| // Copyright 2017 The Dawn Authors | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // http://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| #include "dawn_native/opengl/CommandBufferGL.h" | |
| #include "dawn_native/BindGroup.h" | |
| #include "dawn_native/BindGroupTracker.h" | |
| #include "dawn_native/CommandEncoder.h" | |
| #include "dawn_native/Commands.h" | |
| #include "dawn_native/RenderBundle.h" | |
| #include "dawn_native/opengl/BufferGL.h" | |
| #include "dawn_native/opengl/ComputePipelineGL.h" | |
| #include "dawn_native/opengl/DeviceGL.h" | |
| #include "dawn_native/opengl/Forward.h" | |
| #include "dawn_native/opengl/PersistentPipelineStateGL.h" | |
| #include "dawn_native/opengl/PipelineLayoutGL.h" | |
| #include "dawn_native/opengl/RenderPipelineGL.h" | |
| #include "dawn_native/opengl/SamplerGL.h" | |
| #include "dawn_native/opengl/TextureGL.h" | |
| #include "dawn_native/opengl/UtilsGL.h" | |
| #include <cstring> | |
| namespace dawn_native { namespace opengl { | |
| namespace { | |
| GLenum IndexFormatType(wgpu::IndexFormat format) { | |
| switch (format) { | |
| case wgpu::IndexFormat::Uint16: | |
| return GL_UNSIGNED_SHORT; | |
| case wgpu::IndexFormat::Uint32: | |
| return GL_UNSIGNED_INT; | |
| default: | |
| UNREACHABLE(); | |
| } | |
| } | |
| GLenum VertexFormatType(wgpu::VertexFormat format) { | |
| switch (format) { | |
| case wgpu::VertexFormat::UChar2: | |
| case wgpu::VertexFormat::UChar4: | |
| case wgpu::VertexFormat::UChar2Norm: | |
| case wgpu::VertexFormat::UChar4Norm: | |
| return GL_UNSIGNED_BYTE; | |
| case wgpu::VertexFormat::Char2: | |
| case wgpu::VertexFormat::Char4: | |
| case wgpu::VertexFormat::Char2Norm: | |
| case wgpu::VertexFormat::Char4Norm: | |
| return GL_BYTE; | |
| case wgpu::VertexFormat::UShort2: | |
| case wgpu::VertexFormat::UShort4: | |
| case wgpu::VertexFormat::UShort2Norm: | |
| case wgpu::VertexFormat::UShort4Norm: | |
| return GL_UNSIGNED_SHORT; | |
| case wgpu::VertexFormat::Short2: | |
| case wgpu::VertexFormat::Short4: | |
| case wgpu::VertexFormat::Short2Norm: | |
| case wgpu::VertexFormat::Short4Norm: | |
| return GL_SHORT; | |
| case wgpu::VertexFormat::Half2: | |
| case wgpu::VertexFormat::Half4: | |
| return GL_HALF_FLOAT; | |
| case wgpu::VertexFormat::Float: | |
| case wgpu::VertexFormat::Float2: | |
| case wgpu::VertexFormat::Float3: | |
| case wgpu::VertexFormat::Float4: | |
| return GL_FLOAT; | |
| case wgpu::VertexFormat::UInt: | |
| case wgpu::VertexFormat::UInt2: | |
| case wgpu::VertexFormat::UInt3: | |
| case wgpu::VertexFormat::UInt4: | |
| return GL_UNSIGNED_INT; | |
| case wgpu::VertexFormat::Int: | |
| case wgpu::VertexFormat::Int2: | |
| case wgpu::VertexFormat::Int3: | |
| case wgpu::VertexFormat::Int4: | |
| return GL_INT; | |
| default: | |
| UNREACHABLE(); | |
| } | |
| } | |
| GLboolean VertexFormatIsNormalized(wgpu::VertexFormat format) { | |
| switch (format) { | |
| case wgpu::VertexFormat::UChar2Norm: | |
| case wgpu::VertexFormat::UChar4Norm: | |
| case wgpu::VertexFormat::Char2Norm: | |
| case wgpu::VertexFormat::Char4Norm: | |
| case wgpu::VertexFormat::UShort2Norm: | |
| case wgpu::VertexFormat::UShort4Norm: | |
| case wgpu::VertexFormat::Short2Norm: | |
| case wgpu::VertexFormat::Short4Norm: | |
| return GL_TRUE; | |
| default: | |
| return GL_FALSE; | |
| } | |
| } | |
| bool VertexFormatIsInt(wgpu::VertexFormat format) { | |
| switch (format) { | |
| case wgpu::VertexFormat::UChar2: | |
| case wgpu::VertexFormat::UChar4: | |
| case wgpu::VertexFormat::Char2: | |
| case wgpu::VertexFormat::Char4: | |
| case wgpu::VertexFormat::UShort2: | |
| case wgpu::VertexFormat::UShort4: | |
| case wgpu::VertexFormat::Short2: | |
| case wgpu::VertexFormat::Short4: | |
| case wgpu::VertexFormat::UInt: | |
| case wgpu::VertexFormat::UInt2: | |
| case wgpu::VertexFormat::UInt3: | |
| case wgpu::VertexFormat::UInt4: | |
| case wgpu::VertexFormat::Int: | |
| case wgpu::VertexFormat::Int2: | |
| case wgpu::VertexFormat::Int3: | |
| case wgpu::VertexFormat::Int4: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| // Vertex buffers and index buffers are implemented as part of an OpenGL VAO that | |
| // corresponds to a VertexState. On the contrary in Dawn they are part of the global state. | |
| // This means that we have to re-apply these buffers on a VertexState change. | |
| class VertexStateBufferBindingTracker { | |
| public: | |
| void OnSetIndexBuffer(BufferBase* buffer) { | |
| mIndexBufferDirty = true; | |
| mIndexBuffer = ToBackend(buffer); | |
| } | |
| void OnSetVertexBuffer(uint32_t slot, BufferBase* buffer, uint64_t offset) { | |
| mVertexBuffers[slot] = ToBackend(buffer); | |
| mVertexBufferOffsets[slot] = offset; | |
| // Use 64 bit masks and make sure there are no shift UB | |
| static_assert(kMaxVertexBuffers <= 8 * sizeof(unsigned long long) - 1, ""); | |
| mDirtyVertexBuffers |= 1ull << slot; | |
| } | |
| void OnSetPipeline(RenderPipelineBase* pipeline) { | |
| if (mLastPipeline == pipeline) { | |
| return; | |
| } | |
| mIndexBufferDirty = true; | |
