| // Copyright 2019 The Dawn Authors | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // http://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| #include <memory> | |
| #include "dawn/tests/MockCallback.h" | |
| #include "dawn/tests/unittests/validation/ValidationTest.h" | |
| #include "gmock/gmock.h" | |
| using testing::_; | |
| using testing::MockCallback; | |
| using testing::Sequence; | |
| class MockDevicePopErrorScopeCallback { | |
| public: | |
| MOCK_METHOD(void, Call, (WGPUErrorType type, const char* message, void* userdata)); | |
| }; | |
| static std::unique_ptr<MockDevicePopErrorScopeCallback> mockDevicePopErrorScopeCallback; | |
| static void ToMockDevicePopErrorScopeCallback(WGPUErrorType type, | |
| const char* message, | |
| void* userdata) { | |
| mockDevicePopErrorScopeCallback->Call(type, message, userdata); | |
| } | |
| class MockQueueWorkDoneCallback { | |
| public: | |
| MOCK_METHOD(void, Call, (WGPUQueueWorkDoneStatus status, void* userdata)); | |
| }; | |
| static std::unique_ptr<MockQueueWorkDoneCallback> mockQueueWorkDoneCallback; | |
| static void ToMockQueueWorkDone(WGPUQueueWorkDoneStatus status, void* userdata) { | |
| mockQueueWorkDoneCallback->Call(status, userdata); | |
| } | |
| class ErrorScopeValidationTest : public ValidationTest { | |
| protected: | |
| void FlushWireAndTick() { | |
| FlushWire(); | |
| device.Tick(); | |
| } | |
| private: | |
| void SetUp() override { | |
| ValidationTest::SetUp(); | |
| mockDevicePopErrorScopeCallback = std::make_unique<MockDevicePopErrorScopeCallback>(); | |
| mockQueueWorkDoneCallback = std::make_unique<MockQueueWorkDoneCallback>(); | |
| } | |
| void TearDown() override { | |
| ValidationTest::TearDown(); | |
| // Delete mocks so that expectations are checked | |
| mockDevicePopErrorScopeCallback = nullptr; | |
| mockQueueWorkDoneCallback = nullptr; | |
| } | |
| }; | |
| // Test the simple success case. | |
| TEST_F(ErrorScopeValidationTest, Success) { | |
| device.PushErrorScope(wgpu::ErrorFilter::Validation); | |
| EXPECT_CALL(*mockDevicePopErrorScopeCallback, Call(WGPUErrorType_NoError, _, this)).Times(1); | |
| device.PopErrorScope(ToMockDevicePopErrorScopeCallback, this); | |
| FlushWireAndTick(); | |
| } | |
| // Test the simple case where the error scope catches an error. | |
| TEST_F(ErrorScopeValidationTest, CatchesError) { | |
| device.PushErrorScope(wgpu::ErrorFilter::Validation); | |
| wgpu::BufferDescriptor desc = {}; | |
| desc.usage = static_cast<wgpu::BufferUsage>(WGPUBufferUsage_Force32); | |
| device.CreateBuffer(&desc); | |
| EXPECT_CALL(*mockDevicePopErrorScopeCallback, Call(WGPUErrorType_Validation, _, this)).Times(1); | |
| device.PopErrorScope(ToMockDevicePopErrorScopeCallback, this); | |
| FlushWireAndTick(); | |
| } | |
| // Test that errors bubble to the parent scope if not handled by the current scope. | |
| TEST_F(ErrorScopeValidationTest, ErrorBubbles) { | |
| device.PushErrorScope(wgpu::ErrorFilter::Validation); | |
| device.PushErrorScope(wgpu::ErrorFilter::OutOfMemory); | |
| wgpu::BufferDescriptor desc = {}; | |
