| // Copyright 2019 The Dawn Authors |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| // Trace events are for tracking application performance and resource usage. |
| // Macros are provided to track: |
| // Begin and end of function calls |
| // Counters |
| // |
| // Events are issued against categories. Whereas LOG's |
| // categories are statically defined, TRACE categories are created |
| // implicitly with a string. For example: |
| // TRACE_EVENT_INSTANT0("MY_SUBSYSTEM", "SomeImportantEvent") |
| // |
| // Events can be INSTANT, or can be pairs of BEGIN and END in the same scope: |
| // TRACE_EVENT_BEGIN0("MY_SUBSYSTEM", "SomethingCostly") |
| // doSomethingCostly() |
| // TRACE_EVENT_END0("MY_SUBSYSTEM", "SomethingCostly") |
| // Note: our tools can't always determine the correct BEGIN/END pairs unless |
| // these are used in the same scope. Use ASYNC_BEGIN/ASYNC_END macros if you need them |
| // to be in separate scopes. |
| // |
| // A common use case is to trace entire function scopes. This |
| // issues a trace BEGIN and END automatically: |
| // void doSomethingCostly() { |
| // TRACE_EVENT0("MY_SUBSYSTEM", "doSomethingCostly"); |
| // ... |
| // } |
| // |
| // Additional parameters can be associated with an event: |
| // void doSomethingCostly2(int howMuch) { |
| // TRACE_EVENT1("MY_SUBSYSTEM", "doSomethingCostly", |
| // "howMuch", howMuch); |
| // ... |
| // } |
| // |
| // The trace system will automatically add to this information the |
| // current process id, thread id, and a timestamp in microseconds. |
| // |
| // To trace an asynchronous procedure such as an IPC send/receive, use ASYNC_BEGIN and |
| // ASYNC_END: |
| // [single threaded sender code] |
| // static int send_count = 0; |
| // ++send_count; |
| // TRACE_EVENT_ASYNC_BEGIN0("ipc", "message", send_count); |
| // Send(new MyMessage(send_count)); |
| // [receive code] |
| // void OnMyMessage(send_count) { |
| // TRACE_EVENT_ASYNC_END0("ipc", "message", send_count); |
| // } |
| // The third parameter is a unique ID to match ASYNC_BEGIN/ASYNC_END pairs. |
| // ASYNC_BEGIN and ASYNC_END can occur on any thread of any traced process. Pointers can |
| // be used for the ID parameter, and they will be mangled internally so that |
| // the same pointer on two different processes will not match. For example: |
| // class MyTracedClass { |
| // public: |
| // MyTracedClass() { |
| // TRACE_EVENT_ASYNC_BEGIN0("category", "MyTracedClass", this); |
| // } |
| // ~MyTracedClass() { |
| // TRACE_EVENT_ASYNC_END0("category", "MyTracedClass", this); |
| // } |
| // } |
| // |
| // Trace event also supports counters, which is a way to track a quantity |
| // as it varies over time. Counters are created with the following macro: |
| // TRACE_COUNTER1("MY_SUBSYSTEM", "myCounter", g_myCounterValue); |
| // |
| // Counters are process-specific. The macro itself can be issued from any |
| // thread, however. |
| // |
| // Sometimes, you want to track two counters at once. You can do this with two |
| // counter macros: |
| // TRACE_COUNTER1("MY_SUBSYSTEM", "myCounter0", g_myCounterValue[0]); |
| // TRACE_COUNTER1("MY_SUBSYSTEM", "myCounter1", g_myCounterValue[1]); |
| // Or you can do it with a combined macro: |
| // TRACE_COUNTER2("MY_SUBSYSTEM", "myCounter", |
| // "bytesPinned", g_myCounterValue[0], |
| // "bytesAllocated", g_myCounterValue[1]); |
| // This indicates to the tracing UI that these counters should be displayed |
| // in a single graph, as a summed area chart. |
| // |
| // Since counters are in a global namespace, you may want to disembiguate with a |
| // unique ID, by using the TRACE_COUNTER_ID* variations. |
| // |
| // By default, trace collection is compiled in, but turned off at runtime. |
| // Collecting trace data is the responsibility of the embedding |
| // application. In Chrome's case, navigating to about:tracing will turn on |
| // tracing and display data collected across all active processes. |
| // |
| // |
| // Memory scoping note: |
| // Tracing copies the pointers, not the string content, of the strings passed |
| // in for category, name, and arg_names. Thus, the following code will |
| // cause problems: |
| // char* str = strdup("impprtantName"); |
| // TRACE_EVENT_INSTANT0("SUBSYSTEM", str); // BAD! |
| // free(str); // Trace system now has dangling pointer |
| // |
| // To avoid this issue with the |name| and |arg_name| parameters, use the |
| // TRACE_EVENT_COPY_XXX overloads of the macros at additional runtime overhead. |
| // Notes: The category must always be in a long-lived char* (i.e. static const). |
| // The |arg_values|, when used, are always deep copied with the _COPY |
| // macros. |
| // |
| // When are string argument values copied: |
| // const char* arg_values are only referenced by default: |
| // TRACE_EVENT1("category", "name", |
| // "arg1", "literal string is only referenced"); |
| // Use TRACE_STR_COPY to force copying of a const char*: |
| // TRACE_EVENT1("category", "name", |
| // "arg1", TRACE_STR_COPY("string will be copied")); |
| // std::string arg_values are always copied: |
| // TRACE_EVENT1("category", "name", |
| // "arg1", std::string("string will be copied")); |
| // |
| // |
| // Thread Safety: |
| // A thread safe singleton and mutex are used for thread safety. Category |
| // enabled flags are used to limit the performance impact when the system |
| // is not enabled. |
| // |
| // TRACE_EVENT macros first cache a pointer to a category. The categories are |
| // statically allocated and safe at all times, even after exit. Fetching a |
| // category is protected by the TraceLog::lock_. Multiple threads initializing |
| // the static variable is safe, as they will be serialized by the lock and |
| // multiple calls will return the same pointer to the category. |
| // |
| // Then the category_enabled flag is checked. This is a unsigned char, and |
| // not intended to be multithread safe. It optimizes access to addTraceEvent |
| // which is threadsafe internally via TraceLog::lock_. The enabled flag may |
| // cause some threads to incorrectly call or skip calling addTraceEvent near |
| // the time of the system being enabled or disabled. This is acceptable as |
| // we tolerate some data loss while the system is being enabled/disabled and |
| // because addTraceEvent is threadsafe internally and checks the enabled state |
| // again under lock. |
| // |
