blob: b16d67fb614a6160ecb337005250c5102edcb9d4 [file] [log] [blame] [edit]
// Copyright 2017 The Dawn Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "dawn/tests/DawnTest.h"
#include "dawn/common/Assert.h"
#include "dawn/utils/ComboRenderPipelineDescriptor.h"
#include "dawn/utils/WGPUHelpers.h"
namespace dawn {
namespace {
constexpr uint32_t kRTSize = 400;
class IndexFormatTest : public DawnTest {
protected:
void SetUp() override {
DawnTest::SetUp();
renderPass = utils::CreateBasicRenderPass(device, kRTSize, kRTSize);
}
utils::BasicRenderPass renderPass;
wgpu::RenderPipeline MakeTestPipeline(
wgpu::IndexFormat format,
wgpu::PrimitiveTopology primitiveTopology = wgpu::PrimitiveTopology::TriangleStrip) {
wgpu::ShaderModule vsModule = utils::CreateShaderModule(device, R"(
struct VertexIn {
@location(0) pos : vec4f,
@builtin(vertex_index) idx : u32,
}
@vertex fn main(input : VertexIn) -> @builtin(position) vec4f {
// 0xFFFFFFFE is a designated invalid index used by some tests.
if (input.idx == 0xFFFFFFFEu) {
return vec4f(0.0, 0.0, 0.0, 1.0);
}
return input.pos;
})");
wgpu::ShaderModule fsModule = utils::CreateShaderModule(device, R"(
@fragment fn main() -> @location(0) vec4f {
return vec4f(0.0, 1.0, 0.0, 1.0);
})");
utils::ComboRenderPipelineDescriptor descriptor;
descriptor.vertex.module = vsModule;
descriptor.cFragment.module = fsModule;
descriptor.primitive.topology = primitiveTopology;
descriptor.primitive.stripIndexFormat = format;
descriptor.vertex.bufferCount = 1;
descriptor.cBuffers[0].arrayStride = 4 * sizeof(float);
descriptor.cBuffers[0].attributeCount = 1;
descriptor.cAttributes[0].format = wgpu::VertexFormat::Float32x4;
descriptor.cTargets[0].format = renderPass.colorFormat;
return device.CreateRenderPipeline(&descriptor);
}
};
// Test that the Uint32 index format is correctly interpreted
TEST_P(IndexFormatTest, Uint32) {
wgpu::RenderPipeline pipeline = MakeTestPipeline(wgpu::IndexFormat::Uint32);
wgpu::Buffer vertexBuffer = utils::CreateBufferFromData<float>(
device, wgpu::BufferUsage::Vertex,
{-1.0f, -1.0f, 0.0f, 1.0f, // Note Vertices[0] = Vertices[1]
-1.0f, -1.0f, 0.0f, 1.0f, 1.0f, -1.0f, 0.0f, 1.0f, -1.0f, 1.0f, 0.0f, 1.0f});
// If this is interpreted as Uint16, then it would be 0, 1, 0, ... and would draw nothing.
wgpu::Buffer indexBuffer =
utils::CreateBufferFromData<uint32_t>(device, wgpu::BufferUsage::Index, {1, 2, 3});
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
{
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo);
pass.SetPipeline(pipeline);
pass.SetVertexBuffer(0, vertexBuffer);
pass.SetIndexBuffer(indexBuffer, wgpu::IndexFormat::Uint32);
pass.DrawIndexed(3);
pass.End();
}
wgpu::CommandBuffer commands = encoder.Finish();
queue.Submit(1, &commands);
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kGreen, renderPass.color, 100, 300);
}
// Test that the Uint16 index format is correctly interpreted
TEST_P(IndexFormatTest, Uint16) {
wgpu::RenderPipeline pipeline = MakeTestPipeline(wgpu::IndexFormat::Uint16);
wgpu::Buffer vertexBuffer = utils::CreateBufferFromData<float>(
device, wgpu::BufferUsage::Vertex,
{-1.0f, -1.0f, 0.0f, 1.0f, 1.0f, -1.0f, 0.0f, 1.0f, -1.0f, 1.0f, 0.0f, 1.0f});
// If this is interpreted as uint32, it will have index 1 and 2 be both 0 and render nothing
wgpu::Buffer indexBuffer =
utils::CreateBufferFromData<uint16_t>(device, wgpu::BufferUsage::Index, {1, 2, 0, 0, 0, 0});
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
{
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo);
pass.SetPipeline(pipeline);
pass.SetVertexBuffer(0, vertexBuffer);
pass.SetIndexBuffer(indexBuffer, wgpu::IndexFormat::Uint16);
pass.DrawIndexed(3);
pass.End();
}
wgpu::CommandBuffer commands = encoder.Finish();
queue.Submit(1, &commands);
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kGreen, renderPass.color, 100, 300);
}
// Test that the index format used is the format of the last set pipeline. This is to
// prevent a case in D3D12 where the index format would be captured from the last
// pipeline on SetIndexBuffer.
