| // Copyright 2020 The Tint Authors. // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "src/tint/writer/spirv/builder.h" |
| |
| #include <algorithm> |
| #include <limits> |
| #include <utility> |
| |
| #include "spirv/unified1/GLSL.std.450.h" |
| #include "src/tint/ast/call_statement.h" |
| #include "src/tint/ast/id_attribute.h" |
| #include "src/tint/ast/internal_attribute.h" |
| #include "src/tint/ast/traverse_expressions.h" |
| #include "src/tint/constant/value.h" |
| #include "src/tint/sem/builtin.h" |
| #include "src/tint/sem/call.h" |
| #include "src/tint/sem/function.h" |
| #include "src/tint/sem/load.h" |
| #include "src/tint/sem/materialize.h" |
| #include "src/tint/sem/member_accessor_expression.h" |
| #include "src/tint/sem/module.h" |
| #include "src/tint/sem/statement.h" |
| #include "src/tint/sem/struct.h" |
| #include "src/tint/sem/switch_statement.h" |
| #include "src/tint/sem/value_constructor.h" |
| #include "src/tint/sem/value_conversion.h" |
| #include "src/tint/sem/variable.h" |
| #include "src/tint/transform/add_block_attribute.h" |
| #include "src/tint/type/array.h" |
| #include "src/tint/type/atomic.h" |
| #include "src/tint/type/depth_multisampled_texture.h" |
| #include "src/tint/type/depth_texture.h" |
| #include "src/tint/type/multisampled_texture.h" |
| #include "src/tint/type/reference.h" |
| #include "src/tint/type/sampled_texture.h" |
| #include "src/tint/type/texture_dimension.h" |
| #include "src/tint/type/vector.h" |
| #include "src/tint/utils/compiler_macros.h" |
| #include "src/tint/utils/defer.h" |
| #include "src/tint/utils/map.h" |
| #include "src/tint/utils/string_stream.h" |
| #include "src/tint/writer/append_vector.h" |
| #include "src/tint/writer/check_supported_extensions.h" |
| |
| namespace tint::writer::spirv { |
| namespace { |
| |
| const char kGLSLstd450[] = "GLSL.std.450"; |
| |
| uint32_t size_of(const InstructionList& instructions) { |
| uint32_t size = 0; |
| for (const auto& inst : instructions) { |
| size += inst.word_length(); |
| } |
| |
| return size; |
| } |
| |
| uint32_t pipeline_stage_to_execution_model(ast::PipelineStage stage) { |
| SpvExecutionModel model = SpvExecutionModelVertex; |
| |
| switch (stage) { |
| case ast::PipelineStage::kFragment: |
| model = SpvExecutionModelFragment; |
| break; |
| case ast::PipelineStage::kVertex: |
| model = SpvExecutionModelVertex; |
| break; |
| case ast::PipelineStage::kCompute: |
| model = SpvExecutionModelGLCompute; |
| break; |
| case ast::PipelineStage::kNone: |
| model = SpvExecutionModelMax; |
| break; |
| } |
| return model; |
| } |
| |
| /// Returns the matrix type that is `type` or that is wrapped by |
| /// one or more levels of an arrays inside of `type`. |
| /// @param type the given type, which must not be null |
| /// @returns the nested matrix type, or nullptr if none |
| const type::Matrix* GetNestedMatrixType(const type::Type* type) { |
| while (auto* arr = type->As<type::Array>()) { |
| type = arr->ElemType(); |
| } |
| return type->As<type::Matrix>(); |
| } |
| |
| uint32_t builtin_to_glsl_method(const sem::Builtin* builtin) { |
| switch (builtin->Type()) { |
| case builtin::Function::kAcos: |
| return GLSLstd450Acos; |
| case builtin::Function::kAcosh: |
| return GLSLstd450Acosh; |
| case builtin::Function::kAsin: |
| return GLSLstd450Asin; |
| case builtin::Function::kAsinh: |
| return GLSLstd450Asinh; |
| case builtin::Function::kAtan: |
| return GLSLstd450Atan; |
| case builtin::Function::kAtan2: |
| return GLSLstd450Atan2; |
| case builtin::Function::kAtanh: |
| return GLSLstd450Atanh; |
| case builtin::Function::kCeil: |
| return GLSLstd450Ceil; |
| case builtin::Function::kClamp: |
| if (builtin->ReturnType()->is_float_scalar_or_vector()) { |
| return GLSLstd450NClamp; |
| } else if (builtin->ReturnType()->is_unsigned_integer_scalar_or_vector()) { |
| return GLSLstd450UClamp; |
| } else { |
| return GLSLstd450SClamp; |
| } |
| case builtin::Function::kCos: |
| return GLSLstd450Cos; |
| case builtin::Function::kCosh: |
| return GLSLstd450Cosh; |
| case builtin::Function::kCross: |
| return GLSLstd450Cross; |
| case builtin::Function::kDegrees: |
| return GLSLstd450Degrees; |
| case builtin::Function::kDeterminant: |
| return GLSLstd450Determinant; |
| case builtin::Function::kDistance: |
| return GLSLstd450Distance; |
| case builtin::Function::kExp: |
| return GLSLstd450Exp; |
| case builtin::Function::kExp2: |
| return GLSLstd450Exp2; |
| case builtin::Function::kFaceForward: |
| return GLSLstd450FaceForward; |
| case builtin::Function::kFloor: |
| return GLSLstd450Floor; |
| case builtin::Function::kFma: |
| return GLSLstd450Fma; |
| case builtin::Function::kFract: |
| return GLSLstd450Fract; |
| case builtin::Function::kFrexp: |
| return GLSLstd450FrexpStruct; |
| case builtin::Function::kInverseSqrt: |
| return GLSLstd450InverseSqrt; |
| case builtin::Function::kLdexp: |
| return GLSLstd450Ldexp; |
| case builtin::Function::kLength: |
| return GLSLstd450Length; |
| case builtin::Function::kLog: |
| return GLSLstd450Log; |
| case builtin::Function::kLog2: |
| return GLSLstd450Log2; |
| case builtin::Function::kMax: |
| if (builtin->ReturnType()->is_float_scalar_or_vector()) { |
| return GLSLstd450NMax; |
| } else if (builtin->ReturnType()->is_unsigned_integer_scalar_or_vector()) { |
| return GLSLstd450UMax; |
| } else { |
| return GLSLstd450SMax; |
| } |
| case builtin::Function::kMin: |
| if (builtin->ReturnType()->is_float_scalar_or_vector()) { |
| return GLSLstd450NMin; |
| } else if (builtin->ReturnType()->is_unsigned_integer_scalar_or_vector()) { |
| return GLSLstd450UMin; |
| } else { |
| return GLSLstd450SMin; |
| } |
| case builtin::Function::kMix: |
| return GLSLstd450FMix; |
| case builtin::Function::kModf: |
| return GLSLstd450ModfStruct; |
| case builtin::Function::kNormalize: |
| return GLSLstd450Normalize; |
| case builtin::Function::kPack4X8Snorm: |
| return GLSLstd450PackSnorm4x8; |
| case builtin::Function::kPack4X8Unorm: |
| return GLSLstd450PackUnorm4x8; |
| case builtin::Function::kPack2X16Snorm: |
| return GLSLstd450PackSnorm2x16; |
| case builtin::Function::kPack2X16Unorm: |
| return GLSLstd450PackUnorm2x16; |
| case builtin::Function::kPack2X16Float: |
| return GLSLstd450PackHalf2x16; |
| case builtin::Function::kPow: |
| return GLSLstd450Pow; |
| case builtin::Function::kRadians: |
| return GLSLstd450Radians; |
| case builtin::Function::kReflect: |
| return GLSLstd450Reflect; |
| case builtin::Function::kRefract: |
| return GLSLstd450Refract; |
| case builtin::Function::kRound: |
| return GLSLstd450RoundEven; |
| case builtin::Function::kSign: |
| if (builtin->ReturnType()->is_signed_integer_scalar_or_vector()) { |
| return GLSLstd450SSign; |
| } else { |
| return GLSLstd450FSign; |
| } |
| case builtin::Function::kSin: |
| return GLSLstd450Sin; |
| case builtin::Function::kSinh: |
| return GLSLstd450Sinh; |
| case builtin::Function::kSmoothstep: |
| return GLSLstd450SmoothStep; |
| case builtin::Function::kSqrt: |
| return GLSLstd450Sqrt; |
| case builtin::Function::kStep: |
| return GLSLstd450Step; |
| case builtin::Function::kTan: |
| return GLSLstd450Tan; |
| case builtin::Function::kTanh: |
| return GLSLstd450Tanh; |
| case builtin::Function::kTrunc: |
| return GLSLstd450Trunc; |
| case builtin::Function::kUnpack4X8Snorm: |
| return GLSLstd450UnpackSnorm4x8; |
| case builtin::Function::kUnpack4X8Unorm: |
| return GLSLstd450UnpackUnorm4x8; |
| case builtin::Function::kUnpack2X16Snorm: |
| return GLSLstd450UnpackSnorm2x16; |
| case builtin::Function::kUnpack2X16Unorm: |
| return GLSLstd450UnpackUnorm2x16; |
| case builtin::Function::kUnpack2X16Float: |
| return GLSLstd450UnpackHalf2x16; |
| default: |
| break; |
| } |
| return 0; |
| } |
| |
| /// @return the vector element type if ty is a vector, otherwise return ty. |
| const type::Type* ElementTypeOf(const type::Type* ty) { |
| if (auto* v = ty->As<type::Vector>()) { |
| return v->type(); |
| } |
| return ty; |
| } |
| |
| } // namespace |
| |
| Builder::AccessorInfo::AccessorInfo() : source_id(0), source_type(nullptr) {} |
| |
| Builder::AccessorInfo::~AccessorInfo() {} |
| |
| Builder::Builder(const Program* program, bool zero_initialize_workgroup_memory) |
| : builder_(ProgramBuilder::Wrap(program)), |
| scope_stack_{Scope{}}, |
| zero_initialize_workgroup_memory_(zero_initialize_workgroup_memory) {} |
| |
| Builder::~Builder() = default; |
| |
| bool Builder::Build() { |
| if (!CheckSupportedExtensions("SPIR-V", builder_.AST(), builder_.Diagnostics(), |
| utils::Vector{ |
| builtin::Extension::kChromiumDisableUniformityAnalysis, |
| builtin::Extension::kChromiumExperimentalDp4A, |
| builtin::Extension::kChromiumExperimentalFullPtrParameters, |
| builtin::Extension::kChromiumExperimentalPushConstant, |
| builtin::Extension::kF16, |
| })) { |
| error_ = builder_.Diagnostics().str(); |
| return false; |
| } |
| |
| push_capability(SpvCapabilityShader); |
| |
| push_memory_model(spv::Op::OpMemoryModel, |
| {U32Operand(SpvAddressingModelLogical), U32Operand(SpvMemoryModelGLSL450)}); |
| |
| for (auto ext : builder_.Sem().Module()->Extensions()) { |
| GenerateExtension(ext); |
| } |
| |
| for (auto* var : builder_.AST().GlobalVariables()) { |
| if (!GenerateGlobalVariable(var)) { |
| return false; |
| } |
| } |
| |
| auto* mod = builder_.Sem().Module(); |
| for (auto* decl : mod->DependencyOrderedDeclarations()) { |
| if (auto* func = decl->As<ast::Function>()) { |
| if (!GenerateFunction(func)) { |
| return false; |
| } |
| } |
| } |
| |
| return true; |
| } |
| |
| void Builder::RegisterVariable(const sem::Variable* var, uint32_t id) { |
| var_to_id_.emplace(var, id); |
| id_to_var_.emplace(id, var); |
| } |
| |
| uint32_t Builder::LookupVariableID(const sem::Variable* var) { |
| auto it = var_to_id_.find(var); |
| if (it == var_to_id_.end()) { |
| error_ = "unable to find ID for variable: " + |
| builder_.Symbols().NameFor(var->Declaration()->name->symbol); |
| return 0; |
| } |
| return it->second; |
| } |
| |
| void Builder::PushScope() { |
| // Push a new scope, by copying the top-most stack |
| scope_stack_.push_back(scope_stack_.back()); |
| } |
| |
| void Builder::PopScope() { |
| scope_stack_.pop_back(); |
| } |
| |
| Operand Builder::result_op() { |
| return Operand(next_id()); |
| } |
| |
| uint32_t Builder::total_size() const { |
| // The 5 covers the magic, version, generator, id bound and reserved. |
| uint32_t size = 5; |
| |
| size += size_of(capabilities_); |
| size += size_of(extensions_); |
| size += size_of(ext_imports_); |
| size += size_of(memory_model_); |
| size += size_of(entry_points_); |
| size += size_of(execution_modes_); |
| size += size_of(debug_); |
| size += size_of(annotations_); |
| size += size_of(types_); |
| for (const auto& func : functions_) { |
| size += func.word_length(); |
| } |
| |
| return size; |
| } |
| |
| void Builder::iterate(std::function<void(const Instruction&)> cb) const { |
| for (const auto& inst : capabilities_) { |
| cb(inst); |
| } |
| for (const auto& inst : extensions_) { |
| cb(inst); |
| } |
| for (const auto& inst : ext_imports_) { |
| cb(inst); |
| } |
| for (const auto& inst : memory_model_) { |
| cb(inst); |
| } |
| for (const auto& inst : entry_points_) { |
| cb(inst); |
| } |
| for (const auto& inst : execution_modes_) { |
| cb(inst); |
| } |
| for (const auto& inst : debug_) { |
| cb(inst); |
| } |
| for (const auto& inst : annotations_) { |
| cb(inst); |
| } |
| for (const auto& inst : types_) { |
| cb(inst); |
| } |
| for (const auto& func : functions_) { |
| func.iterate(cb); |
| } |
| } |
| |
| void Builder::push_capability(uint32_t cap) { |
| if (capability_set_.count(cap) == 0) { |
| capability_set_.insert(cap); |
| capabilities_.push_back(Instruction{spv::Op::OpCapability, {Operand(cap)}}); |
| } |
| } |
| |
| void Builder::push_extension(const char* extension) { |
| extensions_.push_back(Instruction{spv::Op::OpExtension, {Operand(extension)}}); |
| } |
| |
| bool Builder::GenerateExtension(builtin::Extension extension) { |
| switch (extension) { |
| case builtin::Extension::kChromiumExperimentalDp4A: |
| push_extension("SPV_KHR_integer_dot_product"); |
| push_capability(SpvCapabilityDotProductKHR); |
| push_capability(SpvCapabilityDotProductInput4x8BitPackedKHR); |
| break; |
| case builtin::Extension::kF16: |
| push_capability(SpvCapabilityFloat16); |
| push_capability(SpvCapabilityUniformAndStorageBuffer16BitAccess); |
| push_capability(SpvCapabilityStorageBuffer16BitAccess); |
| push_capability(SpvCapabilityStorageInputOutput16); |
| break; |
| default: |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool Builder::GenerateLabel(uint32_t id) { |
| if (!push_function_inst(spv::Op::OpLabel, {Operand(id)})) { |
| return false; |
| } |
| current_label_id_ = id; |
| return true; |
| } |
| |
| bool Builder::GenerateAssignStatement(const ast::AssignmentStatement* assign) { |
| if (assign->lhs->Is<ast::PhonyExpression>()) { |
| if (builder_.Sem().GetVal(assign->rhs)->ConstantValue()) { |
| // RHS of phony assignment is constant. |
| // Constants can't have side-effects, so just drop this. |
| return true; |
| } |
| auto rhs_id = GenerateExpression(assign->rhs); |
| if (rhs_id == 0) { |
| return false; |
| } |
| return true; |
| } else { |
| auto lhs_id = GenerateExpression(assign->lhs); |
| if (lhs_id == 0) { |
| return false; |
| } |
| auto rhs_id = GenerateExpression(assign->rhs); |
| if (rhs_id == 0) { |
| return false; |
| } |
| return GenerateStore(lhs_id, rhs_id); |
| } |
| } |
| |
| bool Builder::GenerateBreakStatement(const ast::BreakStatement*) { |
| if (merge_stack_.empty()) { |
| error_ = "Attempted to break without a merge block"; |
| return false; |
| } |
| if (!push_function_inst(spv::Op::OpBranch, {Operand(merge_stack_.back())})) { |
| return false; |
| } |
| return true; |
| } |
| |
| bool Builder::GenerateBreakIfStatement(const ast::BreakIfStatement* stmt) { |
| TINT_ASSERT(Writer, !backedge_stack_.empty()); |
| const auto cond_id = GenerateExpression(stmt->condition); |
| if (!cond_id) { |
| return false; |
| } |
| const ContinuingInfo& ci = continuing_stack_.back(); |
| backedge_stack_.back() = |
| Backedge(spv::Op::OpBranchConditional, |
| {Operand(cond_id), Operand(ci.break_target_id), Operand(ci.loop_header_id)}); |
| return true; |
| } |
| |
| bool Builder::GenerateContinueStatement(const ast::ContinueStatement*) { |
| if (continue_stack_.empty()) { |
| error_ = "Attempted to continue without a continue block"; |
| return false; |
| } |
| if (!push_function_inst(spv::Op::OpBranch, {Operand(continue_stack_.back())})) { |
| return false; |
| } |
| return true; |
| } |
| |
| // TODO(dsinclair): This is generating an OpKill but the semantics of kill |
| // haven't been defined for WGSL yet. So, this may need to change. |
| // https://github.com/gpuweb/gpuweb/issues/676 |
| bool Builder::GenerateDiscardStatement(const ast::DiscardStatement*) { |
| if (!push_function_inst(spv::Op::OpKill, {})) { |
| return false; |
| } |
| return true; |
| } |
| |
| bool Builder::GenerateEntryPoint(const ast::Function* func, uint32_t id) { |
| auto stage = pipeline_stage_to_execution_model(func->PipelineStage()); |
| if (stage == SpvExecutionModelMax) { |
| error_ = "Unknown pipeline stage provided"; |
| return false; |
| } |
| |
| OperandList operands = {Operand(stage), Operand(id), |
| Operand(builder_.Symbols().NameFor(func->name->symbol))}; |
| |
| auto* func_sem = builder_.Sem().Get(func); |
| for (const auto* var : func_sem->TransitivelyReferencedGlobals()) { |
| // For SPIR-V 1.3 we only output Input/output variables. If we update to |
| // SPIR-V 1.4 or later this should be all variables. |
| if (var->AddressSpace() != builtin::AddressSpace::kIn && |
| var->AddressSpace() != builtin::AddressSpace::kOut) { |
| continue; |
| } |
| |
| uint32_t var_id = LookupVariableID(var); |
| if (var_id == 0) { |
| error_ = "unable to find ID for global variable: " + |
| builder_.Symbols().NameFor(var->Declaration()->name->symbol); |
| return false; |
| } |
| |
| operands.push_back(Operand(var_id)); |
| } |
| push_entry_point(spv::Op::OpEntryPoint, operands); |
| |
| return true; |
| } |
| |
| bool Builder::GenerateExecutionModes(const ast::Function* func, uint32_t id) { |
| auto* func_sem = builder_.Sem().Get(func); |
| |
| // WGSL fragment shader origin is upper left |
| if (func->PipelineStage() == ast::PipelineStage::kFragment) { |
| push_execution_mode(spv::Op::OpExecutionMode, |
| {Operand(id), U32Operand(SpvExecutionModeOriginUpperLeft)}); |
| } else if (func->PipelineStage() == ast::PipelineStage::kCompute) { |
| auto& wgsize = func_sem->WorkgroupSize(); |
| |
| // Check if the workgroup_size uses pipeline-overridable constants. |
| if (!wgsize[0].has_value() || !wgsize[1].has_value() || !wgsize[2].has_value()) { |
| error_ = |
| "override-expressions should have been removed with the SubstituteOverride " |
| "transform"; |
| return false; |
| } |
| push_execution_mode( |
| spv::Op::OpExecutionMode, |
| {Operand(id), U32Operand(SpvExecutionModeLocalSize), // |
| Operand(wgsize[0].value()), Operand(wgsize[1].value()), Operand(wgsize[2].value())}); |
| } |
| |
| for (auto it : func_sem->TransitivelyReferencedBuiltinVariables()) { |