| // Without the use of these static category pointers and enabled flags all |
| // trace points would carry a significant performance cost of aquiring a lock |
| // and resolving the category. |
| |
| #ifndef DAWNPLATFORM_TRACING_TRACEEVENT_H_ |
| #define DAWNPLATFORM_TRACING_TRACEEVENT_H_ |
| |
| #include <string> |
| |
| #include "dawn_platform/tracing/EventTracer.h" |
| |
| // Records a pair of begin and end events called "name" for the current |
| // scope, with 0, 1 or 2 associated arguments. If the category is not |
| // enabled, then this does nothing. |
| // - category and name strings must have application lifetime (statics or |
| // literals). They may not include " chars. |
| #define TRACE_EVENT0(platform, category, name) \ |
| INTERNAL_TRACE_EVENT_ADD_SCOPED(platform, category, name, 0) |
| #define TRACE_EVENT1(platform, category, name, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD_SCOPED(platform, category, name, 0, arg1_name, arg1_val) |
| #define TRACE_EVENT2(platform, category, name, arg1_name, arg1_val, arg2_name, arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD_SCOPED(platform, category, name, 0, arg1_name, arg1_val, arg2_name, \ |
| arg2_val) |
| |
| // Records a single event called "name" immediately, with 0, 1 or 2 |
| // associated arguments. If the category is not enabled, then this |
| // does nothing. |
| // - category and name strings must have application lifetime (statics or |
| // literals). They may not include " chars. |
| #define TRACE_EVENT_INSTANT0(platform, category, name) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_INSTANT, category, name, \ |
| TRACE_EVENT_FLAG_NONE, 0) |
| #define TRACE_EVENT_INSTANT1(platform, category, name, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_INSTANT, category, name, \ |
| TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val) |
| #define TRACE_EVENT_INSTANT2(platform, category, name, arg1_name, arg1_val, arg2_name, arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_INSTANT, category, name, \ |
| TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val, arg2_name, arg2_val) |
| #define TRACE_EVENT_COPY_INSTANT0(platform, category, name) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_INSTANT, category, name, \ |
| TRACE_EVENT_FLAG_COPY, 0) |
| #define TRACE_EVENT_COPY_INSTANT1(platform, category, name, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_INSTANT, category, name, \ |
| TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val) |
| #define TRACE_EVENT_COPY_INSTANT2(platform, category, name, arg1_name, arg1_val, arg2_name, \ |
| arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_INSTANT, category, name, \ |
| TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val, arg2_name, arg2_val) |
| |
| // Records a single BEGIN event called "name" immediately, with 0, 1 or 2 |
| // associated arguments. If the category is not enabled, then this |
| // does nothing. |
| // - category and name strings must have application lifetime (statics or |
| // literals). They may not include " chars. |
| #define TRACE_EVENT_BEGIN0(platform, category, name) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_BEGIN, category, name, \ |
| TRACE_EVENT_FLAG_NONE, 0) |
| #define TRACE_EVENT_BEGIN1(platform, category, name, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_BEGIN, category, name, \ |
| TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val) |
| #define TRACE_EVENT_BEGIN2(platform, category, name, arg1_name, arg1_val, arg2_name, arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_BEGIN, category, name, \ |
| TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val, arg2_name, arg2_val) |
| #define TRACE_EVENT_COPY_BEGIN0(platform, category, name) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_BEGIN, category, name, \ |
| TRACE_EVENT_FLAG_COPY, 0) |
| #define TRACE_EVENT_COPY_BEGIN1(platform, category, name, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_BEGIN, category, name, \ |
| TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val) |
| #define TRACE_EVENT_COPY_BEGIN2(platform, category, name, arg1_name, arg1_val, arg2_name, \ |
| arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_BEGIN, category, name, \ |
| TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val, arg2_name, arg2_val) |
| |
| // Records a single END event for "name" immediately. If the category |
| // is not enabled, then this does nothing. |
| // - category and name strings must have application lifetime (statics or |
| // literals). They may not include " chars. |
| #define TRACE_EVENT_END0(platform, category, name) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_END, category, name, \ |
| TRACE_EVENT_FLAG_NONE, 0) |
| #define TRACE_EVENT_END1(platform, category, name, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_END, category, name, \ |
| TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val) |
| #define TRACE_EVENT_END2(platform, category, name, arg1_name, arg1_val, arg2_name, arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_END, category, name, \ |
| TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val, arg2_name, arg2_val) |
| #define TRACE_EVENT_COPY_END0(platform, category, name) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_END, category, name, TRACE_EVENT_FLAG_COPY) |
| #define TRACE_EVENT_COPY_END1(platform, category, name, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_END, category, name, \ |
| TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val) |
| #define TRACE_EVENT_COPY_END2(platform, category, name, arg1_name, arg1_val, arg2_name, arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_END, category, name, \ |
| TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val, arg2_name, arg2_val) |
| |
| // Records the value of a counter called "name" immediately. Value |
| // must be representable as a 32 bit integer. |
| // - category and name strings must have application lifetime (statics or |
| // literals). They may not include " chars. |
| #define TRACE_COUNTER1(platform, category, name, value) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_COUNTER, category, name, \ |
| TRACE_EVENT_FLAG_NONE, 0, "value", static_cast<int>(value)) |
| #define TRACE_COPY_COUNTER1(platform, category, name, value) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_COUNTER, category, name, \ |
