| // Copyright 2019 The Dawn Authors |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "tests/DawnTest.h" |
| |
| #include "common/Assert.h" |
| #include "utils/ComboRenderPipelineDescriptor.h" |
| #include "utils/WGPUHelpers.h" |
| |
| class MultisampledRenderingTest : public DawnTest { |
| protected: |
| void SetUp() override { |
| DawnTest::SetUp(); |
| |
| // TODO(crbug.com/dawn/738): Test output is wrong with D3D12 + WARP. |
| DAWN_SKIP_TEST_IF(IsD3D12() && IsWARP()); |
| |
| InitTexturesForTest(); |
| } |
| |
| void InitTexturesForTest() { |
| mMultisampledColorTexture = CreateTextureForRenderAttachment(kColorFormat, kSampleCount); |
| mMultisampledColorView = mMultisampledColorTexture.CreateView(); |
| mResolveTexture = CreateTextureForRenderAttachment(kColorFormat, 1); |
| mResolveView = mResolveTexture.CreateView(); |
| |
| mDepthStencilTexture = CreateTextureForRenderAttachment(kDepthStencilFormat, kSampleCount); |
| mDepthStencilView = mDepthStencilTexture.CreateView(); |
| } |
| |
| wgpu::RenderPipeline CreateRenderPipelineWithOneOutputForTest( |
| bool testDepth, |
| uint32_t sampleMask = 0xFFFFFFFF, |
| bool alphaToCoverageEnabled = false, |
| bool flipTriangle = false) { |
| const char* kFsOneOutputWithDepth = R"( |
| [[block]] struct U { |
| color : vec4<f32>; |
| depth : f32; |
| }; |
| [[group(0), binding(0)]] var<uniform> uBuffer : U; |
| |
| struct FragmentOut { |
| [[location(0)]] color : vec4<f32>; |
| [[builtin(frag_depth)]] depth : f32; |
| }; |
| |
| [[stage(fragment)]] fn main() -> FragmentOut { |
| var output : FragmentOut; |
| output.color = uBuffer.color; |
| output.depth = uBuffer.depth; |
| return output; |
| })"; |
| |
| const char* kFsOneOutputWithoutDepth = R"( |
| [[block]] struct U { |
| color : vec4<f32>; |
| }; |
| [[group(0), binding(0)]] var<uniform> uBuffer : U; |
| |
| [[stage(fragment)]] fn main() -> [[location(0)]] vec4<f32> { |
| return uBuffer.color; |
| })"; |
| |
| const char* fs = testDepth ? kFsOneOutputWithDepth : kFsOneOutputWithoutDepth; |
| |
| return CreateRenderPipelineForTest(fs, 1, testDepth, sampleMask, alphaToCoverageEnabled, |
| flipTriangle); |
| } |
| |
| wgpu::RenderPipeline CreateRenderPipelineWithTwoOutputsForTest( |
| uint32_t sampleMask = 0xFFFFFFFF, |
| bool alphaToCoverageEnabled = false) { |
| const char* kFsTwoOutputs = R"( |
| [[block]] struct U { |
| color0 : vec4<f32>; |
| color1 : vec4<f32>; |
| }; |
| [[group(0), binding(0)]] var<uniform> uBuffer : U; |
| |
| struct FragmentOut { |
| [[location(0)]] color0 : vec4<f32>; |
| [[location(1)]] color1 : vec4<f32>; |
| }; |
| |
| [[stage(fragment)]] fn main() -> FragmentOut { |
| var output : FragmentOut; |
| output.color0 = uBuffer.color0; |
| output.color1 = uBuffer.color1; |
| return output; |
| })"; |
| |
| return CreateRenderPipelineForTest(kFsTwoOutputs, 2, false, sampleMask, |
| alphaToCoverageEnabled); |
| } |
| |
| wgpu::Texture CreateTextureForRenderAttachment(wgpu::TextureFormat format, |
| uint32_t sampleCount, |
| uint32_t mipLevelCount = 1, |
| uint32_t arrayLayerCount = 1) { |
| wgpu::TextureDescriptor descriptor; |
| descriptor.dimension = wgpu::TextureDimension::e2D; |
| descriptor.size.width = kWidth << (mipLevelCount - 1); |
| descriptor.size.height = kHeight << (mipLevelCount - 1); |
| descriptor.size.depthOrArrayLayers = arrayLayerCount; |
| descriptor.sampleCount = sampleCount; |
| descriptor.format = format; |
| descriptor.mipLevelCount = mipLevelCount; |
| descriptor.usage = wgpu::TextureUsage::RenderAttachment | wgpu::TextureUsage::CopySrc; |
| return device.CreateTexture(&descriptor); |
| } |
| |
| void EncodeRenderPassForTest(wgpu::CommandEncoder commandEncoder, |
| const wgpu::RenderPassDescriptor& renderPass, |
| const wgpu::RenderPipeline& pipeline, |
| const float* uniformData, |
| uint32_t uniformDataSize) { |
| wgpu::Buffer uniformBuffer = utils::CreateBufferFromData( |
| device, uniformData, uniformDataSize, wgpu::BufferUsage::Uniform); |
| wgpu::BindGroup bindGroup = utils::MakeBindGroup(device, pipeline.GetBindGroupLayout(0), |
| {{0, uniformBuffer, 0, uniformDataSize}}); |
| |
| wgpu::RenderPassEncoder renderPassEncoder = commandEncoder.BeginRenderPass(&renderPass); |
| renderPassEncoder.SetPipeline(pipeline); |
| renderPassEncoder.SetBindGroup(0, bindGroup); |
| renderPassEncoder.Draw(3); |
| renderPassEncoder.EndPass(); |
| } |
| |
| void EncodeRenderPassForTest(wgpu::CommandEncoder commandEncoder, |
| const wgpu::RenderPassDescriptor& renderPass, |
| const wgpu::RenderPipeline& pipeline, |
| const wgpu::Color& color) { |
| const float uniformData[4] = {static_cast<float>(color.r), static_cast<float>(color.g), |
| static_cast<float>(color.b), static_cast<float>(color.a)}; |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, uniformData, |
| sizeof(float) * 4); |
| } |
| |
| utils::ComboRenderPassDescriptor CreateComboRenderPassDescriptorForTest( |
| std::initializer_list<wgpu::TextureView> colorViews, |
| std::initializer_list<wgpu::TextureView> resolveTargetViews, |
| wgpu::LoadOp colorLoadOp, |
| wgpu::LoadOp depthStencilLoadOp, |
| bool hasDepthStencilAttachment) { |
| ASSERT(colorViews.size() == resolveTargetViews.size()); |
| |
| constexpr wgpu::Color kClearColor = {0.0f, 0.0f, 0.0f, 0.0f}; |
| constexpr float kClearDepth = 1.0f; |
| |
| utils::ComboRenderPassDescriptor renderPass(colorViews); |
| uint32_t i = 0; |
| for (const wgpu::TextureView& resolveTargetView : resolveTargetViews) { |
| renderPass.cColorAttachments[i].loadOp = colorLoadOp; |
| renderPass.cColorAttachments[i].clearColor = kClearColor; |
| renderPass.cColorAttachments[i].resolveTarget = resolveTargetView; |
| ++i; |
| } |
| |
| renderPass.cDepthStencilAttachmentInfo.clearDepth = kClearDepth; |
| renderPass.cDepthStencilAttachmentInfo.depthLoadOp = depthStencilLoadOp; |
| |
| if (hasDepthStencilAttachment) { |
