infra/kokoro/windows/build.bat - dawn - Git at Google

 @rem Copyright 2021 The Dawn & Tint Authors
 @rem
 @rem Redistribution and use in source and binary forms, with or without
 @rem modification, are permitted provided that the following conditions are met:
 @rem
 @rem 1. Redistributions of source code must retain the above copyright notice, this
 @rem    list of conditions and the following disclaimer.
 @rem
 @rem 2. Redistributions in binary form must reproduce the above copyright notice,
 @rem    this list of conditions and the following disclaimer in the documentation
 @rem    and/or other materials provided with the distribution.
 @rem
 @rem 3. Neither the name of the copyright holder nor the names of its
 @rem    contributors may be used to endorse or promote products derived from
 @rem    this software without specific prior written permission.
 @rem
 @rem THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 @rem AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 @rem IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 @rem DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 @rem FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 @rem DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 @rem SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 @rem CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 @rem OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 @rem OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 @echo off
 SETLOCAL ENABLEDELAYEDEXPANSION

 goto :main

 :task_begin
 set TASK_NAME=%~1
 echo %TASK_NAME% starting at %Time%
 exit /b 0

 :print_last_task_duration
 if not "%TASK_NAME%" == "" (
     echo %TASK_NAME% completed at %Time%
 )
 exit /b 0

 :status
 echo.
 echo.
 call :print_last_task_duration
 echo.
 echo *****************************************************************
 echo %~1
 echo *****************************************************************
 echo.
 call :task_begin "%~1"
 exit /b 0

 :main

 set ORIGINAL_SRC_DIR= %~dp0\..\..\..
 set TEMP_DIR=%TEMP%\dawn-temp
 set SRC_DIR=%TEMP_DIR%\dawn-src
 set BUILD_DIR=%TEMP_DIR%\dawn-build

 cd /d %ORIGINAL_SRC_DIR%
 if not exist ".git\" (
     echo "ORIGINAL_SRC_DIR should point to project root: %ORIGINAL_SRC_DIR%"
     goto :error
 )

 if exist %TEMP_DIR% (
     call :status "Deleting %TEMP_DIR%"
     del /q/f/s %TEMP_DIR% > NUL || goto :error
     rmdir /q/s %TEMP_DIR% > NUL || goto :error
 )
 mkdir %TEMP_DIR% || goto :error

 call :status "Fetching and installing DXC"
 @echo on
 set DXC_RELEASE="https://github.com/microsoft/DirectXShaderCompiler/releases/download/v1.7.2207/dxc_2022_07_18.zip"
 curl -k -L %DXC_RELEASE% --output "%TEMP_DIR%\dxc_release.zip" || goto :error
 powershell.exe -Command "Expand-Archive -LiteralPath '%TEMP_DIR%\dxc_release.zip' -DestinationPath '%TEMP_DIR%\dxc'" || goto :error
 set DXC_PATH=%TEMP_DIR%\dxc\bin\x64

 call :status "Fetching and installing Windows SDK for d3dcompiler DLL"
 @echo on
 set WINSDK_DLL_INSTALLER=https://go.microsoft.com/fwlink/?linkid=2164145
 set WINSDK_VERSION=10.0.20348.0
 curl -k -L %WINSDK_DLL_INSTALLER% --output "%TEMP_DIR%\winsdksetup.exe" || goto :error
 start "download" /wait "%TEMP_DIR%\winsdksetup.exe" /quiet /norestart /ceip off /features OptionId.DesktopCPPx64 /layout "%TEMP_DIR%\winsdkinstall" || goto :error
 start "install" /wait "%TEMP_DIR%\winsdkinstall\Installers\Windows SDK for Windows Store Apps Tools-x86_en-us.msi" || goto :error
 set D3DCOMPILER_PATH=C:\Program Files (x86)\Windows Kits\10\bin\%WINSDK_VERSION%\x64
 @echo off