| mDirtyVertexBuffers |= pipeline->GetVertexBufferSlotsUsed(); | |
| mLastPipeline = pipeline; | |
| } | |
| void Apply(const OpenGLFunctions& gl) { | |
| if (mIndexBufferDirty && mIndexBuffer != nullptr) { | |
| gl.BindBuffer(GL_ELEMENT_ARRAY_BUFFER, mIndexBuffer->GetHandle()); | |
| mIndexBufferDirty = false; | |
| } | |
| for (uint32_t slot : IterateBitSet(mDirtyVertexBuffers & | |
| mLastPipeline->GetVertexBufferSlotsUsed())) { | |
| for (uint32_t location : | |
| IterateBitSet(mLastPipeline->GetAttributesUsingVertexBuffer(slot))) { | |
| const VertexAttributeInfo& attribute = | |
| mLastPipeline->GetAttribute(location); | |
| GLuint buffer = mVertexBuffers[slot]->GetHandle(); | |
| uint64_t offset = mVertexBufferOffsets[slot]; | |
| const VertexBufferInfo& vertexBuffer = mLastPipeline->GetVertexBuffer(slot); | |
| uint32_t components = VertexFormatNumComponents(attribute.format); | |
| GLenum formatType = VertexFormatType(attribute.format); | |
| GLboolean normalized = VertexFormatIsNormalized(attribute.format); | |
| gl.BindBuffer(GL_ARRAY_BUFFER, buffer); | |
| if (VertexFormatIsInt(attribute.format)) { | |
| gl.VertexAttribIPointer( | |
| location, components, formatType, vertexBuffer.arrayStride, | |
| reinterpret_cast<void*>( | |
| static_cast<intptr_t>(offset + attribute.offset))); | |
| } else { | |
| gl.VertexAttribPointer(location, components, formatType, normalized, | |
| vertexBuffer.arrayStride, | |
| reinterpret_cast<void*>(static_cast<intptr_t>( | |
| offset + attribute.offset))); | |
| } | |
| } | |
| } | |
| mDirtyVertexBuffers.reset(); | |
| } | |
| private: | |
| bool mIndexBufferDirty = false; | |
| Buffer* mIndexBuffer = nullptr; | |
| std::bitset<kMaxVertexBuffers> mDirtyVertexBuffers; | |
| std::array<Buffer*, kMaxVertexBuffers> mVertexBuffers; | |
| std::array<uint64_t, kMaxVertexBuffers> mVertexBufferOffsets; | |
| RenderPipelineBase* mLastPipeline = nullptr; | |
| }; | |
| class BindGroupTracker : public BindGroupTrackerBase<false, uint64_t> { | |
| public: | |
| void OnSetPipeline(RenderPipeline* pipeline) { | |
| BindGroupTrackerBase::OnSetPipeline(pipeline); | |
| mPipeline = pipeline; | |
| } | |
| void OnSetPipeline(ComputePipeline* pipeline) { | |
| BindGroupTrackerBase::OnSetPipeline(pipeline); | |
| mPipeline = pipeline; | |
| } | |
| void Apply(const OpenGLFunctions& gl) { | |
| for (uint32_t index : IterateBitSet(mDirtyBindGroupsObjectChangedOrIsDynamic)) { | |
| ApplyBindGroup(gl, index, mBindGroups[index], mDynamicOffsetCounts[index], | |
| mDynamicOffsets[index].data()); | |
| } | |
| DidApply(); | |
| } | |
| private: | |
| void ApplyBindGroup(const OpenGLFunctions& gl, | |
| uint32_t index, | |
| BindGroupBase* group, | |
| uint32_t dynamicOffsetCount, | |
| uint64_t* dynamicOffsets) { | |
| const auto& indices = ToBackend(mPipelineLayout)->GetBindingIndexInfo()[index]; | |
| uint32_t currentDynamicOffsetIndex = 0; | |
| for (BindingIndex bindingIndex = 0; | |
| bindingIndex < group->GetLayout()->GetBindingCount(); ++bindingIndex) { | |
| const BindingInfo& bindingInfo = | |
| group->GetLayout()->GetBindingInfo(bindingIndex); | |
| switch (bindingInfo.type) { | |
| case wgpu::BindingType::UniformBuffer: { | |
| BufferBinding binding = group->GetBindingAsBufferBinding(bindingIndex); | |
| GLuint buffer = ToBackend(binding.buffer)->GetHandle(); | |
| GLuint uboIndex = indices[bindingIndex]; | |
| GLuint offset = binding.offset; | |
| if (bindingInfo.hasDynamicOffset) { | |
| offset += dynamicOffsets[currentDynamicOffsetIndex]; | |
| ++currentDynamicOffsetIndex; | |
| } | |
| gl.BindBufferRange(GL_UNIFORM_BUFFER, uboIndex, buffer, offset, | |
| binding.size); | |
| break; | |
| } | |
| case wgpu::BindingType::StorageBuffer: | |
| case wgpu::BindingType::ReadonlyStorageBuffer: { | |
| BufferBinding binding = group->GetBindingAsBufferBinding(bindingIndex); | |
| GLuint buffer = ToBackend(binding.buffer)->GetHandle(); | |
| GLuint ssboIndex = indices[bindingIndex]; | |
| GLuint offset = binding.offset; | |
| if (bindingInfo.hasDynamicOffset) { | |
| offset += dynamicOffsets[currentDynamicOffsetIndex]; | |
| ++currentDynamicOffsetIndex; | |
| } | |
| gl.BindBufferRange(GL_SHADER_STORAGE_BUFFER, ssboIndex, buffer, offset, | |
| binding.size); | |
| break; | |
| } | |
| case wgpu::BindingType::Sampler: | |
| case wgpu::BindingType::ComparisonSampler: { | |
| Sampler* sampler = ToBackend(group->GetBindingAsSampler(bindingIndex)); | |
| GLuint samplerIndex = indices[bindingIndex]; | |
| for (PipelineGL::SamplerUnit unit : | |
| mPipeline->GetTextureUnitsForSampler(samplerIndex)) { | |
| // Only use filtering for certain texture units, because int and | |
| // uint texture are only complete without filtering | |
| if (unit.shouldUseFiltering) { | |
| gl.BindSampler(unit.unit, sampler->GetFilteringHandle()); | |
| } else { | |
| gl.BindSampler(unit.unit, sampler->GetNonFilteringHandle()); | |
| } | |
| } | |
| break; | |
| } | |
| case wgpu::BindingType::SampledTexture: { | |
| TextureView* view = | |
| ToBackend(group->GetBindingAsTextureView(bindingIndex)); | |
| GLuint handle = view->GetHandle(); | |