| renderPass.cDepthStencilAttachmentInfo.view = mDepthStencilView; |
| renderPass.depthStencilAttachment = &renderPass.cDepthStencilAttachmentInfo; |
| } |
| |
| return renderPass; |
| } |
| |
| void VerifyResolveTarget(const wgpu::Color& inputColor, |
| wgpu::Texture resolveTexture, |
| uint32_t mipmapLevel = 0, |
| uint32_t arrayLayer = 0, |
| const float msaaCoverage = 0.5f) { |
| // In this test we only check the pixel in the middle of the texture. |
| constexpr uint32_t kMiddleX = (kWidth - 1) / 2; |
| constexpr uint32_t kMiddleY = (kHeight - 1) / 2; |
| |
| RGBA8 expectedColor = ExpectedMSAAColor(inputColor, msaaCoverage); |
| EXPECT_TEXTURE_EQ(&expectedColor, resolveTexture, {kMiddleX, kMiddleY, arrayLayer}, {1, 1}, |
| mipmapLevel); |
| } |
| |
| constexpr static uint32_t kWidth = 3; |
| constexpr static uint32_t kHeight = 3; |
| constexpr static uint32_t kSampleCount = 4; |
| constexpr static wgpu::TextureFormat kColorFormat = wgpu::TextureFormat::RGBA8Unorm; |
| constexpr static wgpu::TextureFormat kDepthStencilFormat = |
| wgpu::TextureFormat::Depth24PlusStencil8; |
| |
| constexpr static uint32_t kFirstSampleMaskBit = 0x00000001; |
| constexpr static uint32_t kSecondSampleMaskBit = 0x00000002; |
| constexpr static uint32_t kThirdSampleMaskBit = 0x00000004; |
| constexpr static uint32_t kFourthSampleMaskBit = 0x00000008; |
| |
| wgpu::Texture mMultisampledColorTexture; |
| wgpu::TextureView mMultisampledColorView; |
| wgpu::Texture mResolveTexture; |
| wgpu::TextureView mResolveView; |
| wgpu::Texture mDepthStencilTexture; |
| wgpu::TextureView mDepthStencilView; |
| |
| wgpu::RenderPipeline CreateRenderPipelineForTest(const char* fs, |
| uint32_t numColorAttachments, |
| bool hasDepthStencilAttachment, |
| uint32_t sampleMask = 0xFFFFFFFF, |
| bool alphaToCoverageEnabled = false, |
| bool flipTriangle = false) { |
| utils::ComboRenderPipelineDescriptor2 pipelineDescriptor; |
| |
| // Draw a bottom-right triangle. In standard 4xMSAA pattern, for the pixels on diagonal, |
| // only two of the samples will be touched. |
| const char* vs = R"( |
| [[stage(vertex)]] |
| fn main([[builtin(vertex_index)]] VertexIndex : u32) -> [[builtin(position)]] vec4<f32> { |
| let pos : array<vec2<f32>, 3> = array<vec2<f32>, 3>( |
| vec2<f32>(-1.0, 1.0), |
| vec2<f32>( 1.0, 1.0), |
| vec2<f32>( 1.0, -1.0) |
| ); |
| return vec4<f32>(pos[VertexIndex], 0.0, 1.0); |
| })"; |
| |
| // Draw a bottom-left triangle. |
| const char* vsFlipped = R"( |
| [[stage(vertex)]] |
| fn main([[builtin(vertex_index)]] VertexIndex : u32) -> [[builtin(position)]] vec4<f32> { |
| let pos : array<vec2<f32>, 3> = array<vec2<f32>, 3>( |
| vec2<f32>(-1.0, 1.0), |
| vec2<f32>( 1.0, 1.0), |
| vec2<f32>(-1.0, -1.0) |
| ); |
| return vec4<f32>(pos[VertexIndex], 0.0, 1.0); |
| })"; |
| |
| if (flipTriangle) { |
| pipelineDescriptor.vertex.module = utils::CreateShaderModule(device, vsFlipped); |
| } else { |
| pipelineDescriptor.vertex.module = utils::CreateShaderModule(device, vs); |
| } |
| |
| pipelineDescriptor.cFragment.module = utils::CreateShaderModule(device, fs); |
| |
| if (hasDepthStencilAttachment) { |
| wgpu::DepthStencilState* depthStencil = |
| pipelineDescriptor.EnableDepthStencil(kDepthStencilFormat); |
| depthStencil->depthWriteEnabled = true; |
| depthStencil->depthCompare = wgpu::CompareFunction::Less; |
| } |
| |
| pipelineDescriptor.multisample.count = kSampleCount; |
| pipelineDescriptor.multisample.mask = sampleMask; |
| pipelineDescriptor.multisample.alphaToCoverageEnabled = alphaToCoverageEnabled; |
| |
| pipelineDescriptor.cFragment.targetCount = numColorAttachments; |
| for (uint32_t i = 0; i < numColorAttachments; ++i) { |
| pipelineDescriptor.cTargets[i].format = kColorFormat; |
| } |
| |
| wgpu::RenderPipeline pipeline = device.CreateRenderPipeline2(&pipelineDescriptor); |
| return pipeline; |
| } |
| |
| RGBA8 ExpectedMSAAColor(const wgpu::Color color, const double msaaCoverage) { |
| RGBA8 result; |
| result.r = static_cast<uint8_t>(std::min(255.0, 256 * color.r * msaaCoverage)); |
| result.g = static_cast<uint8_t>(std::min(255.0, 256 * color.g * msaaCoverage)); |
| result.b = static_cast<uint8_t>(std::min(255.0, 256 * color.b * msaaCoverage)); |
| result.a = static_cast<uint8_t>(std::min(255.0, 256 * color.a * msaaCoverage)); |
| return result; |
| } |
| }; |
| |
| // Test using one multisampled color attachment with resolve target can render correctly. |
| TEST_P(MultisampledRenderingTest, ResolveInto2DTexture) { |
| constexpr bool kTestDepth = false; |
| wgpu::RenderPipeline pipeline = CreateRenderPipelineWithOneOutputForTest(kTestDepth); |
| |
| constexpr wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, 0.8f}; |
| |
| // storeOp should not affect the result in the resolve target. |
| for (wgpu::StoreOp storeOp : {wgpu::StoreOp::Store, wgpu::StoreOp::Clear}) { |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| |
| // Draw a green triangle. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView}, {mResolveView}, wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, |
| kTestDepth); |
| renderPass.cColorAttachments[0].storeOp = storeOp; |
| std::array<float, 4> kUniformData = {kGreen.r, kGreen.g, kGreen.b, kGreen.a}; |
| constexpr uint32_t kSize = sizeof(kUniformData); |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kUniformData.data(), |
| kSize); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| VerifyResolveTarget(kGreen, mResolveTexture); |
| } |
| } |
| |
| // Test that a single-layer multisampled texture view can be created and resolved from. |
| TEST_P(MultisampledRenderingTest, ResolveFromSingleLayerArrayInto2DTexture) { |
| constexpr bool kTestDepth = false; |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::RenderPipeline pipeline = CreateRenderPipelineWithOneOutputForTest(kTestDepth); |
| |