| auto builtin = builder_.Sem().Get(it.second)->Value(); |
| if (builtin == builtin::BuiltinValue::kFragDepth) { |
| push_execution_mode(spv::Op::OpExecutionMode, |
| {Operand(id), U32Operand(SpvExecutionModeDepthReplacing)}); |
| } |
| } |
| |
| return true; |
| } |
| |
| uint32_t Builder::GenerateExpression(const sem::Expression* expr) { |
| if (auto* val_expr = expr->As<sem::ValueExpression>()) { |
| if (auto* constant = val_expr->ConstantValue()) { |
| return GenerateConstantIfNeeded(constant); |
| } |
| } |
| if (auto* load = expr->As<sem::Load>()) { |
| auto ref_id = GenerateExpression(load->Reference()); |
| if (ref_id == 0) { |
| return 0; |
| } |
| return GenerateLoad(load->ReferenceType(), ref_id); |
| } |
| return Switch( |
| expr->Declaration(), // |
| [&](const ast::AccessorExpression* a) { return GenerateAccessorExpression(a); }, |
| [&](const ast::BinaryExpression* b) { return GenerateBinaryExpression(b); }, |
| [&](const ast::BitcastExpression* b) { return GenerateBitcastExpression(b); }, |
| [&](const ast::CallExpression* c) { return GenerateCallExpression(c); }, |
| [&](const ast::IdentifierExpression* i) { return GenerateIdentifierExpression(i); }, |
| [&](const ast::LiteralExpression* l) { return GenerateLiteralIfNeeded(l); }, |
| [&](const ast::UnaryOpExpression* u) { return GenerateUnaryOpExpression(u); }, |
| [&](Default) { |
| error_ = "unknown expression type: " + std::string(expr->TypeInfo().name); |
| return 0; |
| }); |
| } |
| |
| uint32_t Builder::GenerateExpression(const ast::Expression* expr) { |
| return GenerateExpression(builder_.Sem().Get(expr)); |
| } |
| |
| bool Builder::GenerateFunction(const ast::Function* func_ast) { |
| auto* func = builder_.Sem().Get(func_ast); |
| |
| uint32_t func_type_id = GenerateFunctionTypeIfNeeded(func); |
| if (func_type_id == 0) { |
| return false; |
| } |
| |
| auto func_op = result_op(); |
| auto func_id = std::get<uint32_t>(func_op); |
| |
| push_debug(spv::Op::OpName, |
| {Operand(func_id), Operand(builder_.Symbols().NameFor(func_ast->name->symbol))}); |
| |
| auto ret_id = GenerateTypeIfNeeded(func->ReturnType()); |
| if (ret_id == 0) { |
| return false; |
| } |
| |
| PushScope(); |
| TINT_DEFER(PopScope()); |
| |
| auto definition_inst = Instruction{ |
| spv::Op::OpFunction, |
| {Operand(ret_id), func_op, U32Operand(SpvFunctionControlMaskNone), Operand(func_type_id)}}; |
| |
| InstructionList params; |
| for (auto* param : func->Parameters()) { |
| auto param_op = result_op(); |
| auto param_id = std::get<uint32_t>(param_op); |
| |
| auto param_type_id = GenerateTypeIfNeeded(param->Type()); |
| if (param_type_id == 0) { |
| return false; |
| } |
| |
| push_debug(spv::Op::OpName, |
| {Operand(param_id), |
| Operand(builder_.Symbols().NameFor(param->Declaration()->name->symbol))}); |
| params.push_back( |
| Instruction{spv::Op::OpFunctionParameter, {Operand(param_type_id), param_op}}); |
| |
| RegisterVariable(param, param_id); |
| } |
| |
| push_function(Function{definition_inst, result_op(), std::move(params)}); |
| |
| for (auto* stmt : func_ast->body->statements) { |
| if (!GenerateStatement(stmt)) { |
| return false; |
| } |
| } |
| |
| if (InsideBasicBlock()) { |
| if (func->ReturnType()->Is<type::Void>()) { |
| push_function_inst(spv::Op::OpReturn, {}); |
| } else { |
| auto zero = GenerateConstantNullIfNeeded(func->ReturnType()); |
| push_function_inst(spv::Op::OpReturnValue, {Operand(zero)}); |
| } |
| } |
| |
| if (func_ast->IsEntryPoint()) { |
| if (!GenerateEntryPoint(func_ast, func_id)) { |
| return false; |
| } |
| if (!GenerateExecutionModes(func_ast, func_id)) { |
| return false; |
| } |
| } |
| |
| func_symbol_to_id_[func_ast->name->symbol] = func_id; |
| |
| return true; |
| } |
| |
| uint32_t Builder::GenerateFunctionTypeIfNeeded(const sem::Function* func) { |
| return utils::GetOrCreate(func_sig_to_id_, func->Signature(), [&]() -> uint32_t { |
| auto func_op = result_op(); |
| auto func_type_id = std::get<uint32_t>(func_op); |
| |
| auto ret_id = GenerateTypeIfNeeded(func->ReturnType()); |
| if (ret_id == 0) { |
| return 0; |
| } |
| |
| OperandList ops = {func_op, Operand(ret_id)}; |
| for (auto* param : func->Parameters()) { |
| auto param_type_id = GenerateTypeIfNeeded(param->Type()); |
| if (param_type_id == 0) { |
| return 0; |
| } |
| ops.push_back(Operand(param_type_id)); |
| } |
| |
| push_type(spv::Op::OpTypeFunction, std::move(ops)); |
| return func_type_id; |
| }); |
| } |
| |
| bool Builder::GenerateFunctionVariable(const ast::Variable* v) { |
| if (v->Is<ast::Const>()) { |
| // Constants are generated at their use. This is required as the 'const' declaration may be |
| // abstract-numeric, which has no SPIR-V type. |
| return true; |
| } |
| |
| uint32_t init_id = 0; |
| if (v->initializer) { |
| init_id = GenerateExpression(v->initializer); |
| if (init_id == 0) { |
| return false; |
| } |
| } |
| |
| auto* sem = builder_.Sem().Get(v); |
| |
| if (v->Is<ast::Let>()) { |
| if (!v->initializer) { |
| error_ = "missing initializer for let"; |
| return false; |
| } |
| RegisterVariable(sem, init_id); |
| return true; |
| } |
| |
| auto result = result_op(); |
| auto var_id = std::get<uint32_t>(result); |
| auto sc = builtin::AddressSpace::kFunction; |
| auto* type = sem->Type(); |
| auto type_id = GenerateTypeIfNeeded(type); |
| if (type_id == 0) { |
| return false; |
| } |
| |
| push_debug(spv::Op::OpName, |
| {Operand(var_id), Operand(builder_.Symbols().NameFor(v->name->symbol))}); |
| |
| // TODO(dsinclair) We could detect if the initializer is fully const and emit |
| // an initializer value for the variable instead of doing the OpLoad. |
| auto null_id = GenerateConstantNullIfNeeded(type->UnwrapRef()); |
| if (null_id == 0) { |
| return 0; |
| } |
| push_function_var( |
| {Operand(type_id), result, U32Operand(ConvertAddressSpace(sc)), Operand(null_id)}); |
| |
| if (v->initializer) { |
| if (!GenerateStore(var_id, init_id)) { |
| return false; |
| } |
| } |
| |
| RegisterVariable(sem, var_id); |
| |
| return true; |
| } |
| |
| bool Builder::GenerateStore(uint32_t to, uint32_t from) { |
| return push_function_inst(spv::Op::OpStore, {Operand(to), Operand(from)}); |
| } |
| |
| bool Builder::GenerateGlobalVariable(const ast::Variable* v) { |
| if (v->Is<ast::Const>()) { |
| // Constants are generated at their use. This is required as the 'const' declaration may be |
| // abstract-numeric, which has no SPIR-V type. |
| return true; |
| } |
| |
| auto* sem = builder_.Sem().Get<sem::GlobalVariable>(v); |
| if (TINT_UNLIKELY(!sem)) { |
| TINT_ICE(Writer, builder_.Diagnostics()) |
| << "attempted to generate a global from a non-global variable"; |
| return false; |
| } |
| auto* type = sem->Type()->UnwrapRef(); |
| |
| uint32_t init_id = 0; |
| if (auto* ctor = v->initializer) { |
| init_id = GenerateConstructorExpression(v, ctor); |
| if (init_id == 0) { |
| return false; |
| } |
| } |
| |
| auto result = result_op(); |
| auto var_id = std::get<uint32_t>(result); |
| |
| auto sc = sem->AddressSpace() == builtin::AddressSpace::kUndefined |
| ? builtin::AddressSpace::kPrivate |
| : sem->AddressSpace(); |
| |
| auto type_id = GenerateTypeIfNeeded(sem->Type()); |
| if (type_id == 0) { |
| return false; |
| } |
| |
| push_debug(spv::Op::OpName, |
| {Operand(var_id), Operand(builder_.Symbols().NameFor(v->name->symbol))}); |
| |
| OperandList ops = {Operand(type_id), result, U32Operand(ConvertAddressSpace(sc))}; |
| |
| if (v->initializer) { |
| ops.push_back(Operand(init_id)); |
| } else { |
| auto* st = type->As<type::StorageTexture>(); |
| if (st || type->Is<sem::Struct>()) { |
| // type is a sem::Struct or a type::StorageTexture |
| auto access = st ? st->access() : sem->Access(); |
| switch (access) { |
| case builtin::Access::kWrite: |
| push_annot(spv::Op::OpDecorate, |
| {Operand(var_id), U32Operand(SpvDecorationNonReadable)}); |
| break; |
| case builtin::Access::kRead: |
| push_annot(spv::Op::OpDecorate, |
| {Operand(var_id), U32Operand(SpvDecorationNonWritable)}); |
| break; |
| case builtin::Access::kUndefined: |
| case builtin::Access::kReadWrite: |
| break; |
| } |
| } |
| if (!type->Is<type::Sampler>()) { |
| // If we don't have a initializer and we're an Output or Private |
| // variable, then WGSL requires that we zero-initialize. |
| // If we're a Workgroup variable, and the |
| // VK_KHR_zero_initialize_workgroup_memory extension is enabled, we should |
| // also zero-initialize. |
| if (sem->AddressSpace() == builtin::AddressSpace::kPrivate || |
| sem->AddressSpace() == builtin::AddressSpace::kOut || |
| (zero_initialize_workgroup_memory_ && |
| sem->AddressSpace() == builtin::AddressSpace::kWorkgroup)) { |
| init_id = GenerateConstantNullIfNeeded(type); |
| if (init_id == 0) { |
| return 0; |
| } |
| ops.push_back(Operand(init_id)); |
| } |
| } |
| } |
| |
| push_type(spv::Op::OpVariable, std::move(ops)); |
| |
| for (auto* attr : v->attributes) { |
| bool ok = Switch( |
| attr, |
| [&](const ast::BuiltinAttribute* builtin_attr) { |
| auto builtin = builder_.Sem().Get(builtin_attr)->Value(); |
| push_annot(spv::Op::OpDecorate, |
| {Operand(var_id), U32Operand(SpvDecorationBuiltIn), |
| U32Operand(ConvertBuiltin(builtin, sem->AddressSpace()))}); |
| return true; |
| }, |
| [&](const ast::LocationAttribute*) { |
| push_annot(spv::Op::OpDecorate, {Operand(var_id), U32Operand(SpvDecorationLocation), |
| Operand(sem->Location().value())}); |
| return true; |
| }, |
| [&](const ast::InterpolateAttribute* interpolate) { |
| auto& s = builder_.Sem(); |
| auto i_type = |
| s.Get<sem::BuiltinEnumExpression<builtin::InterpolationType>>(interpolate->type) |
| ->Value(); |
| |
| auto i_smpl = builtin::InterpolationSampling::kUndefined; |
| if (interpolate->sampling) { |
| i_smpl = s.Get<sem::BuiltinEnumExpression<builtin::InterpolationSampling>>( |
| interpolate->sampling) |
| ->Value(); |
| } |
| |
| AddInterpolationDecorations(var_id, i_type, i_smpl); |
| return true; |
| }, |
| [&](const ast::InvariantAttribute*) { |
| push_annot(spv::Op::OpDecorate, |
| {Operand(var_id), U32Operand(SpvDecorationInvariant)}); |
| return true; |
| }, |
| [&](const ast::BindingAttribute*) { |
| auto bp = sem->BindingPoint(); |
| push_annot(spv::Op::OpDecorate, {Operand(var_id), U32Operand(SpvDecorationBinding), |
| Operand(bp.binding)}); |
| return true; |
| }, |
| [&](const ast::GroupAttribute*) { |
| auto bp = sem->BindingPoint(); |
| push_annot( |
| spv::Op::OpDecorate, |
| {Operand(var_id), U32Operand(SpvDecorationDescriptorSet), Operand(bp.group)}); |
| return true; |
| }, |
| [&](const ast::IdAttribute*) { |
| return true; // Spec constants are handled elsewhere |
| }, |
| [&](const ast::InternalAttribute*) { |
| return true; // ignored |
| }, |
| [&](Default) { |
| error_ = "unknown attribute"; |
| return false; |
| }); |
| if (!ok) { |
| return false; |
| } |
| } |
| |
| RegisterVariable(sem, var_id); |
| return true; |
| } |
| |
| bool Builder::GenerateIndexAccessor(const ast::IndexAccessorExpression* expr, AccessorInfo* info) { |
| auto idx_id = GenerateExpression(expr->index); |
| if (idx_id == 0) { |
| return 0; |
| } |
| |
| // If the source is a reference, we access chain into it. |
| // In the future, pointers may support access-chaining. |
| // See https://github.com/gpuweb/gpuweb/pull/1580 |
| if (info->source_type->Is<type::Reference>()) { |
| info->access_chain_indices.push_back(idx_id); |
| info->source_type = builder_.Sem().Get(expr)->UnwrapLoad()->Type(); |
| return true; |
| } |
| |
| auto result_type_id = GenerateTypeIfNeeded(TypeOf(expr)); |
| if (result_type_id == 0) { |
| return false; |
| } |
| |
| // We don't have a pointer, so we can just directly extract the value. |
| auto extract = result_op(); |
| auto extract_id = std::get<uint32_t>(extract); |
| |
| // If the index is compile-time constant, we use OpCompositeExtract. |
| auto* idx = builder_.Sem().GetVal(expr->index); |
| if (auto idx_constval = idx->ConstantValue()) { |
| if (!push_function_inst(spv::Op::OpCompositeExtract, |
| { |
| Operand(result_type_id), |
| extract, |
| Operand(info->source_id), |
| Operand(idx_constval->ValueAs<u32>()), |
| })) { |
| return false; |
| } |
| |
| info->source_id = extract_id; |
| info->source_type = TypeOf(expr); |
| |
| return true; |
| } |
| |
| // If the source is a vector, we use OpVectorExtractDynamic. |
| if (TINT_LIKELY(info->source_type->Is<type::Vector>())) { |
| if (!push_function_inst( |
| spv::Op::OpVectorExtractDynamic, |
| {Operand(result_type_id), extract, Operand(info->source_id), Operand(idx_id)})) { |
| return false; |
| } |
| |
| info->source_id = extract_id; |
| info->source_type = TypeOf(expr); |
| |
| return true; |
| } |
| |
| TINT_ICE(Writer, builder_.Diagnostics()) << "unsupported index accessor expression"; |
| return false; |
| } |
| |
| bool Builder::GenerateMemberAccessor(const ast::MemberAccessorExpression* expr, |
| AccessorInfo* info) { |
| auto* expr_sem = builder_.Sem().Get(expr)->UnwrapLoad(); |
| auto* expr_type = expr_sem->Type(); |
| |
| return Switch( |
| expr_sem, // |
| [&](const sem::StructMemberAccess* access) { |
| uint32_t idx = access->Member()->Index(); |
| |
| if (info->source_type->Is<type::Reference>()) { |
| auto idx_id = GenerateConstantIfNeeded(ScalarConstant::U32(idx)); |
| if (TINT_UNLIKELY(idx_id == 0)) { |
| return false; |
| } |
| info->access_chain_indices.push_back(idx_id); |
| info->source_type = expr_type; |
| } else { |
| auto result_type_id = GenerateTypeIfNeeded(expr_type); |
| if (TINT_UNLIKELY(result_type_id == 0)) { |
| return false; |
| } |
| |
| auto extract = result_op(); |
| auto extract_id = std::get<uint32_t>(extract); |
| if (!push_function_inst(spv::Op::OpCompositeExtract, |
| {Operand(result_type_id), extract, Operand(info->source_id), |
| Operand(idx)})) { |
| return false; |
| } |
| |
| info->source_id = extract_id; |
| info->source_type = expr_type; |
| } |
| |
| return true; |
| }, |
| [&](const sem::Swizzle* swizzle) { |
| // Single element swizzle is either an access chain or a composite extract |
| auto& indices = swizzle->Indices(); |
| if (indices.Length() == 1) { |
| if (info->source_type->Is<type::Reference>()) { |
| auto idx_id = GenerateConstantIfNeeded(ScalarConstant::U32(indices[0])); |
| if (TINT_UNLIKELY(idx_id == 0)) { |
| return false; |
| } |
| info->access_chain_indices.push_back(idx_id); |
| } else { |
| auto result_type_id = GenerateTypeIfNeeded(expr_type); |
| if (TINT_UNLIKELY(result_type_id == 0)) { |
| return false; |
| } |
| |
| auto extract = result_op(); |
| auto extract_id = std::get<uint32_t>(extract); |
| if (!push_function_inst(spv::Op::OpCompositeExtract, |
| {Operand(result_type_id), extract, |
| Operand(info->source_id), Operand(indices[0])})) { |
| return false; |
| } |
| |
| info->source_id = extract_id; |
| info->source_type = expr_type; |
| } |
| return true; |
| } |
| |
| // Store the type away as it may change if we run the access chain |
| auto* incoming_type = info->source_type; |
| |
| // Multi-item extract is a VectorShuffle. We have to emit any existing |
| // access chain data, then load the access chain and shuffle that. |
| if (!info->access_chain_indices.empty()) { |
| auto result_type_id = GenerateTypeIfNeeded(info->source_type); |
| if (TINT_UNLIKELY(result_type_id == 0)) { |
| return false; |
| } |
| auto extract = result_op(); |
| auto extract_id = std::get<uint32_t>(extract); |
| |
| OperandList ops = {Operand(result_type_id), extract, Operand(info->source_id)}; |
| for (auto id : info->access_chain_indices) { |
| ops.push_back(Operand(id)); |
| } |
| |
| if (!push_function_inst(spv::Op::OpAccessChain, ops)) { |
| return false; |
| } |
| |
| info->source_id = GenerateLoadIfNeeded(expr_type, extract_id); |
| info->source_type = expr_type->UnwrapRef(); |
| info->access_chain_indices.clear(); |
| } |
| |
| auto result_type_id = GenerateTypeIfNeeded(expr_type); |
| if (TINT_UNLIKELY(result_type_id == 0)) { |
| return false; |
| } |
| |
| auto vec_id = GenerateLoadIfNeeded(incoming_type, info->source_id); |
| |
| auto result = result_op(); |
| auto result_id = std::get<uint32_t>(result); |
| |
| OperandList ops = {Operand(result_type_id), result, Operand(vec_id), Operand(vec_id)}; |
| |
| for (auto idx : indices) { |
| ops.push_back(Operand(idx)); |
| } |
| |
| if (!push_function_inst(spv::Op::OpVectorShuffle, ops)) { |
| return false; |
| } |
| info->source_id = result_id; |
| info->source_type = expr_type; |
| return true; |
| }, |
| [&](Default) { |
| TINT_ICE(Writer, builder_.Diagnostics()) |
| << "unhandled member index type: " << expr_sem->TypeInfo().name; |
| return false; |
| }); |
| } |
| |
| uint32_t Builder::GenerateAccessorExpression(const ast::AccessorExpression* expr) { |
| // Gather a list of all the member and index accessors that are in this chain. |
| // The list is built in reverse order as that's the order we need to access |
| // the chain. |
| std::vector<const ast::Expression*> accessors; |
| const ast::Expression* source = expr; |
| while (true) { |
| if (auto* array = source->As<ast::IndexAccessorExpression>()) { |
| accessors.insert(accessors.begin(), source); |
| source = array->object; |
