < 3; i++) { | |
| total_size *= static_cast<uint64_t>(ws[i].value_or(1)); | |
| if (total_size > 0xffffffff) { | |
| AddError("total workgroup grid size cannot exceed 0xffffffff", values[i]->source); | |
| return false; | |
| } | |
| } | |
| current_function_->SetWorkgroupSize(std::move(ws)); | |
| return true; | |
| } | |
| bool Resolver::Statements(utils::VectorRef<const ast::Statement*> stmts) { | |
| sem::Behaviors behaviors{sem::Behavior::kNext}; | |
| bool reachable = true; | |
| for (auto* stmt : stmts) { | |
| Mark(stmt); | |
| auto* sem = Statement(stmt); | |
| if (!sem) { | |
| return false; | |
| } | |
| // s1 s2:(B1∖{Next}) ∪ B2 | |
| sem->SetIsReachable(reachable); | |
| if (reachable) { | |
| behaviors = (behaviors - sem::Behavior::kNext) + sem->Behaviors(); | |
| } | |
| reachable = reachable && sem->Behaviors().Contains(sem::Behavior::kNext); | |
| } | |
| current_statement_->Behaviors() = behaviors; | |
| if (!validator_.Statements(stmts)) { | |
| return false; | |
| } | |
| return true; | |
| } | |
| sem::Statement* Resolver::Statement(const ast::Statement* stmt) { | |
| return Switch( | |
| stmt, | |
| // Compound statements. These create their own sem::CompoundStatement | |
| // bindings. | |
| [&](const ast::BlockStatement* b) { return BlockStatement(b); }, | |
| [&](const ast::ForLoopStatement* l) { return ForLoopStatement(l); }, | |
| [&](const ast::LoopStatement* l) { return LoopStatement(l); }, | |
| [&](const ast::WhileStatement* w) { return WhileStatement(w); }, | |
| [&](const ast::IfStatement* i) { return IfStatement(i); }, | |
| [&](const ast::SwitchStatement* s) { return SwitchStatement(s); }, | |
| // Non-Compound statements | |
| [&](const ast::AssignmentStatement* a) { return AssignmentStatement(a); }, | |
| [&](const ast::BreakStatement* b) { return BreakStatement(b); }, | |
| [&](const ast::BreakIfStatement* b) { return BreakIfStatement(b); }, | |
| [&](const ast::CallStatement* c) { return CallStatement(c); }, | |
| [&](const ast::CompoundAssignmentStatement* c) { return CompoundAssignmentStatement(c); }, | |
| [&](const ast::ContinueStatement* c) { return ContinueStatement(c); }, | |
| [&](const ast::DiscardStatement* d) { return DiscardStatement(d); }, | |
| [&](const ast::IncrementDecrementStatement* i) { return IncrementDecrementStatement(i); }, | |
| [&](const ast::ReturnStatement* r) { return ReturnStatement(r); }, | |
| [&](const ast::VariableDeclStatement* v) { return VariableDeclStatement(v); }, | |
| [&](const ast::StaticAssert* sa) { return StaticAssert(sa); }, | |
| // Error cases | |
| [&](const ast::CaseStatement*) { | |
| AddError("case statement can only be used inside a switch statement", stmt->source); | |
| return nullptr; | |
| }, | |
| [&](Default) { | |
| AddError("unknown statement type: " + std::string(stmt->TypeInfo().name), stmt->source); | |
| return nullptr; | |
| }); | |
| } | |
| sem::CaseStatement* Resolver::CaseStatement(const ast::CaseStatement* stmt, const type::Type* ty) { | |
| auto* sem = | |
| builder_->create<sem::CaseStatement>(stmt, current_compound_statement_, current_function_); | |
| return StatementScope(stmt, sem, [&] { | |
| sem->Selectors().reserve(stmt->selectors.Length()); | |
| for (auto* sel : stmt->selectors) { | |
| Mark(sel); | |
| ExprEvalStageConstraint constraint{sem::EvaluationStage::kConstant, "case selector"}; | |
| TINT_SCOPED_ASSIGNMENT(expr_eval_stage_constraint_, constraint); | |
| const constant::Value* const_value = nullptr; | |
| if (!sel->IsDefault()) { | |
| // The sem statement was created in the switch when attempting to determine the | |
| // common type. | |
| auto* materialized = Materialize(sem_.Get(sel->expr), ty); | |
| if (!materialized) { | |
| return false; | |
| } | |
| if (!materialized->Type()->IsAnyOf<type::I32, type::U32>()) { | |
| AddError("case selector must be an i32 or u32 value", sel->source); | |
| return false; | |
| } | |
| const_value = materialized->ConstantValue(); | |
| if (!const_value) { | |
| AddError("case selector must be a constant expression", sel->source); | |
| return false; | |
| } | |
| } | |
| sem->Selectors().emplace_back(builder_->create<sem::CaseSelector>(sel, const_value)); | |
| } | |
| Mark(stmt->body); | |
| auto* body = BlockStatement(stmt->body); | |
| if (!body) { | |
| return false; | |
| } | |
| sem->SetBlock(body); | |
| sem->Behaviors() = body->Behaviors(); | |
| return true; | |
| }); | |
| } | |
| sem::IfStatement* Resolver::IfStatement(const ast::IfStatement* stmt) { | |
| auto* sem = | |
| builder_->create<sem::IfStatement>(stmt, current_compound_statement_, current_function_); | |
| return StatementScope(stmt, sem, [&] { | |
| auto* cond = Load(Expression(stmt->condition)); | |
| if (!cond) { | |
| return false; | |
| } | |
| sem->SetCondition(cond); | |
| sem->Behaviors() = cond->Behaviors(); | |
| sem->Behaviors().Remove(sem::Behavior::kNext); | |
| Mark(stmt->body); | |
| auto* body = builder_->create<sem::BlockStatement>(stmt->body, current_compound_statement_, | |
| current_function_); | |
| if (!StatementScope(stmt->body, body, [&] { return Statements(stmt->body->statements); })) { | |
| return false; | |
| } | |
| sem->Behaviors().Add(body->Behaviors()); | |
| if (stmt->else_statement) { | |
| Mark(stmt->else_statement); | |
| auto* else_sem = Statement(stmt->else_statement); | |
| if (!else_sem) { | |
| return false; | |
| } | |
| sem->Behaviors().Add(else_sem->Behaviors()); | |
| } else { | |
| // https://www.w3.org/TR/WGSL/#behaviors-rules | |
| // if statements without an else branch are treated as if they had an | |
| // empty else branch (which adds Next to their behavior) | |
| sem->Behaviors().Add(sem::Behavior::kNext); | |
| } | |
| return validator_.IfStatement(sem); | |
| }); | |
| } | |
| sem::BlockStatement* Resolver::BlockStatement(const ast::BlockStatement* stmt) { | |
| auto* sem = builder_->create<sem::BlockStatement>( | |
| stmt->As<ast::BlockStatement>(), current_compound_statement_, current_function_); | |
| return StatementScope(stmt, sem, [&] { return Statements(stmt->statements); }); | |
| } | |
| sem::LoopStatement* Resolver::LoopStatement(const ast::LoopStatement* stmt) { | |
| auto* sem = | |
| builder_->create<sem::LoopStatement>(stmt, current_compound_statement_, current_function_); | |
| return StatementScope(stmt, sem, [&] { | |
| Mark(stmt->body); | |
| auto* body = builder_->create<sem::LoopBlockStatement>( | |
| stmt->body, current_compound_statement_, current_function_); | |
| return StatementScope(stmt->body, body, [&] { | |
| if (!Statements(stmt->body->statements)) { | |
| return false; | |
| } | |
| auto& behaviors = sem->Behaviors(); | |
| behaviors = body->Behaviors(); | |
| if (stmt->continuing) { | |
| Mark(stmt->continuing); | |
| auto* continuing = StatementScope( | |
| stmt->continuing, | |
| builder_->create<sem::LoopContinuingBlockStatement>( | |
| stmt->continuing, current_compound_statement_, current_function_), | |
| [&] { return Statements(stmt->continuing->statements); }); | |
| if (!continuing) { | |
| return false; | |
| } | |
| behaviors.Add(continuing->Behaviors()); | |
| } | |
| if (behaviors.Contains(sem::Behavior::kBreak)) { // Does the loop exit? | |
| behaviors.Add(sem::Behavior::kNext); | |
| } else { | |
| behaviors.Remove(sem::Behavior::kNext); | |
| } | |
| behaviors.Remove(sem::Behavior::kBreak, sem::Behavior::kContinue); | |
| return validator_.LoopStatement(sem); | |
| }); | |
| }); | |
| } | |
| sem::ForLoopStatement* Resolver::ForLoopStatement(const ast::ForLoopStatement* stmt) { | |
| auto* sem = builder_->create<sem::ForLoopStatement>(stmt, current_compound_statement_, | |
| current_function_); | |
| return StatementScope(stmt, sem, [&] { | |
| auto& behaviors = sem->Behaviors(); | |
| if (auto* initializer = stmt->initializer) { | |
| Mark(initializer); | |
| auto* init = Statement(initializer); | |
| if (!init) { | |
| return false; | |
| } | |
| behaviors.Add(init->Behaviors()); | |
| } | |
| if (auto* cond_expr = stmt->condition) { | |
| auto* cond = Load(Expression(cond_expr)); | |
| if (!cond) { | |
| return false; | |
| } | |
| sem->SetCondition(cond); | |
| behaviors.Add(cond->Behaviors()); | |
| } | |
| if (auto* continuing = stmt->continuing) { | |
| Mark(continuing); | |
| auto* cont = Statement(continuing); | |
| if (!cont) { | |
| return false; | |
| } | |
| behaviors.Add(cont->Behaviors()); | |
| } | |
| Mark(stmt->body); | |
| auto* body = builder_->create<sem::LoopBlockStatement>( | |
| stmt->body, current_compound_statement_, current_function_); | |
| if (!StatementScope(stmt->body, body, [&] { return Statements(stmt->body->statements); })) { | |
| return false; | |
| } | |
| behaviors.Add(body->Behaviors()); | |
| if (stmt->condition || behaviors.Contains(sem::Behavior::kBreak)) { // Does the loop exit? | |
| behaviors.Add(sem::Behavior::kNext); | |
| } else { | |
| behaviors.Remove(sem::Behavior::kNext); | |
| } | |
| behaviors.Remove(sem::Behavior::kBreak, sem::Behavior::kContinue); | |
| return validator_.ForLoopStatement(sem); | |
| }); | |
| } | |
| sem::WhileStatement* Resolver::WhileStatement(const ast::WhileStatement* stmt) { | |
| auto* sem = | |
| builder_->create<sem::WhileStatement>(stmt, current_compound_statement_, current_function_); | |
| return StatementScope(stmt, sem, [&] { | |
| auto& behaviors = sem->Behaviors(); | |
| auto* cond = Load(Expression(stmt->condition)); | |
| if (!cond) { | |
| return false; | |
| } | |
| sem->SetCondition(cond); | |
| behaviors.Add(cond->Behaviors()); | |
| Mark(stmt->body); | |
| auto* body = builder_->create<sem::LoopBlockStatement>( | |
| stmt->body, current_compound_statement_, current_function_); | |
| if (!StatementScope(stmt->body, body, [&] { return Statements(stmt->body->statements); })) { | |
| return false; | |
| } | |
| behaviors.Add(body->Behaviors()); | |
| // Always consider the while as having a 'next' behaviour because it has | |
| // a condition. We don't check if the condition will terminate but it isn't | |
| // valid to have an infinite loop in a WGSL program, so a non-terminating | |
| // condition is already an invalid program. | |
| behaviors.Add(sem::Behavior::kNext); | |
| behaviors.Remove(sem::Behavior::kBreak, sem::Behavior::kContinue); | |
| return validator_.WhileStatement(sem); | |
| }); | |
| } | |
| sem::Expression* Resolver::Expression(const ast::Expression* root) { | |
| utils::Vector<const ast::Expression*, 64> sorted; | |
| constexpr size_t kMaxExpressionDepth = 512U; | |
| bool failed = false; | |
| if (!ast::TraverseExpressions<ast::TraverseOrder::RightToLeft>( | |
| root, diagnostics_, [&](const ast::Expression* expr, size_t depth) { | |
| if (depth > kMaxExpressionDepth) { | |
| AddError( | |
| "reached max expression depth of " + std::to_string(kMaxExpressionDepth), | |
| expr->source); | |
| failed = true; | |
| return ast::TraverseAction::Stop; | |
| } | |
| if (!Mark(expr)) { | |
| failed = true; | |
| return ast::TraverseAction::Stop; | |
| } | |
| if (auto* binary = expr->As<ast::BinaryExpression>(); | |
| binary && binary->IsLogical()) { | |
| // Store potential const-eval short-circuit pair | |
| logical_binary_lhs_to_parent_.Add(binary->lhs, binary); | |
| } | |
| sorted.Push(expr); | |
| return ast::TraverseAction::Descend; | |
| })) { | |
| return nullptr; | |
| } | |
| if (failed) { | |
| return nullptr; | |
| } | |
| for (auto* expr : utils::Reverse(sorted)) { | |
| auto* sem_expr = Switch( | |
| expr, | |
| [&](const ast::IndexAccessorExpression* array) -> sem::Expression* { | |
| return IndexAccessor(array); | |
| }, | |
| [&](const ast::BinaryExpression* bin_op) -> sem::Expression* { return Binary(bin_op); }, | |