| GLenum target = view->GetGLTarget(); | |
| GLuint viewIndex = indices[bindingIndex]; | |
| for (auto unit : mPipeline->GetTextureUnitsForTextureView(viewIndex)) { | |
| gl.ActiveTexture(GL_TEXTURE0 + unit); | |
| gl.BindTexture(target, handle); | |
| } | |
| break; | |
| } | |
| case wgpu::BindingType::ReadonlyStorageTexture: | |
| case wgpu::BindingType::WriteonlyStorageTexture: { | |
| TextureView* view = | |
| ToBackend(group->GetBindingAsTextureView(bindingIndex)); | |
| Texture* texture = ToBackend(view->GetTexture()); | |
| GLuint handle = texture->GetHandle(); | |
| GLuint imageIndex = indices[bindingIndex]; | |
| GLenum access; | |
| switch (bindingInfo.type) { | |
| case wgpu::BindingType::ReadonlyStorageTexture: | |
| access = GL_READ_ONLY; | |
| break; | |
| case wgpu::BindingType::WriteonlyStorageTexture: | |
| access = GL_WRITE_ONLY; | |
| break; | |
| default: | |
| UNREACHABLE(); | |
| break; | |
| } | |
| // OpenGL ES only supports either binding a layer or the entire texture | |
| // in glBindImageTexture(). | |
| GLboolean isLayered; | |
| if (view->GetLayerCount() == 1) { | |
| isLayered = GL_FALSE; | |
| } else if (texture->GetArrayLayers() == view->GetLayerCount()) { | |
| isLayered = GL_TRUE; | |
| } else { | |
| UNREACHABLE(); | |
| } | |
| gl.BindImageTexture(imageIndex, handle, view->GetBaseMipLevel(), | |
| isLayered, view->GetBaseArrayLayer(), access, | |
| texture->GetGLFormat().internalFormat); | |
| break; | |
| } | |
| case wgpu::BindingType::StorageTexture: | |
| UNREACHABLE(); | |
| break; | |
| // TODO(shaobo.yan@intel.com): Implement dynamic buffer offset. | |
| } | |
| } | |
| } | |
| PipelineGL* mPipeline = nullptr; | |
| }; | |
| void ResolveMultisampledRenderTargets(const OpenGLFunctions& gl, | |
| const BeginRenderPassCmd* renderPass) { | |
| ASSERT(renderPass != nullptr); | |
| GLuint readFbo = 0; | |
| GLuint writeFbo = 0; | |
| for (uint32_t i : | |
| IterateBitSet(renderPass->attachmentState->GetColorAttachmentsMask())) { | |
| if (renderPass->colorAttachments[i].resolveTarget.Get() != nullptr) { | |
| if (readFbo == 0) { | |
| ASSERT(writeFbo == 0); | |
| gl.GenFramebuffers(1, &readFbo); | |
| gl.GenFramebuffers(1, &writeFbo); | |
| } | |
| const TextureBase* colorTexture = | |
| renderPass->colorAttachments[i].view->GetTexture(); | |
| ASSERT(colorTexture->IsMultisampledTexture()); | |
| ASSERT(colorTexture->GetArrayLayers() == 1); | |
| ASSERT(renderPass->colorAttachments[i].view->GetBaseMipLevel() == 0); | |
| GLuint colorHandle = ToBackend(colorTexture)->GetHandle(); | |
| gl.BindFramebuffer(GL_READ_FRAMEBUFFER, readFbo); | |
| gl.FramebufferTexture2D(GL_READ_FRAMEBUFFER, GL_COLOR_ATTACHMENT0, | |
| ToBackend(colorTexture)->GetGLTarget(), colorHandle, 0); | |
| const TextureBase* resolveTexture = | |
| renderPass->colorAttachments[i].resolveTarget->GetTexture(); | |
| GLuint resolveTextureHandle = ToBackend(resolveTexture)->GetHandle(); | |
| GLuint resolveTargetMipmapLevel = | |
| renderPass->colorAttachments[i].resolveTarget->GetBaseMipLevel(); | |
| gl.BindFramebuffer(GL_DRAW_FRAMEBUFFER, writeFbo); | |
| if (resolveTexture->GetArrayLayers() == 1) { | |
| gl.FramebufferTexture2D(GL_DRAW_FRAMEBUFFER, GL_COLOR_ATTACHMENT0, | |
| GL_TEXTURE_2D, resolveTextureHandle, | |
| resolveTargetMipmapLevel); | |
| } else { | |
| GLuint resolveTargetArrayLayer = | |
| renderPass->colorAttachments[i].resolveTarget->GetBaseArrayLayer(); | |
| gl.FramebufferTextureLayer(GL_DRAW_FRAMEBUFFER, GL_COLOR_ATTACHMENT0, | |
| resolveTextureHandle, resolveTargetMipmapLevel, | |
| resolveTargetArrayLayer); | |
| } | |
| gl.BlitFramebuffer(0, 0, renderPass->width, renderPass->height, 0, 0, | |
| renderPass->width, renderPass->height, GL_COLOR_BUFFER_BIT, | |
| GL_NEAREST); | |
| } | |
| } | |
| gl.DeleteFramebuffers(1, &readFbo); | |
| gl.DeleteFramebuffers(1, &writeFbo); | |
| } | |
| // OpenGL SPEC requires the source/destination region must be a region that is contained | |
| // within srcImage/dstImage. Here the size of the image refers to the virtual size, while | |
| // Dawn validates texture copy extent with the physical size, so we need to re-calculate the | |
| // texture copy extent to ensure it should fit in the virtual size of the subresource. | |
| Extent3D ComputeTextureCopyExtent(const TextureCopy& textureCopy, | |
| const Extent3D& copySize) { | |
| Extent3D validTextureCopyExtent = copySize; | |
| const TextureBase* texture = textureCopy.texture.Get(); | |
| Extent3D virtualSizeAtLevel = texture->GetMipLevelVirtualSize(textureCopy.mipLevel); | |
| if (textureCopy.origin.x + copySize.width > virtualSizeAtLevel.width) { | |
| ASSERT(texture->GetFormat().isCompressed); | |
| validTextureCopyExtent.width = virtualSizeAtLevel.width - textureCopy.origin.x; | |
| } | |
| if (textureCopy.origin.y + copySize.height > virtualSizeAtLevel.height) { | |
| ASSERT(texture->GetFormat().isCompressed); | |
| validTextureCopyExtent.height = virtualSizeAtLevel.height - textureCopy.origin.y; | |
| } | |
| return validTextureCopyExtent; | |
| } | |
| } // namespace | |