| } else if (auto* member = source->As<ast::MemberAccessorExpression>()) { |
| accessors.insert(accessors.begin(), source); |
| source = member->object; |
| } else { |
| break; |
| } |
| } |
| |
| AccessorInfo info; |
| info.source_id = GenerateExpression(source); |
| if (info.source_id == 0) { |
| return 0; |
| } |
| info.source_type = TypeOf(source); |
| |
| // Note: Dynamic index on array and matrix values (lets) should have been |
| // promoted to storage with the VarForDynamicIndex transform. |
| |
| for (auto* accessor : accessors) { |
| bool ok = Switch( |
| accessor, |
| [&](const ast::IndexAccessorExpression* array) { |
| return GenerateIndexAccessor(array, &info); |
| }, |
| [&](const ast::MemberAccessorExpression* member) { |
| return GenerateMemberAccessor(member, &info); |
| }, |
| [&](Default) { |
| error_ = "invalid accessor in list: " + std::string(accessor->TypeInfo().name); |
| return false; |
| }); |
| if (!ok) { |
| return false; |
| } |
| } |
| |
| if (!info.access_chain_indices.empty()) { |
| auto* type = builder_.Sem().Get(expr)->UnwrapLoad()->Type(); |
| auto result_type_id = GenerateTypeIfNeeded(type); |
| if (result_type_id == 0) { |
| return 0; |
| } |
| |
| auto result = result_op(); |
| auto result_id = std::get<uint32_t>(result); |
| |
| OperandList ops = {Operand(result_type_id), result, Operand(info.source_id)}; |
| for (auto id : info.access_chain_indices) { |
| ops.push_back(Operand(id)); |
| } |
| |
| if (!push_function_inst(spv::Op::OpAccessChain, ops)) { |
| return false; |
| } |
| info.source_id = result_id; |
| } |
| |
| return info.source_id; |
| } |
| |
| uint32_t Builder::GenerateIdentifierExpression(const ast::IdentifierExpression* expr) { |
| if (auto* sem = builder_.Sem().GetVal(expr); sem) { |
| if (auto* user = sem->UnwrapLoad()->As<sem::VariableUser>()) { |
| return LookupVariableID(user->Variable()); |
| } |
| } |
| error_ = "identifier '" + builder_.Symbols().NameFor(expr->identifier->symbol) + |
| "' does not resolve to a variable"; |
| return 0; |
| } |
| |
| uint32_t Builder::GenerateLoad(const type::Reference* type, uint32_t id) { |
| auto type_id = GenerateTypeIfNeeded(type->StoreType()); |
| auto result = result_op(); |
| auto result_id = std::get<uint32_t>(result); |
| if (!push_function_inst(spv::Op::OpLoad, {Operand(type_id), result, Operand(id)})) { |
| return 0; |
| } |
| return result_id; |
| } |
| |
| uint32_t Builder::GenerateLoadIfNeeded(const type::Type* type, uint32_t id) { |
| if (auto* ref = type->As<type::Reference>()) { |
| return GenerateLoad(ref, id); |
| } |
| return id; |
| } |
| |
| uint32_t Builder::GenerateUnaryOpExpression(const ast::UnaryOpExpression* expr) { |
| auto result = result_op(); |
| auto result_id = std::get<uint32_t>(result); |
| |
| spv::Op op = spv::Op::OpNop; |
| switch (expr->op) { |
| case ast::UnaryOp::kComplement: |
| op = spv::Op::OpNot; |
| break; |
| case ast::UnaryOp::kNegation: |
| if (TypeOf(expr)->is_float_scalar_or_vector()) { |
| op = spv::Op::OpFNegate; |
| } else { |
| op = spv::Op::OpSNegate; |
| } |
| break; |
| case ast::UnaryOp::kNot: |
| op = spv::Op::OpLogicalNot; |
| break; |
| case ast::UnaryOp::kAddressOf: |
| case ast::UnaryOp::kIndirection: |
| // Address-of converts a reference to a pointer, and dereference converts |
| // a pointer to a reference. These are the same thing in SPIR-V, so this |
| // is a no-op. |
| return GenerateExpression(expr->expr); |
| } |
| |
| auto val_id = GenerateExpression(expr->expr); |
| if (val_id == 0) { |
| return 0; |
| } |
| |
| auto type_id = GenerateTypeIfNeeded(TypeOf(expr)); |
| if (type_id == 0) { |
| return 0; |
| } |
| |
| if (!push_function_inst(op, {Operand(type_id), result, Operand(val_id)})) { |
| return false; |
| } |
| |
| return result_id; |
| } |
| |
| uint32_t Builder::GetGLSLstd450Import() { |
| auto where = import_name_to_id_.find(kGLSLstd450); |
| if (where != import_name_to_id_.end()) { |
| return where->second; |
| } |
| |
| // It doesn't exist yet. Generate it. |
| auto result = result_op(); |
| auto id = std::get<uint32_t>(result); |
| |
| push_ext_import(spv::Op::OpExtInstImport, {result, Operand(kGLSLstd450)}); |
| |
| // Remember it for later. |
| import_name_to_id_[kGLSLstd450] = id; |
| return id; |
| } |
| |
| uint32_t Builder::GenerateConstructorExpression(const ast::Variable* var, |
| const ast::Expression* expr) { |
| if (auto* sem = builder_.Sem().GetVal(expr)) { |
| if (auto constant = sem->ConstantValue()) { |
| return GenerateConstantIfNeeded(constant); |
| } |
| } |
| if (auto* call = builder_.Sem().Get<sem::Call>(expr)) { |
| if (call->Target()->IsAnyOf<sem::ValueConstructor, sem::ValueConversion>()) { |
| return GenerateValueConstructorOrConversion(call, var); |
| } |
| } |
| error_ = "unknown constructor expression"; |
| return 0; |
| } |
| |
| bool Builder::IsConstructorConst(const ast::Expression* expr) { |
| bool is_const = true; |
| ast::TraverseExpressions(expr, builder_.Diagnostics(), [&](const ast::Expression* e) { |
| if (e->Is<ast::LiteralExpression>()) { |
| return ast::TraverseAction::Descend; |
| } |
| if (auto* ce = e->As<ast::CallExpression>()) { |
| auto* sem = builder_.Sem().Get(ce); |
| if (sem->Is<sem::Materialize>()) { |
| // Materialize can only occur on compile time expressions, so this sub-tree must be |
| // constant. |
| return ast::TraverseAction::Skip; |
| } |
| auto* call = sem->As<sem::Call>(); |
| if (call->Target()->Is<sem::ValueConstructor>()) { |
| return ast::TraverseAction::Descend; |
| } |
| } |
| |
| is_const = false; |
| return ast::TraverseAction::Stop; |
| }); |
| return is_const; |
| } |
| |
| uint32_t Builder::GenerateValueConstructorOrConversion(const sem::Call* call, |
| const ast::Variable* var) { |
| auto& args = call->Arguments(); |
| auto* global_var = builder_.Sem().Get<sem::GlobalVariable>(var); |
| auto* result_type = call->Type(); |
| |
| // Generate the zero constructor if there are no values provided. |
| if (args.IsEmpty()) { |
| return GenerateConstantNullIfNeeded(result_type->UnwrapRef()); |
| } |
| |
| result_type = result_type->UnwrapRef(); |
| bool constructor_is_const = IsConstructorConst(call->Declaration()); |
| if (has_error()) { |
| return 0; |
| } |
| |
| bool can_cast_or_copy = result_type->is_scalar(); |
| |
| if (auto* res_vec = result_type->As<type::Vector>()) { |
| if (res_vec->type()->is_scalar()) { |
| auto* value_type = args[0]->Type()->UnwrapRef(); |
| if (auto* val_vec = value_type->As<type::Vector>()) { |
| if (val_vec->type()->is_scalar()) { |
| can_cast_or_copy = res_vec->Width() == val_vec->Width(); |
| } |
| } |
| } |
| } |
| |
| if (auto* res_mat = result_type->As<type::Matrix>()) { |
| auto* value_type = args[0]->Type()->UnwrapRef(); |
| if (auto* val_mat = value_type->As<type::Matrix>()) { |
| // Generate passthrough for matrices of the same type |
| can_cast_or_copy = res_mat == val_mat; |
| } |
| } |
| |
| if (can_cast_or_copy) { |
| return GenerateCastOrCopyOrPassthrough(result_type, args[0]->Declaration(), global_var); |
| } |
| |
| auto type_id = GenerateTypeIfNeeded(result_type); |
| if (type_id == 0) { |
| return 0; |
| } |
| |
| bool result_is_constant_composite = constructor_is_const; |
| bool result_is_spec_composite = false; |
| |
| if (auto* vec = result_type->As<type::Vector>()) { |
| result_type = vec->type(); |
| } |
| |
| OperandList ops; |
| static constexpr size_t kOpsResultIdx = 1; |
| static constexpr size_t kOpsFirstValueIdx = 2; |
| ops.reserve(8); |
| ops.push_back(Operand(type_id)); |
| ops.push_back(Operand(0u)); // Placeholder for the result ID |
| |
| for (auto* e : args) { |
| uint32_t id = 0; |
| id = GenerateExpression(e); |
| if (id == 0) { |
| return 0; |
| } |
| |
| auto* value_type = e->Type()->UnwrapRef(); |
| // If the result and value types are the same we can just use the object. |
| // If the result is not a vector then we should have validated that the |
| // value type is a correctly sized vector so we can just use it directly. |
| if (result_type == value_type || result_type->Is<type::Matrix>() || |
| result_type->Is<type::Array>() || result_type->Is<sem::Struct>()) { |
| ops.push_back(Operand(id)); |
| continue; |
| } |
| |
| // Both scalars, but not the same type so we need to generate a conversion |
| // of the value. |
| if (value_type->is_scalar() && result_type->is_scalar()) { |
| id = GenerateCastOrCopyOrPassthrough(result_type, args[0]->Declaration(), global_var); |
| ops.push_back(Operand(id)); |
| continue; |
| } |
| |
| // When handling vectors as the values there a few cases to take into |
| // consideration: |
| // 1. Module scoped vec3<f32>(vec2<f32>(1, 2), 3) -> OpSpecConstantOp |
| // 2. Function scoped vec3<f32>(vec2<f32>(1, 2), 3) -> OpCompositeExtract |
| // 3. Either array<vec3<f32>, 1>(vec3<f32>(1, 2, 3)) -> use the ID. |
| // -> handled above |
| // |
| // For cases 1 and 2, if the type is different we also may need to insert |
| // a type cast. |
| if (auto* vec = value_type->As<type::Vector>()) { |
| auto* vec_type = vec->type(); |
| |
| auto value_type_id = GenerateTypeIfNeeded(vec_type); |
| if (value_type_id == 0) { |
| return 0; |
| } |
| |
| for (uint32_t i = 0; i < vec->Width(); ++i) { |
| auto extract = result_op(); |
| auto extract_id = std::get<uint32_t>(extract); |
| |
| if (!global_var) { |
| // A non-global initializer. Case 2. |
| if (!push_function_inst( |
| spv::Op::OpCompositeExtract, |
| {Operand(value_type_id), extract, Operand(id), Operand(i)})) { |
| return false; |
| } |
| |
| // We no longer have a constant composite, but have to do a |
| // composite construction as these calls are inside a function. |
| result_is_constant_composite = false; |
| } else { |
| // A global initializer, must use OpSpecConstantOp. Case 1. |
| auto idx_id = GenerateConstantIfNeeded(ScalarConstant::U32(i)); |
| if (idx_id == 0) { |
| return 0; |
| } |
| push_type(spv::Op::OpSpecConstantOp, |
| {Operand(value_type_id), extract, U32Operand(SpvOpCompositeExtract), |
| Operand(id), Operand(idx_id)}); |
| |
| result_is_spec_composite = true; |
| } |
| |
| ops.push_back(Operand(extract_id)); |
| } |
| } else { |
| error_ = "Unhandled type cast value type"; |
| return 0; |
| } |
| } |
| |
| // For a single-value vector initializer, splat the initializer value. |
| auto* const init_result_type = call->Type()->UnwrapRef(); |
| if (args.Length() == 1 && init_result_type->is_scalar_vector() && |
| args[0]->Type()->UnwrapRef()->is_scalar()) { |
| size_t vec_size = init_result_type->As<type::Vector>()->Width(); |
| for (size_t i = 0; i < (vec_size - 1); ++i) { |
| ops.push_back(ops[kOpsFirstValueIdx]); |
| } |
| } |
| |
| auto& stack = (result_is_spec_composite || result_is_constant_composite) |
| ? scope_stack_[0] // Global scope |
| : scope_stack_.back(); // Lexical scope |
| |
| return utils::GetOrCreate(stack.type_init_to_id_, OperandListKey{ops}, [&]() -> uint32_t { |
| auto result = result_op(); |
| ops[kOpsResultIdx] = result; |
| |
| if (result_is_spec_composite) { |
| push_type(spv::Op::OpSpecConstantComposite, ops); |
| } else if (result_is_constant_composite) { |
| push_type(spv::Op::OpConstantComposite, ops); |
| } else { |
| if (!push_function_inst(spv::Op::OpCompositeConstruct, ops)) { |
| return 0; |
| } |
| } |
| |
| return std::get<uint32_t>(result); |
| }); |
| } |
| |
| uint32_t Builder::GenerateCastOrCopyOrPassthrough(const type::Type* to_type, |
| const ast::Expression* from_expr, |
| bool is_global_init) { |
| // This should not happen as we rely on constant folding to obviate |
| // casts/conversions for module-scope variables |
| if (TINT_UNLIKELY(is_global_init)) { |
| TINT_ICE(Writer, builder_.Diagnostics()) |
| << "Module-level conversions are not supported. Conversions should " |
| "have already been constant-folded by the FoldConstants transform."; |
| return 0; |
| } |
| |
| auto elem_type_of = [](const type::Type* t) -> const type::Type* { |
| if (t->is_scalar()) { |
| return t; |
| } |
| if (auto* v = t->As<type::Vector>()) { |
| return v->type(); |
| } |
| return nullptr; |
| }; |
| |
| auto result = result_op(); |
| auto result_id = std::get<uint32_t>(result); |
| |
| auto result_type_id = GenerateTypeIfNeeded(to_type); |
| if (result_type_id == 0) { |
| return 0; |
| } |
| |
| auto val_id = GenerateExpression(from_expr); |
| if (val_id == 0) { |
| return 0; |
| } |
| |
| auto* from_type = TypeOf(from_expr)->UnwrapRef(); |
| |
| spv::Op op = spv::Op::OpNop; |
| if ((from_type->Is<type::I32>() && to_type->is_float_scalar()) || |
| (from_type->is_signed_integer_vector() && to_type->is_float_vector())) { |
| op = spv::Op::OpConvertSToF; |
| } else if ((from_type->Is<type::U32>() && to_type->is_float_scalar()) || |
| (from_type->is_unsigned_integer_vector() && to_type->is_float_vector())) { |
| op = spv::Op::OpConvertUToF; |
| } else if ((from_type->is_float_scalar() && to_type->Is<type::I32>()) || |
| (from_type->is_float_vector() && to_type->is_signed_integer_vector())) { |
| op = spv::Op::OpConvertFToS; |
| } else if ((from_type->is_float_scalar() && to_type->Is<type::U32>()) || |
| (from_type->is_float_vector() && to_type->is_unsigned_integer_vector())) { |
| op = spv::Op::OpConvertFToU; |
| } else if (from_type->IsAnyOf<type::Bool, type::F32, type::I32, type::U32, type::F16, |
| type::Vector>() && |
| from_type == to_type) { |
| // Identity initializer for scalar and vector types |
| return val_id; |
| } else if ((from_type->is_float_scalar() && to_type->is_float_scalar()) || |
| (from_type->is_float_vector() && to_type->is_float_vector() && |
| from_type->As<type::Vector>()->Width() == to_type->As<type::Vector>()->Width())) { |
| // Convert between f32 and f16 types. |
| // OpFConvert requires the scalar component types to be different, and the case of from_type |
| // and to_type being the same floating point scalar or vector type, i.e. identity |
| // initializer, is already handled in the previous else-if clause. |
| op = spv::Op::OpFConvert; |
| } else if ((from_type->Is<type::I32>() && to_type->Is<type::U32>()) || |
| (from_type->Is<type::U32>() && to_type->Is<type::I32>()) || |
| (from_type->is_signed_integer_vector() && to_type->is_unsigned_integer_vector()) || |
| (from_type->is_unsigned_integer_vector() && |
| to_type->is_integer_scalar_or_vector())) { |
| op = spv::Op::OpBitcast; |
| } else if ((from_type->is_numeric_scalar() && to_type->Is<type::Bool>()) || |
| (from_type->is_numeric_vector() && to_type->is_bool_vector())) { |
| // Convert scalar (vector) to bool (vector) |
| |
| // Return the result of comparing from_expr with zero |
| uint32_t zero = GenerateConstantNullIfNeeded(from_type); |
| const auto* from_elem_type = elem_type_of(from_type); |
| op = from_elem_type->is_integer_scalar() ? spv::Op::OpINotEqual : spv::Op::OpFUnordNotEqual; |
| if (!push_function_inst(op, {Operand(result_type_id), Operand(result_id), Operand(val_id), |
| Operand(zero)})) { |
| return 0; |
| } |
| |
| return result_id; |
| } else if (from_type->is_bool_scalar_or_vector() && to_type->is_numeric_scalar_or_vector()) { |
| // Convert bool scalar/vector to numeric scalar/vector. |
| // Use the bool to select between 1 (if true) and 0 (if false). |
| |
| const auto* to_elem_type = elem_type_of(to_type); |
| uint32_t one_id; |
| uint32_t zero_id; |
| if (to_elem_type->Is<type::F32>()) { |
| zero_id = GenerateConstantIfNeeded(ScalarConstant::F32(0)); |
| one_id = GenerateConstantIfNeeded(ScalarConstant::F32(1)); |
| } else if (to_elem_type->Is<type::F16>()) { |
| zero_id = GenerateConstantIfNeeded(ScalarConstant::F16(0)); |
| one_id = GenerateConstantIfNeeded(ScalarConstant::F16(1)); |
| } else if (to_elem_type->Is<type::U32>()) { |
| zero_id = GenerateConstantIfNeeded(ScalarConstant::U32(0)); |
| one_id = GenerateConstantIfNeeded(ScalarConstant::U32(1)); |
| } else if (to_elem_type->Is<type::I32>()) { |
| zero_id = GenerateConstantIfNeeded(ScalarConstant::I32(0)); |
| one_id = GenerateConstantIfNeeded(ScalarConstant::I32(1)); |
| } else { |
| error_ = "invalid destination type for bool conversion"; |
| return false; |
| } |
| if (auto* to_vec = to_type->As<type::Vector>()) { |
| // Splat the scalars into vectors. |
| zero_id = GenerateConstantVectorSplatIfNeeded(to_vec, zero_id); |
| one_id = GenerateConstantVectorSplatIfNeeded(to_vec, one_id); |
| } |
| if (!one_id || !zero_id) { |
| return false; |
| } |
| |
| op = spv::Op::OpSelect; |
| if (!push_function_inst(op, {Operand(result_type_id), Operand(result_id), Operand(val_id), |
| Operand(one_id), Operand(zero_id)})) { |
| return 0; |
| } |
| |
| return result_id; |
| } else if (TINT_LIKELY(from_type->Is<type::Matrix>() && to_type->Is<type::Matrix>())) { |
| // SPIRV does not support matrix conversion, the only valid case is matrix identity |
| // initializer. Matrix conversion between f32 and f16 should be transformed into vector |
| // conversions for each column vectors by VectorizeMatrixConversions. |
| auto* from_mat = from_type->As<type::Matrix>(); |
| auto* to_mat = to_type->As<type::Matrix>(); |
| if (TINT_LIKELY(from_mat == to_mat)) { |
| return val_id; |
| } |
| TINT_ICE(Writer, builder_.Diagnostics()) |
| << "matrix conversion is not supported and should have been handled by " |
| "VectorizeMatrixConversions"; |
| } else { |
