blob: dc45bc0f88692c354d0742f3209edf7d896cad19 [file] [log] [blame] [edit]
// Copyright 2017 The Dawn Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <gmock/gmock.h>
#include "dawn/native/CommandEncoder.h"
#include "dawn/tests/unittests/validation/ValidationTest.h"
#include "dawn/utils/WGPUHelpers.h"
using ::testing::HasSubstr;
class CommandBufferValidationTest : public ValidationTest {};
// Test for an empty command buffer
TEST_F(CommandBufferValidationTest, Empty) {
device.CreateCommandEncoder().Finish();
}
// Test that a command buffer cannot be ended mid render pass
TEST_F(CommandBufferValidationTest, EndedMidRenderPass) {
PlaceholderRenderPass placeholderRenderPass(device);
// Control case, command buffer ended after the pass is ended.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&placeholderRenderPass);
pass.End();
encoder.Finish();
}
// Error case, command buffer ended mid-pass.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&placeholderRenderPass);
ASSERT_DEVICE_ERROR(
encoder.Finish(),
HasSubstr("Command buffer recording ended before [RenderPassEncoder] was ended."));
}
// Error case, command buffer ended mid-pass. Trying to use encoders after Finish
// should fail too.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&placeholderRenderPass);
ASSERT_DEVICE_ERROR(
encoder.Finish(),
HasSubstr("Command buffer recording ended before [RenderPassEncoder] was ended."));
ASSERT_DEVICE_ERROR(
pass.End(), HasSubstr("Recording in an error or already ended [RenderPassEncoder]."));
}
}
// Test that a command buffer cannot be ended mid compute pass
TEST_F(CommandBufferValidationTest, EndedMidComputePass) {
// Control case, command buffer ended after the pass is ended.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
pass.End();
encoder.Finish();
}
// Error case, command buffer ended mid-pass.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
ASSERT_DEVICE_ERROR(
encoder.Finish(),
HasSubstr("Command buffer recording ended before [ComputePassEncoder] was ended."));
}
// Error case, command buffer ended mid-pass. Trying to use encoders after Finish
// should fail too.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
ASSERT_DEVICE_ERROR(
encoder.Finish(),
HasSubstr("Command buffer recording ended before [ComputePassEncoder] was ended."));
ASSERT_DEVICE_ERROR(
pass.End(), HasSubstr("Recording in an error or already ended [ComputePassEncoder]."));
}
}
// Test that a render pass cannot be ended twice
TEST_F(CommandBufferValidationTest, RenderPassEndedTwice) {
PlaceholderRenderPass placeholderRenderPass(device);
// Control case, pass is ended once
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&placeholderRenderPass);
pass.End();
encoder.Finish();
}
// Error case, pass ended twice
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&placeholderRenderPass);
pass.End();
pass.End();
ASSERT_DEVICE_ERROR(
encoder.Finish(),
HasSubstr("Recording in an error or already ended [RenderPassEncoder]."));
}
}
// Test that a compute pass cannot be ended twice
TEST_F(CommandBufferValidationTest, ComputePassEndedTwice) {
// Control case, pass is ended once.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
pass.End();
encoder.Finish();
}
// Error case, pass ended twice
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
pass.End();
pass.End();
ASSERT_DEVICE_ERROR(
encoder.Finish(),
HasSubstr("Recording in an error or already ended [ComputePassEncoder]."));
}
}
// Test that beginning a compute pass before ending the previous pass causes an error.
TEST_F(CommandBufferValidationTest, BeginComputePassBeforeEndPreviousPass) {
PlaceholderRenderPass placeholderRenderPass(device);
// Beginning a compute pass before ending a render pass causes an error.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::RenderPassEncoder renderPass = encoder.BeginRenderPass(&placeholderRenderPass);
wgpu::ComputePassEncoder computePass = encoder.BeginComputePass();
computePass.End();
renderPass.End();
ASSERT_DEVICE_ERROR(encoder.Finish());
}
// Beginning a compute pass before ending a compute pass causes an error.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::ComputePassEncoder computePass1 = encoder.BeginComputePass();
wgpu::ComputePassEncoder computePass2 = encoder.BeginComputePass();
computePass2.End();
computePass1.End();
ASSERT_DEVICE_ERROR(encoder.Finish());
}
}
// Test that beginning a render pass before ending the previous pass causes an error.