| CommandBuffer::CommandBuffer(CommandEncoder* encoder, const CommandBufferDescriptor* descriptor) | |
| : CommandBufferBase(encoder, descriptor), mCommands(encoder->AcquireCommands()) { | |
| } | |
| CommandBuffer::~CommandBuffer() { | |
| FreeCommands(&mCommands); | |
| } | |
| void CommandBuffer::Execute() { | |
| const OpenGLFunctions& gl = ToBackend(GetDevice())->gl; | |
| auto TransitionForPass = [](const PassResourceUsage& usages) { | |
| for (size_t i = 0; i < usages.textures.size(); i++) { | |
| Texture* texture = ToBackend(usages.textures[i]); | |
| // Clear textures that are not output attachments. Output attachments will be | |
| // cleared in BeginRenderPass by setting the loadop to clear when the | |
| // texture subresource has not been initialized before the render pass. | |
| if (!(usages.textureUsages[i].usage & wgpu::TextureUsage::OutputAttachment)) { | |
| texture->EnsureSubresourceContentInitialized(texture->GetAllSubresources()); | |
| } | |
| } | |
| }; | |
| const std::vector<PassResourceUsage>& passResourceUsages = GetResourceUsages().perPass; | |
| uint32_t nextPassNumber = 0; | |
| Command type; | |
| while (mCommands.NextCommandId(&type)) { | |
| switch (type) { | |
| case Command::BeginComputePass: { | |
| mCommands.NextCommand<BeginComputePassCmd>(); | |
| TransitionForPass(passResourceUsages[nextPassNumber]); | |
| ExecuteComputePass(); | |
| nextPassNumber++; | |
| break; | |
| } | |
| case Command::BeginRenderPass: { | |
| auto* cmd = mCommands.NextCommand<BeginRenderPassCmd>(); | |
| TransitionForPass(passResourceUsages[nextPassNumber]); | |
| LazyClearRenderPassAttachments(cmd); | |
| ExecuteRenderPass(cmd); | |
| nextPassNumber++; | |
| break; | |
| } | |
| case Command::CopyBufferToBuffer: { | |
| CopyBufferToBufferCmd* copy = mCommands.NextCommand<CopyBufferToBufferCmd>(); | |
| gl.BindBuffer(GL_PIXEL_PACK_BUFFER, ToBackend(copy->source)->GetHandle()); | |
| gl.BindBuffer(GL_PIXEL_UNPACK_BUFFER, | |
| ToBackend(copy->destination)->GetHandle()); | |
| gl.CopyBufferSubData(GL_PIXEL_PACK_BUFFER, GL_PIXEL_UNPACK_BUFFER, | |
| copy->sourceOffset, copy->destinationOffset, copy->size); | |
| gl.BindBuffer(GL_PIXEL_PACK_BUFFER, 0); | |
| gl.BindBuffer(GL_PIXEL_UNPACK_BUFFER, 0); | |
| break; | |
| } | |
| case Command::CopyBufferToTexture: { | |
| CopyBufferToTextureCmd* copy = mCommands.NextCommand<CopyBufferToTextureCmd>(); | |
| auto& src = copy->source; | |
| auto& dst = copy->destination; | |
| auto& copySize = copy->copySize; | |
| Buffer* buffer = ToBackend(src.buffer.Get()); | |
| Texture* texture = ToBackend(dst.texture.Get()); | |
| GLenum target = texture->GetGLTarget(); | |
| const GLFormat& format = texture->GetGLFormat(); | |
| ASSERT(texture->GetDimension() == wgpu::TextureDimension::e2D); | |
| ASSERT(copy->copySize.depth == 1); | |
| SubresourceRange subresource = | |
| SubresourceRange::SingleSubresource(dst.mipLevel, dst.arrayLayer); | |
| if (IsCompleteSubresourceCopiedTo(texture, copySize, dst.mipLevel)) { | |
| texture->SetIsSubresourceContentInitialized(true, subresource); | |
| } else { | |
| texture->EnsureSubresourceContentInitialized(subresource); | |
| } | |
| gl.BindBuffer(GL_PIXEL_UNPACK_BUFFER, buffer->GetHandle()); | |
| gl.ActiveTexture(GL_TEXTURE0); | |
| gl.BindTexture(target, texture->GetHandle()); | |
| const Format& formatInfo = texture->GetFormat(); | |
| gl.PixelStorei( | |
| GL_UNPACK_ROW_LENGTH, | |
| src.bytesPerRow / formatInfo.blockByteSize * formatInfo.blockWidth); | |
| gl.PixelStorei(GL_UNPACK_IMAGE_HEIGHT, src.rowsPerImage); | |
| if (formatInfo.isCompressed) { | |
| gl.PixelStorei(GL_UNPACK_COMPRESSED_BLOCK_SIZE, formatInfo.blockByteSize); | |
| gl.PixelStorei(GL_UNPACK_COMPRESSED_BLOCK_WIDTH, formatInfo.blockWidth); | |
| gl.PixelStorei(GL_UNPACK_COMPRESSED_BLOCK_HEIGHT, formatInfo.blockHeight); | |
| gl.PixelStorei(GL_UNPACK_COMPRESSED_BLOCK_DEPTH, 1); | |
| ASSERT(texture->GetDimension() == wgpu::TextureDimension::e2D); | |
| uint64_t copyDataSize = (copySize.width / formatInfo.blockWidth) * | |
| (copySize.height / formatInfo.blockHeight) * | |
| formatInfo.blockByteSize; | |
| Extent3D copyExtent = ComputeTextureCopyExtent(dst, copySize); | |
| if (texture->GetArrayLayers() > 1) { | |
| gl.CompressedTexSubImage3D( | |
| target, dst.mipLevel, dst.origin.x, dst.origin.y, dst.arrayLayer, | |
| copyExtent.width, copyExtent.height, 1, format.internalFormat, | |
| copyDataSize, | |
| reinterpret_cast<void*>(static_cast<uintptr_t>(src.offset))); | |
| } else { | |
| gl.CompressedTexSubImage2D( | |
| target, dst.mipLevel, dst.origin.x, dst.origin.y, copyExtent.width, | |
| copyExtent.height, format.internalFormat, copyDataSize, | |
| reinterpret_cast<void*>(static_cast<uintptr_t>(src.offset))); | |
| } | |
| } else { | |
| switch (texture->GetDimension()) { | |
| case wgpu::TextureDimension::e2D: | |
| if (texture->GetArrayLayers() > 1) { | |
| gl.TexSubImage3D(target, dst.mipLevel, dst.origin.x, | |
| dst.origin.y, dst.arrayLayer, copySize.width, | |
| copySize.height, 1, format.format, format.type, | |
| reinterpret_cast<void*>( | |