TEST_P(IndexFormatTest, ChangePipelineAfterSetIndexBuffer) {
wgpu::RenderPipeline pipeline32 = MakeTestPipeline(wgpu::IndexFormat::Uint32);
wgpu::RenderPipeline pipeline16 = MakeTestPipeline(wgpu::IndexFormat::Uint16);
wgpu::Buffer vertexBuffer = utils::CreateBufferFromData<float>(
device, wgpu::BufferUsage::Vertex,
{-1.0f, -1.0f, 0.0f, 1.0f, // Note Vertices[0] = Vertices[1]
-1.0f, -1.0f, 0.0f, 1.0f, 1.0f, -1.0f, 0.0f, 1.0f, -1.0f, 1.0f, 0.0f, 1.0f});
// If this is interpreted as Uint16, then it would be 0, 1, 0, ... and would draw nothing.
wgpu::Buffer indexBuffer =
utils::CreateBufferFromData<uint32_t>(device, wgpu::BufferUsage::Index, {1, 2, 3});
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
{
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo);
pass.SetPipeline(pipeline16);
pass.SetVertexBuffer(0, vertexBuffer);
pass.SetIndexBuffer(indexBuffer, wgpu::IndexFormat::Uint32);
pass.SetPipeline(pipeline32);
pass.DrawIndexed(3);
pass.End();
}
wgpu::CommandBuffer commands = encoder.Finish();
queue.Submit(1, &commands);
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kGreen, renderPass.color, 100, 300);
}
// Test that setting the index buffer before the pipeline works, this is important
// for backends where the index format is passed inside the call to SetIndexBuffer
// because it needs to be done lazily (to query the format from the last pipeline).
TEST_P(IndexFormatTest, SetIndexBufferBeforeSetPipeline) {
wgpu::RenderPipeline pipeline = MakeTestPipeline(wgpu::IndexFormat::Uint32);
wgpu::Buffer vertexBuffer = utils::CreateBufferFromData<float>(
device, wgpu::BufferUsage::Vertex,
{-1.0f, -1.0f, 0.0f, 1.0f, 1.0f, -1.0f, 0.0f, 1.0f, -1.0f, 1.0f, 0.0f, 1.0f});
wgpu::Buffer indexBuffer =
utils::CreateBufferFromData<uint32_t>(device, wgpu::BufferUsage::Index, {0, 1, 2});
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
{
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo);
pass.SetIndexBuffer(indexBuffer, wgpu::IndexFormat::Uint32);
pass.SetPipeline(pipeline);
pass.SetVertexBuffer(0, vertexBuffer);
pass.DrawIndexed(3);
pass.End();
}
wgpu::CommandBuffer commands = encoder.Finish();
queue.Submit(1, &commands);
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8(0, 255, 0, 255), renderPass.color, 100, 300);
}
// Test that index buffers of multiple formats can be used with a pipeline that
// doesn't use strip primitive topology.
TEST_P(IndexFormatTest, SetIndexBufferDifferentFormats) {
wgpu::RenderPipeline pipeline =
MakeTestPipeline(wgpu::IndexFormat::Undefined, wgpu::PrimitiveTopology::TriangleList);
wgpu::Buffer vertexBuffer = utils::CreateBufferFromData<float>(
device, wgpu::BufferUsage::Vertex,
{-1.0f, -1.0f, 0.0f, 1.0f, 1.0f, -1.0f, 0.0f, 1.0f, -1.0f, 1.0f, 0.0f, 1.0f});
wgpu::Buffer indexBuffer32 =
utils::CreateBufferFromData<uint32_t>(device, wgpu::BufferUsage::Index, {0, 1, 2});
wgpu::Buffer indexBuffer16 =
utils::CreateBufferFromData<uint16_t>(device, wgpu::BufferUsage::Index, {0, 1, 2, 0});
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
{
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo);
pass.SetIndexBuffer(indexBuffer32, wgpu::IndexFormat::Uint32);
pass.SetPipeline(pipeline);
pass.SetVertexBuffer(0, vertexBuffer);
pass.DrawIndexed(3);
pass.End();
}
wgpu::CommandBuffer commands = encoder.Finish();
queue.Submit(1, &commands);
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8(0, 255, 0, 255), renderPass.color, 100, 300);
encoder = device.CreateCommandEncoder();
{
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo);
pass.SetIndexBuffer(indexBuffer16, wgpu::IndexFormat::Uint16);
pass.SetPipeline(pipeline);
pass.SetVertexBuffer(0, vertexBuffer);
pass.DrawIndexed(3);
pass.End();
}
commands = encoder.Finish();
queue.Submit(1, &commands);
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8(0, 255, 0, 255), renderPass.color, 100, 300);
}
// Tests for primitive restart use vertices like in the drawing and draw the following
// indices: 0 1 2 PRIM_RESTART 3 4 5. Then A and B should be written but not C.