TEST_F(CommandBufferValidationTest, BeginRenderPassBeforeEndPreviousPass) {
PlaceholderRenderPass placeholderRenderPass(device);
// Beginning a render pass before ending the render pass causes an error.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::RenderPassEncoder renderPass1 = encoder.BeginRenderPass(&placeholderRenderPass);
wgpu::RenderPassEncoder renderPass2 = encoder.BeginRenderPass(&placeholderRenderPass);
renderPass2.End();
renderPass1.End();
ASSERT_DEVICE_ERROR(encoder.Finish());
}
// Beginning a compute pass before ending a compute pass causes an error.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::ComputePassEncoder computePass = encoder.BeginComputePass();
wgpu::RenderPassEncoder renderPass = encoder.BeginRenderPass(&placeholderRenderPass);
renderPass.End();
computePass.End();
ASSERT_DEVICE_ERROR(encoder.Finish());
}
}
// Test that encoding command after a successful finish produces an error
TEST_F(CommandBufferValidationTest, CallsAfterASuccessfulFinish) {
// A buffer that can be used in CopyBufferToBuffer
wgpu::BufferDescriptor copyBufferDesc;
copyBufferDesc.size = 16;
copyBufferDesc.usage = wgpu::BufferUsage::CopySrc | wgpu::BufferUsage::CopyDst;
wgpu::Buffer copyBuffer = device.CreateBuffer(&copyBufferDesc);
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
encoder.Finish();
ASSERT_DEVICE_ERROR(encoder.CopyBufferToBuffer(copyBuffer, 0, copyBuffer, 0, 0));
}
// Test that encoding command after a failed finish produces an error
TEST_F(CommandBufferValidationTest, CallsAfterAFailedFinish) {
// A buffer that can be used in CopyBufferToBuffer
wgpu::BufferDescriptor copyBufferDesc;
copyBufferDesc.size = 16;
copyBufferDesc.usage = wgpu::BufferUsage::CopySrc | wgpu::BufferUsage::CopyDst;
wgpu::Buffer copyBuffer = device.CreateBuffer(&copyBufferDesc);
// A buffer that can't be used in CopyBufferToBuffer
wgpu::BufferDescriptor bufferDesc;
bufferDesc.size = 16;
bufferDesc.usage = wgpu::BufferUsage::Uniform;
wgpu::Buffer buffer = device.CreateBuffer(&bufferDesc);
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
encoder.CopyBufferToBuffer(buffer, 0, buffer, 0, 0);
ASSERT_DEVICE_ERROR(encoder.Finish());
ASSERT_DEVICE_ERROR(encoder.CopyBufferToBuffer(copyBuffer, 0, copyBuffer, 0, 0));
}
// Test that passes which are de-referenced prior to ending still allow the correct errors to be
// produced.
TEST_F(CommandBufferValidationTest, PassDereferenced) {
PlaceholderRenderPass placeholderRenderPass(device);
// Control case, command buffer ended after the pass is ended.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&placeholderRenderPass);
pass.End();
encoder.Finish();
}
// Error case, no reference is kept to a render pass.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
encoder.BeginRenderPass(&placeholderRenderPass);
ASSERT_DEVICE_ERROR(
encoder.Finish(),
HasSubstr("Command buffer recording ended before [RenderPassEncoder] was ended."));
}
// Error case, no reference is kept to a compute pass.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
encoder.BeginComputePass();
ASSERT_DEVICE_ERROR(
encoder.Finish(),
HasSubstr("Command buffer recording ended before [ComputePassEncoder] was ended."));
}
// Error case, beginning a new pass after failing to end a de-referenced pass.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
encoder.BeginRenderPass(&placeholderRenderPass);
wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
pass.End();
ASSERT_DEVICE_ERROR(
encoder.Finish(),
HasSubstr("Command buffer recording ended before [RenderPassEncoder] was ended."));
}
// Error case, deleting the pass after finishing the command encoder shouldn't generate an
// uncaptured error.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::ComputePassEncoder pass = encoder.BeginComputePass();
ASSERT_DEVICE_ERROR(
encoder.Finish(),
HasSubstr("Command buffer recording ended before [ComputePassEncoder] was ended."));
pass = nullptr;
}
// Valid case, command encoder is never finished so the de-referenced pass shouldn't
// generate an uncaptured error.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
encoder.BeginComputePass();
}
}
// Test that calling inject validation error produces an error.