| TRACE_EVENT_FLAG_COPY, 0, "value", static_cast<int>(value)) |
| |
| // Records the values of a multi-parted counter called "name" immediately. |
| // The UI will treat value1 and value2 as parts of a whole, displaying their |
| // values as a stacked-bar chart. |
| // - category and name strings must have application lifetime (statics or |
| // literals). They may not include " chars. |
| #define TRACE_COUNTER2(platform, category, name, value1_name, value1_val, value2_name, value2_val) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_COUNTER, category, name, \ |
| TRACE_EVENT_FLAG_NONE, 0, value1_name, static_cast<int>(value1_val), \ |
| value2_name, static_cast<int>(value2_val)) |
| #define TRACE_COPY_COUNTER2(platform, category, name, value1_name, value1_val, value2_name, \ |
| value2_val) \ |
| INTERNAL_TRACE_EVENT_ADD(platform, TRACE_EVENT_PHASE_COUNTER, category, name, \ |
| TRACE_EVENT_FLAG_COPY, 0, value1_name, static_cast<int>(value1_val), \ |
| value2_name, static_cast<int>(value2_val)) |
| |
| // Records the value of a counter called "name" immediately. Value |
| // must be representable as a 32 bit integer. |
| // - category and name strings must have application lifetime (statics or |
| // literals). They may not include " chars. |
| // - |id| is used to disambiguate counters with the same name. It must either |
| // be a pointer or an integer value up to 64 bits. If it's a pointer, the bits |
| // will be xored with a hash of the process ID so that the same pointer on |
| // two different processes will not collide. |
| #define TRACE_COUNTER_ID1(platform, category, name, id, value) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_COUNTER, category, name, id, \ |
| TRACE_EVENT_FLAG_NONE, 0, "value", static_cast<int>(value)) |
| #define TRACE_COPY_COUNTER_ID1(platform, category, name, id, value) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_COUNTER, category, name, id, \ |
| TRACE_EVENT_FLAG_COPY, 0, "value", static_cast<int>(value)) |
| |
| // Records the values of a multi-parted counter called "name" immediately. |
| // The UI will treat value1 and value2 as parts of a whole, displaying their |
| // values as a stacked-bar chart. |
| // - category and name strings must have application lifetime (statics or |
| // literals). They may not include " chars. |
| // - |id| is used to disambiguate counters with the same name. It must either |
| // be a pointer or an integer value up to 64 bits. If it's a pointer, the bits |
| // will be xored with a hash of the process ID so that the same pointer on |
| // two different processes will not collide. |
| #define TRACE_COUNTER_ID2(platform, category, name, id, value1_name, value1_val, value2_name, \ |
| value2_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ |
| platform, TRACE_EVENT_PHASE_COUNTER, category, name, id, TRACE_EVENT_FLAG_NONE, 0, \ |
| value1_name, static_cast<int>(value1_val), value2_name, static_cast<int>(value2_val)) |
| #define TRACE_COPY_COUNTER_ID2(platform, category, name, id, value1_name, value1_val, value2_name, \ |
| value2_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ |
| platform, TRACE_EVENT_PHASE_COUNTER, category, name, id, TRACE_EVENT_FLAG_COPY, 0, \ |
| value1_name, static_cast<int>(value1_val), value2_name, static_cast<int>(value2_val)) |
| |
| // Records a single ASYNC_BEGIN event called "name" immediately, with 0, 1 or 2 |
| // associated arguments. If the category is not enabled, then this |
| // does nothing. |
| // - category and name strings must have application lifetime (statics or |
| // literals). They may not include " chars. |
| // - |id| is used to match the ASYNC_BEGIN event with the ASYNC_END event. ASYNC |
| // events are considered to match if their category, name and id values all |
| // match. |id| must either be a pointer or an integer value up to 64 bits. If |
| // it's a pointer, the bits will be xored with a hash of the process ID so |
| // that the same pointer on two different processes will not collide. |
| // An asynchronous operation can consist of multiple phases. The first phase is |
| // defined by the ASYNC_BEGIN calls. Additional phases can be defined using the |
| // ASYNC_STEP_BEGIN macros. When the operation completes, call ASYNC_END. |
| // An async operation can span threads and processes, but all events in that |
| // operation must use the same |name| and |id|. Each event can have its own |
| // args. |
| #define TRACE_EVENT_ASYNC_BEGIN0(platform, category, name, id) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_BEGIN, category, name, id, \ |
| TRACE_EVENT_FLAG_NONE, 0) |
| #define TRACE_EVENT_ASYNC_BEGIN1(platform, category, name, id, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_BEGIN, category, name, id, \ |
| TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val) |
| #define TRACE_EVENT_ASYNC_BEGIN2(platform, category, name, id, arg1_name, arg1_val, arg2_name, \ |
| arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_BEGIN, category, name, id, \ |
| TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val, arg2_name, \ |
| arg2_val) |
| #define TRACE_EVENT_COPY_ASYNC_BEGIN0(platform, category, name, id) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_BEGIN, category, name, id, \ |
| TRACE_EVENT_FLAG_COPY, 0) |
| #define TRACE_EVENT_COPY_ASYNC_BEGIN1(platform, category, name, id, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_BEGIN, category, name, id, \ |
| TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val) |
| #define TRACE_EVENT_COPY_ASYNC_BEGIN2(platform, category, name, id, arg1_name, arg1_val, \ |
| arg2_name, arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_BEGIN, category, name, id, \ |
| TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val, arg2_name, \ |
| arg2_val) |
| |
| // Records a single ASYNC_STEP event for |step| immediately. If the category |
| // is not enabled, then this does nothing. The |name| and |id| must match the |
| // ASYNC_BEGIN event above. The |step| param identifies this step within the |
| // async event. This should be called at the beginning of the next phase of an |
| // asynchronous operation. |
| #define TRACE_EVENT_ASYNC_STEP0(platform, category, name, id, step) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_STEP, category, name, id, \ |
| TRACE_EVENT_FLAG_NONE, 0, "step", step) |
| #define TRACE_EVENT_ASYNC_STEP1(platform, category, name, id, step, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_STEP, category, name, id, \ |