| [&](const ast::BitcastExpression* bitcast) -> sem::Expression* { | |
| return Bitcast(bitcast); | |
| }, | |
| [&](const ast::CallExpression* call) -> sem::Expression* { return Call(call); }, | |
| [&](const ast::IdentifierExpression* ident) -> sem::Expression* { | |
| return Identifier(ident); | |
| }, | |
| [&](const ast::LiteralExpression* literal) -> sem::Expression* { | |
| return Literal(literal); | |
| }, | |
| [&](const ast::MemberAccessorExpression* member) -> sem::Expression* { | |
| return MemberAccessor(member); | |
| }, | |
| [&](const ast::UnaryOpExpression* unary) -> sem::Expression* { return UnaryOp(unary); }, | |
| [&](const ast::PhonyExpression*) -> sem::Expression* { | |
| return builder_->create<sem::Expression>(expr, builder_->create<type::Void>(), | |
| sem::EvaluationStage::kRuntime, | |
| current_statement_, | |
| /* constant_value */ nullptr, | |
| /* has_side_effects */ false); | |
| }, | |
| [&](Default) { | |
| TINT_ICE(Resolver, diagnostics_) | |
| << "unhandled expression type: " << expr->TypeInfo().name; | |
| return nullptr; | |
| }); | |
| if (!sem_expr) { | |
| return nullptr; | |
| } | |
| if (auto* constraint = expr_eval_stage_constraint_.constraint) { | |
| if (!validator_.EvaluationStage(sem_expr, expr_eval_stage_constraint_.stage, | |
| constraint)) { | |
| return nullptr; | |
| } | |
| } | |
| builder_->Sem().Add(expr, sem_expr); | |
| if (expr == root) { | |
| return sem_expr; | |
| } | |
| // If we just processed the lhs of a constexpr logical binary expression, mark the rhs for | |
| // short-circuiting. | |
| if (sem_expr->ConstantValue()) { | |
| if (auto binary = logical_binary_lhs_to_parent_.Find(expr)) { | |
| const bool lhs_is_true = sem_expr->ConstantValue()->ValueAs<bool>(); | |
| if (((*binary)->IsLogicalAnd() && !lhs_is_true) || | |
| ((*binary)->IsLogicalOr() && lhs_is_true)) { | |
| // Mark entire expression tree to not const-evaluate | |
| auto r = ast::TraverseExpressions( // | |
| (*binary)->rhs, diagnostics_, [&](const ast::Expression* e) { | |
| skip_const_eval_.Add(e); | |
| return ast::TraverseAction::Descend; | |
| }); | |
| if (!r) { | |
| return nullptr; | |
| } | |
| } | |
| } | |
| } | |
| } | |
| TINT_ICE(Resolver, diagnostics_) << "Expression() did not find root node"; | |
| return nullptr; | |
| } | |
| void Resolver::RegisterStore(const sem::Expression* expr) { | |
| auto& info = alias_analysis_infos_[current_function_]; | |
| Switch( | |
| expr->RootIdentifier(), | |
| [&](const sem::GlobalVariable* global) { | |
| info.module_scope_writes.insert({global, expr}); | |
| }, | |
| [&](const sem::Parameter* param) { info.parameter_writes.insert(param); }); | |
| } | |
| bool Resolver::AliasAnalysis(const sem::Call* call) { | |
| auto* target = call->Target()->As<sem::Function>(); | |
| if (!target) { | |
| return true; | |
| } | |
| if (validator_.IsValidationDisabled(target->Declaration()->attributes, | |
| ast::DisabledValidation::kIgnorePointerAliasing)) { | |
| return true; | |
| } | |
| // Helper to generate an aliasing error diagnostic. | |
| struct Alias { | |
| const sem::Expression* expr; // the "other expression" | |
| enum { Argument, ModuleScope } type; // the type of the "other" expression | |
| std::string access; // the access performed for the "other" expression | |
| }; | |
| auto make_error = [&](const sem::Expression* arg, Alias&& var) { | |
| // TODO(crbug.com/tint/1675): Switch to error and return false after deprecation period. | |
| AddWarning("invalid aliased pointer argument", arg->Declaration()->source); | |
| switch (var.type) { | |
| case Alias::Argument: | |
| AddNote("aliases with another argument passed here", | |
| var.expr->Declaration()->source); | |
| break; | |
| case Alias::ModuleScope: { | |
| auto* func = var.expr->Stmt()->Function(); | |
| auto func_name = builder_->Symbols().NameFor(func->Declaration()->symbol); | |
| AddNote( | |
| "aliases with module-scope variable " + var.access + " in '" + func_name + "'", | |
| var.expr->Declaration()->source); | |
| break; | |
| } | |
| } | |
| return true; | |
| }; | |
| auto& args = call->Arguments(); | |
| auto& target_info = alias_analysis_infos_[target]; | |
| auto& caller_info = alias_analysis_infos_[current_function_]; | |
| // Track the set of root identifiers that are read and written by arguments passed in this call. | |
| std::unordered_map<const sem::Variable*, const sem::Expression*> arg_reads; | |
| std::unordered_map<const sem::Variable*, const sem::Expression*> arg_writes; | |
| for (size_t i = 0; i < args.Length(); i++) { | |
| auto* arg = args[i]; | |
| if (!arg->Type()->Is<type::Pointer>()) { | |
| continue; | |
| } | |
| auto* root = arg->RootIdentifier(); | |
| if (target_info.parameter_writes.count(target->Parameters()[i])) { | |
| // Arguments that are written to can alias with any other argument or module-scope | |
| // variable access. | |
| if (arg_writes.count(root)) { | |
| return make_error(arg, {arg_writes.at(root), Alias::Argument, "write"}); | |
| } | |
| if (arg_reads.count(root)) { | |
| return make_error(arg, {arg_reads.at(root), Alias::Argument, "read"}); | |
| } | |
| if (target_info.module_scope_reads.count(root)) { | |
| return make_error( | |
| arg, {target_info.module_scope_reads.at(root), Alias::ModuleScope, "read"}); | |
| } | |
| if (target_info.module_scope_writes.count(root)) { | |
| return make_error( | |
| arg, {target_info.module_scope_writes.at(root), Alias::ModuleScope, "write"}); | |
| } | |
| arg_writes.insert({root, arg}); | |
| // Propagate the write access to the caller. | |
| Switch( | |
| root, | |
| [&](const sem::GlobalVariable* global) { | |
| caller_info.module_scope_writes.insert({global, arg}); | |
| }, | |
| [&](const sem::Parameter* param) { caller_info.parameter_writes.insert(param); }); | |
| } else if (target_info.parameter_reads.count(target->Parameters()[i])) { | |
| // Arguments that are read from can alias with arguments or module-scope variables that | |
| // are written to. | |
| if (arg_writes.count(root)) { | |
| return make_error(arg, {arg_writes.at(root), Alias::Argument, "write"}); | |
| } | |
| if (target_info.module_scope_writes.count(root)) { | |
| return make_error( | |
| arg, {target_info.module_scope_writes.at(root), Alias::ModuleScope, "write"}); | |
| } | |
| arg_reads.insert({root, arg}); | |
| // Propagate the read access to the caller. | |
| Switch( | |
| root, | |
| [&](const sem::GlobalVariable* global) { | |
| caller_info.module_scope_reads.insert({global, arg}); | |
| }, | |
| [&](const sem::Parameter* param) { caller_info.parameter_reads.insert(param); }); | |
| } | |
| } | |
| // Propagate module-scope variable uses to the caller. | |
| for (auto read : target_info.module_scope_reads) { | |
| caller_info.module_scope_reads.insert({read.first, read.second}); | |
| } | |
| for (auto write : target_info.module_scope_writes) { | |
| caller_info.module_scope_writes.insert({write.first, write.second}); | |
| } | |
| return true; | |
| } | |
| const type::Type* Resolver::ConcreteType(const type::Type* ty, | |
| const type::Type* target_ty, | |
| const Source& source) { | |
| auto i32 = [&] { return builder_->create<type::I32>(); }; | |
| auto f32 = [&] { return builder_->create<type::F32>(); }; | |
| auto i32v = [&](uint32_t width) { return builder_->create<type::Vector>(i32(), width); }; | |
| auto f32v = [&](uint32_t width) { return builder_->create<type::Vector>(f32(), width); }; | |
| auto f32m = [&](uint32_t columns, uint32_t rows) { | |
| return builder_->create<type::Matrix>(f32v(rows), columns); | |
| }; | |
| return Switch( | |
| ty, // | |
| [&](const type::AbstractInt*) { return target_ty ? target_ty : i32(); }, | |
| [&](const type::AbstractFloat*) { return target_ty ? target_ty : f32(); }, | |
| [&](const type::Vector* v) { | |
| return Switch( | |
| v->type(), // | |
| [&](const type::AbstractInt*) { return target_ty ? target_ty : i32v(v->Width()); }, | |
| [&](const type::AbstractFloat*) { | |
| return target_ty ? target_ty : f32v(v->Width()); | |
| }); | |
| }, | |
| [&](const type::Matrix* m) { | |
| return Switch(m->type(), // | |
| [&](const type::AbstractFloat*) { | |
| return target_ty ? target_ty : f32m(m->columns(), m->rows()); | |
| }); | |
| }, | |
| [&](const type::Array* a) -> const type::Type* { | |
| const type::Type* target_el_ty = nullptr; | |
| if (auto* target_arr_ty = As<type::Array>(target_ty)) { | |
| target_el_ty = target_arr_ty->ElemType(); | |
| } | |
| if (auto* el_ty = ConcreteType(a->ElemType(), target_el_ty, source)) { | |
| return Array(source, source, el_ty, a->Count(), /* explicit_stride */ 0); | |
| } | |
| return nullptr; | |
| }, | |
| [&](const sem::Struct* s) -> const type::Type* { | |
| if (auto tys = s->ConcreteTypes(); !tys.IsEmpty()) { | |
| return target_ty ? target_ty : tys[0]; | |
| } | |
| return nullptr; | |
| }); | |
| } | |
| const sem::Expression* Resolver::Load(const sem::Expression* expr) { | |
| if (!expr) { | |
| // Allow for Load(Expression(blah)), where failures pass through Load() | |
| return nullptr; | |
| } | |
| if (!expr->Type()->Is<type::Reference>()) { | |
| // Expression is not a reference type, so cannot be loaded. Just return expr. | |
| return expr; | |
| } | |
| auto* load = builder_->create<sem::Load>(expr, current_statement_); | |
| load->Behaviors() = expr->Behaviors(); | |
| builder_->Sem().Replace(expr->Declaration(), load); | |
| // Track the load for the alias analysis. | |
| auto& alias_info = alias_analysis_infos_[current_function_]; | |
| Switch( | |
| expr->RootIdentifier(), | |
| [&](const sem::GlobalVariable* global) { | |
| alias_info.module_scope_reads.insert({global, expr}); | |
| }, | |
| [&](const sem::Parameter* param) { alias_info.parameter_reads.insert(param); }); | |
| return load; | |
| } | |
| const sem::Expression* Resolver::Materialize(const sem::Expression* expr, | |
| const type::Type* target_type /* = nullptr */) { | |
| if (!expr) { | |
| // Allow for Materialize(Expression(blah)), where failures pass through Materialize() | |
| return nullptr; | |
| } | |
| auto* decl = expr->Declaration(); | |
| auto* concrete_ty = ConcreteType(expr->Type(), target_type, decl->source); | |
| if (!concrete_ty) { | |
| return expr; // Does not require materialization | |
| } | |
| auto* src_ty = expr->Type(); | |
| if (!validator_.Materialize(concrete_ty, src_ty, decl->source)) { | |
| return nullptr; | |
| } | |
| const constant::Value* materialized_val = nullptr; | |
| if (!skip_const_eval_.Contains(decl)) { | |
| auto expr_val = expr->ConstantValue(); | |
| if (!expr_val) { | |
| TINT_ICE(Resolver, builder_->Diagnostics()) | |
| << decl->source << "Materialize(" << decl->TypeInfo().name | |
| << ") called on expression with no constant value"; | |
| return nullptr; | |
| } | |
| auto val = const_eval_.Convert(concrete_ty, expr_val, decl->source); | |
| if (!val) { | |
| // Convert() has already failed and raised an diagnostic error. | |
| return nullptr; | |
| } | |
| materialized_val = val.Get(); | |
| if (!materialized_val) { | |
| TINT_ICE(Resolver, builder_->Diagnostics()) | |
| << decl->source << "ConvertValue(" << builder_->FriendlyName(expr_val->Type()) | |
| << " -> " << builder_->FriendlyName(concrete_ty) << ") returned invalid value"; | |
| return nullptr; | |
| } | |
| } | |
| auto* m = | |
| builder_->create<sem::Materialize>(expr, current_statement_, concrete_ty, materialized_val); | |
| m->Behaviors() = expr->Behaviors(); | |
| builder_->Sem().Replace(decl, m); | |
| return m; | |
| } | |
| template <size_t N> | |
| bool Resolver::MaybeMaterializeAndLoadArguments(utils::Vector<const sem::Expression*, N>& args, | |