| constexpr wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, 0.8f}; |
| |
| // Draw a green triangle. |
| { |
| wgpu::TextureViewDescriptor desc = {}; |
| desc.dimension = wgpu::TextureViewDimension::e2DArray; |
| desc.arrayLayerCount = 1; |
| |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorTexture.CreateView(&desc)}, {mResolveView}, wgpu::LoadOp::Clear, |
| wgpu::LoadOp::Clear, kTestDepth); |
| |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kGreen); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| VerifyResolveTarget(kGreen, mResolveTexture); |
| } |
| |
| // Test multisampled rendering with depth test works correctly. |
| TEST_P(MultisampledRenderingTest, MultisampledRenderingWithDepthTest) { |
| constexpr bool kTestDepth = true; |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::RenderPipeline pipeline = CreateRenderPipelineWithOneOutputForTest(kTestDepth); |
| |
| constexpr wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, 0.8f}; |
| constexpr wgpu::Color kRed = {0.8f, 0.0f, 0.0f, 0.8f}; |
| |
| // In first render pass we draw a green triangle with depth value == 0.2f. |
| { |
| utils::ComboRenderPassDescriptor renderPass = |
| CreateComboRenderPassDescriptorForTest({mMultisampledColorView}, {mResolveView}, |
| wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, true); |
| std::array<float, 5> kUniformData = {kGreen.r, kGreen.g, kGreen.b, kGreen.a, // Color |
| 0.2f}; // depth |
| constexpr uint32_t kSize = sizeof(kUniformData); |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kUniformData.data(), kSize); |
| } |
| |
| // In second render pass we draw a red triangle with depth value == 0.5f. |
| // This red triangle should not be displayed because it is behind the green one that is drawn in |
| // the last render pass. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView}, {mResolveView}, wgpu::LoadOp::Load, wgpu::LoadOp::Load, |
| kTestDepth); |
| |
| std::array<float, 5> kUniformData = {kRed.r, kRed.g, kRed.b, kRed.a, // color |
| 0.5f}; // depth |
| constexpr uint32_t kSize = sizeof(kUniformData); |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kUniformData.data(), kSize); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| // The color of the pixel in the middle of mResolveTexture should be green if MSAA resolve runs |
| // correctly with depth test. |
| VerifyResolveTarget(kGreen, mResolveTexture); |
| } |
| |
| // Test rendering into a multisampled color attachment and doing MSAA resolve in another render pass |
| // works correctly. |
| TEST_P(MultisampledRenderingTest, ResolveInAnotherRenderPass) { |
| constexpr bool kTestDepth = false; |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::RenderPipeline pipeline = CreateRenderPipelineWithOneOutputForTest(kTestDepth); |
| |
| constexpr wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, 0.8f}; |
| |
| // In first render pass we draw a green triangle and do not set the resolve target. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView}, {nullptr}, wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, |
| kTestDepth); |
| |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kGreen); |
| } |
| |
| // In second render pass we ony do MSAA resolve with no draw call. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView}, {mResolveView}, wgpu::LoadOp::Load, wgpu::LoadOp::Load, |
| kTestDepth); |
| |
| wgpu::RenderPassEncoder renderPassEncoder = commandEncoder.BeginRenderPass(&renderPass); |
| renderPassEncoder.EndPass(); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| VerifyResolveTarget(kGreen, mResolveTexture); |
| } |
| |
| // Test doing MSAA resolve into multiple resolve targets works correctly. |
| TEST_P(MultisampledRenderingTest, ResolveIntoMultipleResolveTargets) { |
| // TODO(dawn:462): Investigate backend validation failure. |
| DAWN_SKIP_TEST_IF(IsD3D12() && IsNvidia() && IsBackendValidationEnabled()); |
| |
| wgpu::TextureView multisampledColorView2 = |
| CreateTextureForRenderAttachment(kColorFormat, kSampleCount).CreateView(); |
| wgpu::Texture resolveTexture2 = CreateTextureForRenderAttachment(kColorFormat, 1); |
| wgpu::TextureView resolveView2 = resolveTexture2.CreateView(); |
| |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::RenderPipeline pipeline = CreateRenderPipelineWithTwoOutputsForTest(); |
| |
| constexpr wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, 0.8f}; |
| constexpr wgpu::Color kRed = {0.8f, 0.0f, 0.0f, 0.8f}; |
| constexpr bool kTestDepth = false; |
| |
| // Draw a red triangle to the first color attachment, and a blue triangle to the second color |
| // attachment, and do MSAA resolve on two render targets in one render pass. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView, multisampledColorView2}, {mResolveView, resolveView2}, |
| wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, kTestDepth); |
| |
| std::array<float, 8> kUniformData = { |
| static_cast<float>(kRed.r), static_cast<float>(kRed.g), |
| static_cast<float>(kRed.b), static_cast<float>(kRed.a), |
| static_cast<float>(kGreen.r), static_cast<float>(kGreen.g), |
| static_cast<float>(kGreen.b), static_cast<float>(kGreen.a)}; |
| constexpr uint32_t kSize = sizeof(kUniformData); |
| |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kUniformData.data(), kSize); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| VerifyResolveTarget(kRed, mResolveTexture); |
| VerifyResolveTarget(kGreen, resolveTexture2); |
| } |
| |
| // Test doing MSAA resolve on one multisampled texture twice works correctly. |
| TEST_P(MultisampledRenderingTest, ResolveOneMultisampledTextureTwice) { |
| constexpr bool kTestDepth = false; |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::RenderPipeline pipeline = CreateRenderPipelineWithOneOutputForTest(kTestDepth); |
| |
| constexpr wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, 0.8f}; |