TEST_F(CommandBufferValidationTest, InjectValidationError) {
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
encoder.InjectValidationError("my error");
ASSERT_DEVICE_ERROR(encoder.Finish(), HasSubstr("my error"));
}
TEST_F(CommandBufferValidationTest, DestroyEncoder) {
// Skip these tests if we are using wire because the destroy functionality is not exposed
// and needs to use a cast to call manually. We cannot test this in the wire case since the
// only way to trigger the destroy call is by losing all references which means we cannot
// call finish.
DAWN_SKIP_TEST_IF(UsesWire());
PlaceholderRenderPass placeholderRenderPass(device);
// Control case, command buffer ended after the pass is ended.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&placeholderRenderPass);
pass.End();
encoder.Finish();
}
// Destroyed encoder with encoded commands should emit error on finish.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&placeholderRenderPass);
pass.End();
dawn::native::FromAPI(encoder.Get())->Destroy();
ASSERT_DEVICE_ERROR(encoder.Finish(), HasSubstr("Destroyed encoder cannot be finished."));
}
// Destroyed encoder with encoded commands shouldn't emit an error if never finished.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&placeholderRenderPass);
pass.End();
dawn::native::FromAPI(encoder.Get())->Destroy();
}
// Destroyed encoder should allow encoding, and emit error on finish.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
dawn::native::FromAPI(encoder.Get())->Destroy();
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&placeholderRenderPass);
pass.End();
ASSERT_DEVICE_ERROR(encoder.Finish(), HasSubstr("Destroyed encoder cannot be finished."));
}
// Destroyed encoder should allow encoding and shouldn't emit an error if never finished.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
dawn::native::FromAPI(encoder.Get())->Destroy();
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&placeholderRenderPass);
pass.End();
}
// Destroying a finished encoder should not emit any errors.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&placeholderRenderPass);
pass.End();
encoder.Finish();
dawn::native::FromAPI(encoder.Get())->Destroy();
}
// Destroying an encoder twice should not emit any errors.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
dawn::native::FromAPI(encoder.Get())->Destroy();
dawn::native::FromAPI(encoder.Get())->Destroy();
}
// Destroying an encoder twice and then calling finish should fail.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
dawn::native::FromAPI(encoder.Get())->Destroy();
dawn::native::FromAPI(encoder.Get())->Destroy();
ASSERT_DEVICE_ERROR(encoder.Finish(), HasSubstr("Destroyed encoder cannot be finished."));
}
}
TEST_F(CommandBufferValidationTest, EncodeAfterDeviceDestroyed) {
PlaceholderRenderPass placeholderRenderPass(device);
// Device destroyed before encoding.
{
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
ExpectDeviceDestruction();
device.Destroy();
// The encoder should not accessing any device info if device is destroyed when try
// encoding.
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&placeholderRenderPass);
pass.End();
ASSERT_DEVICE_ERROR(encoder.Finish(), HasSubstr("Destroyed encoder cannot be finished."));
}
// Device destroyed after encoding.
{
ExpectDeviceDestruction();
device.Destroy();
ASSERT_DEVICE_ERROR(wgpu::CommandEncoder encoder = device.CreateCommandEncoder(),
HasSubstr("[Device] is lost"));
// The encoder should not accessing any device info if device is destroyed when try
// encoding.
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&placeholderRenderPass);
pass.End();
ASSERT_DEVICE_ERROR(encoder.Finish(), HasSubstr("[Invalid CommandEncoder] is invalid."));
}
}