| const sem::CallTarget* target) { | |
| for (size_t i = 0, n = std::min(args.Length(), target->Parameters().Length()); i < n; i++) { | |
| const auto* param_ty = target->Parameters()[i]->Type(); | |
| if (ShouldMaterializeArgument(param_ty)) { | |
| auto* materialized = Materialize(args[i], param_ty); | |
| if (!materialized) { | |
| return false; | |
| } | |
| args[i] = materialized; | |
| } | |
| if (!param_ty->Is<type::Reference>()) { | |
| auto* load = Load(args[i]); | |
| if (!load) { | |
| return false; | |
| } | |
| args[i] = load; | |
| } | |
| } | |
| return true; | |
| } | |
| bool Resolver::ShouldMaterializeArgument(const type::Type* parameter_ty) const { | |
| const auto* param_el_ty = type::Type::DeepestElementOf(parameter_ty); | |
| return param_el_ty && !param_el_ty->Is<type::AbstractNumeric>(); | |
| } | |
| bool Resolver::Convert(const constant::Value*& c, | |
| const type::Type* target_ty, | |
| const Source& source) { | |
| auto r = const_eval_.Convert(target_ty, c, source); | |
| if (!r) { | |
| return false; | |
| } | |
| c = r.Get(); | |
| return true; | |
| } | |
| template <size_t N> | |
| utils::Result<utils::Vector<const constant::Value*, N>> Resolver::ConvertArguments( | |
| const utils::Vector<const sem::Expression*, N>& args, | |
| const sem::CallTarget* target) { | |
| auto const_args = utils::Transform(args, [](auto* arg) { return arg->ConstantValue(); }); | |
| for (size_t i = 0, n = std::min(args.Length(), target->Parameters().Length()); i < n; i++) { | |
| if (!Convert(const_args[i], target->Parameters()[i]->Type(), | |
| args[i]->Declaration()->source)) { | |
| return utils::Failure; | |
| } | |
| } | |
| return const_args; | |
| } | |
| sem::Expression* Resolver::IndexAccessor(const ast::IndexAccessorExpression* expr) { | |
| auto* idx = Load(Materialize(sem_.Get(expr->index))); | |
| if (!idx) { | |
| return nullptr; | |
| } | |
| const auto* obj = sem_.Get(expr->object); | |
| if (idx->Stage() != sem::EvaluationStage::kConstant) { | |
| // If the index is non-constant, then the resulting expression is non-constant, so we'll | |
| // have to materialize the object. For example, consider: | |
| // vec2(1, 2)[runtime-index] | |
| obj = Materialize(obj); | |
| } | |
| if (!obj) { | |
| return nullptr; | |
| } | |
| auto* obj_raw_ty = obj->Type(); | |
| auto* obj_ty = obj_raw_ty->UnwrapRef(); | |
| auto* ty = Switch( | |
| obj_ty, // | |
| [&](const type::Array* arr) { return arr->ElemType(); }, | |
| [&](const type::Vector* vec) { return vec->type(); }, | |
| [&](const type::Matrix* mat) { | |
| return builder_->create<type::Vector>(mat->type(), mat->rows()); | |
| }, | |
| [&](Default) { | |
| AddError("cannot index type '" + sem_.TypeNameOf(obj_ty) + "'", expr->source); | |
| return nullptr; | |
| }); | |
| if (ty == nullptr) { | |
| return nullptr; | |
| } | |
| auto* idx_ty = idx->Type()->UnwrapRef(); | |
| if (!idx_ty->IsAnyOf<type::I32, type::U32>()) { | |
| AddError("index must be of type 'i32' or 'u32', found: '" + sem_.TypeNameOf(idx_ty) + "'", | |
| idx->Declaration()->source); | |
| return nullptr; | |
| } | |
| // If we're extracting from a reference, we return a reference. | |
| if (auto* ref = obj_raw_ty->As<type::Reference>()) { | |
| ty = builder_->create<type::Reference>(ty, ref->AddressSpace(), ref->Access()); | |
| } | |
| const constant::Value* val = nullptr; | |
| auto stage = sem::EarliestStage(obj->Stage(), idx->Stage()); | |
| if (stage == sem::EvaluationStage::kConstant && skip_const_eval_.Contains(expr)) { | |
| stage = sem::EvaluationStage::kNotEvaluated; | |
| } else { | |
| if (auto r = const_eval_.Index(obj, idx)) { | |
| val = r.Get(); | |
| } else { | |
| return nullptr; | |
| } | |
| } | |
| bool has_side_effects = idx->HasSideEffects() || obj->HasSideEffects(); | |
| auto* sem = builder_->create<sem::IndexAccessorExpression>( | |
| expr, ty, stage, obj, idx, current_statement_, std::move(val), has_side_effects, | |
| obj->RootIdentifier()); | |
| sem->Behaviors() = idx->Behaviors() + obj->Behaviors(); | |
| return sem; | |
| } | |
| sem::Expression* Resolver::Bitcast(const ast::BitcastExpression* expr) { | |
| auto* inner = Load(Materialize(sem_.Get(expr->expr))); | |
| if (!inner) { | |
| return nullptr; | |
| } | |
| auto* ty = Type(expr->type); | |
| if (!ty) { | |
| return nullptr; | |
| } | |
| const constant::Value* val = nullptr; | |
| // TODO(crbug.com/tint/1582): short circuit 'expr' once const eval of Bitcast is implemented. | |
| if (auto r = const_eval_.Bitcast(ty, inner)) { | |
| val = r.Get(); | |
| } else { | |
| return nullptr; | |
| } | |
| auto stage = sem::EvaluationStage::kRuntime; // TODO(crbug.com/tint/1581) | |
| auto* sem = builder_->create<sem::Expression>(expr, ty, stage, current_statement_, | |
| std::move(val), inner->HasSideEffects()); | |
| sem->Behaviors() = inner->Behaviors(); | |
| if (!validator_.Bitcast(expr, ty)) { | |
| return nullptr; | |
| } | |
| return sem; | |
| } | |
| sem::Call* Resolver::Call(const ast::CallExpression* expr) { | |
| // A CallExpression can resolve to one of: | |
| // * A function call. | |
| // * A builtin call. | |
| // * A type initializer. | |
| // * A type conversion. | |
| // Resolve all of the arguments, their types and the set of behaviors. | |
| utils::Vector<const sem::Expression*, 8> args; | |
| args.Reserve(expr->args.Length()); | |
| auto args_stage = sem::EvaluationStage::kConstant; | |
| sem::Behaviors arg_behaviors; | |
| for (size_t i = 0; i < expr->args.Length(); i++) { | |
| auto* arg = sem_.Get(expr->args[i]); | |
| if (!arg) { | |
| return nullptr; | |
| } | |
| args.Push(arg); | |
| args_stage = sem::EarliestStage(args_stage, arg->Stage()); | |
| arg_behaviors.Add(arg->Behaviors()); | |
| } | |
| arg_behaviors.Remove(sem::Behavior::kNext); | |
| // Did any arguments have side effects? | |
| bool has_side_effects = | |
| std::any_of(args.begin(), args.end(), [](auto* e) { return e->HasSideEffects(); }); | |
| // ct_init_or_conv is a helper for building either a sem::TypeInitializer or | |
| // sem::TypeConversion call for a InitConvIntrinsic with an optional template argument type. | |
| auto ct_init_or_conv = [&](InitConvIntrinsic ty, const type::Type* template_arg) -> sem::Call* { | |
| auto arg_tys = utils::Transform(args, [](auto* arg) { return arg->Type(); }); | |
| auto ctor_or_conv = | |
| intrinsic_table_->Lookup(ty, template_arg, arg_tys, args_stage, expr->source); | |
| if (!ctor_or_conv.target) { | |
| return nullptr; | |
| } | |
| if (!MaybeMaterializeAndLoadArguments(args, ctor_or_conv.target)) { | |
| return nullptr; | |
| } | |
| const constant::Value* value = nullptr; | |
| auto stage = sem::EarliestStage(ctor_or_conv.target->Stage(), args_stage); | |
| if (stage == sem::EvaluationStage::kConstant && skip_const_eval_.Contains(expr)) { | |
| stage = sem::EvaluationStage::kNotEvaluated; | |
| } | |
| if (stage == sem::EvaluationStage::kConstant) { | |
| auto const_args = ConvertArguments(args, ctor_or_conv.target); | |
| if (!const_args) { | |
| return nullptr; | |
| } | |
| if (auto r = (const_eval_.*ctor_or_conv.const_eval_fn)( | |
| ctor_or_conv.target->ReturnType(), const_args.Get(), expr->source)) { | |
| value = r.Get(); | |
| } else { | |
| return nullptr; | |
| } | |
| } | |
| return builder_->create<sem::Call>(expr, ctor_or_conv.target, stage, std::move(args), | |
| current_statement_, value, has_side_effects); | |
| }; | |
| // arr_or_str_init is a helper for building a sem::TypeInitializer for an array or structure | |
| // initializer call target. | |
| auto arr_or_str_init = [&](const type::Type* ty, | |
| const sem::CallTarget* call_target) -> sem::Call* { | |
| if (!MaybeMaterializeAndLoadArguments(args, call_target)) { | |
| return nullptr; | |
| } | |
| auto stage = args_stage; // The evaluation stage of the call | |
| const constant::Value* value = nullptr; // The constant value for the call | |
| if (stage == sem::EvaluationStage::kConstant) { | |
| if (auto r = const_eval_.ArrayOrStructInit(ty, args)) { | |
| value = r.Get(); | |
| } else { | |
| return nullptr; | |
| } | |
| if (!value) { | |
| // Constant evaluation failed. | |
| // Can happen for expressions that will fail validation (later). | |
| // Use the kRuntime EvaluationStage, as kConstant will trigger an assertion in | |
| // the sem::Expression initializer, which checks that kConstant is paired with a | |
| // constant value. | |
| stage = sem::EvaluationStage::kRuntime; | |
| } | |
| } | |
| return builder_->create<sem::Call>(expr, call_target, stage, std::move(args), | |
| current_statement_, value, has_side_effects); | |
| }; | |
| // ty_init_or_conv is a helper for building either a sem::TypeInitializer or | |
| // sem::TypeConversion call for the given semantic type. | |
| auto ty_init_or_conv = [&](const type::Type* ty) { | |
| return Switch( | |
| ty, // | |
| [&](const type::Vector* v) { | |
| return ct_init_or_conv(VectorInitConvIntrinsic(v->Width()), v->type()); | |
| }, | |
| [&](const type::Matrix* m) { | |
| return ct_init_or_conv(MatrixInitConvIntrinsic(m->columns(), m->rows()), m->type()); | |
| }, | |
| [&](const type::I32*) { return ct_init_or_conv(InitConvIntrinsic::kI32, nullptr); }, | |
| [&](const type::U32*) { return ct_init_or_conv(InitConvIntrinsic::kU32, nullptr); }, | |
| [&](const type::F16*) { | |
| return validator_.CheckF16Enabled(expr->source) | |
| ? ct_init_or_conv(InitConvIntrinsic::kF16, nullptr) | |
| : nullptr; | |
| }, | |
| [&](const type::F32*) { return ct_init_or_conv(InitConvIntrinsic::kF32, nullptr); }, | |
| [&](const type::Bool*) { return ct_init_or_conv(InitConvIntrinsic::kBool, nullptr); }, | |
| [&](const type::Array* arr) -> sem::Call* { | |
| auto* call_target = array_inits_.GetOrCreate( | |
| ArrayInitializerSig{{arr, args.Length(), args_stage}}, | |
| [&]() -> sem::TypeInitializer* { | |
| auto params = utils::Transform(args, [&](auto, size_t i) { | |
| return builder_->create<sem::Parameter>( | |
| nullptr, // declaration | |
| static_cast<uint32_t>(i), // index | |
| arr->ElemType(), // type | |
| ast::AddressSpace::kNone, // address_space | |
| ast::Access::kUndefined); | |
| }); | |
| return builder_->create<sem::TypeInitializer>(arr, std::move(params), | |
| args_stage); | |
| }); | |
| auto* call = arr_or_str_init(arr, call_target); | |
| if (!call) { | |
| return nullptr; | |
| } | |
| // Validation must occur after argument materialization in arr_or_str_init(). | |
| if (!validator_.ArrayInitializer(expr, arr)) { | |
| return nullptr; | |
| } | |
| return call; | |
| }, | |
| [&](const sem::Struct* str) -> sem::Call* { | |
| auto* call_target = struct_inits_.GetOrCreate( | |
| StructInitializerSig{{str, args.Length(), args_stage}}, | |
| [&]() -> sem::TypeInitializer* { | |
| utils::Vector<const sem::Parameter*, 8> params; | |
| params.Resize(std::min(args.Length(), str->Members().Length())); | |
| for (size_t i = 0, n = params.Length(); i < n; i++) { | |
| params[i] = builder_->create<sem::Parameter>( | |
| nullptr, // declaration | |
| static_cast<uint32_t>(i), // index | |
| str->Members()[i]->Type(), // type | |
| ast::AddressSpace::kNone, // address_space | |
| ast::Access::kUndefined); // access | |
| } | |
| return builder_->create<sem::TypeInitializer>(str, std::move(params), | |
| args_stage); | |
| }); | |
| auto* call = arr_or_str_init(str, call_target); | |
| if (!call) { | |
| return nullptr; | |
| } | |
| // Validation must occur after argument materialization in arr_or_str_init(). | |
| if (!validator_.StructureInitializer(expr, str)) { | |
| return nullptr; | |
| } | |
| return call; | |
| }, | |
| [&](Default) { | |