| |
| wgpu::Texture resolveTexture2 = CreateTextureForRenderAttachment(kColorFormat, 1); |
| |
| // In first render pass we draw a green triangle and specify mResolveView as the resolve target. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView}, {mResolveView}, wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, |
| kTestDepth); |
| |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kGreen); |
| } |
| |
| // In second render pass we do MSAA resolve into resolveTexture2. |
| { |
| wgpu::TextureView resolveView2 = resolveTexture2.CreateView(); |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView}, {resolveView2}, wgpu::LoadOp::Load, wgpu::LoadOp::Load, |
| kTestDepth); |
| |
| wgpu::RenderPassEncoder renderPassEncoder = commandEncoder.BeginRenderPass(&renderPass); |
| renderPassEncoder.EndPass(); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| VerifyResolveTarget(kGreen, mResolveTexture); |
| VerifyResolveTarget(kGreen, resolveTexture2); |
| } |
| |
| // Test using a layer of a 2D texture as resolve target works correctly. |
| TEST_P(MultisampledRenderingTest, ResolveIntoOneMipmapLevelOf2DTexture) { |
| // TODO(dawn:462): Investigate backend validation failure. |
| DAWN_SKIP_TEST_IF(IsD3D12() && IsBackendValidationEnabled()); |
| |
| constexpr uint32_t kBaseMipLevel = 2; |
| |
| wgpu::TextureViewDescriptor textureViewDescriptor; |
| textureViewDescriptor.dimension = wgpu::TextureViewDimension::e2D; |
| textureViewDescriptor.format = kColorFormat; |
| textureViewDescriptor.baseArrayLayer = 0; |
| textureViewDescriptor.arrayLayerCount = 1; |
| textureViewDescriptor.mipLevelCount = 1; |
| textureViewDescriptor.baseMipLevel = kBaseMipLevel; |
| |
| wgpu::Texture resolveTexture = |
| CreateTextureForRenderAttachment(kColorFormat, 1, kBaseMipLevel + 1, 1); |
| wgpu::TextureView resolveView = resolveTexture.CreateView(&textureViewDescriptor); |
| |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| constexpr wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, 0.8f}; |
| constexpr bool kTestDepth = false; |
| |
| // Draw a green triangle and do MSAA resolve. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView}, {resolveView}, wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, |
| kTestDepth); |
| wgpu::RenderPipeline pipeline = CreateRenderPipelineWithOneOutputForTest(kTestDepth); |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kGreen); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| VerifyResolveTarget(kGreen, resolveTexture, kBaseMipLevel, 0); |
| } |
| |
| // Test using a level or a layer of a 2D array texture as resolve target works correctly. |
| TEST_P(MultisampledRenderingTest, ResolveInto2DArrayTexture) { |
| // TODO(dawn:462): Investigate backend validation failure. |
| DAWN_SKIP_TEST_IF(IsD3D12() && IsBackendValidationEnabled()); |
| |
| wgpu::TextureView multisampledColorView2 = |
| CreateTextureForRenderAttachment(kColorFormat, kSampleCount).CreateView(); |
| |
| wgpu::TextureViewDescriptor baseTextureViewDescriptor; |
| baseTextureViewDescriptor.dimension = wgpu::TextureViewDimension::e2D; |
| baseTextureViewDescriptor.format = kColorFormat; |
| baseTextureViewDescriptor.arrayLayerCount = 1; |
| baseTextureViewDescriptor.mipLevelCount = 1; |
| |
| // Create resolveTexture1 with only 1 mipmap level. |
| constexpr uint32_t kBaseArrayLayer1 = 2; |
| constexpr uint32_t kBaseMipLevel1 = 0; |
| wgpu::Texture resolveTexture1 = |
| CreateTextureForRenderAttachment(kColorFormat, 1, kBaseMipLevel1 + 1, kBaseArrayLayer1 + 1); |
| wgpu::TextureViewDescriptor resolveViewDescriptor1 = baseTextureViewDescriptor; |
| resolveViewDescriptor1.baseArrayLayer = kBaseArrayLayer1; |
| resolveViewDescriptor1.baseMipLevel = kBaseMipLevel1; |
| wgpu::TextureView resolveView1 = resolveTexture1.CreateView(&resolveViewDescriptor1); |
| |
| // Create resolveTexture2 with (kBaseMipLevel2 + 1) mipmap levels and resolve into its last |
| // mipmap level. |
| constexpr uint32_t kBaseArrayLayer2 = 5; |
| constexpr uint32_t kBaseMipLevel2 = 3; |
| wgpu::Texture resolveTexture2 = |
| CreateTextureForRenderAttachment(kColorFormat, 1, kBaseMipLevel2 + 1, kBaseArrayLayer2 + 1); |
| wgpu::TextureViewDescriptor resolveViewDescriptor2 = baseTextureViewDescriptor; |
| resolveViewDescriptor2.baseArrayLayer = kBaseArrayLayer2; |
| resolveViewDescriptor2.baseMipLevel = kBaseMipLevel2; |
| wgpu::TextureView resolveView2 = resolveTexture2.CreateView(&resolveViewDescriptor2); |
| |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::RenderPipeline pipeline = CreateRenderPipelineWithTwoOutputsForTest(); |
| |
| constexpr wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, 0.8f}; |
| constexpr wgpu::Color kRed = {0.8f, 0.0f, 0.0f, 0.8f}; |
| constexpr bool kTestDepth = false; |
| |
| // Draw a red triangle to the first color attachment, and a green triangle to the second color |
| // attachment, and do MSAA resolve on two render targets in one render pass. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView, multisampledColorView2}, {resolveView1, resolveView2}, |
| wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, kTestDepth); |
| |
| std::array<float, 8> kUniformData = {kRed.r, kRed.g, kRed.b, kRed.a, // color1 |
| kGreen.r, kGreen.g, kGreen.b, kGreen.a}; // color2 |
| constexpr uint32_t kSize = sizeof(kUniformData); |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kUniformData.data(), kSize); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| VerifyResolveTarget(kRed, resolveTexture1, kBaseMipLevel1, kBaseArrayLayer1); |
| VerifyResolveTarget(kGreen, resolveTexture2, kBaseMipLevel2, kBaseArrayLayer2); |
| } |
| |
| // Test using one multisampled color attachment with resolve target can render correctly |
| // with a non-default sample mask. |
| TEST_P(MultisampledRenderingTest, ResolveInto2DTextureWithSampleMask) { |