| static_cast<uintptr_t>(src.offset))); | |
| } else { | |
| gl.TexSubImage2D(target, dst.mipLevel, dst.origin.x, | |
| dst.origin.y, copySize.width, copySize.height, | |
| format.format, format.type, | |
| reinterpret_cast<void*>( | |
| static_cast<uintptr_t>(src.offset))); | |
| } | |
| break; | |
| default: | |
| UNREACHABLE(); | |
| } | |
| } | |
| gl.PixelStorei(GL_UNPACK_ROW_LENGTH, 0); | |
| gl.PixelStorei(GL_UNPACK_IMAGE_HEIGHT, 0); | |
| gl.BindBuffer(GL_PIXEL_UNPACK_BUFFER, 0); | |
| break; | |
| } | |
| case Command::CopyTextureToBuffer: { | |
| CopyTextureToBufferCmd* copy = mCommands.NextCommand<CopyTextureToBufferCmd>(); | |
| auto& src = copy->source; | |
| auto& dst = copy->destination; | |
| auto& copySize = copy->copySize; | |
| Texture* texture = ToBackend(src.texture.Get()); | |
| Buffer* buffer = ToBackend(dst.buffer.Get()); | |
| const Format& format = texture->GetFormat(); | |
| const GLFormat& glFormat = texture->GetGLFormat(); | |
| GLenum target = texture->GetGLTarget(); | |
| // TODO(jiawei.shao@intel.com): support texture-to-buffer copy with compressed | |
| // texture formats. | |
| if (format.isCompressed) { | |
| UNREACHABLE(); | |
| } | |
| ASSERT(texture->GetDimension() == wgpu::TextureDimension::e2D); | |
| ASSERT(copy->copySize.depth == 1); | |
| texture->EnsureSubresourceContentInitialized( | |
| SubresourceRange::SingleSubresource(src.mipLevel, src.arrayLayer)); | |
| // The only way to move data from a texture to a buffer in GL is via | |
| // glReadPixels with a pack buffer. Create a temporary FBO for the copy. | |
| gl.BindTexture(target, texture->GetHandle()); | |
| GLuint readFBO = 0; | |
| gl.GenFramebuffers(1, &readFBO); | |
| gl.BindFramebuffer(GL_READ_FRAMEBUFFER, readFBO); | |
| GLenum glAttachment = 0; | |
| switch (format.aspect) { | |
| case Format::Aspect::Color: | |
| glAttachment = GL_COLOR_ATTACHMENT0; | |
| break; | |
| case Format::Aspect::Depth: | |
| glAttachment = GL_DEPTH_ATTACHMENT; | |
| break; | |
| case Format::Aspect::Stencil: | |
| glAttachment = GL_STENCIL_ATTACHMENT; | |
| break; | |
| case Format::Aspect::DepthStencil: | |
| glAttachment = GL_DEPTH_STENCIL_ATTACHMENT; | |
| break; | |
| default: | |
| UNREACHABLE(); | |
| break; | |
| } | |
| switch (texture->GetDimension()) { | |
| case wgpu::TextureDimension::e2D: | |
| if (texture->GetArrayLayers() > 1) { | |
| gl.FramebufferTextureLayer(GL_READ_FRAMEBUFFER, glAttachment, | |
| texture->GetHandle(), src.mipLevel, | |
| src.arrayLayer); | |
| } else { | |
| gl.FramebufferTexture2D(GL_READ_FRAMEBUFFER, glAttachment, target, | |
| texture->GetHandle(), src.mipLevel); | |
| } | |
| break; | |
| default: | |
| UNREACHABLE(); | |
| } | |
| gl.BindBuffer(GL_PIXEL_PACK_BUFFER, buffer->GetHandle()); | |
| gl.PixelStorei(GL_PACK_ROW_LENGTH, dst.bytesPerRow / format.blockByteSize); | |
| gl.PixelStorei(GL_PACK_IMAGE_HEIGHT, dst.rowsPerImage); | |
| ASSERT(copySize.depth == 1 && src.origin.z == 0); | |
| void* offset = reinterpret_cast<void*>(static_cast<uintptr_t>(dst.offset)); | |
| gl.ReadPixels(src.origin.x, src.origin.y, copySize.width, copySize.height, | |
| glFormat.format, glFormat.type, offset); | |
| gl.PixelStorei(GL_PACK_ROW_LENGTH, 0); | |
| gl.PixelStorei(GL_PACK_IMAGE_HEIGHT, 0); | |
| gl.BindBuffer(GL_PIXEL_PACK_BUFFER, 0); | |
| gl.DeleteFramebuffers(1, &readFBO); | |
| break; | |
| } | |
| case Command::CopyTextureToTexture: { | |
| CopyTextureToTextureCmd* copy = | |
| mCommands.NextCommand<CopyTextureToTextureCmd>(); | |
| auto& src = copy->source; | |
| auto& dst = copy->destination; | |
| // TODO(jiawei.shao@intel.com): add workaround for the case that imageExtentSrc | |
| // is not equal to imageExtentDst. For example when copySize fits in the virtual | |
| // size of the source image but does not fit in the one of the destination | |
| // image. | |
| Extent3D copySize = ComputeTextureCopyExtent(dst, copy->copySize); | |
| Texture* srcTexture = ToBackend(src.texture.Get()); | |
| Texture* dstTexture = ToBackend(dst.texture.Get()); | |
| SubresourceRange srcRange = {src.mipLevel, 1, src.arrayLayer, | |
| copy->copySize.depth}; | |
| SubresourceRange dstRange = {dst.mipLevel, 1, dst.arrayLayer, | |
| copy->copySize.depth}; | |
| srcTexture->EnsureSubresourceContentInitialized(srcRange); | |
| if (IsCompleteSubresourceCopiedTo(dstTexture, copySize, dst.mipLevel)) { | |
| dstTexture->SetIsSubresourceContentInitialized(true, dstRange); | |
| } else { | |
| dstTexture->EnsureSubresourceContentInitialized(dstRange); | |
| } | |
| gl.CopyImageSubData(srcTexture->GetHandle(), srcTexture->GetGLTarget(), | |
| src.mipLevel, src.origin.x, src.origin.y, src.arrayLayer, | |
| dstTexture->GetHandle(), dstTexture->GetGLTarget(), | |
| dst.mipLevel, dst.origin.x, dst.origin.y, dst.arrayLayer, | |
| copySize.width, copySize.height, copy->copySize.depth); | |
| break; | |
| } | |
| default: { | |
| UNREACHABLE(); | |
| break; | |
| } | |
| } | |
| } | |
| } | |
| void CommandBuffer::ExecuteComputePass() { | |
| const OpenGLFunctions& gl = ToBackend(GetDevice())->gl; | |