 call :status "Installing depot_tools"
 @echo on
 pushd %TEMP_DIR%
 rem For Windows, we must download and extract a bundle.
 rem See https://chromium.googlesource.com/chromium/src/+/HEAD/docs/windows_build_instructions.md#install
 powershell -Command "(New-Object Net.WebClient).DownloadFile('https://storage.googleapis.com/chrome-infra/depot_tools.zip', 'depot_tools.zip')" || goto :error
 powershell -Command "Expand-Archive -Force 'depot_tools.zip' 'depot_tools'" || goto :error
 rem Run gclient once to install deps
 set PATH=%TEMP_DIR%\depot_tools;%PATH%
 set DEPOT_TOOLS_UPDATE=1
 set DEPOT_TOOLS_WIN_TOOLCHAIN=0
 call gclient || goto :error
 @echo off
 popd

 call :status "Cloning to clean source directory"
 @echo on
 mkdir %SRC_DIR% || goto :error
 cd /d %SRC_DIR% || goto :error
 call git clone %ORIGINAL_SRC_DIR% . || goto :error
 @echo off

 call :status "Fetching dependencies"
 @echo on
 copy scripts\standalone.gclient .gclient || goto :error
 call gclient sync || goto :error
 @echo off

 call :status "Adding the Ninja from DEPS to the PATH"
 @echo on
 set PATH=%SRC_DIR%\third_party\ninja;%PATH%
 @echo off

 call :status "Configuring build system"
 @echo on
 mkdir %BUILD_DIR%
 cd /d %BUILD_DIR%
 set COMMON_CMAKE_FLAGS=             ^
     -DTINT_BUILD_DOCS=O             ^
     -DTINT_BUILD_BENCHMARKS=1       ^
     -DCMAKE_BUILD_TYPE=%BUILD_TYPE% ^
     -DTINT_BUILD_BENCHMARKS=1       ^
     -DTINT_BUILD_SPV_READER=1       ^
     -DTINT_BUILD_WGSL_READER=1      ^
     -DTINT_BUILD_GLSL_WRITER=1      ^
     -DTINT_BUILD_HLSL_WRITER=1      ^
     -DTINT_BUILD_MSL_WRITER=1       ^
     -DTINT_BUILD_SPV_WRITER=1       ^
     -DTINT_BUILD_WGSL_WRITER=1      ^
     -DTINT_RANDOMIZE_HASHES=1

 @echo off

 call :status "Building dawn"
 @echo on
 rem Disable msbuild "Intermediate or Output directory cannot reside in Temporary directory"
 set IgnoreWarnIntDirInTempDetected=true
 rem Add Python3 to path as this Kokoro image only has Python2 in it
 set PATH=C:\Python37;%PATH%
 rem To use ninja with CMake requires VC env vars
 call "C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Auxiliary\Build\vcvars64.bat"
 @echo on
 rem Note that we need to specify the C and C++ compiler only because Cygwin is in PATH and CMake finds GCC and picks that over MSVC
 cmake %SRC_DIR% -G "Ninja" -DCMAKE_C_COMPILER="cl.exe" -DCMAKE_CXX_COMPILER="cl.exe" %COMMON_CMAKE_FLAGS% || goto :error
 cmake --build . || goto :error
 call "C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Auxiliary\Build\vcvars64.bat" /clean_env
 @echo off

 call :status "Running tint_unittests"
 @echo on
 tint_unittests.exe || goto :error
 @echo off

 call :status "Testing test/tint/test-all.sh"
 @echo on
 cd /d %SRC_DIR% || goto :error
 rem Run tests with DXC, FXC and Metal validation
 set OLD_PATH=%PATH%
 set PATH=C:\Program Files\Metal Developer Tools\macos\bin;%PATH%
 if "%BUILD_TYPE%" == "Debug" (
     rem TODO(crbug.com/2034): Add back glsl once we fix the ~7x slowdown in Windows Debug builds
     set TEST_ALL_FORMATS=wgsl,spvasm,msl,hlsl
 ) else (
     set TEST_ALL_FORMATS=wgsl,spvasm,msl,hlsl,glsl
 )
 call git bash -- ./test/tint/test-all.sh %BUILD_DIR%/tint.exe --verbose --format %TEST_ALL_FORMATS% || goto :error
 set PATH=%OLD_PATH%
 @echo off