| constexpr bool kTestDepth = false; |
| // The second and third samples are included, |
| // only the second one is covered by the triangle. |
| constexpr uint32_t kSampleMask = kSecondSampleMaskBit | kThirdSampleMaskBit; |
| constexpr float kMSAACoverage = 0.25f; |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::RenderPipeline pipeline = |
| CreateRenderPipelineWithOneOutputForTest(kTestDepth, kSampleMask); |
| |
| constexpr wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, 0.8f}; |
| |
| // Draw a green triangle. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView}, {mResolveView}, wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, |
| kTestDepth); |
| |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kGreen); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| VerifyResolveTarget(kGreen, mResolveTexture, 0, 0, kMSAACoverage); |
| } |
| |
| // Test using one multisampled color attachment with resolve target can render correctly |
| // with the final sample mask empty. |
| TEST_P(MultisampledRenderingTest, ResolveInto2DTextureWithEmptyFinalSampleMask) { |
| constexpr bool kTestDepth = false; |
| // The third and fourth samples are included, |
| // none of which is covered by the triangle. |
| constexpr uint32_t kSampleMask = kThirdSampleMaskBit | kFourthSampleMaskBit; |
| constexpr float kMSAACoverage = 0.00f; |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::RenderPipeline pipeline = |
| CreateRenderPipelineWithOneOutputForTest(kTestDepth, kSampleMask); |
| |
| constexpr wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, 0.8f}; |
| |
| // Draw a green triangle. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView}, {mResolveView}, wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, |
| kTestDepth); |
| |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kGreen); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| VerifyResolveTarget(kGreen, mResolveTexture, 0, 0, kMSAACoverage); |
| } |
| |
| // Test doing MSAA resolve into multiple resolve targets works correctly with a non-default sample |
| // mask. |
| TEST_P(MultisampledRenderingTest, ResolveIntoMultipleResolveTargetsWithSampleMask) { |
| wgpu::TextureView multisampledColorView2 = |
| CreateTextureForRenderAttachment(kColorFormat, kSampleCount).CreateView(); |
| wgpu::Texture resolveTexture2 = CreateTextureForRenderAttachment(kColorFormat, 1); |
| wgpu::TextureView resolveView2 = resolveTexture2.CreateView(); |
| |
| // The first and fourth samples are included, |
| // only the first one is covered by the triangle. |
| constexpr uint32_t kSampleMask = kFirstSampleMaskBit | kFourthSampleMaskBit; |
| constexpr float kMSAACoverage = 0.25f; |
| |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::RenderPipeline pipeline = CreateRenderPipelineWithTwoOutputsForTest(kSampleMask); |
| |
| constexpr wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, 0.8f}; |
| constexpr wgpu::Color kRed = {0.8f, 0.0f, 0.0f, 0.8f}; |
| constexpr bool kTestDepth = false; |
| |
| // Draw a red triangle to the first color attachment, and a blue triangle to the second color |
| // attachment, and do MSAA resolve on two render targets in one render pass. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView, multisampledColorView2}, {mResolveView, resolveView2}, |
| wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, kTestDepth); |
| |
| std::array<float, 8> kUniformData = {kRed.r, kRed.g, kRed.b, kRed.a, // color1 |
| kGreen.r, kGreen.g, kGreen.b, kGreen.a}; // color2 |
| constexpr uint32_t kSize = sizeof(kUniformData); |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kUniformData.data(), kSize); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| VerifyResolveTarget(kRed, mResolveTexture, 0, 0, kMSAACoverage); |
| VerifyResolveTarget(kGreen, resolveTexture2, 0, 0, kMSAACoverage); |
| } |
| |
| // Test multisampled rendering with depth test works correctly with a non-default sample mask. |
| TEST_P(MultisampledRenderingTest, MultisampledRenderingWithDepthTestAndSampleMask) { |
| constexpr bool kTestDepth = true; |
| // The second sample is included in the first render pass and it's covered by the triangle. |
| constexpr uint32_t kSampleMaskGreen = kSecondSampleMaskBit; |
| // The first and second samples are included in the second render pass, |
| // both are covered by the triangle. |
| constexpr uint32_t kSampleMaskRed = kFirstSampleMaskBit | kSecondSampleMaskBit; |
| constexpr float kMSAACoverage = 0.50f; |
| |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::RenderPipeline pipelineGreen = |
| CreateRenderPipelineWithOneOutputForTest(kTestDepth, kSampleMaskGreen); |
| wgpu::RenderPipeline pipelineRed = |
| CreateRenderPipelineWithOneOutputForTest(kTestDepth, kSampleMaskRed); |
| |
| constexpr wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, 0.8f}; |
| constexpr wgpu::Color kRed = {0.8f, 0.0f, 0.0f, 0.8f}; |
| |
| // In first render pass we draw a green triangle with depth value == 0.2f. |
| // We will only write to the second sample. |
| { |
| utils::ComboRenderPassDescriptor renderPass = |
| CreateComboRenderPassDescriptorForTest({mMultisampledColorView}, {mResolveView}, |
| wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, true); |
| std::array<float, 5> kUniformData = {kGreen.r, kGreen.g, kGreen.b, kGreen.a, // Color |
| 0.2f}; // depth |
| constexpr uint32_t kSize = sizeof(kUniformData); |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipelineGreen, kUniformData.data(), |
| kSize); |
| } |
| |
| // In second render pass we draw a red triangle with depth value == 0.5f. |
| // We will only write to the first sample, since the second one is red with a smaller depth |
| // value. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView}, {mResolveView}, wgpu::LoadOp::Load, wgpu::LoadOp::Load, |
| kTestDepth); |