| AddError("type is not constructible", expr->source); | |
| return nullptr; | |
| }); | |
| }; | |
| // ast::CallExpression has a target which is either an ast::Type or an | |
| // ast::IdentifierExpression | |
| sem::Call* call = nullptr; | |
| if (expr->target.type) { | |
| // ast::CallExpression has an ast::Type as the target. | |
| // This call is either a type initializer or type conversion. | |
| call = Switch( | |
| expr->target.type, | |
| [&](const ast::Vector* v) -> sem::Call* { | |
| Mark(v); | |
| // vector element type must be inferred if it was not specified. | |
| type::Type* template_arg = nullptr; | |
| if (v->type) { | |
| template_arg = Type(v->type); | |
| if (!template_arg) { | |
| return nullptr; | |
| } | |
| } | |
| if (auto* c = ct_init_or_conv(VectorInitConvIntrinsic(v->width), template_arg)) { | |
| builder_->Sem().Add(expr->target.type, c->Target()->ReturnType()); | |
| return c; | |
| } | |
| return nullptr; | |
| }, | |
| [&](const ast::Matrix* m) -> sem::Call* { | |
| Mark(m); | |
| // matrix element type must be inferred if it was not specified. | |
| type::Type* template_arg = nullptr; | |
| if (m->type) { | |
| template_arg = Type(m->type); | |
| if (!template_arg) { | |
| return nullptr; | |
| } | |
| } | |
| if (auto* c = ct_init_or_conv(MatrixInitConvIntrinsic(m->columns, m->rows), | |
| template_arg)) { | |
| builder_->Sem().Add(expr->target.type, c->Target()->ReturnType()); | |
| return c; | |
| } | |
| return nullptr; | |
| }, | |
| [&](const ast::Array* a) -> sem::Call* { | |
| Mark(a); | |
| // array element type must be inferred if it was not specified. | |
| const type::ArrayCount* el_count = nullptr; | |
| const type::Type* el_ty = nullptr; | |
| if (a->type) { | |
| el_ty = Type(a->type); | |
| if (!el_ty) { | |
| return nullptr; | |
| } | |
| if (!a->count) { | |
| AddError("cannot construct a runtime-sized array", expr->source); | |
| return nullptr; | |
| } | |
| el_count = ArrayCount(a->count); | |
| if (!el_count) { | |
| return nullptr; | |
| } | |
| // Note: validation later will detect any mismatches between explicit array | |
| // size and number of initializer expressions. | |
| } else { | |
| el_count = builder_->create<type::ConstantArrayCount>( | |
| static_cast<uint32_t>(args.Length())); | |
| auto arg_tys = | |
| utils::Transform(args, [](auto* arg) { return arg->Type()->UnwrapRef(); }); | |
| el_ty = type::Type::Common(arg_tys); | |
| if (!el_ty) { | |
| AddError( | |
| "cannot infer common array element type from initializer arguments", | |
| expr->source); | |
| utils::Hashset<const type::Type*, 8> types; | |
| for (size_t i = 0; i < args.Length(); i++) { | |
| if (types.Add(args[i]->Type())) { | |
| AddNote("argument " + std::to_string(i) + " is of type '" + | |
| sem_.TypeNameOf(args[i]->Type()) + "'", | |
| args[i]->Declaration()->source); | |
| } | |
| } | |
| return nullptr; | |
| } | |
| } | |
| uint32_t explicit_stride = 0; | |
| if (!ArrayAttributes(a->attributes, el_ty, explicit_stride)) { | |
| return nullptr; | |
| } | |
| auto* arr = Array(a->type ? a->type->source : a->source, | |
| a->count ? a->count->source : a->source, // | |
| el_ty, el_count, explicit_stride); | |
| if (!arr) { | |
| return nullptr; | |
| } | |
| builder_->Sem().Add(a, arr); | |
| return ty_init_or_conv(arr); | |
| }, | |
| [&](const ast::Type* ast) -> sem::Call* { | |
| // Handler for AST types that do not have an optional element type. | |
| if (auto* ty = Type(ast)) { | |
| return ty_init_or_conv(ty); | |
| } | |
| return nullptr; | |
| }, | |
| [&](Default) { | |
| TINT_ICE(Resolver, diagnostics_) | |
| << expr->source << " unhandled CallExpression target:\n" | |
| << "type: " | |
| << (expr->target.type ? expr->target.type->TypeInfo().name : "<null>"); | |
| return nullptr; | |
| }); | |
| } else { | |
| // ast::CallExpression has an ast::IdentifierExpression as the target. | |
| // This call is either a function call, builtin call, type initializer or type | |
| // conversion. | |
| auto* ident = expr->target.name; | |
| Mark(ident); | |
| if (auto* resolved = sem_.ResolvedSymbol<type::Type>(ident)) { | |
| // A type initializer or conversions. | |
| // Note: Unlike the code path where we're resolving the call target from an | |
| // ast::Type, all types must already have the element type explicitly specified, | |
| // so there's no need to infer element types. | |
| return ty_init_or_conv(resolved); | |
| } | |
| auto* resolved = sem_.ResolvedSymbol<sem::Node>(ident); | |
| call = Switch<sem::Call*>( | |
| resolved, // | |
| [&](sem::Function* func) { return FunctionCall(expr, func, args, arg_behaviors); }, | |
| [&](sem::Variable* var) { | |
| auto name = builder_->Symbols().NameFor(var->Declaration()->symbol); | |
| AddError("cannot call variable '" + name + "'", ident->source); | |
| AddNote("'" + name + "' declared here", var->Declaration()->source); | |
| return nullptr; | |
| }, | |
| [&](Default) -> sem::Call* { | |
| auto name = builder_->Symbols().NameFor(ident->symbol); | |
| if (auto builtin_type = sem::ParseBuiltinType(name); | |
| builtin_type != sem::BuiltinType::kNone) { | |
| return BuiltinCall(expr, builtin_type, args); | |
| } | |
| if (auto* alias = ShortName(ident->symbol, ident->source)) { | |
| return ty_init_or_conv(alias); | |
| } | |
| return nullptr; | |
| }); | |
| } | |
| if (!call) { | |
| return nullptr; | |
| } | |
| return validator_.Call(call, current_statement_) ? call : nullptr; | |
| } | |
| template <size_t N> | |
| sem::Call* Resolver::BuiltinCall(const ast::CallExpression* expr, | |
| sem::BuiltinType builtin_type, | |
| utils::Vector<const sem::Expression*, N>& args) { | |
| auto arg_stage = sem::EvaluationStage::kConstant; | |
| for (auto* arg : args) { | |
| arg_stage = sem::EarliestStage(arg_stage, arg->Stage()); | |
| } | |
| IntrinsicTable::Builtin builtin; | |
| { | |
| auto arg_tys = utils::Transform(args, [](auto* arg) { return arg->Type(); }); | |
| builtin = intrinsic_table_->Lookup(builtin_type, arg_tys, arg_stage, expr->source); | |
| if (!builtin.sem) { | |
| return nullptr; | |
| } | |
| } | |
| if (builtin_type == sem::BuiltinType::kTintMaterialize) { | |
| args[0] = Materialize(args[0]); | |
| if (!args[0]) { | |
| return nullptr; | |
| } | |
| } else { | |
| // Materialize arguments if the parameter type is not abstract | |
| if (!MaybeMaterializeAndLoadArguments(args, builtin.sem)) { | |
| return nullptr; | |
| } | |
| } | |
| if (builtin.sem->IsDeprecated()) { | |
| AddWarning("use of deprecated builtin", expr->source); | |
| } | |
| // If the builtin is @const, and all arguments have constant values, evaluate the builtin | |
| // now. | |
| const constant::Value* value = nullptr; | |
| auto stage = sem::EarliestStage(arg_stage, builtin.sem->Stage()); | |
| if (stage == sem::EvaluationStage::kConstant && skip_const_eval_.Contains(expr)) { | |
| stage = sem::EvaluationStage::kNotEvaluated; | |
| } | |
| if (stage == sem::EvaluationStage::kConstant) { | |
| auto const_args = ConvertArguments(args, builtin.sem); | |
| if (!const_args) { | |
| return nullptr; | |
| } | |
| if (auto r = (const_eval_.*builtin.const_eval_fn)(builtin.sem->ReturnType(), | |
| const_args.Get(), expr->source)) { | |
| value = r.Get(); | |
| } else { | |
| return nullptr; | |
| } | |
| } | |
| bool has_side_effects = | |
| builtin.sem->HasSideEffects() || | |
| std::any_of(args.begin(), args.end(), [](auto* e) { return e->HasSideEffects(); }); | |
| auto* call = builder_->create<sem::Call>(expr, builtin.sem, stage, std::move(args), | |
| current_statement_, value, has_side_effects); | |
| if (current_function_) { | |
| current_function_->AddDirectlyCalledBuiltin(builtin.sem); | |
| current_function_->AddDirectCall(call); | |
| } | |
| if (!validator_.RequiredExtensionForBuiltinFunction(call)) { | |
| return nullptr; | |
| } | |
| if (IsTextureBuiltin(builtin_type)) { | |
| if (!validator_.TextureBuiltinFunction(call)) { | |
| return nullptr; | |
| } | |
| CollectTextureSamplerPairs(builtin.sem, call->Arguments()); | |
| } | |
| if (!validator_.BuiltinCall(call)) { | |
| return nullptr; | |
| } | |
| return call; | |
| } | |
| type::Type* Resolver::ShortName(Symbol sym, const Source& source) const { | |
| auto name = builder_->Symbols().NameFor(sym); | |
| auto& b = *builder_; | |
| auto vec_f32 = [&](uint32_t n) { return b.create<type::Vector>(b.create<type::F32>(), n); }; | |
| auto vec_f16 = [&](uint32_t n) { return b.create<type::Vector>(b.create<type::F16>(), n); }; | |
| switch (type::ParseShortName(name)) { | |
| case type::ShortName::kMat2X2F: | |
| return b.create<type::Matrix>(vec_f32(2u), 2u); | |
| case type::ShortName::kMat2X3F: | |
| return b.create<type::Matrix>(vec_f32(3u), 2u); | |
| case type::ShortName::kMat2X4F: | |
| return b.create<type::Matrix>(vec_f32(4u), 2u); | |
| case type::ShortName::kMat3X2F: | |
| return b.create<type::Matrix>(vec_f32(2u), 3u); | |
| case type::ShortName::kMat3X3F: | |
| return b.create<type::Matrix>(vec_f32(3u), 3u); | |
| case type::ShortName::kMat3X4F: | |
| return b.create<type::Matrix>(vec_f32(4u), 3u); | |
| case type::ShortName::kMat4X2F: | |
| return b.create<type::Matrix>(vec_f32(2u), 4u); | |
| case type::ShortName::kMat4X3F: | |
| return b.create<type::Matrix>(vec_f32(3u), 4u); | |
| case type::ShortName::kMat4X4F: | |
| return b.create<type::Matrix>(vec_f32(4u), 4u); | |
| case type::ShortName::kMat2X2H: | |
| return validator_.CheckF16Enabled(source) ? b.create<type::Matrix>(vec_f16(2u), 2u) | |
| : nullptr; | |
| case type::ShortName::kMat2X3H: | |
| return validator_.CheckF16Enabled(source) ? b.create<type::Matrix>(vec_f16(3u), 2u) | |
| : nullptr; | |
| case type::ShortName::kMat2X4H: | |
| return validator_.CheckF16Enabled(source) ? b.create<type::Matrix>(vec_f16(4u), 2u) | |
| : nullptr; | |
| case type::ShortName::kMat3X2H: | |
| return validator_.CheckF16Enabled(source) ? b.create<type::Matrix>(vec_f16(2u), 3u) | |
| : nullptr; | |
| case type::ShortName::kMat3X3H: | |
| return validator_.CheckF16Enabled(source) ? b.create<type::Matrix>(vec_f16(3u), 3u) | |
| : nullptr; | |
| case type::ShortName::kMat3X4H: | |
| return validator_.CheckF16Enabled(source) ? b.create<type::Matrix>(vec_f16(4u), 3u) | |
| : nullptr; | |
| case type::ShortName::kMat4X2H: | |
| return validator_.CheckF16Enabled(source) ? b.create<type::Matrix>(vec_f16(2u), 4u) | |
| : nullptr; | |
| case type::ShortName::kMat4X3H: | |
| return validator_.CheckF16Enabled(source) ? b.create<type::Matrix>(vec_f16(3u), 4u) | |
| : nullptr; | |
| case type::ShortName::kMat4X4H: | |
| return validator_.CheckF16Enabled(source) ? b.create<type::Matrix>(vec_f16(4u), 4u) | |
| : nullptr; | |
| case type::ShortName::kVec2F: | |
| return vec_f32(2u); | |
| case type::ShortName::kVec3F: | |
| return vec_f32(3u); | |
| case type::ShortName::kVec4F: | |
| return vec_f32(4u); | |
| case type::ShortName::kVec2H: | |
| return validator_.CheckF16Enabled(source) ? vec_f16(2u) : nullptr; | |
| case type::ShortName::kVec3H: | |
| return validator_.CheckF16Enabled(source) ? vec_f16(3u) : nullptr; | |
| case type::ShortName::kVec4H: | |
| return validator_.CheckF16Enabled(source) ? vec_f16(4u) : nullptr; | |
| case type::ShortName::kVec2I: | |
| return b.create<type::Vector>(b.create<type::I32>(), 2u); | |
| case type::ShortName::kVec3I: | |
| return b.create<type::Vector>(b.create<type::I32>(), 3u); | |
| case type::ShortName::kVec4I: | |
| return b.create<type::Vector>(b.create<type::I32>(), 4u); | |
| case type::ShortName::kVec2U: | |
| return b.create<type::Vector>(b.create<type::U32>(), 2u); | |
| case type::ShortName::kVec3U: | |
| return b.create<type::Vector>(b.create<type::U32>(), 3u); | |