// |--------------|
// | 0---1 |
// | \ B| |
// | \| |
// | 3 C 2 |
// | |\ |
// | |A \ |
// | 4---5 |
// |--------------|
class TriangleStripPrimitiveRestartTests : public IndexFormatTest {
protected:
wgpu::Buffer mVertexBuffer;
void SetUp() override {
IndexFormatTest::SetUp();
mVertexBuffer = utils::CreateBufferFromData<float>(device, wgpu::BufferUsage::Vertex,
{
0.0f, 1.0f, 0.0f, 1.0f, // 0
1.0f, 1.0f, 0.0f, 1.0f, // 1
1.0f, 0.0f, 0.0f, 1.0f, // 2
-1.0f, 0.0f, 0.0f, 1.0f, // 3
-1.0f, -1.0f, 0.0f, 1.0f, // 4
0.0f, -1.0f, 0.0f, 1.0f, // 5
});
}
};
// Test use of primitive restart with an Uint32 index format
TEST_P(TriangleStripPrimitiveRestartTests, Uint32PrimitiveRestart) {
wgpu::RenderPipeline pipeline = MakeTestPipeline(wgpu::IndexFormat::Uint32);
wgpu::Buffer indexBuffer =
utils::CreateBufferFromData<uint32_t>(device, wgpu::BufferUsage::Index,
{
0,
1,
2,
0xFFFFFFFFu,
3,
4,
5,
});
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
{
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo);
pass.SetPipeline(pipeline);
pass.SetVertexBuffer(0, mVertexBuffer);
pass.SetIndexBuffer(indexBuffer, wgpu::IndexFormat::Uint32);
pass.DrawIndexed(7);
pass.End();
}
wgpu::CommandBuffer commands = encoder.Finish();
queue.Submit(1, &commands);
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kGreen, renderPass.color, 50, 350); // A
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kGreen, renderPass.color, 350, 50); // B
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kZero, renderPass.color, 198, 200); // C
}
// Same as the above test, but uses an OOB index to emulate primitive restart being disabled,
// causing point C to be written to.
TEST_P(TriangleStripPrimitiveRestartTests, Uint32WithoutPrimitiveRestart) {
wgpu::RenderPipeline pipeline = MakeTestPipeline(wgpu::IndexFormat::Uint32);
wgpu::Buffer indexBuffer =
utils::CreateBufferFromData<uint32_t>(device, wgpu::BufferUsage::Index,
{
0,
1,
2,
// Not a valid index.
0xFFFFFFFEu,
3,
4,
5,
});
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
{
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo);
pass.SetPipeline(pipeline);
pass.SetVertexBuffer(0, mVertexBuffer);
pass.SetIndexBuffer(indexBuffer, wgpu::IndexFormat::Uint32);
pass.DrawIndexed(7);
pass.End();
}
wgpu::CommandBuffer commands = encoder.Finish();
queue.Submit(1, &commands);
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kGreen, renderPass.color, 50, 350); // A
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kGreen, renderPass.color, 350, 50); // B
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kGreen, renderPass.color, 198, 200); // C
}
// Test use of primitive restart with an Uint16 index format
TEST_P(TriangleStripPrimitiveRestartTests, Uint16PrimitiveRestart) {
wgpu::RenderPipeline pipeline = MakeTestPipeline(wgpu::IndexFormat::Uint16);
wgpu::Buffer indexBuffer =
utils::CreateBufferFromData<uint16_t>(device, wgpu::BufferUsage::Index,
{
0,
1,
2,
0xFFFFu,
3,
4,
5,
// This value is for padding.
0xFFFFu,
});
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
{
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo);
pass.SetPipeline(pipeline);
pass.SetVertexBuffer(0, mVertexBuffer);
pass.SetIndexBuffer(indexBuffer, wgpu::IndexFormat::Uint16);
pass.DrawIndexed(7);
pass.End();
}
wgpu::CommandBuffer commands = encoder.Finish();
queue.Submit(1, &commands);
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kGreen, renderPass.color, 50, 350); // A
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kGreen, renderPass.color, 350, 50); // B
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kZero, renderPass.color, 198, 200); // C
}
// Tests for primitive restart use vertices like in the drawing and draw the following
// indices: 0 1 PRIM_RESTART 2 3. Then 1 and 2 should be written but not A.