 call :status "Done"
 exit /b 0

 :error
 echo BUILD FAILED! errorlevel: %errorlevel%
 exit /b %errorlevel%
	@rem Copyright 2021 The Dawn & Tint Authors
	@rem
	@rem Redistribution and use in source and binary forms, with or without
	@rem modification, are permitted provided that the following conditions are met:
	@rem
	@rem 1. Redistributions of source code must retain the above copyright notice, this
	@rem list of conditions and the following disclaimer.
	@rem
	@rem 2. Redistributions in binary form must reproduce the above copyright notice,
	@rem this list of conditions and the following disclaimer in the documentation
	@rem and/or other materials provided with the distribution.
	@rem
	@rem 3. Neither the name of the copyright holder nor the names of its
	@rem contributors may be used to endorse or promote products derived from
	@rem this software without specific prior written permission.
	@rem
	@rem THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	@rem AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	@rem IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
	@rem DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
	@rem FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
	@rem DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
	@rem SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
	@rem CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
	@rem OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	@rem OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

	@echo off
	SETLOCAL ENABLEDELAYEDEXPANSION

	goto :main

	:task_begin
	set TASK_NAME=%~1
	echo %TASK_NAME% starting at %Time%
	exit /b 0

	:print_last_task_duration
	if not "%TASK_NAME%" == "" (
	echo %TASK_NAME% completed at %Time%
	)
	exit /b 0

	:status
	echo.
	echo.
	call :print_last_task_duration
	echo.
	echo *****************************************************************
	echo %~1
	echo *****************************************************************
	echo.
	call :task_begin "%~1"
	exit /b 0

	:main

	set ORIGINAL_SRC_DIR= %~dp0\..\..\..
	set TEMP_DIR=%TEMP%\dawn-temp
	set SRC_DIR=%TEMP_DIR%\dawn-src
	set BUILD_DIR=%TEMP_DIR%\dawn-build

	cd /d %ORIGINAL_SRC_DIR%
	if not exist ".git\" (
	echo "ORIGINAL_SRC_DIR should point to project root: %ORIGINAL_SRC_DIR%"
	goto :error
	)

	if exist %TEMP_DIR% (
	call :status "Deleting %TEMP_DIR%"
	del /q/f/s %TEMP_DIR% > NUL \|\| goto :error
	rmdir /q/s %TEMP_DIR% > NUL \|\| goto :error
	)
	mkdir %TEMP_DIR% \|\| goto :error

	call :status "Fetching and installing DXC"
	@echo on
	set DXC_RELEASE="https://github.com/microsoft/DirectXShaderCompiler/releases/download/v1.7.2207/dxc_2022_07_18.zip"
	curl -k -L %DXC_RELEASE% --output "%TEMP_DIR%\dxc_release.zip" \|\| goto :error
	powershell.exe -Command "Expand-Archive -LiteralPath '%TEMP_DIR%\dxc_release.zip' -DestinationPath '%TEMP_DIR%\dxc'" \|\| goto :error
	set DXC_PATH=%TEMP_DIR%\dxc\bin\x64

	call :status "Fetching and installing Windows SDK for d3dcompiler DLL"
	@echo on
	set WINSDK_DLL_INSTALLER=https://go.microsoft.com/fwlink/?linkid=2164145
	set WINSDK_VERSION=10.0.20348.0
	curl -k -L %WINSDK_DLL_INSTALLER% --output "%TEMP_DIR%\winsdksetup.exe" \|\| goto :error
	start "download" /wait "%TEMP_DIR%\winsdksetup.exe" /quiet /norestart /ceip off /features OptionId.DesktopCPPx64 /layout "%TEMP_DIR%\winsdkinstall" \|\| goto :error
	start "install" /wait "%TEMP_DIR%\winsdkinstall\Installers\Windows SDK for Windows Store Apps Tools-x86_en-us.msi" \|\| goto :error
	set D3DCOMPILER_PATH=C:\Program Files (x86)\Windows Kits\10\bin\%WINSDK_VERSION%\x64
	@echo off