| case type::ShortName::kVec4U: | |
| return b.create<type::Vector>(b.create<type::U32>(), 4u); | |
| case type::ShortName::kUndefined: | |
| break; | |
| } | |
| TINT_ICE(Resolver, diagnostics_) << source << " unhandled type short name '" << name << "'"; | |
| return nullptr; | |
| } | |
| void Resolver::CollectTextureSamplerPairs(const sem::Builtin* builtin, | |
| utils::VectorRef<const sem::Expression*> args) const { | |
| // Collect a texture/sampler pair for this builtin. | |
| const auto& signature = builtin->Signature(); | |
| int texture_index = signature.IndexOf(sem::ParameterUsage::kTexture); | |
| if (texture_index == -1) { | |
| TINT_ICE(Resolver, diagnostics_) << "texture builtin without texture parameter"; | |
| } | |
| if (auto* user = | |
| args[static_cast<size_t>(texture_index)]->UnwrapLoad()->As<sem::VariableUser>()) { | |
| auto* texture = user->Variable(); | |
| if (!texture->Type()->UnwrapRef()->Is<type::StorageTexture>()) { | |
| int sampler_index = signature.IndexOf(sem::ParameterUsage::kSampler); | |
| const sem::Variable* sampler = sampler_index != -1 | |
| ? args[static_cast<size_t>(sampler_index)] | |
| ->UnwrapLoad() | |
| ->As<sem::VariableUser>() | |
| ->Variable() | |
| : nullptr; | |
| current_function_->AddTextureSamplerPair(texture, sampler); | |
| } | |
| } | |
| } | |
| template <size_t N> | |
| sem::Call* Resolver::FunctionCall(const ast::CallExpression* expr, | |
| sem::Function* target, | |
| utils::Vector<const sem::Expression*, N>& args, | |
| sem::Behaviors arg_behaviors) { | |
| auto sym = expr->target.name->symbol; | |
| auto name = builder_->Symbols().NameFor(sym); | |
| if (!MaybeMaterializeAndLoadArguments(args, target)) { | |
| return nullptr; | |
| } | |
| // TODO(crbug.com/tint/1420): For now, assume all function calls have side | |
| // effects. | |
| bool has_side_effects = true; | |
| auto* call = builder_->create<sem::Call>(expr, target, sem::EvaluationStage::kRuntime, | |
| std::move(args), current_statement_, | |
| /* constant_value */ nullptr, has_side_effects); | |
| target->AddCallSite(call); | |
| call->Behaviors() = arg_behaviors + target->Behaviors(); | |
| if (!validator_.FunctionCall(call, current_statement_)) { | |
| return nullptr; | |
| } | |
| if (current_function_) { | |
| // Note: Requires called functions to be resolved first. | |
| // This is currently guaranteed as functions must be declared before | |
| // use. | |
| current_function_->AddTransitivelyCalledFunction(target); | |
| current_function_->AddDirectCall(call); | |
| for (auto* transitive_call : target->TransitivelyCalledFunctions()) { | |
| current_function_->AddTransitivelyCalledFunction(transitive_call); | |
| } | |
| // We inherit any referenced variables from the callee. | |
| for (auto* var : target->TransitivelyReferencedGlobals()) { | |
| current_function_->AddTransitivelyReferencedGlobal(var); | |
| } | |
| if (!AliasAnalysis(call)) { | |
| return nullptr; | |
| } | |
| // Note: Validation *must* be performed before calling this method. | |
| CollectTextureSamplerPairs(target, call->Arguments()); | |
| } | |
| return call; | |
| } | |
| void Resolver::CollectTextureSamplerPairs(sem::Function* func, | |
| utils::VectorRef<const sem::Expression*> args) const { | |
| // Map all texture/sampler pairs from the target function to the | |
| // current function. These can only be global or parameter | |
| // variables. Resolve any parameter variables to the corresponding | |
| // argument passed to the current function. Leave global variables | |
| // as-is. Then add the mapped pair to the current function's list of | |
| // texture/sampler pairs. | |
| for (sem::VariablePair pair : func->TextureSamplerPairs()) { | |
| const sem::Variable* texture = pair.first; | |
| const sem::Variable* sampler = pair.second; | |
| if (auto* param = texture->As<sem::Parameter>()) { | |
| texture = args[param->Index()]->UnwrapLoad()->As<sem::VariableUser>()->Variable(); | |
| } | |
| if (sampler) { | |
| if (auto* param = sampler->As<sem::Parameter>()) { | |
| sampler = args[param->Index()]->UnwrapLoad()->As<sem::VariableUser>()->Variable(); | |
| } | |
| } | |
| current_function_->AddTextureSamplerPair(texture, sampler); | |
| } | |
| } | |
| sem::Expression* Resolver::Literal(const ast::LiteralExpression* literal) { | |
| auto* ty = Switch( | |
| literal, | |
| [&](const ast::IntLiteralExpression* i) -> type::Type* { | |
| switch (i->suffix) { | |
| case ast::IntLiteralExpression::Suffix::kNone: | |
| return builder_->create<type::AbstractInt>(); | |
| case ast::IntLiteralExpression::Suffix::kI: | |
| return builder_->create<type::I32>(); | |
| case ast::IntLiteralExpression::Suffix::kU: | |
| return builder_->create<type::U32>(); | |
| } | |
| TINT_UNREACHABLE(Resolver, builder_->Diagnostics()) | |
| << "Unhandled integer literal suffix: " << i->suffix; | |
| return nullptr; | |
| }, | |
| [&](const ast::FloatLiteralExpression* f) -> type::Type* { | |
| switch (f->suffix) { | |
| case ast::FloatLiteralExpression::Suffix::kNone: | |
| return builder_->create<type::AbstractFloat>(); | |
| case ast::FloatLiteralExpression::Suffix::kF: | |
| return builder_->create<type::F32>(); | |
| case ast::FloatLiteralExpression::Suffix::kH: | |
| return validator_.CheckF16Enabled(literal->source) | |
| ? builder_->create<type::F16>() | |
| : nullptr; | |
| } | |
| TINT_UNREACHABLE(Resolver, builder_->Diagnostics()) | |
| << "Unhandled float literal suffix: " << f->suffix; | |
| return nullptr; | |
| }, | |
| [&](const ast::BoolLiteralExpression*) { return builder_->create<type::Bool>(); }, | |
| [&](Default) { | |
| TINT_UNREACHABLE(Resolver, builder_->Diagnostics()) | |
| << "Unhandled literal type: " << literal->TypeInfo().name; | |
| return nullptr; | |
| }); | |
| if (ty == nullptr) { | |
| return nullptr; | |
| } | |
| const constant::Value* val = nullptr; | |
| if (auto r = const_eval_.Literal(ty, literal)) { | |
| val = r.Get(); | |
| } else { | |
| return nullptr; | |
| } | |
| return builder_->create<sem::Expression>(literal, ty, sem::EvaluationStage::kConstant, | |
| current_statement_, std::move(val), | |
| /* has_side_effects */ false); | |
| } | |
| sem::Expression* Resolver::Identifier(const ast::IdentifierExpression* expr) { | |
| auto symbol = expr->symbol; | |
| auto* sem_resolved = sem_.ResolvedSymbol<sem::Node>(expr); | |
| if (auto* variable = As<sem::Variable>(sem_resolved)) { | |
| auto* user = builder_->create<sem::VariableUser>(expr, current_statement_, variable); | |
| if (current_statement_) { | |
| // If identifier is part of a loop continuing block, make sure it | |
| // doesn't refer to a variable that is bypassed by a continue statement | |
| // in the loop's body block. | |
| if (auto* continuing_block = | |
| current_statement_->FindFirstParent<sem::LoopContinuingBlockStatement>()) { | |
| auto* loop_block = continuing_block->FindFirstParent<sem::LoopBlockStatement>(); | |
| if (loop_block->FirstContinue()) { | |
| // If our identifier is in loop_block->decls, make sure its index is | |
| // less than first_continue | |
| if (auto decl = loop_block->Decls().Find(symbol)) { | |
| if (decl->order >= loop_block->NumDeclsAtFirstContinue()) { | |
| AddError("continue statement bypasses declaration of '" + | |
| builder_->Symbols().NameFor(symbol) + "'", | |
| loop_block->FirstContinue()->source); | |
| AddNote("identifier '" + builder_->Symbols().NameFor(symbol) + | |
| "' declared here", | |
| decl->variable->Declaration()->source); | |
| AddNote("identifier '" + builder_->Symbols().NameFor(symbol) + | |
| "' referenced in continuing block here", | |
| expr->source); | |
| return nullptr; | |
| } | |
| } | |
| } | |
| } | |
| } | |
| auto* global = variable->As<sem::GlobalVariable>(); | |
| if (current_function_) { | |
| if (global) { | |
| current_function_->AddDirectlyReferencedGlobal(global); | |
| auto* refs = builder_->Sem().TransitivelyReferencedOverrides(global); | |
| if (refs) { | |
| for (auto* var : *refs) { | |
| current_function_->AddTransitivelyReferencedGlobal(var); | |
| } | |
| } | |
| } | |
| } else if (variable->Declaration()->Is<ast::Override>()) { | |
| if (resolved_overrides_) { | |
| // Track the reference to this pipeline-overridable constant and any other | |
| // pipeline-overridable constants that it references. | |
| resolved_overrides_->Add(global); | |
| auto* refs = builder_->Sem().TransitivelyReferencedOverrides(global); | |
| if (refs) { | |
| for (auto* var : *refs) { | |
| resolved_overrides_->Add(var); | |
| } | |
| } | |
| } | |
| } else if (variable->Declaration()->Is<ast::Var>()) { | |
| // Use of a module-scope 'var' outside of a function. | |
| // Note: The spec is currently vague around the rules here. See | |
| // https://github.com/gpuweb/gpuweb/issues/3081. Remove this comment when resolved. | |
| std::string desc = "var '" + builder_->Symbols().NameFor(symbol) + "' "; | |
| AddError(desc + "cannot be referenced at module-scope", expr->source); | |
| AddNote(desc + "declared here", variable->Declaration()->source); | |
| return nullptr; | |
| } | |
| variable->AddUser(user); | |
| return user; | |
| } | |
| if (Is<sem::Function>(sem_resolved)) { | |
| AddError("missing '(' for function call", expr->source.End()); | |
| return nullptr; | |
| } | |
| if (IsBuiltin(symbol)) { | |
| AddError("missing '(' for builtin call", expr->source.End()); | |
| return nullptr; | |
| } | |
| if (sem_.ResolvedSymbol<type::Type>(expr)) { | |
| AddError("missing '(' for type initializer or cast", expr->source.End()); | |
| return nullptr; | |
| } | |
| TINT_ICE(Resolver, diagnostics_) | |
| << expr->source << " unresolved identifier:\n" | |
| << "resolved: " << (sem_resolved ? sem_resolved->TypeInfo().name : "<null>") << "\n" | |
| << "name: " << builder_->Symbols().NameFor(symbol); | |
| return nullptr; | |
| } | |
| sem::Expression* Resolver::MemberAccessor(const ast::MemberAccessorExpression* expr) { | |
| auto* structure = sem_.TypeOf(expr->structure); | |
| auto* storage_ty = structure->UnwrapRef(); | |
| auto* object = sem_.Get(expr->structure); | |
| auto* root_ident = object->RootIdentifier(); | |
| const type::Type* ty = nullptr; | |
| // Object may be a side-effecting expression (e.g. function call). | |
| bool has_side_effects = object && object->HasSideEffects(); | |
| return Switch( | |
| storage_ty, // | |
| [&](const sem::Struct* str) -> sem::Expression* { | |
| Mark(expr->member); | |
| auto symbol = expr->member->symbol; | |
| const sem::StructMember* member = nullptr; | |
| for (auto* m : str->Members()) { | |
| if (m->Name() == symbol) { | |
| member = m; | |
| break; | |
| } | |
| } | |
| // TODO(crbug.com/tint/1757): Remove | |
| if (utils::HasPrefix(builder_->Symbols().NameFor(str->Name()), "__frexp_result")) { | |
| if (builder_->Symbols().NameFor(symbol) == "sig") { | |
| AddWarning( | |
| "use of deprecated language feature: 'sig' has been renamed to 'fract'", | |
| expr->member->source); | |
| member = str->Members()[0]; | |
| } | |
| } | |
| if (member == nullptr) { | |
| AddError("struct member " + builder_->Symbols().NameFor(symbol) + " not found", | |
| expr->source); | |
| return nullptr; | |
| } | |
| ty = member->Type(); | |
| // If we're extracting from a reference, we return a reference. | |
| if (auto* ref = structure->As<type::Reference>()) { | |
| ty = builder_->create<type::Reference>(ty, ref->AddressSpace(), ref->Access()); | |
| } | |
| auto val = const_eval_.MemberAccess(object, member); | |
| if (!val) { | |
| return nullptr; | |
| } | |
| return builder_->create<sem::StructMemberAccess>(expr, ty, current_statement_, | |
| val.Get(), object, member, | |