| desc.usage = static_cast<wgpu::BufferUsage>(WGPUBufferUsage_Force32); | |
| device.CreateBuffer(&desc); | |
| // OutOfMemory does not match Validation error. | |
| EXPECT_CALL(*mockDevicePopErrorScopeCallback, Call(WGPUErrorType_NoError, _, this)).Times(1); | |
| device.PopErrorScope(ToMockDevicePopErrorScopeCallback, this); | |
| FlushWireAndTick(); | |
| // Parent validation error scope captures the error. | |
| EXPECT_CALL(*mockDevicePopErrorScopeCallback, Call(WGPUErrorType_Validation, _, this + 1)) | |
| .Times(1); | |
| device.PopErrorScope(ToMockDevicePopErrorScopeCallback, this + 1); | |
| FlushWireAndTick(); | |
| } | |
| // Test that if an error scope matches an error, it does not bubble to the parent scope. | |
| TEST_F(ErrorScopeValidationTest, HandledErrorsStopBubbling) { | |
| device.PushErrorScope(wgpu::ErrorFilter::OutOfMemory); | |
| device.PushErrorScope(wgpu::ErrorFilter::Validation); | |
| wgpu::BufferDescriptor desc = {}; | |
| desc.usage = static_cast<wgpu::BufferUsage>(WGPUBufferUsage_Force32); | |
| device.CreateBuffer(&desc); | |
| // Inner scope catches the error. | |
| EXPECT_CALL(*mockDevicePopErrorScopeCallback, Call(WGPUErrorType_Validation, _, this)).Times(1); | |
| device.PopErrorScope(ToMockDevicePopErrorScopeCallback, this); | |
| FlushWireAndTick(); | |
| // Parent scope does not see the error. | |
| EXPECT_CALL(*mockDevicePopErrorScopeCallback, Call(WGPUErrorType_NoError, _, this + 1)) | |
| .Times(1); | |
| device.PopErrorScope(ToMockDevicePopErrorScopeCallback, this + 1); | |
| FlushWireAndTick(); | |
| } | |
| // Test that if no error scope handles an error, it goes to the device UncapturedError callback | |
| TEST_F(ErrorScopeValidationTest, UnhandledErrorsMatchUncapturedErrorCallback) { | |
| device.PushErrorScope(wgpu::ErrorFilter::OutOfMemory); | |
| wgpu::BufferDescriptor desc = {}; | |
| desc.usage = static_cast<wgpu::BufferUsage>(WGPUBufferUsage_Force32); | |
| ASSERT_DEVICE_ERROR(device.CreateBuffer(&desc)); | |
| EXPECT_CALL(*mockDevicePopErrorScopeCallback, Call(WGPUErrorType_NoError, _, this)).Times(1); | |
| device.PopErrorScope(ToMockDevicePopErrorScopeCallback, this); | |
| FlushWireAndTick(); | |
| } | |
| // Check that push/popping error scopes must be balanced. | |
| TEST_F(ErrorScopeValidationTest, PushPopBalanced) { | |
| // No error scopes to pop. | |
| { | |
| EXPECT_CALL(*mockDevicePopErrorScopeCallback, Call(WGPUErrorType_Unknown, _, this)) | |
| .Times(1); | |
| device.PopErrorScope(ToMockDevicePopErrorScopeCallback, this); | |
| FlushWireAndTick(); | |
| } | |
| // Too many pops | |
| { | |
| device.PushErrorScope(wgpu::ErrorFilter::Validation); | |
| EXPECT_CALL(*mockDevicePopErrorScopeCallback, Call(WGPUErrorType_NoError, _, this + 1)) | |
| .Times(1); | |
| device.PopErrorScope(ToMockDevicePopErrorScopeCallback, this + 1); | |
| FlushWireAndTick(); | |
| EXPECT_CALL(*mockDevicePopErrorScopeCallback, Call(WGPUErrorType_Unknown, _, this + 2)) | |
| .Times(1); | |
| device.PopErrorScope(ToMockDevicePopErrorScopeCallback, this + 2); | |
| FlushWireAndTick(); | |