| TRACE_EVENT_FLAG_NONE, 0, "step", step, arg1_name, arg1_val) |
| #define TRACE_EVENT_COPY_ASYNC_STEP0(platform, category, name, id, step) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_STEP, category, name, id, \ |
| TRACE_EVENT_FLAG_COPY, 0, "step", step) |
| #define TRACE_EVENT_COPY_ASYNC_STEP1(platform, category, name, id, step, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_STEP, category, name, id, \ |
| TRACE_EVENT_FLAG_COPY, 0, "step", step, arg1_name, arg1_val) |
| |
| // Records a single ASYNC_END event for "name" immediately. If the category |
| // is not enabled, then this does nothing. |
| #define TRACE_EVENT_ASYNC_END0(platform, category, name, id) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_END, category, name, id, \ |
| TRACE_EVENT_FLAG_NONE, 0) |
| #define TRACE_EVENT_ASYNC_END1(platform, category, name, id, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_END, category, name, id, \ |
| TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val) |
| #define TRACE_EVENT_ASYNC_END2(platform, category, name, id, arg1_name, arg1_val, arg2_name, \ |
| arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_END, category, name, id, \ |
| TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val, arg2_name, \ |
| arg2_val) |
| #define TRACE_EVENT_COPY_ASYNC_END0(platform, category, name, id) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_END, category, name, id, \ |
| TRACE_EVENT_FLAG_COPY, 0) |
| #define TRACE_EVENT_COPY_ASYNC_END1(platform, category, name, id, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_END, category, name, id, \ |
| TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val) |
| #define TRACE_EVENT_COPY_ASYNC_END2(platform, category, name, id, arg1_name, arg1_val, arg2_name, \ |
| arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_ASYNC_END, category, name, id, \ |
| TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val, arg2_name, \ |
| arg2_val) |
| |
| // NESTABLE_ASYNC_* APIs are used to describe an async operation, which can |
| // be nested within a NESTABLE_ASYNC event and/or have inner NESTABLE_ASYNC |
| // events. |
| // - category and name strings must have application lifetime (statics or |
| // literals). They may not include " chars. |
| // - A pair of NESTABLE_ASYNC_BEGIN event and NESTABLE_ASYNC_END event is |
| // considered as a match if their category_group, name and id all match. |
| // - |id| must either be a pointer or an integer value up to 64 bits. |
| // If it's a pointer, the bits will be xored with a hash of the process ID so |
| // that the same pointer on two different processes will not collide. |
| // - |id| is used to match a child NESTABLE_ASYNC event with its parent |
| // NESTABLE_ASYNC event. Therefore, events in the same nested event tree must |
| // be logged using the same id and category_group. |
| // |
| // Unmatched NESTABLE_ASYNC_END event will be parsed as an event that starts |
| // at the first NESTABLE_ASYNC event of that id, and unmatched |
| // NESTABLE_ASYNC_BEGIN event will be parsed as an event that ends at the last |
| // NESTABLE_ASYNC event of that id. Corresponding warning messages for |
| // unmatched events will be shown in the analysis view. |
| |
| // Records a single NESTABLE_ASYNC_BEGIN event called "name" immediately, with |
| // 0, 1 or 2 associated arguments. If the category is not enabled, then this |
| // does nothing. |
| #define TRACE_EVENT_NESTABLE_ASYNC_BEGIN0(platform, category_group, name, id) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, \ |
| category_group, name, id, TRACE_EVENT_FLAG_NONE, 0) |
| #define TRACE_EVENT_NESTABLE_ASYNC_BEGIN1(platform, category_group, name, id, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, \ |
| category_group, name, id, TRACE_EVENT_FLAG_NONE, 0, \ |
| arg1_name, arg1_val) |
| #define TRACE_EVENT_NESTABLE_ASYNC_BEGIN2(platform, category_group, name, id, arg1_name, arg1_val, \ |
| arg2_name, arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, \ |
| category_group, name, id, TRACE_EVENT_FLAG_NONE, 0, \ |
| arg1_name, arg1_val, arg2_name, arg2_val) |
| // Records a single NESTABLE_ASYNC_END event called "name" immediately, with 0 |
| // or 2 associated arguments. If the category is not enabled, then this does |
| // nothing. |
| #define TRACE_EVENT_NESTABLE_ASYNC_END0(platform, category_group, name, id) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, \ |
| category_group, name, id, TRACE_EVENT_FLAG_NONE, 0) |
| // Records a single NESTABLE_ASYNC_END event called "name" immediately, with 1 |
| // associated argument. If the category is not enabled, then this does nothing. |
| #define TRACE_EVENT_NESTABLE_ASYNC_END1(platform, category_group, name, id, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, \ |
| category_group, name, id, TRACE_EVENT_FLAG_NONE, 0, \ |
| arg1_name, arg1_val) |
| #define TRACE_EVENT_NESTABLE_ASYNC_END2(platform, category_group, name, id, arg1_name, arg1_val, \ |
| arg2_name, arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, \ |
| category_group, name, id, TRACE_EVENT_FLAG_NONE, 0, \ |
| arg1_name, arg1_val, arg2_name, arg2_val) |
| |
| // Records a single NESTABLE_ASYNC_INSTANT event called "name" immediately, |
| // with none, one or two associated argument. If the category is not enabled, |
| // then this does nothing. |
| #define TRACE_EVENT_NESTABLE_ASYNC_INSTANT0(platform, category_group, name, id) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_INSTANT, \ |
| category_group, name, id, TRACE_EVENT_FLAG_NONE, 0) |
| |
| #define TRACE_EVENT_NESTABLE_ASYNC_INSTANT1(platform, category_group, name, id, arg1_name, \ |
| arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_INSTANT, \ |
| category_group, name, id, TRACE_EVENT_FLAG_NONE, 0, \ |
| arg1_name, arg1_val) |
| |
| #define TRACE_EVENT_NESTABLE_ASYNC_INSTANT2(platform, category_group, name, id, arg1_name, \ |
| arg1_val, arg2_name, arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_INSTANT, \ |
| category_group, name, id, TRACE_EVENT_FLAG_NONE, 0, \ |
| arg1_name, arg1_val, arg2_name, arg2_val) |
| |
| #define TRACE_EVENT_COPY_NESTABLE_ASYNC_BEGIN_WITH_TTS2(platform, category_group, name, id, \ |
| arg1_name, arg1_val, arg2_name, arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, \ |
| category_group, name, id, \ |