| TINT_ICE(Writer, builder_.Diagnostics()) << "Invalid from_type"; |
| } |
| |
| if (op == spv::Op::OpNop) { |
| error_ = "unable to determine conversion type for cast, from: " + |
| from_type->FriendlyName(builder_.Symbols()) + |
| " to: " + to_type->FriendlyName(builder_.Symbols()); |
| return 0; |
| } |
| |
| if (!push_function_inst(op, {Operand(result_type_id), result, Operand(val_id)})) { |
| return 0; |
| } |
| |
| return result_id; |
| } |
| |
| uint32_t Builder::GenerateLiteralIfNeeded(const ast::LiteralExpression* lit) { |
| ScalarConstant constant; |
| Switch( |
| lit, |
| [&](const ast::BoolLiteralExpression* l) { |
| constant.kind = ScalarConstant::Kind::kBool; |
| constant.value.b = l->value; |
| }, |
| [&](const ast::IntLiteralExpression* i) { |
| switch (i->suffix) { |
| case ast::IntLiteralExpression::Suffix::kNone: |
| case ast::IntLiteralExpression::Suffix::kI: |
| constant.kind = ScalarConstant::Kind::kI32; |
| constant.value.i32 = static_cast<int32_t>(i->value); |
| return; |
| case ast::IntLiteralExpression::Suffix::kU: |
| constant.kind = ScalarConstant::Kind::kU32; |
| constant.value.u32 = static_cast<uint32_t>(i->value); |
| return; |
| } |
| }, |
| [&](const ast::FloatLiteralExpression* f) { |
| switch (f->suffix) { |
| case ast::FloatLiteralExpression::Suffix::kNone: |
| case ast::FloatLiteralExpression::Suffix::kF: |
| constant.kind = ScalarConstant::Kind::kF32; |
| constant.value.f32 = static_cast<float>(f->value); |
| return; |
| case ast::FloatLiteralExpression::Suffix::kH: |
| constant.kind = ScalarConstant::Kind::kF16; |
| constant.value.f16 = {f16(static_cast<float>(f->value)).BitsRepresentation()}; |
| return; |
| } |
| }, |
| [&](Default) { error_ = "unknown literal type"; }); |
| |
| if (!error_.empty()) { |
| return false; |
| } |
| |
| return GenerateConstantIfNeeded(constant); |
| } |
| |
| uint32_t Builder::GenerateConstantIfNeeded(const constant::Value* constant) { |
| if (constant->AllZero()) { |
| return GenerateConstantNullIfNeeded(constant->Type()); |
| } |
| auto* ty = constant->Type(); |
| |
| auto composite = [&](size_t el_count) -> uint32_t { |
| auto type_id = GenerateTypeIfNeeded(ty); |
| if (!type_id) { |
| return 0; |
| } |
| |
| static constexpr size_t kOpsResultIdx = 1; // operand index of the result |
| |
| std::vector<Operand> ops; |
| ops.reserve(el_count + 2); |
| ops.emplace_back(type_id); |
| ops.push_back(Operand(0u)); // Placeholder for the result ID |
| |
| for (size_t i = 0; i < el_count; i++) { |
| auto id = GenerateConstantIfNeeded(constant->Index(i)); |
| if (!id) { |
| return 0; |
| } |
| ops.emplace_back(id); |
| } |
| |
| auto& global_scope = scope_stack_[0]; |
| return utils::GetOrCreate(global_scope.type_init_to_id_, OperandListKey{ops}, |
| [&]() -> uint32_t { |
| auto result = result_op(); |
| ops[kOpsResultIdx] = result; |
| push_type(spv::Op::OpConstantComposite, std::move(ops)); |
| return std::get<uint32_t>(result); |
| }); |
| }; |
| |
| return Switch( |
| ty, // |
| [&](const type::Bool*) { |
| bool val = constant->ValueAs<bool>(); |
| return GenerateConstantIfNeeded(ScalarConstant::Bool(val)); |
| }, |
| [&](const type::F32*) { |
| auto val = constant->ValueAs<f32>(); |
| return GenerateConstantIfNeeded(ScalarConstant::F32(val.value)); |
| }, |
| [&](const type::F16*) { |
| auto val = constant->ValueAs<f16>(); |
| return GenerateConstantIfNeeded(ScalarConstant::F16(val.value)); |
| }, |
| [&](const type::I32*) { |
| auto val = constant->ValueAs<i32>(); |
| return GenerateConstantIfNeeded(ScalarConstant::I32(val.value)); |
| }, |
| [&](const type::U32*) { |
| auto val = constant->ValueAs<u32>(); |
| return GenerateConstantIfNeeded(ScalarConstant::U32(val.value)); |
| }, |
| [&](const type::Vector* v) { return composite(v->Width()); }, |
| [&](const type::Matrix* m) { return composite(m->columns()); }, |
| [&](const type::Array* a) { |
| auto count = a->ConstantCount(); |
| if (!count) { |
| error_ = type::Array::kErrExpectedConstantCount; |
| return static_cast<uint32_t>(0); |
| } |
| return composite(count.value()); |
| }, |
| [&](const sem::Struct* s) { return composite(s->Members().Length()); }, |
| [&](Default) { |
| error_ = "unhandled constant type: " + builder_.FriendlyName(ty); |
| return 0; |
| }); |
| } |
| |
| uint32_t Builder::GenerateConstantIfNeeded(const ScalarConstant& constant) { |
| auto it = const_to_id_.find(constant); |
| if (it != const_to_id_.end()) { |
| return it->second; |
| } |
| |
| uint32_t type_id = 0; |
| |
| switch (constant.kind) { |
| case ScalarConstant::Kind::kU32: { |
| type_id = GenerateTypeIfNeeded(builder_.create<type::U32>()); |
| break; |
| } |
| case ScalarConstant::Kind::kI32: { |
| type_id = GenerateTypeIfNeeded(builder_.create<type::I32>()); |
| break; |
| } |
| case ScalarConstant::Kind::kF32: { |
| type_id = GenerateTypeIfNeeded(builder_.create<type::F32>()); |
| break; |
| } |
| case ScalarConstant::Kind::kF16: { |
| type_id = GenerateTypeIfNeeded(builder_.create<type::F16>()); |
| break; |
| } |
| case ScalarConstant::Kind::kBool: { |
| type_id = GenerateTypeIfNeeded(builder_.create<type::Bool>()); |
| break; |
| } |
| } |
| |
| if (type_id == 0) { |
| return 0; |
| } |
| |
| auto result = result_op(); |
| auto result_id = std::get<uint32_t>(result); |
| |
| switch (constant.kind) { |
| case ScalarConstant::Kind::kU32: { |
| push_type(spv::Op::OpConstant, {Operand(type_id), result, Operand(constant.value.u32)}); |
| break; |
| } |
| case ScalarConstant::Kind::kI32: { |
| push_type(spv::Op::OpConstant, |
| {Operand(type_id), result, U32Operand(constant.value.i32)}); |
| break; |
| } |
| case ScalarConstant::Kind::kF32: { |
| push_type(spv::Op::OpConstant, {Operand(type_id), result, Operand(constant.value.f32)}); |
| break; |
| } |
| case ScalarConstant::Kind::kF16: { |
| push_type(spv::Op::OpConstant, {Operand(type_id), result, |
| U32Operand(constant.value.f16.bits_representation)}); |
| break; |
| } |
| case ScalarConstant::Kind::kBool: { |
| if (constant.value.b) { |
| push_type(spv::Op::OpConstantTrue, {Operand(type_id), result}); |
| } else { |
| push_type(spv::Op::OpConstantFalse, {Operand(type_id), result}); |
| } |
| break; |
| } |
| } |
| |
| const_to_id_[constant] = result_id; |
| return result_id; |
| } |
| |
| uint32_t Builder::GenerateConstantNullIfNeeded(const type::Type* type) { |
| auto type_id = GenerateTypeIfNeeded(type); |
| if (type_id == 0) { |
| return 0; |
| } |
| |
| return utils::GetOrCreate(const_null_to_id_, type, [&] { |
| auto result = result_op(); |
| |
| push_type(spv::Op::OpConstantNull, {Operand(type_id), result}); |
| |
| return std::get<uint32_t>(result); |
| }); |
| } |
| |
| uint32_t Builder::GenerateConstantVectorSplatIfNeeded(const type::Vector* type, uint32_t value_id) { |
| auto type_id = GenerateTypeIfNeeded(type); |
| if (type_id == 0 || value_id == 0) { |
| return 0; |
| } |
| |
| uint64_t key = (static_cast<uint64_t>(type->Width()) << 32) + value_id; |
| return utils::GetOrCreate(const_splat_to_id_, key, [&] { |
| auto result = result_op(); |
| auto result_id = std::get<uint32_t>(result); |
| |
| OperandList ops; |
| ops.push_back(Operand(type_id)); |
| ops.push_back(result); |
| for (uint32_t i = 0; i < type->Width(); i++) { |
| ops.push_back(Operand(value_id)); |
| } |
| push_type(spv::Op::OpConstantComposite, ops); |
| |
| const_splat_to_id_[key] = result_id; |
| return result_id; |
| }); |
| } |
| |
| uint32_t Builder::GenerateShortCircuitBinaryExpression(const ast::BinaryExpression* expr) { |
| auto lhs_id = GenerateExpression(expr->lhs); |
| if (lhs_id == 0) { |
| return false; |
| } |
| |
| // Get the ID of the basic block where control flow will diverge. It's the |
| // last basic block generated for the left-hand-side of the operator. |
| auto original_label_id = current_label_id_; |
| |
| auto type_id = GenerateTypeIfNeeded(TypeOf(expr)); |
| if (type_id == 0) { |
| return 0; |
| } |
| |
| auto merge_block = result_op(); |
| auto merge_block_id = std::get<uint32_t>(merge_block); |
| |
| auto block = result_op(); |
| auto block_id = std::get<uint32_t>(block); |
| |
| auto true_block_id = block_id; |
| auto false_block_id = merge_block_id; |
| |
| // For a logical or we want to only check the RHS if the LHS is failed. |
| if (expr->IsLogicalOr()) { |
| std::swap(true_block_id, false_block_id); |
| } |
| |
| if (!push_function_inst(spv::Op::OpSelectionMerge, |
| {Operand(merge_block_id), U32Operand(SpvSelectionControlMaskNone)})) { |
| return 0; |
| } |
| if (!push_function_inst(spv::Op::OpBranchConditional, |
| {Operand(lhs_id), Operand(true_block_id), Operand(false_block_id)})) { |
| return 0; |
| } |
| |
| // Output block to check the RHS |
| if (!GenerateLabel(block_id)) { |
| return 0; |
| } |
| auto rhs_id = GenerateExpression(expr->rhs); |
| if (rhs_id == 0) { |
| return 0; |
| } |
| |
| // Get the block ID of the last basic block generated for the right-hand-side |
| // expression. That block will be an immediate predecessor to the merge block. |
| auto rhs_block_id = current_label_id_; |
| if (!push_function_inst(spv::Op::OpBranch, {Operand(merge_block_id)})) { |
| return 0; |
| } |
| |
| // Output the merge block |
| if (!GenerateLabel(merge_block_id)) { |
| return 0; |
| } |
| |
| auto result = result_op(); |
| auto result_id = std::get<uint32_t>(result); |
| |
| if (!push_function_inst(spv::Op::OpPhi, |
| {Operand(type_id), result, Operand(lhs_id), Operand(original_label_id), |
| Operand(rhs_id), Operand(rhs_block_id)})) { |
| return 0; |
| } |
| |
| return result_id; |
| } |
| |
| uint32_t Builder::GenerateSplat(uint32_t scalar_id, const type::Type* vec_type) { |
| // Create a new vector to splat scalar into |
| auto splat_vector = result_op(); |
| auto* splat_vector_type = builder_.create<type::Pointer>( |
| vec_type, builtin::AddressSpace::kFunction, builtin::Access::kReadWrite); |
| push_function_var({Operand(GenerateTypeIfNeeded(splat_vector_type)), splat_vector, |
| U32Operand(ConvertAddressSpace(builtin::AddressSpace::kFunction)), |
| Operand(GenerateConstantNullIfNeeded(vec_type))}); |
| |
| // Splat scalar into vector |
| auto splat_result = result_op(); |
| OperandList ops; |
| ops.push_back(Operand(GenerateTypeIfNeeded(vec_type))); |
| ops.push_back(splat_result); |
| for (size_t i = 0; i < vec_type->As<type::Vector>()->Width(); ++i) { |
| ops.push_back(Operand(scalar_id)); |
| } |
| if (!push_function_inst(spv::Op::OpCompositeConstruct, ops)) { |
| return 0; |
| } |
| |
| return std::get<uint32_t>(splat_result); |
| } |
| |
| uint32_t Builder::GenerateMatrixAddOrSub(uint32_t lhs_id, |
| uint32_t rhs_id, |
| const type::Matrix* type, |
| spv::Op op) { |
| // Example addition of two matrices: |
| // %31 = OpLoad %mat3v4float %m34 |
| // %32 = OpLoad %mat3v4float %m34 |
| // %33 = OpCompositeExtract %v4float %31 0 |
| // %34 = OpCompositeExtract %v4float %32 0 |
| // %35 = OpFAdd %v4float %33 %34 |
| // %36 = OpCompositeExtract %v4float %31 1 |
| // %37 = OpCompositeExtract %v4float %32 1 |
| // %38 = OpFAdd %v4float %36 %37 |
| // %39 = OpCompositeExtract %v4float %31 2 |
| // %40 = OpCompositeExtract %v4float %32 2 |
| // %41 = OpFAdd %v4float %39 %40 |
| // %42 = OpCompositeConstruct %mat3v4float %35 %38 %41 |
| |
| auto* column_type = builder_.create<type::Vector>(type->type(), type->rows()); |
| auto column_type_id = GenerateTypeIfNeeded(column_type); |
| |
| OperandList ops; |
| |
| for (uint32_t i = 0; i < type->columns(); ++i) { |
| // Extract column `i` from lhs mat |
| auto lhs_column_id = result_op(); |
| if (!push_function_inst( |
| spv::Op::OpCompositeExtract, |
| {Operand(column_type_id), lhs_column_id, Operand(lhs_id), Operand(i)})) { |
| return 0; |
| } |
| |
| // Extract column `i` from rhs mat |
| auto rhs_column_id = result_op(); |
| if (!push_function_inst( |
| spv::Op::OpCompositeExtract, |
| {Operand(column_type_id), rhs_column_id, Operand(rhs_id), Operand(i)})) { |
| return 0; |
| } |
| |
| // Add or subtract the two columns |
| auto result = result_op(); |
| if (!push_function_inst(op, |
| {Operand(column_type_id), result, lhs_column_id, rhs_column_id})) { |
| return 0; |
| } |
| |
| ops.push_back(result); |
| } |
| |
| // Create the result matrix from the added/subtracted column vectors |
| auto result_mat_id = result_op(); |
| ops.insert(ops.begin(), result_mat_id); |
| ops.insert(ops.begin(), Operand(GenerateTypeIfNeeded(type))); |
| if (!push_function_inst(spv::Op::OpCompositeConstruct, ops)) { |
| return 0; |
| } |
| |
| return std::get<uint32_t>(result_mat_id); |
| } |
| |
| uint32_t Builder::GenerateBinaryExpression(const ast::BinaryExpression* expr) { |
| // There is special logic for short circuiting operators. |
| if (expr->IsLogicalAnd() || expr->IsLogicalOr()) { |
| return GenerateShortCircuitBinaryExpression(expr); |
| } |
| |
| auto lhs_id = GenerateExpression(expr->lhs); |
| if (lhs_id == 0) { |
| return 0; |
| } |
| |
| auto rhs_id = GenerateExpression(expr->rhs); |
| if (rhs_id == 0) { |
| return 0; |
| } |
| |
| auto result = result_op(); |
| auto result_id = std::get<uint32_t>(result); |
| |
| auto type_id = GenerateTypeIfNeeded(TypeOf(expr)); |
| if (type_id == 0) { |
| return 0; |
| } |
| |
| // Handle int and float and the vectors of those types. Other types |
| // should have been rejected by validation. |
| auto* lhs_type = TypeOf(expr->lhs)->UnwrapRef(); |
| auto* rhs_type = TypeOf(expr->rhs)->UnwrapRef(); |
| |
| // Handle matrix-matrix addition and subtraction |
| if ((expr->IsAdd() || expr->IsSubtract()) && lhs_type->is_float_matrix() && |
| rhs_type->is_float_matrix()) { |
| auto* lhs_mat = lhs_type->As<type::Matrix>(); |
| auto* rhs_mat = rhs_type->As<type::Matrix>(); |
| |
| // This should already have been validated by resolver |
| if (lhs_mat->rows() != rhs_mat->rows() || lhs_mat->columns() != rhs_mat->columns()) { |
| error_ = "matrices must have same dimensionality for add or subtract"; |
| return 0; |
| } |
| |
| return GenerateMatrixAddOrSub(lhs_id, rhs_id, lhs_mat, |
| expr->IsAdd() ? spv::Op::OpFAdd : spv::Op::OpFSub); |
| } |
| |
| // For vector-scalar arithmetic operations, splat scalar into a vector. We |
| // skip this for multiply as we can use OpVectorTimesScalar. |
| const bool is_float_scalar_vector_multiply = |
| expr->IsMultiply() && ((lhs_type->is_float_scalar() && rhs_type->is_float_vector()) || |
| (lhs_type->is_float_vector() && rhs_type->is_float_scalar())); |
| |
| if (expr->IsArithmetic() && !is_float_scalar_vector_multiply) { |
| if (lhs_type->Is<type::Vector>() && rhs_type->is_numeric_scalar()) { |
| uint32_t splat_vector_id = GenerateSplat(rhs_id, lhs_type); |
| if (splat_vector_id == 0) { |
| return 0; |
| } |
| rhs_id = splat_vector_id; |
| rhs_type = lhs_type; |
| |
| } else if (lhs_type->is_numeric_scalar() && rhs_type->Is<type::Vector>()) { |
| uint32_t splat_vector_id = GenerateSplat(lhs_id, rhs_type); |
| if (splat_vector_id == 0) { |
| return 0; |
| } |
| lhs_id = splat_vector_id; |
| lhs_type = rhs_type; |
| } |
| } |
| |
| bool lhs_is_float_or_vec = lhs_type->is_float_scalar_or_vector(); |
| bool lhs_is_bool_or_vec = lhs_type->is_bool_scalar_or_vector(); |
| bool lhs_is_integer_or_vec = lhs_type->is_integer_scalar_or_vector(); |
| bool lhs_is_unsigned = lhs_type->is_unsigned_integer_scalar_or_vector(); |
| |
| spv::Op op = spv::Op::OpNop; |
| if (expr->IsAnd()) { |
| if (lhs_is_integer_or_vec) { |
| op = spv::Op::OpBitwiseAnd; |
| } else if (lhs_is_bool_or_vec) { |
| op = spv::Op::OpLogicalAnd; |
| } else { |
| error_ = "invalid and expression"; |
| return 0; |
| } |
| } else if (expr->IsAdd()) { |
| op = lhs_is_float_or_vec ? spv::Op::OpFAdd : spv::Op::OpIAdd; |
| } else if (expr->IsDivide()) { |
| if (lhs_is_float_or_vec) { |
| op = spv::Op::OpFDiv; |
| } else if (lhs_is_unsigned) { |
| op = spv::Op::OpUDiv; |
| } else { |
| op = spv::Op::OpSDiv; |
| } |
| } else if (expr->IsEqual()) { |
| if (lhs_is_float_or_vec) { |
| op = spv::Op::OpFOrdEqual; |
| } else if (lhs_is_bool_or_vec) { |
| op = spv::Op::OpLogicalEqual; |
| } else if (lhs_is_integer_or_vec) { |
| op = spv::Op::OpIEqual; |
| } else { |
| error_ = "invalid equal expression"; |
| return 0; |
| } |
| } else if (expr->IsGreaterThan()) { |
| if (lhs_is_float_or_vec) { |
| op = spv::Op::OpFOrdGreaterThan; |
| } else if (lhs_is_unsigned) { |
| op = spv::Op::OpUGreaterThan; |
| } else { |
| op = spv::Op::OpSGreaterThan; |
| } |
| } else if (expr->IsGreaterThanEqual()) { |
| if (lhs_is_float_or_vec) { |
| op = spv::Op::OpFOrdGreaterThanEqual; |
| } else if (lhs_is_unsigned) { |
| op = spv::Op::OpUGreaterThanEqual; |
| } else { |
| op = spv::Op::OpSGreaterThanEqual; |
| } |
| } else if (expr->IsLessThan()) { |
| if (lhs_is_float_or_vec) { |
| op = spv::Op::OpFOrdLessThan; |
| } else if (lhs_is_unsigned) { |
| op = spv::Op::OpULessThan; |
| } else { |
| op = spv::Op::OpSLessThan; |
| } |
| } else if (expr->IsLessThanEqual()) { |
| if (lhs_is_float_or_vec) { |
| op = spv::Op::OpFOrdLessThanEqual; |
| } else if (lhs_is_unsigned) { |
| op = spv::Op::OpULessThanEqual; |
| } else { |
| op = spv::Op::OpSLessThanEqual; |
| } |
| } else if (expr->IsModulo()) { |
| if (lhs_is_float_or_vec) { |
| op = spv::Op::OpFRem; |
| } else if (lhs_is_unsigned) { |
| op = spv::Op::OpUMod; |