| } | |
| } | |
| // Test that parent error scopes also call their callbacks before an enclosed Queue::Submit | |
| // completes | |
| TEST_F(ErrorScopeValidationTest, EnclosedQueueSubmitNested) { | |
| wgpu::Queue queue = device.GetQueue(); | |
| device.PushErrorScope(wgpu::ErrorFilter::OutOfMemory); | |
| device.PushErrorScope(wgpu::ErrorFilter::OutOfMemory); | |
| queue.Submit(0, nullptr); | |
| queue.OnSubmittedWorkDone(0u, ToMockQueueWorkDone, this); | |
| Sequence seq; | |
| MockCallback<WGPUErrorCallback> errorScopeCallback2; | |
| EXPECT_CALL(errorScopeCallback2, Call(WGPUErrorType_NoError, _, this + 1)).InSequence(seq); | |
| device.PopErrorScope(errorScopeCallback2.Callback(), | |
| errorScopeCallback2.MakeUserdata(this + 1)); | |
| MockCallback<WGPUErrorCallback> errorScopeCallback1; | |
| EXPECT_CALL(errorScopeCallback1, Call(WGPUErrorType_NoError, _, this + 2)).InSequence(seq); | |
| device.PopErrorScope(errorScopeCallback1.Callback(), | |
| errorScopeCallback1.MakeUserdata(this + 2)); | |
| EXPECT_CALL(*mockQueueWorkDoneCallback, Call(WGPUQueueWorkDoneStatus_Success, this)) | |
| .InSequence(seq); | |
| WaitForAllOperations(device); | |
| } | |
| // Test that if the device is destroyed before the callback occurs, it is called with NoError | |
| // in dawn_native, but Unknown in dawn_wire because the device is destroyed before the callback | |
| // message happens. | |
| TEST_F(ErrorScopeValidationTest, DeviceDestroyedBeforeCallback) { | |
| device.PushErrorScope(wgpu::ErrorFilter::OutOfMemory); | |
| { | |
| // Note: this is in its own scope to be clear the queue does not outlive the device. | |
| wgpu::Queue queue = device.GetQueue(); | |
| queue.Submit(0, nullptr); | |
| } | |
| if (UsesWire()) { | |
| device.PopErrorScope(ToMockDevicePopErrorScopeCallback, this); | |
| EXPECT_CALL(*mockDevicePopErrorScopeCallback, Call(WGPUErrorType_Unknown, _, this)) | |
| .Times(1); | |
| ExpectDeviceDestruction(); | |
| device = nullptr; | |
| } else { | |
| EXPECT_CALL(*mockDevicePopErrorScopeCallback, Call(WGPUErrorType_NoError, _, this)) | |
| .Times(1); | |
| device.PopErrorScope(ToMockDevicePopErrorScopeCallback, this); | |
| ExpectDeviceDestruction(); | |
| device = nullptr; | |
| } | |
| } | |
| // If the device is destroyed, pop error scope should callback with device lost. | |
| TEST_F(ErrorScopeValidationTest, DeviceDestroyedBeforePop) { | |
| device.PushErrorScope(wgpu::ErrorFilter::Validation); | |
| ExpectDeviceDestruction(); | |
| device.Destroy(); | |
| FlushWireAndTick(); | |
| EXPECT_CALL(*mockDevicePopErrorScopeCallback, Call(WGPUErrorType_DeviceLost, _, this)).Times(1); | |
| device.PopErrorScope(ToMockDevicePopErrorScopeCallback, this); | |
| FlushWireAndTick(); | |
| } | |
| // Regression test that on device shutdown, we don't get a recursion in O(pushed error scope) that | |
| // would lead to a stack overflow | |
| TEST_F(ErrorScopeValidationTest, ShutdownStackOverflow) { | |
| for (size_t i = 0; i < 1'000'000; i++) { | |
| device.PushErrorScope(wgpu::ErrorFilter::Validation); | |
| } | |
| } |