| |
| std::array<float, 5> kUniformData = {kRed.r, kRed.g, kRed.b, kRed.a, // color |
| 0.5f}; // depth |
| constexpr uint32_t kSize = sizeof(kUniformData); |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipelineRed, kUniformData.data(), |
| kSize); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| constexpr wgpu::Color kHalfGreenHalfRed = {(kGreen.r + kRed.r) / 2.0, (kGreen.g + kRed.g) / 2.0, |
| (kGreen.b + kRed.b) / 2.0, |
| (kGreen.a + kRed.a) / 2.0}; |
| |
| // The color of the pixel in the middle of mResolveTexture should be half green and half |
| // red if MSAA resolve runs correctly with depth test. |
| VerifyResolveTarget(kHalfGreenHalfRed, mResolveTexture, 0, 0, kMSAACoverage); |
| } |
| |
| // Test using one multisampled color attachment with resolve target can render correctly |
| // with non-default sample mask and shader-output mask. |
| TEST_P(MultisampledRenderingTest, ResolveInto2DTextureWithSampleMaskAndShaderOutputMask) { |
| // TODO(github.com/KhronosGroup/SPIRV-Cross/issues/1626): SPIRV-Cross produces bad GLSL for |
| // unsigned SampleMask builtins |
| DAWN_SKIP_TEST_IF(HasToggleEnabled("use_tint_generator") && (IsOpenGL() || IsOpenGLES())); |
| |
| // TODO(crbug.com/dawn/673): Work around or enforce via validation that sample variables are not |
| // supported on some platforms. |
| DAWN_SKIP_TEST_IF(HasToggleEnabled("disable_sample_variables")); |
| |
| // TODO(cwallez@chromium.org): Fails on Metal / D3D12 because SPIRV-Cross produces bad shaders |
| // for the SPIR-V outputted by Tint. Reenable once we use Tint's MSL / HLSL generators. |
| DAWN_SKIP_TEST_IF(IsD3D12() || IsMetal()); |
| |
| constexpr bool kTestDepth = false; |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| |
| // The second and third samples are included in the shader-output mask. |
| // The first and third samples are included in the sample mask. |
| // Since we're now looking at a fully covered pixel, the rasterization mask |
| // includes all the samples. |
| // Thus the final mask includes only the third sample. |
| constexpr float kMSAACoverage = 0.25f; |
| constexpr uint32_t kSampleMask = kFirstSampleMaskBit | kThirdSampleMaskBit; |
| const char* fs = R"( |
| [[block]] struct U { |
| color : vec4<f32>; |
| }; |
| [[group(0), binding(0)]] var<uniform> uBuffer : U; |
| |
| struct FragmentOut { |
| [[location(0)]] color : vec4<f32>; |
| [[builtin(sample_mask)]] sampleMask : u32; |
| }; |
| |
| [[stage(fragment)]] fn main() -> FragmentOut { |
| var output : FragmentOut; |
| output.color = uBuffer.color; |
| output.sampleMask = 6u; |
| return output; |
| })"; |
| |
| wgpu::RenderPipeline pipeline = CreateRenderPipelineForTest(fs, 1, false, kSampleMask); |
| constexpr wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, 0.8f}; |
| |
| // Draw a green triangle. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView}, {mResolveView}, wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, |
| kTestDepth); |
| |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kGreen); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| RGBA8 expectedColor = ExpectedMSAAColor(kGreen, kMSAACoverage); |
| EXPECT_TEXTURE_EQ(&expectedColor, mResolveTexture, {1, 0}, {1, 1}); |
| } |
| |
| // Test doing MSAA resolve into multiple resolve targets works correctly with a non-default |
| // shader-output mask. |
| TEST_P(MultisampledRenderingTest, ResolveIntoMultipleResolveTargetsWithShaderOutputMask) { |
| // TODO(github.com/KhronosGroup/SPIRV-Cross/issues/1626): SPIRV-Cross produces bad GLSL for |
| // unsigned SampleMask builtins |
| DAWN_SKIP_TEST_IF(HasToggleEnabled("use_tint_generator") && (IsOpenGL() || IsOpenGLES())); |
| |
| // TODO(crbug.com/dawn/673): Work around or enforce via validation that sample variables are not |
| // supported on some platforms. |
| DAWN_SKIP_TEST_IF(HasToggleEnabled("disable_sample_variables")); |
| |
| // TODO(cwallez@chromium.org): Fails on Metal / D3D12 because SPIRV-Cross produces bad shaders |
| // for the SPIR-V outputted by Tint. Reenable once we use Tint's MSL / HLSL generators. |
| DAWN_SKIP_TEST_IF(IsD3D12() || IsMetal()); |
| |
| wgpu::TextureView multisampledColorView2 = |
| CreateTextureForRenderAttachment(kColorFormat, kSampleCount).CreateView(); |
| wgpu::Texture resolveTexture2 = CreateTextureForRenderAttachment(kColorFormat, 1); |
| wgpu::TextureView resolveView2 = resolveTexture2.CreateView(); |
| |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| // The second and third samples are included in the shader-output mask, |
| // only the first one is covered by the triangle. |
| constexpr float kMSAACoverage = 0.25f; |
| const char* fs = R"( |
| [[block]] struct U { |
| color0 : vec4<f32>; |
| color1 : vec4<f32>; |
| }; |
| [[group(0), binding(0)]] var<uniform> uBuffer : U; |
| |
| struct FragmentOut { |
| [[location(0)]] color0 : vec4<f32>; |
| [[location(1)]] color1 : vec4<f32>; |
| [[builtin(sample_mask)]] sampleMask : u32; |
| }; |
| |
| [[stage(fragment)]] fn main() -> FragmentOut { |
| var output : FragmentOut; |
| output.color0 = uBuffer.color0; |
| output.color1 = uBuffer.color1; |
| output.sampleMask = 6u; |
| return output; |
| })"; |
| |
| wgpu::RenderPipeline pipeline = CreateRenderPipelineForTest(fs, 2, false); |
| constexpr wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, 0.8f}; |
| constexpr wgpu::Color kRed = {0.8f, 0.0f, 0.0f, 0.8f}; |
| constexpr bool kTestDepth = false; |
| |
| // Draw a red triangle to the first color attachment, and a blue triangle to the second color |
| // attachment, and do MSAA resolve on two render targets in one render pass. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView, multisampledColorView2}, {mResolveView, resolveView2}, |
| wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, kTestDepth); |
| |
| std::array<float, 8> kUniformData = {kRed.r, kRed.g, kRed.b, kRed.a, // color1 |