| ComputePipeline* lastPipeline = nullptr; | |
| BindGroupTracker bindGroupTracker = {}; | |
| Command type; | |
| while (mCommands.NextCommandId(&type)) { | |
| switch (type) { | |
| case Command::EndComputePass: { | |
| mCommands.NextCommand<EndComputePassCmd>(); | |
| return; | |
| } | |
| case Command::Dispatch: { | |
| DispatchCmd* dispatch = mCommands.NextCommand<DispatchCmd>(); | |
| bindGroupTracker.Apply(gl); | |
| gl.DispatchCompute(dispatch->x, dispatch->y, dispatch->z); | |
| // TODO(cwallez@chromium.org): add barriers to the API | |
| gl.MemoryBarrier(GL_ALL_BARRIER_BITS); | |
| break; | |
| } | |
| case Command::DispatchIndirect: { | |
| DispatchIndirectCmd* dispatch = mCommands.NextCommand<DispatchIndirectCmd>(); | |
| bindGroupTracker.Apply(gl); | |
| uint64_t indirectBufferOffset = dispatch->indirectOffset; | |
| Buffer* indirectBuffer = ToBackend(dispatch->indirectBuffer.Get()); | |
| gl.BindBuffer(GL_DISPATCH_INDIRECT_BUFFER, indirectBuffer->GetHandle()); | |
| gl.DispatchComputeIndirect(static_cast<GLintptr>(indirectBufferOffset)); | |
| // TODO(cwallez@chromium.org): add barriers to the API | |
| gl.MemoryBarrier(GL_ALL_BARRIER_BITS); | |
| break; | |
| } | |
| case Command::SetComputePipeline: { | |
| SetComputePipelineCmd* cmd = mCommands.NextCommand<SetComputePipelineCmd>(); | |
| lastPipeline = ToBackend(cmd->pipeline).Get(); | |
| lastPipeline->ApplyNow(); | |
| bindGroupTracker.OnSetPipeline(lastPipeline); | |
| break; | |
| } | |
| case Command::SetBindGroup: { | |
| SetBindGroupCmd* cmd = mCommands.NextCommand<SetBindGroupCmd>(); | |
| uint32_t* dynamicOffsets = nullptr; | |
| if (cmd->dynamicOffsetCount > 0) { | |
| dynamicOffsets = mCommands.NextData<uint32_t>(cmd->dynamicOffsetCount); | |
| } | |
| bindGroupTracker.OnSetBindGroup(cmd->index, cmd->group.Get(), | |
| cmd->dynamicOffsetCount, dynamicOffsets); | |
| break; | |
| } | |
| case Command::InsertDebugMarker: | |
| case Command::PopDebugGroup: | |
| case Command::PushDebugGroup: { | |
| // Due to lack of linux driver support for GL_EXT_debug_marker | |
| // extension these functions are skipped. | |
| SkipCommand(&mCommands, type); | |
| break; | |
| } | |
| default: { | |
| UNREACHABLE(); | |
| break; | |
| } | |
| } | |
| } | |
| // EndComputePass should have been called | |
| UNREACHABLE(); | |
| } | |
| void CommandBuffer::ExecuteRenderPass(BeginRenderPassCmd* renderPass) { | |
| const OpenGLFunctions& gl = ToBackend(GetDevice())->gl; | |
| GLuint fbo = 0; | |
| // Create the framebuffer used for this render pass and calls the correct glDrawBuffers | |
| { | |
| // TODO(kainino@chromium.org): This is added to possibly work around an issue seen on | |
| // Windows/Intel. It should break any feedback loop before the clears, even if there | |
| // shouldn't be any negative effects from this. Investigate whether it's actually | |
| // needed. | |
| gl.BindFramebuffer(GL_READ_FRAMEBUFFER, 0); | |
| // TODO(kainino@chromium.org): possible future optimization: create these framebuffers | |
| // at Framebuffer build time (or maybe CommandBuffer build time) so they don't have to | |
| // be created and destroyed at draw time. | |
| gl.GenFramebuffers(1, &fbo); | |
| gl.BindFramebuffer(GL_DRAW_FRAMEBUFFER, fbo); | |
| // Mapping from attachmentSlot to GL framebuffer attachment points. Defaults to zero | |
| // (GL_NONE). | |
| std::array<GLenum, kMaxColorAttachments> drawBuffers = {}; | |
| // Construct GL framebuffer | |
| unsigned int attachmentCount = 0; | |
| for (uint32_t i : | |
| IterateBitSet(renderPass->attachmentState->GetColorAttachmentsMask())) { | |
| TextureViewBase* textureView = renderPass->colorAttachments[i].view.Get(); | |
| GLuint texture = ToBackend(textureView->GetTexture())->GetHandle(); | |
| // Attach color buffers. | |
| if (textureView->GetTexture()->GetArrayLayers() == 1) { | |
| GLenum target = ToBackend(textureView->GetTexture())->GetGLTarget(); | |
| gl.FramebufferTexture2D(GL_DRAW_FRAMEBUFFER, GL_COLOR_ATTACHMENT0 + i, target, | |
| texture, textureView->GetBaseMipLevel()); | |
| } else { | |
| gl.FramebufferTextureLayer(GL_DRAW_FRAMEBUFFER, GL_COLOR_ATTACHMENT0 + i, | |
| texture, textureView->GetBaseMipLevel(), | |
| textureView->GetBaseArrayLayer()); | |
| } | |
| drawBuffers[i] = GL_COLOR_ATTACHMENT0 + i; | |
| attachmentCount = i + 1; | |
| } | |
| gl.DrawBuffers(attachmentCount, drawBuffers.data()); | |
| if (renderPass->attachmentState->HasDepthStencilAttachment()) { | |
| TextureViewBase* textureView = renderPass->depthStencilAttachment.view.Get(); | |
| GLuint texture = ToBackend(textureView->GetTexture())->GetHandle(); | |
| const Format& format = textureView->GetTexture()->GetFormat(); | |
| // Attach depth/stencil buffer. | |
| GLenum glAttachment = 0; | |
| // TODO(kainino@chromium.org): it may be valid to just always use | |
| // GL_DEPTH_STENCIL_ATTACHMENT here. | |
| switch (format.aspect) { | |
| case Format::Aspect::Depth: | |
| glAttachment = GL_DEPTH_ATTACHMENT; | |
| break; | |
| case Format::Aspect::Stencil: | |
| glAttachment = GL_STENCIL_ATTACHMENT; | |
| break; | |