| has_side_effects, root_ident); | |
| }, | |
| [&](const type::Vector* vec) -> sem::Expression* { | |
| Mark(expr->member); | |
| std::string s = builder_->Symbols().NameFor(expr->member->symbol); | |
| auto size = s.size(); | |
| utils::Vector<uint32_t, 4> swizzle; | |
| swizzle.Reserve(s.size()); | |
| for (auto c : s) { | |
| switch (c) { | |
| case 'x': | |
| case 'r': | |
| swizzle.Push(0u); | |
| break; | |
| case 'y': | |
| case 'g': | |
| swizzle.Push(1u); | |
| break; | |
| case 'z': | |
| case 'b': | |
| swizzle.Push(2u); | |
| break; | |
| case 'w': | |
| case 'a': | |
| swizzle.Push(3u); | |
| break; | |
| default: | |
| AddError("invalid vector swizzle character", | |
| expr->member->source.Begin() + swizzle.Length()); | |
| return nullptr; | |
| } | |
| if (swizzle.Back() >= vec->Width()) { | |
| AddError("invalid vector swizzle member", expr->member->source); | |
| return nullptr; | |
| } | |
| } | |
| if (size < 1 || size > 4) { | |
| AddError("invalid vector swizzle size", expr->member->source); | |
| return nullptr; | |
| } | |
| // All characters are valid, check if they're being mixed | |
| auto is_rgba = [](char c) { return c == 'r' || c == 'g' || c == 'b' || c == 'a'; }; | |
| auto is_xyzw = [](char c) { return c == 'x' || c == 'y' || c == 'z' || c == 'w'; }; | |
| if (!std::all_of(s.begin(), s.end(), is_rgba) && | |
| !std::all_of(s.begin(), s.end(), is_xyzw)) { | |
| AddError("invalid mixing of vector swizzle characters rgba with xyzw", | |
| expr->member->source); | |
| return nullptr; | |
| } | |
| const sem::Expression* obj_expr = object; | |
| if (size == 1) { | |
| // A single element swizzle is just the type of the vector. | |
| ty = vec->type(); | |
| // If we're extracting from a reference, we return a reference. | |
| if (auto* ref = structure->As<type::Reference>()) { | |
| ty = builder_->create<type::Reference>(ty, ref->AddressSpace(), ref->Access()); | |
| } | |
| } else { | |
| // The vector will have a number of components equal to the length of | |
| // the swizzle. | |
| ty = builder_->create<type::Vector>(vec->type(), static_cast<uint32_t>(size)); | |
| // The load rule is invoked before the swizzle, if necessary. | |
| obj_expr = Load(object); | |
| } | |
| auto val = const_eval_.Swizzle(ty, object, swizzle); | |
| if (!val) { | |
| return nullptr; | |
| } | |
| return builder_->create<sem::Swizzle>(expr, ty, current_statement_, val.Get(), obj_expr, | |
| std::move(swizzle), has_side_effects, root_ident); | |
| }, | |
| [&](Default) { | |
| AddError("invalid member accessor expression. Expected vector or struct, got '" + | |
| sem_.TypeNameOf(storage_ty) + "'", | |
| expr->structure->source); | |
| return nullptr; | |
| }); | |
| } | |
| sem::Expression* Resolver::Binary(const ast::BinaryExpression* expr) { | |
| const auto* lhs = sem_.Get(expr->lhs); | |
| const auto* rhs = sem_.Get(expr->rhs); | |
| auto* lhs_ty = lhs->Type()->UnwrapRef(); | |
| auto* rhs_ty = rhs->Type()->UnwrapRef(); | |
| auto stage = sem::EarliestStage(lhs->Stage(), rhs->Stage()); | |
| auto op = intrinsic_table_->Lookup(expr->op, lhs_ty, rhs_ty, stage, expr->source, false); | |
| if (!op.result) { | |
| return nullptr; | |
| } | |
| if (ShouldMaterializeArgument(op.lhs)) { | |
| lhs = Materialize(lhs, op.lhs); | |
| if (!lhs) { | |
| return nullptr; | |
| } | |
| } | |
| if (ShouldMaterializeArgument(op.rhs)) { | |
| rhs = Materialize(rhs, op.rhs); | |
| if (!rhs) { | |
| return nullptr; | |
| } | |
| } | |
| // Load arguments if they are references | |
| lhs = Load(lhs); | |
| if (!lhs) { | |
| return nullptr; | |
| } | |
| rhs = Load(rhs); | |
| if (!rhs) { | |
| return nullptr; | |
| } | |
| const constant::Value* value = nullptr; | |
| if (stage == sem::EvaluationStage::kConstant) { | |
| if (op.const_eval_fn) { | |
| if (skip_const_eval_.Contains(expr)) { | |
| stage = sem::EvaluationStage::kNotEvaluated; | |
| } else if (skip_const_eval_.Contains(expr->rhs)) { | |
| // Only the rhs should be short-circuited, use the lhs value | |
| value = lhs->ConstantValue(); | |
| } else { | |
| auto const_args = utils::Vector{lhs->ConstantValue(), rhs->ConstantValue()}; | |
| // Implicit conversion (e.g. AInt -> AFloat) | |
| if (!Convert(const_args[0], op.lhs, lhs->Declaration()->source)) { | |
| return nullptr; | |
| } | |
| if (!Convert(const_args[1], op.rhs, rhs->Declaration()->source)) { | |
| return nullptr; | |
| } | |
| if (auto r = (const_eval_.*op.const_eval_fn)(op.result, const_args, expr->source)) { | |
| value = r.Get(); | |
| } else { | |
| return nullptr; | |
| } | |
| } | |
| } else { | |
| stage = sem::EvaluationStage::kRuntime; | |
| } | |
| } | |
| bool has_side_effects = lhs->HasSideEffects() || rhs->HasSideEffects(); | |
| auto* sem = builder_->create<sem::Expression>(expr, op.result, stage, current_statement_, value, | |
| has_side_effects); | |
| sem->Behaviors() = lhs->Behaviors() + rhs->Behaviors(); | |
| return sem; | |
| } | |
| sem::Expression* Resolver::UnaryOp(const ast::UnaryOpExpression* unary) { | |
| const auto* expr = sem_.Get(unary->expr); | |
| auto* expr_ty = expr->Type(); | |
| if (!expr_ty) { | |
| return nullptr; | |
| } | |
| const type::Type* ty = nullptr; | |
| const sem::Variable* root_ident = nullptr; | |
| const constant::Value* value = nullptr; | |
| auto stage = sem::EvaluationStage::kRuntime; | |
| switch (unary->op) { | |
| case ast::UnaryOp::kAddressOf: | |
| if (auto* ref = expr_ty->As<type::Reference>()) { | |
| if (ref->StoreType()->UnwrapRef()->is_handle()) { | |
| AddError("cannot take the address of expression in handle address space", | |
| unary->expr->source); | |
| return nullptr; | |
| } | |
| auto* array = unary->expr->As<ast::IndexAccessorExpression>(); | |
| auto* member = unary->expr->As<ast::MemberAccessorExpression>(); | |
| if ((array && sem_.TypeOf(array->object)->UnwrapRef()->Is<type::Vector>()) || | |
| (member && sem_.TypeOf(member->structure)->UnwrapRef()->Is<type::Vector>())) { | |
| AddError("cannot take the address of a vector component", unary->expr->source); | |
| return nullptr; | |
| } | |
| ty = builder_->create<type::Pointer>(ref->StoreType(), ref->AddressSpace(), | |
| ref->Access()); | |
| root_ident = expr->RootIdentifier(); | |
| } else { | |
| AddError("cannot take the address of expression", unary->expr->source); | |
| return nullptr; | |
| } | |
| break; | |
| case ast::UnaryOp::kIndirection: | |
| if (auto* ptr = expr_ty->As<type::Pointer>()) { | |
| ty = builder_->create<type::Reference>(ptr->StoreType(), ptr->AddressSpace(), | |
| ptr->Access()); | |
| root_ident = expr->RootIdentifier(); | |
| } else { | |
| AddError("cannot dereference expression of type '" + sem_.TypeNameOf(expr_ty) + "'", | |
| unary->expr->source); | |
| return nullptr; | |
| } | |
| break; | |
| default: { | |
| stage = expr->Stage(); | |
| auto op = intrinsic_table_->Lookup(unary->op, expr_ty, stage, unary->source); | |
| if (!op.result) { | |
| return nullptr; | |
| } | |
| ty = op.result; | |
| if (ShouldMaterializeArgument(op.parameter)) { | |
| expr = Materialize(expr, op.parameter); | |
| if (!expr) { | |
| return nullptr; | |
| } | |
| } | |
| // Load expr if it is a reference | |
| expr = Load(expr); | |
| if (!expr) { | |
| return nullptr; | |
| } | |
| stage = expr->Stage(); | |
| if (stage == sem::EvaluationStage::kConstant) { | |
| if (op.const_eval_fn) { | |
| if (auto r = (const_eval_.*op.const_eval_fn)( | |
| ty, utils::Vector{expr->ConstantValue()}, | |
| expr->Declaration()->source)) { | |
| value = r.Get(); | |
| } else { | |
| return nullptr; | |
| } | |
| } else { | |
| stage = sem::EvaluationStage::kRuntime; | |
| } | |
| } | |
| break; | |
| } | |
| } | |
| auto* sem = builder_->create<sem::Expression>(unary, ty, stage, current_statement_, value, | |
| expr->HasSideEffects(), root_ident); | |
| sem->Behaviors() = expr->Behaviors(); | |
| return sem; | |
| } | |
| bool Resolver::Enable(const ast::Enable* enable) { | |
| enabled_extensions_.Add(enable->extension); | |
| return true; | |
| } | |
| type::Type* Resolver::TypeDecl(const ast::TypeDecl* named_type) { | |
| type::Type* result = nullptr; | |
| if (auto* alias = named_type->As<ast::Alias>()) { | |
| result = Alias(alias); | |
| } else if (auto* str = named_type->As<ast::Struct>()) { | |
| result = Structure(str); | |
| } else { | |
| TINT_UNREACHABLE(Resolver, diagnostics_) << "Unhandled TypeDecl"; | |
| } | |
| if (!result) { | |
| return nullptr; | |
| } | |
| builder_->Sem().Add(named_type, result); | |
| return result; | |
| } | |
| type::Array* Resolver::Array(const ast::Array* arr) { | |
| if (!arr->type) { | |
| AddError("missing array element type", arr->source.End()); | |
| return nullptr; | |
| } | |
| utils::UniqueVector<const sem::GlobalVariable*, 4> transitively_referenced_overrides; | |
| TINT_SCOPED_ASSIGNMENT(resolved_overrides_, &transitively_referenced_overrides); | |
| auto* el_ty = Type(arr->type); | |
| if (!el_ty) { | |
| return nullptr; | |
| } | |
| // Look for explicit stride via @stride(n) attribute | |
| uint32_t explicit_stride = 0; | |
| if (!ArrayAttributes(arr->attributes, el_ty, explicit_stride)) { | |
| return nullptr; | |
| } | |
| const type::ArrayCount* el_count = nullptr; | |
| // Evaluate the constant array count expression. | |
| if (auto* count_expr = arr->count) { | |
| el_count = ArrayCount(count_expr); | |
| if (!el_count) { | |
| return nullptr; | |
| } | |
| } else { | |
| el_count = builder_->create<type::RuntimeArrayCount>(); | |
| } | |
| auto* out = Array(arr->type->source, // | |
| arr->count ? arr->count->source : arr->source, // | |
| el_ty, el_count, explicit_stride); | |
| if (out == nullptr) { | |
| return nullptr; | |
| } | |
| if (el_ty->Is<type::Atomic>()) { | |
| atomic_composite_info_.Add(out, &arr->type->source); | |
| } else { | |
| if (auto found = atomic_composite_info_.Get(el_ty)) { | |
| atomic_composite_info_.Add(out, *found); | |
| } | |
| } | |
| // Track the pipeline-overridable constants that are transitively referenced by this array | |
| // type. | |
| for (auto* var : transitively_referenced_overrides) { | |
| builder_->Sem().AddTransitivelyReferencedOverride(out, var); | |
| } | |
| return out; | |
| } | |
| const type::ArrayCount* Resolver::ArrayCount(const ast::Expression* count_expr) { | |
| // Evaluate the constant array count expression. | |
| const auto* count_sem = Materialize(Expression(count_expr)); | |
| if (!count_sem) { | |
| return nullptr; | |
| } | |
| if (count_sem->Stage() == sem::EvaluationStage::kOverride) { | |
| // array count is an override expression. | |
| // Is the count a named 'override'? | |
| if (auto* user = count_sem->UnwrapMaterialize()->As<sem::VariableUser>()) { | |
| if (auto* global = user->Variable()->As<sem::GlobalVariable>()) { | |
| return builder_->create<sem::NamedOverrideArrayCount>(global); | |
| } | |
| } | |
| return builder_->create<sem::UnnamedOverrideArrayCount>(count_sem); | |
| } | |
| auto* count_val = count_sem->ConstantValue(); | |
| if (!count_val) { | |
| AddError("array count must evaluate to a constant integer expression or override variable", | |
| count_expr->source); | |
| return nullptr; | |
| } | |
| if (auto* ty = count_val->Type(); !ty->is_integer_scalar()) { | |
| AddError("array count must evaluate to a constant integer expression, but is type '" + | |
| builder_->FriendlyName(ty) + "'", | |
| count_expr->source); | |
| return nullptr; | |
| } | |
| int64_t count = count_val->ValueAs<AInt>(); | |
| if (count < 1) { | |
| AddError("array count (" + std::to_string(count) + ") must be greater than 0", | |
| count_expr->source); | |
| return nullptr; | |
| } | |