| kGreen.r, kGreen.g, kGreen.b, kGreen.a}; // color2 |
| constexpr uint32_t kSize = sizeof(kUniformData); |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kUniformData.data(), kSize); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| VerifyResolveTarget(kRed, mResolveTexture, 0, 0, kMSAACoverage); |
| VerifyResolveTarget(kGreen, resolveTexture2, 0, 0, kMSAACoverage); |
| } |
| |
| // Test using one multisampled color attachment with resolve target can render correctly |
| // with alphaToCoverageEnabled. |
| TEST_P(MultisampledRenderingTest, ResolveInto2DTextureWithAlphaToCoverage) { |
| constexpr bool kTestDepth = false; |
| constexpr uint32_t kSampleMask = 0xFFFFFFFF; |
| constexpr bool kAlphaToCoverageEnabled = true; |
| |
| // Setting alpha <= 0 must result in alpha-to-coverage mask being empty. |
| // Setting alpha = 0.5f should result in alpha-to-coverage mask including half the samples, |
| // but this is not guaranteed by the spec. The Metal spec seems to guarantee that this is |
| // indeed the case. |
| // Setting alpha >= 1 must result in alpha-to-coverage mask being full. |
| for (float alpha : {-1.0f, 0.0f, 0.5f, 1.0f, 2.0f}) { |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::RenderPipeline pipeline = CreateRenderPipelineWithOneOutputForTest( |
| kTestDepth, kSampleMask, kAlphaToCoverageEnabled); |
| |
| const wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, alpha}; |
| |
| // Draw a green triangle. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView}, {mResolveView}, wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, |
| kTestDepth); |
| |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kGreen); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| // For alpha = {0, 0.5, 1} we expect msaaCoverage to correspond to the value of alpha. |
| float msaaCoverage = alpha; |
| if (alpha < 0.0f) { |
| msaaCoverage = 0.0f; |
| } |
| if (alpha > 1.0f) { |
| msaaCoverage = 1.0f; |
| } |
| |
| RGBA8 expectedColor = ExpectedMSAAColor(kGreen, msaaCoverage); |
| EXPECT_TEXTURE_EQ(&expectedColor, mResolveTexture, {1, 0}, {1, 1}); |
| } |
| } |
| |
| // Test doing MSAA resolve into multiple resolve targets works correctly with |
| // alphaToCoverage. The alphaToCoverage mask is computed based on the alpha |
| // component of the first color render attachment. |
| TEST_P(MultisampledRenderingTest, ResolveIntoMultipleResolveTargetsWithAlphaToCoverage) { |
| wgpu::TextureView multisampledColorView2 = |
| CreateTextureForRenderAttachment(kColorFormat, kSampleCount).CreateView(); |
| wgpu::Texture resolveTexture2 = CreateTextureForRenderAttachment(kColorFormat, 1); |
| wgpu::TextureView resolveView2 = resolveTexture2.CreateView(); |
| constexpr uint32_t kSampleMask = 0xFFFFFFFF; |
| constexpr float kMSAACoverage = 0.50f; |
| constexpr bool kAlphaToCoverageEnabled = true; |
| |
| // The alpha-to-coverage mask should not depend on the alpha component of the |
| // second color render attachment. |
| // We test alpha = 0.51f and 0.99f instead of 0.50f and 1.00f because there are some rounding |
| // differences on QuadroP400 devices in that case. |
| for (float alpha : {0.0f, 0.51f, 0.99f}) { |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::RenderPipeline pipeline = |
| CreateRenderPipelineWithTwoOutputsForTest(kSampleMask, kAlphaToCoverageEnabled); |
| |
| constexpr wgpu::Color kRed = {0.8f, 0.0f, 0.0f, 0.51f}; |
| const wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, alpha}; |
| constexpr bool kTestDepth = false; |
| |
| // Draw a red triangle to the first color attachment, and a blue triangle to the second |
| // color attachment, and do MSAA resolve on two render targets in one render pass. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView, multisampledColorView2}, {mResolveView, resolveView2}, |
| wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, kTestDepth); |
| |
| std::array<float, 8> kUniformData = { |
| static_cast<float>(kRed.r), static_cast<float>(kRed.g), |
| static_cast<float>(kRed.b), static_cast<float>(kRed.a), |
| static_cast<float>(kGreen.r), static_cast<float>(kGreen.g), |
| static_cast<float>(kGreen.b), static_cast<float>(kGreen.a)}; |
| constexpr uint32_t kSize = sizeof(kUniformData); |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kUniformData.data(), |
| kSize); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| // Alpha to coverage affects both the color outputs, but the mask is computed |
| // using only the first one. |
| RGBA8 expectedRed = ExpectedMSAAColor(kRed, kMSAACoverage); |
| RGBA8 expectedGreen = ExpectedMSAAColor(kGreen, kMSAACoverage); |
| EXPECT_TEXTURE_EQ(&expectedRed, mResolveTexture, {1, 0}, {1, 1}); |
| EXPECT_TEXTURE_EQ(&expectedGreen, resolveTexture2, {1, 0}, {1, 1}); |
| } |
| } |
| |
| // Test multisampled rendering with depth test works correctly with alphaToCoverage. |
| TEST_P(MultisampledRenderingTest, MultisampledRenderingWithDepthTestAndAlphaToCoverage) { |
| // This test fails because Swiftshader is off-by-one with its ((a+b)/2 + (c+d)/2)/2 fast resolve |
| // algorithm. |
| DAWN_SKIP_TEST_IF(IsSwiftshader() || IsANGLE()); |
| |
| constexpr bool kTestDepth = true; |
| constexpr uint32_t kSampleMask = 0xFFFFFFFF; |
| |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::RenderPipeline pipelineGreen = |
| CreateRenderPipelineWithOneOutputForTest(kTestDepth, kSampleMask, true); |
| wgpu::RenderPipeline pipelineRed = |
| CreateRenderPipelineWithOneOutputForTest(kTestDepth, kSampleMask, false); |
| |
| // We test alpha = 0.51f and 0.81f instead of 0.50f and 0.80f because there are some |
| // rounding differences on QuadroP400 devices in that case. |
| constexpr wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, 0.51f}; |
| constexpr wgpu::Color kRed = {0.8f, 0.0f, 0.0f, 0.81f}; |
| |