| } else { |
| op = spv::Op::OpSRem; |
| } |
| } else if (expr->IsMultiply()) { |
| if (lhs_type->is_integer_scalar_or_vector()) { |
| // If the left hand side is an integer then this _has_ to be OpIMul as |
| // there there is no other integer multiplication. |
| op = spv::Op::OpIMul; |
| } else if (lhs_type->is_float_scalar() && rhs_type->is_float_scalar()) { |
| // Float scalars multiply with OpFMul |
| op = spv::Op::OpFMul; |
| } else if (lhs_type->is_float_vector() && rhs_type->is_float_vector()) { |
| // Float vectors must be validated to be the same size and then use OpFMul |
| op = spv::Op::OpFMul; |
| } else if (lhs_type->is_float_scalar() && rhs_type->is_float_vector()) { |
| // Scalar * Vector we need to flip lhs and rhs types |
| // because OpVectorTimesScalar expects <vector>, <scalar> |
| std::swap(lhs_id, rhs_id); |
| op = spv::Op::OpVectorTimesScalar; |
| } else if (lhs_type->is_float_vector() && rhs_type->is_float_scalar()) { |
| // float vector * scalar |
| op = spv::Op::OpVectorTimesScalar; |
| } else if (lhs_type->is_float_scalar() && rhs_type->is_float_matrix()) { |
| // Scalar * Matrix we need to flip lhs and rhs types because |
| // OpMatrixTimesScalar expects <matrix>, <scalar> |
| std::swap(lhs_id, rhs_id); |
| op = spv::Op::OpMatrixTimesScalar; |
| } else if (lhs_type->is_float_matrix() && rhs_type->is_float_scalar()) { |
| // float matrix * scalar |
| op = spv::Op::OpMatrixTimesScalar; |
| } else if (lhs_type->is_float_vector() && rhs_type->is_float_matrix()) { |
| // float vector * matrix |
| op = spv::Op::OpVectorTimesMatrix; |
| } else if (lhs_type->is_float_matrix() && rhs_type->is_float_vector()) { |
| // float matrix * vector |
| op = spv::Op::OpMatrixTimesVector; |
| } else if (lhs_type->is_float_matrix() && rhs_type->is_float_matrix()) { |
| // float matrix * matrix |
| op = spv::Op::OpMatrixTimesMatrix; |
| } else { |
| error_ = "invalid multiply expression"; |
| return 0; |
| } |
| } else if (expr->IsNotEqual()) { |
| if (lhs_is_float_or_vec) { |
| op = spv::Op::OpFOrdNotEqual; |
| } else if (lhs_is_bool_or_vec) { |
| op = spv::Op::OpLogicalNotEqual; |
| } else if (lhs_is_integer_or_vec) { |
| op = spv::Op::OpINotEqual; |
| } else { |
| error_ = "invalid not-equal expression"; |
| return 0; |
| } |
| } else if (expr->IsOr()) { |
| if (lhs_is_integer_or_vec) { |
| op = spv::Op::OpBitwiseOr; |
| } else if (lhs_is_bool_or_vec) { |
| op = spv::Op::OpLogicalOr; |
| } else { |
| error_ = "invalid and expression"; |
| return 0; |
| } |
| } else if (expr->IsShiftLeft()) { |
| op = spv::Op::OpShiftLeftLogical; |
| } else if (expr->IsShiftRight() && lhs_type->is_signed_integer_scalar_or_vector()) { |
| // A shift right with a signed LHS is an arithmetic shift. |
| op = spv::Op::OpShiftRightArithmetic; |
| } else if (expr->IsShiftRight()) { |
| op = spv::Op::OpShiftRightLogical; |
| } else if (expr->IsSubtract()) { |
| op = lhs_is_float_or_vec ? spv::Op::OpFSub : spv::Op::OpISub; |
| } else if (expr->IsXor()) { |
| op = spv::Op::OpBitwiseXor; |
| } else { |
| error_ = "unknown binary expression"; |
| return 0; |
| } |
| |
| if (!push_function_inst(op, {Operand(type_id), result, Operand(lhs_id), Operand(rhs_id)})) { |
| return 0; |
| } |
| return result_id; |
| } |
| |
| bool Builder::GenerateBlockStatement(const ast::BlockStatement* stmt) { |
| PushScope(); |
| TINT_DEFER(PopScope()); |
| return GenerateBlockStatementWithoutScoping(stmt); |
| } |
| |
| bool Builder::GenerateBlockStatementWithoutScoping(const ast::BlockStatement* stmt) { |
| for (auto* block_stmt : stmt->statements) { |
| if (!GenerateStatement(block_stmt)) { |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| uint32_t Builder::GenerateCallExpression(const ast::CallExpression* expr) { |
| auto* call = builder_.Sem().Get<sem::Call>(expr); |
| auto* target = call->Target(); |
| return Switch( |
| target, // |
| [&](const sem::Function* func) { return GenerateFunctionCall(call, func); }, |
| [&](const sem::Builtin* builtin) { return GenerateBuiltinCall(call, builtin); }, |
| [&](const sem::ValueConversion*) { |
| return GenerateValueConstructorOrConversion(call, nullptr); |
| }, |
| [&](const sem::ValueConstructor*) { |
| return GenerateValueConstructorOrConversion(call, nullptr); |
| }, |
| [&](Default) { |
| TINT_ICE(Writer, builder_.Diagnostics()) |
| << "unhandled call target: " << target->TypeInfo().name; |
| return 0; |
| }); |
| } |
| |
| uint32_t Builder::GenerateFunctionCall(const sem::Call* call, const sem::Function* fn) { |
| auto* expr = call->Declaration(); |
| auto* ident = fn->Declaration()->name; |
| |
| auto type_id = GenerateTypeIfNeeded(call->Type()); |
| if (type_id == 0) { |
| return 0; |
| } |
| |
| auto result = result_op(); |
| auto result_id = std::get<uint32_t>(result); |
| |
| OperandList ops = {Operand(type_id), result}; |
| |
| auto func_id = func_symbol_to_id_[ident->symbol]; |
| if (func_id == 0) { |
| error_ = "unable to find called function: " + builder_.Symbols().NameFor(ident->symbol); |
| return 0; |
| } |
| ops.push_back(Operand(func_id)); |
| |
| for (auto* arg : expr->args) { |
| auto id = GenerateExpression(arg); |
| if (id == 0) { |
| return 0; |
| } |
| ops.push_back(Operand(id)); |
| } |
| |
| if (!push_function_inst(spv::Op::OpFunctionCall, std::move(ops))) { |
| return 0; |
| } |
| |
| return result_id; |
| } |
| |
| uint32_t Builder::GenerateBuiltinCall(const sem::Call* call, const sem::Builtin* builtin) { |
| auto result = result_op(); |
| auto result_id = std::get<uint32_t>(result); |
| |
| auto result_type_id = GenerateTypeIfNeeded(builtin->ReturnType()); |
| if (result_type_id == 0) { |
| return 0; |
| } |
| |
| if (builtin->IsFineDerivative() || builtin->IsCoarseDerivative()) { |
| push_capability(SpvCapabilityDerivativeControl); |
| } |
| |
| if (builtin->IsImageQuery()) { |
| push_capability(SpvCapabilityImageQuery); |
| } |
| |
| if (builtin->IsTexture()) { |
| if (!GenerateTextureBuiltin(call, builtin, Operand(result_type_id), result)) { |
| return 0; |
| } |
| return result_id; |
| } |
| |
| if (builtin->IsBarrier()) { |
| if (!GenerateControlBarrierBuiltin(builtin)) { |
| return 0; |
| } |
| return result_id; |
| } |
| |
| if (builtin->IsAtomic()) { |
| if (!GenerateAtomicBuiltin(call, builtin, Operand(result_type_id), result)) { |
| return 0; |
| } |
| return result_id; |
| } |
| |
| // Generates the SPIR-V ID for the expression for the indexed call argument, |
| // and loads it if necessary. Returns 0 on error. |
| auto get_arg_as_value_id = [&](size_t i, bool generate_load = true) -> uint32_t { |
| auto* arg = call->Arguments()[i]; |
| auto* param = builtin->Parameters()[i]; |
| auto val_id = GenerateExpression(arg->Declaration()); |
| if (val_id == 0) { |
| return 0; |
| } |
| |
| if (generate_load && !param->Type()->Is<type::Pointer>()) { |
| val_id = GenerateLoadIfNeeded(arg->Type(), val_id); |
| } |
| return val_id; |
| }; |
| |
| OperandList params = {Operand(result_type_id), result}; |
| spv::Op op = spv::Op::OpNop; |
| |
| // Pushes the arguments for a GlslStd450 extended instruction, and sets op |
| // to OpExtInst. |
| auto glsl_std450 = [&](uint32_t inst_id) { |
| auto set_id = GetGLSLstd450Import(); |
| params.push_back(Operand(set_id)); |
| params.push_back(Operand(inst_id)); |
| op = spv::Op::OpExtInst; |
| }; |
| |
| switch (builtin->Type()) { |
| case builtin::Function::kAny: |
| if (builtin->Parameters()[0]->Type()->Is<type::Bool>()) { |
| // any(v: bool) just resolves to v. |
| return get_arg_as_value_id(0); |
| } |
| op = spv::Op::OpAny; |
| break; |
| case builtin::Function::kAll: |
| if (builtin->Parameters()[0]->Type()->Is<type::Bool>()) { |
| // all(v: bool) just resolves to v. |
| return get_arg_as_value_id(0); |
| } |
| op = spv::Op::OpAll; |
| break; |
| case builtin::Function::kArrayLength: { |
| auto* address_of = call->Arguments()[0]->Declaration()->As<ast::UnaryOpExpression>(); |
| if (!address_of || address_of->op != ast::UnaryOp::kAddressOf) { |
| error_ = "arrayLength() expected pointer to member access, got " + |
| std::string(address_of->TypeInfo().name); |
| return 0; |
| } |
| auto* array_expr = address_of->expr; |
| |
| auto* accessor = array_expr->As<ast::MemberAccessorExpression>(); |
| if (!accessor) { |
| error_ = "arrayLength() expected pointer to member access, got pointer to " + |
| std::string(array_expr->TypeInfo().name); |
| return 0; |
| } |
| |
| auto struct_id = GenerateExpression(accessor->object); |
| if (struct_id == 0) { |
| return 0; |
| } |
| params.push_back(Operand(struct_id)); |
| |
| auto* type = TypeOf(accessor->object)->UnwrapRef(); |
| if (!type->Is<sem::Struct>()) { |
| error_ = "invalid type (" + type->FriendlyName(builder_.Symbols()) + |
| ") for runtime array length"; |
| return 0; |
| } |
| // Runtime array must be the last member in the structure |
| params.push_back( |
| Operand(uint32_t(type->As<sem::Struct>()->Declaration()->members.Length() - 1))); |
| |
| if (!push_function_inst(spv::Op::OpArrayLength, params)) { |
| return 0; |
| } |
| return result_id; |
| } |
| case builtin::Function::kCountOneBits: |
| op = spv::Op::OpBitCount; |
| break; |
| case builtin::Function::kDot: { |
| op = spv::Op::OpDot; |
| auto* vec_ty = builtin->Parameters()[0]->Type()->As<type::Vector>(); |
| if (vec_ty->type()->is_integer_scalar()) { |
| // TODO(crbug.com/tint/1267): OpDot requires floating-point types, but |
| // WGSL also supports integer types. SPV_KHR_integer_dot_product adds |
| // support for integer vectors. Use it if it is available. |
| auto el_ty = Operand(GenerateTypeIfNeeded(vec_ty->type())); |
| auto vec_a = Operand(get_arg_as_value_id(0)); |
| auto vec_b = Operand(get_arg_as_value_id(1)); |
| if (std::get<uint32_t>(vec_a) == 0 || std::get<uint32_t>(vec_b) == 0) { |
| return 0; |
| } |
| |
| auto sum = Operand(0u); |
| for (uint32_t i = 0; i < vec_ty->Width(); i++) { |
| auto a = result_op(); |
| auto b = result_op(); |
| auto mul = result_op(); |
| if (!push_function_inst(spv::Op::OpCompositeExtract, |
| {el_ty, a, vec_a, Operand(i)}) || |
| !push_function_inst(spv::Op::OpCompositeExtract, |
| {el_ty, b, vec_b, Operand(i)}) || |
| !push_function_inst(spv::Op::OpIMul, {el_ty, mul, a, b})) { |
| return 0; |
| } |
| if (i == 0) { |
| sum = mul; |
| } else { |
| auto prev_sum = sum; |
| auto is_last_el = i == (vec_ty->Width() - 1); |
| sum = is_last_el ? Operand(result_id) : result_op(); |
| if (!push_function_inst(spv::Op::OpIAdd, {el_ty, sum, prev_sum, mul})) { |
| return 0; |
| } |
| } |
| } |
| return result_id; |
| } |
| break; |
| } |
| case builtin::Function::kDpdx: |
| op = spv::Op::OpDPdx; |
| break; |
| case builtin::Function::kDpdxCoarse: |
| op = spv::Op::OpDPdxCoarse; |
| break; |
| case builtin::Function::kDpdxFine: |
| op = spv::Op::OpDPdxFine; |
| break; |
| case builtin::Function::kDpdy: |
| op = spv::Op::OpDPdy; |
| break; |
| case builtin::Function::kDpdyCoarse: |
| op = spv::Op::OpDPdyCoarse; |
| break; |
| case builtin::Function::kDpdyFine: |
| op = spv::Op::OpDPdyFine; |
| break; |
| case builtin::Function::kExtractBits: |
| op = builtin->Parameters()[0]->Type()->is_unsigned_integer_scalar_or_vector() |
| ? spv::Op::OpBitFieldUExtract |
| : spv::Op::OpBitFieldSExtract; |
| break; |
| case builtin::Function::kFwidth: |
| op = spv::Op::OpFwidth; |
| break; |
| case builtin::Function::kFwidthCoarse: |
| op = spv::Op::OpFwidthCoarse; |
| break; |
| case builtin::Function::kFwidthFine: |
| op = spv::Op::OpFwidthFine; |
| break; |
| case builtin::Function::kInsertBits: |
| op = spv::Op::OpBitFieldInsert; |
| break; |
| case builtin::Function::kMix: { |
| auto std450 = Operand(GetGLSLstd450Import()); |
| |
| auto a_id = get_arg_as_value_id(0); |
| auto b_id = get_arg_as_value_id(1); |
| auto f_id = get_arg_as_value_id(2); |
| if (!a_id || !b_id || !f_id) { |
| return 0; |
| } |
| |
| // If the interpolant is scalar but the objects are vectors, we need to |
| // splat the interpolant into a vector of the same size. |
| auto* result_vector_type = builtin->ReturnType()->As<type::Vector>(); |
| if (result_vector_type && builtin->Parameters()[2]->Type()->is_scalar()) { |
| f_id = GenerateSplat(f_id, builtin->Parameters()[0]->Type()); |
| if (f_id == 0) { |
| return 0; |
| } |
| } |
| |
| if (!push_function_inst(spv::Op::OpExtInst, {Operand(result_type_id), result, std450, |
| U32Operand(GLSLstd450FMix), Operand(a_id), |
| Operand(b_id), Operand(f_id)})) { |
| return 0; |
| } |
| return result_id; |
| } |
| case builtin::Function::kQuantizeToF16: |
| op = spv::Op::OpQuantizeToF16; |
| break; |
| case builtin::Function::kReverseBits: |
| op = spv::Op::OpBitReverse; |
| break; |
| case builtin::Function::kSelect: { |
| // Note: Argument order is different in WGSL and SPIR-V |
| auto cond_id = get_arg_as_value_id(2); |
| auto true_id = get_arg_as_value_id(1); |
| auto false_id = get_arg_as_value_id(0); |
| if (!cond_id || !true_id || !false_id) { |
| return 0; |
| } |
| |
| // If the condition is scalar but the objects are vectors, we need to |
| // splat the condition into a vector of the same size. |
| // TODO(jrprice): If we're targeting SPIR-V 1.4, we don't need to do this. |
| auto* result_vector_type = builtin->ReturnType()->As<type::Vector>(); |
| if (result_vector_type && builtin->Parameters()[2]->Type()->is_scalar()) { |
| auto* bool_vec_ty = builder_.create<type::Vector>(builder_.create<type::Bool>(), |
| result_vector_type->Width()); |
| if (!GenerateTypeIfNeeded(bool_vec_ty)) { |
| return 0; |
| } |
| cond_id = GenerateSplat(cond_id, bool_vec_ty); |
| if (cond_id == 0) { |
| return 0; |
| } |
| } |
| |
| if (!push_function_inst(spv::Op::OpSelect, |
| {Operand(result_type_id), result, Operand(cond_id), |
| Operand(true_id), Operand(false_id)})) { |
| return 0; |
| } |
| return result_id; |
| } |
| case builtin::Function::kTranspose: |
| op = spv::Op::OpTranspose; |
| break; |
| case builtin::Function::kAbs: |
| if (builtin->ReturnType()->is_unsigned_integer_scalar_or_vector()) { |
| // abs() only operates on *signed* integers. |
| // This is a no-op for unsigned integers. |
| return get_arg_as_value_id(0); |
| } |
| if (builtin->ReturnType()->is_float_scalar_or_vector()) { |
| glsl_std450(GLSLstd450FAbs); |
| } else { |
| glsl_std450(GLSLstd450SAbs); |
| } |
| break; |
| case builtin::Function::kDot4I8Packed: { |
| auto first_param_id = get_arg_as_value_id(0); |
| auto second_param_id = get_arg_as_value_id(1); |
| if (!push_function_inst(spv::Op::OpSDotKHR, |
| {Operand(result_type_id), result, Operand(first_param_id), |
| Operand(second_param_id), |
| Operand(static_cast<uint32_t>( |
| spv::PackedVectorFormat::PackedVectorFormat4x8BitKHR))})) { |
| return 0; |
| } |
| return result_id; |
| } |
| case builtin::Function::kDot4U8Packed: { |
| auto first_param_id = get_arg_as_value_id(0); |
| auto second_param_id = get_arg_as_value_id(1); |
| if (!push_function_inst(spv::Op::OpUDotKHR, |
| {Operand(result_type_id), result, Operand(first_param_id), |
| Operand(second_param_id), |
| Operand(static_cast<uint32_t>( |
| spv::PackedVectorFormat::PackedVectorFormat4x8BitKHR))})) { |
| return 0; |
| } |
| return result_id; |
| } |
| default: { |
| auto inst_id = builtin_to_glsl_method(builtin); |
| if (inst_id == 0) { |
| error_ = "unknown method " + std::string(builtin->str()); |
| return 0; |
| } |
| glsl_std450(inst_id); |
| break; |
| } |
| } |
| |
| if (op == spv::Op::OpNop) { |
| error_ = "unable to determine operator for: " + std::string(builtin->str()); |
| return 0; |
| } |
| |
| for (size_t i = 0; i < call->Arguments().Length(); i++) { |
| if (auto val_id = get_arg_as_value_id(i)) { |
| params.emplace_back(Operand(val_id)); |
| } else { |
| return 0; |
| } |
| } |
| |
| if (!push_function_inst(op, params)) { |
| return 0; |
| } |
| |
| return result_id; |
| } |
| |
| bool Builder::GenerateTextureBuiltin(const sem::Call* call, |
| const sem::Builtin* builtin, |
| Operand result_type, |
| Operand result_id) { |
| using Usage = sem::ParameterUsage; |
| |
| auto& signature = builtin->Signature(); |
| auto& arguments = call->Arguments(); |
| |
| // Generates the given expression, returning the operand ID |
| auto gen = [&](const sem::ValueExpression* expr) { return Operand(GenerateExpression(expr)); }; |
| |
| // Returns the argument with the given usage |
| auto arg = [&](Usage usage) { |
| int idx = signature.IndexOf(usage); |
| return (idx >= 0) ? arguments[static_cast<size_t>(idx)] : nullptr; |
| }; |
| |
| // Generates the argument with the given usage, returning the operand ID |
| auto gen_arg = [&](Usage usage) { |
| auto* argument = arg(usage); |
| if (TINT_UNLIKELY(!argument)) { |
| TINT_ICE(Writer, builder_.Diagnostics()) |
| << "missing argument " << static_cast<int>(usage); |
| } |
| return gen(argument); |
| }; |
| |
| auto* texture = arg(Usage::kTexture); |
| if (TINT_UNLIKELY(!texture)) { |
| TINT_ICE(Writer, builder_.Diagnostics()) << "missing texture argument"; |
| } |
| |
| auto* texture_type = texture->Type()->UnwrapRef()->As<type::Texture>(); |
| |
| auto op = spv::Op::OpNop; |
| |
| // Custom function to call after the texture-builtin op has been generated. |
| std::function<bool()> post_emission = [] { return true; }; |
| |