| TRACE_EVENT_FLAG_ASYNC_TTS | TRACE_EVENT_FLAG_COPY, 0, \ |
| arg1_name, arg1_val, arg2_name, arg2_val) |
| #define TRACE_EVENT_COPY_NESTABLE_ASYNC_END_WITH_TTS2(platform, category_group, name, id, \ |
| arg1_name, arg1_val, arg2_name, arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, \ |
| category_group, name, id, \ |
| TRACE_EVENT_FLAG_ASYNC_TTS | TRACE_EVENT_FLAG_COPY, 0, \ |
| arg1_name, arg1_val, arg2_name, arg2_val) |
| |
| // Similar to TRACE_EVENT_NESTABLE_ASYNC_{BEGIN,END}x but with a custom |
| // |timestamp| provided. |
| #define TRACE_EVENT_NESTABLE_ASYNC_BEGIN_WITH_TIMESTAMP0(platform, category_group, name, id, \ |
| timestamp) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ |
| platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, category_group, name, id, \ |
| TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE, 0) |
| #define TRACE_EVENT_NESTABLE_ASYNC_END_WITH_TIMESTAMP0(platform, category_group, name, id, \ |
| timestamp) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ |
| platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, category_group, name, id, \ |
| TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE, 0) |
| #define TRACE_EVENT_NESTABLE_ASYNC_END_WITH_TIMESTAMP1(platform, category_group, name, id, \ |
| timestamp, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ |
| platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, category_group, name, id, \ |
| TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE, 0, arg1_name, \ |
| arg1_val) |
| #define TRACE_EVENT_NESTABLE_ASYNC_INSTANT_WITH_TIMESTAMP0(platform, category_group, name, id, \ |
| timestamp) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ |
| platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_INSTANT, category_group, name, id, \ |
| TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE, 0) |
| #define TRACE_EVENT_COPY_NESTABLE_ASYNC_BEGIN_WITH_TIMESTAMP0(platform, category_group, name, id, \ |
| timestamp) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ |
| platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, category_group, name, id, \ |
| TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_COPY, 0) |
| #define TRACE_EVENT_COPY_NESTABLE_ASYNC_END_WITH_TIMESTAMP0(platform, category_group, name, id, \ |
| timestamp) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ |
| platform, TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, category_group, name, id, \ |
| TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_COPY, 0) |
| |
| // Records a single FLOW_BEGIN event called "name" immediately, with 0, 1 or 2 |
| // associated arguments. If the category is not enabled, then this |
| // does nothing. |
| // - category and name strings must have application lifetime (statics or |
| // literals). They may not include " chars. |
| // - |id| is used to match the FLOW_BEGIN event with the FLOW_END event. FLOW |
| // events are considered to match if their category_group, name and id values |
| // all match. |id| must either be a pointer or an integer value up to 64 bits. |
| // If it's a pointer, the bits will be xored with a hash of the process ID so |
| // that the same pointer on two different processes will not collide. |
| // FLOW events are different from ASYNC events in how they are drawn by the |
| // tracing UI. A FLOW defines asynchronous data flow, such as posting a task |
| // (FLOW_BEGIN) and later executing that task (FLOW_END). Expect FLOWs to be |
| // drawn as lines or arrows from FLOW_BEGIN scopes to FLOW_END scopes. Similar |
| // to ASYNC, a FLOW can consist of multiple phases. The first phase is defined |
| // by the FLOW_BEGIN calls. Additional phases can be defined using the FLOW_STEP |
| // macros. When the operation completes, call FLOW_END. An async operation can |
| // span threads and processes, but all events in that operation must use the |
| // same |name| and |id|. Each event can have its own args. |
| #define TRACE_EVENT_FLOW_BEGIN0(platform, category_group, name, id) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_BEGIN, category_group, name, \ |
| id, TRACE_EVENT_FLAG_NONE, 0) |
| #define TRACE_EVENT_FLOW_BEGIN1(platform, category_group, name, id, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_BEGIN, category_group, name, \ |
| id, TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val) |
| #define TRACE_EVENT_FLOW_BEGIN2(platform, category_group, name, id, arg1_name, arg1_val, \ |
| arg2_name, arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_BEGIN, category_group, name, \ |
| id, TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val, arg2_name, \ |
| arg2_val) |
| #define TRACE_EVENT_COPY_FLOW_BEGIN0(platform, category_group, name, id) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_BEGIN, category_group, name, \ |
| id, TRACE_EVENT_FLAG_COPY, 0) |
| #define TRACE_EVENT_COPY_FLOW_BEGIN1(platform, category_group, name, id, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_BEGIN, category_group, name, \ |
| id, TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val) |
| #define TRACE_EVENT_COPY_FLOW_BEGIN2(platform, category_group, name, id, arg1_name, arg1_val, \ |
| arg2_name, arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_BEGIN, category_group, name, \ |
| id, TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val, arg2_name, \ |
| arg2_val) |
| |
| // Records a single FLOW_STEP event for |step| immediately. If the category |
| // is not enabled, then this does nothing. The |name| and |id| must match the |
| // FLOW_BEGIN event above. The |step| param identifies this step within the |
| // async event. This should be called at the beginning of the next phase of an |
| // asynchronous operation. |
| #define TRACE_EVENT_FLOW_STEP0(platform, category_group, name, id, step) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_STEP, category_group, name, \ |
| id, TRACE_EVENT_FLAG_NONE, 0, "step", step) |
| #define TRACE_EVENT_FLOW_STEP1(platform, category_group, name, id, step, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_STEP, category_group, name, \ |
| id, TRACE_EVENT_FLAG_NONE, 0, "step", step, arg1_name, \ |
| arg1_val) |
| #define TRACE_EVENT_COPY_FLOW_STEP0(platform, category_group, name, id, step) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_STEP, category_group, name, \ |
| id, TRACE_EVENT_FLAG_COPY, 0, "step", step) |