| return builder_->create<type::ConstantArrayCount>(static_cast<uint32_t>(count)); | |
| } | |
| bool Resolver::ArrayAttributes(utils::VectorRef<const ast::Attribute*> attributes, | |
| const type::Type* el_ty, | |
| uint32_t& explicit_stride) { | |
| if (!validator_.NoDuplicateAttributes(attributes)) { | |
| return false; | |
| } | |
| for (auto* attr : attributes) { | |
| Mark(attr); | |
| if (auto* sd = attr->As<ast::StrideAttribute>()) { | |
| // If the element type is not plain, then el_ty->Align() may be 0, in which case we | |
| // could get a DBZ in ArrayStrideAttribute(). In this case, validation will error | |
| // about the invalid array element type (which is tested later), so this is just a | |
| // seatbelt. | |
| if (IsPlain(el_ty)) { | |
| explicit_stride = sd->stride; | |
| if (!validator_.ArrayStrideAttribute(sd, el_ty->Size(), el_ty->Align())) { | |
| return false; | |
| } | |
| } | |
| continue; | |
| } | |
| AddError("attribute is not valid for array types", attr->source); | |
| return false; | |
| } | |
| return true; | |
| } | |
| type::Array* Resolver::Array(const Source& el_source, | |
| const Source& count_source, | |
| const type::Type* el_ty, | |
| const type::ArrayCount* el_count, | |
| uint32_t explicit_stride) { | |
| uint32_t el_align = el_ty->Align(); | |
| uint32_t el_size = el_ty->Size(); | |
| uint64_t implicit_stride = el_size ? utils::RoundUp<uint64_t>(el_align, el_size) : 0; | |
| uint64_t stride = explicit_stride ? explicit_stride : implicit_stride; | |
| uint64_t size = 0; | |
| if (auto const_count = el_count->As<type::ConstantArrayCount>()) { | |
| size = const_count->value * stride; | |
| if (size > std::numeric_limits<uint32_t>::max()) { | |
| std::stringstream msg; | |
| msg << "array byte size (0x" << std::hex << size | |
| << ") must not exceed 0xffffffff bytes"; | |
| AddError(msg.str(), count_source); | |
| return nullptr; | |
| } | |
| } else if (el_count->Is<type::RuntimeArrayCount>()) { | |
| size = stride; | |
| } | |
| auto* out = builder_->create<type::Array>( | |
| el_ty, el_count, el_align, static_cast<uint32_t>(size), static_cast<uint32_t>(stride), | |
| static_cast<uint32_t>(implicit_stride)); | |
| if (!validator_.Array(out, el_source)) { | |
| return nullptr; | |
| } | |
| return out; | |
| } | |
| type::Type* Resolver::Alias(const ast::Alias* alias) { | |
| auto* ty = Type(alias->type); | |
| if (!ty) { | |
| return nullptr; | |
| } | |
| if (!validator_.Alias(alias)) { | |
| return nullptr; | |
| } | |
| return ty; | |
| } | |
| sem::Struct* Resolver::Structure(const ast::Struct* str) { | |
| if (!validator_.NoDuplicateAttributes(str->attributes)) { | |
| return nullptr; | |
| } | |
| for (auto* attr : str->attributes) { | |
| Mark(attr); | |
| } | |
| utils::Vector<const sem::StructMember*, 8> sem_members; | |
| sem_members.Reserve(str->members.Length()); | |
| // Calculate the effective size and alignment of each field, and the overall size of the | |
| // structure. For size, use the size attribute if provided, otherwise use the default size | |
| // for the type. For alignment, use the alignment attribute if provided, otherwise use the | |
| // default alignment for the member type. Diagnostic errors are raised if a basic rule is | |
| // violated. Validation of storage-class rules requires analyzing the actual variable usage | |
| // of the structure, and so is performed as part of the variable validation. | |
| uint64_t struct_size = 0; | |
| uint64_t struct_align = 1; | |
| utils::Hashmap<Symbol, const ast::StructMember*, 8> member_map; | |
| for (auto* member : str->members) { | |
| Mark(member); | |
| if (auto added = member_map.Add(member->symbol, member); !added) { | |
| AddError("redefinition of '" + builder_->Symbols().NameFor(member->symbol) + "'", | |
| member->source); | |
| AddNote("previous definition is here", (*added.value)->source); | |
| return nullptr; | |
| } | |
| // Resolve member type | |
| auto* type = Type(member->type); | |
| if (!type) { | |
| return nullptr; | |
| } | |
| // validator_.Validate member type | |
| if (!validator_.IsPlain(type)) { | |
| AddError(sem_.TypeNameOf(type) + " cannot be used as the type of a structure member", | |
| member->source); | |
| return nullptr; | |
| } | |
| uint64_t offset = struct_size; | |
| uint64_t align = type->Align(); | |
| uint64_t size = type->Size(); | |
| if (!validator_.NoDuplicateAttributes(member->attributes)) { | |
| return nullptr; | |
| } | |
| bool has_offset_attr = false; | |
| bool has_align_attr = false; | |
| bool has_size_attr = false; | |
| std::optional<uint32_t> location; | |
| for (auto* attr : member->attributes) { | |
| Mark(attr); | |
| bool ok = Switch( | |
| attr, // | |
| [&](const ast::StructMemberOffsetAttribute* o) { | |
| // Offset attributes are not part of the WGSL spec, but are emitted | |
| // by the SPIR-V reader. | |
| ExprEvalStageConstraint constraint{sem::EvaluationStage::kConstant, | |
| "@offset value"}; | |
| TINT_SCOPED_ASSIGNMENT(expr_eval_stage_constraint_, constraint); | |
| auto* materialized = Materialize(Expression(o->expr)); | |
| if (!materialized) { | |
| return false; | |
| } | |
| auto const_value = materialized->ConstantValue(); | |
| if (!const_value) { | |
| AddError("@offset must be constant expression", o->expr->source); | |
| return false; | |
| } | |
| offset = const_value->ValueAs<uint64_t>(); | |
| if (offset < struct_size) { | |
| AddError("offsets must be in ascending order", o->source); | |
| return false; | |
| } | |
| has_offset_attr = true; | |
| return true; | |
| }, | |
| [&](const ast::StructMemberAlignAttribute* a) { | |
| ExprEvalStageConstraint constraint{sem::EvaluationStage::kConstant, "@align"}; | |
| TINT_SCOPED_ASSIGNMENT(expr_eval_stage_constraint_, constraint); | |
| auto* materialized = Materialize(Expression(a->expr)); | |
| if (!materialized) { | |
| return false; | |
| } | |
| if (!materialized->Type()->IsAnyOf<type::I32, type::U32>()) { | |
| AddError("@align must be an i32 or u32 value", a->source); | |
| return false; | |
| } | |
| auto const_value = materialized->ConstantValue(); | |
| if (!const_value) { | |
| AddError("@align must be constant expression", a->source); | |
| return false; | |
| } | |
| auto value = const_value->ValueAs<AInt>(); | |
| if (value <= 0 || !utils::IsPowerOfTwo(value)) { | |
| AddError("@align value must be a positive, power-of-two integer", | |
| a->source); | |
| return false; | |
| } | |
| align = u32(value); | |
| has_align_attr = true; | |
| return true; | |
| }, | |
| [&](const ast::StructMemberSizeAttribute* s) { | |
| ExprEvalStageConstraint constraint{sem::EvaluationStage::kConstant, "@size"}; | |
| TINT_SCOPED_ASSIGNMENT(expr_eval_stage_constraint_, constraint); | |
| auto* materialized = Materialize(Expression(s->expr)); | |
| if (!materialized) { | |
| return false; | |
| } | |
| if (!materialized->Type()->IsAnyOf<type::U32, type::I32>()) { | |
| AddError("@size must be an i32 or u32 value", s->source); | |
| return false; | |
| } | |
| auto const_value = materialized->ConstantValue(); | |
| if (!const_value) { | |
| AddError("@size must be constant expression", s->expr->source); | |
| return false; | |
| } | |
| { | |
| auto value = const_value->ValueAs<AInt>(); | |
| if (value <= 0) { | |
| AddError("@size must be a positive integer", s->source); | |
| return false; | |
| } | |
| } | |
| auto value = const_value->ValueAs<uint64_t>(); | |
| if (value < size) { | |
| AddError("@size must be at least as big as the type's size (" + | |
| std::to_string(size) + ")", | |
| s->source); | |
| return false; | |
| } | |
| size = u32(value); | |
| has_size_attr = true; | |
| return true; | |
| }, | |
| [&](const ast::LocationAttribute* loc_attr) { | |
| auto value = LocationAttribute(loc_attr); | |
| if (!value) { | |
| return false; | |
| } | |
| location = value.Get(); | |
| return true; | |
| }, | |
| [&](Default) { | |
| // The validator will check attributes can be applied to the struct member. | |
| return true; | |
| }); | |
| if (!ok) { | |
| return nullptr; | |
| } | |
| } | |
| if (has_offset_attr && (has_align_attr || has_size_attr)) { | |
| AddError("@offset cannot be used with @align or @size", member->source); | |
| return nullptr; | |
| } | |
| offset = utils::RoundUp(align, offset); | |
| if (offset > std::numeric_limits<uint32_t>::max()) { | |
| std::stringstream msg; | |
| msg << "struct member offset (0x" << std::hex << offset << ") must not exceed 0x" | |
| << std::hex << std::numeric_limits<uint32_t>::max() << " bytes"; | |
| AddError(msg.str(), member->source); | |
| return nullptr; | |
| } | |
| auto* sem_member = builder_->create<sem::StructMember>( | |
| member, member->source, member->symbol, type, | |
| static_cast<uint32_t>(sem_members.Length()), static_cast<uint32_t>(offset), | |
| static_cast<uint32_t>(align), static_cast<uint32_t>(size), location); | |
| builder_->Sem().Add(member, sem_member); | |
| sem_members.Push(sem_member); | |
| struct_size = offset + size; | |
| struct_align = std::max(struct_align, align); | |
| } | |
| uint64_t size_no_padding = struct_size; | |
| struct_size = utils::RoundUp(struct_align, struct_size); | |
| if (struct_size > std::numeric_limits<uint32_t>::max()) { | |
| std::stringstream msg; | |
| msg << "struct size (0x" << std::hex << struct_size << ") must not exceed 0xffffffff bytes"; | |
| AddError(msg.str(), str->source); | |
| return nullptr; | |
| } | |
| if (struct_align > std::numeric_limits<uint32_t>::max()) { | |
| TINT_ICE(Resolver, diagnostics_) << "calculated struct stride exceeds uint32"; | |
| return nullptr; | |
| } | |
| auto* out = builder_->create<sem::Struct>( | |
| str, str->source, str->name, std::move(sem_members), static_cast<uint32_t>(struct_align), | |
| static_cast<uint32_t>(struct_size), static_cast<uint32_t>(size_no_padding)); | |
| for (size_t i = 0; i < sem_members.Length(); i++) { | |
| auto* mem_type = sem_members[i]->Type(); | |
| if (mem_type->Is<type::Atomic>()) { | |
| atomic_composite_info_.Add(out, &sem_members[i]->Source()); | |
| break; | |
| } else { | |
| if (auto found = atomic_composite_info_.Get(mem_type)) { | |
| atomic_composite_info_.Add(out, *found); | |
| break; | |
| } | |
| } | |
| const_cast<sem::StructMember*>(sem_members[i])->SetStruct(out); | |
| } | |
| auto stage = current_function_ ? current_function_->Declaration()->PipelineStage() | |
| : ast::PipelineStage::kNone; | |
| if (!validator_.Structure(out, stage)) { | |
| return nullptr; | |
| } | |
| return out; | |
| } | |
| sem::Statement* Resolver::ReturnStatement(const ast::ReturnStatement* stmt) { | |
| auto* sem = | |
| builder_->create<sem::Statement>(stmt, current_compound_statement_, current_function_); | |
| return StatementScope(stmt, sem, [&] { | |
| auto& behaviors = current_statement_->Behaviors(); | |
| behaviors = sem::Behavior::kReturn; | |
| const type::Type* value_ty = nullptr; | |
| if (auto* value = stmt->value) { | |
| const auto* expr = Load(Expression(value)); | |
| if (!expr) { | |
| return false; | |
| } | |
| if (auto* ret_ty = current_function_->ReturnType(); !ret_ty->Is<type::Void>()) { | |
| expr = Materialize(expr, ret_ty); | |
| if (!expr) { | |
| return false; | |
| } | |
| } | |
| behaviors.Add(expr->Behaviors() - sem::Behavior::kNext); | |
| value_ty = expr->Type(); | |
| } else { | |
| value_ty = builder_->create<type::Void>(); | |
| } | |
| // Validate after processing the return value expression so that its type | |
| // is available for validation. | |
| return validator_.Return(stmt, current_function_->ReturnType(), value_ty, | |
| current_statement_); | |
| }); | |
| } | |