| // Populate the spirv_params with common parameters |
| OperandList spirv_params; |
| spirv_params.reserve(8); // Enough to fit most parameter lists |
| |
| // Extra image operands, appended to spirv_params. |
| struct ImageOperand { |
| SpvImageOperandsMask mask; |
| Operand operand; |
| }; |
| std::vector<ImageOperand> image_operands; |
| image_operands.reserve(4); // Enough to fit most parameter lists |
| |
| // Appends `result_type` and `result_id` to `spirv_params` |
| auto append_result_type_and_id_to_spirv_params = [&]() { |
| spirv_params.emplace_back(std::move(result_type)); |
| spirv_params.emplace_back(std::move(result_id)); |
| }; |
| |
| // Appends a result type and id to `spirv_params`, possibly adding a |
| // post_emission step. |
| // |
| // If the texture is a depth texture, then this function wraps the result of |
| // the op with a OpCompositeExtract to evaluate to the first element of the |
| // returned vector. This is done as the WGSL texture reading functions for |
| // depths return a single float scalar instead of a vector. |
| // |
| // If the texture is not a depth texture, then this function simply delegates |
| // to calling append_result_type_and_id_to_spirv_params(). |
| auto append_result_type_and_id_to_spirv_params_for_read = [&]() { |
| if (texture_type->IsAnyOf<type::DepthTexture, type::DepthMultisampledTexture>()) { |
| auto* f32 = builder_.create<type::F32>(); |
| auto* spirv_result_type = builder_.create<type::Vector>(f32, 4u); |
| auto spirv_result = result_op(); |
| post_emission = [=] { |
| return push_function_inst(spv::Op::OpCompositeExtract, |
| {result_type, result_id, spirv_result, Operand(0u)}); |
| }; |
| auto spirv_result_type_id = GenerateTypeIfNeeded(spirv_result_type); |
| if (spirv_result_type_id == 0) { |
| return false; |
| } |
| spirv_params.emplace_back(Operand(spirv_result_type_id)); |
| spirv_params.emplace_back(spirv_result); |
| return true; |
| } |
| |
| append_result_type_and_id_to_spirv_params(); |
| return true; |
| }; |
| |
| // Appends a result type and id to `spirv_params`, by first swizzling the |
| // result of the op with `swizzle`. |
| auto append_result_type_and_id_to_spirv_params_swizzled = [&](uint32_t spirv_result_width, |
| std::vector<uint32_t> swizzle) { |
| if (swizzle.empty()) { |
| append_result_type_and_id_to_spirv_params(); |
| } else { |
| // Assign post_emission to swizzle the result of the call to |
| // OpImageQuerySize[Lod]. |
| auto* element_type = ElementTypeOf(call->Type()); |
| auto spirv_result = result_op(); |
| auto* spirv_result_type = |
| builder_.create<type::Vector>(element_type, spirv_result_width); |
| if (swizzle.size() > 1) { |
| post_emission = [=] { |
| OperandList operands{ |
| result_type, |
| result_id, |
| spirv_result, |
| spirv_result, |
| }; |
| for (auto idx : swizzle) { |
| operands.emplace_back(Operand(idx)); |
| } |
| return push_function_inst(spv::Op::OpVectorShuffle, operands); |
| }; |
| } else { |
| post_emission = [=] { |
| return push_function_inst( |
| spv::Op::OpCompositeExtract, |
| {result_type, result_id, spirv_result, Operand(swizzle[0])}); |
| }; |
| } |
| auto spirv_result_type_id = GenerateTypeIfNeeded(spirv_result_type); |
| if (spirv_result_type_id == 0) { |
| return false; |
| } |
| spirv_params.emplace_back(Operand(spirv_result_type_id)); |
| spirv_params.emplace_back(spirv_result); |
| } |
| return true; |
| }; |
| |
| auto append_coords_to_spirv_params = [&]() -> bool { |
| if (auto* array_index = arg(Usage::kArrayIndex)) { |
| // Array index needs to be appended to the coordinates. |
| auto* packed = AppendVector(&builder_, arg(Usage::kCoords)->Declaration(), |
| array_index->Declaration()); |
| auto param = GenerateExpression(packed); |
| if (param == 0) { |
| return false; |
| } |
| spirv_params.emplace_back(Operand(param)); |
| } else { |
| spirv_params.emplace_back(gen_arg(Usage::kCoords)); // coordinates |
| } |
| return true; |
| }; |
| |
| auto append_image_and_coords_to_spirv_params = [&]() -> bool { |
| auto sampler_param = gen_arg(Usage::kSampler); |
| auto texture_param = gen_arg(Usage::kTexture); |
| auto sampled_image = GenerateSampledImage(texture_type, texture_param, sampler_param); |
| |
| // Populate the spirv_params with the common parameters |
| spirv_params.emplace_back(Operand(sampled_image)); // sampled image |
| return append_coords_to_spirv_params(); |
| }; |
| |
| switch (builtin->Type()) { |
| case builtin::Function::kTextureDimensions: { |
| // Number of returned elements from OpImageQuerySize[Lod] may not match |
| // those of textureDimensions(). |
| // This might be due to an extra vector scalar describing the number of |
| // array elements or textureDimensions() returning a vec3 for cubes |
| // when only width / height is returned by OpImageQuerySize[Lod] |
| // (see https://github.com/gpuweb/gpuweb/issues/1345). |
| // Handle these mismatches by swizzling the returned vector. |
| std::vector<uint32_t> swizzle; |
| uint32_t spirv_dims = 0; |
| switch (texture_type->dim()) { |
| case type::TextureDimension::kNone: |
| error_ = "texture dimension is kNone"; |
| return false; |
| case type::TextureDimension::k1d: |
| case type::TextureDimension::k2d: |
| case type::TextureDimension::k3d: |
| case type::TextureDimension::kCube: |
| break; // No swizzle needed |
| case type::TextureDimension::kCubeArray: |
| case type::TextureDimension::k2dArray: |
| swizzle = {0, 1}; // Strip array index |
| spirv_dims = 3; // [width, height, array_count] |
| break; |
| } |
| |
| if (!append_result_type_and_id_to_spirv_params_swizzled(spirv_dims, swizzle)) { |
| return false; |
| } |
| |
| spirv_params.emplace_back(gen_arg(Usage::kTexture)); |
| if (texture_type->IsAnyOf<type::MultisampledTexture, // |
| type::DepthMultisampledTexture, // |
| type::StorageTexture>()) { |
| op = spv::Op::OpImageQuerySize; |
| } else if (auto* level = arg(Usage::kLevel)) { |
| op = spv::Op::OpImageQuerySizeLod; |
| spirv_params.emplace_back(gen(level)); |
| } else { |
| op = spv::Op::OpImageQuerySizeLod; |
| spirv_params.emplace_back( |
| Operand(GenerateConstantIfNeeded(ScalarConstant::I32(0)))); |
| } |
| break; |
| } |
| case builtin::Function::kTextureNumLayers: { |
| uint32_t spirv_dims = 0; |
| switch (texture_type->dim()) { |
| default: |
| error_ = "texture is not arrayed"; |
| return false; |
| case type::TextureDimension::k2dArray: |
| case type::TextureDimension::kCubeArray: |
| spirv_dims = 3; |
| break; |
| } |
| |
| // OpImageQuerySize[Lod] packs the array count as the last element of the |
| // returned vector. Extract this. |
| if (!append_result_type_and_id_to_spirv_params_swizzled(spirv_dims, {spirv_dims - 1})) { |
| return false; |
| } |
| |
| spirv_params.emplace_back(gen_arg(Usage::kTexture)); |
| |
| if (texture_type->Is<type::MultisampledTexture>() || |
| texture_type->Is<type::StorageTexture>()) { |
| op = spv::Op::OpImageQuerySize; |
| } else { |
| op = spv::Op::OpImageQuerySizeLod; |
| spirv_params.emplace_back( |
| Operand(GenerateConstantIfNeeded(ScalarConstant::I32(0)))); |
| } |
| break; |
| } |
| case builtin::Function::kTextureNumLevels: { |
| op = spv::Op::OpImageQueryLevels; |
| append_result_type_and_id_to_spirv_params(); |
| spirv_params.emplace_back(gen_arg(Usage::kTexture)); |
| break; |
| } |
| case builtin::Function::kTextureNumSamples: { |
| op = spv::Op::OpImageQuerySamples; |
| append_result_type_and_id_to_spirv_params(); |
| spirv_params.emplace_back(gen_arg(Usage::kTexture)); |
| break; |
| } |
| case builtin::Function::kTextureLoad: { |
| op = texture_type->Is<type::StorageTexture>() ? spv::Op::OpImageRead |
| : spv::Op::OpImageFetch; |
| append_result_type_and_id_to_spirv_params_for_read(); |
| spirv_params.emplace_back(gen_arg(Usage::kTexture)); |
| if (!append_coords_to_spirv_params()) { |
| return false; |
| } |
| |
| if (auto* level = arg(Usage::kLevel)) { |
| image_operands.emplace_back(ImageOperand{SpvImageOperandsLodMask, gen(level)}); |
| } |
| |
| if (auto* sample_index = arg(Usage::kSampleIndex)) { |
| image_operands.emplace_back( |
| ImageOperand{SpvImageOperandsSampleMask, gen(sample_index)}); |
| } |
| |
| break; |
| } |
| case builtin::Function::kTextureStore: { |
| op = spv::Op::OpImageWrite; |
| spirv_params.emplace_back(gen_arg(Usage::kTexture)); |
| if (!append_coords_to_spirv_params()) { |
| return false; |
| } |
| spirv_params.emplace_back(gen_arg(Usage::kValue)); |
| break; |
| } |
| case builtin::Function::kTextureGather: { |
| op = spv::Op::OpImageGather; |
| append_result_type_and_id_to_spirv_params(); |
| if (!append_image_and_coords_to_spirv_params()) { |
| return false; |
| } |
| if (signature.IndexOf(Usage::kComponent) < 0) { |
| spirv_params.emplace_back( |
| Operand(GenerateConstantIfNeeded(ScalarConstant::I32(0)))); |
| } else { |
| spirv_params.emplace_back(gen_arg(Usage::kComponent)); |
| } |
| break; |
| } |
| case builtin::Function::kTextureGatherCompare: { |
| op = spv::Op::OpImageDrefGather; |
| append_result_type_and_id_to_spirv_params(); |
| if (!append_image_and_coords_to_spirv_params()) { |
| return false; |
| } |
| spirv_params.emplace_back(gen_arg(Usage::kDepthRef)); |
| break; |
| } |
| case builtin::Function::kTextureSample: { |
| op = spv::Op::OpImageSampleImplicitLod; |
| append_result_type_and_id_to_spirv_params_for_read(); |
| if (!append_image_and_coords_to_spirv_params()) { |
| return false; |
| } |
| break; |
| } |
| case builtin::Function::kTextureSampleBias: { |
| op = spv::Op::OpImageSampleImplicitLod; |
| append_result_type_and_id_to_spirv_params_for_read(); |
| if (!append_image_and_coords_to_spirv_params()) { |
| return false; |
| } |
| image_operands.emplace_back( |
| ImageOperand{SpvImageOperandsBiasMask, gen_arg(Usage::kBias)}); |
| break; |
| } |
| case builtin::Function::kTextureSampleLevel: { |
| op = spv::Op::OpImageSampleExplicitLod; |
| append_result_type_and_id_to_spirv_params_for_read(); |
| if (!append_image_and_coords_to_spirv_params()) { |
| return false; |
| } |
| auto level = Operand(0u); |
| if (arg(Usage::kLevel)->Type()->UnwrapRef()->IsAnyOf<type::I32, type::U32>()) { |
| // Depth textures have i32 or u32 parameters for the level, but SPIR-V expects f32. |
| // Cast. |
| auto f32_type_id = GenerateTypeIfNeeded(builder_.create<type::F32>()); |
| if (f32_type_id == 0) { |
| return 0; |
| } |
| level = result_op(); |
| if (!push_function_inst(spv::Op::OpConvertSToF, |
| {Operand(f32_type_id), level, gen_arg(Usage::kLevel)})) { |
| return 0; |
| } |
| } else { |
| level = gen_arg(Usage::kLevel); |
| } |
| image_operands.emplace_back(ImageOperand{SpvImageOperandsLodMask, level}); |
| break; |
| } |
| case builtin::Function::kTextureSampleGrad: { |
| op = spv::Op::OpImageSampleExplicitLod; |
| append_result_type_and_id_to_spirv_params_for_read(); |
| if (!append_image_and_coords_to_spirv_params()) { |
| return false; |
| } |
| image_operands.emplace_back( |
| ImageOperand{SpvImageOperandsGradMask, gen_arg(Usage::kDdx)}); |
| image_operands.emplace_back( |
| ImageOperand{SpvImageOperandsGradMask, gen_arg(Usage::kDdy)}); |
| break; |
| } |
| case builtin::Function::kTextureSampleCompare: { |
| op = spv::Op::OpImageSampleDrefImplicitLod; |
| append_result_type_and_id_to_spirv_params(); |
| if (!append_image_and_coords_to_spirv_params()) { |
| return false; |
| } |
| spirv_params.emplace_back(gen_arg(Usage::kDepthRef)); |
| break; |
| } |
| case builtin::Function::kTextureSampleCompareLevel: { |
| op = spv::Op::OpImageSampleDrefExplicitLod; |
| append_result_type_and_id_to_spirv_params(); |
| if (!append_image_and_coords_to_spirv_params()) { |
| return false; |
| } |
| spirv_params.emplace_back(gen_arg(Usage::kDepthRef)); |
| |
| image_operands.emplace_back( |
| ImageOperand{SpvImageOperandsLodMask, |
| Operand(GenerateConstantIfNeeded(ScalarConstant::F32(0.0)))}); |
| break; |
| } |
| default: |
| TINT_UNREACHABLE(Writer, builder_.Diagnostics()); |
| return false; |
| } |
| |
| if (auto* offset = arg(Usage::kOffset)) { |
| image_operands.emplace_back(ImageOperand{SpvImageOperandsConstOffsetMask, gen(offset)}); |
| } |
| |
| if (!image_operands.empty()) { |
| std::sort(image_operands.begin(), image_operands.end(), |
| [](auto& a, auto& b) { return a.mask < b.mask; }); |
| uint32_t mask = 0; |
| for (auto& image_operand : image_operands) { |
| mask |= image_operand.mask; |
| } |
| spirv_params.emplace_back(Operand(mask)); |
| for (auto& image_operand : image_operands) { |
| spirv_params.emplace_back(image_operand.operand); |
| } |
| } |
| |
| if (op == spv::Op::OpNop) { |
| error_ = "unable to determine operator for: " + std::string(builtin->str()); |
| return false; |
| } |
| |
| if (!push_function_inst(op, spirv_params)) { |
| return false; |
| } |
| |
| return post_emission(); |
| } |
| |
| bool Builder::GenerateControlBarrierBuiltin(const sem::Builtin* builtin) { |
| auto const op = spv::Op::OpControlBarrier; |
| uint32_t execution = 0; |
| uint32_t memory = 0; |
| uint32_t semantics = 0; |
| |
| // TODO(crbug.com/tint/661): Combine sequential barriers to a single |
| // instruction. |
| if (builtin->Type() == builtin::Function::kWorkgroupBarrier) { |
| execution = static_cast<uint32_t>(spv::Scope::Workgroup); |
| memory = static_cast<uint32_t>(spv::Scope::Workgroup); |
| semantics = static_cast<uint32_t>(spv::MemorySemanticsMask::AcquireRelease) | |
| static_cast<uint32_t>(spv::MemorySemanticsMask::WorkgroupMemory); |
| } else if (builtin->Type() == builtin::Function::kStorageBarrier) { |
| execution = static_cast<uint32_t>(spv::Scope::Workgroup); |
| memory = static_cast<uint32_t>(spv::Scope::Workgroup); |
| semantics = static_cast<uint32_t>(spv::MemorySemanticsMask::AcquireRelease) | |
| static_cast<uint32_t>(spv::MemorySemanticsMask::UniformMemory); |
| } else { |
| error_ = "unexpected barrier builtin type "; |
| error_ += builtin::str(builtin->Type()); |
| return false; |
| } |
| |
| auto execution_id = GenerateConstantIfNeeded(ScalarConstant::U32(execution)); |
| auto memory_id = GenerateConstantIfNeeded(ScalarConstant::U32(memory)); |
| auto semantics_id = GenerateConstantIfNeeded(ScalarConstant::U32(semantics)); |
| if (execution_id == 0 || memory_id == 0 || semantics_id == 0) { |
| return false; |
| } |
| |
| return push_function_inst(op, { |
| Operand(execution_id), |
| Operand(memory_id), |
| Operand(semantics_id), |
| }); |
| } |
| |
| bool Builder::GenerateAtomicBuiltin(const sem::Call* call, |
| const sem::Builtin* builtin, |
| Operand result_type, |
| Operand result_id) { |
| auto is_value_signed = [&] { return builtin->Parameters()[1]->Type()->Is<type::I32>(); }; |
| |
| auto address_space = builtin->Parameters()[0]->Type()->As<type::Pointer>()->AddressSpace(); |
| |
| uint32_t memory_id = 0; |
| switch (builtin->Parameters()[0]->Type()->As<type::Pointer>()->AddressSpace()) { |
| case builtin::AddressSpace::kWorkgroup: |
| memory_id = GenerateConstantIfNeeded( |
| ScalarConstant::U32(static_cast<uint32_t>(spv::Scope::Workgroup))); |
| break; |
| case builtin::AddressSpace::kStorage: |
| memory_id = GenerateConstantIfNeeded( |
| ScalarConstant::U32(static_cast<uint32_t>(spv::Scope::Device))); |
| break; |
| default: |
| TINT_UNREACHABLE(Writer, builder_.Diagnostics()) |
| << "unhandled atomic address space " << address_space; |
| return false; |
| } |
| if (memory_id == 0) { |
| return false; |
| } |
| |
| uint32_t semantics_id = GenerateConstantIfNeeded( |
| ScalarConstant::U32(static_cast<uint32_t>(spv::MemorySemanticsMask::MaskNone))); |
| if (semantics_id == 0) { |
| return false; |
| } |
| |
| uint32_t pointer_id = GenerateExpression(call->Arguments()[0]); |
| if (pointer_id == 0) { |
| return false; |
| } |
| |
| uint32_t value_id = 0; |
| if (call->Arguments().Length() > 1) { |
| value_id = GenerateExpression(call->Arguments().Back()); |
| if (value_id == 0) { |
| return false; |
| } |
| } |
| |
| Operand pointer = Operand(pointer_id); |
| Operand value = Operand(value_id); |
| Operand memory = Operand(memory_id); |
| Operand semantics = Operand(semantics_id); |
| |
| switch (builtin->Type()) { |
| case builtin::Function::kAtomicLoad: |
| return push_function_inst(spv::Op::OpAtomicLoad, { |
| result_type, |
| result_id, |
| pointer, |
| memory, |
| semantics, |
| }); |
| case builtin::Function::kAtomicStore: |
| return push_function_inst(spv::Op::OpAtomicStore, { |
| pointer, |
| memory, |
| semantics, |
| value, |
| }); |
| case builtin::Function::kAtomicAdd: |
| return push_function_inst(spv::Op::OpAtomicIAdd, { |
| result_type, |
| result_id, |
| pointer, |
| memory, |
| semantics, |
| value, |
| }); |
| case builtin::Function::kAtomicSub: |
| return push_function_inst(spv::Op::OpAtomicISub, { |
| result_type, |
| result_id, |
| pointer, |
| memory, |
| semantics, |
| value, |
| }); |
| case builtin::Function::kAtomicMax: |
| return push_function_inst( |
| is_value_signed() ? spv::Op::OpAtomicSMax : spv::Op::OpAtomicUMax, { |
| result_type, |
| result_id, |
| pointer, |
| memory, |
| semantics, |
| value, |
| }); |
| case builtin::Function::kAtomicMin: |
| return push_function_inst( |
| is_value_signed() ? spv::Op::OpAtomicSMin : spv::Op::OpAtomicUMin, { |
| result_type, |
| result_id, |
| pointer, |
| memory, |
| semantics, |
| value, |
| }); |