| case Format::Aspect::DepthStencil: | |
| glAttachment = GL_DEPTH_STENCIL_ATTACHMENT; | |
| break; | |
| default: | |
| UNREACHABLE(); | |
| break; | |
| } | |
| if (textureView->GetTexture()->GetArrayLayers() == 1) { | |
| GLenum target = ToBackend(textureView->GetTexture())->GetGLTarget(); | |
| gl.FramebufferTexture2D(GL_DRAW_FRAMEBUFFER, glAttachment, target, texture, | |
| textureView->GetBaseMipLevel()); | |
| } else { | |
| gl.FramebufferTextureLayer(GL_DRAW_FRAMEBUFFER, glAttachment, texture, | |
| textureView->GetBaseMipLevel(), | |
| textureView->GetBaseArrayLayer()); | |
| } | |
| } | |
| } | |
| ASSERT(gl.CheckFramebufferStatus(GL_DRAW_FRAMEBUFFER) == GL_FRAMEBUFFER_COMPLETE); | |
| // Set defaults for dynamic state before executing clears and commands. | |
| PersistentPipelineState persistentPipelineState; | |
| persistentPipelineState.SetDefaultState(gl); | |
| gl.BlendColor(0, 0, 0, 0); | |
| gl.Viewport(0, 0, renderPass->width, renderPass->height); | |
| gl.DepthRangef(0.0, 1.0); | |
| gl.Scissor(0, 0, renderPass->width, renderPass->height); | |
| // Clear framebuffer attachments as needed | |
| { | |
| for (uint32_t i : | |
| IterateBitSet(renderPass->attachmentState->GetColorAttachmentsMask())) { | |
| auto* attachmentInfo = &renderPass->colorAttachments[i]; | |
| // Load op - color | |
| // TODO(cwallez@chromium.org): Choose the clear function depending on the | |
| // componentType: things work for now because the clear color is always a float, but | |
| // when that's fixed will lose precision on integer formats when converting to | |
| // float. | |
| if (attachmentInfo->loadOp == wgpu::LoadOp::Clear) { | |
| gl.ColorMaski(i, true, true, true, true); | |
| gl.ClearBufferfv(GL_COLOR, i, &attachmentInfo->clearColor.r); | |
| } | |
| if (attachmentInfo->storeOp == wgpu::StoreOp::Clear) { | |
| // TODO(natlee@microsoft.com): call glDiscard to do optimization | |
| } | |
| } | |
| if (renderPass->attachmentState->HasDepthStencilAttachment()) { | |
| auto* attachmentInfo = &renderPass->depthStencilAttachment; | |
| const Format& attachmentFormat = attachmentInfo->view->GetTexture()->GetFormat(); | |
| // Load op - depth/stencil | |
| bool doDepthClear = attachmentFormat.HasDepth() && | |
| (attachmentInfo->depthLoadOp == wgpu::LoadOp::Clear); | |
| bool doStencilClear = attachmentFormat.HasStencil() && | |
| (attachmentInfo->stencilLoadOp == wgpu::LoadOp::Clear); | |
| if (doDepthClear) { | |
| gl.DepthMask(GL_TRUE); | |
| } | |
| if (doStencilClear) { | |
| gl.StencilMask(GetStencilMaskFromStencilFormat(attachmentFormat.format)); | |
| } | |
| if (doDepthClear && doStencilClear) { | |
| gl.ClearBufferfi(GL_DEPTH_STENCIL, 0, attachmentInfo->clearDepth, | |
| attachmentInfo->clearStencil); | |
| } else if (doDepthClear) { | |
| gl.ClearBufferfv(GL_DEPTH, 0, &attachmentInfo->clearDepth); | |
| } else if (doStencilClear) { | |
| const GLint clearStencil = attachmentInfo->clearStencil; | |
| gl.ClearBufferiv(GL_STENCIL, 0, &clearStencil); | |
| } | |
| } | |
| } | |
| RenderPipeline* lastPipeline = nullptr; | |
| uint64_t indexBufferBaseOffset = 0; | |
| VertexStateBufferBindingTracker vertexStateBufferBindingTracker; | |
| BindGroupTracker bindGroupTracker = {}; | |
| auto DoRenderBundleCommand = [&](CommandIterator* iter, Command type) { | |
| switch (type) { | |
| case Command::Draw: { | |
| DrawCmd* draw = iter->NextCommand<DrawCmd>(); | |
| vertexStateBufferBindingTracker.Apply(gl); | |
| bindGroupTracker.Apply(gl); | |
| if (draw->firstInstance > 0) { | |
| gl.DrawArraysInstancedBaseInstance( | |
| lastPipeline->GetGLPrimitiveTopology(), draw->firstVertex, | |
| draw->vertexCount, draw->instanceCount, draw->firstInstance); | |
| } else { | |
| // This branch is only needed on OpenGL < 4.2 | |
| gl.DrawArraysInstanced(lastPipeline->GetGLPrimitiveTopology(), | |
| draw->firstVertex, draw->vertexCount, | |
| draw->instanceCount); | |
| } | |
| break; | |
| } | |
| case Command::DrawIndexed: { | |
| DrawIndexedCmd* draw = iter->NextCommand<DrawIndexedCmd>(); | |
| vertexStateBufferBindingTracker.Apply(gl); | |
| bindGroupTracker.Apply(gl); | |
| wgpu::IndexFormat indexFormat = | |
| lastPipeline->GetVertexStateDescriptor()->indexFormat; | |
| size_t formatSize = IndexFormatSize(indexFormat); | |
| GLenum formatType = IndexFormatType(indexFormat); | |
| if (draw->firstInstance > 0) { | |
| gl.DrawElementsInstancedBaseVertexBaseInstance( | |
| lastPipeline->GetGLPrimitiveTopology(), draw->indexCount, formatType, | |
| reinterpret_cast<void*>(draw->firstIndex * formatSize + | |
| indexBufferBaseOffset), | |
| draw->instanceCount, draw->baseVertex, draw->firstInstance); | |
| } else { | |
| // This branch is only needed on OpenGL < 4.2; ES < 3.2 | |
| if (draw->baseVertex != 0) { | |
| gl.DrawElementsInstancedBaseVertex( | |
| lastPipeline->GetGLPrimitiveTopology(), draw->indexCount, | |
| formatType, | |
| reinterpret_cast<void*>(draw->firstIndex * formatSize + | |
| indexBufferBaseOffset), | |
| draw->instanceCount, draw->baseVertex); | |
| } else { | |
| // This branch is only needed on OpenGL < 3.2; ES < 3.2 | |