| // In first render pass we draw a green triangle with depth value == 0.2f. |
| // We will only write to half the samples since the alphaToCoverage mode |
| // is enabled for that render pass. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView}, {mResolveView}, wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, |
| kTestDepth); |
| std::array<float, 5> kUniformData = {kGreen.r, kGreen.g, kGreen.b, kGreen.a, // Color |
| 0.2f}; // depth |
| constexpr uint32_t kSize = sizeof(kUniformData); |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipelineGreen, kUniformData.data(), |
| kSize); |
| } |
| |
| // In second render pass we draw a red triangle with depth value == 0.5f. |
| // We will write to all the samples since the alphaToCoverageMode is diabled for |
| // that render pass. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView}, {mResolveView}, wgpu::LoadOp::Load, wgpu::LoadOp::Load, |
| kTestDepth); |
| |
| std::array<float, 5> kUniformData = {kRed.r, kRed.g, kRed.b, kRed.a, // color |
| 0.5f}; // depth |
| constexpr uint32_t kSize = sizeof(kUniformData); |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipelineRed, kUniformData.data(), |
| kSize); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| constexpr wgpu::Color kHalfGreenHalfRed = {(kGreen.r + kRed.r) / 2.0, (kGreen.g + kRed.g) / 2.0, |
| (kGreen.b + kRed.b) / 2.0, |
| (kGreen.a + kRed.a) / 2.0}; |
| RGBA8 expectedColor = ExpectedMSAAColor(kHalfGreenHalfRed, 1.0f); |
| |
| EXPECT_TEXTURE_EQ(&expectedColor, mResolveTexture, {1, 0}, {1, 1}); |
| } |
| |
| // Test using one multisampled color attachment with resolve target can render correctly |
| // with alphaToCoverageEnabled and a sample mask. |
| TEST_P(MultisampledRenderingTest, ResolveInto2DTextureWithAlphaToCoverageAndSampleMask) { |
| // This test fails because Swiftshader is off-by-one with its ((a+b)/2 + (c+d)/2)/2 fast resolve |
| // algorithm. |
| DAWN_SKIP_TEST_IF(IsSwiftshader() || IsANGLE()); |
| |
| // TODO(dawn:491): This doesn't work on Metal, because we're using both the shader-output |
| // mask (emulting the sampleMask from RenderPipeline) and alpha-to-coverage at the same |
| // time. See the issue: https://github.com/gpuweb/gpuweb/issues/959. |
| DAWN_SKIP_TEST_IF(IsMetal()); |
| |
| constexpr bool kTestDepth = false; |
| constexpr float kMSAACoverage = 0.50f; |
| constexpr uint32_t kSampleMask = kFirstSampleMaskBit | kThirdSampleMaskBit; |
| constexpr bool kAlphaToCoverageEnabled = true; |
| |
| // For those values of alpha we expect the proportion of samples to be covered |
| // to correspond to the value of alpha. |
| // We're assuming in the case of alpha = 0.50f that the implementation |
| // dependendent algorithm will choose exactly one of the first and third samples. |
| for (float alpha : {0.0f, 0.50f, 1.00f}) { |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::RenderPipeline pipeline = CreateRenderPipelineWithOneOutputForTest( |
| kTestDepth, kSampleMask, kAlphaToCoverageEnabled); |
| |
| const wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, alpha - 0.01f}; |
| |
| // Draw a green triangle. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView}, {mResolveView}, wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, |
| kTestDepth); |
| |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kGreen); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| RGBA8 expectedColor = ExpectedMSAAColor(kGreen, kMSAACoverage * alpha); |
| EXPECT_TEXTURE_EQ(&expectedColor, mResolveTexture, {1, 0}, {1, 1}); |
| } |
| } |
| |
| // Test using one multisampled color attachment with resolve target can render correctly |
| // with alphaToCoverageEnabled and a rasterization mask. |
| TEST_P(MultisampledRenderingTest, ResolveInto2DTextureWithAlphaToCoverageAndRasterizationMask) { |
| // This test fails because Swiftshader is off-by-one with its ((a+b)/2 + (c+d)/2)/2 fast resolve |
| // algorithm. |
| DAWN_SKIP_TEST_IF(IsSwiftshader() || IsANGLE()); |
| |
| constexpr bool kTestDepth = false; |
| constexpr float kMSAACoverage = 0.50f; |
| constexpr uint32_t kSampleMask = 0xFFFFFFFF; |
| constexpr bool kAlphaToCoverageEnabled = true; |
| constexpr bool kFlipTriangle = true; |
| |
| // For those values of alpha we expect the proportion of samples to be covered |
| // to correspond to the value of alpha. |
| // We're assuming in the case of alpha = 0.50f that the implementation |
| // dependendent algorithm will choose exactly one of the samples covered by the |
| // triangle. |
| for (float alpha : {0.0f, 0.50f, 1.00f}) { |
| wgpu::CommandEncoder commandEncoder = device.CreateCommandEncoder(); |
| wgpu::RenderPipeline pipeline = CreateRenderPipelineWithOneOutputForTest( |
| kTestDepth, kSampleMask, kAlphaToCoverageEnabled, kFlipTriangle); |
| |
| const wgpu::Color kGreen = {0.0f, 0.8f, 0.0f, alpha - 0.01f}; |
| |
| // Draw a green triangle. |
| { |
| utils::ComboRenderPassDescriptor renderPass = CreateComboRenderPassDescriptorForTest( |
| {mMultisampledColorView}, {mResolveView}, wgpu::LoadOp::Clear, wgpu::LoadOp::Clear, |
| kTestDepth); |
| |
| EncodeRenderPassForTest(commandEncoder, renderPass, pipeline, kGreen); |
| } |
| |
| wgpu::CommandBuffer commandBuffer = commandEncoder.Finish(); |
| queue.Submit(1, &commandBuffer); |
| |
| VerifyResolveTarget(kGreen, mResolveTexture, 0, 0, kMSAACoverage * alpha); |
| } |
| } |
| |
| DAWN_INSTANTIATE_TEST(MultisampledRenderingTest, |
| D3D12Backend(), |
| D3D12Backend({}, {"use_d3d12_resource_heap_tier2"}), |
| D3D12Backend({}, {"use_d3d12_render_pass"}), |
| MetalBackend(), |
| OpenGLBackend(), |
| OpenGLESBackend(), |
| VulkanBackend(), |
| MetalBackend({"emulate_store_and_msaa_resolve"}), |
| MetalBackend({"always_resolve_into_zero_level_and_layer"}), |
| MetalBackend({"always_resolve_into_zero_level_and_layer", |
| "emulate_store_and_msaa_resolve"})); |