| case builtin::Function::kAtomicAnd: |
| return push_function_inst(spv::Op::OpAtomicAnd, { |
| result_type, |
| result_id, |
| pointer, |
| memory, |
| semantics, |
| value, |
| }); |
| case builtin::Function::kAtomicOr: |
| return push_function_inst(spv::Op::OpAtomicOr, { |
| result_type, |
| result_id, |
| pointer, |
| memory, |
| semantics, |
| value, |
| }); |
| case builtin::Function::kAtomicXor: |
| return push_function_inst(spv::Op::OpAtomicXor, { |
| result_type, |
| result_id, |
| pointer, |
| memory, |
| semantics, |
| value, |
| }); |
| case builtin::Function::kAtomicExchange: |
| return push_function_inst(spv::Op::OpAtomicExchange, { |
| result_type, |
| result_id, |
| pointer, |
| memory, |
| semantics, |
| value, |
| }); |
| case builtin::Function::kAtomicCompareExchangeWeak: { |
| auto comparator = GenerateExpression(call->Arguments()[1]); |
| if (comparator == 0) { |
| return false; |
| } |
| |
| auto* value_sem_type = call->Target()->Signature().parameters[2]->Type(); |
| |
| auto value_type = GenerateTypeIfNeeded(value_sem_type); |
| if (value_type == 0) { |
| return false; |
| } |
| |
| auto* bool_sem_ty = builder_.create<type::Bool>(); |
| auto bool_type = GenerateTypeIfNeeded(bool_sem_ty); |
| if (bool_type == 0) { |
| return false; |
| } |
| |
| // original_value := OpAtomicCompareExchange(pointer, memory, semantics, |
| // semantics, value, comparator) |
| auto original_value = result_op(); |
| if (!push_function_inst(spv::Op::OpAtomicCompareExchange, { |
| Operand(value_type), |
| original_value, |
| pointer, |
| memory, |
| semantics, |
| semantics, |
| value, |
| Operand(comparator), |
| })) { |
| return false; |
| } |
| |
| // https://registry.khronos.org/SPIR-V/specs/unified1/SPIRV.html#OpAtomicCompareExchange |
| // According to SPIR-V spec, during the atomic steps of OpAtomicCompareExchange, the new |
| // value will be stored only if original value equals to comparator, and the result of |
| // OpAtomicCompareExchange is the original value. Therefore to check if the exchanging |
| // has been executed, we should compare the result original_value to comparator. |
| |
| // values_equal := original_value == comparator |
| auto values_equal = result_op(); |
| if (!push_function_inst(spv::Op::OpIEqual, { |
| Operand(bool_type), |
| values_equal, |
| original_value, |
| Operand(comparator), |
| })) { |
| return false; |
| } |
| |
| // result := __atomic_compare_exchange_result<T>(original_value, values_equal) |
| return push_function_inst(spv::Op::OpCompositeConstruct, { |
| result_type, |
| result_id, |
| original_value, |
| values_equal, |
| }); |
| } |
| default: |
| TINT_UNREACHABLE(Writer, builder_.Diagnostics()) |
| << "unhandled atomic builtin " << builtin->Type(); |
| return false; |
| } |
| } |
| |
| uint32_t Builder::GenerateSampledImage(const type::Type* texture_type, |
| Operand texture_operand, |
| Operand sampler_operand) { |
| // DepthTexture is always declared as SampledTexture. |
| // The Vulkan spec says: The "Depth" operand of OpTypeImage is ignored. |
| // In SPIRV, 0 means not depth, 1 means depth, and 2 means unknown. |
| // Using anything other than 0 is problematic on various Vulkan drivers. |
| if (auto* depthTextureType = texture_type->As<type::DepthTexture>()) { |
| texture_type = builder_.create<type::SampledTexture>(depthTextureType->dim(), |
| builder_.create<type::F32>()); |
| } |
| |
| uint32_t sampled_image_type_id = |
| utils::GetOrCreate(texture_type_to_sampled_image_type_id_, texture_type, [&] { |
| // We need to create the sampled image type and cache the result. |
| auto sampled_image_type = result_op(); |
| auto texture_type_id = GenerateTypeIfNeeded(texture_type); |
| push_type(spv::Op::OpTypeSampledImage, {sampled_image_type, Operand(texture_type_id)}); |
| return std::get<uint32_t>(sampled_image_type); |
| }); |
| |
| auto sampled_image = result_op(); |
| if (!push_function_inst(spv::Op::OpSampledImage, {Operand(sampled_image_type_id), sampled_image, |
| texture_operand, sampler_operand})) { |
| return 0; |
| } |
| |
| return std::get<uint32_t>(sampled_image); |
| } |
| |
| uint32_t Builder::GenerateBitcastExpression(const ast::BitcastExpression* expr) { |
| auto result = result_op(); |
| auto result_id = std::get<uint32_t>(result); |
| |
| auto result_type_id = GenerateTypeIfNeeded(TypeOf(expr)); |
| if (result_type_id == 0) { |
| return 0; |
| } |
| |
| auto val_id = GenerateExpression(expr->expr); |
| if (val_id == 0) { |
| return 0; |
| } |
| |
| // Bitcast does not allow same types, just emit a CopyObject |
| auto* to_type = TypeOf(expr)->UnwrapRef(); |
| auto* from_type = TypeOf(expr->expr)->UnwrapRef(); |
| if (to_type == from_type) { |
| if (!push_function_inst(spv::Op::OpCopyObject, |
| {Operand(result_type_id), result, Operand(val_id)})) { |
| return 0; |
| } |
| return result_id; |
| } |
| |
| if (!push_function_inst(spv::Op::OpBitcast, |
| {Operand(result_type_id), result, Operand(val_id)})) { |
| return 0; |
| } |
| |
| return result_id; |
| } |
| |
| bool Builder::GenerateConditionalBlock(const ast::Expression* cond, |
| const ast::BlockStatement* true_body, |
| const ast::Statement* else_stmt) { |
| auto cond_id = GenerateExpression(cond); |
| if (cond_id == 0) { |
| return false; |
| } |
| |
| auto merge_block = result_op(); |
| auto merge_block_id = std::get<uint32_t>(merge_block); |
| |
| if (!push_function_inst(spv::Op::OpSelectionMerge, |
| {Operand(merge_block_id), U32Operand(SpvSelectionControlMaskNone)})) { |
| return false; |
| } |
| |
| auto true_block = result_op(); |
| auto true_block_id = std::get<uint32_t>(true_block); |
| |
| // if there are no more else statements we branch on false to the merge |
| // block otherwise we branch to the false block |
| auto false_block_id = else_stmt ? next_id() : merge_block_id; |
| |
| if (!push_function_inst(spv::Op::OpBranchConditional, |
| {Operand(cond_id), Operand(true_block_id), Operand(false_block_id)})) { |
| return false; |
| } |
| |
| // Output true block |
| if (!GenerateLabel(true_block_id)) { |
| return false; |
| } |
| if (!GenerateBlockStatement(true_body)) { |
| return false; |
| } |
| // We only branch if the last element of the body didn't already branch. |
| if (InsideBasicBlock()) { |
| if (!push_function_inst(spv::Op::OpBranch, {Operand(merge_block_id)})) { |
| return false; |
| } |
| } |
| |
| // Start the false block if needed |
| if (false_block_id != merge_block_id) { |
| if (!GenerateLabel(false_block_id)) { |
| return false; |
| } |
| |
| // Handle the else case by just outputting the statements. |
| if (auto* block = else_stmt->As<ast::BlockStatement>()) { |
| if (!GenerateBlockStatement(block)) { |
| return false; |
| } |
| } else { |
| auto* elseif = else_stmt->As<ast::IfStatement>(); |
| if (!GenerateConditionalBlock(elseif->condition, elseif->body, |
| elseif->else_statement)) { |
| return false; |
| } |
| } |
| if (InsideBasicBlock()) { |
| if (!push_function_inst(spv::Op::OpBranch, {Operand(merge_block_id)})) { |
| return false; |
| } |
| } |
| } |
| |
| // Output the merge block |
| return GenerateLabel(merge_block_id); |
| } |
| |
| bool Builder::GenerateIfStatement(const ast::IfStatement* stmt) { |
| if (!GenerateConditionalBlock(stmt->condition, stmt->body, stmt->else_statement)) { |
| return false; |
| } |
| return true; |
| } |
| |
| bool Builder::GenerateSwitchStatement(const ast::SwitchStatement* stmt) { |
| auto merge_block = result_op(); |
| auto merge_block_id = std::get<uint32_t>(merge_block); |
| |
| merge_stack_.push_back(merge_block_id); |
| |
| auto cond_id = GenerateExpression(stmt->condition); |
| if (cond_id == 0) { |
| return false; |
| } |
| |
| auto default_block = result_op(); |
| auto default_block_id = std::get<uint32_t>(default_block); |
| |
| OperandList params = {Operand(cond_id), Operand(default_block_id)}; |
| |
| std::vector<uint32_t> case_ids; |
| for (const auto* item : stmt->body) { |
| auto block_id = default_block_id; |
| if (!item->ContainsDefault()) { |
| auto block = result_op(); |
| block_id = std::get<uint32_t>(block); |
| } |
| case_ids.push_back(block_id); |
| |
| // If this case statement is only a default selector skip adding the block |
| // as it will be done below. |
| if (item->selectors.Length() == 1 && item->ContainsDefault()) { |
| continue; |
| } |
| |
| auto* sem = builder_.Sem().Get<sem::CaseStatement>(item); |
| for (auto* selector : sem->Selectors()) { |
| if (selector->IsDefault()) { |
| continue; |
| } |
| |
| params.push_back(Operand(selector->Value()->ValueAs<u32>())); |
| params.push_back(Operand(block_id)); |
| } |
| } |
| |
| if (!push_function_inst(spv::Op::OpSelectionMerge, |
| {Operand(merge_block_id), U32Operand(SpvSelectionControlMaskNone)})) { |
| return false; |
| } |
| if (!push_function_inst(spv::Op::OpSwitch, params)) { |
| return false; |
| } |
| |
| bool generated_default = false; |
| auto& body = stmt->body; |
| // We output the case statements in order they were entered in the original |
| // source. The branch is to the merge block which comes after the switch statement. |
| for (uint32_t i = 0; i < body.Length(); i++) { |
| auto* item = body[i]; |
| |
| if (item->ContainsDefault()) { |
| generated_default = true; |
| } |
| |
| if (!GenerateLabel(case_ids[i])) { |
| return false; |
| } |
| if (!GenerateBlockStatement(item->body)) { |
| return false; |
| } |
| if (InsideBasicBlock()) { |
| if (!push_function_inst(spv::Op::OpBranch, {Operand(merge_block_id)})) { |
| return false; |
| } |
| } |
| } |
| |
| if (!generated_default) { |
| if (!GenerateLabel(default_block_id)) { |
| return false; |
| } |
| if (!push_function_inst(spv::Op::OpBranch, {Operand(merge_block_id)})) { |
| return false; |
| } |
| } |
| |
| merge_stack_.pop_back(); |
| |
| return GenerateLabel(merge_block_id); |
| } |
| |
| bool Builder::GenerateReturnStatement(const ast::ReturnStatement* stmt) { |
| if (stmt->value) { |
| auto val_id = GenerateExpression(stmt->value); |
| if (val_id == 0) { |
| return false; |
| } |
| if (!push_function_inst(spv::Op::OpReturnValue, {Operand(val_id)})) { |
| return false; |
| } |
| } else { |
| if (!push_function_inst(spv::Op::OpReturn, {})) { |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| bool Builder::GenerateLoopStatement(const ast::LoopStatement* stmt) { |
| auto loop_header = result_op(); |
| auto loop_header_id = std::get<uint32_t>(loop_header); |
| if (!push_function_inst(spv::Op::OpBranch, {Operand(loop_header_id)})) { |
| return false; |
| } |
| if (!GenerateLabel(loop_header_id)) { |
| return false; |
| } |
| |
| auto merge_block = result_op(); |
| auto merge_block_id = std::get<uint32_t>(merge_block); |
| auto continue_block = result_op(); |
| auto continue_block_id = std::get<uint32_t>(continue_block); |
| |
| auto body_block = result_op(); |
| auto body_block_id = std::get<uint32_t>(body_block); |
| |
| if (!push_function_inst(spv::Op::OpLoopMerge, |
| {Operand(merge_block_id), Operand(continue_block_id), |
| U32Operand(SpvLoopControlMaskNone)})) { |
| return false; |
| } |
| |
| continue_stack_.push_back(continue_block_id); |
| merge_stack_.push_back(merge_block_id); |
| |
| // Usually, the backedge is a simple branch. This will be modified if the |
| // backedge block in the continuing construct has an exiting edge. |
| backedge_stack_.emplace_back(spv::Op::OpBranch, OperandList{Operand(loop_header_id)}); |
| |
| if (!push_function_inst(spv::Op::OpBranch, {Operand(body_block_id)})) { |
| return false; |
| } |
| if (!GenerateLabel(body_block_id)) { |
| return false; |
| } |
| |
| // We need variables from the body to be visible in the continuing block, so |
| // manage scope outside of GenerateBlockStatement. |
| { |
| PushScope(); |
| TINT_DEFER(PopScope()); |
| |
| if (!GenerateBlockStatementWithoutScoping(stmt->body)) { |
| return false; |
| } |
| |
| // We only branch if the last element of the body didn't already branch. |
| if (InsideBasicBlock()) { |
| if (!push_function_inst(spv::Op::OpBranch, {Operand(continue_block_id)})) { |
| return false; |
| } |
| } |
| |
| if (!GenerateLabel(continue_block_id)) { |
| return false; |
| } |
| if (stmt->continuing && !stmt->continuing->Empty()) { |
| continuing_stack_.emplace_back(stmt->continuing->Last(), loop_header_id, |
| merge_block_id); |
| if (!GenerateBlockStatementWithoutScoping(stmt->continuing)) { |
| return false; |
| } |
| continuing_stack_.pop_back(); |
| } |
| } |
| |
| // Generate the backedge. |
| TINT_ASSERT(Writer, !backedge_stack_.empty()); |
| const Backedge& backedge = backedge_stack_.back(); |
| if (!push_function_inst(backedge.opcode, backedge.operands)) { |
| return false; |
| } |
| backedge_stack_.pop_back(); |
| |
| merge_stack_.pop_back(); |
| continue_stack_.pop_back(); |
| |
| return GenerateLabel(merge_block_id); |
| } |
| |
| bool Builder::GenerateStatement(const ast::Statement* stmt) { |
| return Switch( |
| stmt, [&](const ast::AssignmentStatement* a) { return GenerateAssignStatement(a); }, |
| [&](const ast::BlockStatement* b) { return GenerateBlockStatement(b); }, |
| [&](const ast::BreakStatement* b) { return GenerateBreakStatement(b); }, |
| [&](const ast::BreakIfStatement* b) { return GenerateBreakIfStatement(b); }, |
| [&](const ast::CallStatement* c) { return GenerateCallExpression(c->expr) != 0; }, |
| [&](const ast::ContinueStatement* c) { return GenerateContinueStatement(c); }, |
| [&](const ast::DiscardStatement* d) { return GenerateDiscardStatement(d); }, |
| [&](const ast::IfStatement* i) { return GenerateIfStatement(i); }, |
| [&](const ast::LoopStatement* l) { return GenerateLoopStatement(l); }, |
| [&](const ast::ReturnStatement* r) { return GenerateReturnStatement(r); }, |
| [&](const ast::SwitchStatement* s) { return GenerateSwitchStatement(s); }, |
| [&](const ast::VariableDeclStatement* v) { return GenerateVariableDeclStatement(v); }, |
| [&](const ast::ConstAssert*) { |
| return true; // Not emitted |
| }, |
| [&](Default) { |
| error_ = "unknown statement type: " + std::string(stmt->TypeInfo().name); |
| return false; |
| }); |
| } |
| |
| bool Builder::GenerateVariableDeclStatement(const ast::VariableDeclStatement* stmt) { |
| return GenerateFunctionVariable(stmt->variable); |
| } |
| |
| uint32_t Builder::GenerateTypeIfNeeded(const type::Type* type) { |
| if (type == nullptr) { |
| error_ = "attempting to generate type from null type"; |
| return 0; |
| } |
| |
| // Atomics are a type in WGSL, but aren't a distinct type in SPIR-V. |
| // Just emit the type inside the atomic. |
| if (auto* atomic = type->As<type::Atomic>()) { |
| return GenerateTypeIfNeeded(atomic->Type()); |
| } |
| |
| // DepthTexture is always declared as SampledTexture. |
| // The Vulkan spec says: The "Depth" operand of OpTypeImage is ignored. |
| // In SPIRV, 0 means not depth, 1 means depth, and 2 means unknown. |
| // Using anything other than 0 is problematic on various Vulkan drivers. |
| if (auto* depthTextureType = type->As<type::DepthTexture>()) { |
| type = builder_.create<type::SampledTexture>(depthTextureType->dim(), |
| builder_.create<type::F32>()); |
| } else if (auto* multisampledDepthTextureType = type->As<type::DepthMultisampledTexture>()) { |
| type = builder_.create<type::MultisampledTexture>(multisampledDepthTextureType->dim(), |
| builder_.create<type::F32>()); |
| } |
| |
| // Pointers and references with differing accesses should not result in a |
| // different SPIR-V types, so we explicitly ignore the access. |
| // Pointers and References both map to a SPIR-V pointer type. |
| // Transform a Reference to a Pointer to prevent these having duplicated |
| // definitions in the generated SPIR-V. Note that nested pointers and |
| // references are not legal in WGSL, so only considering the top-level type is |
| // fine. |
| if (auto* ptr = type->As<type::Pointer>()) { |
| type = builder_.create<type::Pointer>(ptr->StoreType(), ptr->AddressSpace(), |
| builtin::Access::kReadWrite); |
| } else if (auto* ref = type->As<type::Reference>()) { |
| type = builder_.create<type::Pointer>(ref->StoreType(), ref->AddressSpace(), |
| builtin::Access::kReadWrite); |
| } |
| |
| return utils::GetOrCreate(type_to_id_, type, [&]() -> uint32_t { |
| auto result = result_op(); |
| auto id = std::get<uint32_t>(result); |
| bool ok = Switch( |
| type, |
| [&](const type::Array* arr) { // |
| return GenerateArrayType(arr, result); |
| }, |
| [&](const type::Bool*) { |
| push_type(spv::Op::OpTypeBool, {result}); |
| return true; |
| }, |
| [&](const type::F32*) { |
| push_type(spv::Op::OpTypeFloat, {result, Operand(32u)}); |
| return true; |
| }, |
| [&](const type::F16*) { |
| push_type(spv::Op::OpTypeFloat, {result, Operand(16u)}); |
| return true; |
| }, |
| [&](const type::I32*) { |
| push_type(spv::Op::OpTypeInt, {result, Operand(32u), Operand(1u)}); |
| return true; |
| }, |
| [&](const type::Matrix* mat) { // |
| return GenerateMatrixType(mat, result); |
| }, |
| [&](const type::Pointer* ptr) { // |
| return GeneratePointerType(ptr, result); |
| }, |
| [&](const type::Reference* ref) { // |
| return GenerateReferenceType(ref, result); |
| }, |
| [&](const sem::Struct* str) { // |
| return GenerateStructType(str, result); |
| }, |
| [&](const type::U32*) { |