| #define TRACE_EVENT_COPY_FLOW_STEP1(platform, category_group, name, id, step, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_STEP, category_group, name, \ |
| id, TRACE_EVENT_FLAG_COPY, 0, "step", step, arg1_name, \ |
| arg1_val) |
| |
| // Records a single FLOW_END event for "name" immediately. If the category |
| // is not enabled, then this does nothing. |
| #define TRACE_EVENT_FLOW_END0(platform, category_group, name, id) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_END, category_group, name, \ |
| id, TRACE_EVENT_FLAG_NONE, 0) |
| #define TRACE_EVENT_FLOW_END_BIND_TO_ENCLOSING0(platform, category_group, name, id) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_END, category_group, name, \ |
| id, TRACE_EVENT_FLAG_BIND_TO_ENCLOSING, 0) |
| #define TRACE_EVENT_FLOW_END1(platform, category_group, name, id, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_END, category_group, name, \ |
| id, TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val) |
| #define TRACE_EVENT_FLOW_END2(platform, category_group, name, id, arg1_name, arg1_val, arg2_name, \ |
| arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_END, category_group, name, \ |
| id, TRACE_EVENT_FLAG_NONE, 0, arg1_name, arg1_val, arg2_name, \ |
| arg2_val) |
| #define TRACE_EVENT_COPY_FLOW_END0(platform, category_group, name, id) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_END, category_group, name, \ |
| id, TRACE_EVENT_FLAG_COPY, 0) |
| #define TRACE_EVENT_COPY_FLOW_END1(platform, category_group, name, id, arg1_name, arg1_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_END, category_group, name, \ |
| id, TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val) |
| #define TRACE_EVENT_COPY_FLOW_END2(platform, category_group, name, id, arg1_name, arg1_val, \ |
| arg2_name, arg2_val) \ |
| INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, TRACE_EVENT_PHASE_FLOW_END, category_group, name, \ |
| id, TRACE_EVENT_FLAG_COPY, 0, arg1_name, arg1_val, arg2_name, \ |
| arg2_val) |
| |
| // Creates a scope of a sampling state with the given category and name (both must |
| // be constant strings). These states are intended for a sampling profiler. |
| // Implementation note: we store category and name together because we don't |
| // want the inconsistency/expense of storing two pointers. |
| // |thread_bucket| is [0..2] and is used to statically isolate samples in one |
| // thread from others. |
| // |
| // { // The sampling state is set within this scope. |
| // TRACE_EVENT_SAMPLING_STATE_SCOPE_FOR_BUCKET(0, "category", "name"); |
| // ...; |
| // } |
| #define TRACE_EVENT_SCOPED_SAMPLING_STATE_FOR_BUCKET(bucket_number, category, name) \ |
| TraceEvent::SamplingStateScope<bucket_number> traceEventSamplingScope(category "\0" name); |
| |
| // Returns a current sampling state of the given bucket. |
| // The format of the returned string is "category\0name". |
| #define TRACE_EVENT_GET_SAMPLING_STATE_FOR_BUCKET(bucket_number) \ |
| TraceEvent::SamplingStateScope<bucket_number>::current() |
| |
| // Sets a current sampling state of the given bucket. |
| // |category| and |name| have to be constant strings. |
| #define TRACE_EVENT_SET_SAMPLING_STATE_FOR_BUCKET(bucket_number, category, name) \ |
| TraceEvent::SamplingStateScope<bucket_number>::set(category "\0" name) |
| |
| // Sets a current sampling state of the given bucket. |
| // |categoryAndName| doesn't need to be a constant string. |
| // The format of the string is "category\0name". |
| #define TRACE_EVENT_SET_NONCONST_SAMPLING_STATE_FOR_BUCKET(bucket_number, categoryAndName) \ |
| TraceEvent::SamplingStateScope<bucket_number>::set(categoryAndName) |
| |
| // Syntactic sugars for the sampling tracing in the main thread. |
| #define TRACE_EVENT_SCOPED_SAMPLING_STATE(category, name) \ |
| TRACE_EVENT_SCOPED_SAMPLING_STATE_FOR_BUCKET(0, category, name) |
| #define TRACE_EVENT_GET_SAMPLING_STATE() TRACE_EVENT_GET_SAMPLING_STATE_FOR_BUCKET(0) |
| #define TRACE_EVENT_SET_SAMPLING_STATE(category, name) \ |
| TRACE_EVENT_SET_SAMPLING_STATE_FOR_BUCKET(0, category, name) |
| #define TRACE_EVENT_SET_NONCONST_SAMPLING_STATE(categoryAndName) \ |
| TRACE_EVENT_SET_NONCONST_SAMPLING_STATE_FOR_BUCKET(0, categoryAndName) |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // Implementation specific tracing API definitions. |
| |
| // Get a pointer to the enabled state of the given trace category. Only |
| // long-lived literal strings should be given as the category name. The returned |
| // pointer can be held permanently in a local static for example. If the |
| // unsigned char is non-zero, tracing is enabled. If tracing is enabled, |
| // TRACE_EVENT_API_ADD_TRACE_EVENT can be called. It's OK if tracing is disabled |
| // between the load of the tracing state and the call to |
| // TRACE_EVENT_API_ADD_TRACE_EVENT, because this flag only provides an early out |
| // for best performance when tracing is disabled. |
| // const unsigned char* |
| // TRACE_EVENT_API_GET_CATEGORY_ENABLED(const char* category_name) |
| #define TRACE_EVENT_API_GET_CATEGORY_ENABLED dawn_platform::tracing::GetTraceCategoryEnabledFlag |
| |
| // Add a trace event to the platform tracing system. |
| // void TRACE_EVENT_API_ADD_TRACE_EVENT( |
| // char phase, |
| // const unsigned char* category_enabled, |
| // const char* name, |
| // unsigned long long id, |
| // int num_args, |
| // const char** arg_names, |
| // const unsigned char* arg_types, |
| // const unsigned long long* arg_values, |
| // unsigned char flags) |
| #define TRACE_EVENT_API_ADD_TRACE_EVENT dawn_platform::tracing::AddTraceEvent |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| |
| // Implementation detail: trace event macros create temporary variables |
| // to keep instrumentation overhead low. These macros give each temporary |
| // variable a unique name based on the line number to prevent name collissions. |
| #define INTERNAL_TRACE_EVENT_UID3(a, b) trace_event_unique_##a##b |
| #define INTERNAL_TRACE_EVENT_UID2(a, b) INTERNAL_TRACE_EVENT_UID3(a, b) |
| #define INTERNALTRACEEVENTUID(name_prefix) INTERNAL_TRACE_EVENT_UID2(name_prefix, __LINE__) |
| |
| // Implementation detail: internal macro to create static category. |
| #define INTERNAL_TRACE_EVENT_GET_CATEGORY_INFO(platform, category) \ |
| static const unsigned char* INTERNALTRACEEVENTUID(catstatic) = 0; \ |
| if (!INTERNALTRACEEVENTUID(catstatic)) \ |