| sem::SwitchStatement* Resolver::SwitchStatement(const ast::SwitchStatement* stmt) { | |
| auto* sem = builder_->create<sem::SwitchStatement>(stmt, current_compound_statement_, | |
| current_function_); | |
| return StatementScope(stmt, sem, [&] { | |
| auto& behaviors = sem->Behaviors(); | |
| const auto* cond = Load(Expression(stmt->condition)); | |
| if (!cond) { | |
| return false; | |
| } | |
| behaviors = cond->Behaviors() - sem::Behavior::kNext; | |
| auto* cond_ty = cond->Type(); | |
| // Determine the common type across all selectors and the switch expression | |
| // This must materialize to an integer scalar (non-abstract). | |
| utils::Vector<const type::Type*, 8> types; | |
| types.Push(cond_ty); | |
| for (auto* case_stmt : stmt->body) { | |
| for (auto* sel : case_stmt->selectors) { | |
| if (sel->IsDefault()) { | |
| continue; | |
| } | |
| auto* sem_expr = Expression(sel->expr); | |
| if (!sem_expr) { | |
| return false; | |
| } | |
| types.Push(sem_expr->Type()->UnwrapRef()); | |
| } | |
| } | |
| auto* common_ty = type::Type::Common(types); | |
| if (!common_ty || !common_ty->is_integer_scalar()) { | |
| // No common type found or the common type was abstract. | |
| // Pick i32 and let validation deal with any mismatches. | |
| common_ty = builder_->create<type::I32>(); | |
| } | |
| cond = Materialize(cond, common_ty); | |
| if (!cond) { | |
| return false; | |
| } | |
| utils::Vector<sem::CaseStatement*, 4> cases; | |
| cases.Reserve(stmt->body.Length()); | |
| for (auto* case_stmt : stmt->body) { | |
| Mark(case_stmt); | |
| auto* c = CaseStatement(case_stmt, common_ty); | |
| if (!c) { | |
| return false; | |
| } | |
| cases.Push(c); | |
| behaviors.Add(c->Behaviors()); | |
| sem->Cases().emplace_back(c); | |
| } | |
| if (behaviors.Contains(sem::Behavior::kBreak)) { | |
| behaviors.Add(sem::Behavior::kNext); | |
| } | |
| behaviors.Remove(sem::Behavior::kBreak); | |
| return validator_.SwitchStatement(stmt); | |
| }); | |
| } | |
| sem::Statement* Resolver::VariableDeclStatement(const ast::VariableDeclStatement* stmt) { | |
| auto* sem = | |
| builder_->create<sem::Statement>(stmt, current_compound_statement_, current_function_); | |
| return StatementScope(stmt, sem, [&] { | |
| Mark(stmt->variable); | |
| auto* variable = Variable(stmt->variable, /* is_global */ false); | |
| if (!variable) { | |
| return false; | |
| } | |
| for (auto* attr : stmt->variable->attributes) { | |
| Mark(attr); | |
| if (!attr->Is<ast::InternalAttribute>()) { | |
| AddError("attributes are not valid on local variables", attr->source); | |
| return false; | |
| } | |
| } | |
| current_compound_statement_->AddDecl(variable->As<sem::LocalVariable>()); | |
| if (auto* ctor = variable->Initializer()) { | |
| sem->Behaviors() = ctor->Behaviors(); | |
| } | |
| return validator_.LocalVariable(variable); | |
| }); | |
| } | |
| sem::Statement* Resolver::AssignmentStatement(const ast::AssignmentStatement* stmt) { | |
| auto* sem = | |
| builder_->create<sem::Statement>(stmt, current_compound_statement_, current_function_); | |
| return StatementScope(stmt, sem, [&] { | |
| auto* lhs = Expression(stmt->lhs); | |
| if (!lhs) { | |
| return false; | |
| } | |
| const bool is_phony_assignment = stmt->lhs->Is<ast::PhonyExpression>(); | |
| const auto* rhs = Expression(stmt->rhs); | |
| if (!rhs) { | |
| return false; | |
| } | |
| if (!is_phony_assignment) { | |
| rhs = Materialize(rhs, lhs->Type()->UnwrapRef()); | |
| if (!rhs) { | |
| return false; | |
| } | |
| } | |
| rhs = Load(rhs); | |
| if (!rhs) { | |
| return false; | |
| } | |
| auto& behaviors = sem->Behaviors(); | |
| behaviors = rhs->Behaviors(); | |
| if (!is_phony_assignment) { | |
| behaviors.Add(lhs->Behaviors()); | |
| } | |
| if (!is_phony_assignment) { | |
| RegisterStore(lhs); | |
| } | |
| return validator_.Assignment(stmt, sem_.TypeOf(stmt->rhs)); | |
| }); | |
| } | |
| sem::Statement* Resolver::BreakStatement(const ast::BreakStatement* stmt) { | |
| auto* sem = | |
| builder_->create<sem::Statement>(stmt, current_compound_statement_, current_function_); | |
| return StatementScope(stmt, sem, [&] { | |
| sem->Behaviors() = sem::Behavior::kBreak; | |
| return validator_.BreakStatement(sem, current_statement_); | |
| }); | |
| } | |
| sem::Statement* Resolver::BreakIfStatement(const ast::BreakIfStatement* stmt) { | |
| auto* sem = builder_->create<sem::BreakIfStatement>(stmt, current_compound_statement_, | |
| current_function_); | |
| return StatementScope(stmt, sem, [&] { | |
| auto* cond = Load(Expression(stmt->condition)); | |
| if (!cond) { | |
| return false; | |
| } | |
| sem->SetCondition(cond); | |
| sem->Behaviors() = cond->Behaviors(); | |
| sem->Behaviors().Add(sem::Behavior::kBreak); | |
| return validator_.BreakIfStatement(sem, current_statement_); | |
| }); | |
| } | |
| sem::Statement* Resolver::CallStatement(const ast::CallStatement* stmt) { | |
| auto* sem = | |
| builder_->create<sem::Statement>(stmt, current_compound_statement_, current_function_); | |
| return StatementScope(stmt, sem, [&] { | |
| if (auto* expr = Expression(stmt->expr)) { | |
| sem->Behaviors() = expr->Behaviors(); | |
| return true; | |
| } | |
| return false; | |
| }); | |
| } | |
| sem::Statement* Resolver::CompoundAssignmentStatement( | |
| const ast::CompoundAssignmentStatement* stmt) { | |
| auto* sem = | |
| builder_->create<sem::Statement>(stmt, current_compound_statement_, current_function_); | |
| return StatementScope(stmt, sem, [&] { | |
| auto* lhs = Expression(stmt->lhs); | |
| if (!lhs) { | |
| return false; | |
| } | |
| auto* rhs = Load(Expression(stmt->rhs)); | |
| if (!rhs) { | |
| return false; | |
| } | |
| RegisterStore(lhs); | |
| sem->Behaviors() = rhs->Behaviors() + lhs->Behaviors(); | |
| auto* lhs_ty = lhs->Type()->UnwrapRef(); | |
| auto* rhs_ty = rhs->Type()->UnwrapRef(); | |
| auto stage = sem::EarliestStage(lhs->Stage(), rhs->Stage()); | |
| auto* ty = | |
| intrinsic_table_->Lookup(stmt->op, lhs_ty, rhs_ty, stage, stmt->source, true).result; | |
| if (!ty) { | |
| return false; | |
| } | |
| return validator_.Assignment(stmt, ty); | |
| }); | |
| } | |
| sem::Statement* Resolver::ContinueStatement(const ast::ContinueStatement* stmt) { | |
| auto* sem = | |
| builder_->create<sem::Statement>(stmt, current_compound_statement_, current_function_); | |
| return StatementScope(stmt, sem, [&] { | |
| sem->Behaviors() = sem::Behavior::kContinue; | |
| // Set if we've hit the first continue statement in our parent loop | |
| if (auto* block = sem->FindFirstParent<sem::LoopBlockStatement>()) { | |
| if (!block->FirstContinue()) { | |
| const_cast<sem::LoopBlockStatement*>(block)->SetFirstContinue( | |
| stmt, block->Decls().Count()); | |
| } | |
| } | |
| return validator_.ContinueStatement(sem, current_statement_); | |
| }); | |
| } | |
| sem::Statement* Resolver::DiscardStatement(const ast::DiscardStatement* stmt) { | |
| auto* sem = | |
| builder_->create<sem::Statement>(stmt, current_compound_statement_, current_function_); | |
| return StatementScope(stmt, sem, [&] { | |
| current_function_->SetDiscardStatement(sem); | |
| return true; | |
| }); | |
| } | |
| sem::Statement* Resolver::IncrementDecrementStatement( | |
| const ast::IncrementDecrementStatement* stmt) { | |
| auto* sem = | |
| builder_->create<sem::Statement>(stmt, current_compound_statement_, current_function_); | |
| return StatementScope(stmt, sem, [&] { | |
| auto* lhs = Expression(stmt->lhs); | |
| if (!lhs) { | |
| return false; | |
| } | |
| sem->Behaviors() = lhs->Behaviors(); | |
| RegisterStore(lhs); | |
| return validator_.IncrementDecrementStatement(stmt); | |
| }); | |
| } | |
| bool Resolver::ApplyAddressSpaceUsageToType(ast::AddressSpace address_space, | |
| type::Type* ty, | |
| const Source& usage) { | |
| ty = const_cast<type::Type*>(ty->UnwrapRef()); | |
| if (auto* str = ty->As<sem::Struct>()) { | |
| if (str->AddressSpaceUsage().count(address_space)) { | |
| return true; // Already applied | |
| } | |
| str->AddUsage(address_space); | |
| for (auto* member : str->Members()) { | |
| auto decl = member->Declaration(); | |
| if (decl && | |
| !ApplyAddressSpaceUsageToType( | |
| address_space, const_cast<type::Type*>(member->Type()), decl->type->source)) { | |
| std::stringstream err; | |
| err << "while analyzing structure member " << sem_.TypeNameOf(str) << "." | |
| << builder_->Symbols().NameFor(member->Name()); | |
| AddNote(err.str(), member->Source()); | |
| return false; | |
| } | |
| } | |
| return true; | |
| } | |
| if (auto* arr = ty->As<type::Array>()) { | |
| if (address_space != ast::AddressSpace::kStorage) { | |
| if (arr->Count()->Is<type::RuntimeArrayCount>()) { | |
| AddError("runtime-sized arrays can only be used in the <storage> address space", | |
| usage); | |
| return false; | |
| } | |
| auto count = arr->ConstantCount(); | |
| if (count.has_value() && count.value() >= kMaxArrayElementCount) { | |
| AddError("array count (" + std::to_string(count.value()) + ") must be less than " + | |
| std::to_string(kMaxArrayElementCount), | |
| usage); | |
| return false; | |
| } | |
| } | |
| return ApplyAddressSpaceUsageToType(address_space, const_cast<type::Type*>(arr->ElemType()), | |
| usage); | |
| } | |
| if (ast::IsHostShareable(address_space) && !validator_.IsHostShareable(ty)) { | |
| std::stringstream err; | |
| err << "Type '" << sem_.TypeNameOf(ty) << "' cannot be used in address space '" | |
| << address_space << "' as it is non-host-shareable"; | |
| AddError(err.str(), usage); | |
| return false; | |
| } | |
| return true; | |
| } | |
| template <typename SEM, typename F> | |
| SEM* Resolver::StatementScope(const ast::Statement* ast, SEM* sem, F&& callback) { | |
| builder_->Sem().Add(ast, sem); | |
| auto* as_compound = As<sem::CompoundStatement, CastFlags::kDontErrorOnImpossibleCast>(sem); | |
| TINT_SCOPED_ASSIGNMENT(current_statement_, sem); | |
| TINT_SCOPED_ASSIGNMENT(current_compound_statement_, | |
| as_compound ? as_compound : current_compound_statement_); | |
| TINT_SCOPED_ASSIGNMENT(current_scoping_depth_, current_scoping_depth_ + 1); | |
| if (current_scoping_depth_ > kMaxStatementDepth) { | |
| AddError("statement nesting depth / chaining length exceeds limit of " + | |
| std::to_string(kMaxStatementDepth), | |
| ast->source); | |
| return nullptr; | |
| } | |
| if (!callback()) { | |
| return nullptr; | |
| } | |
| return sem; | |
| } | |
| bool Resolver::Mark(const ast::Node* node) { | |
| if (node == nullptr) { | |
| TINT_ICE(Resolver, diagnostics_) << "Resolver::Mark() called with nullptr"; | |
| return false; | |
| } | |
| auto marked_bit_ref = marked_[node->node_id.value]; | |
| if (!marked_bit_ref) { | |
| marked_bit_ref = true; | |
| return true; | |
| } | |
| TINT_ICE(Resolver, diagnostics_) << "AST node '" << node->TypeInfo().name | |
| << "' was encountered twice in the same AST of a Program\n" | |
| << "At: " << node->source << "\n" | |
| << "Pointer: " << node; | |
| return false; | |
| } | |
| void Resolver::AddError(const std::string& msg, const Source& source) const { | |
| diagnostics_.add_error(diag::System::Resolver, msg, source); | |
| } | |
| void Resolver::AddWarning(const std::string& msg, const Source& source) const { | |
| diagnostics_.add_warning(diag::System::Resolver, msg, source); | |
| } | |
| void Resolver::AddNote(const std::string& msg, const Source& source) const { | |
| diagnostics_.add_note(diag::System::Resolver, msg, source); | |
| } | |
| bool Resolver::IsBuiltin(Symbol symbol) const { | |
| std::string name = builder_->Symbols().NameFor(symbol); | |
| return sem::ParseBuiltinType(name) != sem::BuiltinType::kNone; | |
| } | |
| } // namespace tint::resolver |