| gl.DrawElementsInstanced( | |
| lastPipeline->GetGLPrimitiveTopology(), draw->indexCount, | |
| formatType, | |
| reinterpret_cast<void*>(draw->firstIndex * formatSize + | |
| indexBufferBaseOffset), | |
| draw->instanceCount); | |
| } | |
| } | |
| break; | |
| } | |
| case Command::DrawIndirect: { | |
| DrawIndirectCmd* draw = iter->NextCommand<DrawIndirectCmd>(); | |
| vertexStateBufferBindingTracker.Apply(gl); | |
| bindGroupTracker.Apply(gl); | |
| uint64_t indirectBufferOffset = draw->indirectOffset; | |
| Buffer* indirectBuffer = ToBackend(draw->indirectBuffer.Get()); | |
| gl.BindBuffer(GL_DRAW_INDIRECT_BUFFER, indirectBuffer->GetHandle()); | |
| gl.DrawArraysIndirect( | |
| lastPipeline->GetGLPrimitiveTopology(), | |
| reinterpret_cast<void*>(static_cast<intptr_t>(indirectBufferOffset))); | |
| break; | |
| } | |
| case Command::DrawIndexedIndirect: { | |
| DrawIndexedIndirectCmd* draw = iter->NextCommand<DrawIndexedIndirectCmd>(); | |
| vertexStateBufferBindingTracker.Apply(gl); | |
| bindGroupTracker.Apply(gl); | |
| wgpu::IndexFormat indexFormat = | |
| lastPipeline->GetVertexStateDescriptor()->indexFormat; | |
| GLenum formatType = IndexFormatType(indexFormat); | |
| uint64_t indirectBufferOffset = draw->indirectOffset; | |
| Buffer* indirectBuffer = ToBackend(draw->indirectBuffer.Get()); | |
| gl.BindBuffer(GL_DRAW_INDIRECT_BUFFER, indirectBuffer->GetHandle()); | |
| gl.DrawElementsIndirect( | |
| lastPipeline->GetGLPrimitiveTopology(), formatType, | |
| reinterpret_cast<void*>(static_cast<intptr_t>(indirectBufferOffset))); | |
| break; | |
| } | |
| case Command::InsertDebugMarker: | |
| case Command::PopDebugGroup: | |
| case Command::PushDebugGroup: { | |
| // Due to lack of linux driver support for GL_EXT_debug_marker | |
| // extension these functions are skipped. | |
| SkipCommand(iter, type); | |
| break; | |
| } | |
| case Command::SetRenderPipeline: { | |
| SetRenderPipelineCmd* cmd = iter->NextCommand<SetRenderPipelineCmd>(); | |
| lastPipeline = ToBackend(cmd->pipeline).Get(); | |
| lastPipeline->ApplyNow(persistentPipelineState); | |
| vertexStateBufferBindingTracker.OnSetPipeline(lastPipeline); | |
| bindGroupTracker.OnSetPipeline(lastPipeline); | |
| break; | |
| } | |
| case Command::SetBindGroup: { | |
| SetBindGroupCmd* cmd = iter->NextCommand<SetBindGroupCmd>(); | |
| uint32_t* dynamicOffsets = nullptr; | |
| if (cmd->dynamicOffsetCount > 0) { | |
| dynamicOffsets = iter->NextData<uint32_t>(cmd->dynamicOffsetCount); | |
| } | |
| bindGroupTracker.OnSetBindGroup(cmd->index, cmd->group.Get(), | |
| cmd->dynamicOffsetCount, dynamicOffsets); | |
| break; | |
| } | |
| case Command::SetIndexBuffer: { | |
| SetIndexBufferCmd* cmd = iter->NextCommand<SetIndexBufferCmd>(); | |
| indexBufferBaseOffset = cmd->offset; | |
| vertexStateBufferBindingTracker.OnSetIndexBuffer(cmd->buffer.Get()); | |
| break; | |
| } | |
| case Command::SetVertexBuffer: { | |
| SetVertexBufferCmd* cmd = iter->NextCommand<SetVertexBufferCmd>(); | |
| vertexStateBufferBindingTracker.OnSetVertexBuffer(cmd->slot, cmd->buffer.Get(), | |
| cmd->offset); | |
| break; | |
| } | |
| default: | |
| UNREACHABLE(); | |
| break; | |
| } | |
| }; | |
| Command type; | |
| while (mCommands.NextCommandId(&type)) { | |
| switch (type) { | |
| case Command::EndRenderPass: { | |
| mCommands.NextCommand<EndRenderPassCmd>(); | |
| if (renderPass->attachmentState->GetSampleCount() > 1) { | |
| ResolveMultisampledRenderTargets(gl, renderPass); | |
| } | |
| gl.DeleteFramebuffers(1, &fbo); | |
| return; | |
| } | |
| case Command::SetStencilReference: { | |
| SetStencilReferenceCmd* cmd = mCommands.NextCommand<SetStencilReferenceCmd>(); | |
| persistentPipelineState.SetStencilReference(gl, cmd->reference); | |
| break; | |
| } | |
| case Command::SetViewport: { | |
| SetViewportCmd* cmd = mCommands.NextCommand<SetViewportCmd>(); | |
| gl.ViewportIndexedf(0, cmd->x, cmd->y, cmd->width, cmd->height); | |
| gl.DepthRangef(cmd->minDepth, cmd->maxDepth); | |
| break; | |
| } | |
| case Command::SetScissorRect: { | |
| SetScissorRectCmd* cmd = mCommands.NextCommand<SetScissorRectCmd>(); | |
| gl.Scissor(cmd->x, cmd->y, cmd->width, cmd->height); | |
| break; | |
| } | |
| case Command::SetBlendColor: { | |
| SetBlendColorCmd* cmd = mCommands.NextCommand<SetBlendColorCmd>(); | |
| gl.BlendColor(cmd->color.r, cmd->color.g, cmd->color.b, cmd->color.a); | |
| break; | |
| } | |
| case Command::ExecuteBundles: { | |
| ExecuteBundlesCmd* cmd = mCommands.NextCommand<ExecuteBundlesCmd>(); | |
| auto bundles = mCommands.NextData<Ref<RenderBundleBase>>(cmd->count); | |
| for (uint32_t i = 0; i < cmd->count; ++i) { | |
| CommandIterator* iter = bundles[i]->GetCommands(); | |
| iter->Reset(); | |
| while (iter->NextCommandId(&type)) { | |
| DoRenderBundleCommand(iter, type); | |
| } | |
| } | |
| break; | |
| } | |
| default: { | |
| DoRenderBundleCommand(&mCommands, type); | |
| break; | |
| } | |
| } | |
| } | |
| // EndRenderPass should have been called | |
| UNREACHABLE(); | |
| } | |
| }} // namespace dawn_native::opengl |