| INTERNALTRACEEVENTUID(catstatic) = TRACE_EVENT_API_GET_CATEGORY_ENABLED(platform, category); |
| |
| // Implementation detail: internal macro to create static category and add |
| // event if the category is enabled. |
| #define INTERNAL_TRACE_EVENT_ADD(platform, phase, category, name, flags, ...) \ |
| do { \ |
| INTERNAL_TRACE_EVENT_GET_CATEGORY_INFO(platform, ::dawn_platform::TraceCategory::category) \ |
| if (*INTERNALTRACEEVENTUID(catstatic)) { \ |
| dawn_platform::TraceEvent::addTraceEvent( \ |
| platform, phase, INTERNALTRACEEVENTUID(catstatic), name, \ |
| dawn_platform::TraceEvent::noEventId, flags, __VA_ARGS__); \ |
| } \ |
| } while (0) |
| |
| // Implementation detail: internal macro to create static category and add begin |
| // event if the category is enabled. Also adds the end event when the scope |
| // ends. |
| #define INTERNAL_TRACE_EVENT_ADD_SCOPED(platform, category, name, ...) \ |
| INTERNAL_TRACE_EVENT_GET_CATEGORY_INFO(platform, ::dawn_platform::TraceCategory::category) \ |
| dawn_platform::TraceEvent::TraceEndOnScopeClose INTERNALTRACEEVENTUID(profileScope); \ |
| do { \ |
| if (*INTERNALTRACEEVENTUID(catstatic)) { \ |
| dawn_platform::TraceEvent::addTraceEvent( \ |
| platform, TRACE_EVENT_PHASE_BEGIN, INTERNALTRACEEVENTUID(catstatic), name, \ |
| dawn_platform::TraceEvent::noEventId, TRACE_EVENT_FLAG_NONE, __VA_ARGS__); \ |
| INTERNALTRACEEVENTUID(profileScope) \ |
| .initialize(platform, INTERNALTRACEEVENTUID(catstatic), name); \ |
| } \ |
| } while (0) |
| |
| // Implementation detail: internal macro to create static category and add |
| // event if the category is enabled. |
| #define INTERNAL_TRACE_EVENT_ADD_WITH_ID(platform, phase, category, name, id, flags, ...) \ |
| do { \ |
| INTERNAL_TRACE_EVENT_GET_CATEGORY_INFO(platform, ::dawn_platform::TraceCategory::category) \ |
| if (*INTERNALTRACEEVENTUID(catstatic)) { \ |
| unsigned char traceEventFlags = flags | TRACE_EVENT_FLAG_HAS_ID; \ |
| dawn_platform::TraceEvent::TraceID traceEventTraceID(id, &traceEventFlags); \ |
| dawn_platform::TraceEvent::addTraceEvent( \ |
| platform, phase, INTERNALTRACEEVENTUID(catstatic), name, traceEventTraceID.data(), \ |
| traceEventFlags, __VA_ARGS__); \ |
| } \ |
| } while (0) |
| |
| // Notes regarding the following definitions: |
| // New values can be added and propagated to third party libraries, but existing |
| // definitions must never be changed, because third party libraries may use old |
| // definitions. |
| |
| // Phase indicates the nature of an event entry. E.g. part of a begin/end pair. |
| #define TRACE_EVENT_PHASE_BEGIN ('B') |
| #define TRACE_EVENT_PHASE_END ('E') |
| #define TRACE_EVENT_PHASE_INSTANT ('I') |
| #define TRACE_EVENT_PHASE_ASYNC_BEGIN ('S') |
| #define TRACE_EVENT_PHASE_ASYNC_STEP ('T') |
| #define TRACE_EVENT_PHASE_ASYNC_END ('F') |
| #define TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN ('b') |
| #define TRACE_EVENT_PHASE_NESTABLE_ASYNC_END ('e') |
| #define TRACE_EVENT_PHASE_NESTABLE_ASYNC_INSTANT ('n') |
| #define TRACE_EVENT_PHASE_FLOW_BEGIN ('s') |
| #define TRACE_EVENT_PHASE_FLOW_STEP ('t') |
| #define TRACE_EVENT_PHASE_FLOW_END ('f') |
| #define TRACE_EVENT_PHASE_METADATA ('M') |
| #define TRACE_EVENT_PHASE_COUNTER ('C') |
| #define TRACE_EVENT_PHASE_SAMPLE ('P') |
| |
| // Flags for changing the behavior of TRACE_EVENT_API_ADD_TRACE_EVENT. |
| #define TRACE_EVENT_FLAG_NONE (static_cast<unsigned char>(0)) |
| #define TRACE_EVENT_FLAG_COPY (static_cast<unsigned char>(1 << 0)) |
| #define TRACE_EVENT_FLAG_HAS_ID (static_cast<unsigned char>(1 << 1)) |
| #define TRACE_EVENT_FLAG_MANGLE_ID (static_cast<unsigned char>(1 << 2)) |
| |
| // Type values for identifying types in the TraceValue union. |
| #define TRACE_VALUE_TYPE_BOOL (static_cast<unsigned char>(1)) |
| #define TRACE_VALUE_TYPE_UINT (static_cast<unsigned char>(2)) |
| #define TRACE_VALUE_TYPE_INT (static_cast<unsigned char>(3)) |
| #define TRACE_VALUE_TYPE_DOUBLE (static_cast<unsigned char>(4)) |
| #define TRACE_VALUE_TYPE_POINTER (static_cast<unsigned char>(5)) |
| #define TRACE_VALUE_TYPE_STRING (static_cast<unsigned char>(6)) |
| #define TRACE_VALUE_TYPE_COPY_STRING (static_cast<unsigned char>(7)) |
| |
| namespace dawn_platform { namespace TraceEvent { |
| |
| // Specify these values when the corresponding argument of addTraceEvent is not |
| // used. |
| const int zeroNumArgs = 0; |
| const unsigned long long noEventId = 0; |
| |
| // TraceID encapsulates an ID that can either be an integer or pointer. Pointers |
| // are mangled with the Process ID so that they are unlikely to collide when the |
| // same pointer is used on different processes. |
| class TraceID { |
| public: |
| explicit TraceID(const void* id, unsigned char* flags) |
| : m_data(static_cast<unsigned long long>(reinterpret_cast<uintptr_t>(id))) { |
| *flags |= TRACE_EVENT_FLAG_MANGLE_ID; |
| } |
| explicit TraceID(unsigned long long id, unsigned char* flags) : m_data(id) { |
| (void)flags; |
| } |
| explicit TraceID(unsigned long id, unsigned char* flags) : m_data(id) { |
| (void)flags; |
| } |
| explicit TraceID(unsigned int id, unsigned char* flags) : m_data(id) { |
| (void)flags; |
| } |
| explicit TraceID(unsigned short id, unsigned char* flags) : m_data(id) { |
| (void)flags; |
| } |
| explicit TraceID(unsigned char id, unsigned char* flags) : m_data(id) { |
| (void)flags; |
| } |
| explicit TraceID(long long id, unsigned char* flags) |
| : m_data(static_cast<unsigned long long>(id)) { |
| (void)flags; |
| } |
| explicit TraceID(long id, unsigned char* flags) |
| : m_data(static_cast<unsigned long long>(id)) { |
| (void)flags; |
| } |
| explicit TraceID(int id, unsigned char* flags) |
| : m_data(static_cast<unsigned long long>(id)) { |
| (void)flags; |
| } |
| explicit TraceID(short id, unsigned char* flags) |
| : m_data(static_cast<unsigned long long>(id)) { |
| (void)flags; |
| } |
| explicit TraceID(signed char id, unsigned char* flags) |
| : m_data(static_cast<unsigned long long>(id)) { |
| (void)flags; |
| } |
| |
| unsigned long long data() const { |
| return m_data; |
| } |
| |
| private: |
| unsigned long long m_data; |
| }; |
| |
| // Simple union to store various types as unsigned long long. |
| union TraceValueUnion { |
| bool m_bool; |
| unsigned long long m_uint; |
| long long m_int; |
| double m_double; |
| const void* m_pointer; |
| const char* m_string; |
| }; |
| |
| // Simple container for const char* that should be copied instead of retained. |