	call :status "Installing depot_tools"
	@echo on
	pushd %TEMP_DIR%
	rem For Windows, we must download and extract a bundle.
	rem See https://chromium.googlesource.com/chromium/src/+/HEAD/docs/windows_build_instructions.md#install
	powershell -Command "(New-Object Net.WebClient).DownloadFile('https://storage.googleapis.com/chrome-infra/depot_tools.zip', 'depot_tools.zip')" \|\| goto :error
	powershell -Command "Expand-Archive -Force 'depot_tools.zip' 'depot_tools'" \|\| goto :error
	rem Run gclient once to install deps
	set PATH=%TEMP_DIR%\depot_tools;%PATH%
	set DEPOT_TOOLS_UPDATE=1
	set DEPOT_TOOLS_WIN_TOOLCHAIN=0
	call gclient \|\| goto :error
	@echo off
	popd

	call :status "Cloning to clean source directory"
	@echo on
	mkdir %SRC_DIR% \|\| goto :error
	cd /d %SRC_DIR% \|\| goto :error
	call git clone %ORIGINAL_SRC_DIR% . \|\| goto :error
	@echo off

	call :status "Fetching dependencies"
	@echo on
	copy scripts\standalone.gclient .gclient \|\| goto :error
	call gclient sync \|\| goto :error
	@echo off

	call :status "Adding the Ninja from DEPS to the PATH"
	@echo on
	set PATH=%SRC_DIR%\third_party\ninja;%PATH%
	@echo off

	call :status "Configuring build system"
	@echo on
	mkdir %BUILD_DIR%
	cd /d %BUILD_DIR%
	set COMMON_CMAKE_FLAGS= ^
	-DTINT_BUILD_DOCS=O ^
	-DTINT_BUILD_BENCHMARKS=1 ^
	-DCMAKE_BUILD_TYPE=%BUILD_TYPE% ^
	-DTINT_BUILD_BENCHMARKS=1 ^
	-DTINT_BUILD_SPV_READER=1 ^
	-DTINT_BUILD_WGSL_READER=1 ^
	-DTINT_BUILD_GLSL_WRITER=1 ^
	-DTINT_BUILD_HLSL_WRITER=1 ^
	-DTINT_BUILD_MSL_WRITER=1 ^
	-DTINT_BUILD_SPV_WRITER=1 ^
	-DTINT_BUILD_WGSL_WRITER=1 ^
	-DTINT_RANDOMIZE_HASHES=1

	@echo off

	call :status "Building dawn"
	@echo on
	rem Disable msbuild "Intermediate or Output directory cannot reside in Temporary directory"
	set IgnoreWarnIntDirInTempDetected=true
	rem Add Python3 to path as this Kokoro image only has Python2 in it
	set PATH=C:\Python37;%PATH%
	rem To use ninja with CMake requires VC env vars
	call "C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Auxiliary\Build\vcvars64.bat"
	@echo on
	rem Note that we need to specify the C and C++ compiler only because Cygwin is in PATH and CMake finds GCC and picks that over MSVC
	cmake %SRC_DIR% -G "Ninja" -DCMAKE_C_COMPILER="cl.exe" -DCMAKE_CXX_COMPILER="cl.exe" %COMMON_CMAKE_FLAGS% \|\| goto :error
	cmake --build . \|\| goto :error
	call "C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Auxiliary\Build\vcvars64.bat" /clean_env
	@echo off

	call :status "Running tint_unittests"
	@echo on
	tint_unittests.exe \|\| goto :error
	@echo off

	call :status "Testing test/tint/test-all.sh"
	@echo on
	cd /d %SRC_DIR% \|\| goto :error
	rem Run tests with DXC, FXC and Metal validation
	set OLD_PATH=%PATH%
	set PATH=C:\Program Files\Metal Developer Tools\macos\bin;%PATH%
	if "%BUILD_TYPE%" == "Debug" (
	rem TODO(crbug.com/2034): Add back glsl once we fix the ~7x slowdown in Windows Debug builds
	set TEST_ALL_FORMATS=wgsl,spvasm,msl,hlsl
	) else (
	set TEST_ALL_FORMATS=wgsl,spvasm,msl,hlsl,glsl
	)
	call git bash -- ./test/tint/test-all.sh %BUILD_DIR%/tint.exe --verbose --format %TEST_ALL_FORMATS% \|\| goto :error
	set PATH=%OLD_PATH%
	@echo off

	call :status "Done"
	exit /b 0

	:error
	echo BUILD FAILED! errorlevel: %errorlevel%
	exit /b %errorlevel%