// |--------------|
// | 3 0|
// | | ||
// | | ||
// | 2 A 1|
// | |
// | |
// | |
// |--------------|
class LineStripPrimitiveRestartTests : public IndexFormatTest {
protected:
protected:
wgpu::Buffer mVertexBuffer;
void SetUp() override {
IndexFormatTest::SetUp();
mVertexBuffer = utils::CreateBufferFromData<float>(device, wgpu::BufferUsage::Vertex,
{
1.0f, 1.0f, 0.0f, 1.0f, // 0
1.0f, 0.0f, 0.0f, 1.0f, // 1
0.0f, 0.0f, 0.0f, 1.0f, // 2
0.0f, 1.0f, 0.0f, 1.0f // 3
});
}
};
TEST_P(LineStripPrimitiveRestartTests, Uint32PrimitiveRestart) {
wgpu::RenderPipeline pipeline =
MakeTestPipeline(wgpu::IndexFormat::Uint32, wgpu::PrimitiveTopology::LineStrip);
wgpu::Buffer indexBuffer = utils::CreateBufferFromData<uint32_t>(
device, wgpu::BufferUsage::Index, {0, 1, 0xFFFFFFFFu, 2, 3});
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
{
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo);
pass.SetPipeline(pipeline);
pass.SetVertexBuffer(0, mVertexBuffer);
pass.SetIndexBuffer(indexBuffer, wgpu::IndexFormat::Uint32);
pass.DrawIndexed(5);
pass.End();
}
wgpu::CommandBuffer commands = encoder.Finish();
queue.Submit(1, &commands);
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kGreen, renderPass.color, 399, 199); // 1
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kGreen, renderPass.color, 199, 199); // 2
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kZero, renderPass.color, 300, 199); // A
}
// Same as the above test, but uses an OOB index to emulate primitive restart being disabled,
// causing point A to be written to.
TEST_P(LineStripPrimitiveRestartTests, Uint32WithoutPrimitiveRestart) {
wgpu::RenderPipeline pipeline =
MakeTestPipeline(wgpu::IndexFormat::Uint32, wgpu::PrimitiveTopology::LineStrip);
wgpu::Buffer indexBuffer =
utils::CreateBufferFromData<uint32_t>(device, wgpu::BufferUsage::Index,
{0, 1, // Not a valid index
0xFFFFFFFEu, 2, 3});
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
{
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo);
pass.SetPipeline(pipeline);
pass.SetVertexBuffer(0, mVertexBuffer);
pass.SetIndexBuffer(indexBuffer, wgpu::IndexFormat::Uint32);
pass.DrawIndexed(5);
pass.End();
}
wgpu::CommandBuffer commands = encoder.Finish();
queue.Submit(1, &commands);
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kGreen, renderPass.color, 399, 199); // 1
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kGreen, renderPass.color, 199, 199); // 2
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kGreen, renderPass.color, 300, 199); // A
}
TEST_P(LineStripPrimitiveRestartTests, Uint16PrimitiveRestart) {
wgpu::RenderPipeline pipeline =
MakeTestPipeline(wgpu::IndexFormat::Uint16, wgpu::PrimitiveTopology::LineStrip);
wgpu::Buffer indexBuffer =
utils::CreateBufferFromData<uint16_t>(device, wgpu::BufferUsage::Index,
{0, 1, 0xFFFFu, 2, 3, // This value is for padding.
0xFFFFu});
wgpu::CommandEncoder encoder = device.CreateCommandEncoder();
{
wgpu::RenderPassEncoder pass = encoder.BeginRenderPass(&renderPass.renderPassInfo);
pass.SetPipeline(pipeline);
pass.SetVertexBuffer(0, mVertexBuffer);
pass.SetIndexBuffer(indexBuffer, wgpu::IndexFormat::Uint16);
pass.DrawIndexed(5);
pass.End();
}
wgpu::CommandBuffer commands = encoder.Finish();
queue.Submit(1, &commands);
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kGreen, renderPass.color, 399, 199); // 1
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kGreen, renderPass.color, 199, 199); // 2
EXPECT_PIXEL_RGBA8_EQ(utils::RGBA8::kZero, renderPass.color, 300, 199); // A
}
DAWN_INSTANTIATE_TEST(IndexFormatTest,
D3D11Backend(),
D3D12Backend(),
MetalBackend(),
OpenGLBackend(),
OpenGLESBackend(),
VulkanBackend());
DAWN_INSTANTIATE_TEST(TriangleStripPrimitiveRestartTests,
D3D11Backend(),
D3D12Backend(),
MetalBackend(),
OpenGLBackend(),
OpenGLESBackend(),
VulkanBackend());
DAWN_INSTANTIATE_TEST(LineStripPrimitiveRestartTests,
D3D11Backend(),
D3D12Backend(),
MetalBackend(),
OpenGLBackend(),
OpenGLESBackend(),
VulkanBackend());
} // anonymous namespace
} // namespace dawn