| class TraceStringWithCopy { |
| public: |
| explicit TraceStringWithCopy(const char* str) : m_str(str) { |
| } |
| operator const char*() const { |
| return m_str; |
| } |
| |
| private: |
| const char* m_str; |
| }; |
| |
| // Define setTraceValue for each allowed type. It stores the type and |
| // value in the return arguments. This allows this API to avoid declaring any |
| // structures so that it is portable to third_party libraries. |
| #define INTERNAL_DECLARE_SET_TRACE_VALUE(actual_type, union_member, value_type_id) \ |
| static inline void setTraceValue(actual_type arg, unsigned char* type, \ |
| unsigned long long* value) { \ |
| TraceValueUnion typeValue; \ |
| typeValue.union_member = arg; \ |
| *type = value_type_id; \ |
| *value = typeValue.m_uint; \ |
| } |
| // Simpler form for int types that can be safely casted. |
| #define INTERNAL_DECLARE_SET_TRACE_VALUE_INT(actual_type, value_type_id) \ |
| static inline void setTraceValue(actual_type arg, unsigned char* type, \ |
| unsigned long long* value) { \ |
| *type = value_type_id; \ |
| *value = static_cast<unsigned long long>(arg); \ |
| } |
| |
| INTERNAL_DECLARE_SET_TRACE_VALUE_INT(unsigned long long, TRACE_VALUE_TYPE_UINT) |
| INTERNAL_DECLARE_SET_TRACE_VALUE_INT(unsigned int, TRACE_VALUE_TYPE_UINT) |
| INTERNAL_DECLARE_SET_TRACE_VALUE_INT(unsigned short, TRACE_VALUE_TYPE_UINT) |
| INTERNAL_DECLARE_SET_TRACE_VALUE_INT(unsigned char, TRACE_VALUE_TYPE_UINT) |
| INTERNAL_DECLARE_SET_TRACE_VALUE_INT(long long, TRACE_VALUE_TYPE_INT) |
| INTERNAL_DECLARE_SET_TRACE_VALUE_INT(int, TRACE_VALUE_TYPE_INT) |
| INTERNAL_DECLARE_SET_TRACE_VALUE_INT(short, TRACE_VALUE_TYPE_INT) |
| INTERNAL_DECLARE_SET_TRACE_VALUE_INT(signed char, TRACE_VALUE_TYPE_INT) |
| INTERNAL_DECLARE_SET_TRACE_VALUE(bool, m_bool, TRACE_VALUE_TYPE_BOOL) |
| INTERNAL_DECLARE_SET_TRACE_VALUE(double, m_double, TRACE_VALUE_TYPE_DOUBLE) |
| INTERNAL_DECLARE_SET_TRACE_VALUE(const void*, m_pointer, TRACE_VALUE_TYPE_POINTER) |
| INTERNAL_DECLARE_SET_TRACE_VALUE(const char*, m_string, TRACE_VALUE_TYPE_STRING) |
| INTERNAL_DECLARE_SET_TRACE_VALUE(const TraceStringWithCopy&, |
| m_string, |
| TRACE_VALUE_TYPE_COPY_STRING) |
| |
| #undef INTERNAL_DECLARE_SET_TRACE_VALUE |
| #undef INTERNAL_DECLARE_SET_TRACE_VALUE_INT |
| |
| static inline void setTraceValue(const std::string& arg, |
| unsigned char* type, |
| unsigned long long* value) { |
| TraceValueUnion typeValue; |
| typeValue.m_string = arg.data(); |
| *type = TRACE_VALUE_TYPE_COPY_STRING; |
| *value = typeValue.m_uint; |
| } |
| |
| // These addTraceEvent template functions are defined here instead of in the |
| // macro, because the arg values could be temporary string objects. In order to |
| // store pointers to the internal c_str and pass through to the tracing API, the |
| // arg values must live throughout these procedures. |
| |
| static inline dawn_platform::tracing::TraceEventHandle addTraceEvent( |
| dawn_platform::Platform* platform, |
| char phase, |
| const unsigned char* categoryEnabled, |
| const char* name, |
| unsigned long long id, |
| unsigned char flags, |
| int /*unused, helps avoid empty __VA_ARGS__*/) { |
| return TRACE_EVENT_API_ADD_TRACE_EVENT(platform, phase, categoryEnabled, name, id, |
| zeroNumArgs, 0, 0, 0, flags); |
| } |
| |
| template <class ARG1_TYPE> |
| static inline dawn_platform::tracing::TraceEventHandle addTraceEvent( |
| dawn_platform::Platform* platform, |
| char phase, |
| const unsigned char* categoryEnabled, |
| const char* name, |
| unsigned long long id, |
| unsigned char flags, |
| int /*unused, helps avoid empty __VA_ARGS__*/, |
| const char* arg1Name, |
| const ARG1_TYPE& arg1Val) { |
| const int numArgs = 1; |
| unsigned char argTypes[1]; |
| uint64_t argValues[1]; |
| setTraceValue(arg1Val, &argTypes[0], &argValues[0]); |
| return TRACE_EVENT_API_ADD_TRACE_EVENT(platform, phase, categoryEnabled, name, id, |
| numArgs, &arg1Name, argTypes, argValues, flags); |
| } |
| |
| template <class ARG1_TYPE, class ARG2_TYPE> |
| static inline dawn_platform::tracing::TraceEventHandle addTraceEvent( |
| dawn_platform::Platform* platform, |
| char phase, |
| const unsigned char* categoryEnabled, |
| const char* name, |
| unsigned long long id, |
| unsigned char flags, |
| int /*unused, helps avoid empty __VA_ARGS__*/, |
| const char* arg1Name, |
| const ARG1_TYPE& arg1Val, |
| const char* arg2Name, |
| const ARG2_TYPE& arg2Val) { |
| const int numArgs = 2; |
| const char* argNames[2] = {arg1Name, arg2Name}; |
| unsigned char argTypes[2]; |
| uint64_t argValues[2]; |
| setTraceValue(arg1Val, &argTypes[0], &argValues[0]); |
| setTraceValue(arg2Val, &argTypes[1], &argValues[1]); |
| return TRACE_EVENT_API_ADD_TRACE_EVENT(platform, phase, categoryEnabled, name, id, |
| numArgs, argNames, argTypes, argValues, flags); |
| } |
| |
| // Used by TRACE_EVENTx macro. Do not use directly. |
| class TraceEndOnScopeClose { |
| public: |
| // Note: members of m_data intentionally left uninitialized. See initialize. |
| TraceEndOnScopeClose() : m_pdata(0) { |
| } |
| ~TraceEndOnScopeClose() { |
| if (m_pdata) |
| addEventIfEnabled(); |
| } |
| |
| void initialize(dawn_platform::Platform* platform, |
| const unsigned char* categoryEnabled, |
| const char* name) { |
| m_data.platform = platform; |
| m_data.categoryEnabled = categoryEnabled; |
| m_data.name = name; |
| m_pdata = &m_data; |
| } |
| |
| private: |
| // Add the end event if the category is still enabled. |
| void addEventIfEnabled() { |
| // Only called when m_pdata is non-null. |
| if (*m_pdata->categoryEnabled) { |
| TRACE_EVENT_API_ADD_TRACE_EVENT( |
| m_pdata->platform, TRACE_EVENT_PHASE_END, m_pdata->categoryEnabled, |
| m_pdata->name, noEventId, zeroNumArgs, 0, 0, 0, TRACE_EVENT_FLAG_NONE); |
| } |
| } |
| |
| // This Data struct workaround is to avoid initializing all the members |
| // in Data during construction of this object, since this object is always |
| // constructed, even when tracing is disabled. If the members of Data were |
| // members of this class instead, compiler warnings occur about potential |
| // uninitialized accesses. |
| struct Data { |
| dawn_platform::Platform* platform; |
| const unsigned char* categoryEnabled; |
| const char* name; |
| }; |
| Data* m_pdata; |
| Data m_data; |
| }; |
| |
| }} // namespace dawn_platform::TraceEvent |
| |
| #endif // DAWNPLATFORM_TRACING_TRACEEVENT_H_ |