| push_type(spv::Op::OpTypeInt, {result, Operand(32u), Operand(0u)}); |
| return true; |
| }, |
| [&](const type::Vector* vec) { // |
| return GenerateVectorType(vec, result); |
| }, |
| [&](const type::Void*) { |
| push_type(spv::Op::OpTypeVoid, {result}); |
| return true; |
| }, |
| [&](const type::StorageTexture* tex) { |
| if (!GenerateTextureType(tex, result)) { |
| return false; |
| } |
| |
| // Register all three access types of StorageTexture names. In |
| // SPIR-V, we must output a single type, while the variable is |
| // annotated with the access type. Doing this ensures we de-dupe. |
| type_to_id_[builder_.create<type::StorageTexture>( |
| tex->dim(), tex->texel_format(), builtin::Access::kRead, tex->type())] = id; |
| type_to_id_[builder_.create<type::StorageTexture>( |
| tex->dim(), tex->texel_format(), builtin::Access::kWrite, tex->type())] = id; |
| type_to_id_[builder_.create<type::StorageTexture>( |
| tex->dim(), tex->texel_format(), builtin::Access::kReadWrite, tex->type())] = |
| id; |
| return true; |
| }, |
| [&](const type::Texture* tex) { return GenerateTextureType(tex, result); }, |
| [&](const type::Sampler* s) { |
| push_type(spv::Op::OpTypeSampler, {result}); |
| |
| // Register both of the sampler type names. In SPIR-V they're the same |
| // sampler type, so we need to match that when we do the dedup check. |
| if (s->kind() == type::SamplerKind::kSampler) { |
| type_to_id_[builder_.create<type::Sampler>( |
| type::SamplerKind::kComparisonSampler)] = id; |
| } else { |
| type_to_id_[builder_.create<type::Sampler>(type::SamplerKind::kSampler)] = id; |
| } |
| return true; |
| }, |
| [&](Default) { |
| error_ = "unable to convert type: " + type->FriendlyName(builder_.Symbols()); |
| return false; |
| }); |
| |
| if (!ok) { |
| return 0; |
| } |
| |
| return id; |
| }); |
| } |
| |
| bool Builder::GenerateTextureType(const type::Texture* texture, const Operand& result) { |
| if (TINT_UNLIKELY(texture->Is<type::ExternalTexture>())) { |
| TINT_ICE(Writer, builder_.Diagnostics()) |
| << "Multiplanar external texture transform was not run."; |
| return false; |
| } |
| |
| uint32_t array_literal = 0u; |
| const auto dim = texture->dim(); |
| if (dim == type::TextureDimension::k2dArray || dim == type::TextureDimension::kCubeArray) { |
| array_literal = 1u; |
| } |
| |
| uint32_t dim_literal = SpvDim2D; |
| if (dim == type::TextureDimension::k1d) { |
| dim_literal = SpvDim1D; |
| if (texture->Is<type::SampledTexture>()) { |
| push_capability(SpvCapabilitySampled1D); |
| } else if (texture->Is<type::StorageTexture>()) { |
| push_capability(SpvCapabilityImage1D); |
| } |
| } |
| if (dim == type::TextureDimension::k3d) { |
| dim_literal = SpvDim3D; |
| } |
| if (dim == type::TextureDimension::kCube || dim == type::TextureDimension::kCubeArray) { |
| dim_literal = SpvDimCube; |
| } |
| |
| uint32_t ms_literal = 0u; |
| if (texture->IsAnyOf<type::MultisampledTexture, type::DepthMultisampledTexture>()) { |
| ms_literal = 1u; |
| } |
| |
| uint32_t depth_literal = 0u; |
| // The Vulkan spec says: The "Depth" operand of OpTypeImage is ignored. |
| // In SPIRV, 0 means not depth, 1 means depth, and 2 means unknown. |
| // Using anything other than 0 is problematic on various Vulkan drivers. |
| |
| uint32_t sampled_literal = 2u; |
| if (texture->IsAnyOf<type::MultisampledTexture, type::SampledTexture, type::DepthTexture, |
| type::DepthMultisampledTexture>()) { |
| sampled_literal = 1u; |
| } |
| |
| if (dim == type::TextureDimension::kCubeArray) { |
| if (texture->IsAnyOf<type::SampledTexture, type::DepthTexture>()) { |
| push_capability(SpvCapabilitySampledCubeArray); |
| } |
| } |
| |
| uint32_t type_id = Switch( |
| texture, |
| [&](const type::DepthTexture*) { |
| return GenerateTypeIfNeeded(builder_.create<type::F32>()); |
| }, |
| [&](const type::DepthMultisampledTexture*) { |
| return GenerateTypeIfNeeded(builder_.create<type::F32>()); |
| }, |
| [&](const type::SampledTexture* t) { return GenerateTypeIfNeeded(t->type()); }, |
| [&](const type::MultisampledTexture* t) { return GenerateTypeIfNeeded(t->type()); }, |
| [&](const type::StorageTexture* t) { return GenerateTypeIfNeeded(t->type()); }, |
| [&](Default) { return 0u; }); |
| if (type_id == 0u) { |
| return false; |
| } |
| |
| uint32_t format_literal = SpvImageFormat_::SpvImageFormatUnknown; |
| if (auto* t = texture->As<type::StorageTexture>()) { |
| format_literal = convert_texel_format_to_spv(t->texel_format()); |
| } |
| |
| push_type(spv::Op::OpTypeImage, |
| {result, Operand(type_id), Operand(dim_literal), Operand(depth_literal), |
| Operand(array_literal), Operand(ms_literal), Operand(sampled_literal), |
| Operand(format_literal)}); |
| |
| return true; |
| } |
| |
| bool Builder::GenerateArrayType(const type::Array* arr, const Operand& result) { |
| auto elem_type = GenerateTypeIfNeeded(arr->ElemType()); |
| if (elem_type == 0) { |
| return false; |
| } |
| |
| auto result_id = std::get<uint32_t>(result); |
| if (arr->Count()->Is<type::RuntimeArrayCount>()) { |
| push_type(spv::Op::OpTypeRuntimeArray, {result, Operand(elem_type)}); |
| } else { |
| auto count = arr->ConstantCount(); |
| if (!count) { |
| error_ = type::Array::kErrExpectedConstantCount; |
| return static_cast<uint32_t>(0); |
| } |
| |
| auto len_id = GenerateConstantIfNeeded(ScalarConstant::U32(count.value())); |
| if (len_id == 0) { |
| return false; |
| } |
| |
| push_type(spv::Op::OpTypeArray, {result, Operand(elem_type), Operand(len_id)}); |
| } |
| |
| push_annot(spv::Op::OpDecorate, |
| {Operand(result_id), U32Operand(SpvDecorationArrayStride), Operand(arr->Stride())}); |
| return true; |
| } |
| |
| bool Builder::GenerateMatrixType(const type::Matrix* mat, const Operand& result) { |
| auto* col_type = builder_.create<type::Vector>(mat->type(), mat->rows()); |
| auto col_type_id = GenerateTypeIfNeeded(col_type); |
| if (has_error()) { |
| return false; |
| } |
| |
| push_type(spv::Op::OpTypeMatrix, {result, Operand(col_type_id), Operand(mat->columns())}); |
| return true; |
| } |
| |
| bool Builder::GeneratePointerType(const type::Pointer* ptr, const Operand& result) { |
| auto subtype_id = GenerateTypeIfNeeded(ptr->StoreType()); |
| if (subtype_id == 0) { |
| return false; |
| } |
| |
| auto stg_class = ConvertAddressSpace(ptr->AddressSpace()); |
| if (stg_class == SpvStorageClassMax) { |
| error_ = "invalid address space for pointer"; |
| return false; |
| } |
| |
| push_type(spv::Op::OpTypePointer, {result, U32Operand(stg_class), Operand(subtype_id)}); |
| |
| return true; |
| } |
| |
| bool Builder::GenerateReferenceType(const type::Reference* ref, const Operand& result) { |
| auto subtype_id = GenerateTypeIfNeeded(ref->StoreType()); |
| if (subtype_id == 0) { |
| return false; |
| } |
| |
| auto stg_class = ConvertAddressSpace(ref->AddressSpace()); |
| if (stg_class == SpvStorageClassMax) { |
| error_ = "invalid address space for reference"; |
| return false; |
| } |
| |
| push_type(spv::Op::OpTypePointer, {result, U32Operand(stg_class), Operand(subtype_id)}); |
| |
| return true; |
| } |
| |
| bool Builder::GenerateStructType(const sem::Struct* struct_type, const Operand& result) { |
| auto struct_id = std::get<uint32_t>(result); |
| |
| if (struct_type->Name().IsValid()) { |
| push_debug(spv::Op::OpName, |
| {Operand(struct_id), Operand(builder_.Symbols().NameFor(struct_type->Name()))}); |
| } |
| |
| OperandList ops; |
| ops.push_back(result); |
| |
| auto* decl = struct_type->Declaration(); |
| if (decl && ast::HasAttribute<transform::AddBlockAttribute::BlockAttribute>(decl->attributes)) { |
| push_annot(spv::Op::OpDecorate, {Operand(struct_id), U32Operand(SpvDecorationBlock)}); |
| } |
| |
| for (uint32_t i = 0; i < struct_type->Members().Length(); ++i) { |
| auto mem_id = GenerateStructMember(struct_id, i, struct_type->Members()[i]); |
| if (mem_id == 0) { |
| return false; |
| } |
| |
| ops.push_back(Operand(mem_id)); |
| } |
| |
| push_type(spv::Op::OpTypeStruct, std::move(ops)); |
| return true; |
| } |
| |
| uint32_t Builder::GenerateStructMember(uint32_t struct_id, |
| uint32_t idx, |
| const sem::StructMember* member) { |
| push_debug(spv::Op::OpMemberName, {Operand(struct_id), Operand(idx), |
| Operand(builder_.Symbols().NameFor(member->Name()))}); |
| |
| // Note: This will generate layout annotations for *all* structs, whether or |
| // not they are used in host-shareable variables. This is officially ok in |
| // SPIR-V 1.0 through 1.3. If / when we migrate to using SPIR-V 1.4 we'll have |
| // to only generate the layout info for structs used for certain storage |
| // classes. |
| |
| push_annot(spv::Op::OpMemberDecorate, |
| {Operand(struct_id), Operand(idx), U32Operand(SpvDecorationOffset), |
| Operand(member->Offset())}); |
| |
| // Infer and emit matrix layout. |
| auto* matrix_type = GetNestedMatrixType(member->Type()); |
| if (matrix_type) { |
| push_annot(spv::Op::OpMemberDecorate, |
| {Operand(struct_id), Operand(idx), U32Operand(SpvDecorationColMajor)}); |
| const uint32_t scalar_elem_size = matrix_type->type()->Size(); |
| const uint32_t effective_row_count = (matrix_type->rows() == 2) ? 2 : 4; |
| push_annot(spv::Op::OpMemberDecorate, |
| {Operand(struct_id), Operand(idx), U32Operand(SpvDecorationMatrixStride), |
| Operand(effective_row_count * scalar_elem_size)}); |
| } |
| |
| return GenerateTypeIfNeeded(member->Type()); |
| } |
| |
| bool Builder::GenerateVectorType(const type::Vector* vec, const Operand& result) { |
| auto type_id = GenerateTypeIfNeeded(vec->type()); |
| if (has_error()) { |
| return false; |
| } |
| |
| push_type(spv::Op::OpTypeVector, {result, Operand(type_id), Operand(vec->Width())}); |
| return true; |
| } |
| |
| SpvStorageClass Builder::ConvertAddressSpace(builtin::AddressSpace klass) const { |
| switch (klass) { |
| case builtin::AddressSpace::kIn: |
| return SpvStorageClassInput; |
| case builtin::AddressSpace::kOut: |
| return SpvStorageClassOutput; |
| case builtin::AddressSpace::kUniform: |
| return SpvStorageClassUniform; |
| case builtin::AddressSpace::kWorkgroup: |
| return SpvStorageClassWorkgroup; |
| case builtin::AddressSpace::kPushConstant: |
| return SpvStorageClassPushConstant; |
| case builtin::AddressSpace::kHandle: |
| return SpvStorageClassUniformConstant; |
| case builtin::AddressSpace::kStorage: |
| return SpvStorageClassStorageBuffer; |
| case builtin::AddressSpace::kPrivate: |
| return SpvStorageClassPrivate; |
| case builtin::AddressSpace::kFunction: |
| return SpvStorageClassFunction; |
| case builtin::AddressSpace::kUndefined: |
| break; |
| } |
| return SpvStorageClassMax; |
| } |
| |
| SpvBuiltIn Builder::ConvertBuiltin(builtin::BuiltinValue builtin, builtin::AddressSpace storage) { |
| switch (builtin) { |
| case builtin::BuiltinValue::kPosition: |
| if (storage == builtin::AddressSpace::kIn) { |
| return SpvBuiltInFragCoord; |
| } else if (TINT_LIKELY(storage == builtin::AddressSpace::kOut)) { |
| return SpvBuiltInPosition; |
| } else { |
| TINT_ICE(Writer, builder_.Diagnostics()) << "invalid address space for builtin"; |
| break; |
| } |
| case builtin::BuiltinValue::kVertexIndex: |
| return SpvBuiltInVertexIndex; |
| case builtin::BuiltinValue::kInstanceIndex: |
| return SpvBuiltInInstanceIndex; |
| case builtin::BuiltinValue::kFrontFacing: |
| return SpvBuiltInFrontFacing; |
| case builtin::BuiltinValue::kFragDepth: |
| return SpvBuiltInFragDepth; |
| case builtin::BuiltinValue::kLocalInvocationId: |
| return SpvBuiltInLocalInvocationId; |
| case builtin::BuiltinValue::kLocalInvocationIndex: |
| return SpvBuiltInLocalInvocationIndex; |
| case builtin::BuiltinValue::kGlobalInvocationId: |
| return SpvBuiltInGlobalInvocationId; |
| case builtin::BuiltinValue::kPointSize: |
| return SpvBuiltInPointSize; |
| case builtin::BuiltinValue::kWorkgroupId: |
| return SpvBuiltInWorkgroupId; |
| case builtin::BuiltinValue::kNumWorkgroups: |
| return SpvBuiltInNumWorkgroups; |
| case builtin::BuiltinValue::kSampleIndex: |
| push_capability(SpvCapabilitySampleRateShading); |
| return SpvBuiltInSampleId; |
| case builtin::BuiltinValue::kSampleMask: |
| return SpvBuiltInSampleMask; |
| case builtin::BuiltinValue::kUndefined: |
| break; |
| } |
| return SpvBuiltInMax; |
| } |
| |
| void Builder::AddInterpolationDecorations(uint32_t id, |
| builtin::InterpolationType type, |
| builtin::InterpolationSampling sampling) { |
| switch (type) { |
| case builtin::InterpolationType::kLinear: |
| push_annot(spv::Op::OpDecorate, {Operand(id), U32Operand(SpvDecorationNoPerspective)}); |
| break; |
| case builtin::InterpolationType::kFlat: |
| push_annot(spv::Op::OpDecorate, {Operand(id), U32Operand(SpvDecorationFlat)}); |
| break; |
| case builtin::InterpolationType::kPerspective: |
| case builtin::InterpolationType::kUndefined: |
| break; |
| } |
| switch (sampling) { |
| case builtin::InterpolationSampling::kCentroid: |
| push_annot(spv::Op::OpDecorate, {Operand(id), U32Operand(SpvDecorationCentroid)}); |
| break; |
| case builtin::InterpolationSampling::kSample: |
| push_capability(SpvCapabilitySampleRateShading); |
| push_annot(spv::Op::OpDecorate, {Operand(id), U32Operand(SpvDecorationSample)}); |
| break; |
| case builtin::InterpolationSampling::kCenter: |
| case builtin::InterpolationSampling::kUndefined: |
| break; |
| } |
| } |
| |
| SpvImageFormat Builder::convert_texel_format_to_spv(const builtin::TexelFormat format) { |
| switch (format) { |
| case builtin::TexelFormat::kBgra8Unorm: |
| TINT_ICE(Writer, builder_.Diagnostics()) |
| << "bgra8unorm should have been polyfilled to rgba8unorm"; |
| return SpvImageFormatUnknown; |
| case builtin::TexelFormat::kR32Uint: |
| return SpvImageFormatR32ui; |
| case builtin::TexelFormat::kR32Sint: |
| return SpvImageFormatR32i; |
| case builtin::TexelFormat::kR32Float: |
| return SpvImageFormatR32f; |
| case builtin::TexelFormat::kRgba8Unorm: |
| return SpvImageFormatRgba8; |
| case builtin::TexelFormat::kRgba8Snorm: |
| return SpvImageFormatRgba8Snorm; |
| case builtin::TexelFormat::kRgba8Uint: |
| return SpvImageFormatRgba8ui; |
| case builtin::TexelFormat::kRgba8Sint: |
| return SpvImageFormatRgba8i; |
| case builtin::TexelFormat::kRg32Uint: |
| push_capability(SpvCapabilityStorageImageExtendedFormats); |
| return SpvImageFormatRg32ui; |
| case builtin::TexelFormat::kRg32Sint: |
| push_capability(SpvCapabilityStorageImageExtendedFormats); |
| return SpvImageFormatRg32i; |
| case builtin::TexelFormat::kRg32Float: |
| push_capability(SpvCapabilityStorageImageExtendedFormats); |
| return SpvImageFormatRg32f; |
| case builtin::TexelFormat::kRgba16Uint: |
| return SpvImageFormatRgba16ui; |
| case builtin::TexelFormat::kRgba16Sint: |
| return SpvImageFormatRgba16i; |
| case builtin::TexelFormat::kRgba16Float: |
| return SpvImageFormatRgba16f; |
| case builtin::TexelFormat::kRgba32Uint: |
| return SpvImageFormatRgba32ui; |
| case builtin::TexelFormat::kRgba32Sint: |
| return SpvImageFormatRgba32i; |
| case builtin::TexelFormat::kRgba32Float: |
| return SpvImageFormatRgba32f; |
| case builtin::TexelFormat::kUndefined: |
| return SpvImageFormatUnknown; |
| } |
| return SpvImageFormatUnknown; |
| } |
| |
| bool Builder::push_function_inst(spv::Op op, const OperandList& operands) { |
| if (functions_.empty()) { |
| utils::StringStream ss; |
| ss << "Internal error: trying to add SPIR-V instruction " << int(op) |
| << " outside a function"; |
| error_ = ss.str(); |
| return false; |
| } |
| functions_.back().push_inst(op, operands); |
| return true; |
| } |
| |
| bool Builder::InsideBasicBlock() const { |
| if (functions_.empty()) { |
| return false; |
| } |
| const auto& instructions = functions_.back().instructions(); |
| if (instructions.empty()) { |
| // The Function object does not explicitly represent its entry block |
| // label. So return *true* because an empty list means the only |
| // thing in the function is that entry block label. |
| return true; |
| } |
| const auto& inst = instructions.back(); |
| switch (inst.opcode()) { |
| case spv::Op::OpBranch: |
| case spv::Op::OpBranchConditional: |
| case spv::Op::OpSwitch: |
| case spv::Op::OpReturn: |
| case spv::Op::OpReturnValue: |
| case spv::Op::OpUnreachable: |
| case spv::Op::OpKill: |
| case spv::Op::OpTerminateInvocation: |
| return false; |
| default: |
| break; |
| } |
| return true; |
| } |
| |
| Builder::ContinuingInfo::ContinuingInfo(const ast::Statement* the_last_statement, |
| uint32_t loop_id, |
| uint32_t break_id) |
| : last_statement(the_last_statement), loop_header_id(loop_id), break_target_id(break_id) { |
| TINT_ASSERT(Writer, last_statement != nullptr); |
| TINT_ASSERT(Writer, loop_header_id != 0u); |
| TINT_ASSERT(Writer, break_target_id != 0u); |
| } |
| |
| Builder::Backedge::Backedge(spv::Op the_opcode, OperandList the_operands) |
| : opcode(the_opcode), operands(the_operands) {} |
| |
| Builder::Backedge::Backedge(const Builder::Backedge& other) = default; |
| Builder::Backedge& Builder::Backedge::operator=(const Builder::Backedge& other) = default; |
| Builder::Backedge::~Backedge() = default; |
| |
| Builder::Scope::Scope() = default; |
| Builder::Scope::Scope(const Scope&) = default; |
| Builder::Scope::~Scope() = default; |
| |
| } // namespace tint::writer::spirv |